Some of dout format do not include newline in the end,
fix for the files which are in fs/ceph and net/ceph directories,
and changing printk to dout for printing debug info in super.c
Signed-off-by: Chengguang Xu <cgxu519@icloud.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If the layout is "fancy", we need to be able to rearrange the provided
bio_vecs in stripe unit chunks to make it possible for the messenger to
read/write directly from/to the provided data buffer, without employing
a temporary data buffer for assembling the result.
Higher level bio_vec arrays are generally immutable, so this requires
copying into a private array. Only the bio_vecs themselves are shuffled
around, not the actual data. OWN_BVECS doesn't own any pages.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
rbd_parent_request_create() takes a ref on obj_req for child_img_req.
There is no point in doing that because child_img_req is created on
behalf of obj_req -- obj_req is the initiator and can't be completed
before child_img_req.
Open-code the rest of rbd_parent_request_create() and remove it along
with rbd_parent_request_destroy().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
A whole-object layered discard is implemented as a truncate rather
than a delete: a dummy object is needed to prevent the CoW machinery
from kicking in. However, a truncate on a non-existent object is
a no-op. If the object doesn't exist in HEAD, a discard request is
effectively ignored, which violates our "discard zeroes data" promise
and breaks REQ_OP_WRITE_ZEROES implementation.
A non-exclusive create on an existing object is also a no-op, so the
fix is to do a compound create+truncate instead.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In preparation for rbd "fancy" striping, replace obj_req->img_offset
with obj_req->img_extents. A single starting offset isn't sufficient
because we want only one OSD request per object and will merge adjacent
object extents in ceph_file_to_extents(). The final object extent may
map into multiple different byte ranges in the image.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
obj_req->object_no -> obj_req->ex.oe_objno
obj_req->offset -> obj_req->ex.oe_off
obj_req->length -> obj_req->ex.oe_len
... and use ex for linking object requests to image requests.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
All object requests are associated with an image request now -- avoid
duplicating the same info in each object request.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Do away with partial request completions and all the associated
complexity. Individual object requests no longer need to be completed
in order -- when the last one becomes ready, we complete the entire
higher level request all at once.
This also wraps up the conversion to a state machine model and
eliminates the recursion described in commit 6d69bb536b ("rbd:
prevent kernel stack blow up on rbd map").
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It should be void now. Also, object requests are unlinked only in
image request destructor, which can't run before rbd_img_request_put(),
so no need for _safe.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
No need to pass rbd_dev and op_type to rbd_osd_req_create(): there are
no standalone (!IMG_DATA) object requests anymore and osd_req->r_flags
can be set in rbd_osd_req_format_{read,write}().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The notable changes are:
- instead of explicitly stat'ing the object to see if it exists before
issuing the write, send the write optimistically along with the stat
in a single OSD request
- zero copyup optimization
- all object requests are associated with an image request and have
a valid ->img_request pointer; there are no standalone (!IMG_DATA)
object requests anymore
- code is structured as a state machine (vs a bunch of callbacks with
implicit state)
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
rbd needs this for null copyups -- if copyup data is all zeroes, we
want to save some I/O and network bandwidth. See rbd_obj_issue_copyup()
in the next commit.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
In preparation for rbd "fancy" striping which requires bio_vec arrays,
wire up BVECS data type and kill off PAGES data type. There is nothing
wrong with using page vectors for copyup requests -- it's just less
iterator boilerplate code to write for the new striping framework.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
In preparation for rbd "fancy" striping, introduce ceph_bvec_iter for
working with bio_vec array data buffers. The wrappers are trivial, but
make it look similar to ceph_bio_iter.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The initiating object request is the proper owner -- save a bit of
space.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
obj_req->pages is for provided data buffers. stat requests are
internal and should be NODATA.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
The reason we clone bios is to be able to give each object request
(and consequently each ceph_osd_data/ceph_msg_data item) its own
pointer to a (list of) bio(s). The messenger then initializes its
cursor with cloned bio's ->bi_iter, so it knows where to start reading
from/writing to. That's all the cloned bios are used for: to determine
each object request's starting position in the provided data buffer.
Introduce ceph_bio_iter to do exactly that -- store position within bio
list (i.e. pointer to bio) + position within that bio (i.e. bvec_iter).
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
- make it void
- xlen (object extent length) out parameter should be u32 because only
a single stripe unit is mapped at a time
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
bl, stripeno and objsetno should be u64 -- otherwise large enough files
get corrupted. How large depends on file layout:
- 4M-objects layout (default): any file over 16P
- 64K-objects layout (smallest possible object size): any file over 512T
Only CephFS is affected, rbd doesn't use ceph_calc_file_object_mapping()
yet. Fortunately, CephFS has a max_file_size configurable, the default
for which is way below both of the above numbers.
Reimplement the logic from scratch with no layout validation -- it's
done on the MDS side.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Commit 21acdf45f4 ("rbd: set max_segments to USHRT_MAX") removed the
limit on max_segments. Remove the limit on max_segment_size as well.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Pull perf fixes from Ingo Molnar:
"Two fixlets"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/hwbp: Simplify the perf-hwbp code, fix documentation
perf/x86/intel: Fix linear IP of PEBS real_ip on Haswell and later CPUs
Pull x86 PTI fixes from Ingo Molnar:
"Two fixes: a relatively simple objtool fix that makes Clang built
kernels work with ORC debug info, plus an alternatives macro fix"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Fixup alternative_call_2
objtool: Add Clang support
- fix missed rebuild of TRIM_UNUSED_KSYMS
- fix rpm-pkg for GNU tar >= 1.29
- include scripts/dtc/include-prefixes/* to kernel header deb-pkg
- add -no-integrated-as option ealier to fix building with Clang
- fix netfilter Makefile for parallel building
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2WPN
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- fix missed rebuild of TRIM_UNUSED_KSYMS
- fix rpm-pkg for GNU tar >= 1.29
- include scripts/dtc/include-prefixes/* to kernel header deb-pkg
- add -no-integrated-as option ealier to fix building with Clang
- fix netfilter Makefile for parallel building
* tag 'kbuild-fixes-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
netfilter: nf_nat_snmp_basic: add correct dependency to Makefile
kbuild: rpm-pkg: Support GNU tar >= 1.29
builddeb: Fix header package regarding dtc source links
kbuild: set no-integrated-as before incl. arch Makefile
kbuild: make scripts/adjust_autoksyms.sh robust against timestamp races
Pull networking fixes from David Miller:
1) Fix RCU locking in xfrm_local_error(), from Taehee Yoo.
2) Fix return value assignments and thus error checking in
iwl_mvm_start_ap_ibss(), from Johannes Berg.
3) Don't count header length twice in vti4, from Stefano Brivio.
4) Fix deadlock in rt6_age_examine_exception, from Eric Dumazet.
5) Fix out-of-bounds access in nf_sk_lookup_slow{v4,v6}() from Subash
Abhinov.
6) Check nladdr size in netlink_connect(), from Alexander Potapenko.
7) VF representor SQ numbers are 32 not 16 bits, in mlx5 driver, from
Or Gerlitz.
8) Out of bounds read in skb_network_protocol(), from Eric Dumazet.
9) r8169 driver sets driver data pointer after register_netdev() which
is too late. Fix from Heiner Kallweit.
10) Fix memory leak in mlx4 driver, from Moshe Shemesh.
11) The multi-VLAN decap fix added a regression when dealing with device
that lack a MAC header, such as tun. Fix from Toshiaki Makita.
12) Fix integer overflow in dynamic interrupt coalescing code. From Tal
Gilboa.
13) Use after free in vrf code, from David Ahern.
14) IPV6 route leak between VRFs fix, also from David Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits)
net: mvneta: fix enable of all initialized RXQs
net/ipv6: Fix route leaking between VRFs
vrf: Fix use after free and double free in vrf_finish_output
ipv6: sr: fix seg6 encap performances with TSO enabled
net/dim: Fix int overflow
vlan: Fix vlan insertion for packets without ethernet header
net: Fix untag for vlan packets without ethernet header
atm: iphase: fix spelling mistake: "Receiverd" -> "Received"
vhost: validate log when IOTLB is enabled
qede: Do not drop rx-checksum invalidated packets.
hv_netvsc: enable multicast if necessary
ip_tunnel: Resolve ipsec merge conflict properly.
lan78xx: Crash in lan78xx_writ_reg (Workqueue: events lan78xx_deferred_multicast_write)
qede: Fix barrier usage after tx doorbell write.
vhost: correctly remove wait queue during poll failure
net/mlx4_core: Fix memory leak while delete slave's resources
net/mlx4_en: Fix mixed PFC and Global pause user control requests
net/smc: use announced length in sock_recvmsg()
llc: properly handle dev_queue_xmit() return value
strparser: Fix sign of err codes
...
In mvneta_port_up() we enable relevant RX and TX port queues by write
queues bit map to an appropriate register.
q_map must be ZERO in the beginning of this process.
Signed-off-by: Yelena Krivosheev <yelena@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Donald reported that IPv6 route leaking between VRFs is not working.
The root cause is the strict argument in the call to rt6_lookup when
validating the nexthop spec.
ip6_route_check_nh validates the gateway and device (if given) of a
route spec. It in turn could call rt6_lookup (e.g., lookup in a given
table did not succeed so it falls back to a full lookup) and if so
sets the strict argument to 1. That means if the egress device is given,
the route lookup needs to return a result with the same device. This
strict requirement does not work with VRFs (IPv4 or IPv6) because the
oif in the flow struct is overridden with the index of the VRF device
to trigger a match on the l3mdev rule and force the lookup to its table.
The right long term solution is to add an l3mdev index to the flow
struct such that the oif is not overridden. That solution will not
backport well, so this patch aims for a simpler solution to relax the
strict argument if the route spec device is an l3mdev slave. As done
in other places, use the FLOWI_FLAG_SKIP_NH_OIF to know that the
RT6_LOOKUP_F_IFACE flag needs to be removed.
Fixes: ca254490c8 ("net: Add VRF support to IPv6 stack")
Reported-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Miguel reported an skb use after free / double free in vrf_finish_output
when neigh_output returns an error. The vrf driver should return after
the call to neigh_output as it takes over the skb on error path as well.
Patch is a simplified version of Miguel's patch which was written for 4.9,
and updated to top of tree.
Fixes: 8f58336d3f ("net: Add ethernet header for pass through VRF device")
Signed-off-by: Miguel Fadon Perlines <mfadon@teldat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enabling TSO can lead to abysmal performances when using seg6 in
encap mode, such as with the ixgbe driver. This patch adds a call to
iptunnel_handle_offloads() to remove the encapsulation bit if needed.
Before:
root@comp4-seg6bpf:~# iperf3 -c fc00::55
Connecting to host fc00::55, port 5201
[ 4] local fc45::4 port 36592 connected to fc00::55 port 5201
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 4] 0.00-1.00 sec 196 KBytes 1.60 Mbits/sec 47 6.66 KBytes
[ 4] 1.00-2.00 sec 304 KBytes 2.49 Mbits/sec 100 5.33 KBytes
[ 4] 2.00-3.00 sec 284 KBytes 2.32 Mbits/sec 92 5.33 KBytes
After:
root@comp4-seg6bpf:~# iperf3 -c fc00::55
Connecting to host fc00::55, port 5201
[ 4] local fc45::4 port 43062 connected to fc00::55 port 5201
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 4] 0.00-1.00 sec 1.03 GBytes 8.89 Gbits/sec 0 743 KBytes
[ 4] 1.00-2.00 sec 1.03 GBytes 8.87 Gbits/sec 0 743 KBytes
[ 4] 2.00-3.00 sec 1.03 GBytes 8.87 Gbits/sec 0 743 KBytes
Reported-by: Tom Herbert <tom@quantonium.net>
Fixes: 6c8702c60b ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Signed-off-by: David Lebrun <dlebrun@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stable.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJavj1tAAoJEEp/3jgCEfOLE6EH/jjV2MM6cwZnWHc8yDdRcaYj
SaunEoSliNeKwCpNSFjNsjL6y5KdnymLBboLGkBOoy5BJCkAMFCaGJQPEW4uCY21
JBtT/PTykEO6c20bX8hcmrPpZguixd7U7oL077e/kQwjPBYHkZrnWWJfbJ6rtWxx
PUtJ5fxr4Iv9XrusEi/TkeNFYthc6ivqeEn7wzqzFuJDHLLGAoC9pqZWNwYnqMoF
klQ7Hk9dvoWwTM5OzD+x31nrVa8P/0tY0fYkhvpFoLrNLW70SGf1kVgltN5k1Ynp
MW3KQlRHNKZrkgQskXHgPDMWPAeQA9oNw7YJOaOMe4As264cHyf2idmMn7bjhfg=
=gA+z
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.16-rc8' of git://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A fix for a dio-enabled loop on ceph deadlock from Zheng, marked for
stable"
* tag 'ceph-for-4.16-rc8' of git://github.com/ceph/ceph-client:
ceph: only dirty ITER_IOVEC pages for direct read
PPC:
- Fix a bug causing occasional machine check exceptions on POWER8 hosts
(introduced in 4.16-rc1)
x86:
- Fix a guest crashing regression with nested VMX and restricted guest
(introduced in 4.16-rc1)
- Fix dependency check for pv tlb flush (The wrong dependency that
effectively disabled the feature was added in 4.16-rc4, the original
feature in 4.16-rc1, so it got decent testing.)
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJavUt5AAoJEED/6hsPKofo8uQH/RuijrsAIUnymkYY+6BYFXlh
Ri8qhG8VB+C3SpWEtsqcqNVkjJTepCD2Ej5BJTL4Gc9BSTWy7Ht6kqskEgwcnzu2
xRfkg0q0vTj1+GDd+UiTZfxiinoHtB9x3fiXali5UNTCd1fweLxdidETfO+GqMMq
KDhTR+S8dXE5VG7r+iJ80LZPtHQJ94f0fh9XpQk3X2ExTG5RBxag1U2nCfiKRAZk
xRv1CNAxNaBxS38CgYfHzg31NJx38fnq/qREsIdOx0Ju9WQkglBFkhLAGUb4vL0I
nn8YX/oV9cW2G8tyPWjC245AouABOLbzu0xyj5KgCY/z1leA9tdLFX/ET6Zye+E=
=++uZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"PPC:
- Fix a bug causing occasional machine check exceptions on POWER8
hosts (introduced in 4.16-rc1)
x86:
- Fix a guest crashing regression with nested VMX and restricted
guest (introduced in 4.16-rc1)
- Fix dependency check for pv tlb flush (the wrong dependency that
effectively disabled the feature was added in 4.16-rc4, the
original feature in 4.16-rc1, so it got decent testing)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix pv tlb flush dependencies
KVM: nVMX: sync vmcs02 segment regs prior to vmx_set_cr0
KVM: PPC: Book3S HV: Fix duplication of host SLB entries
Pull i2c fix from Wolfram Sang:
"A simple but worthwhile I2C driver fix for 4.16"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: i2c-stm32f7: fix no check on returned setup
Very small fixes (all one-liners) at this time.
One fix is for a PCM core stuff to correct the mmap behavior on
non-x86. It doesn't show on most machines but mostly only for
exotic non-interleaved formats.
-----BEGIN PGP SIGNATURE-----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=tUOp
-----END PGP SIGNATURE-----
Merge tag 'sound-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Very small fixes (all one-liners) at this time.
One fix is for a PCM core stuff to correct the mmap behavior on
non-x86. It doesn't show on most machines but mostly only for exotic
non-interleaved formats"
* tag 'sound-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: pcm: potential uninitialized return values
ALSA: pcm: Use dma_bytes as size parameter in dma_mmap_coherent()
ALSA: usb-audio: Add native DSD support for TEAC UD-301
When calculating difference between samples, the values
are multiplied by 100. Large values may cause int overflow
when multiplied (usually on first iteration).
Fixed by forcing 100 to be of type unsigned long.
Fixes: 4c4dbb4a73 ("net/mlx5e: Move dynamic interrupt coalescing code to include/linux")
Signed-off-by: Tal Gilboa <talgi@mellanox.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Toshiaki Makita says:
====================
Fix vlan tag handling for vlan packets without ethernet headers
Eric Dumazet reported syzbot found a new bug which leads to underflow of
size argument of memmove(), causing crash[1]. This can be triggered by tun
devices.
The underflow happened because skb_vlan_untag() did not expect vlan packets
without ethernet headers, and tun can produce such packets.
I also checked vlan_insert_inner_tag() and found a similar bug.
This series fixes these problems.
[1] https://marc.info/?l=linux-netdev&m=152221753920510&w=2
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In some situation vlan packets do not have ethernet headers. One example
is packets from tun devices. Users can specify vlan protocol in tun_pi
field instead of IP protocol. When we have a vlan device with reorder_hdr
disabled on top of the tun device, such packets from tun devices are
untagged in skb_vlan_untag() and vlan headers will be inserted back in
vlan_insert_inner_tag().
vlan_insert_inner_tag() however did not expect packets without ethernet
headers, so in such a case size argument for memmove() underflowed.
We don't need to copy headers for packets which do not have preceding
headers of vlan headers, so skip memmove() in that case.
Also don't write vlan protocol in skb->data when it does not have enough
room for it.
Fixes: cbe7128c4b ("vlan: Fix out of order vlan headers with reorder header off")
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
