mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 14:43:58 +08:00
4bd7b5127b
37935 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Sergei Shtylyov
|
4bd7b5127b |
micrel: add support for KSZ8041RNLI
Renesas R-Car development boards use KSZ8041RNLI PHY which for some reason has ID of 0x00221537 that is not documented for KSZ8041-family PHYs and does not match the documented ID of 0x0022151x (where 'x' is the revision). We have to add the new #define PHY_ID_* and new ksphy_driver[] entry, almost the same as KSZ8041 one, differing only in the 'phy_id' and 'name' fields. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Sasha Levin
|
12663bfc97 |
net: unix: allow set_peek_off to fail
unix_dgram_recvmsg() will hold the readlock of the socket until recv is complete. In the same time, we may try to setsockopt(SO_PEEK_OFF) which will hang until unix_dgram_recvmsg() will complete (which can take a while) without allowing us to break out of it, triggering a hung task spew. Instead, allow set_peek_off to fail, this way userspace will not hang. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Paul Durrant
|
1431fb31ec |
xen-netback: fix fragment detection in checksum setup
The code to detect fragments in checksum_setup() was missing for IPv4 and too eager for IPv6. (It transpires that Windows seems to send IPv6 packets with a fragment header even if they are not a fragment - i.e. offset is zero, and M bit is not set). This patch also incorporates a fix to callers of maybe_pull_tail() where skb->network_header was being erroneously added to the length argument. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> cc: David Miller <davem@davemloft.net> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
David S. Miller
|
7ce5a27f2e |
Revert "net: Handle CHECKSUM_COMPLETE more adequately in pskb_trim_rcsum()."
This reverts commit
|
||
Rafael J. Wysocki
|
8496e85c20 |
PCI / tg3: Give up chip reset and carrier loss handling if PCI device is not present
Modify tg3_chip_reset() and tg3_close() to check if the PCI network adapter device is accessible at all in order to skip poking it or trying to handle a carrier loss in vain when that's not the case. Introduce a special PCI helper function pci_device_is_present() for this purpose. Of course, this uncovers the lack of the appropriate RTNL locking in tg3_suspend() and tg3_resume(), so add that locking in there too. These changes prevent tg3 from burning a CPU at 100% load level for solid several seconds after the Thunderbolt link is disconnected from a Matrox DS1 docking station. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Linus Torvalds
|
a45299e727 |
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner: - Correction of fuzzy and fragile IRQ_RETVAL macro - IRQ related resume fix affecting only XEN - ARM/GIC fix for chained GIC controllers * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: Gic: fix boot for chained gics irq: Enable all irqs unconditionally in irq_resume genirq: Correct fuzzy and fragile IRQ_RETVAL() definition |
||
|
Linus Torvalds
|
a0b57ca33e |
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar: "Various smaller fixlets, all over the place" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/doc: Fix generation of device-drivers sched: Expose preempt_schedule_irq() sched: Fix a trivial typo in comments sched: Remove unused variable in 'struct sched_domain' sched: Avoid NULL dereference on sd_busy sched: Check sched_domain before computing group power MAINTAINERS: Update file patterns in the lockdep and scheduler entries |
||
|
Linus Torvalds
|
e321ae4c20 |
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar: "Misc kernel and tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools lib traceevent: Fix conversion of pointer to integer of different size perf/trace: Properly use u64 to hold event_id perf: Remove fragile swevent hlist optimization ftrace, perf: Avoid infinite event generation loop tools lib traceevent: Fix use of multiple options in processing field perf header: Fix possible memory leaks in process_group_desc() perf header: Fix bogus group name perf tools: Tag thread comm as overriden |
||
|
Linus Torvalds
|
dda9cc3a14 |
GPIO fixes for the v3.13 series:
- A big slew of documentation for the gpiod transition that
happened in the merge window, no semantic effect, but we should
provide proper documentation with the new API.
- Fix flags related to the new API.
- Fix to the find_chip_by_name() lookup function related to the
new API.
- Fix of_find_gpio() when not using device tree.
- Bug fix for the TB10x direction setting.
- Error path fixes from Dan Carpenter.
- Nasty IRQdomain bug relating to taking an unitialized spinlock.
- Minor fixes here and there.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=GmyD
-----END PGP SIGNATURE-----
Merge tag 'gpio-v3.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Here us a bunch of patches for the v3.13 series. Most important stuff
is related to fixes and documentation for the new GPIO descriptor API.
If the diffstat is scary you'll notice most of it is to
Documentation/*:
- A big slew of documentation for the gpiod transition that happened
in the merge window, no semantic effect, but we should provide
proper documentation with the new API.
- Fix flags related to the new API.
- Fix to the find_chip_by_name() lookup function related to the new
API.
- Fix of_find_gpio() when not using device tree.
- Bug fix for the TB10x direction setting.
- Error path fixes from Dan Carpenter.
- Nasty IRQdomain bug relating to taking an unitialized spinlock.
- Minor fixes here and there"
* tag 'gpio-v3.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: bcm281xx: Fix return value of bcm_kona_gpio_get()
gpio: pl061: move irqdomain initialization
gpio: ucb1400: Add MODULE_ALIAS
gpiolib: fix of_find_gpio() when OF not defined
gpio: fix memory leak in error path
gpio: rcar: NULL dereference on error in probe()
gpio: msm: make msm_gpio.summary_irq signed for error handling
gpio: mvebu: make mvchip->irqbase signed for error handling
gpiolib: use dedicated flags for GPIO properties
gpiolib: fix find_chip_by_name()
Documentation: gpiolib: document new interface
gpio: tb10x: Set output value before setting direction to output
|
||
|
Linus Torvalds
|
0b0f7f1cda |
Staging fixes for 3.13-rc2
Here are a number of staging, and IIO driver, fixes for 3.13-rc2 that resolve issues that have been reported for 3.13-rc1. All of these have been in linux-next for a bit this week. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEYEABECAAYFAlKWdiEACgkQMUfUDdst+ynbywCfaED1OKlzXXx/VbCd5WRlYd2a 2IEAoJ4c6LmgW9Vn6z0M/pRblvmPyYj1 =Tq5a -----END PGP SIGNATURE----- Merge tag 'staging-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg KH: "Here are a number of staging, and IIO driver, fixes for 3.13-rc2 that resolve issues that have been reported for 3.13-rc1. All of these have been in linux-next for a bit this week" * tag 'staging-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (25 commits) Staging: tidspbridge: disable driver staging: zsmalloc: Ensure handle is never 0 on success staging/lustre/ptlrpc: fix ptlrpc_stop_pinger logic staging: r8188eu: Fix AP mode Staging: btmtk_usb: Add hdev parameter to hdev->send driver callback Staging: go7007: fix up some remaining go->dev issues staging: imx-drm: Fix modular build of DRM_IMX_IPUV3 staging: ft1000: fix use of potentially uninitialized variable Revert "staging:media: Use dev_dbg() instead of pr_debug()" Staging: zram: Fix memory leak by refcount mismatch staging: vt6656: [BUG] Fix for TX USB resets from vendors driver. staging: nvec: potential NULL dereference on error path Staging: vt6655-6: potential NULL dereference in hostap_disable_hostapd() staging: comedi: s626: fix value written by s626_set_dac() Staging: comedi: pcl730: fix some bitwise vs logical AND bugs staging: comedi: fix potentially uninitialised variable iio:accel:kxsd9 fix missing mutex unlock iio: adc: ti_am335x_adc: avoid double free of buffer. staging:iio: Fix hmc5843 Kconfig dependencies iio: Fix tcs3472 Kconfig dependencies ... |
||
|
Linus Torvalds
|
0e4b0743bb |
ARM: SoC fixes for 3.13-rc
Mostly bugfixes and a few small code removals. Worth pointing out is:
- A handful of more fixes to get DT enablement working properly on OMAP,
finding new breakage of things that don't work quite right yet without
the traditional board files. I expect a bit more of this to come in this
release as people test on their hardware.
- Implementation of power_down_finish() on vexpress, to make kexec work and
to stop the MCPM core to produce a warning (the warning was new to 3.13-rc1).
- A handful of minor fixes for various platforms.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJSlPDhAAoJEIwa5zzehBx31dkP/RyP/esMHSBO5k36eB5V35HP
/XcexbgnnH4tDVIKl28qH4/AjkT+09uNZ/QQpbshwmEHw1X5i+Dz455suBCdP0T7
D+dHy/YCMDuMD7ow0OXWyyL9XbILV5VuBUogrdMN/RhzW2gIvIJRuHztKBQcU8sw
L94OIPjlKX/YFrswuy0LXiIZt2Y2k3zFVFCwcxIpTB4F1avYj7luZjSX6y469TEB
JyqfO+hooU/qtuc1pKTnBzKxVI7IVae3bberDhZCCKsAxP1/c5rSMy+nf60rqB4O
nkT09sAr1SBVp6kB4Ql2yHGiZ5ozxSJbMQpx1v73wnS09wL9RXwR1GZPrNcDW90l
qwergTrBxhYdzWyNAf/87DmQhB+Xf7kGqtUuRHleuuFhBOU29qR8oXQ6WMRkzHn9
ZTSRZ99l5a3Aul8w+sEWzOKDdZfhycMsBNzWH8xpzR1fgH4N9GRJlSlqkWdrVGca
QBNiC5bmtPpMgAHSkqK0Zu3rog83NX9NxcXG15FVEah7J4Q/VT/x51AIh0uSRBf0
35lY86R79SQ3FYYyHhl2pyAw8nhY2EmofGSG2WJ+qfZ9TgDSDFdwA0hz2fp9nwFc
Lwb3zGUEyGwgJ4I/n/cDGBfY2CsJuTEcDtB4sW1Vw4GrzMQvc43SWly6e5+RSAgq
reP23wcD4/YKev7//zzI
=zdhe
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Mostly bugfixes and a few small code removals. Worth pointing out is:
- A handful of more fixes to get DT enablement working properly on
OMAP, finding new breakage of things that don't work quite right
yet without the traditional board files. I expect a bit more of
this to come in this release as people test on their hardware.
- Implementation of power_down_finish() on vexpress, to make kexec
work and to stop the MCPM core to produce a warning (the warning
was new to 3.13-rc1).
- A handful of minor fixes for various platforms"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: bcm2835: add missing #xxx-cells to I2C nodes
ARM: dts: Add max77686 RTC interrupt to cros5250-common
ARM: vexpress/TC2: Implement MCPM power_down_finish()
ARM: tegra: Provide dummy powergate implementation
ARM: omap: fix warning with LPAE build
ARM: OMAP2+: Remove legacy omap4_twl6030_hsmmc_init
ARM: OMAP2+: Remove legacy mux code for display.c
ARM: OMAP2+: Fix undefined reference to set_cntfreq
gpio: twl4030: Fix passing of pdata in the device tree case
gpio: twl4030: Fix regression for twl gpio output
ARM: OMAP2+: More randconfig fixes for reconfigure_io_chain
ARM: dts: imx6qdl: disable spdif "rxtx5" clock option
ARM: dts: Fix omap2 specific dtsi files by adding the missing entries
ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x
i2c: omap: Fix missing device tree flags for omap2
|
||
Thierry Reding
|
9886e1fd09 |
ARM: tegra: Provide dummy powergate implementation
In order to support increased build test coverage for drivers, implement dummies for the powergate implementation. This will allow the drivers to be built without requiring support for Tegra to be selected. This patch solves the following build errors, which can be triggered in v3.13-rc1 by selecting DRM_TEGRA without ARCH_TEGRA: drivers/built-in.o: In function `gr3d_remove': drivers/gpu/drm/tegra/gr3d.c:321: undefined reference to `tegra_powergate_power_off' drivers/gpu/drm/tegra/gr3d.c:325: undefined reference to `tegra_powergate_power_off' drivers/built-in.o: In function `gr3d_probe': drivers/gpu/drm/tegra/gr3d.c:266: undefined reference to `tegra_powergate_sequence_power_up' drivers/gpu/drm/tegra/gr3d.c:273: undefined reference to `tegra_powergate_sequence_power_up' Signed-off-by: Thierry Reding <treding@nvidia.com> [swarren, updated commit description] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net> |
||
Greg Kroah-Hartman
|
1676587bca |
First round of fixes for IIO in the 3.13 cycle.
The usual mixed bag of fixes. * 3 cases where kconfig dependencies were missing. We need to keep a closer eye on this in new drivers. * hid_sensors was abusing the iio_dev->trigger pointer. We had a round of clearing this out some time ago but this driver clearly slipped through. * A misuse of the IIO_ST macro, in mcp3422, which we should really make a concertive effort to finish removing. * Avoid a double free introduced by recent buffer reference counting in the one driver that (quite reasonably!) does things differently (am335x) * A missing mutex_unlock in kxsd9 that means that driver has been non functional for some time and no one noticed (including me who for once actually has one of the supported devices). * An incorrect assumption about the parameters of sign_extend32 in mcp3422. So nothing controversial. The only substantial patch is the hid_sensors one and that is actually just adding a new pointer to the devices private state then moving the code over to it. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABAgAGBQJSk7SvAAoJEFSFNJnE9BaIRNsQAJnM/WiH1ghfA5nuc0V7JrnB 2Z6Qtm3Stoq4Ul5LYiEMxumo6ckL17YFddxejUF9X4Eq5N8YyAxdPd8JdDJgS2OL yCM2x6izd9drIGA3YUMMOvZ1BScSK1e5DmXJHp4nuF68uHtf2TM4TGF/2zuqt3TN 2bL7blNF3/5O/TiBRB4XjkH4Sy5c4G2kke+0SckRnWohTn8oE7tWihr84nYPciqt mu11Nrv9S+sr/5GzRwN8d5SU33yU2/ML32QU/4oQzb/XxBW0W759NJflqY5sSZ89 JQnHcCKKZD7IWBFT0VAMiuEjBpSRGc4vxBbYjsVHtEHzW7v3L0fvob5YqfSrzMlD rVUiTQJm7fC/4hn7iJUPrxkWsSGsjCvVrLZmZFOK3OYONUfd+Cqg0nliihRZo65s 054/yi4v8xd6OUzqSxtWKIK/ZQjDxa5W2BlRoryShCrUAo/e3Djy+jH32v4Mmgfe D9aEwdUqa8kPlq6pyQC2QRgWWU1K5+RRrzW5nNNLlmjYtVlfF+8OgcQYGHW8iMur 8AaDXNZwQLEYA4409T/Ar9lNg4gDqc0YZsvNibu0q4Kxfp13dJOwra+xmF+ktECr KcIFxu5v89SgpE1Rra74OXYFWQ1I4Qy+sJxhQKymthPzmw4nuUidK33mxjtcojwz TvQJu8f3us8Ea5vQLZo0 =cIMc -----END PGP SIGNATURE----- Merge tag 'fixes-for-3.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First round of fixes for IIO in the 3.13 cycle. The usual mixed bag of fixes. * 3 cases where kconfig dependencies were missing. We need to keep a closer eye on this in new drivers. * hid_sensors was abusing the iio_dev->trigger pointer. We had a round of clearing this out some time ago but this driver clearly slipped through. * A misuse of the IIO_ST macro, in mcp3422, which we should really make a concertive effort to finish removing. * Avoid a double free introduced by recent buffer reference counting in the one driver that (quite reasonably!) does things differently (am335x) * A missing mutex_unlock in kxsd9 that means that driver has been non functional for some time and no one noticed (including me who for once actually has one of the supported devices). * An incorrect assumption about the parameters of sign_extend32 in mcp3422. So nothing controversial. The only substantial patch is the hid_sensors one and that is actually just adding a new pointer to the devices private state then moving the code over to it. |
||
Alexandre Courbot
|
53e7cac35d |
gpiolib: use dedicated flags for GPIO properties
GPIO mapping properties were defined using the GPIOF_* flags, which are declared in linux/gpio.h. This file is not included when using the GPIO descriptor interface. This patch declares the flags that can be used as GPIO mappings properties in linux/gpio/driver.h, and uses them in gpiolib, so that no deprecated declarations are used by the GPIO descriptor interface. This patch also allows GPIO_OPEN_DRAIN and GPIO_OPEN_SOURCE to be specified as GPIO mapping properties. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
Randy Dunlap
|
7e3528c366 |
slab.h: remove duplicate kmalloc declaration and fix kernel-doc warnings
Fix kernel-doc warning for duplicate definition of 'kmalloc': Documentation/DocBook/kernel-api.xml:9483: element refentry: validity error : ID API-kmalloc already defined <refentry id="API-kmalloc"> Also combine the kernel-doc info from the 2 kmalloc definitions into one block and remove the "see kcalloc" comment since kmalloc now contains the @flags info. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
26b265cd29 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu: - Made x86 ablk_helper generic for ARM - Phase out chainiv in favour of eseqiv (affects IPsec) - Fixed aes-cbc IV corruption on s390 - Added constant-time crypto_memneq which replaces memcmp - Fixed aes-ctr in omap-aes - Added OMAP3 ROM RNG support - Add PRNG support for MSM SoC's - Add and use Job Ring API in caam - Misc fixes [ NOTE! This pull request was sent within the merge window, but Herbert has some questionable email sending setup that makes him public enemy #1 as far as gmail is concerned. So most of his emails seem to be trapped by gmail as spam, resulting in me not seeing them. - Linus ] * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (49 commits) crypto: s390 - Fix aes-cbc IV corruption crypto: omap-aes - Fix CTR mode counter length crypto: omap-sham - Add missing modalias padata: make the sequence counter an atomic_t crypto: caam - Modify the interface layers to use JR API's crypto: caam - Add API's to allocate/free Job Rings crypto: caam - Add Platform driver for Job Ring hwrng: msm - Add PRNG support for MSM SoC's ARM: DT: msm: Add Qualcomm's PRNG driver binding document crypto: skcipher - Use eseqiv even on UP machines crypto: talitos - Simplify key parsing crypto: picoxcell - Simplify and harden key parsing crypto: ixp4xx - Simplify and harden key parsing crypto: authencesn - Simplify key parsing crypto: authenc - Export key parsing helper function crypto: mv_cesa: remove deprecated IRQF_DISABLED hwrng: OMAP3 ROM Random Number Generator support crypto: sha256_ssse3 - also test for BMI2 crypto: mv_cesa - Remove redundant of_match_ptr crypto: sahara - Remove redundant of_match_ptr ... |
||
|
Linus Torvalds
|
e3414786ff |
PCI updates for v3.13:
Miscellaneous
- Remove duplicate disable from pcie_portdrv_remove() (Yinghai Lu)
- Fix whitespace, capitalization, and spelling errors (Bjorn Helgaas)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=C9v7
-----END PGP SIGNATURE-----
Merge tag 'pci-v3.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Miscellaneous
- Remove duplicate disable from pcie_portdrv_remove() (Yinghai Lu)
- Fix whitespace, capitalization, and spelling errors (Bjorn Helgaas)"
* tag 'pci-v3.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Remove duplicate pci_disable_device() from pcie_portdrv_remove()
PCI: Fix whitespace, capitalization, and spelling errors
|
||
|
Linus Torvalds
|
d2c2ad54c4 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix memory leaks and other issues in mwifiex driver, from Amitkumar
Karwar.
2) skb_segment() can choke on packets using frag lists, fix from
Herbert Xu with help from Eric Dumazet and others.
3) IPv4 output cached route instantiation properly handles races
involving two threads trying to install the same route, but we
forgot to propagate this logic to input routes as well. Fix from
Alexei Starovoitov.
4) Put protections in place to make sure that recvmsg() paths never
accidently copy uninitialized memory back into userspace and also
make sure that we never try to use more that sockaddr_storage for
building the on-kernel-stack copy of a sockaddr. Fixes from Hannes
Frederic Sowa.
5) R8152 driver transmit flow bug fixes from Hayes Wang.
6) Fix some minor fallouts from genetlink changes, from Johannes Berg
and Michael Opdenacker.
7) AF_PACKET sendmsg path can race with netdevice unregister notifier,
fix by using RCU to make sure the network device doesn't go away
from under us. Fix from Daniel Borkmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
gso: handle new frag_list of frags GRO packets
genetlink: fix genl_set_err() group ID
genetlink: fix genlmsg_multicast() bug
packet: fix use after free race in send path when dev is released
xen-netback: stop the VIF thread before unbinding IRQs
wimax: remove dead code
net/phy: Add the autocross feature for forced links on VSC82x4
net/phy: Add VSC8662 support
net/phy: Add VSC8574 support
net/phy: Add VSC8234 support
net: add BUG_ON if kernel advertises msg_namelen > sizeof(struct sockaddr_storage)
net: rework recvmsg handler msg_name and msg_namelen logic
bridge: flush br's address entry in fdb when remove the
net: core: Always propagate flag changes to interfaces
ipv4: fix race in concurrent ip_route_input_slow()
r8152: fix incorrect type in assignment
r8152: support stopping/waking tx queue
r8152: modify the tx flow
r8152: fix tx/rx memory overflow
netfilter: ebt_ip6: fix source and destination matching
...
|
||
|
Linus Torvalds
|
24f971abbd |
Merge branch 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux
Pull SLAB changes from Pekka Enberg:
"The patches from Joonsoo Kim switch mm/slab.c to use 'struct page' for
slab internals similar to mm/slub.c. This reduces memory usage and
improves performance:
https://lkml.org/lkml/2013/10/16/155
Rest of the changes are bug fixes from various people"
* 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux: (21 commits)
mm, slub: fix the typo in mm/slub.c
mm, slub: fix the typo in include/linux/slub_def.h
slub: Handle NULL parameter in kmem_cache_flags
slab: replace non-existing 'struct freelist *' with 'void *'
slab: fix to calm down kmemleak warning
slub: proper kmemleak tracking if CONFIG_SLUB_DEBUG disabled
slab: rename slab_bufctl to slab_freelist
slab: remove useless statement for checking pfmemalloc
slab: use struct page for slab management
slab: replace free and inuse in struct slab with newly introduced active
slab: remove SLAB_LIMIT
slab: remove kmem_bufctl_t
slab: change the management method of free objects of the slab
slab: use __GFP_COMP flag for allocating slab pages
slab: use well-defined macro, virt_to_slab()
slab: overloading the RCU head over the LRU for RCU free
slab: remove cachep in struct slab_rcu
slab: remove nodeid in struct slab
slab: remove colouroff in struct slab
slab: change return type of kmem_getpages() to struct page
...
|
||
|
Linus Torvalds
|
a5d6e63323 |
Merge branch 'akpm' (fixes from Andrew)
Merge patches from Andrew Morton: "13 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: place page->pmd_huge_pte to right union MAINTAINERS: add keyboard driver to Hyper-V file list x86, mm: do not leak page->ptl for pmd page tables ipc,shm: correct error return value in shmctl (SHM_UNLOCK) mm, mempolicy: silence gcc warning block/partitions/efi.c: fix bound check ARM: drivers/rtc/rtc-at91rm9200.c: disable interrupts at shutdown mm: hugetlbfs: fix hugetlbfs optimization kernel: remove CONFIG_USE_GENERIC_SMP_HELPERS cleanly ipc,shm: fix shm_file deletion races mm: thp: give transparent hugepage code a separate copy_page checkpatch: fix "Use of uninitialized value" warnings configfs: fix race between dentry put and lookup |
||
|
Linus Torvalds
|
78dc53c422 |
Merge branch 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
"In this patchset, we finally get an SELinux update, with Paul Moore
taking over as maintainer of that code.
Also a significant update for the Keys subsystem, as well as
maintenance updates to Smack, IMA, TPM, and Apparmor"
and since I wanted to know more about the updates to key handling,
here's the explanation from David Howells on that:
"Okay. There are a number of separate bits. I'll go over the big bits
and the odd important other bit, most of the smaller bits are just
fixes and cleanups. If you want the small bits accounting for, I can
do that too.
(1) Keyring capacity expansion.
KEYS: Consolidate the concept of an 'index key' for key access
KEYS: Introduce a search context structure
KEYS: Search for auth-key by name rather than target key ID
Add a generic associative array implementation.
KEYS: Expand the capacity of a keyring
Several of the patches are providing an expansion of the capacity of a
keyring. Currently, the maximum size of a keyring payload is one page.
Subtract a small header and then divide up into pointers, that only gives
you ~500 pointers on an x86_64 box. However, since the NFS idmapper uses
a keyring to store ID mapping data, that has proven to be insufficient to
the cause.
Whatever data structure I use to handle the keyring payload, it can only
store pointers to keys, not the keys themselves because several keyrings
may point to a single key. This precludes inserting, say, and rb_node
struct into the key struct for this purpose.
I could make an rbtree of records such that each record has an rb_node
and a key pointer, but that would use four words of space per key stored
in the keyring. It would, however, be able to use much existing code.
I selected instead a non-rebalancing radix-tree type approach as that
could have a better space-used/key-pointer ratio. I could have used the
radix tree implementation that we already have and insert keys into it by
their serial numbers, but that means any sort of search must iterate over
the whole radix tree. Further, its nodes are a bit on the capacious side
for what I want - especially given that key serial numbers are randomly
allocated, thus leaving a lot of empty space in the tree.
So what I have is an associative array that internally is a radix-tree
with 16 pointers per node where the index key is constructed from the key
type pointer and the key description. This means that an exact lookup by
type+description is very fast as this tells us how to navigate directly to
the target key.
I made the data structure general in lib/assoc_array.c as far as it is
concerned, its index key is just a sequence of bits that leads to a
pointer. It's possible that someone else will be able to make use of it
also. FS-Cache might, for example.
(2) Mark keys as 'trusted' and keyrings as 'trusted only'.
KEYS: verify a certificate is signed by a 'trusted' key
KEYS: Make the system 'trusted' keyring viewable by userspace
KEYS: Add a 'trusted' flag and a 'trusted only' flag
KEYS: Separate the kernel signature checking keyring from module signing
These patches allow keys carrying asymmetric public keys to be marked as
being 'trusted' and allow keyrings to be marked as only permitting the
addition or linkage of trusted keys.
Keys loaded from hardware during kernel boot or compiled into the kernel
during build are marked as being trusted automatically. New keys can be
loaded at runtime with add_key(). They are checked against the system
keyring contents and if their signatures can be validated with keys that
are already marked trusted, then they are marked trusted also and can
thus be added into the master keyring.
Patches from Mimi Zohar make this usable with the IMA keyrings also.
(3) Remove the date checks on the key used to validate a module signature.
X.509: Remove certificate date checks
It's not reasonable to reject a signature just because the key that it was
generated with is no longer valid datewise - especially if the kernel
hasn't yet managed to set the system clock when the first module is
loaded - so just remove those checks.
(4) Make it simpler to deal with additional X.509 being loaded into the kernel.
KEYS: Load *.x509 files into kernel keyring
KEYS: Have make canonicalise the paths of the X.509 certs better to deduplicate
The builder of the kernel now just places files with the extension ".x509"
into the kernel source or build trees and they're concatenated by the
kernel build and stuffed into the appropriate section.
(5) Add support for userspace kerberos to use keyrings.
KEYS: Add per-user_namespace registers for persistent per-UID kerberos caches
KEYS: Implement a big key type that can save to tmpfs
Fedora went to, by default, storing kerberos tickets and tokens in tmpfs.
We looked at storing it in keyrings instead as that confers certain
advantages such as tickets being automatically deleted after a certain
amount of time and the ability for the kernel to get at these tokens more
easily.
To make this work, two things were needed:
(a) A way for the tickets to persist beyond the lifetime of all a user's
sessions so that cron-driven processes can still use them.
The problem is that a user's session keyrings are deleted when the
session that spawned them logs out and the user's user keyring is
deleted when the UID is deleted (typically when the last log out
happens), so neither of these places is suitable.
I've added a system keyring into which a 'persistent' keyring is
created for each UID on request. Each time a user requests their
persistent keyring, the expiry time on it is set anew. If the user
doesn't ask for it for, say, three days, the keyring is automatically
expired and garbage collected using the existing gc. All the kerberos
tokens it held are then also gc'd.
(b) A key type that can hold really big tickets (up to 1MB in size).
The problem is that Active Directory can return huge tickets with lots
of auxiliary data attached. We don't, however, want to eat up huge
tracts of unswappable kernel space for this, so if the ticket is
greater than a certain size, we create a swappable shmem file and dump
the contents in there and just live with the fact we then have an
inode and a dentry overhead. If the ticket is smaller than that, we
slap it in a kmalloc()'d buffer"
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (121 commits)
KEYS: Fix keyring content gc scanner
KEYS: Fix error handling in big_key instantiation
KEYS: Fix UID check in keyctl_get_persistent()
KEYS: The RSA public key algorithm needs to select MPILIB
ima: define '_ima' as a builtin 'trusted' keyring
ima: extend the measurement list to include the file signature
kernel/system_certificate.S: use real contents instead of macro GLOBAL()
KEYS: fix error return code in big_key_instantiate()
KEYS: Fix keyring quota misaccounting on key replacement and unlink
KEYS: Fix a race between negating a key and reading the error set
KEYS: Make BIG_KEYS boolean
apparmor: remove the "task" arg from may_change_ptraced_domain()
apparmor: remove parent task info from audit logging
apparmor: remove tsk field from the apparmor_audit_struct
apparmor: fix capability to not use the current task, during reporting
Smack: Ptrace access check mode
ima: provide hash algo info in the xattr
ima: enable support for larger default filedata hash algorithms
ima: define kernel parameter 'ima_template=' to change configured default
ima: add Kconfig default measurement list template
...
|
||
|
Linus Torvalds
|
3eaded86ac |
Merge git://git.infradead.org/users/eparis/audit
Pull audit updates from Eric Paris: "Nothing amazing. Formatting, small bug fixes, couple of fixes where we didn't get records due to some old VFS changes, and a change to how we collect execve info..." Fixed conflict in fs/exec.c as per Eric and linux-next. * git://git.infradead.org/users/eparis/audit: (28 commits) audit: fix type of sessionid in audit_set_loginuid() audit: call audit_bprm() only once to add AUDIT_EXECVE information audit: move audit_aux_data_execve contents into audit_context union audit: remove unused envc member of audit_aux_data_execve audit: Kill the unused struct audit_aux_data_capset audit: do not reject all AUDIT_INODE filter types audit: suppress stock memalloc failure warnings since already managed audit: log the audit_names record type audit: add child record before the create to handle case where create fails audit: use given values in tty_audit enable api audit: use nlmsg_len() to get message payload length audit: use memset instead of trying to initialize field by field audit: fix info leak in AUDIT_GET requests audit: update AUDIT_INODE filter rule to comparator function audit: audit feature to set loginuid immutable audit: audit feature to only allow unsetting the loginuid audit: allow unsetting the loginuid (with priv) audit: remove CONFIG_AUDIT_LOGINUID_IMMUTABLE audit: loginuid functions coding style selinux: apply selinux checks on new audit message types ... |
||
Kirill A. Shutemov
|
7aa555bf26 |
mm: place page->pmd_huge_pte to right union
I don't know what went wrong, mis-merge or something, but ->pmd_huge_pte
placed in wrong union within struct page.
In original patch[1] it's placed to union with ->lru and ->slab, but in
commit
|
||
Andrea Arcangeli
|
27c73ae759 |
mm: hugetlbfs: fix hugetlbfs optimization
Commit
|
||
Dave Hansen
|
30b0a105d9 |
mm: thp: give transparent hugepage code a separate copy_page
Right now, the migration code in migrate_page_copy() uses copy_huge_page()
for hugetlbfs and thp pages:
if (PageHuge(page) || PageTransHuge(page))
copy_huge_page(newpage, page);
So, yay for code reuse. But:
void copy_huge_page(struct page *dst, struct page *src)
{
struct hstate *h = page_hstate(src);
and a non-hugetlbfs page has no page_hstate(). This works 99% of the
time because page_hstate() determines the hstate from the page order
alone. Since the page order of a THP page matches the default hugetlbfs
page order, it works.
But, if you change the default huge page size on the boot command-line
(say default_hugepagesz=1G), then we might not even *have* a 2MB hstate
so page_hstate() returns null and copy_huge_page() oopses pretty fast
since copy_huge_page() dereferences the hstate:
void copy_huge_page(struct page *dst, struct page *src)
{
struct hstate *h = page_hstate(src);
if (unlikely(pages_per_huge_page(h) > MAX_ORDER_NR_PAGES)) {
...
Mel noticed that the migration code is really the only user of these
functions. This moves all the copy code over to migrate.c and makes
copy_huge_page() work for THP by checking for it explicitly.
I believe the bug was introduced in commit
|
||
Madalin Bucur
|
3fb69bcadd |
net/phy: Add the autocross feature for forced links on VSC82x4
Add auto-MDI/MDI-X capability for forced (autonegotiation disabled) 10/100 Mbps speeds on Vitesse VSC82x4 PHYs. Exported previously static function genphy_setup_forced() required by the new config_aneg handler in the Vitesse PHY module. Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> Signed-off-by: Shruti Kanetkar <Shruti@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Hannes Frederic Sowa
|
f3d3342602 |
net: rework recvmsg handler msg_name and msg_namelen logic
This patch now always passes msg->msg_namelen as 0. recvmsg handlers must set msg_namelen to the proper size <= sizeof(struct sockaddr_storage) to return msg_name to the user. This prevents numerous uninitialized memory leaks we had in the recvmsg handlers and makes it harder for new code to accidentally leak uninitialized memory. Optimize for the case recvfrom is called with NULL as address. We don't need to copy the address at all, so set it to NULL before invoking the recvmsg handler. We can do so, because all the recvmsg handlers must cope with the case a plain read() is called on them. read() also sets msg_name to NULL. Also document these changes in include/linux/net.h as suggested by David Miller. Changes since RFC: Set msg->msg_name = NULL if user specified a NULL in msg_name but had a non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't affect sendto as it would bail out earlier while trying to copy-in the address. It also more naturally reflects the logic by the callers of verify_iovec. With this change in place I could remove " if (!uaddr || msg_sys->msg_namelen == 0) msg->msg_name = NULL ". This change does not alter the user visible error logic as we ignore msg_namelen as long as msg_name is NULL. Also remove two unnecessary curly brackets in ___sys_recvmsg and change comments to netdev style. Cc: David Miller <davem@davemloft.net> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Linus Torvalds
|
8b2e9b712f |
Revert "mm: create a separate slab for page->ptl allocation"
This reverts commit
|
||
|
Linus Torvalds
|
b5898cd057 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs bits and pieces from Al Viro: "Assorted bits that got missed in the first pull request + fixes for a couple of coredump regressions" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fold try_to_ascend() into the sole remaining caller dcache.c: get rid of pointless macros take read_seqbegin_or_lock() and friends to seqlock.h consolidate simple ->d_delete() instances gfs2: endianness misannotations dump_emit(): use __kernel_write(), not vfs_write() dump_align(): fix the dumb braino |
||
|
Linus Torvalds
|
82023bb7f7 |
More ACPI and power management updates for 3.13-rc1
- ACPI-based device hotplug fixes for issues introduced recently and a fix for an older error code path bug in the ACPI PCI host bridge driver. - Fix for recently broken OMAP cpufreq build from Viresh Kumar. - Fix for a recent hibernation regression related to s2disk. - Fix for a locking-related regression in the ACPI EC driver from Puneet Kumar. - System suspend error code path fix related to runtime PM and runtime PM documentation update from Ulf Hansson. - cpufreq's conservative governor fix from Xiaoguang Chen. - New processor IDs for intel_idle and turbostat and removal of an obsolete Kconfig option from Len Brown. - New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg. - Removal of several ACPI video DMI blacklist entries that are not necessary any more from Aaron Lu. - Rework of the ACPI companion representation in struct device and code cleanup related to that change from Rafael J Wysocki, Lan Tianyu and Jarkko Nikula. - Fixes for assigning names to ACPI-enumerated I2C and SPI devices from Jarkko Nikula. / -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iQIcBAABCAAGBQJSjLYNAAoJEILEb/54YlRxkEQP/1pmFWNwSsxLtTHd+PEs0Xbo QccqvjQrnw/c8GcmK4eZrz6/xyuepmmjy9kfRKj2ENZniy0NEsSFqkTdSO3vYlva 8HKWUj7MV3evhFERXAF6Tu0b4Enx4jOP7VMtmYxJo3qrSnKRUcUzc6DGv/ACsUT1 Nkj0Lhdsg053Z+YzIXrl50w0tCDEMhVmWlMHBtYgr+dMNVnkfPBGkqMblMkKCXT2 w/yHvauZlxQHtI+8bVqTuGgNN0CPzdlpFGiuUF+5mDf6dRX8zlSn56Ia+Wyw1k9X dQp4jYQOgPRo03rNKqQPDiPxUdc7T0RAHRvDB51Ncweuh5PfZGguQe71p6/LKY2W i6zblZ0f/vc13hTiMrP+qzKcwZvgPB5DH7SfnHr61JKV7GNFCdYAqoceS5hYMzR9 d2Fd+txgm763IHWewXfDS/G2cU492R5qr4jpmUIACBQKWDZcqmSRDwRj83t56Ltb jgFBMbg4vZxG7IARhind74xsALxdhsgmFjPmx+0qPWjYxcU8otQZpXbgGNI9iOuW pxIQv5WPQW0tTmwO4HSuVCOwDPLPz5R0jkev7SvSj3Ek3TeD7He4LmnK055CATiC puq+6dp1FISPOPJYk+0DI61qN/CB/qNwRp8LU3ctZwudPVhznIE9FFQ3iN1FdBg2 X8VDcT9t7VvVuxSBjgkj =QMp+ -----END PGP SIGNATURE----- Merge tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI and power management updates from Rafael Wysocki: - ACPI-based device hotplug fixes for issues introduced recently and a fix for an older error code path bug in the ACPI PCI host bridge driver - Fix for recently broken OMAP cpufreq build from Viresh Kumar - Fix for a recent hibernation regression related to s2disk - Fix for a locking-related regression in the ACPI EC driver from Puneet Kumar - System suspend error code path fix related to runtime PM and runtime PM documentation update from Ulf Hansson - cpufreq's conservative governor fix from Xiaoguang Chen - New processor IDs for intel_idle and turbostat and removal of an obsolete Kconfig option from Len Brown - New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg - Removal of several ACPI video DMI blacklist entries that are not necessary any more from Aaron Lu - Rework of the ACPI companion representation in struct device and code cleanup related to that change from Rafael J Wysocki, Lan Tianyu and Jarkko Nikula - Fixes for assigning names to ACPI-enumerated I2C and SPI devices from Jarkko Nikula * tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits) PCI / hotplug / ACPI: Drop unused acpiphp_debug declaration ACPI / scan: Set flags.match_driver in acpi_bus_scan_fixed() ACPI / PCI root: Clear driver_data before failing enumeration ACPI / hotplug: Fix PCI host bridge hot removal ACPI / hotplug: Fix acpi_bus_get_device() return value check cpufreq: governor: Remove fossil comment in the cpufreq_governor_dbs() ACPI / video: clean up DMI table for initial black screen problem ACPI / EC: Ensure lock is acquired before accessing ec struct members PM / Hibernate: Do not crash kernel in free_basic_memory_bitmaps() ACPI / AC: Remove struct acpi_device pointer from struct acpi_ac spi: Use stable dev_name for ACPI enumerated SPI slaves i2c: Use stable dev_name for ACPI enumerated I2C slaves ACPI: Provide acpi_dev_name accessor for struct acpi_device device name ACPI / bind: Use (put|get)_device() on ACPI device objects too ACPI: Eliminate the DEVICE_ACPI_HANDLE() macro ACPI / driver core: Store an ACPI device pointer in struct acpi_dev_node cpufreq: OMAP: Fix compilation error 'r & ret undeclared' PM / Runtime: Fix error path for prepare PM / Runtime: Update documentation around probe|remove|suspend cpufreq: conservative: set requested_freq to policy max when it is over policy max ... |
||
|
Linus Torvalds
|
e6d69a60b7 |
Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine changes from Vinod Koul:
"This brings for slave dmaengine:
- Change dma notification flag to DMA_COMPLETE from DMA_SUCCESS as
dmaengine can only transfer and not verify validaty of dma
transfers
- Bunch of fixes across drivers:
- cppi41 driver fixes from Daniel
- 8 channel freescale dma engine support and updated bindings from
Hongbo
- msx-dma fixes and cleanup by Markus
- DMAengine updates from Dan:
- Bartlomiej and Dan finalized a rework of the dma address unmap
implementation.
- In the course of testing 1/ a collection of enhancements to
dmatest fell out. Notably basic performance statistics, and
fixed / enhanced test control through new module parameters
'run', 'wait', 'noverify', and 'verbose'. Thanks to Andriy and
Linus [Walleij] for their review.
- Testing the raid related corner cases of 1/ triggered bugs in
the recently added 16-source operation support in the ioatdma
driver.
- Some minor fixes / cleanups to mv_xor and ioatdma"
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (99 commits)
dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registers
dma: mv_xor: Remove unneeded NULL address check
ioat: fix ioat3_irq_reinit
ioat: kill msix_single_vector support
raid6test: add new corner case for ioatdma driver
ioatdma: clean up sed pool kmem_cache
ioatdma: fix selection of 16 vs 8 source path
ioatdma: fix sed pool selection
ioatdma: Fix bug in selftest after removal of DMA_MEMSET.
dmatest: verbose mode
dmatest: convert to dmaengine_unmap_data
dmatest: add a 'wait' parameter
dmatest: add basic performance metrics
dmatest: add support for skipping verification and random data setup
dmatest: use pseudo random numbers
dmatest: support xor-only, or pq-only channels in tests
dmatest: restore ability to start test at module load and init
dmatest: cleanup redundant "dmatest: " prefixes
dmatest: replace stored results mechanism, with uniform messages
Revert "dmatest: append verify result to results"
...
|
||
|
Linus Torvalds
|
5a1efc6e68 |
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block IO fixes from Jens Axboe:
"Normally I'd defer my initial for-linus pull request until after the
merge window, but a race was uncovered in the virtio-blk conversion to
blk-mq that could cause hangs. So here's a small collection of fixes
for you to pull:
- The fix for the virtio-blk IO hang reported by Dave Chinner, from
Shaohua and myself.
- Add the Insert blktrace event for blk-mq. This makes 'btt' happy
when it is doing it's state transition analysis.
- Ensure that blk-mq has disk/partition stats enabled by default,
instead of making it opt-in.
- A fix for __bio_add_page() and large sector counts"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq: add blktrace insert event trace
virtio-blk: virtqueue_kick() must be ordered with other virtqueue operations
blk-mq: ensure that we set REQ_IO_STAT so diskstats work
bio: fix argument of __bio_add_page() for max_sectors > 0xffff
|
||
|
Linus Torvalds
|
6d6e352c80 |
md update for 3.13.
Mostly optimisations and obscure bug fixes.
- raid5 gets less lock contention
- raid1 gets less contention between normal-io and resync-io
during resync.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=8RCg
-----END PGP SIGNATURE-----
Merge tag 'md/3.13' of git://neil.brown.name/md
Pull md update from Neil Brown:
"Mostly optimisations and obscure bug fixes.
- raid5 gets less lock contention
- raid1 gets less contention between normal-io and resync-io during
resync"
* tag 'md/3.13' of git://neil.brown.name/md:
md/raid5: Use conf->device_lock protect changing of multi-thread resources.
md/raid5: Before freeing old multi-thread worker, it should flush them.
md/raid5: For stripe with R5_ReadNoMerge, we replace REQ_FLUSH with REQ_NOMERGE.
UAPI: include <asm/byteorder.h> in linux/raid/md_p.h
raid1: Rewrite the implementation of iobarrier.
raid1: Add some macros to make code clearly.
raid1: Replace raise_barrier/lower_barrier with freeze_array/unfreeze_array when reconfiguring the array.
raid1: Add a field array_frozen to indicate whether raid in freeze state.
md: Convert use of typedef ctl_table to struct ctl_table
md/raid5: avoid deadlock when raid5 array has unack badblocks during md_stop_writes.
md: use MD_RECOVERY_INTR instead of kthread_should_stop in resync thread.
md: fix some places where mddev_lock return value is not checked.
raid5: Retry R5_ReadNoMerge flag when hit a read error.
raid5: relieve lock contention in get_active_stripe()
raid5: relieve lock contention in get_active_stripe()
wait: add wait_event_cmd()
md/raid5.c: add proper locking to error path of raid5_start_reshape.
md: fix calculation of stacking limits on level change.
raid5: Use slow_path to release stripe when mddev->thread is null
|
||
|
Linus Torvalds
|
1ee2dcc224 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
"Mostly these are fixes for fallout due to merge window changes, as
well as cures for problems that have been with us for a much longer
period of time"
1) Johannes Berg noticed two major deficiencies in our genetlink
registration. Some genetlink protocols we passing in constant
counts for their ops array rather than something like
ARRAY_SIZE(ops) or similar. Also, some genetlink protocols were
using fixed IDs for their multicast groups.
We have to retain these fixed IDs to keep existing userland tools
working, but reserve them so that other multicast groups used by
other protocols can not possibly conflict.
In dealing with these two problems, we actually now use less state
management for genetlink operations and multicast groups.
2) When configuring interface hardware timestamping, fix several
drivers that simply do not validate that the hwtstamp_config value
is one the driver actually supports. From Ben Hutchings.
3) Invalid memory references in mwifiex driver, from Amitkumar Karwar.
4) In dev_forward_skb(), set the skb->protocol in the right order
relative to skb_scrub_packet(). From Alexei Starovoitov.
5) Bridge erroneously fails to use the proper wrapper functions to make
calls to netdev_ops->ndo_vlan_rx_{add,kill}_vid. Fix from Toshiaki
Makita.
6) When detaching a bridge port, make sure to flush all VLAN IDs to
prevent them from leaking, also from Toshiaki Makita.
7) Put in a compromise for TCP Small Queues so that deep queued devices
that delay TX reclaim non-trivially don't have such a performance
decrease. One particularly problematic area is 802.11 AMPDU in
wireless. From Eric Dumazet.
8) Fix crashes in tcp_fastopen_cache_get(), we can see NULL socket dsts
here. Fix from Eric Dumzaet, reported by Dave Jones.
9) Fix use after free in ipv6 SIT driver, from Willem de Bruijn.
10) When computing mergeable buffer sizes, virtio-net fails to take the
virtio-net header into account. From Michael Dalton.
11) Fix seqlock deadlock in ip4_datagram_connect() wrt. statistic
bumping, this one has been with us for a while. From Eric Dumazet.
12) Fix NULL deref in the new TIPC fragmentation handling, from Erik
Hugne.
13) 6lowpan bit used for traffic classification was wrong, from Jukka
Rissanen.
14) macvlan has the same issue as normal vlans did wrt. propagating LRO
disabling down to the real device, fix it the same way. From Michal
Kubecek.
15) CPSW driver needs to soft reset all slaves during suspend, from
Daniel Mack.
16) Fix small frame pacing in FQ packet scheduler, from Eric Dumazet.
17) The xen-netfront RX buffer refill timer isn't properly scheduled on
partial RX allocation success, from Ma JieYue.
18) When ipv6 ping protocol support was added, the AF_INET6 protocol
initialization cleanup path on failure was borked a little. Fix
from Vlad Yasevich.
19) If a socket disconnects during a read/recvmsg/recvfrom/etc that
blocks we can do the wrong thing with the msg_name we write back to
userspace. From Hannes Frederic Sowa. There is another fix in the
works from Hannes which will prevent future problems of this nature.
20) Fix route leak in VTI tunnel transmit, from Fan Du.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits)
genetlink: make multicast groups const, prevent abuse
genetlink: pass family to functions using groups
genetlink: add and use genl_set_err()
genetlink: remove family pointer from genl_multicast_group
genetlink: remove genl_unregister_mc_group()
hsr: don't call genl_unregister_mc_group()
quota/genetlink: use proper genetlink multicast APIs
drop_monitor/genetlink: use proper genetlink multicast APIs
genetlink: only pass array to genl_register_family_with_ops()
tcp: don't update snd_nxt, when a socket is switched from repair mode
atm: idt77252: fix dev refcnt leak
xfrm: Release dst if this dst is improper for vti tunnel
netlink: fix documentation typo in netlink_set_err()
be2net: Delete secondary unicast MAC addresses during be_close
be2net: Fix unconditional enabling of Rx interface options
net, virtio_net: replace the magic value
ping: prevent NULL pointer dereference on write to msg_name
bnx2x: Prevent "timeout waiting for state X"
bnx2x: prevent CFC attention
bnx2x: Prevent panic during DMAE timeout
...
|
||
Johannes Berg
|
2a94fe48f3 |
genetlink: make multicast groups const, prevent abuse
Register generic netlink multicast groups as an array with the family and give them contiguous group IDs. Then instead of passing the global group ID to the various functions that send messages, pass the ID relative to the family - for most families that's just 0 because the only have one group. This avoids the list_head and ID in each group, adding a new field for the mcast group ID offset to the family. At the same time, this allows us to prevent abusing groups again like the quota and dropmon code did, since we can now check that a family only uses a group it owns. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Johannes Berg
|
68eb55031d |
genetlink: pass family to functions using groups
This doesn't really change anything, but prepares for the next patch that will change the APIs to pass the group ID within the family, rather than the global group ID. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Johannes Berg
|
c53ed74236 |
genetlink: only pass array to genl_register_family_with_ops()
As suggested by David Miller, make genl_register_family_with_ops() a macro and pass only the array, evaluating ARRAY_SIZE() in the macro, this is a little safer. The openvswitch has some indirection, assing ops/n_ops directly in that code. This might ultimately just assign the pointers in the family initializations, saving the struct genl_family_and_ops and code (once mcast groups are handled differently.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Linus Torvalds
|
4007162647 |
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq cleanups from Ingo Molnar: "This is a multi-arch cleanup series from Thomas Gleixner, which we kept to near the end of the merge window, to not interfere with architecture updates. This series (motivated by the -rt kernel) unifies more aspects of IRQ handling and generalizes PREEMPT_ACTIVE" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: preempt: Make PREEMPT_ACTIVE generic sparc: Use preempt_schedule_irq ia64: Use preempt_schedule_irq m32r: Use preempt_schedule_irq hardirq: Make hardirq bits generic m68k: Simplify low level interrupt handling code genirq: Prevent spurious detection for unconditionally polled interrupts |
||
Geert Uytterhoeven
|
6bab2c613d |
genirq: Correct fuzzy and fragile IRQ_RETVAL() definition
commit
|
||
Jens Axboe
|
94eddfbeaa |
blk-mq: ensure that we set REQ_IO_STAT so diskstats work
If disk stats are enabled on the queue, a request needs to be marked with REQ_IO_STAT for accounting to be active on that request. This fixes an issue with virtio-blk not showing up in /proc/diskstats after the conversion to blk-mq. Add QUEUE_FLAG_MQ_DEFAULT, setting stats and same cpu-group completion on by default. Reported-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Alex Shi
|
b972fc308c |
sched: Remove unused variable in 'struct sched_domain'
The 'u64 last_update' variable isn't used now, remove it to save a bit of space. Signed-off-by: Alex Shi <alex.shi@linaro.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Morten.Rasmussen@arm.com Cc: linaro-kernel@lists.linaro.org Link: http://lkml.kernel.org/r/1384852912-24791-1-git-send-email-alex.shi@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Peter Zijlstra
|
d5b5f391d4 |
ftrace, perf: Avoid infinite event generation loop
Vince's perf-trinity fuzzer found yet another 'interesting' problem. When we sample the irq_work_exit tracepoint with period==1 (or PERF_SAMPLE_PERIOD) and we add an fasync SIGNAL handler we create an infinite event generation loop: ,-> <IPI> | irq_work_exit() -> | trace_irq_work_exit() -> | ... | __perf_event_overflow() -> (due to fasync) | irq_work_queue() -> (irq_work_list must be empty) '--------- arch_irq_work_raise() Similar things can happen due to regular poll() wakeups if we exceed the ring-buffer wakeup watermark, or have an event_limit. To avoid this, dis-allow sampling this particular tracepoint. In order to achieve this, create a special perf_perm function pointer for each event and call this (when set) on trying to create a tracepoint perf event. [ roasted: use expr... to allow for ',' in your expression ] Reported-by: Vince Weaver <vincent.weaver@maine.edu> Tested-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Dave Jones <davej@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/20131114152304.GC5364@laptop.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Linus Torvalds
|
13509c3a9d |
Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c changes from Wolfram Sang: - new drivers for exynos5, bcm kona, and st micro - bigger overhauls for drivers mxs and rcar - typical driver bugfixes, cleanups, improvements - got rid of the superfluous 'driver' member in i2c_client struct This touches a few drivers in other subsystems. All acked. * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits) i2c: bcm-kona: fix error return code in bcm_kona_i2c_probe() i2c: i2c-eg20t: do not print error message in syslog if no ACK received i2c: bcm-kona: Introduce Broadcom I2C Driver i2c: cbus-gpio: Fix device tree binding i2c: wmt: add missing clk_disable_unprepare() on error i2c: designware: add new ACPI IDs i2c: i801: Add Device IDs for Intel Wildcat Point-LP PCH i2c: exynos5: Remove incorrect clk_disable_unprepare i2c: i2c-st: Add ST I2C controller i2c: exynos5: add High Speed I2C controller driver i2c: rcar: fixup rcar type naming i2c: scmi: remove some bogus NULL checks i2c: sh_mobile & rcar: Enable the driver on all ARM platforms i2c: sh_mobile: Convert to clk_prepare/unprepare i2c: mux: gpio: use reg value for i2c_add_mux_adapter i2c: mux: gpio: use gpio_set_value_cansleep() i2c: Include linux/of.h header i2c: mxs: Fix PIO mode on i.MX23 i2c: mxs: Rework the PIO mode operation i2c: mxs: distinguish i.MX23 and i.MX28 based I2C controller ... |
||
|
Linus Torvalds
|
1ea406c0e0 |
Main batch of InfiniBand/RDMA changes for 3.13:
- Re-enable flow steering verbs with new improved userspace ABI - Fixes for slow connection due to GID lookup scalability - IPoIB fixes - Many fixes to HW drivers including mlx4, mlx5, ocrdma and qib - Further improvements to SRP error handling - Add new transport type for Cisco usNIC -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.14 (GNU/Linux) iQIcBAABCAAGBQJSil7BAAoJEENa44ZhAt0hbtgP/A+AmUalbOX6ZKzuOFxsrtY2 r55CX9b1JBeFM/Zhn2o6y+81lpCjkckJSggESMe4izNgocGw0nW4vYGN4SBynatj y8sR9OSn+G3ihuENrzG41MJUGEa5WbcNMy4boN+Oa+qyTlV/WjLR7Fv4WbikK7Wm o8FNlXiiDhMoGfHHG5J0MD0EQsnxuLDk2XP+ciu4tLtTs+wBka+gFK8WnMvztle3 gTeMNna5ilvCS2fdBxteuPA3KeDnJE9AgJSMJ2a4Rh+DR8uTgWYQ6n7amjmOc546 yhAKkoBkxPE10+Yj82WOPhCFxSeWcuSwJvpgv5dTVZ1XqUUcC1V3TEcZDHmyyHQ7 uPXgS1A+erBW3OYPBjZqtKvnHObscV12fL+rId3vIhcAQIbFroci08ZwPidEYRkn fvwlEKcrIsBIpRXEyjlFCxsiiDnfq1wC1VayMR3jrIK0P6idf1SXf/geiRp9+RGT wKUc0j51jvEx29qc65xuhEP9FQV9pCMxyd+FEE0d0KkjMz5hsIkjmcUcBbgF0CGg GEyDPlgRLv+vmWDGpT8XraaV/0CJOEQDIgB4WSN87/AZ4UoNt7spW2xqsLsp1toy 5e0100tpWUleTPLe/Wig5GtBdagQ2jAUK1+186CP93pFPtkwc4/7X3hyp7qPIPTz VDvT9DEy6zjSMCLpMcdo =xxC+ -----END PGP SIGNATURE----- Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband/rdma updates from Roland Dreier: - Re-enable flow steering verbs with new improved userspace ABI - Fixes for slow connection due to GID lookup scalability - IPoIB fixes - Many fixes to HW drivers including mlx4, mlx5, ocrdma and qib - Further improvements to SRP error handling - Add new transport type for Cisco usNIC * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (66 commits) IB/core: Re-enable create_flow/destroy_flow uverbs IB/core: extended command: an improved infrastructure for uverbs commands IB/core: Remove ib_uverbs_flow_spec structure from userspace IB/core: Use a common header for uverbs flow_specs IB/core: Make uverbs flow structure use names like verbs ones IB/core: Rename 'flow' structs to match other uverbs structs IB/core: clarify overflow/underflow checks on ib_create/destroy_flow IB/ucma: Convert use of typedef ctl_table to struct ctl_table IB/cm: Convert to using idr_alloc_cyclic() IB/mlx5: Fix page shift in create CQ for userspace IB/mlx4: Fix device max capabilities check IB/mlx5: Fix list_del of empty list IB/mlx5: Remove dead code IB/core: Encorce MR access rights rules on kernel consumers IB/mlx4: Fix endless loop in resize CQ RDMA/cma: Remove unused argument and minor dead code RDMA/ucma: Discard events for IDs not yet claimed by user space IB/core: Add Cisco usNIC rdma node and transport types RDMA/nes: Remove self-assignment from nes_query_qp() IB/srp: Report receive errors correctly ... |
||
|
Linus Torvalds
|
a709bd585f |
Highlights:
- A new driver for TI BQ24735 Battery Chargers, courtesy of NVidia. - Device tree bindings for TWL4030 chips. - Random fixes and cleanups. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.14 (GNU/Linux) iQIcBAABAgAGBQJSiXSwAAoJEGgI9fZJve1bJBgQAJKXIYXqZG5AwCqtFXltN0S5 qYmxiaxUekQyesBxRNNb6LwgWEBUF+lQtmfhDpSaHwi6aRc7pmSQaVw6tfD1dpBe bAEHrWu1YD8v6rwhrhB91kv9F81ea06pfUtyUAwDpbchGq/VaN/tsUT4uO5E/AIT K7tWZzjmGyQ79186HUnDxmgb0lA1PPDypsuv/pP1KgrioKNPHskDqhLeS2YuCe6J WUHiGb3cDB8Tu2+Af5OIxXio5J74486KvjlH1K9+ziixUrU0P380D26JshklgIsG qWc1hu9DSO+r76N7HV0EzbpJNqZNEFJiXaXSozgA/yRtJy+ISEIVXJE9oDwW7SxH thLveZTck6VQ6CyggAh2nn9KPVrpFYUcy+HFshpM7V4xugjcAe9Bq9i5cWwJHvn9 Xy4G2s2MS81PFdKEGc9JjSwvXULTRTMAe5gMMfwAqnn+Xuf2+KSCtTlOnPkON/sa cNraBFTSVi33yCEHS9BO7BKbb5ikPNtAaAB+4VszwMQbUysPld7WvEpEOIUOaoJO EYgsM1VOLV0cYO5Qwu9Yxplrjmz/l+kNxAgtCW21SV14DjUbnV9ZuhL5Gx4jbLyY T1uiREtzpTUGoKhZHqWHKXtoEUW+d48nkDXbO+IbKmKPTF6bn0TuZmW0sNU/ZHb8 yNJPZKinHfUE6heJCX2X =rT+j -----END PGP SIGNATURE----- Merge tag 'for-v3.13' of git://git.infradead.org/battery-2.6 Pull battery updates from Anton Vorontsov: "Highlights: - A new driver for TI BQ24735 Battery Chargers, courtesy of NVidia. - Device tree bindings for TWL4030 chips. - Random fixes and cleanups" * tag 'for-v3.13' of git://git.infradead.org/battery-2.6: pm2301-charger: Remove unneeded NULL checks twl4030_charger: Add devicetree support power_supply: Fix documentation for TEMP_*ALERT* properties max17042_battery: Support regmap to access device's registers max17042_battery: Use SIMPLE_DEV_PM_OPS charger-manager : Replace kzalloc to devm_kzalloc and remove uneccessary code bq2415x_charger: Fix max battery regulation voltage tps65090-charger: Use "IS_ENABLED(CONFIG_OF)" for DT code tps65090-charger: Drop devm_free_irq of devm_ allocated irq power_supply: Add support for bq24735 charger pm2301-charger: Staticize pm2xxx_charger_die_therm_mngt pm2301-charger: Check return value of regulator_enable ab8500-charger: Remove redundant break ab8500-charger: Check return value of regulator_enable isp1704_charger: Fix driver to work with changes introduced in v3.5 |
||
|
Linus Torvalds
|
c2ac2ae44d |
MMC highlights for 3.13:
Core:
- Improve runtime PM support, remove mmc_{suspend,resume}_host().
- Add MMC_CAP_RUNTIME_RESUME, for delaying MMC resume until we're
outside of the resume sequence (in runtime_resume) to decrease
system resume time.
Drivers:
- dw_mmc: Support HS200 mode.
- sdhci-eshdc-imx: Support SD3.0 SDR clock tuning, DDR on IMX6.
- sdhci-pci: Add support for Intel Clovertrail and Merrifield.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=JDGc
-----END PGP SIGNATURE-----
Merge tag 'mmc-updates-for-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Pull MMC updates from Chris Ball:
"MMC highlights for 3.13:
Core:
- Improve runtime PM support, remove mmc_{suspend,resume}_host().
- Add MMC_CAP_RUNTIME_RESUME, for delaying MMC resume until we're
outside of the resume sequence (in runtime_resume) to decrease
system resume time.
Drivers:
- dw_mmc: Support HS200 mode.
- sdhci-eshdc-imx: Support SD3.0 SDR clock tuning, DDR on IMX6.
- sdhci-pci: Add support for Intel Clovertrail and Merrifield"
* tag 'mmc-updates-for-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (108 commits)
mmc: wbsd: Silence compiler warning
mmc: core: Silence compiler warning in __mmc_switch
mmc: sh_mmcif: Convert to clk_prepare|unprepare
mmc: sh_mmcif: Convert to PM macros when defining dev_pm_ops
mmc: dw_mmc: exynos: Revert the sdr_timing assignment
mmc: sdhci: Avoid needless loop while handling SDIO interrupts in sdhci_irq
mmc: core: Add MMC_CAP_RUNTIME_RESUME to resume at runtime_resume
mmc: core: Improve runtime PM support during suspend/resume for sd/mmc
mmc: core: Remove redundant mmc_power_up|off at runtime callbacks
mmc: Don't force card to active state when entering suspend/shutdown
MIPS: db1235: Don't use MMC_CLKGATE
mmc: core: Remove deprecated mmc_suspend|resume_host APIs
mmc: mmci: Move away from using deprecated APIs
mmc: via-sdmmc: Move away from using deprecated APIs
mmc: tmio: Move away from using deprecated APIs
mmc: sh_mmcif: Move away from using deprecated APIs
mmc: sdricoh_cs: Move away from using deprecated APIs
mmc: rtsx: Remove redundant suspend and resume callbacks
mmc: wbsd: Move away from using deprecated APIs
mmc: pxamci: Remove redundant suspend and resume callbacks
...
|
||
|
Linus Torvalds
|
b29c8306a3 |
This batch of changes is mostly clean ups and small bug fixes.
The only real feature that was added this release is from Namhyung Kim, who introduced "set_graph_notrace" filter that lets you run the function graph tracer and not trace particular functions and their call chain. Tom Zanussi added some updates to the ftrace multibuffer tracing that made it more consistent with the top level tracing. One of the fixes for perf function tracing required an API change in RCU; the addition of "rcu_is_watching()". As Paul McKenney is pushing that change in this release too, he gave me a branch that included all the changes to get that working, and I pulled that into my tree in order to complete the perf function tracing fix. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.14 (GNU/Linux) iQEcBAABAgAGBQJSgX5SAAoJEKQekfcNnQGulUAH/jORqJrKaNAulmZ314VsAqfa zMtF5UAAPf7kqc3AN/jtFrhJUNEfxWOo7A4r0FsM/rKdWJF+98GA6aqYVD+XoWFt +36fg1enxbXUjixQ96Uh+o1+BJUgYDqljuWzqSu/oiXWfWwl8+WL4kcbhb+V9WcF SpdzLCWVZRfhyDiN3+0zvyQ8RSG2Pd7CWn9zroI0e4sxGo0Ki6JUnIcXtZGOBDOQ IIZdjXvGSfpJ+3u3XvRPXJcltRCtOsVWxYzrmvRlmHDW5QMe1+WmmrlojTePrLaJ xn8+3WINqetAR+ZQnazbpt1XzJzKa8QtFgpiN0kT6qL7cg3N1Owc4vLGohl7wok= =Nesf -----END PGP SIGNATURE----- Merge tag 'trace-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing update from Steven Rostedt: "This batch of changes is mostly clean ups and small bug fixes. The only real feature that was added this release is from Namhyung Kim, who introduced "set_graph_notrace" filter that lets you run the function graph tracer and not trace particular functions and their call chain. Tom Zanussi added some updates to the ftrace multibuffer tracing that made it more consistent with the top level tracing. One of the fixes for perf function tracing required an API change in RCU; the addition of "rcu_is_watching()". As Paul McKenney is pushing that change in this release too, he gave me a branch that included all the changes to get that working, and I pulled that into my tree in order to complete the perf function tracing fix" * tag 'trace-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Add rcu annotation for syscall trace descriptors tracing: Do not use signed enums with unsigned long long in fgragh output tracing: Remove unused function ftrace_off_permanent() tracing: Do not assign filp->private_data to freed memory tracing: Add helper function tracing_is_disabled() tracing: Open tracer when ftrace_dump_on_oops is used tracing: Add support for SOFT_DISABLE to syscall events tracing: Make register/unregister_ftrace_command __init tracing: Update event filters for multibuffer recordmcount.pl: Add support for __fentry__ ftrace: Have control op function callback only trace when RCU is watching rcu: Do not trace rcu_is_watching() functions ftrace/x86: skip over the breakpoint for ftrace caller trace/trace_stat: use rbtree postorder iteration helper instead of opencoding ftrace: Add set_graph_notrace filter ftrace: Narrow down the protected area of graph_lock ftrace: Introduce struct ftrace_graph_data ftrace: Get rid of ftrace_graph_filter_enabled tracing: Fix potential out-of-bounds in trace_get_user() tracing: Show more exact help information about snapshot |
||
|
Linus Torvalds
|
0bde7294e2 |
pwm: Changes for v3.13-rc1
Mostly bug fixes and clean up. There is a new driver, which is actually moving a custom PWM driver from drivers/misc. The majority of the patches are enhancements to the device tree support in the pwm-backlight driver. Backlights can now additionally be powered using a regulator and enabled using a GPIO in addition to just the PWM input. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABAgAGBQJSh1s7AAoJEN0jrNd/PrOhdS4P/1A/Tx05pP0ACsizhkB4Ro02 XgjIusWw/jp+3LWXrlaReVNb5H6GlahDT5+2/ApAw06o7INGvpSzyI1fuFQ2DU6K L7MgWDSifeL7jiwfUq5f3Qv4Vccjgii0z4BBQI5ZpPluIzKpo2uhz7gIjBR3wPu9 i34bc902SL/DrlvbMUsRHlYT9Ok3TpsPynk0pmw8xrUZDqRAX7DZH0EmvMkVsDo2 T1vt9gQVTFVgIwlRUBcbrjbu1GnYaV20s+piQhYm1RMSUqY+ArldWKzEzlN3tLYc XdnkaLikdHDRBA4DeNPJGbPU8LQax8wCTaZa1PgT0PqjNX/dCkg3hsc1Em0dH9Zh PKvyX8R6iPdOcakkRm4qdVIacblqE1HYM7T+lyVhu6XP7MWkUmNr05HQBFjhOMcm whv1gS/EeB4y/FcSzn7S23UAmOvxiWfGnOMlnazrOgS00FrbC4accgSB/iXi2lDC szO9MHwfbwDTp8WBLEw8iTPODpq7pnFcBCw80pzblMFqC8v1MAFyriwT7BUmKcR/ h/V75Q95VPAKq+uKsfb5Ruwa9CGKs8ACagLR0BuErT/J83Q7Q4Ezf56FUCvrGDtz 5AWpGUakotwHtJPx6TAOgI+237MFh/GpIOrlEtz+2b5SP6ftHxr8rj+wg1sxmI2y JohOUIFjHtcA4UifhlTU =CB+z -----END PGP SIGNATURE----- Merge tag 'pwm/for-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm changes from Thierry Reding: "Mostly bug fixes and clean up. There is a new driver, which is actually moving a custom PWM driver from drivers/misc. The majority of the patches are enhancements to the device tree support in the pwm-backlight driver. Backlights can now additionally be powered using a regulator and enabled using a GPIO in addition to just the PWM input" * tag 'pwm/for-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (30 commits) Documentation/pwm: Update supported SoC name for pwm-samsung pwm: samsung: Fix kernel warning while unexporting a channel MAINTAINERS: Move PWM subsystem tree to kernel.org Documentation/pwm: Fix trivial typos pwm-backlight: Remove unused variable pwm_backlight: avoid short blank screen while doing hibernation pwm-backlight: Fix brightness adjustment pwm: add ep93xx PWM support pwm-backlight: Allow for non-increasing brightness levels pwm-backlight: Add power supply support pwm-backlight: Use new enable_gpio field unicore32: Initialize PWM backlight enable_gpio field ARM: shmobile: Initialize PWM backlight enable_gpio field ARM: SAMSUNG: Initialize PWM backlight enable_gpio field ARM: pxa: Initialize PWM backlight enable_gpio field ARM: OMAP: Initialize PWM backlight enable_gpio field pwm-backlight: Add optional enable GPIO pwm-backlight: Track enable state pwm-backlight: Refactor backlight power on/off pwm-backlight: Improve readability ... |
||
|
Linus Torvalds
|
449bf8d03c |
Merge branch 'nfsd-next' of git://linux-nfs.org/~bfields/linux
Pull nfsd changes from Bruce Fields: "This includes miscellaneous bugfixes and cleanup and a performance fix for write-heavy NFSv4 workloads. (The most significant nfsd-relevant change this time is actually in the delegation patches that went through Viro, fixing a long-standing bug that can cause NFSv4 clients to miss updates made by non-nfs users of the filesystem. Those enable some followup nfsd patches which I have queued locally, but those can wait till 3.14)" * 'nfsd-next' of git://linux-nfs.org/~bfields/linux: (24 commits) nfsd: export proper maximum file size to the client nfsd4: improve write performance with better sendspace reservations svcrpc: remove an unnecessary assignment sunrpc: comment typo fix Revert "nfsd: remove_stid can be incorporated into nfs4_put_delegation" nfsd4: fix discarded security labels on setattr NFSD: Add support for NFS v4.2 operation checking nfsd4: nfsd_shutdown_net needs state lock NFSD: Combine decode operations for v4 and v4.1 nfsd: -EINVAL on invalid anonuid/gid instead of silent failure nfsd: return better errors to exportfs nfsd: fh_update should error out in unexpected cases nfsd4: need to destroy revoked delegations in destroy_client nfsd: no need to unhash_stid before free nfsd: remove_stid can be incorporated into nfs4_put_delegation nfsd: nfs4_open_delegation needs to remove_stid rather than unhash_stid nfsd: nfs4_free_stid nfsd: fix Kconfig syntax sunrpc: trim off EC bytes in GSSAPI v2 unwrap gss_krb5: document that we ignore sequence number ... |
||
Vinod Koul
|
df12a3178d |
Merge commit 'dmaengine-3.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine
Pull dmaengine changes from Dan 1/ Bartlomiej and Dan finalized a rework of the dma address unmap implementation. 2/ In the course of testing 1/ a collection of enhancements to dmatest fell out. Notably basic performance statistics, and fixed / enhanced test control through new module parameters 'run', 'wait', 'noverify', and 'verbose'. Thanks to Andriy and Linus for their review. 3/ Testing the raid related corner cases of 1/ triggered bugs in the recently added 16-source operation support in the ioatdma driver. 4/ Some minor fixes / cleanups to mv_xor and ioatdma. Conflicts: drivers/dma/dmatest.c Signed-off-by: Vinod Koul <vinod.koul@intel.com> |