Fixup some fallout of the fallout of atomic dpms, few mdp5 cursor
fixes, fix a leak in error path, and some fixes for kexec
* 'msm-fixes-4.0' of git://people.freedesktop.org/~robclark/linux:
drm/msm: kexec fixes
drm/msm/mdp5: fix cursor blending
drm/msm/mdp5: fix cursor ROI
drm/msm/atomic: Don't leak atomic commit object when commit fails
drm/msm/mdp5: Avoid flushing registers when CRTC is disabled
drm/msm: update generated headers (add 6th lm.base entry)
drm/msm/mdp5: fixup "drm/msm: fix fallout of atomic dpms changes"
In kexec environment, we are more likely to encounter irq's already
enabled from previous environment. At which point we find that writes
to disable/clear pending irq's are slightly less than useless without
first enabling clocks.
TODO: full blown state read-in so kexec'd kernel can inherit the mode
already setup.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Seems like we just want BLEND_EN and not BLEND_TRANSP_EN (setting the
latter results in black pixels in the cursor image treated as
transparent).
Signed-off-by: Rob Clark <robdclark@gmail.com>
If cursor is set near the edge of the screen, it is not valid to use the
new cursor width/height as the ROI dimensions. Split out the ROI calc
and use it both cursor_set and cursor_move.
Signed-off-by: Rob Clark <robdclark@gmail.com>
If the atomic commit fails due to completion wait interruption the
atomic commit object is not freed and is thus leaked. Free it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
When a CRTC is disabled, no CTL is allocated to it (CRTC->ctl == NULL);
in that case we should not try to FLUSH registers and do nothing instead.
This can happen when we try to move a cursor but the CRTC's CTL
(CONTROL) has not been allocated yet (inactive CRTC).
It can also happens when we .atomic_check()/.atomic_flush() on a
disabled CRTC.
A CTL needs to be kept as long as the CRTC is alive. Releasing it
after the last VBlank is safer than in .atomic_flush().
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Some target have up to 6 layer mixers (LM).
Let the header file access the last LM's base address.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Commit 0b776d457b ("drm/msm: fix fallout of atomic dpms
changes") has a typo in both mdp5_encoder_helper_funcs and
mdp5_crtc_helper_funcs definitions:
.dpms entry should be replaced by .disable and .enable
Also fixed a typo in mdp5_encoder_enable().
Note that these typos are only present for MDP5. MDP4 is fine.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Radeon fixes for 4.0:
- Fix some fallout from the audio rework
- Fix a possible oops in the CS ioctl
- Fix interlaced modes on DCE8
- Do a posting read in irq_set callbacks to make sure
interrupts are properly flushed through the pci bridge
* 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: fix interlaced modes on DCE8
drm/radeon: fix DRM_IOCTL_RADEON_CS oops
drm/radeon: do a posting read in cik_set_irq
drm/radeon: do a posting read in si_set_irq
drm/radeon: do a posting read in evergreen_set_irq
drm/radeon: do a posting read in r600_set_irq
drm/radeon: do a posting read in rs600_set_irq
drm/radeon: do a posting read in r100_set_irq
radeon/audio: fix DP audio on DCE6
radeon/audio: fix whitespace
drm/radeon: adjust audio callback order
drm/radeon: properly set dto for dp on DCE4/5
drm/radeon/audio: update EDID derived fields in modeset
drm/radeon: don't toggle audio state in modeset
drm/radeon/audio: set mute around state setup
drm/radeon: assign pin in detect
drm/radeon: fix the audio dpms callbacks
We need to store device offsets in 64 bit as the device
address space may be larger than the CPU's.
Fixes GPU init failures on radeons with 4GB or more of
vram on 32 bit kernels. We put vram at the start of the
GPU's address space so the gart aperture starts at 4 GB
causing all GPU addresses in the gart aperture to get
truncated.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=89072
[airlied: fix warning on nouveau build]
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: thellstrom@vmware.com
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The current implementation is limited by the number of addresses that
fit into an unsigned long. This causes problems on 32-bit Tegra where
unsigned long is 32-bit but drm_mm is used to manage an IOVA space of
4 GiB. Given the 32-bit limitation, the range is limited to 4 GiB - 1
(or 4 GiB - 4 KiB for page granularity).
This commit changes the start and size of the range to be an unsigned
64-bit integer, thus allowing much larger ranges to be supported.
[airlied: fix i915 warnings and coloring callback]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
fixupo
Split DCE6 and DCE8 programming of DCCG_AUDIO_DTO1
registers to properly enable DP audio for both DCE
revisions.
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Move it out of the UNIPHY case to handle older DCE blocks.
- set audio dpms before video dpms
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We don't necessarily have an EDID at this point when
audio detect gets called. Ideally we'd update these
fields in detect, but that requires a larger rework
of the display detect code.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise Kconfig gets confused and somehow ends up creating a 2nd drm
submenu. I couldn't find i915 because of this any more at first.
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: linux-kbuild@vger.kernel.or
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
- A clock fix for too large pixel clocks depending on the
DI clock flag simplification patch
- Pruning of unsupported modes and a missing end of array element
for dw_hdmi-imx
- LVDS modeset fix for mode fixup
- Fix parallel-display deferred probing if drm_panel is used
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CrJz
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-fixes-2015-02-24' of git://git.pengutronix.de/git/pza/linux into drm-fixes
imx-drm fixes for mode fixup, dw_hdmi/imx, and parallel-display
- A clock fix for too large pixel clocks depending on the
DI clock flag simplification patch
- Pruning of unsupported modes and a missing end of array element
for dw_hdmi-imx
- LVDS modeset fix for mode fixup
- Fix parallel-display deferred probing if drm_panel is used
* tag 'imx-drm-fixes-2015-02-24' of git://git.pengutronix.de/git/pza/linux:
DRM: i.MX: parallel display: Support probe deferral for finding DRM panel
drm/imx: imx-ldb: enable DI clock in encoder_mode_set
drm/imx: dw_hdmi-imx: add end of array element to current control array
drm/imx: dw_hdmi-imx: add mode_valid callback prune unsupported modes
gpu: ipu-v3: do not divide by zero if the pixel clock is too large
minor atmel hclcdc fixes.
* 'drm-atmel-hlcdc-fixes' of git://github.com/bbrezillon/linux-at91:
drm: atmel-hlcdc: remove clock polarity from crtc driver
drm: atmel-hlcdc: remove useless pm_runtime_put_sync in probe
drm: atmel-hlcdc: reset layer A2Q and UPDATE bits when disabling it
First batch of fixes for v4.0-rc, plenty of cc: stable material.
* tag 'drm-intel-fixes-2015-02-26' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Fix frontbuffer false positve.
drm/i915: Align initial plane backing objects correctly
drm/i915: avoid processing spurious/shared interrupts in low-power states
drm/i915: Check obj->vma_list under the struct_mutex
drm/i915: Fix a use after free, and unbalanced refcounting
drm/i915: Dell Chromebook 11 has PWM backlight
drm/i915/skl: handle all pixel formats in skylake_update_primary_plane()
drm/i915/bdw: PCI IDs ending in 0xb are ULT.
Remove this configuration bit in crtc driver as the rising edge clock is widely
used.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
We were enabling DP secondary streams even if the monitor
didn't support them. Fixes display problems on some DP
monitors.
Tested-by: Jim Boz <jim876@xs4all.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The atom aux param interface only supports 4 bits for
the total write transfer size (header + payload). This
limits us to 12 bytes of payload rather than 16. Add a
check for this. Reads are not affected.
v2: switch to WARN_ON_ONCE
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The logic was reversed from what the hw actually exposed.
Fixes graphics corruption in certain harvest configurations.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Dump the whole IB if we run into an invalid packet.
This makes things much easier to debug.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=89148
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit b7bc596ebb ("drm/radeon: disable native
backlight control on pre-r6xx asics (v2)") accidently
broke backlight control on old mac laptops that use the
on-GPU backlight controller.
Signed-off-by: Nathan-J. Hirschauer <nathanhi@deepserve.info>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This return 0 without setting atomic bits on fb == crtc->cursor->fb
where causing frontbuffer false positives.
According to Daniel:
The original regression seems to have been introduced in the original
check/commit split:
commit 757f9a3e5b
Author: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Date: Wed Sep 24 14:20:24 2014 -0300
drm/i915: move check of intel_crtc_cursor_set_obj() out
Which already cause other trouble, resulting in the check getting moved in
commit e391ea882b
Author: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Date: Wed Sep 24 14:20:25 2014 -0300
drm/i915: Fix not checking cursor and object sizes
The frontbuffer tracking itself only was broken when we shifted it into
the check/commit logic with:
commit 32b7eeec4d
Author: Matt Roper <matthew.d.roper@intel.com>
Date: Wed Dec 24 07:59:06 2014 -0800
drm/i915: Refactor work that can sleep out of commit (v7)
v2: When putting more debug prints I notice the solution was simpler
than I thought. AMS design is solid, just this return was wrong.
Sorry for the noise.
v3: Remove the entire chunck that would probably
be removed by gcc anyway. (by Daniel)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Some bios really like to joke and start the planes at an offset ...
hooray!
Align start and end to fix this.
v2: Fixup calculation of size, spotted by Chris Wilson.
v3: Fix serious fumble I've just spotted.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86883
Cc: stable@vger.kernel.org
Cc: Johannes W <jargon@molb.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reported-and-tested-by: Johannes W <jargon@molb.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
[Jani: split WARN_ONs, rebase on v4.0-rc1]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Atm, it's possible that the interrupt handler is called when the device
is in D3 or some other low-power state. It can be due to another device
that is still in D0 state and shares the interrupt line with i915, or on
some platforms there could be spurious interrupts even without sharing
the interrupt line. The latter case was reported by Klaus Ethgen using a
Lenovo x61p machine (gen 4). He noticed this issue via a system
suspend/resume hang and bisected it to the following commit:
commit e11aa36230
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Wed Jun 18 09:52:55 2014 -0700
drm/i915: use runtime irq suspend/resume in freeze/thaw
This is a problem, since in low-power states IIR will always read
0xffffffff resulting in an endless IRQ servicing loop.
Fix this by handling interrupts only when the driver explicitly enables
them and so it's guaranteed that the interrupt registers return a valid
value.
Note that this issue existed even before the above commit, since during
runtime suspend/resume we never unregistered the handler.
v2:
- clarify the purpose of smp_mb() vs. synchronize_irq() in the
code comment (Chris)
v3:
- no need for an explicit smp_mb(), we can assume that synchronize_irq()
and the mmio read/writes in the install hooks provide for this (Daniel)
- remove code comment as the remaining synchronize_irq() is self
explanatory (Daniel)
v4:
- drm_irq_uninstall() implies synchronize_irq(), so no need to call it
explicitly (Daniel)
Reference: https://lkml.org/lkml/2015/2/11/205
Reported-and-bisected-by: Klaus Ethgen <Klaus@Ethgen.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When we walk the list of vma, or even for protecting against concurrent
framebuffer creation, we must hold the struct_mutex or else a second
thread can corrupt the list as we walk it.
Fixes regression from
commit d7f46fc4e7
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date: Fri Dec 6 14:10:55 2013 -0800
drm/i915: Make pin count per VMA
References: https://bugs.freedesktop.org/show_bug.cgi?id=89085
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When converting from implicitly tracked execlist queue items to ref counted
requests, not all frees of requests were replaced with unrefs, and extraneous
refs/unrefs of contexts were added.
Correct the unbalanced refcount & replace the frees.
Remove a noisy warning when hitting the request creation path.
drm_i915_gem_request and intel_context are both kref reference counted
structures. Upon allocation, drm_i915_gem_request's ref count should be
bumped using kref_init. When a context is assigned to the request,
the context's reference count should be bumped using i915_gem_context_reference.
i915_gem_request_reference will reduce the context reference count when
the request is freed.
Problem introduced in
commit 6d3d8274bc
Author: Nick Hoath <nicholas.hoath@intel.com>
AuthorDate: Thu Jan 15 13:10:39 2015 +0000
drm/i915: Subsume intel_ctx_submit_request in to drm_i915_gem_request
v2: Added comments explaining how the ctx pointer and the request object should
be ref-counted. Removed noisy warning.
v3: Cleaned up the language used in the commit & the header
description (Thanks David Gordon)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88652
Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Thomas Daniel <thomas.daniel@intel.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Remove a useless pm_runtime_put_sync leading to unbalanced
usage_count.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
