instead of having multiple return points, use
a goto statement to make that clearer.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Always return IRQ_HANDLED otherwise we could get our IRQ line disabled due
to many spurious IRQs.
Signed-off-by: Felipe Balbi <balbi@ti.com>
[Trivial changes to commitlogs]
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
omap_i2c_dev is allocated with kzalloc(),
so we need not initialize b_hw to zero.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
that way we can ignore TX IRQs while in receiver
mode and ignore RX IRQs while in transmitter mode.
Signed-off-by: Felipe Balbi <balbi@ti.com>
[Remove unnecessary braces]
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
that's a nice helper from drivers core which
will give us the exact IRQ number, instead
of a pointer to an IRQ resource.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
According to flow diagrams on OMAP TRMs,
we should ACK the IRQ as they happen.
Signed-off-by: Felipe Balbi <balbi@ti.com>
[Ack the stat OMAP_I2C_STAT_AL in case of arbitration lost]
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
this will make sure that we execute at least once.
No functional changes otherwise.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
re-factor the common parts to a separate function,
so that code is easier to read and understand.
No functional changes.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Make it not depend on ISR's local variables
in order to make it easier to re-factor the
transmit data loop.
Also since we are waiting for XUDF(Transmitter underflow) just before
writing data lets not flag the underflow.
This is anyways going to go once we write
the data.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
While they do pretty much the same thing, there
are a few peculiarities. Specially WRT erratas,
it's best to split those out and re-factor the
read/write loop to another function which both
cases call.
This last part will be done on another patch.
While at that, also avoid an unncessary register
read since dev->fifo_len will always contain the
correct amount of data to be transferred.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
stat & BIT(1) is the same as BIT(1), so let's
simplify things a bit by removing "stat &" from
all omap_i2c_ack_stat() calls.
Code snippet (extremely simplified):
if (stat & NACK) {
...
omap_i2c_ack_stat(dev, stat & NACK);
}
if (stat & RDR) {
...
omap_i2c_ack_stat(dev, stat & RDR);
}
and so on. The tricky place is only WRT errata handling, for example:
if (*stat & (NACK | AL)) {
omap_i2c_ack_stat(dev, *stat & (XRDY | XDR));
...
}
but in this case, the errata says we must clear XRDY and XDR if that
errata triggers, so if they just got enabled or not, it doesn't matter.
Another tricky place is RDR | RRDY (likewise for XDR | XRDY):
if (stat & (RDR | RRDY)) {
...
omap_i2c_ack_stat(dev, stat & (RDR | RRDY));
}
again here there will be no issues because those IRQs never fire
simultaneously and one will only after after we have handled the
previous, that's because the same FIFO is used anyway and we won't shift
data into FIFO until we tell the IP "hey, I'm done with the FIFO, you
can shift more data"
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-by : Santosh Shilimkar <santosh.shilimkar@ti.com>
[Added the explaination from the discurssion to the commit logs]
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
trivial patch to aid readability. No functional
changes.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
The patch intends to decrease the indentation level on the
data handling
by using the fact that else of if (dev->buf_len) is same as
if (!dev->buf_len)
if (dev->buf_len) {
aaa;
} else {
bbb;
break;
}
to
if (!dev->buf_len) {
bbb;
break;
}
aaa;
Hence no functional changes.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-by : Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
trivial patch, no functional changes
If the fifo is disabled or fifo_size is 0 the num_bytes
is set to 1. Else it is set to fifo_size or in case of a
draining interrupt the remaining bytes in the buff stat.
So the zero check is redundant and can be safely optimised.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-by : Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
that helps deleting some boiler plate code
and lets driver-core manage our resources
for us.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Still use i2c-gpio on boards which have a SoC with a TWI IP which
doesn't have clock stretching in transmission mode.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Add TWI nodes for atmel SoCs but keep i2c-gpio ones in order to let the
choice to the user in dts files.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
As indicated in the datasheet, TWD and TWCK must not be programmed as
open-drain.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nikolaus Voss <n.voss@weinmann.de>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
The G45 datasheets explicitly states that setting the open drain property
on peripheral function gpios is not allowed. (How about other A91 chips?)
Signed-off-by: Nikolaus Voss <n.voss@weinmann.de>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
This driver has the following properties compared to the old driver:
1. Support for multiple interfaces.
2. Interrupt driven I/O as opposed to polling/busy waiting.
3. Support for _one_ repeated start (Sr) condition, which is enough
for most real-world applications including all SMBus transfer types.
(The hardware does not support issuing arbitrary Sr conditions on the
bus.)
testing: SoC: at91sam9g45
- BQ20Z80 battery SMBus client.
- on a 2.6.38 kernel with several i2c clients (temp-sensor,
audio-codec, touchscreen-controller, w1-bridge, io-expanders)
Signed-off-by: Nikolaus Voss <n.voss@weinmann.de>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Tested-by: Hubert Feurstein <h.feurstein@gmail.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com>
[wsa: squashed with the following patches from Ludovic to have some flaws
fixed:
i2c: at91: use managed resources
i2c: at91: add warning about transmission issues for some devices
i2c: at91: use an id table for SoC dependent parameters
]
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
It will get replaced by a superior one. Safe to remove since this one
depends on BROKEN anyhow.
Signed-off-by: Nikolaus Voss <n.voss@weinmann.de>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com>
[wsa: added commit message]
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
The old driver used con_id clock entries. Convert to use dev_id
for clock lookup via standard method.
Signed-off-by: Nikolaus Voss <n.voss@weinmann.de>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
The regulator fetched by the Nomadik I2C driver is actually a
voltage domain regulator. Stop doing this in the driver and
let the power domain code handle any regulators, as discussed
on the list.
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
add of support for the davinci i2c driver.
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
[wsa: fix indentation in the binding description]
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Use dev_dbg logging style as it is done in other parts of this driver.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
It is useful information in dmesg to have a message indicating that the i2c
driver was succesfully registered, so promote it to dev_info.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Pull DMA-mapping fixes from Marek Szyprowski:
"Another set of fixes for ARM dma-mapping subsystem.
Commit e9da6e9905 replaced custom consistent buffer remapping code
with generic vmalloc areas. It however introduced some regressions
caused by limited support for allocations in atomic context. This
series contains fixes for those regressions.
For some subplatforms the default, pre-allocated pool for atomic
allocations turned out to be too small, so a function for setting its
size has been added.
Another set of patches adds support for atomic allocations to
IOMMU-aware DMA-mapping implementation.
The last part of this pull request contains two fixes for Contiguous
Memory Allocator, which relax too strict requirements."
* 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
ARM: dma-mapping: IOMMU allocates pages from atomic_pool with GFP_ATOMIC
ARM: dma-mapping: Introduce __atomic_get_pages() for __iommu_get_pages()
ARM: dma-mapping: Refactor out to introduce __in_atomic_pool
ARM: dma-mapping: atomic_pool with struct page **pages
ARM: Kirkwood: increase atomic coherent pool size
ARM: DMA-Mapping: print warning when atomic coherent allocation fails
ARM: DMA-Mapping: add function for setting coherent pool size from platform code
ARM: relax conditions required for enabling Contiguous Memory Allocator
mm: cma: fix alignment requirements for contiguous regions
Pull HID updates from Jiri Kosina:
"It contains a fix for Eaton Ellipse MAX UPS from Alan Stern,
performance improvement (not processing debug data if noone is
interested), by Henrik Rydberg, and allowing tpkbd-driven devices to
work even with generic driver in a crippled mode, by Andres Freund."
* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: tpkbd: work even if the new Lenovo Keyboard driver is not configured
HID: Only dump input if someone is listening
HID: add NOGET quirk for Eaton Ellipse MAX UPS
c1dcad2d32 added a new driver configured by
HID_LENOVO_TPKBD but made the hid_have_special_driver entry non-optional which
lead to a recognized but non-working device if the new driver wasn't
configured (which is the correct default).
Signed-off-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Fix for TLB flushing introduced in v3.6
* Fix Xen-SWIOTLB not using proper DMA mask - device had 64bit but
in a 32-bit kernel we need to allocate for coherent pages from a
32-bit pool.
* When trying to re-use P2M nodes we had a one-off error and triggered
a BUG_ON check with specific CONFIG_ option.
* When doing FLR in Xen-PCI-backend we would first do FLR then save the
PCI configuration space. We needed to do it the other way around.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJQSS7TAAoJEFjIrFwIi8fJOBQH/03JBKBbFvewhop8T5Jww2c9
SWmMgzDm5HkxeWj5XnM+zlLoHrYFFu7tyuRLiny4weE0LdRl4adJ1TVpStxap/b6
MSQKe+tZevslaReBOsMpbCk3z7fEWNlAcpm6wMp1xYmLoHcr0JMpOCmzigbf7dwM
F4UWULheih9ME3UeqDAU8qgvfv6ccZ9vempO4TDWKjxfxfWODCNMRx+Ny+C7NNRk
QeoInHJUqcRkg0q0OIciF/YYDmn8hIH7HgfqomuMb6rEv2LOieLnWVuniEPWM75s
lECxro7v2Z9s1Std0WWKcFp8VZpI2scnQYU8aL8TpewHcbzKHQYyipuKPu7FiEQ=
=GfLE
-----END PGP SIGNATURE-----
Merge tag 'stable/for-linus-3.6-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Pull Xen bug-fixes from Konrad Rzeszutek Wilk:
* Fix for TLB flushing introduced in v3.6
* Fix Xen-SWIOTLB not using proper DMA mask - device had 64bit but
in a 32-bit kernel we need to allocate for coherent pages from a
32-bit pool.
* When trying to re-use P2M nodes we had a one-off error and triggered
a BUG_ON check with specific CONFIG_ option.
* When doing FLR in Xen-PCI-backend we would first do FLR then save the
PCI configuration space. We needed to do it the other way around.
* tag 'stable/for-linus-3.6-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/pciback: Fix proper FLR steps.
xen: Use correct masking in xen_swiotlb_alloc_coherent.
xen: fix logical error in tlb flushing
xen/p2m: Fix one-off error in checking the P2M tree directory.
Power management
- PCI/PM: Enable D3/D3cold by default for most devices
- PCI/PM: Keep parent bridge active when probing device
- PCI/PM: Fix config reg access for D3cold and bridge suspending
- PCI/PM: Add ABI document for sysfs file d3cold_allowed
Core
- PCI: Don't print anything while decoding is disabled
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=zFNa
-----END PGP SIGNATURE-----
Merge tag '3.6-pci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Power management
- PCI/PM: Enable D3/D3cold by default for most devices
- PCI/PM: Keep parent bridge active when probing device
- PCI/PM: Fix config reg access for D3cold and bridge suspending
- PCI/PM: Add ABI document for sysfs file d3cold_allowed
Core
- PCI: Don't print anything while decoding is disabled"
* tag '3.6-pci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Don't print anything while decoding is disabled
PCI/PM: Add ABI document for sysfs file d3cold_allowed
PCI/PM: Fix config reg access for D3cold and bridge suspending
PCI/PM: Keep parent bridge active when probing device
PCI/PM: Enable D3/D3cold by default for most devices
Mostly Renesas and Atmel bugfixes this time, targeting boot and build
problems. A couple of patches for gemini and kirkwood as well. On a
whole nothing very controversial.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=hMrY
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC bug fixes from Olof Johansson:
"Mostly Renesas and Atmel bugfixes this time, targeting boot and build
problems. A couple of patches for gemini and kirkwood as well. On a
whole nothing very controversial."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: gemini: fix the gemini build
ARM: shmobile: armadillo800eva: enable rw rootfs mount
ARM: Kirkwood: Fix 'SZ_1M' undeclared here for db88f6281-bp-setup.c
ARM: shmobile: mackerel: fixup usb module order
ARM: shmobile: armadillo800eva: fixup: sound card detection order
ARM: shmobile: marzen: fixup smsc911x id for regulator
ARM: at91/feature-removal-schedule: delay at91_mci removal
ARM: mach-shmobile: armadillo800eva: Enable power button as wakeup source
ARM: mach-shmobile: armadillo800eva: Fix GPIO buttons descriptions
ARM: at91/dts: remove partial parameter in at91sam9g25ek.dts
ARM: at91/clock: fix PLLA overclock warning
ARM: at91: fix rtc-at91sam9 irq issue due to sparse irq support
ARM: at91: fix system timer irq issue due to sparse irq support
ARM: shmobile: sh73a0: fixup RELOC_BASE of intca_irq_pins_desc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=eZQ4
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull a hwmon fix from Guenter Roeck:
"One patch, fixing DIV_ROUND_CLOSEST to support negative dividends.
While the changes are not in the drivers/hwmon directory, the problem
primarily affects hwmon drivers, and it makes sense to push the patch
through the hwmon tree."
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
linux/kernel.h: Fix DIV_ROUND_CLOSEST to support negative dividends
Pull kbuild fixes from Michal Marek:
"These are two fixes that should go into 3.6. The link-vmlinux.sh one
is obvious.
The other one fixes make firmware_install with certain configurations,
where a file in the toplevel firmware tree gets installed first, and
$(INSTALL_FW_PATH)/$$(dir <file>) results in /lib/firmware/./, which
confuses make 3.82 for some reason."
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
firmware: fix directory creation rule matching with make 3.82
link-vmlinux.sh: Fix stray "echo" in error message
When we do FLR and save PCI config we did it in the wrong order.
The end result was that if a PCI device was unbind from
its driver, then binded to xen-pciback, and then back to its
driver we would get:
> lspci -s 04:00.0
04:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
13:42:12 # 4 :~/
> echo "0000:04:00.0" > /sys/bus/pci/drivers/pciback/unbind
> modprobe e1000e
e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0000:04:00.0: Disabling ASPM L0s L1
e1000e 0000:04:00.0: enabling device (0000 -> 0002)
xen: registering gsi 48 triggering 0 polarity 1
Already setup the GSI :48
e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e: probe of 0000:04:00.0 failed with error -2
This fixes it by first saving the PCI configuration space, then
doing the FLR.
Reported-by: Ren, Yongjie <yongjie.ren@intel.com>
Reported-and-Tested-by: Tobias Geiger <tobias.geiger@vido.info>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: stable@vger.kernel.org
- a firmware bug on several Samsung MoviNAND eMMC models causes
permanent corruption on the device when secure erase and secure trim
requests are made, so we disable those requests on these eMMC devices.
- atmel-mci: fix a hang with some SD cards by waiting for not-busy flag.
- dw_mmc: low-power mode breaks SDIO interrupts; fix PIO error handling;
fix handling of error interrupts.
- mxs-mmc: fix deadlocks; fix compile error due to dma.h arch change.
- omap: fix broken PIO mode causing memory corruption.
- sdhci-esdhc: fix card detection.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=n1hi
-----END PGP SIGNATURE-----
Merge tag 'mmc-fixes-for-3.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Pull MMC fixes from Chris Ball:
- a firmware bug on several Samsung MoviNAND eMMC models causes
permanent corruption on the device when secure erase and secure trim
requests are made, so we disable those requests on these eMMC devices.
- atmel-mci: fix a hang with some SD cards by waiting for not-busy flag.
- dw_mmc: low-power mode breaks SDIO interrupts; fix PIO error handling;
fix handling of error interrupts.
- mxs-mmc: fix deadlocks; fix compile error due to dma.h arch change.
- omap: fix broken PIO mode causing memory corruption.
- sdhci-esdhc: fix card detection.
* tag 'mmc-fixes-for-3.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
mmc: omap: fix broken PIO mode
mmc: card: Skip secure erase on MoviNAND; causes unrecoverable corruption.
mmc: dw_mmc: Disable low power mode if SDIO interrupts are used
mmc: dw_mmc: fix error handling in PIO mode
mmc: dw_mmc: correct mishandling error interrupt
mmc: dw_mmc: amend using error interrupt status
mmc: atmel-mci: not busy flag has also to be used for read operations
mmc: sdhci-esdhc: break out early if clock is 0
mmc: mxs-mmc: fix deadlock caused by recursion loop
mmc: mxs-mmc: fix deadlock in SDIO IRQ case
mmc: bfin_sdh: fix dma_desc_array build error
Fix the following compile error on UML.
arch/um/os-Linux/time.c: In function 'deliver_alarm':
arch/um/os-Linux/time.c:117:3: error: too few arguments to function 'alarm_handler'
arch/um/os-Linux/internal.h:1:6: note: declared here
The error was introduced by commit d3c1cfcd ("um: pass siginfo to guest
process") in 3.6-rc1.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: Martin Pärtel <martin.partel@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allocate a structure not a pointer to it !
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull powerpc fixes from Benjamin Herrenschmidt:
"Here are a few fixes for 3.6 that were piling up while I was away or
busy (I was mostly MIA a week or two before San Diego).
Some fixes from Anton fixing up issues with our relatively new DSCR
control feature, and a few other fixes that are either regressions or
bugs nasty enough to warrant not waiting."
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: Don't use __put_user() in patch_instruction
powerpc: Make sure IPI handlers see data written by IPI senders
powerpc: Restore correct DSCR in context switch
powerpc: Fix DSCR inheritance in copy_thread()
powerpc: Keep thread.dscr and thread.dscr_inherit in sync
powerpc: Update DSCR on all CPUs when writing sysfs dscr_default
powerpc/powernv: Always go into nap mode when CPU is offline
powerpc: Give hypervisor decrementer interrupts their own handler
powerpc/vphn: Fix arch_update_cpu_topology() return value
- Erroneous debug message from of_get_named_gpio_flags()
- Make sure the MC9S08DZ60 GPIO driver depend on I2C being
compiled in (not module) or allmodconfig breaks.
- Check return value from irq_alloc_descs() in the Emma
Mobile GPIO driver.
- Assign the owner field for the rdc321x driver so the
module won't be removed if it has active GPIOs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=QDOR
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"These are some GPIO regression fixes for v3.6:
- Erroneous debug message from of_get_named_gpio_flags()
- Make sure the MC9S08DZ60 GPIO driver depend on I2C being compiled
in (not module) or allmodconfig breaks.
- Check return value from irq_alloc_descs() in the Emma Mobile GPIO
driver.
- Assign the owner field for the rdc321x driver so the module won't
be removed if it has active GPIOs."
* tag 'gpio-fixes-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: rdc321x: Prevent removal of modules exporting active GPIOs
gpio: em: Fix checking return value of irq_alloc_descs
gpio: mc9s08dz60: Fix build error if I2C=m
gpio: Fix debug message in of_get_named_gpio_flags()
There are nothing scaring, contains only small fixes for HD-audio and
USB-audio:
- EPSS regression fix and GPIO fix for HD-audio IDT codecs
- A series of USB-audio regression fixes that are found since 3.5 kernel
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=AbfN
-----END PGP SIGNATURE-----
Merge tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"There are nothing scaring, contains only small fixes for HD-audio and
USB-audio:
- EPSS regression fix and GPIO fix for HD-audio IDT codecs
- A series of USB-audio regression fixes that are found since 3.5
kernel"
* tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: snd-usb: fix cross-interface streaming devices
ALSA: snd-usb: fix calls to next_packet_size
ALSA: snd-usb: restore delay information
ALSA: snd-usb: use list_for_each_safe for endpoint resources
ALSA: snd-usb: Fix URB cancellation at stream start
ALSA: hda - Don't trust codec EPSS bit for IDT 92HD83xx & co
ALSA: hda - Avoid unnecessary parameter read for EPSS
ALSA: hda - Do not set GPIOs for speakers on IDT if there are no speakers
- a fix by Paul Cercueil to prevent a possible buffer overflow
- a fix by Bruno Prémont to prevent a rare sleep in invalid context
- a fix by Julia Lawall for a double free in auo_k190x
- a fix by Dan Carpenter to prevent a division by zero in mb862xxfb
- a regression fix by Tomi Valkeinen for the SDI output in OMAP
- a fix by Grazvydas Ignotas to fix the console colors in OMAP
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.12 (GNU/Linux)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=8eFG
-----END PGP SIGNATURE-----
Merge tag 'fbdev-fixes-for-3.6-1' of git://github.com/schandinat/linux-2.6
Pull fbdev fixes from Florian Tobias Schandinat:
- a fix by Paul Cercueil to prevent a possible buffer overflow
- a fix by Bruno Prémont to prevent a rare sleep in invalid context
- a fix by Julia Lawall for a double free in auo_k190x
- a fix by Dan Carpenter to prevent a division by zero in mb862xxfb
- a regression fix by Tomi Valkeinen for the SDI output in OMAP
- a fix by Grazvydas Ignotas to fix the console colors in OMAP
* tag 'fbdev-fixes-for-3.6-1' of git://github.com/schandinat/linux-2.6:
OMAPFB: fix framebuffer console colors
OMAPDSS: Fix SDI PLL locking
video: mb862xxfb: prevent divide by zero bug
drivers/video/auo_k190x.c: drop kfree of devm_kzalloc's data
fbcon: Fix bit_putcs() call to kmalloc(s, GFP_KERNEL)
fbcon: prevent possible buffer overflow.
'kmem_cache_alloc()' but were freeing it using 'kfree()' in some cases.
Now we fix this by using 'kmem_cache_free()' instead.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=Bin1
-----END PGP SIGNATURE-----
Merge tag 'upstream-3.6-rc5' of git://git.infradead.org/linux-ubi
Pull ubi fix from Artem Bityutskiy:
"A single small fix for memory deallocation: we allocated memory using
'kmem_cache_alloc()' but were freeing it using 'kfree()' in some
cases. Now we fix this by using 'kmem_cache_free()' instead."
* tag 'upstream-3.6-rc5' of git://git.infradead.org/linux-ubi:
UBI: fix a horrible memory deallocation bug
Commit 644595f896 ("compat: Handle COMPAT_USE_64BIT_TIME in
net/socket.c") introduced a bug where the helper functions to take
either a 64-bit or compat time[spec|val] got the arguments in the wrong
order, passing the kernel stack pointer off as a user pointer (and vice
versa).
Because of the user address range check, that in turn then causes an
EFAULT due to the user pointer range checking failing for the kernel
address. Incorrectly resuling in a failed system call for 32-bit
processes with a 64-bit kernel.
On odder architectures like HP-PA (with separate user/kernel address
spaces), it can be used read kernel memory.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When running 32-bit pvops-dom0 and a driver tries to allocate a coherent
DMA-memory the xen swiotlb-implementation returned memory beyond 4GB.
The underlaying reason is that if the supplied driver passes in a
DMA_BIT_MASK(64) ( hwdev->coherent_dma_mask is set to 0xffffffffffffffff)
our dma_mask will be u64 set to 0xffffffffffffffff even if we set it to
DMA_BIT_MASK(32) previously. Meaning we do not reset the upper bits.
By using the dma_alloc_coherent_mask function - it does the proper casting
and we get 0xfffffffff.
This caused not working sound on a system with 4 GB and a 64-bit
compatible sound-card with sets the DMA-mask to 64bit.
On bare-metal and the forward-ported xen-dom0 patches from OpenSuse a coherent
DMA-memory is always allocated inside the 32-bit address-range by calling
dma_alloc_coherent_mask.
This patch adds the same functionality to xen swiotlb and is a rebase of the
original patch from Ronny Hegewald which never got upstream b/c the
underlaying reason was not understood until now.
The original email with the original patch is in:
http://old-list-archives.xen.org/archives/html/xen-devel/2010-02/msg00038.html
the original thread from where the discussion started is in:
http://old-list-archives.xen.org/archives/html/xen-devel/2010-01/msg00928.html
Signed-off-by: Ronny Hegewald <ronny.hegewald@online.de>
Signed-off-by: Stefano Panella <stefano.panella@citrix.com>
Acked-By: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: stable@vger.kernel.org
