2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 04:34:11 +08:00
Commit Graph

218 Commits

Author SHA1 Message Date
Fabio Estevam
4a5bddf7ea fec: Let device core handle pinctrl
Since commit ab78029 (drivers/pinctrl: grab default handles from device core)
we can rely on device core for handling pinctrl, so remove
devm_pinctrl_get_select_default() from the driver.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-20 13:44:32 -07:00
Shawn Guo
4849625569 net: fec: enable hardware checksum only on imx6q-fec
Commit 4c09eed (net: fec: Enable imx6 enet checksum acceleration.)
enables hardware checksum acceleration unconditionally for all fec
variants.  This is inappropriate, because some variants like imx5 have
no such support on hardware.  Consequently, fec is broken on these
platforms.  Fix it by enabling hardware checksum only on imx6q-fec type
of controllers.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Jim Baxter <jim_baxter@mentor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-11 16:12:44 -07:00
Frank Li
54309fa60b net: fec: fix kernel oops when plug/unplug cable many times
reproduce steps
 1. flood ping from other machine
 	ping -f -s 41000 IP
 2. run below script
    while [ 1 ]; do ethtool -s eth0 autoneg off;
    sleep 3;ethtool -s eth0 autoneg on; sleep 4; done;

You can see oops in one hour.

The reason is fec_restart clear BD but NAPI may use it.
The solution is disable NAPI and stop xmit when reset BD.
disable NAPI may sleep, so fec_restart can't be call in
atomic context.

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-08 13:13:30 -07:00
Linus Torvalds
38f56f33ca ARM: arm-soc device tree changes, part 2
These are mostly new device tree bindings for existing drivers, as well
 as changes to the device tree source files to add support for those
 devices, and a couple of new boards, most notably Samsung's Exynos5
 based Chromebook.
 
 The changes depend on earlier platform specific updates and touch
 the usual platforms: omap, exynos, tegra, mxs, mvebu and davinci.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUYgjh2CrR//JCVInAQJTvRAAmxaeoI+kQ/pbbRDa/Mnhf+bUmQjvJvx4
 uFGYAAi23Txem2Bx6xrfvOo9//ATYSfRxenoSSOtXQucsnrqD0+837Sj2NbO6AB9
 MSiFDK4usJtGwSUybkSHNLb2QPBr8XTgmyWVE/sHEw2UtrIToC1n3sxFofFm0guT
 ReILKsgK0Wjyq5RntnjWOCHNNp6OGqDGvFXlSJqNA7Z6gR/VZy4o0oXS4Sv3TWgF
 zG7ngSG7/u9FP1IQnMr/SxY1T4QS/bBbAC1YvD/7X30DPHrWKR3/3LfLcsc9TUN2
 smTlZQjHdgBbGfVPL7JN0fQwA82HEjNSZKLJ0w9uFjxXgnoKT3znpUpQeuf3dsWm
 BhEFqN1Rf446S4ft2btBSB2nhX4NTlJ7w6z2F65xgaylgYFsGFTYcpjiOurKe3wF
 gGsw31DZdcuI4/LjiWbNGRKbMd7HFFLbFDMJ16TFbNcNr+pM3qpoQ6z3uMbfCBSe
 xFnYr+ESN8F2HXMNLiz3CTqLY+Fi/bHd22n3KuI9qsWws/0KDUrTvFh9Sm3kYji5
 QwwLl6PRoeFw8H29e3KrPsKoY/BGYAvrAetnC1o79cDFPLwUyii/1B6WwzC4ynfs
 K1VhwdVOwnp0sS/a2Pv8sZBpDNI07gwT9P20aiholxgREq2RKNXXVxGGFfK5Qvm9
 FG4Vp6EKEQ0=
 =G60S
 -----END PGP SIGNATURE-----

Merge tag 'dt-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree updates (part 2) from Arnd Bergmann:
 "These are mostly new device tree bindings for existing drivers, as
  well as changes to the device tree source files to add support for
  those devices, and a couple of new boards, most notably Samsung's
  Exynos5 based Chromebook.

  The changes depend on earlier platform specific updates and touch the
  usual platforms: omap, exynos, tegra, mxs, mvebu and davinci."

* tag 'dt-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits)
  ARM: exynos: dts: cros5250: add EC device
  ARM: dts: Add sbs-battery for exynos5250-snow
  ARM: dts: Add i2c-arbitrator bus for exynos5250-snow
  ARM: dts: add mshc controller node for Exynos4x12 SoCs
  ARM: dts: Add chip-id controller node on Exynos4/5 SoC
  ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device tree
  ARM: davinci: da850-evm: add SPI flash support
  ARM: davinci: da850: override SPI DT node device name
  ARM: davinci: da850: add SPI1 DT node
  spi/davinci: add DT binding documentation
  spi/davinci: no wildcards in DT compatible property
  ARM: dts: mvebu: Convert mvebu device tree files to 64 bits
  ARM: dts: mvebu: introduce internal-regs node
  ARM: dts: mvebu: Convert all the mvebu files to use the range property
  ARM: dts: mvebu: move all peripherals inside soc
  ARM: dts: mvebu: fix cpus section indentation
  ARM: davinci: da850: add EHRPWM & ECAP DT node
  ARM/dts: OMAP3: fix pinctrl-single configuration
  ARM: dts: Add OMAP3430 SDP NOR flash memory binding
  ARM: dts: Add NOR flash bindings for OMAP2420 H4
  ...
2013-05-07 11:06:17 -07:00
Arnd Bergmann
4183bef2e0 Merge branch 'late/dt' into next/dt2
This is support for the ARM Chromebook, originally scheduled
as a "late" pull request. Since it's already late now, we
can combine this into the existing next/dt2 branch.

* late/dt:
  ARM: exynos: dts: cros5250: add EC device
  ARM: dts: Add sbs-battery for exynos5250-snow
  ARM: dts: Add i2c-arbitrator bus for exynos5250-snow
  ARM: dts: Add chip-id controller node on Exynos4/5 SoC
  ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device tree
2013-05-06 23:38:00 +02:00
David S. Miller
58717686cf Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
	drivers/net/ethernet/emulex/benet/be.h
	include/net/tcp.h
	net/mac802154/mac802154.h

Most conflicts were minor overlapping stuff.

The be2net driver brought in some fixes that added __vlan_put_tag
calls, which in net-next take an additional argument.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30 03:55:20 -04:00
Jim Baxter
4c09eed9dc net: fec: Enable imx6 enet checksum acceleration.
Enables hardware generation of IP header and
protocol specific checksums for transmitted
packets.

Enabled hardware discarding of received packets with
invalid IP header or protocol specific checksums.

The feature is enabled by default but can be
enabled/disabled by ethtool.

Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Jim Baxter <jim_baxter@mentor.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-25 03:58:26 -04:00
Richard Cochran
cd4baaaa04 gianfar: do not advertise any alarm capability.
An early draft of the PHC patch series included an alarm in the
gianfar driver. During the review process, the alarm code was dropped,
but the capability removal was overlooked. This patch fixes the issue
by advertising zero alarms.

This patch should be applied to every 3.x stable kernel.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Reported-by: Chris LaRocque <clarocq@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-25 01:46:00 -04:00
David S. Miller
6e0895c2ea Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/emulex/benet/be_main.c
	drivers/net/ethernet/intel/igb/igb_main.c
	drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
	include/net/scm.h
	net/batman-adv/routing.c
	net/ipv4/tcp_input.c

The e{uid,gid} --> {uid,gid} credentials fix conflicted with the
cleanup in net-next to now pass cred structs around.

The be2net driver had a bug fix in 'net' that overlapped with the VLAN
interface changes by Patrick McHardy in net-next.

An IGB conflict existed because in 'net' the build_skb() support was
reverted, and in 'net-next' there was a comment style fix within that
code.

Several batman-adv conflicts were resolved by making sure that all
calls to batadv_is_my_mac() are changed to have a new bat_priv first
argument.

Eric Dumazet's TS ECR fix in TCP in 'net' conflicted with the F-RTO
rewrite in 'net-next', mostly overlapping changes.

Thanks to Stephen Rothwell and Antonio Quartulli for help with several
of these merge resolutions.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-22 20:32:51 -04:00
David S. Miller
e5905c8352 net: Fix some __vlan_hwaccel_put_tag() callers.
Several call sites were missed when the protocol argument was added to
__vlan_hwaccel_put_tag() in commit
86a9bad3ab ("net: vlan: add protocol
argument to packet tagging functions").

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-22 19:24:19 -04:00
Patrick McHardy
f646968f8f net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*
Rename the hardware VLAN acceleration features to include "CTAG" to indicate
that they only support CTAGs. Follow up patches will introduce 802.1ad
server provider tagging (STAGs) and require the distinction for hardware not
supporting acclerating both.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 14:45:26 -04:00
Fabio Estevam
5a5967d804 fec: Remove unneeded asm header files
There is nothing in the driver that requires <asm/coldfire.h> and
<asm/mcfsim.h>.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 14:56:23 -04:00
Lucas Stach
8d7ed0f051 net: fec: fix regression in link change accounting
A link-down isn't properly saved in the FEC state, so we wouldn't restart the
FEC after a repeated link-up.

Regression was introduced with commit
d97e7497 "net: fec: restart the FEC when PHY speed changes"

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-16 16:47:43 -04:00
Fabio Estevam
bf7bfd7ff0 fec: Use SIMPLE_DEV_PM_OPS
Using SIMPLE_DEV_PM_OPS can make the code smaller and simpler.

Also change CONFIG_PM to CONFIG_PM_SLEEP.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-16 16:43:35 -04:00
Joe Perches
c84d8055e0 ucc_geth: Convert ugeth_<level> to pr_<level>
Remove unnecessary macros that duplicate generic
kernel functions.

When a struct net_device is available:

Convert printks to netdev_<level>
Convert netif_msg_<foo> and ugeth_<level> to netif_<level>

Add pr_fmt.  Standardize on newlines at end of format.
Remove some duplicated newlines from output.
Coalesce formats.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-14 15:41:49 -04:00
Joe Perches
375d6a1b42 gianfar: Use netdev_<level> when possible
Use a more current logging style.

Convert pr_<level> to netdev_<level> when a struct net_device is
available.  Add pr_fmt and neaten other formats too.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-14 15:41:49 -04:00
Joe Perches
31b7720c82 fec: Convert printks to netdev_<level>
Use a more current logging message style.

Convert the printks where a struct net_device is available to
netdev_<level>.  Convert the other printks to pr_<level> and
add pr_fmt where appropriate.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-14 15:41:49 -04:00
Fabio Estevam
eb1d064058 fec: Fix PHC device log
Currently when booting a mx6 device we get the following on boot:

registered PHC device on eth%d

Fix it by printing the network device name only after it gets registered, so
that the following can be read now:

fec 2188000.ethernet eth0: registered PHC device 0

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-13 16:51:07 -04:00
Jingchang Lu
ca7c4a45d1 ethernet/fec: Add Vybrid family fec support
Freescale Vybrid platform implentments MAC-ENET core
providing compatibility with half- or full-duplex
10/100 Mbit/s Ethernet LANs.

Signed-off-by: Jingchang Lu <b35083@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-12 18:25:36 -04:00
Wolfram Sang
daa7d392ff net: freescale: fec: add support for optional enet_out clk
Some MX28 boards need the internal enet_out clock to be enabled. So, do
this in the driver iff the clock was referenced via devicetree.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: David S. Miller <davem@davemloft.net>
2013-04-04 21:22:40 +08:00
Shawn Guo
c29dc2d771 net: fec: handle optional clk_ptp more gracefully
When the optional clk_ptp is absent, we can just set it to NULL, and
clk API will just handle it gracefully.  It saves us from checking
clk_ptp whenever calling into clk API.

Also since clk_ptp is optional, the "ret" variable shouldn't be set
in case that the clock is absent.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: David S. Miller <davem@davemloft.net>
2013-04-04 21:22:39 +08:00
Guenter Roeck
6c5f7808ef net/freescale/fec: Simplify OF dependencies
Since of_get_mac_address() is now defined even if CONFIG_OF_NET
is not configured, the ifdef around the code calling it is no longer
necessary and can be removed.

Similar, since of_get_phy_mode() is now defined as dummy function
if OF_NET is not configured, it is no longer necessary to provide
an OF dependent function as front-end. Also, the function depends
on OF_NET, not on OF, so the conditional code was not correct anyway.
Drop the front-end function and call of_get_phy_mode() directly.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-02 16:43:56 -04:00
David S. Miller
a210576cf8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	net/mac80211/sta_info.c
	net/wireless/core.h

Two minor conflicts in wireless.  Overlapping additions of extern
declarations in net/wireless/core.h and a bug fix overlapping with
the addition of a boolean parameter to __ieee80211_key_free().

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-01 13:36:50 -04:00
Frank Li
14109a59ca enet: fec: fix fail resume from suspend state
Without this patch
1. boot with nfs (no_console_suspend)
2. echo mem >/sys/power/state
3. wakeup by wakesource
4. print "eth0: tx queue full"

This fix above problem by reinit bd queue at restart function

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-27 14:06:40 -04:00
Jim Baxter
96d2222bf1 net: fec: TX Buffer incorrectly initialized
The TX Buffer in fec_enet_alloc_buffers was being initialized
with the receive register define BD_ENET_RX_INT instead of
the transmit register define BD_ENET_TX_INT

Signed-off-by: Jim Baxter <jim_baxter@mentor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26 12:55:14 -04:00
Frank Li
793fc0964b net: fec: build fec.c and fec_ptp.c to one module
fec_ptp.ko can't run individually
rename fec.c to fec_main.c
Build fec.o and fec_ptp.o into one fec.ko
Remove unnessary EXPORT_SYMBOL in fec_ptp

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-25 12:14:57 -04:00
David S. Miller
ea3d1cc285 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull to get the thermal netlink multicast group name fix, otherwise
the assertion added in net-next to netlink to detect that kind of bug
makes systems unbootable for some folks.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-22 12:53:09 -04:00
Claudiu Manoil
953d276847 gianfar: Remove superfluous kernel_dropped local counter
The GRO_DROP return code is handled by the core network layer.
The current kernel approach is to factorize this kind of statistics into
the upper layers, instead of having all the drivers maintaining them.

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21 12:01:34 -04:00
Claudiu Manoil
c6e1160ed6 gianfar: Cleanup dead code and minor formatting
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21 12:01:34 -04:00
Claudiu Manoil
39c0a0d5be gianfar: Remove 'maybe-uninitialized' compile warning
Warning message:
warning: 'budget_per_q' may be used uninitialized in this function

budget_per_q won't be used uninitialized since the only time
it doesn't get initialized is when entering gfar_poll with
num_act_queues == 0, meaning rstat_rxf == 0, in which case
budget_per_q is not utilized (as it has no meaning).
Inititalize budget_per_q to 0 though to suppress this compile
warning.

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21 12:01:34 -04:00
Fabio Estevam
9d73adf431 fec: Fix the build as module
Since commit ff43da86c6 (NET: FEC: dynamtic check DMA desc buff type) the
following build error happens when CONFIG_FEC=m

ERROR: "fec_ptp_init" [drivers/net/ethernet/freescale/fec.ko] undefined!
ERROR: "fec_ptp_ioctl" [drivers/net/ethernet/freescale/fec.ko] undefined!
ERROR: "fec_ptp_start_cyclecounter" [drivers/net/ethernet/freescale/fec.ko] undefined!

Fix it by exporting the required fec_ptp symbols.

Reported-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 14:45:30 -04:00
Wei Yongjun
47a5247fdd net: fec: make local function fec_poll_controller() static
fec_poll_controller() was not declared. It should be static.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:25:37 -04:00
Claudiu Manoil
800c644bcd gianfar: Refactor config coalescing calls for all queues
The only place where gfar_configure_coalescing is called
with an actual bitmask (other than 0xff) is in gfar_poll
(on the hot path). So make gfar_configure_coalescing()
static for the buffer processing path, and export
gfar_configure_coalescing_all() for the remaining cases
that require to set coalescing for all the queues at once
(on the slow path).

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:21:53 -04:00
Claudiu Manoil
5d9657d83a gianfar: Remove redundant programming of [rt]xic registers
For Multi Q Multi Group (MQ_MG_MODE) mode, the Rx/Tx colescing registers [rt]xic
are aliased with the [rt]xic0 registers (coalescing setting regs for Q0). This
avoids programming twice in a row the coalescing registers for the Rx/Tx hw Q0.

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:21:52 -04:00
Claudiu Manoil
6be5ed3fef gianfar: Poll only active Rx queues
Split the napi budget fairly among the active queues only, instead
of dividing it by the total number of Rx queues assigned to the
given interrupt group.
Use the h/w indication field RXFi in rstat (receive status register)
to identify the active rx queues from the current interrupt group
(i.e. receive event occured on ring i, if ring i is part of the current
interrupt group). This indication field in rstat, RXFi i=0..7,
allows us to find out on which queues of the same interrupt group
do we have incomming traffic once we entered the polling routine for
the given interrupt group. After servicing the ring i, the corresponding
bit RXFi will be written with 1 to clear the active queue indication for
that ring.

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:21:52 -04:00
Claudiu Manoil
c233cf4074 gianfar: Fix tx napi polling
There are 2 issues with the current napi poll routine, with regards
to tx ring cleanup:
1) for multi-queue devices (MQ_MG_MODE), should tx_bit_map != rx_bit_map,
which is possible (and supported in h/w) if the DT property "fsl,tx-bit-map"
holds a different value than rx_bit_map, the current polling routine will
service the wrong Tx queues in this case (i.e. the interrupt group will
receive interrupts from tx queues that it will not service)
2) Tx cleanup completion consumes napi budget, whereas the napi budget
should be reserved for Rx work only.

The patch fixes these issues and provides a clean napi polling routine.
Napi poll completion is reached when all the Rx queues have been
serviced and there is no Tx work to do.

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:21:52 -04:00
David S. Miller
61816596d1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull in the 'net' tree to get Daniel Borkmann's flow dissector
infrastructure change.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 12:46:26 -04:00
Fabio Estevam
da2191e314 net: fec: Define indexes as 'unsigned int'
Fix the following warnings that happen when building with W=1 option:

drivers/net/ethernet/freescale/fec.c: In function 'fec_enet_free_buffers':
drivers/net/ethernet/freescale/fec.c:1337:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/net/ethernet/freescale/fec.c: In function 'fec_enet_alloc_buffers':
drivers/net/ethernet/freescale/fec.c:1361:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/net/ethernet/freescale/fec.c: In function 'fec_enet_init':
drivers/net/ethernet/freescale/fec.c:1631:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 12:28:59 -04:00
Joe Perches
d0320f7500 drivers:net: Remove dma_alloc_coherent OOM messages
I believe these error messages are already logged
on allocation failure by warn_alloc_failed and so
get a dump_stack on OOM.

Remove the unnecessary additional error logging.

Around these deletions:

o Alignment neatening.
o Remove unnecessary casts of dma_alloc_coherent.
o Hoist assigns from ifs.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15 08:56:58 -04:00
Georg Hofmann
3f104c3825 net: fec: fix missing napi_disable call
Commit dc975382d2 introduces napi support
but never calls napi_disable. This will generate a kernel oops
(kernel BUG at include/linux/netdevice.h:473!) every time, when
ndo_stop is called followed by ndo_start.
Add the missing napi_diable call.

Signed-off-by: Georg Hofmann <georg@hofmannsweb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15 08:46:49 -04:00
Lucas Stach
d97e749769 net: fec: restart the FEC when PHY speed changes
Proviously we would only restart the FEC when PHY link or duplex state
changed. PHY does not always bring down the link for speed changes, in
which case we would not detect any change and keep FEC running.

Switching link speed without restarting the FEC results in the FEC being
stuck in an indefinite state, generating error conditions for every
packet.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15 08:46:48 -04:00
Fabio Estevam
83e519b634 fec: Use devm_request_and_ioremap()
Using devm_request_and_ioremap() can make the code cleaner and simpler.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12 08:04:09 -04:00
Fabio Estevam
a2e4b59a71 fec: Remove unused pci header
PCI header is not needed, so get rid of it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12 08:04:09 -04:00
Joe Perches
720a43efd3 drivers:net: Remove unnecessary OOM messages after netdev_alloc_skb
Emitting netdev_alloc_skb and netdev_alloc_skb_ip_align OOM
messages is unnecessary as there is already a dump_stack
after allocation failures.

Other trivial changes around these removals:

Convert a few comparisons of pointer to 0 to !pointer.
Change flow to remove unnecessary label.
Remove now unused variable.
Hoist assignment from if.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-09 16:09:19 -05:00
Frank Li
acac8406cd net: fec: fix build error in no MXC platform
build error cause by
Commit ff43da86c6
("NET: FEC: dynamtic check DMA desc buff type")

drivers/net/ethernet/freescale/fec.c: In function ‘fec_enet_get_nextdesc’:
drivers/net/ethernet/freescale/fec.c:215:18: error: invalid use of undefined type ‘struct bufdesc_ex’
drivers/net/ethernet/freescale/fec.c: In function ‘fec_enet_get_prevdesc’:
drivers/net/ethernet/freescale/fec.c:224:18: error: invalid use of undefined type ‘struct bufdesc_ex’
drivers/net/ethernet/freescale/fec.c: In function ‘fec_enet_start_xmit’:
drivers/net/ethernet/freescale/fec.c:286:37: error: arithmetic on pointer to an incomplete type
drivers/net/ethernet/freescale/fec.c:287:13: error: arithmetic on pointer to an incomplete type
drivers/net/ethernet/freescale/fec.c:324:7: error: dereferencing pointer to incomplete type etc....

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-04 14:12:07 -05:00
Frank Li
de5fb0a053 net: fec: put tx to napi poll function to fix dead lock
up stack ndo_start_xmit already hold lock.
fec_enet_start_xmit needn't spin lock.
stat_xmit just update fep->cur_tx
fec_enet_tx just update fep->dirty_tx

Reserve a empty bdb to check full or empty
cur_tx == dirty_tx    means full
cur_tx == dirty_tx +1 means empty

So needn't is_full variable.

Fix spin lock deadlock

=================================
[ INFO: inconsistent lock state ]
3.8.0-rc5+ #107 Not tainted
---------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
ptp4l/615 [HC1[1]:SC0[0]:HE0:SE1] takes:
 (&(&list->lock)->rlock#3){?.-...}, at: [<8042c3c4>] skb_queue_tail+0x20/0x50
 {HARDIRQ-ON-W} state was registered at:
 [<80067250>] mark_lock+0x154/0x4e8
 [<800676f4>] mark_irqflags+0x110/0x1a4
 [<80069208>] __lock_acquire+0x494/0x9c0
 [<80069ce8>] lock_acquire+0x90/0xa4
 [<80527ad0>] _raw_spin_lock_bh+0x44/0x54
 [<804877e0>] first_packet_length+0x38/0x1f0
 [<804879e4>] udp_poll+0x4c/0x5c
 [<804231f8>] sock_poll+0x24/0x28
 [<800d27f0>] do_poll.isra.10+0x120/0x254
 [<800d36e4>] do_sys_poll+0x15c/0x1e8
 [<800d3828>] sys_poll+0x60/0xc8
 [<8000e780>] ret_fast_syscall+0x0/0x3c

 *** DEADLOCK ***

 1 lock held by ptp4l/615:
  #0:  (&(&fep->hw_lock)->rlock){-.-...}, at: [<80355f9c>] fec_enet_tx+0x24/0x268
  stack backtrace:
  Backtrace:
  [<800121e0>] (dump_backtrace+0x0/0x10c) from [<80516210>] (dump_stack+0x18/0x1c)
  r6:8063b1fc r5:bf38b2f8 r4:bf38b000 r3:bf38b000
  [<805161f8>] (dump_stack+0x0/0x1c) from [<805189d0>] (print_usage_bug.part.34+0x164/0x1a4)
  [<8051886c>] (print_usage_bug.part.34+0x0/0x1a4) from [<80518a88>] (print_usage_bug+0x78/0x88)
  r8:80065664 r7:bf38b2f8 r6:00000002 r5:00000000 r4:bf38b000
  [<80518a10>] (print_usage_bug+0x0/0x88) from [<80518b58>] (mark_lock_irq+0xc0/0x270)
  r7:bf38b000 r6:00000002 r5:bf38b2f8 r4:00000000
  [<80518a98>] (mark_lock_irq+0x0/0x270) from [<80067270>] (mark_lock+0x174/0x4e8)
  [<800670fc>] (mark_lock+0x0/0x4e8) from [<80067744>] (mark_irqflags+0x160/0x1a4)
  [<800675e4>] (mark_irqflags+0x0/0x1a4) from [<80069208>] (__lock_acquire+0x494/0x9c0)
  r5:00000002 r4:bf38b2f8
  [<80068d74>] (__lock_acquire+0x0/0x9c0) from [<80069ce8>] (lock_acquire+0x90/0xa4)
  [<80069c58>] (lock_acquire+0x0/0xa4) from [<805278d8>] (_raw_spin_lock_irqsave+0x4c/0x60)
  [<8052788c>] (_raw_spin_lock_irqsave+0x0/0x60) from [<8042c3c4>] (skb_queue_tail+0x20/0x50)
  r6:bfbb2180 r5:bf1d0190 r4:bf1d0184
  [<8042c3a4>] (skb_queue_tail+0x0/0x50) from [<8042c4cc>] (sock_queue_err_skb+0xd8/0x188)
  r6:00000056 r5:bfbb2180 r4:bf1d0000 r3:00000000
  [<8042c3f4>] (sock_queue_err_skb+0x0/0x188) from [<8042d15c>] (skb_tstamp_tx+0x70/0xa0)
  r6:bf0dddb0 r5:bf1d0000 r4:bfbb2180 r3:00000004
  [<8042d0ec>] (skb_tstamp_tx+0x0/0xa0) from [<803561d0>] (fec_enet_tx+0x258/0x268)
  r6:c089d260 r5:00001c00 r4:bfbd0000
  [<80355f78>] (fec_enet_tx+0x0/0x268) from [<803562cc>] (fec_enet_interrupt+0xec/0xf8)
  [<803561e0>] (fec_enet_interrupt+0x0/0xf8) from [<8007d5b0>] (handle_irq_event_percpu+0x54/0x1a0)
  [<8007d55c>] (handle_irq_event_percpu+0x0/0x1a0) from [<8007d740>] (handle_irq_event+0x44/0x64)
  [<8007d6fc>] (handle_irq_event+0x0/0x64) from [<80080690>] (handle_fasteoi_irq+0xc4/0x15c)
  r6:bf0dc000 r5:bf811290 r4:bf811240 r3:00000000
  [<800805cc>] (handle_fasteoi_irq+0x0/0x15c) from [<8007ceec>] (generic_handle_irq+0x28/0x38)
  r5:807130c8 r4:00000096
  [<8007cec4>] (generic_handle_irq+0x0/0x38) from [<8000f16c>] (handle_IRQ+0x54/0xb4)
  r4:8071d280 r3:00000180
  [<8000f118>] (handle_IRQ+0x0/0xb4) from [<80008544>] (gic_handle_irq+0x30/0x64)
  r8:8000e924 r7:f4000100 r6:bf0ddef8 r5:8071c974 r4:f400010c
  r3:00000000
  [<80008514>] (gic_handle_irq+0x0/0x64) from [<8000e2e4>] (__irq_svc+0x44/0x5c)
  Exception stack(0xbf0ddef8 to 0xbf0ddf40)

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-04 14:12:07 -05:00
Linus Torvalds
1cef9350cb Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) ping_err() ICMP error handler looks at wrong ICMP header, from Li
    Wei.

 2) TCP socket hash function on ipv6 is too weak, from Eric Dumazet.

 3) netif_set_xps_queue() forgets to drop mutex on errors, fix from
    Alexander Duyck.

 4) sum_frag_mem_limit() can deadlock due to lack of BH disabling, fix
    from Eric Dumazet.

 5) TCP SYN data is miscalculated in tcp_send_syn_data(), because the
    amount of TCP option space was not taken into account properly in
    this code path.  Fix from yuchung Cheng.

 6) MLX4 driver allocates device queues with the wrong size, from Kleber
    Sacilotto.

 7) sock_diag can access past the end of the sock_diag_handlers[] array,
    from Mathias Krause.

 8) vlan_set_encap_proto() makes incorrect assumptions about where
    skb->data points, rework the logic so that it works regardless of
    where skb->data happens to be.  From Jesse Gross.

 9) Fix gianfar build failure with NET_POLL enabled, from Paul
    Gortmaker.

10) Fix Ipv4 ID setting and checksum calculations in GRE driver, from
   Pravin B Shelar.

11) bgmac driver does:

        int i;

        for (i = 0; ...; ...) {
                ...
                for (i = 0; ...; ...) {

    effectively corrupting the outer loop index, use a seperate
    variable for the inner loops.  From Rafał Miłecki.

12) Fix suspend bugs in smsc95xx driver, from Ming Lei.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits)
  usbnet: smsc95xx: rename FEATURE_AUTOSUSPEND
  usbnet: smsc95xx: fix broken runtime suspend
  usbnet: smsc95xx: fix suspend failure
  bgmac: fix indexing of 2nd level loops
  b43: Fix lockdep splat on module unload
  Revert "ip_gre: propogate target device GSO capability to the tunnel device"
  IP_GRE: Fix GRE_CSUM case.
  VXLAN: Use tunnel_ip_select_ident() for tunnel IP-Identification.
  IP_GRE: Fix IP-Identification.
  net/pasemi: Fix missing coding style
  vmxnet3: fix ethtool ring buffer size setting
  vmxnet3: make local function static
  bnx2x: remove dead code and make local funcs static
  gianfar: fix compile fail for NET_POLL=y due to struct packing
  vlan: adjust vlan_set_encap_proto() for its callers
  sock_diag: Simplify sock_diag_handlers[] handling in __sock_diag_rcv_msg
  sock_diag: Fix out-of-bounds access to sock_diag_handlers[]
  vxlan: remove depends on CONFIG_EXPERIMENTAL
  mlx4_en: fix allocation of CPU affinity reverse-map
  mlx4_en: fix allocation of device tx_cq
  ...
2013-02-26 11:44:11 -08:00
Paul Gortmaker
62ed839dba gianfar: fix compile fail for NET_POLL=y due to struct packing
Commit ee873fda3b ("gianfar: Pack struct
gfar_priv_grp into three cachelines") moved the irq number and names
off into a separate struct and created accessors for them.  However
it was never tested with NET_POLL enabled, and so some conversions
that were simply overlooked went undetected until now.

Make the netpoll ones also use the gfar_irq() accessors.

Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Claudiu Manoil <claudiu.manoil@freescale.com>
Cc: Jianhua Xie <jianhua.xie@freescale.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-24 12:04:01 -05:00
Linus Torvalds
9d3cae26ac Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Benjamin Herrenschmidt:
 "So from the depth of frozen Minnesota, here's the powerpc pull request
  for 3.9.  It has a few interesting highlights, in addition to the
  usual bunch of bug fixes, minor updates, embedded device tree updates
  and new boards:

   - Hand tuned asm implementation of SHA1 (by Paulus & Michael
     Ellerman)

   - Support for Doorbell interrupts on Power8 (kind of fast
     thread-thread IPIs) by Ian Munsie

   - Long overdue cleanup of the way we handle relocation of our open
     firmware trampoline (prom_init.c) on 64-bit by Anton Blanchard

   - Support for saving/restoring & context switching the PPR (Processor
     Priority Register) on server processors that support it.  This
     allows the kernel to preserve thread priorities established by
     userspace.  By Haren Myneni.

   - DAWR (new watchpoint facility) support on Power8 by Michael Neuling

   - Ability to change the DSCR (Data Stream Control Register) which
     controls cache prefetching on a running process via ptrace by
     Alexey Kardashevskiy

   - Support for context switching the TAR register on Power8 (new
     branch target register meant to be used by some new specific
     userspace perf event interrupt facility which is yet to be enabled)
     by Ian Munsie.

   - Improve preservation of the CFAR register (which captures the
     origin of a branch) on various exception conditions by Paulus.

   - Move the Bestcomm DMA driver from arch powerpc to drivers/dma where
     it belongs by Philippe De Muyter

   - Support for Transactional Memory on Power8 by Michael Neuling
     (based on original work by Matt Evans).  For those curious about
     the feature, the patch contains a pretty good description."

(See commit db8ff90702: "powerpc: Documentation for transactional
memory on powerpc" for the mentioned description added to the file
Documentation/powerpc/transactional_memory.txt)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (140 commits)
  powerpc/kexec: Disable hard IRQ before kexec
  powerpc/85xx: l2sram - Add compatible string for BSC9131 platform
  powerpc/85xx: bsc9131 - Correct typo in SDHC device node
  powerpc/e500/qemu-e500: enable coreint
  powerpc/mpic: allow coreint to be determined by MPIC version
  powerpc/fsl_pci: Store the pci ctlr device ptr in the pci ctlr struct
  powerpc/85xx: Board support for ppa8548
  powerpc/fsl: remove extraneous DIU platform functions
  arch/powerpc/platforms/85xx/p1022_ds.c: adjust duplicate test
  powerpc: Documentation for transactional memory on powerpc
  powerpc: Add transactional memory to pseries and ppc64 defconfigs
  powerpc: Add config option for transactional memory
  powerpc: Add transactional memory to POWER8 cpu features
  powerpc: Add new transactional memory state to the signal context
  powerpc: Hook in new transactional memory code
  powerpc: Routines for FP/VSX/VMX unavailable during a transaction
  powerpc: Add transactional memory unavaliable execption handler
  powerpc: Add reclaim and recheckpoint functions for context switching transactional memory processes
  powerpc: Add FP/VSX and VMX register load functions for transactional memory
  powerpc: Add helper functions for transactional memory context switching
  ...
2013-02-23 17:09:55 -08:00
Fabio Estevam
e2f8d555ec net: fec: Fix division by zero
commit 7f7d6c282 (net: fec: Ensure that initialization is done prior to
request_irq()) placed fec_ptp_init() into a point that ptp clock was not
available, which causes a division by zero in fec_ptp_start_cyclecounter():

[   17.895723] Division by zero in kernel.
[   17.899571] Backtrace:
[   17.902094] [<80012564>] (dump_backtrace+0x0/0x10c) from [<8056deec>]
(dump_stack+0x18/0x1c)
[   17.910539]  r6:bfba8500 r5:8075c950 r4:bfba8000 r3:bfbd0000
[   17.916284] [<8056ded4>] (dump_stack+0x0/0x1c) from [<80012688>]
(__div0+0x18/0x20)
[   17.923968] [<80012670>] (__div0+0x0/0x20) from [<802829c4>] (Ldiv0+0x8/0x10)
[   17.931140] [<80398534>] (fec_ptp_start_cyclecounter+0x0/0x110) from
[<80394f64>] (fec_restart+0x6c8/0x754)
[   17.940898] [<8039489c>] (fec_restart+0x0/0x754) from [<803969a0>]
(fec_enet_adjust_link+0xdc/0x108)
[   17.950046] [<803968c4>] (fec_enet_adjust_link+0x0/0x108) from [<80390bc4>]
(phy_state_machine+0x178/0x534)
...

Fix this by rearraging the code so that fec_ptp_init() is called only after
the clocks have been properly acquired.

Tested on both mx53 and mx6 platforms.

Reported-by: Jim Baxter <jim_baxter@mentor.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-22 15:10:19 -05:00