renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 03:33:59 +08:00
Code
930,160 Commits 41 Branches 2 Tags 3.4 GiB
490741ab1b
Commit Graph

45788 Commits

Author SHA1 Message Date
John Hubbard
eaf4d22a9e docs: mm/gup: pin_user_pages.rst: add a "case 5" 
Patch series "vhost, docs: convert to pin_user_pages(), new "case 5""

It recently became clear to me that there are some get_user_pages*()
callers that don't fit neatly into any of the four cases that are so far
listed in pin_user_pages.rst.  vhost.c is one of those.

Add a Case 5 to the documentation, and refer to that when converting
vhost.c.

Thanks to Jan Kara for helping me (again) in understanding the
interaction between get_user_pages() and page writeback [1].

This is based on today's mmotm, which has a nearby patch to
pin_user_pages.rst that rewords cases 3 and 4.

Note that I have only compile-tested the vhost.c patch, although that
does also include cross-compiling for a few other arches.  Any run-time
testing would be greatly appreciated.

[1] https://lore.kernel.org/r/20200529070343.GL14550@quack2.suse.cz

This patch (of 2):

There are four cases listed in pin_user_pages.rst.  These are intended
to help developers figure out whether to use get_user_pages*(), or
pin_user_pages*().  However, the four cases do not cover all the
situations.  For example, drivers/vhost/vhost.c has a "pin, write to
page, set page dirty, unpin" case.

Add a fifth case, to help explain that there is a general pattern that
requires pin_user_pages*() API calls.

[jhubbard@nvidia.com: v2]
  Link: http://lkml.kernel.org/r/20200601052633.853874-2-jhubbard@nvidia.com

Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: "Michael S . Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Link: http://lkml.kernel.org/r/20200529234309.484480-1-jhubbard@nvidia.com
Link: http://lkml.kernel.org/r/20200529234309.484480-2-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-06-08 11:05:57 -07:00
John Hubbard
a8f80f53fb mm/gup: update pin_user_pages.rst for "case 3" (mmu notifiers) 
Update case 3 so that it covers the use of mmu notifiers, for hardware
that does, or does not have replayable page faults.

Also, elaborate case 4 slightly, as it was quite cryptic.

Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: http://lkml.kernel.org/r/20200527194953.11130-1-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-06-08 11:05:56 -07:00
Guilherme G. Piccoli
60c958d8df panic: add sysctl to dump all CPUs backtraces on oops event 
Usually when the kernel reaches an oops condition, it's a point of no
return; in case not enough debug information is available in the kernel
splat, one of the last resorts would be to collect a kernel crash dump
and analyze it.  The problem with this approach is that in order to
collect the dump, a panic is required (to kexec-load the crash kernel).
When in an environment of multiple virtual machines, users may prefer to
try living with the oops, at least until being able to properly shutdown
their VMs / finish their important tasks.

This patch implements a way to collect a bit more debug details when an
oops event is reached, by printing all the CPUs backtraces through the
usage of NMIs (on architectures that support that).  The sysctl added
(and documented) here was called "oops_all_cpu_backtrace", and when set
will (as the name suggests) dump all CPUs backtraces.

Far from ideal, this may be the last option though for users that for
some reason cannot panic on oops.  Most of times oopses are clear enough
to indicate the kernel portion that must be investigated, but in virtual
environments it's possible to observe hypervisor/KVM issues that could
lead to oopses shown in other guests CPUs (like virtual APIC crashes).
This patch hence aims to help debug such complex issues without
resorting to kdump.

Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200327224116.21030-1-gpiccoli@canonical.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-06-08 11:05:56 -07:00
Guilherme G. Piccoli
0ec9dc9bcb kernel/hung_task.c: introduce sysctl to print all traces when a hung task is detected 
Commit 401c636a0e ("kernel/hung_task.c: show all hung tasks before
panic") introduced a change in that we started to show all CPUs
backtraces when a hung task is detected _and_ the sysctl/kernel
parameter "hung_task_panic" is set.  The idea is good, because usually
when observing deadlocks (that may lead to hung tasks), the culprit is
another task holding a lock and not necessarily the task detected as
hung.

The problem with this approach is that dumping backtraces is a slightly
expensive task, specially printing that on console (and specially in
many CPU machines, as servers commonly found nowadays).  So, users that
plan to collect a kdump to investigate the hung tasks and narrow down
the deadlock definitely don't need the CPUs backtrace on dmesg/console,
which will delay the panic and pollute the log (crash tool would easily
grab all CPUs traces with 'bt -a' command).

Also, there's the reciprocal scenario: some users may be interested in
seeing the CPUs backtraces but not have the system panic when a hung
task is detected.  The current approach hence is almost as embedding a
policy in the kernel, by forcing the CPUs backtraces' dump (only) on
hung_task_panic.

This patch decouples the panic event on hung task from the CPUs
backtraces dump, by creating (and documenting) a new sysctl called
"hung_task_all_cpu_backtrace", analog to the approach taken on soft/hard
lockups, that have both a panic and an "all_cpu_backtrace" sysctl to
allow individual control.  The new mechanism for dumping the CPUs
backtraces on hung task detection respects "hung_task_warnings" by not
dumping the traces in case there's no warnings left.

Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: http://lkml.kernel.org/r/20200327223646.20779-1-gpiccoli@canonical.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-06-08 11:05:56 -07:00
Guilherme G. Piccoli
f117955a22 kernel/watchdog.c: convert {soft/hard}lockup boot parameters to sysctl aliases 
After a recent change introduced by Vlastimil's series [0], kernel is
able now to handle sysctl parameters on kernel command line; also, the
series introduced a simple infrastructure to convert legacy boot
parameters (that duplicate sysctls) into sysctl aliases.

This patch converts the watchdog parameters softlockup_panic and
{hard,soft}lockup_all_cpu_backtrace to use the new alias infrastructure.
It fixes the documentation too, since the alias only accepts values 0 or
1, not the full range of integers.

We also took the opportunity here to improve the documentation of the
previously converted hung_task_panic (see the patch series [0]) and put
the alias table in alphabetical order.

[0] http://lkml.kernel.org/r/20200427180433.7029-1-vbabka@suse.cz

Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Link: http://lkml.kernel.org/r/20200507214624.21911-1-gpiccoli@canonical.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-06-08 11:05:56 -07:00
Vlastimil Babka
b467f3ef3c kernel/hung_task convert hung_task_panic boot parameter to sysctl 
We can now handle sysctl parameters on kernel command line and have
infrastructure to convert legacy command line options that duplicate
sysctl to become a sysctl alias.

This patch converts the hung_task_panic parameter.  Note that the sysctl
handler is more strict and allows only 0 and 1, while the legacy
parameter allowed any non-zero value.  But there is little reason anyone
would not be using 1.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Guilherme G . Piccoli" <gpiccoli@canonical.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Ivan Teterevkov <ivan.teterevkov@nutanix.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200427180433.7029-4-vbabka@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-06-08 11:05:56 -07:00
Vlastimil Babka
3db978d480 kernel/sysctl: support setting sysctl parameters from kernel command line 
Patch series "support setting sysctl parameters from kernel command line", v3.

This series adds support for something that seems like many people
always wanted but nobody added it yet, so here's the ability to set
sysctl parameters via kernel command line options in the form of
sysctl.vm.something=1

The important part is Patch 1.  The second, not so important part is an
attempt to clean up legacy one-off parameters that do the same thing as
a sysctl.  I don't want to remove them completely for compatibility
reasons, but with generic sysctl support the idea is to remove the
one-off param handlers and treat the parameters as aliases for the
sysctl variants.

I have identified several parameters that mention sysctl counterparts in
Documentation/admin-guide/kernel-parameters.txt but there might be more.
The conversion also has varying level of success:

 - numa_zonelist_order is converted in Patch 2 together with adding the
   necessary infrastructure. It's easy as it doesn't really do anything
   but warn on deprecated value these days.

 - hung_task_panic is converted in Patch 3, but there's a downside that
   now it only accepts 0 and 1, while previously it was any integer
   value

 - nmi_watchdog maps to two sysctls nmi_watchdog and hardlockup_panic,
   so there's no straighforward conversion possible

 - traceoff_on_warning is a flag without value and it would be required
   to handle that somehow in the conversion infractructure, which seems
   pointless for a single flag

This patch (of 5):

A recently proposed patch to add vm_swappiness command line parameter in
addition to existing sysctl [1] made me wonder why we don't have a
general support for passing sysctl parameters via command line.

Googling found only somebody else wondering the same [2], but I haven't
found any prior discussion with reasons why not to do this.

Settings the vm_swappiness issue aside (the underlying issue might be
solved in a different way), quick search of kernel-parameters.txt shows
there are already some that exist as both sysctl and kernel parameter -
hung_task_panic, nmi_watchdog, numa_zonelist_order, traceoff_on_warning.

A general mechanism would remove the need to add more of those one-offs
and might be handy in situations where configuration by e.g.
/etc/sysctl.d/ is impractical.

Hence, this patch adds a new parse_args() pass that looks for parameters
prefixed by 'sysctl.' and tries to interpret them as writes to the
corresponding sys/ files using an temporary in-kernel procfs mount.
This mechanism was suggested by Eric W.  Biederman [3], as it handles
all dynamically registered sysctl tables, even though we don't handle
modular sysctls.  Errors due to e.g.  invalid parameter name or value
are reported in the kernel log.

The processing is hooked right before the init process is loaded, as
some handlers might be more complicated than simple setters and might
need some subsystems to be initialized.  At the moment the init process
can be started and eventually execute a process writing to /proc/sys/
then it should be also fine to do that from the kernel.

Sysctls registered later on module load time are not set by this
mechanism - it's expected that in such scenarios, setting sysctl values
from userspace is practical enough.

[1] https://lore.kernel.org/r/BL0PR02MB560167492CA4094C91589930E9FC0@BL0PR02MB5601.namprd02.prod.outlook.com/
[2] https://unix.stackexchange.com/questions/558802/how-to-set-sysctl-using-kernel-command-line-parameter
[3] https://lore.kernel.org/r/87bloj2skm.fsf@x220.int.ebiederm.org/

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Ivan Teterevkov <ivan.teterevkov@nutanix.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: "Guilherme G . Piccoli" <gpiccoli@canonical.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Link: http://lkml.kernel.org/r/20200427180433.7029-1-vbabka@suse.cz
Link: http://lkml.kernel.org/r/20200427180433.7029-2-vbabka@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-06-08 11:05:56 -07:00
Rafael Aquini
db38d5c106 kernel: add panic_on_taint 
Analogously to the introduction of panic_on_warn, this patch introduces
a kernel option named panic_on_taint in order to provide a simple and
generic way to stop execution and catch a coredump when the kernel gets
tainted by any given flag.

This is useful for debugging sessions as it avoids having to rebuild the
kernel to explicitly add calls to panic() into the code sites that
introduce the taint flags of interest.

For instance, if one is interested in proceeding with a post-mortem
analysis at the point a given code path is hitting a bad page (i.e.
unaccount_page_cache_page(), or slab_bug()), a coredump can be collected
by rebooting the kernel with 'panic_on_taint=0x20' amended to the
command line.

Another, perhaps less frequent, use for this option would be as a means
for assuring a security policy case where only a subset of taints, or no
single taint (in paranoid mode), is allowed for the running system.  The
optional switch 'nousertaint' is handy in this particular scenario, as
it will avoid userspace induced crashes by writes to sysctl interface
/proc/sys/kernel/tainted causing false positive hits for such policies.

[akpm@linux-foundation.org: tweak kernel-parameters.txt wording]

Suggested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Bunk <bunk@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Link: http://lkml.kernel.org/r/20200515175502.146720-1-aquini@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-06-08 11:05:56 -07:00
Orson Zhai
ceabef7dd7 dynamic_debug: add an option to enable dynamic debug for modules only 
Instead of enabling dynamic debug globally with CONFIG_DYNAMIC_DEBUG,
CONFIG_DYNAMIC_DEBUG_CORE will only enable core function of dynamic
debug.  With the DYNAMIC_DEBUG_MODULE defined for any modules, dynamic
debug will be tied to them.

This is useful for people who only want to enable dynamic debug for
kernel modules without worrying about kernel image size and memory
consumption is increasing too much.

[orson.zhai@unisoc.com: v2]
  Link: http://lkml.kernel.org/r/1587408228-10861-1-git-send-email-orson.unisoc@gmail.com

Signed-off-by: Orson Zhai <orson.zhai@unisoc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Link: http://lkml.kernel.org/r/1586521984-5890-1-git-send-email-orson.unisoc@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-06-08 11:05:56 -07:00
Linus Torvalds
9aa900c809 Char/Misc driver patches for 5.8-rc1 
Here is the large set of char/misc driver patches for 5.8-rc1
 
 Included in here are:
 	- habanalabs driver updates, loads
 	- mhi bus driver updates
 	- extcon driver updates
 	- clk driver updates (approved by the clock maintainer)
 	- firmware driver updates
 	- fpga driver updates
 	- gnss driver updates
 	- coresight driver updates
 	- interconnect driver updates
 	- parport driver updates (it's still alive!)
 	- nvmem driver updates
 	- soundwire driver updates
 	- visorbus driver updates
 	- w1 driver updates
 	- various misc driver updates
 
 In short, loads of different driver subsystem updates along with the
 drivers as well.
 
 All have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzkHw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yldOwCgus/DgpnI1UL4z+NdBxJrAXtkPmgAn2sgTUea
 i5RblCmcVMqvHaGtYkY+
 =tScN
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the large set of char/misc driver patches for 5.8-rc1

  Included in here are:

   - habanalabs driver updates, loads

   - mhi bus driver updates

   - extcon driver updates

   - clk driver updates (approved by the clock maintainer)

   - firmware driver updates

   - fpga driver updates

   - gnss driver updates

   - coresight driver updates

   - interconnect driver updates

   - parport driver updates (it's still alive!)

   - nvmem driver updates

   - soundwire driver updates

   - visorbus driver updates

   - w1 driver updates

   - various misc driver updates

  In short, loads of different driver subsystem updates along with the
  drivers as well.

  All have been in linux-next for a while with no reported issues"

* tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits)
  habanalabs: correctly cast u64 to void*
  habanalabs: initialize variable to default value
  extcon: arizona: Fix runtime PM imbalance on error
  extcon: max14577: Add proper dt-compatible strings
  extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
  extcon: remove redundant assignment to variable idx
  w1: omap-hdq: print dev_err if irq flags are not cleared
  w1: omap-hdq: fix interrupt handling which did show spurious timeouts
  w1: omap-hdq: fix return value to be -1 if there is a timeout
  w1: omap-hdq: cleanup to add missing newline for some dev_dbg
  /dev/mem: Revoke mappings when a driver claims the region
  misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages()
  misc: xilinx-sdfec: cleanup return value in xsdfec_table_write()
  misc: xilinx-sdfec: improve get_user_pages_fast() error handling
  nvmem: qfprom: remove incorrect write support
  habanalabs: handle MMU cache invalidation timeout
  habanalabs: don't allow hard reset with open processes
  habanalabs: GAUDI does not support soft-reset
  habanalabs: add print for soft reset due to event
  habanalabs: improve MMU cache invalidation code
  ...
 2020-06-07 10:59:32 -07:00
Linus Torvalds
f558b8364e Driver core patches for 5.8-rc1 
Here is the set of driver core patches for 5.8-rc1.
 
 Not all that huge this release, just a number of small fixes and
 updates:
 	- software node fixes
 	- kobject now sends KOBJ_REMOVE when it is removed from sysfs,
 	  not when it is removed from memory (which could come much
 	  later)
 	- device link additions and fixes based on testing on more
 	  devices
 	- firmware core cleanups
 	- other minor changes, full details in the shortlog
 
 All have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzmXg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymaAQCfZZ9prH3AMLF7DIkG3vMw0njLXt0An2FxrKYU
 wetHRG4KL9vTkdz7+TqU
 =t5LE
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the set of driver core patches for 5.8-rc1.

  Not all that huge this release, just a number of small fixes and
  updates:

   - software node fixes

   - kobject now sends KOBJ_REMOVE when it is removed from sysfs, not
     when it is removed from memory (which could come much later)

   - device link additions and fixes based on testing on more devices

   - firmware core cleanups

   - other minor changes, full details in the shortlog

  All have been in linux-next for a while with no reported issues"

* tag 'driver-core-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (23 commits)
  driver core: Update device link status correctly for SYNC_STATE_ONLY links
  firmware_loader: change enum fw_opt to u32
  software node: implement software_node_unregister()
  kobject: send KOBJ_REMOVE uevent when the object is removed from sysfs
  driver core: Remove unnecessary is_fwnode_dev variable in device_add()
  drivers property: When no children in primary, try secondary
  driver core: platform: Fix spelling errors in platform.c
  driver core: Remove check in driver_deferred_probe_force_trigger()
  of: platform: Batch fwnode parsing when adding all top level devices
  driver core: fw_devlink: Add support for batching fwnode parsing
  driver core: Look for waiting consumers only for a fwnode's primary device
  driver core: Move code to the right part of the file
  Revert "Revert "driver core: Set fw_devlink to "permissive" behavior by default""
  drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a driver developer is foolish
  firmware_loader: move fw_fallback_config to a private kernel symbol namespace
  driver core: Add missing '\n' in log messages
  driver/base/soc: Use kobj_to_dev() API
  Add documentation on meaning of -EPROBE_DEFER
  driver core: platform: remove redundant assignment to variable ret
  debugfs: Use the correct style for SPDX License Identifier
  ...
 2020-06-07 10:53:36 -07:00
Linus Torvalds
80ef846e99 Staging/IIO driver patches for 5.8-rc1 
Here is the large set of staging and IIO driver changes for 5.8-rc1
 
 Nothing major, but a lot of new IIO drivers are included in here, along
 with other core iio cleanups and changes.
 
 On the staging driver front, again, nothing noticable.  No new deletions
 or additions, just a ton of tiny cleanups all over the tree done by a
 lot of different people.  Most coding style, but many actual real fixes
 and cleanups that are nice to see.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzoAQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ym9FwCgkW8WZJGnvHLjuuG8C01azCEh/KUAoJRji8jK
 4zCG8NxAPFsQ1QP2SZPq
 =jEyw
 -----END PGP SIGNATURE-----

Merge tag 'staging-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO driver updates from Greg KH:
 "Here is the large set of staging and IIO driver changes for 5.8-rc1

  Nothing major, but a lot of new IIO drivers are included in here,
  along with other core iio cleanups and changes.

  On the staging driver front, again, nothing noticable. No new
  deletions or additions, just a ton of tiny cleanups all over the tree
  done by a lot of different people. Most coding style, but many actual
  real fixes and cleanups that are nice to see.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (618 commits)
  staging: rtl8723bs: Use common packet header constants
  staging: sm750fb: Add names to proc_setBLANK args
  staging: most: usb: init return value in default path of switch/case expression
  staging: vchiq: Get rid of VCHIQ_SERVICE_OPENEND callback reason
  staging: vchiq: move vchiq_release_message() into vchiq
  staging: vchi: Get rid of C++ guards
  staging: vchi: Get rid of not implemented function declarations
  staging: vchi: Get rid of vchiq_status_to_vchi()
  staging: vchi: Get rid of vchi_service_set_option()
  staging: vchi: Merge vchi_msg_queue() into vchi_queue_kernel_message()
  staging: vchiq: Move copy callback handling into vchiq
  staging: vchi: Get rid of vchi_queue_user_message()
  staging: vchi: Get rid of vchi_service_destroy()
  staging: most: usb: use function sysfs_streq
  staging: most: usb: add missing put_device calls
  staging: most: usb: use correct error codes
  staging: most: usb: replace code to calculate array index
  staging: most: usb: don't use error path to exit function on success
  staging: most: usb: move allocation of URB out of critical section
  staging: most: usb: return 0 instead of variable
  ...
 2020-06-07 10:45:08 -07:00
Linus Torvalds
081096d98b TTY/Serial driver updates for 5.8-rc1 
Here is the tty and serial driver updates for 5.8-rc1
 
 Nothing huge at all, just a lot of little serial driver fixes, updates
 for new devices and features, and other small things.  Full details are
 in the shortlog.
 
 Note, you will get a conflict merging with your tree in the
 Documentation/devicetree/bindings/serial/rs485.yaml file, but it should
 be pretty obvious what to do.  If not, I'm sure Rob will clean it all up
 afterwards :)
 
 All of these have been in linux-next with no issues for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzpCg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylRxACgjGtOKPjahONL4lWd0F8ZYEcyw7sAn34woBCO
 BDUV3kolrRQ4OYNJWsHP
 =TvqG
 -----END PGP SIGNATURE-----

Merge tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here is the tty and serial driver updates for 5.8-rc1

  Nothing huge at all, just a lot of little serial driver fixes, updates
  for new devices and features, and other small things. Full details are
  in the shortlog.

  All of these have been in linux-next with no issues for a while"

* tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (67 commits)
  tty: serial: qcom_geni_serial: Add 51.2MHz frequency support
  tty: serial: imx: clear Ageing Timer Interrupt in handler
  serial: 8250_fintek: Add F81966 Support
  sc16is7xx: Add flag to activate IrDA mode
  dt-bindings: sc16is7xx: Add flag to activate IrDA mode
  serial: 8250: Support rs485 bus termination GPIO
  serial: 8520_port: Fix function param documentation
  dt-bindings: serial: Add binding for rs485 bus termination GPIO
  vt: keyboard: avoid signed integer overflow in k_ascii
  serial: 8250: Enable 16550A variants by default on non-x86
  tty: hvc_console, fix crashes on parallel open/close
  serial: imx: Initialize lock for non-registered console
  sc16is7xx: Read the LSR register for basic device presence check
  sc16is7xx: Allow sharing the IRQ line
  sc16is7xx: Use threaded IRQ
  sc16is7xx: Always use falling edge IRQ
  tty: n_gsm: Fix bogus i++ in gsm_data_kick
  tty: n_gsm: Remove unnecessary test in gsm_print_packet()
  serial: stm32: add no_console_suspend support
  tty: serial: fsl_lpuart: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
  ...
 2020-06-07 09:52:36 -07:00
Linus Torvalds
e611c0fe31 USB/PHY driver updates for 5.8-rc1 
Here are the large set of USB and PHY driver updates for 5.8-rc1.
 
 Nothing huge, just lots of little things:
 	- USB gadget fixes and additions all over the place
 	- new PHY drivers
 	- PHY driver fixes and updates
 	- XHCI driver updates
 	- musb driver updates
 	- more USB-serial driver ids added
 	- various USB quirks added
 	- thunderbolt minor updates and fixes
 	- typec updates and additions
 
 Full details are in the shortlog.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzqVA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynftwCfeanyI6TR5AdfJVZN50B6/ySvVwcAn07i9VRX
 tnt2kz0UqReYpLt0wyJ7
 =YP7o
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY driver updates from Greg KH:
 "Here are the large set of USB and PHY driver updates for 5.8-rc1.

  Nothing huge, just lots of little things:

   - USB gadget fixes and additions all over the place

   - new PHY drivers

   - PHY driver fixes and updates

   - XHCI driver updates

   - musb driver updates

   - more USB-serial driver ids added

   - various USB quirks added

   - thunderbolt minor updates and fixes

   - typec updates and additions

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (245 commits)
  usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs
  usb: dwc3: meson-g12a: fix error path when fetching the reset line fails
  Revert "dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings"
  Revert "dt-bindings: usb: qcom,dwc3: Add compatible for SC7180"
  Revert "dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver"
  USB: serial: ch341: fix lockup of devices with limited prescaler
  USB: serial: ch341: add basis for quirk detection
  CDC-ACM: heed quirk also in error handling
  USB: serial: option: add Telit LE910C1-EUX compositions
  usb: musb: Fix runtime PM imbalance on error
  usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set
  usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle
  usb: musb: use true for 'use_dma'
  usb: musb: start session in resume for host port
  usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
  USB: serial: qcserial: add DW5816e QDL support
  thunderbolt: Add trivial .shutdown
  usb: dwc3: keystone: Turn on USB3 PHY before controller
  dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property
  dt-bindings: usb: convert keystone-usb.txt to YAML
  ...
 2020-06-07 09:42:16 -07:00
Linus Torvalds
b170290c28 Kconfig updates for v5.8 
- allow only 'config', 'comment', 'if' statements inside 'choice' since
    the other statements are not sensible inside 'choice' and should be
    grammatical error
 
  - support LMC_KEEP env variable for 'make local{yes,mod}config' to
    preserve some CONFIG options
 
  - deprecate 'make kvmconfig' and 'make xenconfig' in favor of
    'make kvm_guest.config' and 'make xen.config'
 
  - code cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl7bsBkVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGjgwP/17odsg7DK15nFXiT0A7A1VzMZpf
 4oOjRo7W+J3zplEzLAFCf759Cov+MeqEdApzTWc+10bLXh5UlWBN8A1wof8dt5SV
 uQZMDO90uqB/sIwTZc8PJrn+9PiGl8D0L/WHMBOvz1AYaK8SBnB6xO0Xf/mn/AFX
 xpjxOhkUjTO59sNn8X3xjgDROkLp/iD3aC0sxo88U30n1aoV2surkPbG2/X879M4
 Q+sW1phPqXoC9WsOJHmsWOx5IdZoj2hy0z4uWGGjXuZwimNQd2PnhuhRg0xfp+WN
 8OYK4B74gnTAAFh2AyQu89DcNCiBYMGwRlrPrsvszODsUZjjgAPWouDpvrwVHf+R
 fZDTPtccQK4BELxIg3lbPCQPfzTDXfsxcK7R4X2AizdLKsh6yI5mdqGR0XcCxCyH
 gEtBNDHsMt4X4g4Z916cvewCmr5dmz+gAKem83j5fPhmVddMCcBgd6W8Dj9NUzGs
 cloHhs9gOGt0w+xBWGftcWARW4/wTf+Dn0yJ6QAaobq/QwMLFDWv8rDy0xzLttjA
 ISNetBUofolmvKiLqgblwY66yCgDzLJhNhR0L8jEJTMGq02Bi76BwnADlr3vnraw
 Bx4tmAoVGx+JXw/TrEY7Be5u/Ji/ofv7YTN9RZZOD9m5Om5HD3zFbtCXN+/8t83D
 2iD1imSJ0TQId36y
 =FlOD
 -----END PGP SIGNATURE-----

Merge tag 'kconfig-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kconfig updates from Masahiro Yamada:

 - allow only 'config', 'comment', 'if' statements inside 'choice' since
   the other statements are not sensible inside 'choice' and should be
   grammatical error

 - support LMC_KEEP env variable for 'make local{yes,mod}config' to
   preserve some CONFIG options

 - deprecate 'make kvmconfig' and 'make xenconfig' in favor of
   'make kvm_guest.config' and 'make xen.config'

 - code cleanups

* tag 'kconfig-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: announce removal of 'kvmconfig' and 'xenconfig' shorthands
  streamline_config.pl: add LMC_KEEP to preserve some kconfigs
  kconfig: allow only 'config', 'comment', and 'if' inside 'choice'
  kconfig: tests: remove randconfig test for choice in choice
  kconfig: do not assign a variable in the return statement
  kconfig: do not use OR-assignment for zero-cleared structure
 2020-06-06 12:07:28 -07:00
Linus Torvalds
cff11abeca Kbuild updates for v5.8 
- fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32
 
  - ensure to rebuild all objects when the compiler is upgraded
 
  - exclude system headers from dependency tracking and fixdep processing
 
  - fix potential bit-size mismatch between the kernel and BPF user-mode
    helper
 
  - add the new syntax 'userprogs' to build user-space programs for the
    target architecture (the same arch as the kernel)
 
  - compile user-space sample code under samples/ for the target arch
    instead of the host arch
 
  - make headers_install fail if a CONFIG option is leaked to user-space
 
  - sanitize the output format of scripts/checkstack.pl
 
  - handle ARM 'push' instruction in scripts/checkstack.pl
 
  - error out before modpost if a module name conflict is found
 
  - error out when multiple directories are passed to M= because this
    feature is broken for a long time
 
  - add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info
 
  - a lot of cleanups of modpost
 
  - dump vmlinux symbols out into vmlinux.symvers, and reuse it in the
    second pass of modpost
 
  - do not run the second pass of modpost if nothing in modules is updated
 
  - install modules.builtin(.modinfo) by 'make install' as well as by
    'make modules_install' because it is useful even when CONFIG_MODULES=n
 
  - add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ
    to allow users to use alternatives such as pigz, pbzip2, etc.
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl7brm0VHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGjeEP/Rrf8H9cp/Tq+ALQCBycI3W5ZEHg
 n2EqprZkVP2MlOV0d+8b9t4PdZf6E5Wmfv26sMaBAhl6X1KQI/0NgPMnTINvy5jJ
 Q2SMhj9y8Gwr3XKFu9Hd/0U+Sax5rz+LmY84tdF95dXzPIUWjAEVnbmN+ofY6T++
 sNf2YGNFSR6iiqr3uCYA0hHZmpKlfhVgDPAdncWa5aadSsuQb79nZQWefGeVEsuD
 HrISpwnkhBc0qY1xyWry6agE92xWmkNkdjKq6A7peguZL02XySWLRWjyHoiiaPOB
 6U4urKs/NSXqPgxGxwZthhwERHryC3+g4s8wRBDKE6ISRWKBBA2ruHpgdF5h/utu
 re1ZP2qRcAt8NBFynr4MEb2AU0mYkv7iEgfLJ7NUCRlMOtqrn5RFwnS4r8ReyQp5
 1UM11RbPhYgYjM5g9hBHJ7nK944/kfvy1/4jF4I1+M5O7QL6f00pu3r2bBIa/65g
 DWrNOpIliKG27GgnRlxi7HgLfxs9etFcXTpHO0ymgnMmlz+7FQsdceR9qqybGU9o
 yBWw6zculMQjb3E+k0DTnE5kLWsycbua921wxM9ABSxRmJi7WciNF73RdLUIBoAY
 VUbwrP2aIpdL+2uyX6RqdTaWzEBpW8omszr46aQ96pX+RiqMrPvJRLaA/tr3ZH8g
 tdHenJPWdHSaOcO4
 =GKe5
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32

 - ensure to rebuild all objects when the compiler is upgraded

 - exclude system headers from dependency tracking and fixdep processing

 - fix potential bit-size mismatch between the kernel and BPF user-mode
   helper

 - add the new syntax 'userprogs' to build user-space programs for the
   target architecture (the same arch as the kernel)

 - compile user-space sample code under samples/ for the target arch
   instead of the host arch

 - make headers_install fail if a CONFIG option is leaked to user-space

 - sanitize the output format of scripts/checkstack.pl

 - handle ARM 'push' instruction in scripts/checkstack.pl

 - error out before modpost if a module name conflict is found

 - error out when multiple directories are passed to M= because this
   feature is broken for a long time

 - add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info

 - a lot of cleanups of modpost

 - dump vmlinux symbols out into vmlinux.symvers, and reuse it in the
   second pass of modpost

 - do not run the second pass of modpost if nothing in modules is
   updated

 - install modules.builtin(.modinfo) by 'make install' as well as by
   'make modules_install' because it is useful even when
   CONFIG_MODULES=n

 - add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ
   to allow users to use alternatives such as pigz, pbzip2, etc.

* tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (96 commits)
  kbuild: add variables for compression tools
  Makefile: install modules.builtin even if CONFIG_MODULES=n
  mksysmap: Fix the mismatch of '.L' symbols in System.map
  kbuild: doc: rename LDFLAGS to KBUILD_LDFLAGS
  modpost: change elf_info->size to size_t
  modpost: remove is_vmlinux() helper
  modpost: strip .o from modname before calling new_module()
  modpost: set have_vmlinux in new_module()
  modpost: remove mod->skip struct member
  modpost: add mod->is_vmlinux struct member
  modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}()
  modpost: remove mod->is_dot_o struct member
  modpost: move -d option in scripts/Makefile.modpost
  modpost: remove -s option
  modpost: remove get_next_text() and make {grab,release_}file static
  modpost: use read_text_file() and get_line() for reading text files
  modpost: avoid false-positive file open error
  modpost: fix potential mmap'ed file overrun in get_src_version()
  modpost: add read_text_file() and get_line() helpers
  modpost: do not call get_modinfo() for vmlinux(.o)
  ...
 2020-06-06 12:00:25 -07:00
Linus Torvalds
3925c3bbdf pci-v5.8-changes 
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAl7ZUn8UHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vwuyxAAnjyHTbjpLtFcSh1on0Tsehi6hAiV
 o8w40hj3geQv/zVPgRsui3OSE9PTihPacKUQBxs/7M/iSF3cKzQEreYqDNbOMlun
 957X6CD0yTPChjcHy2brFFhQqs6O8Nl/acvkHKKP369nZkost5A2TMHPSKzKajdB
 fYw6imeunIvSpUYH9GlP9CU+suj25UHQqxUUyXAHqmF4R89j3mTpSMYJzq3VN426
 R77xeRC26lUEHepRgEiaFmdEK0zGTp/uXsJQNwaIFduNfX6x6Oo8u9EC4Mrb48g1
 duoxLUV6a8bqpjkwpPfQIv7lw1Mm1mx/vMA040zGVQR98QAMZacCPJO7eVHM/N9/
 m62bymyKHuNxXhWQwbeAyF0ZH+usaCFh7uidd4L0x1Uvs/GNCGD/icuKxHTnRWLv
 1P4bZg0n23YFzE5/eXY2voos+rfrycIoC5gspuJdP/H2Q5UM/EnI1RhizIItuqJY
 ORAdczo7a8oamt90WWZ636HeL1UQIGZjq1iWz2++vRTJGzfLeuOJj76cn2RuDQsZ
 +rBtQ1zH3saEZSARPdS5HQH+SaDxtjfu/AaAz6NDNSvasDLqmjRdOkM6UIU2pqMG
 cE9um1ijcSy2UjUInVPr3Hk7bbbd9YJTQQiWr04uL6ap0JpwRhSPqQpDHtLwLh+E
 R13t08tEMd09730=
 =9ymj
 -----END PGP SIGNATURE-----

Merge tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Program MPS for RCiEP devices (Ashok Raj)

   - Fix pci_register_host_bridge() device_register() error handling
     (Rob Herring)

   - Fix pci_host_bridge struct device release/free handling (Rob
     Herring)

  Resource management:

   - Allow resizing BARs for devices on root bus (Ard Biesheuvel)

  Power management:

   - Reduce Thunderbolt resume time by working around devices that don't
     support DLL Link Active reporting (Mika Westerberg)

   - Work around a Pericom USB controller OHCI/EHCI PME# defect
     (Kai-Heng Feng)

  Virtualization:

   - Add ACS quirk for Intel Root Complex Integrated Endpoints (Ashok
     Raj)

   - Avoid FLR for AMD Starship USB 3.0 (Kevin Buettner)

   - Avoid FLR for AMD Matisse HD Audio & USB 3.0 (Marcos Scriven)

  Error handling:

   - Use only _OSC (not HEST FIRMWARE_FIRST) to determine AER ownership
     (Alexandru Gagniuc, Kuppuswamy Sathyanarayanan)

   - Reduce verbosity by logging only ACPI_NOTIFY_DISCONNECT_RECOVER
     events (Kuppuswamy Sathyanarayanan)

   - Don't enable AER by default in Kconfig (Bjorn Helgaas)

  Peer-to-peer DMA:

   - Add AMD Zen Raven and Renoir Root Ports to whitelist (Alex Deucher)

  ASPM:

   - Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges (Kai-Heng Feng)

  Endpoint framework:

   - Fix DMA channel release in test (Kunihiko Hayashi)

   - Add page size as argument to pci_epc_mem_init() (Lad Prabhakar)

   - Add support to handle multiple base for mapping outbound memory
     (Lad Prabhakar)

  Generic host bridge driver:

   - Support building as module (Rob Herring)

   - Eliminate pci_host_common_probe wrappers (Rob Herring)

  Amlogic Meson PCIe controller driver:

   - Don't use FAST_LINK_MODE to set up link (Marc Zyngier)

  Broadcom STB PCIe controller driver:

   - Disable ASPM L0s if 'aspm-no-l0s' in DT (Jim Quinlan)

   - Fix clk_put() error (Jim Quinlan)

   - Fix window register offset (Jim Quinlan)

   - Assert fundamental reset on initialization (Nicolas Saenz Julienne)

   - Add notify xHCI reset property (Nicolas Saenz Julienne)

   - Add init routine for Raspberry Pi 4 VL805 USB controller (Nicolas
     Saenz Julienne)

   - Sync with Raspberry Pi 4 firmware for VL805 initialization (Nicolas
     Saenz Julienne)

  Cadence PCIe controller driver:

   - Remove "cdns,max-outbound-regions" DT property (replaced by
     "ranges") (Kishon Vijay Abraham I)

   - Read 32-bit (not 16-bit) Vendor ID/Device ID property from DT
     (Kishon Vijay Abraham I)

  Marvell Aardvark PCIe controller driver:

   - Improve link training (Marek Behún)

   - Add PHY support (Marek Behún)

   - Add "phys", "max-link-speed", "reset-gpios" to dt-binding (Marek
     Behún)

   - Train link immediately after enabling training to work around
     detection issues with some cards (Pali Rohár)

   - Issue PERST via GPIO to work around detection issues (Pali Rohár)

   - Don't blindly enable ASPM L0s (Pali Rohár)

   - Replace custom macros by standard linux/pci_regs.h macros (Pali
     Rohár)

  Microsoft Hyper-V host bridge driver:

   - Fix probe failure path to release resource (Wei Hu)

   - Retry PCI bus D0 entry on invalid device state for kdump (Wei Hu)

  Renesas R-Car PCIe controller driver:

   - Fix incorrect programming of OB windows (Andrew Murray)

   - Add suspend/resume (Kazufumi Ikeda)

   - Rename pcie-rcar.c to pcie-rcar-host.c (Lad Prabhakar)

   - Add endpoint controller driver (Lad Prabhakar)

   - Fix PCIEPAMR mask calculation (Lad Prabhakar)

   - Add r8a77961 to DT binding (Yoshihiro Shimoda)

  Socionext UniPhier Pro5 controller driver:

   - Add endpoint controller driver (Kunihiko Hayashi)

  Synopsys DesignWare PCIe controller driver:

   - Program outbound ATU upper limit register (Alan Mikhak)

   - Fix inner MSI IRQ domain registration (Marc Zyngier)

  Miscellaneous:

   - Check for platform_get_irq() failure consistently (negative return
     means failure) (Aman Sharma)

   - Fix several runtime PM get/put imbalances (Dinghao Liu)

   - Use flexible-array and struct_size() helpers for code cleanup
     (Gustavo A. R. Silva)

   - Update & fix issues in bridge emulation of PCIe registers (Jon
     Derrick)

   - Add macros for bridge window names (PCI_BRIDGE_IO_WINDOW, etc)
     (Krzysztof Wilczyński)

   - Work around Intel PCH MROMs that have invalid BARs (Xiaochun Lee)"

* tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits)
  PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver
  PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints
  PCI/DPC: Print IRQ number used by port
  PCI/AER: Use "aer" variable for capability offset
  PCI/AER: Remove redundant dev->aer_cap checks
  PCI/AER: Remove redundant pci_is_pcie() checks
  PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership
  PCI: tegra: Fix runtime PM imbalance on error
  PCI: vmd: Filter resource type bits from shadow register
  PCI: tegra194: Fix runtime PM imbalance on error
  dt-bindings: PCI: Add UniPhier PCIe endpoint controller description
  PCI: hv: Use struct_size() helper
  PCI: Rename _DSM constants to align with spec
  PCI: Avoid FLR for AMD Starship USB 3.0
  PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0
  x86/PCI: Drop unused xen_register_pirq() gsi_override parameter
  PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port
  PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link
  PCI: dwc: Fix inner MSI IRQ domain registration
  PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname()
  ...
 2020-06-06 11:01:58 -07:00
Linus Torvalds
4a7e89c5ec Merge branch 'for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup 
Pull cgroup updates from Tejun Heo:
 "Just two patches: one to add system-level cpu.stat to the root cgroup
  for convenience and a trivial comment update"

* 'for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: add cpu.stat file to root cgroup
  cgroup: Remove stale comments
 2020-06-06 09:59:34 -07:00
Masahiro Yamada
c0901577e1 kbuild: doc: rename LDFLAGS to KBUILD_LDFLAGS 
Commit d503ac531a ("kbuild: rename LDFLAGS to KBUILD_LDFLAGS") missed
to update the documentation.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
 2020-06-06 23:39:20 +09:00
Masahiro Yamada
269a535ca9 modpost: generate vmlinux.symvers and reuse it for the second modpost 
The full build runs modpost twice, first for vmlinux.o and second for
modules.

The first pass dumps all the vmlinux symbols into Module.symvers, but
the second pass parses vmlinux again instead of reusing the dump file,
presumably because it needs to avoid accumulating stale symbols.

Loading symbol info from a dump file is faster than parsing an ELF object.
Besides, modpost deals with various issues to parse vmlinux in the second
pass.

A solution is to make the first pass dumps symbols into a separate file,
vmlinux.symvers. The second pass reads it, and parses module .o files.
The merged symbol information is dumped into Module.symvers in the same
way as before.

This makes further modpost cleanups possible.

Also, it fixes the problem of 'make vmlinux', which previously overwrote
Module.symvers, throwing away module symbols.

I slightly touched scripts/link-vmlinux.sh so that vmlinux is re-linked
when you cross this commit. Otherwise, vmlinux.symvers would not be
generated.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
 2020-06-06 23:38:12 +09:00
Linus Torvalds
0b166a57e6 A lot of bug fixes and cleanups for ext4, including: 
* Fix performance problems found in dioread_nolock now that it is the
   default, caused by transaction leaks.
 * Clean up fiemap handling in ext4
 * Clean up and refactor multiple block allocator (mballoc) code
 * Fix a problem with mballoc with a smaller file systems running out
   of blocks because they couldn't properly use blocks that had been
   reserved by inode preallocation.
 * Fixed a race in ext4_sync_parent() versus rename()
 * Simplify the error handling in the extent manipulation code
 * Make sure all metadata I/O errors are felected to ext4_ext_dirty()'s and
   ext4_make_inode_dirty()'s callers.
 * Avoid passing an error pointer to brelse in ext4_xattr_set()
 * Fix race which could result to freeing an inode on the dirty last
   in data=journal mode.
 * Fix refcount handling if ext4_iget() fails
 * Fix a crash in generic/019 caused by a corrupted extent node
 -----BEGIN PGP SIGNATURE-----
 
 iQEyBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl7Ze8kACgkQ8vlZVpUN
 gaNChAf4xn0ytFSrweI/S2Sp05G/2L/ocZ2TZZk2ZdGeN1E+ABdSIv/zIF9zuFgZ
 /pY/C+fyEZWt4E3FlNO8gJzoEedkzMCMnUhSIfI+wZbcclyTOSNMJtnrnJKAEtVH
 HOvGZJmg357jy407RCGhZpJ773nwU2xhBTr5OFxvSf9mt/vzebxIOnw5D7HPlC1V
 Fgm6Du8q+tRrPsyjv1Yu4pUEVXMJ7qUcvt326AXVM3kCZO1Aa5GrURX0w3J4mzW1
 tc1tKmtbLcVVYTo9CwHXhk/edbxrhAydSP2iACand3tK6IJuI6j9x+bBJnxXitnr
 vsxsfTYMG18+2SxrJ9LwmagqmrRq
 =HMTs
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "A lot of bug fixes and cleanups for ext4, including:

   - Fix performance problems found in dioread_nolock now that it is the
     default, caused by transaction leaks.

   - Clean up fiemap handling in ext4

   - Clean up and refactor multiple block allocator (mballoc) code

   - Fix a problem with mballoc with a smaller file systems running out
     of blocks because they couldn't properly use blocks that had been
     reserved by inode preallocation.

   - Fixed a race in ext4_sync_parent() versus rename()

   - Simplify the error handling in the extent manipulation code

   - Make sure all metadata I/O errors are felected to
     ext4_ext_dirty()'s and ext4_make_inode_dirty()'s callers.

   - Avoid passing an error pointer to brelse in ext4_xattr_set()

   - Fix race which could result to freeing an inode on the dirty last
     in data=journal mode.

   - Fix refcount handling if ext4_iget() fails

   - Fix a crash in generic/019 caused by a corrupted extent node"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (58 commits)
  ext4: avoid unnecessary transaction starts during writeback
  ext4: don't block for O_DIRECT if IOCB_NOWAIT is set
  ext4: remove the access_ok() check in ext4_ioctl_get_es_cache
  fs: remove the access_ok() check in ioctl_fiemap
  fs: handle FIEMAP_FLAG_SYNC in fiemap_prep
  fs: move fiemap range validation into the file systems instances
  iomap: fix the iomap_fiemap prototype
  fs: move the fiemap definitions out of fs.h
  fs: mark __generic_block_fiemap static
  ext4: remove the call to fiemap_check_flags in ext4_fiemap
  ext4: split _ext4_fiemap
  ext4: fix fiemap size checks for bitmap files
  ext4: fix EXT4_MAX_LOGICAL_BLOCK macro
  add comment for ext4_dir_entry_2 file_type member
  jbd2: avoid leaking transaction credits when unreserving handle
  ext4: drop ext4_journal_free_reserved()
  ext4: mballoc: use lock for checking free blocks while retrying
  ext4: mballoc: refactor ext4_mb_good_group()
  ext4: mballoc: introduce pcpu seqcnt for freeing PA to improve ENOSPC handling
  ext4: mballoc: refactor ext4_mb_discard_preallocations()
  ...
 2020-06-05 16:19:28 -07:00
Linus Torvalds
b25c6644bf - Largest change for this cycle is the DM zoned target's metadata 
version 2 feature that adds support for pairing regular block
   devices with a zoned device to ease performance impact associated
   with finite random zones of zoned device.  Changes came in 3
   batches: first prepared for and then added the ability to pair a
   single regular block device, second was a batch of fixes to improve
   zoned's reclaim heuristic, third removed the limitation of only
   adding a single additional regular block device to allow many
   devices.  Testing has shown linear scaling as more devices are
   added.
 
 - Add new emulated block size (ebs) target that emulates a smaller
   logical_block_size than a block device supports.  Primary use-case
   is to emulate "512e" devices that have 512 byte logical_block_size
   and 4KB physical_block_size.  This is useful to some legacy
   applications otherwise wouldn't be ablee to be used on 4K devices
   because they depend on issuing IO in 512 byte granularity.
 
 - Add discard interfaces to DM bufio.  First consumer of the interface
   is the dm-ebs target that makes heavy use of dm-bufio.
 
 - Fix DM crypt's block queue_limits stacking to not truncate
   logic_block_size.
 
 - Add Documentation for DM integrity's status line.
 
 - Switch DMDEBUG from a compile time config option to instead use
   dynamic debug via pr_debug.
 
 - Fix DM multipath target's hueristic for how it manages
   "queue_if_no_path" state internally.  DM multipath now avoids
   disabling "queue_if_no_path" unless it is actually needed (e.g. in
   response to configure timeout or explicit "fail_if_no_path"
   message).  This fixes reports of spurious -EIO being reported back
   to userspace application during fault tolerance testing with an NVMe
   backend.  Added various dynamic DMDEBUG messages to assist with
   debugging queue_if_no_path in the future.
 
 - Add a new DM multipath "Historical Service Time" Path Selector.
 
 - Fix DM multipath's dm_blk_ioctl() to switch paths on IO error.
 
 - Improve DM writecache target performance by using explicit
   cache flushing for target's single-threaded usecase and a small
   cleanup to remove unnecessary test in persistent_memory_claim.
 
 - Other small cleanups in DM core, dm-persistent-data, and DM integrity.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl7alrgTHHNuaXR6ZXJA
 cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWl42B/9sBd+j60emy4Bliu/f3pd7SEkFrSXv
 K2jXicRFx4E5kO0aLK+fX65cOiq2vvLsDh8c++0TLXcD9q7oK0qxK9c8TCPq29Cx
 W2J2dwdjyyqqbr3/FZHYYM9KLOl5rsxJLygXwhJhQ2Gny44L7nVACrAXNzXIHJ3r
 f8xr+GLdF/jz7WLj8bwEDo3Bf8wvxDvl2ijqj7EceOhTutNE8xHQ6UcTPqTtozJy
 sNM8UQNk1L43DBAvXfrKZ+yQ5DYAKdXKJpV9C8qv5DEGbaEikuMrHddgO4KlDdp4
 VjPk9GSfPwGcJ4ecN8vgecZVGvh52ZU7OZ8qey/q0zqps74jeHTZQQyM
 =jRun
 -----END PGP SIGNATURE-----

Merge tag 'for-5.8/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - The largest change for this cycle is the DM zoned target's metadata
   version 2 feature that adds support for pairing regular block devices
   with a zoned device to ease the performance impact associated with
   finite random zones of zoned device.

   The changes came in three batches: the first prepared for and then
   added the ability to pair a single regular block device, the second
   was a batch of fixes to improve zoned's reclaim heuristic, and the
   third removed the limitation of only adding a single additional
   regular block device to allow many devices.

   Testing has shown linear scaling as more devices are added.

 - Add new emulated block size (ebs) target that emulates a smaller
   logical_block_size than a block device supports

   The primary use-case is to emulate "512e" devices that have 512 byte
   logical_block_size and 4KB physical_block_size. This is useful to
   some legacy applications that otherwise wouldn't be able to be used
   on 4K devices because they depend on issuing IO in 512 byte
   granularity.

 - Add discard interfaces to DM bufio. First consumer of the interface
   is the dm-ebs target that makes heavy use of dm-bufio.

 - Fix DM crypt's block queue_limits stacking to not truncate
   logic_block_size.

 - Add Documentation for DM integrity's status line.

 - Switch DMDEBUG from a compile time config option to instead use
   dynamic debug via pr_debug.

 - Fix DM multipath target's hueristic for how it manages
   "queue_if_no_path" state internally.

   DM multipath now avoids disabling "queue_if_no_path" unless it is
   actually needed (e.g. in response to configure timeout or explicit
   "fail_if_no_path" message).

   This fixes reports of spurious -EIO being reported back to userspace
   application during fault tolerance testing with an NVMe backend.
   Added various dynamic DMDEBUG messages to assist with debugging
   queue_if_no_path in the future.

 - Add a new DM multipath "Historical Service Time" Path Selector.

 - Fix DM multipath's dm_blk_ioctl() to switch paths on IO error.

 - Improve DM writecache target performance by using explicit cache
   flushing for target's single-threaded usecase and a small cleanup to
   remove unnecessary test in persistent_memory_claim.

 - Other small cleanups in DM core, dm-persistent-data, and DM
   integrity.

* tag 'for-5.8/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (62 commits)
  dm crypt: avoid truncating the logical block size
  dm mpath: add DM device name to Failing/Reinstating path log messages
  dm mpath: enhance queue_if_no_path debugging
  dm mpath: restrict queue_if_no_path state machine
  dm mpath: simplify __must_push_back
  dm zoned: check superblock location
  dm zoned: prefer full zones for reclaim
  dm zoned: select reclaim zone based on device index
  dm zoned: allocate zone by device index
  dm zoned: support arbitrary number of devices
  dm zoned: move random and sequential zones into struct dmz_dev
  dm zoned: per-device reclaim
  dm zoned: add metadata pointer to struct dmz_dev
  dm zoned: add device pointer to struct dm_zone
  dm zoned: allocate temporary superblock for tertiary devices
  dm zoned: convert to xarray
  dm zoned: add a 'reserved' zone flag
  dm zoned: improve logging messages for reclaim
  dm zoned: avoid unnecessary device recalulation for secondary superblock
  dm zoned: add debugging message for reading superblocks
  ...
 2020-06-05 15:45:03 -07:00
Linus Torvalds
242b233198 RDMA 5.8 merge window pull request 
A few large, long discussed works this time. The RNBD block driver has
 been posted for nearly two years now, and the removal of FMR has been a
 recurring discussion theme for a long time. The usual smattering of
 features and bug fixes.
 
 - Various small driver bugs fixes in rxe, mlx5, hfi1, and efa
 
 - Continuing driver cleanups in bnxt_re, hns
 
 - Big cleanup of mlx5 QP creation flows
 
 - More consistent use of src port and flow label when LAG is used and a
   mlx5 implementation
 
 - Additional set of cleanups for IB CM
 
 - 'RNBD' network block driver and target. This is a network block RDMA
   device specific to ionos's cloud environment. It brings strong multipath
   and resiliency capabilities.
 
 - Accelerated IPoIB for HFI1
 
 - QP/WQ/SRQ ioctl migration for uverbs, and support for multiple async fds
 
 - Support for exchanging the new IBTA defiend ECE data during RDMA CM
   exchanges
 
 - Removal of the very old and insecure FMR interface from all ULPs and
   drivers. FRWR should be preferred for at least a decade now.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl7X/IwACgkQOG33FX4g
 mxp2uw/+MI2S/aXqEBvZfTT8yrkAwqYezS0VeTDnwH/T6UlTMDhHVN/2Ji3tbbX3
 FEKT1i2mnAL5RqUAL1lr9g4sG/bVozrpN46Ws5Lu9dTbIPLKTNPWDuLFQDUShKY7
 OyMI/bRx6anGnsOy20iiBqnrQbrrZj5TECgnmrkAl62QFdcl7aBWe/yYjy4CT11N
 ub+aBXBREN1F1pc0HIjd2tI+8gnZc+mNm1LVVDRH9Capun/pI26qDNh7e6QwGyIo
 n8ItraC8znLwv/nsUoTE7/JRcsTEe6vJI26PQmczZfNJs/4O65G7fZg0eSBseZYi
 qKf7Uwtb3qW0R7jRUMEgFY4DKXVAA0G2ph40HXBuzOSsqlT6HqYMO2wgG8pJkrTc
 qAjoSJGzfAHIsjxzxKI8wKuufCddjCm30VWWU7EKeriI6h1J0uPVqKkQMfYBTkik
 696eZSBycAVgwayOng3XaehiTxOL7qGMTjUpDjUR6UscbiPG919vP+QsbIUuBXdb
 YoddBQJdyGJiaCXv32ciJjo9bjPRRi/bII7Q5qzCNI2mi4ZVbudF4ffzyQvdHtNJ
 nGnpRXoPi7kMvUrKTMPWkFjj0R5/UsPszsA51zbxPydfgBe0Dlc2PrrIG8dlzYAp
 wbV0Lec+iJucKlt7EZtrjz1xOiOOaQt/5/cW1bWqL+wk2t6gAuY=
 =9zTe
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma updates from Jason Gunthorpe:
 "A more active cycle than most of the recent past, with a few large,
  long discussed works this time.

  The RNBD block driver has been posted for nearly two years now, and
  flowing through RDMA due to it also introducing a new ULP.

  The removal of FMR has been a recurring discussion theme for a long
  time.

  And the usual smattering of features and bug fixes.

  Summary:

   - Various small driver bugs fixes in rxe, mlx5, hfi1, and efa

   - Continuing driver cleanups in bnxt_re, hns

   - Big cleanup of mlx5 QP creation flows

   - More consistent use of src port and flow label when LAG is used and
     a mlx5 implementation

   - Additional set of cleanups for IB CM

   - 'RNBD' network block driver and target. This is a network block
     RDMA device specific to ionos's cloud environment. It brings strong
     multipath and resiliency capabilities.

   - Accelerated IPoIB for HFI1

   - QP/WQ/SRQ ioctl migration for uverbs, and support for multiple
     async fds

   - Support for exchanging the new IBTA defiend ECE data during RDMA CM
     exchanges

   - Removal of the very old and insecure FMR interface from all ULPs
     and drivers. FRWR should be preferred for at least a decade now"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (247 commits)
  RDMA/cm: Spurious WARNING triggered in cm_destroy_id()
  RDMA/mlx5: Return ECE DC support
  RDMA/mlx5: Don't rely on FW to set zeros in ECE response
  RDMA/mlx5: Return an error if copy_to_user fails
  IB/hfi1: Use free_netdev() in hfi1_netdev_free()
  RDMA/hns: Uninitialized variable in modify_qp_init_to_rtr()
  RDMA/core: Move and rename trace_cm_id_create()
  IB/hfi1: Fix hfi1_netdev_rx_init() error handling
  RDMA: Remove 'max_map_per_fmr'
  RDMA: Remove 'max_fmr'
  RDMA/core: Remove FMR device ops
  RDMA/rdmavt: Remove FMR memory registration
  RDMA/mthca: Remove FMR support for memory registration
  RDMA/mlx4: Remove FMR support for memory registration
  RDMA/i40iw: Remove FMR leftovers
  RDMA/bnxt_re: Remove FMR leftovers
  RDMA/mlx5: Remove FMR leftovers
  RDMA/core: Remove FMR pool API
  RDMA/rds: Remove FMR support for memory registration
  RDMA/srp: Remove support for FMR memory registration
  ...
 2020-06-05 14:05:57 -07:00
Linus Torvalds
3f7e82379f This is the bulk of GPIO changes for the v5.8 kernel cycle. 
Core changes:
 
 - A new GPIO aggregator driver has been merged: this can
   join a few select GPIO lines into a new aggregated GPIO
   chip. This can be used for security: a process can be
   granted access to only these lines, for example for
   industrial control. Another way to use this is to
   reexpose certain select lines to a virtual machine or
   container.
 
 - Warn if the gpio-line-names is too long in he DT parser
   core.
 
 - GPIO lines can now be looked up by line name in addition
   to being looked up by offset.
 
 New drivers:
 
 - A new generic regmap GPIO driver has been merged. Too
   many regmap drivers are starting to look like each other
   so we need to create some common ground and try to move
   drivers over to using that.
 
 - The F7188X driver now supports F81865.
 
 Driver improvements:
 
 - Large improvements to the PCA953x expander, get multiple lines
   and several cleanups.
 
 - Large improvements to the DesignWare DWAPB driver, and Sergey
   Semin has volunteered to maintain it.
 
 - PL061 can now be built as a module, this is part of a bigger
   effort to make the ARM platforms more modular.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl7ZarsACgkQQRCzN7AZ
 XXNRERAAvb/8YZX8yzfWqqKZ+aXxBOzn5LsbS15QjJz9W22wAZNhjNEHAtzd+xNJ
 BiyDt+BQLGqIr2aCKglVFOOYfa8PhTjrVA40ujRFUs3d8q8gr/RFpfGN3/w36h0W
 e3+QCHqe27Sk07wCB3RH7hzGcKhEUUt+A5sI0uX/nt9obx8IxdVPkafBYqCfdfWw
 qv9T/MU75ZYeLURg24AkgZR069gQeiDAEKVa8lYh9qKBhircFzBxM6Bg9Efn8tst
 E+6XIXNREslXBq5wtAosXI/t25ZpYtzDvkM5+/lm1jQyjMEh9wJyjmgu7tcRRZRK
 xxxOcUHybDJaCFogkA5iOLzyfcUbGZM/i5wQkUE3SPACypGfncjkYZPdY6Smljd1
 SfBfl48xch2WW12f1/P04VwSVDNxNe9/RUqapZ5ZQfd2DJwyiZM6p+S85rrFKJse
 BvixFpGMY3J5h/lZUoaF93JaaQiWh2RK6WnsBvMVn2P9+WyPnwdUL2EX2RrYvdMR
 iH3jmRzlSeVQnest5c1k+i05O3D0fq3gJ+qvzT5gqxbFdRm6HZEhJNiVT56Y1V4n
 30FJMbXg8mddxLvl7b1Hfi5E7PLFOP9Ygz7bHxAfogROGpWMMGgAlynxcSjqUesg
 YWoRPl0XmtMcsvVNJvLM/B3+Gxh78CsMzo4Nwh9FtgUMOG6B0Xw=
 =B5OK
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v5.8 kernel cycle.

  Core changes:

   - A new GPIO aggregator driver has been merged: this can join a few
     select GPIO lines into a new aggregated GPIO chip. This can be used
     for security: a process can be granted access to only these lines,
     for example for industrial control. Another way to use this is to
     reexpose certain select lines to a virtual machine or container.

   - Warn if the gpio-line-names is too long in he DT parser core.

   - GPIO lines can now be looked up by line name in addition to being
     looked up by offset.

  New drivers:

   - A new generic regmap GPIO driver has been merged. Too many regmap
     drivers are starting to look like each other so we need to create
     some common ground and try to move drivers over to using that.

   - The F7188X driver now supports F81865.

  Driver improvements:

   - Large improvements to the PCA953x expander, get multiple lines and
     several cleanups.

   - Large improvements to the DesignWare DWAPB driver, and Sergey Semin
     has volunteered to maintain it.

   - PL061 can now be built as a module, this is part of a bigger effort
     to make the ARM platforms more modular"

* tag 'gpio-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits)
  gpio: pca953x: Drop unneeded ACPI_PTR()
  MAINTAINERS: Add gpio regmap section
  gpio: add a reusable generic gpio_chip using regmap
  gpiolib: Introduce gpiochip_irqchip_add_domain()
  gpio: gpiolib: Allow GPIO IRQs to lazy disable
  gpiolib: Separate GPIO_GET_LINEINFO_WATCH_IOCTL conditional
  gpio: rcar: Fix runtime PM imbalance on error
  gpio: pca935x: Allow IRQ support for driver built as a module
  gpio: pxa: Add COMPILE_TEST support
  dt-bindings: gpio: Add renesas,em-gio bindings
  MAINTAINERS: Fix file name for DesignWare GPIO DT schema
  gpio: dwapb: Remove unneeded has_irq member in struct dwapb_port_property
  gpio: dwapb: Don't use IRQ 0 as valid Linux interrupt
  gpio: dwapb: avoid error message for optional IRQ
  gpio: dwapb: Call acpi_gpiochip_free_interrupts() on GPIO chip de-registration
  gpio: max730x: bring gpiochip_add_data after port config
  MAINTAINERS: Add GPIO Aggregator section
  docs: gpio: Add GPIO Aggregator documentation
  gpio: Add GPIO Aggregator
  gpiolib: Add support for GPIO lookup by line name
  ...
 2020-06-05 14:00:30 -07:00
Linus Torvalds
7ae77150d9 powerpc updates for 5.8 
- Support for userspace to send requests directly to the on-chip GZIP
    accelerator on Power9.
 
  - Rework of our lockless page table walking (__find_linux_pte()) to make it
    safe against parallel page table manipulations without relying on an IPI for
    serialisation.
 
  - A series of fixes & enhancements to make our machine check handling more
    robust.
 
  - Lots of plumbing to add support for "prefixed" (64-bit) instructions on
    Power10.
 
  - Support for using huge pages for the linear mapping on 8xx (32-bit).
 
  - Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound driver.
 
  - Removal of some obsolete 40x platforms and associated cruft.
 
  - Initial support for booting on Power10.
 
  - Lots of other small features, cleanups & fixes.
 
 Thanks to:
   Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Andrey Abramov,
   Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent Abali, Cédric Le
   Goater, Chen Zhou, Christian Zigotzky, Christophe JAILLET, Christophe Leroy,
   Dmitry Torokhov, Emmanuel Nicolet, Erhard F., Gautham R. Shenoy, Geoff Levand,
   George Spelvin, Greg Kurz, Gustavo A. R. Silva, Gustavo Walbon, Haren Myneni,
   Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Kees Cook, Leonardo
   Bras, Madhavan Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael
   Neuling, Michal Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao,
   Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram
   Pai, Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
   Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler, Wolfram
   Sang, Xiongfeng Wang.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl7aYZ8THG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgPiKD/9zNCuZLFMAFrIdbm0HlYA2RGYZFT75
 GUHsqYyei1pxA7PgM3KwJiXELVODsBv0eQbgNh1tbecKrxPRegN/cywd1KLjPZ7I
 v5/qweQP8MvR0RhzjbhvUcO0jq/f8u2LbJr5mUfVzjU6tAvrvcWo3oZqDElsekCS
 kgyOH3r1vZ2PLTMiGFhb0gWi2iqc+6BHU1AFCGPCMjB1Vu5d5+54VvZ/6lllGsOF
 yg9CBXmmVvQ+Bn6tH4zdEB78FYxnAIwBqlbmL79i5ca+HQJ0Sw6HuPRy9XYq35p6
 2EiXS4Wrgp7i7+1TN3HO362u5Onb8TSyQU7NS6yCFPoJ6JQxcJMBIw6mHhnXOPuZ
 CrjgcdwUMjx8uDoKmX1Epbfuex2w+AysW+4yBHPFiSgl3klKC3D0wi95mR485w2F
 rN8uzJtrDeFKcYZJG7IoB/cgFCCPKGf9HaXr8q0S/jBKMffx91ul3cfzlfdIXOCw
 FDNw/+ZX7UD6ddFEG12ZTO+vdL8yf1uCRT/DIZwUiDMIA0+M6F4nc7j3lfyZfoO1
 65f9UlhoLxScq7VH2fKH4UtZatO9cPID2z1CmiY4UbUIPtFDepSuYClgLF+Duf4b
 rkfxhKU0+Ja1zNH5XNc+L+Bc5/W4lFiJXz02dYIjtHoUpWkc1aToOETVwzggYFNM
 G3PXIBOI0jRgRw==
 =o0WU
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

 - Support for userspace to send requests directly to the on-chip GZIP
   accelerator on Power9.

 - Rework of our lockless page table walking (__find_linux_pte()) to
   make it safe against parallel page table manipulations without
   relying on an IPI for serialisation.

 - A series of fixes & enhancements to make our machine check handling
   more robust.

 - Lots of plumbing to add support for "prefixed" (64-bit) instructions
   on Power10.

 - Support for using huge pages for the linear mapping on 8xx (32-bit).

 - Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound
   driver.

 - Removal of some obsolete 40x platforms and associated cruft.

 - Initial support for booting on Power10.

 - Lots of other small features, cleanups & fixes.

Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan,
Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent
Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe
JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F.,
Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A.
R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan
Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal
Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai,
Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler,
Wolfram Sang, Xiongfeng Wang.

* tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits)
  powerpc/pseries: Make vio and ibmebus initcalls pseries specific
  cxl: Remove dead Kconfig options
  powerpc: Add POWER10 architected mode
  powerpc/dt_cpu_ftrs: Add MMA feature
  powerpc/dt_cpu_ftrs: Enable Prefixed Instructions
  powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected
  powerpc: Add support for ISA v3.1
  powerpc: Add new HWCAP bits
  powerpc/64s: Don't set FSCR bits in INIT_THREAD
  powerpc/64s: Save FSCR to init_task.thread.fscr after feature init
  powerpc/64s: Don't let DT CPU features set FSCR_DSCR
  powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()
  powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG
  powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel
  powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations
  powerpc/module_64: Consolidate ftrace code
  powerpc/32: Disable KASAN with pages bigger than 16k
  powerpc/uaccess: Don't set KUEP by default on book3s/32
  powerpc/uaccess: Don't set KUAP by default on book3s/32
  powerpc/8xx: Reduce time spent in allow_user_access() and friends
  ...
 2020-06-05 12:39:30 -07:00
Mikulas Patocka
40e9c5ac4e dm integrity: add status line documentation 
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
 2020-06-05 14:59:40 -04:00
Linus Torvalds
571d54ed91 Devicetree updates for v5.8: 
- Convert various DT (non-binding) doc files to ReST
 
 - Various improvements to device link code
 
 - Fix __of_attach_node_sysfs refcounting bug
 
 - Add support for 'memory-region-names' with reserved-memory binding
 
 - Vendor prefixes for Protonic Holland, BeagleBoard.org, Alps, Check
   Point, Würth Elektronik, U-Boot, Vaisala, Baikal Electronics, Shanghai
   Awinic Technology Co., MikroTik, Silex Insight
 
 - A bunch more binding conversions to DT schema. Only 3K to go.
 
 - Add a minimum version check for schema tools
 
 - Treewide dropping of 'allOf' usage with schema references. Not needed
   in new json-schema spec.
 
 - Some formatting clean-ups of schemas
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAl7ZYa8QHHJvYmhAa2Vy
 bmVsLm9yZwAKCRD6+121jbxhw/zyD/42ZlYc2mKW5cHjGWr6vGAXG0KZq6AvHbeY
 setNPMhjKRKjWs/s3u0WVhEH7ZchzBhBi0PEVjqZCnxLTqkt+mdlelJVv3uYJVho
 2ZJiIi5Iso+nNQ+wAEFG2EzhnLH35RXTdlECANnhGUht/JOJlgEqdjjxdj8CVyWG
 0aGJRCRRGvzPiWAUyqcR/DpB+lz0ipaSNhxxECinT0OQ4OSheCJL811tQ5RGKZ24
 z7C/W+iQbFKHu2Yf7+7vHWNCo6F3vW1LK36mfdwNYEvhg2edJRkW1kr9flkJCjCj
 Hhe2nIQmPQFJkeI/NkccowJRs5onwv3UIuPqOuAhx49XiI/a1aJKD0Md9ljeCJKd
 HOybAltDiYMHVBwWGtdednMbPNvHSlsjRby4PRGdmLBsOlgjaihosx/5Byx80JP3
 CNNJVm712qgMh6VbG9FIJ0rCKmXO3LxsVraptosK271+uZqWeHB0+yJnsLXWje2M
 kY6YYVLtnc4j4eOeFgX7RQqagXdgZ3dc+MCVFVU6rq2WIiqLycEeiMLzr/WV78O5
 wA0iX8Z7m+hkYPAEcbvt6Uhf0/KbeFlhb6dMGg2uE0ISgdCpXhpw1s4AeOQTKKuv
 vClzMPSXYkStD58CiYlUFqo01qoOvFVuPSLUa8ZbU5TMTYrwpcNX8FYXCEjz0tfc
 j7PbUy9YvA==
 =/MDi
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:

 - Convert various DT (non-binding) doc files to ReST

 - Various improvements to device link code

 - Fix __of_attach_node_sysfs refcounting bug

 - Add support for 'memory-region-names' with reserved-memory binding

 - Vendor prefixes for Protonic Holland, BeagleBoard.org, Alps, Check
   Point, Würth Elektronik, U-Boot, Vaisala, Baikal Electronics,
   Shanghai Awinic Technology Co., MikroTik, Silex Insight

 - A bunch more binding conversions to DT schema. Only 3K to go.

 - Add a minimum version check for schema tools

 - Treewide dropping of 'allOf' usage with schema references. Not needed
   in new json-schema spec.

 - Some formatting clean-ups of schemas

* tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (194 commits)
  dt-bindings: clock: Add documentation for X1830 bindings.
  dt-bindings: mailbox: Convert imx mu to json-schema
  dt-bindings: power: Convert imx gpcv2 to json-schema
  dt-bindings: power: Convert imx gpc to json-schema
  dt-bindings: Merge gpio-usb-b-connector with usb-connector
  dt-bindings: timer: renesas: cmt: Convert to json-schema
  dt-bindings: clock: Convert i.MX8QXP LPCG to json-schema
  dt-bindings: timer: Convert i.MX GPT to json-schema
  dt-bindings: thermal: rcar-thermal: Add device tree support for r8a7742
  dt-bindings: serial: Add binding for UART pin swap
  dt-bindings: geni-se: Add interconnect binding for GENI QUP
  dt-bindings: geni-se: Convert QUP geni-se bindings to YAML
  dt-bindings: vendor-prefixes: Add Silex Insight vendor prefix
  dt-bindings: input: touchscreen: edt-ft5x06: change reg property
  dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver
  dt-bindings: timer: renesas: mtu2: Convert to json-schema
  of/fdt: Remove redundant kbasename function call
  dt-bindings: clock: Convert i.MX1 clock to json-schema
  dt-bindings: clock: Convert i.MX21 clock to json-schema
  dt-bindings: clock: Convert i.MX25 clock to json-schema
  ...
 2020-06-04 20:11:25 -07:00
Linus Torvalds
9d71d3cd9e ARM: DT changes for v5.8 
This is the set of device tree changes, mostly covering new
 hardware support, with 577 patches touching a little over 500
 files.
 
 There are five new Arm SoCs supported in this release, all of
 them for existing SoC families:
 
  - Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in
    both NAS devices and Android Set-top-box designs, along
    with the "Horseradish", "Lion Skin" and "Mjolnir" reference
    platforms; the Mele X1000 and Xnano X5 set-top-boxes and
    the Banana Pi BPi-M4 single-board computer.
 
  - Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC
    and the iW-RainboW-G21D-Qseven-RZG1H board/SoM
 
  - Rockchips RK3326 -- low-end 64-bit SoC along with the
    Odroid-GO Advance game console
 
 Newly added machines on already supported SoCs are:
 
  - AMLogic S905D based Smartlabs SML-5442TW TV box
 
  - AMLogic S905X3 based ODROID-C4 SBC
 
  - AMLogic S922XH based Beelink GT-King Pro TV box
 
  - Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC
 
  - Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2"
    and YADRO OpenPower P9 "Nicole"
 
  - Marvell Kirkwood based Check Point L-50 router
 
  - Mediatek MT8173 based Elm/Hana Chromebook laptops
 
  - Microchip SAMA5D2 "Industrial Connectivity Platform"
    reference board
 
  - NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit
 
  - Octavo OSDMP15x based Linux Automation MC-1 development board
 
  - Qualcomm SDM630 based Xiaomi Redmi Note 7 phone
 
  - Realtek RTD1295 based Xnano X5 TV Box
 
  - STMicroelectronics STM32MP1 based Stinger96 single-board
    computer and IoT Box
 
  - Samsung Exynos4210 based based Samsung Galaxy S2 phone
 
  - Socionext Uniphier based Akebi96 SBC
 
  - TI Keystone based K2G Evaluation board
 
  - TI am5729 based Beaglebone-AI development board
 
 Include device descriptions for additional hardware support in existing
 SoCs and machines based on all major SoC platforms:
 
  - AMlogic Meson
 
  - Allwinner sunxi
 
  - Arm Juno/VFP/Vexpress/Integrator
 
  - Broadcom bcm283x/bcm2711
 
  - Hisilicon hi6220
 
  - Marvell EBU
 
  - Mediatek MT27xx, MT76xx, MT81xx and MT67xx
 
  - Microchip SAMA5D2
 
  - NXP i.MX6/i.MX7/i.MX8 and Layerscape
 
  - Nvidia Tegra
 
  - Qualcomm Snapdragon
 
  - Renesas r8a77961, r8a7791
 
  - Rockchips RK32xx/RK33xx
 
  - ST-Ericsson ux500
 
  - STMicroelectronics SMT32
 
  - Samsung Exynos and S5PV210
 
  - Socionext Uniphier
 
  - TI OMAP5/DRA7 and Keystone
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl7ZWskACgkQmmx57+YA
 GNl60xAAtW8fmOerc1JvUSNZFN6PApVexhNUDPnc0Wytzsi67v9KKTz7CNxEaO6z
 o466PfCObhi8IlLa1NmJxhSRXjv84JnbUODkiLeWhpX3HWE4rWhVz+/+gukmIah4
 H8Q3ehLyatgsGopXwBWShKoQmls2H4v9ETxKwx60Yj/HKqZeay7SLmLXbZ0SvFmZ
 5kkROmXiFg5iWjtALuibJWCsG1o5Hsfl8JMiPsr3W+O2hTmm4AvJ3ESkCFeqqJ1M
 ccxTEaFhakM/U6xujQYG/mSbRox6mnxZukYzQLh+K0ccP7yvS5J90GOE3B7hNDFy
 qZiB6hfrX6Rmcr7k0nhAzTDOOfHF+DmikGTKh9BvpOenklhHu9AYQlZwh5gK3Svw
 G5T3mAKMd3YF4ywJHNUKtzVPp/Q786CXq08PdAY+tDiLo02UIR5WjOQ9at2JJKDG
 bfUQClyii+EtOqgOTmIPH2yUsYgVsbbv4F7SPk/c4BEn5od9a+bLoIne7yu8sy6M
 IdW8klUtoswzmH9lGlOjUic4pMrRVY+8gSgtETSF0sePoapcQUJg6gEEygvj4H36
 BWFVHJK0WGQ2PWb3HHqRa20PJ92Jn65p1uK0eox4qkxd24KgpV6l2aAfx7FMUw47
 vqxb59ogFsC+XIZ5OSG0fYfejnwgfTSJLodrJrk9UdvXb6nwo/Q=
 =17kt
 -----END PGP SIGNATURE-----

Merge tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Arnd Bergmann:
 "This is the set of device tree changes, mostly covering new hardware
  support, with 577 patches touching a little over 500 files.

  There are five new Arm SoCs supported in this release, all of them for
  existing SoC families:

   - Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in both NAS
     devices and Android Set-top-box designs, along with the
     "Horseradish", "Lion Skin" and "Mjolnir" reference platforms; the
     Mele X1000 and Xnano X5 set-top-boxes and the Banana Pi BPi-M4
     single-board computer.

   - Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC and
     the iW-RainboW-G21D-Qseven-RZG1H board/SoM

   - Rockchips RK3326 -- low-end 64-bit SoC along with the Odroid-GO
     Advance game console

  Newly added machines on already supported SoCs are:

   - AMLogic S905D based Smartlabs SML-5442TW TV box

   - AMLogic S905X3 based ODROID-C4 SBC

   - AMLogic S922XH based Beelink GT-King Pro TV box

   - Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC

   - Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2" and YADRO
     OpenPower P9 "Nicole"

   - Marvell Kirkwood based Check Point L-50 router

   - Mediatek MT8173 based Elm/Hana Chromebook laptops

   - Microchip SAMA5D2 "Industrial Connectivity Platform" reference
     board

   - NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit

   - Octavo OSDMP15x based Linux Automation MC-1 development board

   - Qualcomm SDM630 based Xiaomi Redmi Note 7 phone

   - Realtek RTD1295 based Xnano X5 TV Box

   - STMicroelectronics STM32MP1 based Stinger96 single-board computer
     and IoT Box

   - Samsung Exynos4210 based based Samsung Galaxy S2 phone

   - Socionext Uniphier based Akebi96 SBC

   - TI Keystone based K2G Evaluation board

   - TI am5729 based Beaglebone-AI development board

  Include device descriptions for additional hardware support in
  existing SoCs and machines based on all major SoC platforms:

   - AMlogic Meson

   - Allwinner sunxi

   - Arm Juno/VFP/Vexpress/Integrator

   - Broadcom bcm283x/bcm2711

   - Hisilicon hi6220

   - Marvell EBU

   - Mediatek MT27xx, MT76xx, MT81xx and MT67xx

   - Microchip SAMA5D2

   - NXP i.MX6/i.MX7/i.MX8 and Layerscape

   - Nvidia Tegra

   - Qualcomm Snapdragon

   - Renesas r8a77961, r8a7791

   - Rockchips RK32xx/RK33xx

   - ST-Ericsson ux500

   - STMicroelectronics SMT32

   - Samsung Exynos and S5PV210

   - Socionext Uniphier

   - TI OMAP5/DRA7 and Keystone"

* tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (564 commits)
  ARM: dts: keystone: Rename "msmram" node to "sram"
  arm: dts: mt2712: add uart APDMA to device tree
  arm64: dts: mt8183: add mmc node
  arm64: dts: mt2712: add ethernet device node
  arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1
  ARM: dts: mmp3: Add the fifth SD HCI
  ARM: dts: berlin*: Fix up the SDHCI node names
  ARM: dts: mmp3: Fix USB & USB PHY node names
  ARM: dts: mmp3: Fix L2 cache controller node name
  ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property
  ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property
  ARM: dts: pxa910: Fix the gpio interrupt cell number
  ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property
  ARM: dts: pxa168: Fix the gpio interrupt cell number
  ARM: dts: pxa168: Add missing address/size cells to i2c nodes
  ARM: dts: dove: Fix interrupt controller node name
  ARM: dts: kirkwood: Fix interrupt controller node name
  arm64: dts: Add SC9863A emmc and sd card nodes
  arm64: dts: Add SC9863A clock nodes
  arm64: dts: mt6358: add PMIC MT6358 related nodes
  ...
 2020-06-04 20:02:14 -07:00
Linus Torvalds
828f3e18e1 ARM/SoC: drivers for v5.7 
These are updates to SoC specific drivers that did not have
 another subsystem maintainer tree to go through for some
 reason:
 
 - Some bus and memory drivers for the MIPS P5600 based
   Baikal-T1 SoC that is getting added through the MIPS tree.
 
 - There are new soc_device identification drivers for TI K3,
   Qualcomm MSM8939
 
 - New reset controller drivers for NXP i.MX8MP, Renesas
   RZ/G1H, and Hisilicon hi6220
 
 - The SCMI firmware interface can now work across ARM SMC/HVC
   as a transport.
 
 - Mediatek platforms now use a new driver for their "MMSYS"
   hardware block that controls clocks and some other aspects
   in behalf of the media and gpu drivers.
 
 - Some Tegra processors have improved power management
   support, including getting woken up by the PMIC and cluster
   power down during idle.
 
 - A new v4l staging driver for Tegra is added.
 
 - Cleanups and minor bugfixes for TI, NXP, Hisilicon,
   Mediatek, and Tegra.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl7XvgAACgkQmmx57+YA
 GNmj/hAAnAJ/hYehLfgCe711HUntgeRkaoTVpCt8BJNMdxsa23sn3V6k5+WYn1uG
 PtlgpefZEMHLUEEVDegR4nZXLG0Pzu1SR12KW34YPcQKkNo/+vlQ9zYUajnJ/KX6
 10zdLSIzHfk1VtXKvvQQ8xFyE+S/trGmjC57E6gfoCUT3rl1maD+ccVXUBaz9oob
 wuMxGXQAl57mio5yT1OfSk6Fev39xRE2dN1hzP7KUYhsemZajBwBBW5wVJZCsCB8
 LCGmxVkavM7BV4r2NokbBDs5rlfedBl/P/IPd9Is5a5tuGUkSsVRG9zqShxYLGM3
 S06az6POQFwXKFJoUKW0dK/Koy0D7BK+vhUBPzFv4HZ8iDCVf6Jju2MJ02GMqHPj
 OOrXaCbLYrvN/edVUWeeFywqwMbYTRwC4DxyTq5m7HxEB004xTOhs0rX5aR0u4n1
 bbsR97LguolwH9iEMzd3F3jCiKBcMecH3lAh5WcrtwlFIRrNhbWoGDoA/4TuORFS
 b11rgsTRIJ5Vc++D1HnSnx0ZZvUzyluMvygdALnSgVah6xYe6KVw9Kg/wioAJ04G
 uSTidqP3qRhsyET2HQo7CxdVfZbKfP25iKCKrdhQziztKvhF8qrUmZKloXOodRw+
 ewYSRmv8c324OYYit1X43oAdW8dntq1XbSIauaqxEb4JC7x/xRY=
 =44Jc
 -----END PGP SIGNATURE-----

Merge tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM/SoC driver updates from Arnd Bergmann:
 "These are updates to SoC specific drivers that did not have another
  subsystem maintainer tree to go through for some reason:

   - Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC
     that is getting added through the MIPS tree.

   - There are new soc_device identification drivers for TI K3, Qualcomm
     MSM8939

   - New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and
     Hisilicon hi6220

   - The SCMI firmware interface can now work across ARM SMC/HVC as a
     transport.

   - Mediatek platforms now use a new driver for their "MMSYS" hardware
     block that controls clocks and some other aspects in behalf of the
     media and gpu drivers.

   - Some Tegra processors have improved power management support,
     including getting woken up by the PMIC and cluster power down
     during idle.

   - A new v4l staging driver for Tegra is added.

   - Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and
     Tegra"

* tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits)
  clk: sprd: fix compile-testing
  bus: bt1-axi: Build the driver into the kernel
  bus: bt1-apb: Build the driver into the kernel
  bus: bt1-axi: Use sysfs_streq instead of strncmp
  bus: bt1-axi: Optimize the return points in the driver
  bus: bt1-apb: Use sysfs_streq instead of strncmp
  bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method
  bus: bt1-apb: Fix show/store callback identations
  bus: bt1-apb: Include linux/io.h
  dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding
  memory: Add Baikal-T1 L2-cache Control Block driver
  bus: Add Baikal-T1 APB-bus driver
  bus: Add Baikal-T1 AXI-bus driver
  dt-bindings: bus: Add Baikal-T1 APB-bus binding
  dt-bindings: bus: Add Baikal-T1 AXI-bus binding
  staging: tegra-video: fix V4L2 dependency
  tee: fix crypto select
  drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static
  soc: ti: add k3 platforms chipid module driver
  dt-bindings: soc: ti: add binding for k3 platforms chipid module
  ...
 2020-06-04 19:56:20 -07:00
Linus Torvalds
694b5a5d31 ARM: SoC changes for v5.8 
One new platform gets added, the Realtek RTD1195, which is an older
 Cortex-a7 based relative of the RTD12xx chips that are already supported
 in arch/arm64. The platform may also be extended to support running
 32-bit kernels on those 64-bit chips for memory-constrained machines.
 
 In the Renesas shmobile platform, we gain support for "RZ/G1H" or R8A7742,
 an eight-core chip based on Cortex-A15 and Cortex-A7 cores, originally
 released in 2016 as one of the last high-end 32-bit designs.
 
 There is ongoing cleanup for the integrator, tegra, imx, and omap2
 platforms, with integrator getting very close to the goal of having
 zero code in arch/arm/, and omap2 moving more of the chip specifics
 from old board code into device tree files.
 
 The Versatile Express platform is made more modular, with built-in
 drivers now becoming loadable modules. This is part of a greater effort
 for the Android OS to have a common kernel binary for all platforms and
 any platform specific code in loadable modules.
 
 The PXA platform drops support for Compulab's pxa2xx boards that had
 rather unusual flash and PCI drivers but no known users remaining.
 All device drivers specific to those boards can now get removed as
 well.
 
 Across platforms, there is ongoing cleanup, with Geert and Rob
 revisiting some a lot of Kconfig options.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl7XvmAACgkQmmx57+YA
 GNk4vRAAs3TxlwLAUk5dknAi+UstlviNPG/ys6mViFuLqktPyhkA/v6nFOBI5Ldf
 8xAsaSk3+oAX3Dd7aTaudl5WMFWFtzT5xA4gEI7CBZrBaAL0BVns1JfnVxpPRIcF
 B09Sb3wv7++E/+AxYcoVLWd5wkc9tlMesrIV5FPHHasOp3rRjVI0cExXnXzqJU8M
 TbwrWEOczZNVAm2q4Eh1ttbuSIvPd3s4NMnI755MRSQ7u/rYFSPf6Ay8/eFTqx1e
 0SMWHRmrGeP6yhLy7+Li0x0jsK3ReZ9SkLXp3iEZ9huKbBTHIPBUeBB1RMnCYGe+
 M2OL+9ySSe9UI9sjvsLGPDAnJaZI/UDUOVhatZCTvYB7CZY5nYNrYp+heYFONWm6
 Up3e1t2iGPbgs8/1y78a9YPxAdsW0iavRtjVUYb+nwX+savYZgSBATA1pZqLc317
 5FAGmTh//OLKYBSjfAxu9H8aInJPZA595lUiPHEQujzZH5Xz0QNtv4dapeNL2I4g
 LO20PMvuEgmwlwj/Npnwdl0UQK3ztoeR2upCrk91VwtNWGiOWTzCMT/OkYAAjKuo
 QYMGu3UvbbTCHPsIdrUz8gZ2T3VnJoeE3ldny2QbNAtVdpH/F8htJcilrBbyv1vI
 IKB1oogf5zfUwXVwZRxCfI9s5hELUlAKMGTtNcybzdsKpN5xtTo=
 =gzCp
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC updates from Arnd Bergmann:
 "One new platform gets added, the Realtek RTD1195, which is an older
  Cortex-a7 based relative of the RTD12xx chips that are already
  supported in arch/arm64. The platform may also be extended to support
  running 32-bit kernels on those 64-bit chips for memory-constrained
  machines.

  In the Renesas shmobile platform, we gain support for "RZ/G1H" or
  R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores,
  originally released in 2016 as one of the last high-end 32-bit
  designs.

  There is ongoing cleanup for the integrator, tegra, imx, and omap2
  platforms, with integrator getting very close to the goal of having
  zero code in arch/arm/, and omap2 moving more of the chip specifics
  from old board code into device tree files.

  The Versatile Express platform is made more modular, with built-in
  drivers now becoming loadable modules. This is part of a greater
  effort for the Android OS to have a common kernel binary for all
  platforms and any platform specific code in loadable modules.

  The PXA platform drops support for Compulab's pxa2xx boards that had
  rather unusual flash and PCI drivers but no known users remaining. All
  device drivers specific to those boards can now get removed as well.

  Across platforms, there is ongoing cleanup, with Geert and Rob
  revisiting some a lot of Kconfig options"

* tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
  ARM: omap2: fix omap5_realtime_timer_init definition
  ARM: zynq: Don't select CONFIG_ICST
  ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs
  clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE
  ARM: davinci: fix build failure without I2C
  power: reset: vexpress: fix build issue
  power: vexpress: cleanup: use builtin_platform_driver
  power: vexpress: add suppress_bind_attrs to true
  Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG"
  MAINTAINERS: pxa: remove Compulab arm/pxa support
  ARM: pxa: remove Compulab pxa2xx boards
  bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe()
  soc: imx: move cpu code to drivers/soc/imx
  ARM: imx: move cpu definitions into a header
  ARM: imx: use device_initcall for imx_soc_device_init
  ARM: imx: pcm037: make pcm970_sja1000_platform_data static
  bus: ti-sysc: Timers no longer need legacy quirk handling
  ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter
  ARM: dts: Configure system timers for omap2
  ARM: dts: Configure system timers for ti81xx
  ...
 2020-06-04 19:47:11 -07:00
Linus Torvalds
886d7de631 Merge branch 'akpm' (patches from Andrew) 
Merge yet more updates from Andrew Morton:

 - More MM work. 100ish more to go. Mike Rapoport's "mm: remove
   __ARCH_HAS_5LEVEL_HACK" series should fix the current ppc issue

 - Various other little subsystems

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (127 commits)
  lib/ubsan.c: fix gcc-10 warnings
  tools/testing/selftests/vm: remove duplicate headers
  selftests: vm: pkeys: fix multilib builds for x86
  selftests: vm: pkeys: use the correct page size on powerpc
  selftests/vm/pkeys: override access right definitions on powerpc
  selftests/vm/pkeys: test correct behaviour of pkey-0
  selftests/vm/pkeys: introduce a sub-page allocator
  selftests/vm/pkeys: detect write violation on a mapped access-denied-key page
  selftests/vm/pkeys: associate key on a mapped page and detect write violation
  selftests/vm/pkeys: associate key on a mapped page and detect access violation
  selftests/vm/pkeys: improve checks to determine pkey support
  selftests/vm/pkeys: fix assertion in test_pkey_alloc_exhaust()
  selftests/vm/pkeys: fix number of reserved powerpc pkeys
  selftests/vm/pkeys: introduce powerpc support
  selftests/vm/pkeys: introduce generic pkey abstractions
  selftests: vm: pkeys: use the correct huge page size
  selftests/vm/pkeys: fix alloc_random_pkey() to make it really random
  selftests/vm/pkeys: fix assertion in pkey_disable_set/clear()
  selftests/vm/pkeys: fix pkey_disable_clear()
  selftests: vm: pkeys: add helpers for pkey bits
  ...
 2020-06-04 19:18:29 -07:00
Anshuman Khandual
399145f9eb mm/debug: add tests validating architecture page table helpers 
This adds tests which will validate architecture page table helpers and
other accessors in their compliance with expected generic MM semantics.
This will help various architectures in validating changes to existing
page table helpers or addition of new ones.

This test covers basic page table entry transformations including but not
limited to old, young, dirty, clean, write, write protect etc at various
level along with populating intermediate entries with next page table page
and validating them.

Test page table pages are allocated from system memory with required size
and alignments.  The mapped pfns at page table levels are derived from a
real pfn representing a valid kernel text symbol.  This test gets called
via late_initcall().

This test gets built and run when CONFIG_DEBUG_VM_PGTABLE is selected.
Any architecture, which is willing to subscribe this test will need to
select ARCH_HAS_DEBUG_VM_PGTABLE.  For now this is limited to arc, arm64,
x86, s390 and powerpc platforms where the test is known to build and run
successfully Going forward, other architectures too can subscribe the test
after fixing any build or runtime problems with their page table helpers.

Folks interested in making sure that a given platform's page table helpers
conform to expected generic MM semantics should enable the above config
which will just trigger this test during boot.  Any non conformity here
will be reported as an warning which would need to be fixed.  This test
will help catch any changes to the agreed upon semantics expected from
generic MM and enable platforms to accommodate it thereafter.

[anshuman.khandual@arm.com: v17]
  Link: http://lkml.kernel.org/r/1587436495-22033-3-git-send-email-anshuman.khandual@arm.com
[anshuman.khandual@arm.com: v18]
  Link: http://lkml.kernel.org/r/1588564865-31160-3-git-send-email-anshuman.khandual@arm.com
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>	[s390]
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr>	[ppc32]
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Link: http://lkml.kernel.org/r/1583919272-24178-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-06-04 19:06:21 -07:00
Andrey Konovalov
5ff3b30ab5 kcov: collect coverage from interrupts 
This change extends kcov remote coverage support to allow collecting
coverage from soft interrupts in addition to kernel background threads.

To collect coverage from code that is executed in softirq context, a part
of that code has to be annotated with kcov_remote_start/stop() in a
similar way as how it is done for global kernel background threads.  Then
the handle used for the annotations has to be passed to the
KCOV_REMOTE_ENABLE ioctl.

Internally this patch adjusts the __sanitizer_cov_trace_pc() compiler
inserted callback to not bail out when called from softirq context.
kcov_remote_start/stop() are updated to save/restore the current per task
kcov state in a per-cpu area (in case the softirq came when the kernel was
already collecting coverage in task context).  Coverage from softirqs is
collected into pre-allocated per-cpu areas, whose size is controlled by
the new CONFIG_KCOV_IRQ_AREA_SIZE.

[andreyknvl@google.com: turn current->kcov_softirq into unsigned int to fix objtool warning]
  Link: http://lkml.kernel.org/r/841c778aa3849c5cb8c3761f56b87ce653a88671.1585233617.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Marco Elver <elver@google.com>
Link: http://lkml.kernel.org/r/469bd385c431d050bc38a593296eff4baae50666.1584655448.git.andreyknvl@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-06-04 19:06:20 -07:00
Linus Torvalds
15a2bc4dbb Merge branch 'exec-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace 
Pull execve updates from Eric Biederman:
 "Last cycle for the Nth time I ran into bugs and quality of
  implementation issues related to exec that could not be easily be
  fixed because of the way exec is implemented. So I have been digging
  into exec and cleanup up what I can.

  I don't think I have exec sorted out enough to fix the issues I
  started with but I have made some headway this cycle with 4 sets of
  changes.

   - promised cleanups after introducing exec_update_mutex

   - trivial cleanups for exec

   - control flow simplifications

   - remove the recomputation of bprm->cred

  The net result is code that is a bit easier to understand and work
  with and a decrease in the number of lines of code (if you don't count
  the added tests)"

* 'exec-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (24 commits)
  exec: Compute file based creds only once
  exec: Add a per bprm->file version of per_clear
  binfmt_elf_fdpic: fix execfd build regression
  selftests/exec: Add binfmt_script regression test
  exec: Remove recursion from search_binary_handler
  exec: Generic execfd support
  exec/binfmt_script: Don't modify bprm->buf and then return -ENOEXEC
  exec: Move the call of prepare_binprm into search_binary_handler
  exec: Allow load_misc_binary to call prepare_binprm unconditionally
  exec: Convert security_bprm_set_creds into security_bprm_repopulate_creds
  exec: Factor security_bprm_creds_for_exec out of security_bprm_set_creds
  exec: Teach prepare_exec_creds how exec treats uids & gids
  exec: Set the point of no return sooner
  exec: Move handling of the point of no return to the top level
  exec: Run sync_mm_rss before taking exec_update_mutex
  exec: Fix spelling of search_binary_handler in a comment
  exec: Move the comment from above de_thread to above unshare_sighand
  exec: Rename flush_old_exec begin_new_exec
  exec: Move most of setup_new_exec into flush_old_exec
  exec: In setup_new_exec cache current in the local variable me
  ...
 2020-06-04 14:07:08 -07:00
Linus Torvalds
9ff7258575 Merge branch 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace 
Pull proc updates from Eric Biederman:
 "This has four sets of changes:

   - modernize proc to support multiple private instances

   - ensure we see the exit of each process tid exactly

   - remove has_group_leader_pid

   - use pids not tasks in posix-cpu-timers lookup

  Alexey updated proc so each mount of proc uses a new superblock. This
  allows people to actually use mount options with proc with no fear of
  messing up another mount of proc. Given the kernel's internal mounts
  of proc for things like uml this was a real problem, and resulted in
  Android's hidepid mount options being ignored and introducing security
  issues.

  The rest of the changes are small cleanups and fixes that came out of
  my work to allow this change to proc. In essence it is swapping the
  pids in de_thread during exec which removes a special case the code
  had to handle. Then updating the code to stop handling that special
  case"

* 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  proc: proc_pid_ns takes super_block as an argument
  remove the no longer needed pid_alive() check in __task_pid_nr_ns()
  posix-cpu-timers: Replace __get_task_for_clock with pid_for_clock
  posix-cpu-timers: Replace cpu_timer_pid_type with clock_pid_type
  posix-cpu-timers: Extend rcu_read_lock removing task_struct references
  signal: Remove has_group_leader_pid
  exec: Remove BUG_ON(has_group_leader_pid)
  posix-cpu-timer:  Unify the now redundant code in lookup_task
  posix-cpu-timer: Tidy up group_leader logic in lookup_task
  proc: Ensure we see the exit of each process tid exactly once
  rculist: Add hlists_swap_heads_rcu
  proc: Use PIDTYPE_TGID in next_tgid
  Use proc_pid_ns() to get pid_namespace from the proc superblock
  proc: use named enums for better readability
  proc: use human-readable values for hidepid
  docs: proc: add documentation for "hidepid=4" and "subset=pid" options and new mount behavior
  proc: add option to mount only a pids subset
  proc: instantiate only pids that we can ptrace on 'hidepid=4' mount option
  proc: allow to mount many instances of proc in one pid namespace
  proc: rename struct proc_fs_info to proc_fs_opts
 2020-06-04 13:54:34 -07:00
Linus Torvalds
9fb4c5250f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching 
Pull livepatching updates from Jiri Kosina:

 - simplifications and improvements for issues Peter Ziljstra found
   during his previous work on W^X cleanups.

   This allows us to remove livepatch arch-specific .klp.arch sections
   and add proper support for jump labels in patched code.

   Also, this patchset removes the last module_disable_ro() usage in the
   tree.

   Patches from Josh Poimboeuf and Peter Zijlstra

 - a few other minor cleanups

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  MAINTAINERS: add lib/livepatch to LIVE PATCHING
  livepatch: add arch-specific headers to MAINTAINERS
  livepatch: Make klp_apply_object_relocs static
  MAINTAINERS: adjust to livepatch .klp.arch removal
  module: Make module_enable_ro() static again
  x86/module: Use text_mutex in apply_relocate_add()
  module: Remove module_disable_ro()
  livepatch: Remove module_disable_ro() usage
  x86/module: Use text_poke() for late relocations
  s390/module: Use s390_kernel_write() for late relocations
  s390: Change s390_kernel_write() return type to match memcpy()
  livepatch: Prevent module-specific KLP rela sections from referencing vmlinux symbols
  livepatch: Remove .klp.arch
  livepatch: Apply vmlinux-specific KLP relocations early
  livepatch: Disallow vmlinux.ko
 2020-06-04 11:13:03 -07:00
Linus Torvalds
631d691408 sound updates for 5.8-rc1 
It was another busy development cycle, and the majority of changes
 are found in ASoC side.  Below are Some highlights.
 
 ASoC core:
 - Lots of core cleanups and refactorings, still on-going work by
   Morimoto-san
 
 ASoC drivers:
 - Continued work on cleaning up and improving the Intel SOF stuff,
   along with new platform support including SoundWire
 - Fixes to make the Marvell SSPA driver work upstream
 - Support for AMD Renoir ACP, Dialog DA7212, Freescale EASRC and
   i.MX8M, Intel Elkhard Lake, Maxim MAX98390, Nuvoton NAU8812 and
   NAU8814 and Realtek RT1016.
 
 USB-audio:
 - Improvement for sync and implicit feedback streams with the more
   accurate frame size calculation and full-duplex support
 - Support for RME Babyface Pro and Prioneer DJ DJM
 
 HD-audio:
 - Fixes for Mic mute LED on HP machines
 - Re-enable support of Intel SST driver for SKL/KBL platforms
 
 FireWire:
 - Lots of refactoring, add support for RME FireFace and MOTU
   UltraLite-mk3
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAl7Y3HAOHHRpd2FpQHN1
 c2UuZGUACgkQLtJE4w1nLE95NA//YzYnCmwyir4tY5M9uiN2Mqu/JZkqmJmQH+MB
 xt0J7RYeYcxDasCKU1ibi8U3qGmSyF58DuFmkWsaVvDFqGKOpcXh6HZRhzXt4qng
 14c7zUW1T/7HWdGoRqySIP27Xtwb72o1g8ZriG+8vop/I4OsG2qj5KaVIdRHVvoL
 Nbciyiauv7/Ad1U/pULTjP/tDR7VtbNXrFcAMFXAdAo9swvo9mcRDzkMdwaOz2Ex
 z+qMhK/y07Lf1IcPH8ruFmth7nCVLQ3YTp6vGCJKDU8/d8yW+NfEnHZVYq1rJwvT
 iUC2NmNPl/R4kWIOGK+QuWQzOv1/pme2A4VWSznEQDZ97BYL5+TzvXMu0XbAr1SV
 T9eo82EJM1AYiBEIbxdTUQhidbGz7mmP4iTAykGNKlrwjk6n7TXmOcUE8TqAK2qm
 CWEeNJKqjUEQxmB9ad4MMSs02zhzM2inyPNREZwr5d/isJEPrtOC+djG+0yBtmiv
 KgcVYUFfZ1WXLd5Q20S0KVYCTB5f20ZfMrtExbMqdeHoXWQRZpMmSFFnKslfFKX6
 /jHqHfsmLVV83QRL1Ldr/UNP7HKPrlSSulUFqZ4BKjgIkz1DpRFtqIoseb8geJj3
 YSpV8i6sxM3OgKPZTaOWXYGED+/5V3w+HDLSN3kGECGy6ex/Y0Hpd8U3W95IxmOs
 y1x9fbo=
 =E+d+
 -----END PGP SIGNATURE-----

Merge tag 'sound-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "It was another busy development cycle, and the majority of changes are
  found in ASoC side. Below are Some highlights.

  ASoC core:
   - Lots of core cleanups and refactorings, still on-going work by
     Morimoto-san

  ASoC drivers:
   - Continued work on cleaning up and improving the Intel SOF stuff,
     along with new platform support including SoundWire

   - Fixes to make the Marvell SSPA driver work upstream

   - Support for AMD Renoir ACP, Dialog DA7212, Freescale EASRC and
     i.MX8M, Intel Elkhard Lake, Maxim MAX98390, Nuvoton NAU8812 and
     NAU8814 and Realtek RT1016.

  USB-audio:
   - Improvement for sync and implicit feedback streams with the more
     accurate frame size calculation and full-duplex support

   - Support for RME Babyface Pro and Prioneer DJ DJM

  HD-audio:
   - Fixes for Mic mute LED on HP machines

   - Re-enable support of Intel SST driver for SKL/KBL platforms

  FireWire:
   - Lots of refactoring, add support for RME FireFace and MOTU
     UltraLite-mk3"

* tag 'sound-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (428 commits)
  ALSA: es1688: Add the missed snd_card_free()
  ALSA: hda: add sienna_cichlid audio asic id for sienna_cichlid up
  ALSA: usb-audio: Add Pioneer DJ DJM-900NXS2 support
  ASoC: qcom: q6asm-dai: kCFI fix
  ASoC: soc-card: add snd_soc_card_remove_dai_link()
  ASoC: soc-card: add snd_soc_card_add_dai_link()
  ASoC: soc-card: add snd_soc_card_set_bias_level_post()
  ASoC: soc-card: add snd_soc_card_set_bias_level()
  ASoC: soc-card: add snd_soc_card_remove()
  ASoC: soc-card: add snd_soc_card_late_probe()
  ASoC: soc-card: add snd_soc_card_probe()
  ASoC: soc-card: add probed bit field to snd_soc_card
  ASoC: soc-card: add snd_soc_card_resume_post()
  ASoC: soc-card: add snd_soc_card_resume_pre()
  ASoC: soc-card: add snd_soc_card_suspend_post()
  ASoC: soc-card: add snd_soc_card_suspend_pre()
  ASoC: soc-card: move snd_soc_card_subclass to soc-card
  ASoC: soc-card: move snd_soc_card_get_codec_dai() to soc-card
  ASoC: soc-card: move snd_soc_card_set/get_drvdata() to soc-card
  ASoC: soc-card: move snd_soc_card_jack_new() to soc-card
  ...
 2020-06-04 11:07:38 -07:00
Linus Torvalds
86c67ce20d LEDs pull request for 5.8-rc1. 
New drivers: aw2013, sgm3140, some fixes. Nothing much to see here,
 next release should be more interesting.
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQRPfPO7r0eAhk010v0w5/Bqldv68gUCXtjlggAKCRAw5/Bqldv6
 8mi4AJ9sFTwt9zcnIB3dZcD+C9J/GtCU7ACgwlN9UsQ1qvpEG1xE0mSgLlPvebQ=
 =HymN
 -----END PGP SIGNATURE-----

Merge tag 'leds-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds

Pull LED updates from Pavel Machek:
 "New drivers: aw2013, sgm3140, some fixes

  Nothing much to see here, next release should be more interesting"

* tag 'leds-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
  leds: add aw2013 driver
  dt-bindings: leds: Add binding for aw2013
  leds: trigger: remove redundant assignment to variable ret
  leds: netxbig: Convert to use GPIO descriptors
  leds: add sgm3140 driver
  dt-bindings: leds: Add binding for sgm3140
  leds: ariel: Add driver for status LEDs on Dell Wyse 3020
  leds: pwm: check result of led_pwm_set() in led_pwm_add()
  leds: tlc591xxt: hide error on EPROBE_DEFER
  leds: tca6507: Include the right header
  leds: lt3593: Drop surplus include
  leds: lp3952: Include the right header
  leds: lm355x: Drop surplus include
 2020-06-04 11:03:45 -07:00
Bjorn Helgaas
51755de739 Merge branch 'remotes/lorenzo/pci/rcar' 
- Fix rcar OB window programming (Andrew Murray)

  - Add rcar suspend/resume support (Kazufumi Ikeda)

  - Add r8a77961 to DT binding (Yoshihiro Shimoda)

  - Rename pcie-rcar.c to pcie-rcar-host.c to make room for endpoint mode
    (Lad Prabhakar)

  - Move shareable code to pcie-rcar.c (Lad Prabhakar)

  - Correct PCIEPAMR mask calculation for "size < 128" (Lad Prabhakar)

  - Add endpoint support for multiple outbound memory windows (Lad
    Prabhakar)

  - Add R-Car PCIe endpoint driver and DT bindings (Lad Prabhakar)

* remotes/lorenzo/pci/rcar:
  MAINTAINERS: Add file patterns for rcar PCI device tree bindings
  PCI: rcar: Add endpoint mode support
  dt-bindings: PCI: rcar: Add bindings for R-Car PCIe endpoint controller
  PCI: endpoint: Add support to handle multiple base for mapping outbound memory
  PCI: endpoint: Pass page size as argument to pci_epc_mem_init()
  PCI: rcar: Fix calculating mask for PCIEPAMR register
  PCI: rcar: Move shareable code to a common file
  PCI: rcar: Rename pcie-rcar.c to pcie-rcar-host.c
  dt-bindings: pci: rcar: add r8a77961 support
  PCI: rcar: Add suspend/resume
  PCI: rcar: Fix incorrect programming of OB windows
 2020-06-04 12:59:18 -05:00
Bjorn Helgaas
210d8ea82a Merge branch 'remotes/lorenzo/pci/misc' 
- Correct MAINTAINERS typo for NXP LAYERSCAPE GEN4 (Lukas Bulwahn)

  - Make PCI endpoint doc section labels unique (Bryce Willey)

* remotes/lorenzo/pci/misc:
  Documentation: PCI: Give unique labels to sections
  MAINTAINERS: correct typo in new NXP LAYERSCAPE GEN4
 2020-06-04 12:59:17 -05:00
Bjorn Helgaas
b9fcf4910b Merge branch 'remotes/lorenzo/pci/dwc' 
- Simplify computation of msix_tbl (Jiri Slaby)

  - Make hisi_pcie_platform_ops static (Zou Wei)

  - Warn about resources above 4G (Alan Mikhak)

  - Make intel_pcie_cpu_addr() static (Jason Yan)

  - Use devm_platform_ioremap_resource_byname() to simplify code and
    improve error checking (Wei Yongjun)

  - Fix inner MSI IRQ domain registration so it doesn't confuse debugfs
    (Marc Zyngier)

  - Don't use FAST_LINK_MODE on meson (Marc Zyngier)

  - Add Socionext UniPhier Pro5 PCIe endpoint controller driver and DT
    description (Kunihiko Hayashi)

* remotes/lorenzo/pci/dwc:
  PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver
  dt-bindings: PCI: Add UniPhier PCIe endpoint controller description
  PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port
  PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link
  PCI: dwc: Fix inner MSI IRQ domain registration
  PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname()
  PCI: dwc: intel: Make intel_pcie_cpu_addr() static
  PCI: dwc: Program outbound ATU upper limit register
  PCI: dwc: Make hisi_pcie_platform_ops static
  PCI: dwc: Clean up computing of msix_tbl
 2020-06-04 12:59:15 -05:00
Bjorn Helgaas
712879510f Merge branch 'remotes/lorenzo/pci/cadence' 
- Deprecate 'cdns,max-outbound-regions' and 'cdns,no-bar-match-nbits'
    bindings in favor of deriving them from 'ranges' and 'dma-ranges'
    (Kishon Vijay Abraham I)

  - Read Vendor and Device ID as 32 bits (not 16) from DT (Kishon Vijay
    Abraham I)

* remotes/lorenzo/pci/cadence:
  PCI: cadence: Fix to read 32-bit Vendor ID/Device ID property from DT
  PCI: cadence: Remove "cdns,max-outbound-regions" DT property
  dt-bindings: PCI: cadence: Deprecate inbound/outbound specific bindings
 2020-06-04 12:59:15 -05:00
Bjorn Helgaas
a1dcc1aa6f Merge branch 'remotes/lorenzo/pci/brcmstb' 
- Assert fundamental reset on initialization (Nicolas Saenz Julienne)

  - Remove unnecessary clk_put(); devm_clk_get() handles this automatically
    (Jim Quinlan)

  - Fix outbound memory window register stride offset (Jim Quinlan)

  - Add "aspm-no-l0s" property for brcmstb and disable ASPM L0s when
    present (Jim Quinlan)

  - Add property to notify Raspberry Pi firmware of xHCI reset (Nicolas
    Saenz Julienne)

  - Add Raspberry Pi VL805 xHCI init function to trigger VL805 firmware
    load (Nicolas Saenz Julienne)

  - Wait in brcmstb probe for Raspberry Pi VL805 firmware initialization
    (Nicolas Saenz Julienne)

  - Load Raspberry Pi VL805 firmware in USB early handoff quirk (Nicolas
    Saenz Julienne)

* remotes/lorenzo/pci/brcmstb:
  USB: pci-quirks: Add Raspberry Pi 4 quirk
  PCI: brcmstb: Wait for Raspberry Pi's firmware when present
  firmware: raspberrypi: Introduce vl805 init routine
  soc: bcm2835: Add notify xHCI reset property
  PCI: brcmstb: Disable L0s component of ASPM if requested
  dt-bindings: PCI: brcmstb: New prop 'aspm-no-l0s'
  PCI: brcmstb: Fix window register offset from 4 to 8
  PCI: brcmstb: Don't clk_put() a managed clock
  PCI: brcmstb: Assert fundamental reset on initialization
 2020-06-04 12:59:14 -05:00
Linus Torvalds
0486a39a6d linux-watchdog 5.8-rc1 tag 
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iEYEABECAAYFAl7Xe/kACgkQ+iyteGJfRsqNGQCfeElXEDv9j+KHROxL94EYYoKP
 Up8AoI/Gnhfmi/WVCyrwvfdtuAbfehcN
 =72fM
 -----END PGP SIGNATURE-----

Merge tag 'linux-watchdog-5.8-rc1' of git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

 - add new arm_smc_wdt watchdog driver

 - da9062 and da9063 improvements

 - clarify documentation about stop() that became optional

 - document r8a7742 support

 - some overall fixes and improvements

* tag 'linux-watchdog-5.8-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: m54xx: Add missing include
  dt-bindings: watchdog: renesas,wdt: Document r8a7742 support
  watchdog: Fix runtime PM imbalance on error
  watchdog: riowd: remove unneeded semicolon
  watchdog: Add new arm_smc_wdt watchdog driver
  dt-bindings: watchdog: Add ARM smc wdt for mt8173 watchdog
  watchdog: imx2_wdt: update contact email
  watchdog: iTCO: fix link error
  watchdog: da9062: No need to ping manually before setting timeout
  watchdog: da9063: Make use of pre-configured timeout during probe
  watchdog: da9062: Initialize timeout during probe
  watchdog: clarify that stop() is optional
  watchdog: imx_sc_wdt: Fix reboot on crash
  watchdog: ts72xx_wdt: fix build error
 2020-06-04 10:50:22 -07:00
Linus Torvalds
302d5b3321 - Core Frameworks 
- Add backlight_device_get_by_name() to the API
 
 - New Device Support
    - Add support for WLED5 to Qualcomm WLED
 
  - Fix-ups
    - Convert to GPIO descriptors; l4f00242t03
    - Device Tree fix-ups; qcom-wled
 
  - Bug Fixes
    - Properly disable regulators on .probe() failure
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAl7XZbwACgkQUa+KL4f8
 d2FvuA//bkTfuewuIz8KEAjpDRftXqvhroq5++kzvziYCcleQzk1SytpaCUXxw20
 Cn/sEXzdmzDbfwvZI9X+Ptsg3rf+MzP3dXc6azkmcYRP8gGdAJ7Tz4lH9Y9pH3lk
 AckZO4FWnmQ5a9KEPxhW+FZwwCeMH0DZd2eXUpgD+GwZePDi7TmdNWcaD7nhsaRd
 14DTce1I0ZJrV39KcOXZbx80v6l6b8jtiIjYLPVS9wQx4KiGoHlPERztEANDakIp
 FDexk4smP+wfFQuhcYunNB31ZzTE50uT1SsilMOoIs0OIgPt/dfDr2DiRN8wp2Rv
 5kSXO1qou3KNRFTvn1WqfWXBQmmJRQfZUvQypppMHbzx48xlAbStQF1h9eYod6EU
 J8EoO/EbyOPNXc7do0NKwnfNvdz1tmI9Qpj4Hz3T9C9spzQ9FPU3G+5VsdB/Rv5G
 B2AJAOG/GJqILDG8hLJ0ZaFYArmLyQCFbJhaRtvPqOSMmlWKgeFdSC8AzSNhf6EC
 3Xkk4f5toKao7lgcEOWRbVYKVsdjSSxr4pwyW5VNi5XfR1DsKQj8gyCf5qrmasQE
 11v8juUP/R/6XrHvCco0zgMlVk7k/O0IQ9k0ozRKqGBtz+UKN28EzsuV/TJ0qIVN
 UTwNoKuh9QixnTRb9Jnfl3EioFIv7JjXQVpLPhj+sGInjKv3y4Y=
 =sHzj
 -----END PGP SIGNATURE-----

Merge tag 'backlight-next-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight

Pull backlight updates from Lee Jones:
 "Core Framework:
   - Add backlight_device_get_by_name() to the API

  New Device Support:
   - Add support for WLED5 to Qualcomm WLED

  Fix-ups:
   - Convert to GPIO descriptors in l4f00242t03
   - Device Tree fix-ups for qcom-wled

  Bug Fixes:
   - Properly disable regulators on .probe() failure"

* tag 'backlight-next-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: Add backlight_device_get_by_name()
  backlight: qcom-wled: Add support for WLED5 peripheral that is present on PM8150L PMICs
  dt-bindings: backlight: qcom-wled: Add WLED5 bindings
  backlight: qcom-wled: Add callback functions
  dt-bindings: backlight: qcom-wled: Convert the wled bindings to .yaml format
  backlight: l4f00242t03: Convert to GPIO descriptors
  backlight: lp855x: Ensure regulators are disabled on probe failure
 2020-06-04 10:43:07 -07:00
Linus Torvalds
512b7d37ee - Core Frameworks 
- Constify 'properties' attribute in core header file
 
  - New Drivers
    - Add support for Gateworks System Controller
    - Add support for MediaTek MT6358 PMIC
    - Add support for Mediatek MT6360 PMIC
    - Add support for Monolithic Power Systems MP2629 ADC and Battery charger
    - Rework Intel's SCU IPC collection
      - Eliminate near duplicate IPC functionality
      - Split out MFD related activities into a dedicated MFD driver
 
  - Fix-ups
    - Use new I2C API; htc-i2cpld
    - Remove superfluous code; sprd-sc27xx-spi
    - Improve error handling; stm32-timers
    - Device Tree additions/fixes; mt6397
    - Defer probe betterment; wm8994-core
    - Improve module handling; wm8994-core
    - Staticify; stpmic1
    - Trivial (spelling, formatting); tqmx86
 
  - Bug Fixes
    - Fix incorrect register/PCI IDs; intel-lpss-pci
    - Fix unbalanced Regulator API calls; wm8994-core
    - Fix double free(); wcd934x
    - Remove IRQ domain on failure; stmfx
    - Reset chip on resume; stmfx
    - Disable/enable IRQs on suspend/resume; stmfx
    - Do not use bulk writes on H/W which does not support them; max77620
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAl7XZXwACgkQUa+KL4f8
 d2FvCg/+M9ShYDptg1twDnCtMs9yAWpnTHVwTGeoAF4RkKapdAytlPfz2V8cr+jF
 5iiZM2iTRkkCdK9OQI+hPxRFXaRh3Ng6bgmzkp1VUGCT6VrcHCUmIpEcdOYnlzuY
 iLufFtXrcYGLSzfOn01jI25teeWfX4zuuNfeCWKESHAPHEZH2W5iep82s7GUP7c7
 a9IXOmQmvNYVIy7STswASI1qBcanc7MsDEN44fGZ5HbEONbFvogaQ26BUQJ+Ezc7
 YbV1QCvPFXYXvFD7S0oiAFhCEU0y1eWcrK8YUxVroGMt+Gx1FHWrDqUGFvJ5hE//
 itPr4ws9oiZHKn4xeItp7x8YVdxW6plor9h0j7NZkfVJV4/mjbPxQWpCvv3dHXKm
 NAbpeodEdxlrRdLI3HGiC6ZvIFjkUtrf+WFZoXS42F9BcxraSVxbK8LTaET4spja
 25VfswjIa3IUy1BB1eMl+Gd4LgcqIJ+FuSV6e4CCD7COhRQGEG3eyUOVNAC5Q/xI
 NcS9KhrDIayjPNZoNZPNHfiGxI+aWn4W71qMgx+t9wsDCMkjbN0xqcFaxoN/niti
 /GfaNZur/kjsewbg4oMjsjB1ytoG3saxFgWmL1XGGXJ3sxJaEyDa8iy8mhqVpj7m
 8C0g6uZiODveHRj4kn9hv1aR5AX1rTXADXrBJYvoxIU+43NWwhg=
 =746a
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Constify 'properties' attribute in core header file

  New Drivers:
   - Add support for Gateworks System Controller
   - Add support for MediaTek MT6358 PMIC
   - Add support for Mediatek MT6360 PMIC
   - Add support for Monolithic Power Systems MP2629 ADC and Battery charger

  Fix-ups:
   - Use new I2C API in htc-i2cpld
   - Remove superfluous code in sprd-sc27xx-spi
   - Improve error handling in stm32-timers
   - Device Tree additions/fixes in mt6397
   - Defer probe betterment in wm8994-core
   - Improve module handling in wm8994-core
   - Staticify in stpmic1
   - Trivial (spelling, formatting) in tqmx86

  Bug Fixes:
   - Fix incorrect register/PCI IDs in intel-lpss-pci
   - Fix unbalanced Regulator API calls in wm8994-core
   - Fix double free() in wcd934x
   - Remove IRQ domain on failure in stmfx
   - Reset chip on resume in stmfx
   - Disable/enable IRQs on suspend/resume in stmfx
   - Do not use bulk writes on H/W which does not support them in max77620"

* tag 'mfd-next-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (29 commits)
  mfd: mt6360: Remove duplicate REGMAP_IRQ_REG_LINE() entry
  mfd: Add support for PMIC MT6360
  mfd: max77620: Use single-byte writes on MAX77620
  mfd: wcd934x: Drop kfree for memory allocated with devm_kzalloc
  mfd: stmfx: Disable IRQ in suspend to avoid spurious interrupt
  mfd: stmfx: Fix stmfx_irq_init error path
  mfd: stmfx: Reset chip on resume as supply was disabled
  mfd: wm8994: Silence warning about supplies during deferred probe
  mfd: wm8994: Fix unbalanced calls to regulator_bulk_disable()
  mfd: wm8994: Fix driver operation if loaded as modules
  dt-bindings: mfd: mediatek: Add MT6397 Pin Controller
  mfd: Constify properties in mfd_cell
  mfd: stm32-timers: Use dma_request_chan() instead dma_request_slave_channel()
  mfd: sprd: Remove unnecessary spi_bus_type setting
  mfd: intel-lpss: Update LPSS UART #2 PCI ID for Jasper Lake
  mfd: tqmx86: Fix a typo in MODULE_DESCRIPTION
  mfd: stpmic1: Make stpmic1_regmap_config static
  mfd: htc-i2cpld: Convert to use i2c_new_client_device()
  MAINTAINERS: Add entry for mp2629 Battery Charger driver
  power: supply: mp2629: Add impedance compensation config
  ...
 2020-06-04 10:38:42 -07:00
Linus Torvalds
a484a497c9 Keyrings changes 
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEqG5UsNXhtOCrfGQP+7dXa6fLC2sFAl7WfNsACgkQ+7dXa6fL
 C2t5ag//Qn+FR6IGeGOig9mDE5IVqY/CUB15xjYYO28aV5bjOBFmwhFVKjbJfzX5
 jOO11pGMbVkkNavsEXxw4DA5LXXpFG7frub9DysO5xDU8dTvHB2Cov1jQOFP76Hf
 Gx91Xq0W8FE51genxy7Wp1BFxU/OPX3K1+LoE7ocDKTq5ctdZhZP8Fgr6Ip+1Tdi
 ECbRGpWP54V6+KO8RfayiEF4E7Hry+NT/5ogSbAMTHLnZyMpqjCPGxhEa11vfr/v
 ZVQ0Esp7rBJdLw6gYWf6TDYuwARiKo2LDQFQnGyvf0QUZSfDtoTdQihszHmalcBE
 Uh+6B+BlKQX8VPqsgw8yEgXqFzf8sw5WpwfeQFkS3Pn8J90R9S3q//4kNfNOgeZV
 ydqWG1VCORwm+X/8rAy8l0lXlA/JR++B7T7kvdM6Yslt5SB/4KQigS7n2tlp6+Ms
 9SwUf2GnGBJWS4kFCgEkSP6QAP9wimGkqZx+rwYytqnjCc/X18FUrRge99o2MHcs
 kHGHvok4dy/BPHap4GAoFZbfvg7LuU2SwRfNdMRB87sUi7dqqYvUiy0OGLmDuK3X
 7lvuJpmEjKkHFSUXRlV9yvvZdciJ/k+VoKOZf/oEQE4t2m0rsCQcCOlljwpLKaED
 m1dQzEq1OkgA2goCnHehR+Fkq61JWkUGrM+jbPmu8Chg9psuqIs=
 =RnLl
 -----END PGP SIGNATURE-----

Merge tag 'keys-next-20200602' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

Pull keyring updates from David Howells:

 - Fix a documentation warning.

 - Replace a zero-length array with a flexible one

 - Make the big_key key type use ChaCha20Poly1305 and use the crypto
   algorithm directly rather than going through the crypto layer.

 - Implement the update op for the big_key type.

* tag 'keys-next-20200602' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  keys: Implement update for the big_key type
  security/keys: rewrite big_key crypto to use library interface
  KEYS: Replace zero-length array with flexible-array
  Documentation: security: core.rst: add missing argument
 2020-06-04 10:27:07 -07:00
Linus Torvalds
a98f670e41 media updates for v5.8-rc1 
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAl7XUmwACgkQCF8+vY7k
 4RU4zg//fT32wiVAPHCCp+pDZVnWNeipXE1gnpqghd/qZXfzBPiLEC9sPS74VVkA
 jf1hhR33VZpKAKTPg/b074qhRZBywEOdHZnT/0CEE1oNB61shVOnyDYzLGSq95cO
 6V55ovbi5IOkrg0QEJbHpG5YHzt+pq5XeWOkqGNsHwla7N7iMGMVYfHepVVDWPnZ
 0wGYFF9cAJP+X/uxqkZLDVMA/K1I+QKh6vrj/qx53/eRt8VID3+i8ig3guk4PlUq
 7RLw5w/CywtNaGE5zaz7T3i2eoED71JHOTXi6RxdP1z8IDvELZ9mT95GQ+enlwqt
 AS6Ju1sV40wviHMv5prJWQjJkrrtYH3S907lIjwBpQLNGbh2+5crCd/6CwumkGgv
 1cCZ1dVmXpCe++9mU9AXmSkjsjGPStNcmHMOpc1Pwn9jUV3LQOOSDp8+RYdt1WHU
 Iw9cyM8NOpz5Mv/B1/ZPQ1gPb9lr1gE09XyUekxtAI/nl4nNHGWO8QDuX7Odfrv9
 8nfo14lk/p6XCTA8dsWJCgI5B1fgnqD4frHKWO9Uctppc/KBW41c8JpQUjBNlG/T
 MhtlGwYMVgSQxpQ6wK018JUAFoWkn1Sr0zMKRayqCnMjMLHsaMwE6kq+LgmRBqbB
 ersKV/9ZLYqCU1d6PhEVG6xUs6GsWdLcyhALlmHsddPSdpFXdf8=
 =KNAo
 -----END PGP SIGNATURE-----

Merge tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - Media documentation is now split into admin-guide, driver-api and
   userspace-api books (a longstanding request from Jon);

 - The media Kconfig was reorganized, in order to make easier to select
   drivers and their dependencies;

 - The testing drivers now has a separate directory;

 - added a new driver for Rockchip Video Decoder IP;

 - The atomisp staging driver was resurrected. It is meant to work with
   4 generations of cameras on Atom-based laptops, tablets and cell
   phones. So, it seems worth investing time to cleanup this driver and
   making it in good shape.

 - Added some V4L2 core ancillary routines to help with h264 codecs;

 - Added an ov2740 image sensor driver;

 - The si2157 gained support for Analog TV, which, in turn, added
   support for some cx231xx and cx23885 boards to also support analog
   standards;

 - Added some V4L2 controls (V4L2_CID_CAMERA_ORIENTATION and
   V4L2_CID_CAMERA_SENSOR_ROTATION) to help identifying where the camera
   is located at the device;

 - VIDIOC_ENUM_FMT was extended to support MC-centric devices;

 - Lots of drivers improvements and cleanups.

* tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (503 commits)
  media: Documentation: media: Refer to mbus format documentation from CSI-2 docs
  media: s5k5baf: Replace zero-length array with flexible-array
  media: i2c: imx219: Drop <linux/clk-provider.h> and <linux/clkdev.h>
  media: i2c: Add ov2740 image sensor driver
  media: ov8856: Implement sensor module revision identification
  media: ov8856: Add devicetree support
  media: dt-bindings: ov8856: Document YAML bindings
  media: dvb-usb: Add Cinergy S2 PCIe Dual Port support
  media: dvbdev: Fix tuner->demod media controller link
  media: dt-bindings: phy: phy-rockchip-dphy-rx0: move rockchip dphy rx0 bindings out of staging
  media: staging: dt-bindings: phy-rockchip-dphy-rx0: remove non-used reg property
  media: atomisp: unify the version for isp2401 a0 and b0 versions
  media: atomisp: update TODO with the current data
  media: atomisp: adjust some code at sh_css that could be broken
  media: atomisp: don't produce errs for ignored IRQs
  media: atomisp: print IRQ when debugging
  media: atomisp: isp_mmu: don't use kmem_cache
  media: atomisp: add a notice about possible leak resources
  media: atomisp: disable the dynamic and reserved pools
  media: atomisp: turn on camera before setting it
  ...
 2020-06-03 20:59:38 -07:00
Linus Torvalds
ee01c4d72a Merge branch 'akpm' (patches from Andrew) 
Merge more updates from Andrew Morton:
 "More mm/ work, plenty more to come

  Subsystems affected by this patch series: slub, memcg, gup, kasan,
  pagealloc, hugetlb, vmscan, tools, mempolicy, memblock, hugetlbfs,
  thp, mmap, kconfig"

* akpm: (131 commits)
  arm64: mm: use ARCH_HAS_DEBUG_WX instead of arch defined
  x86: mm: use ARCH_HAS_DEBUG_WX instead of arch defined
  riscv: support DEBUG_WX
  mm: add DEBUG_WX support
  drivers/base/memory.c: cache memory blocks in xarray to accelerate lookup
  mm/thp: rename pmd_mknotpresent() as pmd_mkinvalid()
  powerpc/mm: drop platform defined pmd_mknotpresent()
  mm: thp: don't need to drain lru cache when splitting and mlocking THP
  hugetlbfs: get unmapped area below TASK_UNMAPPED_BASE for hugetlbfs
  sparc32: register memory occupied by kernel as memblock.memory
  include/linux/memblock.h: fix minor typo and unclear comment
  mm, mempolicy: fix up gup usage in lookup_node
  tools/vm/page_owner_sort.c: filter out unneeded line
  mm: swap: memcg: fix memcg stats for huge pages
  mm: swap: fix vmstats for huge pages
  mm: vmscan: limit the range of LRU type balancing
  mm: vmscan: reclaim writepage is IO cost
  mm: vmscan: determine anon/file pressure balance at the reclaim root
  mm: balance LRU lists based on relative thrashing
  mm: only count actual rotations as LRU reclaim cost
  ...
 2020-06-03 20:24:15 -07:00
Christoph Hellwig
cddf8a2c4a fs: move fiemap range validation into the file systems instances 
Replace fiemap_check_flags with a fiemap_prep helper that also takes the
inode and mapped range, and performs the sanity check and truncation
previously done in fiemap_check_range.  This way the validation is inside
the file system itself and thus properly works for the stacked overlayfs
case as well.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-7-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
 2020-06-03 23:16:55 -04:00