If multiple redundant fsync calls are triggered, we don't need to write its
node pages with fsync mark continuously.
So, this patch adds FI_NEED_FSYNC to track whether the latest node block is
written with the fsync mark or not.
If the mark was set, a new fsync doesn't need to write a node block.
Otherwise, we should do a new node block with the mark for roll-forward
recovery.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch introduces fi->i_sem to protect fi's info that includes xattr_ver,
pino, i_nlink.
This enables to remove i_mutex during f2fs_sync_file, resulting in performance
improvement when a number of fsync calls are triggered from many concurrent
threads.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
It is more reasonable to determine the reclaiming rate of prefree segments
according to the volume size, which is set to 5% by default.
For example, if the volume is 128GB, the prefree segments are reclaimed
when the number reaches to 6.4GB.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The NM_WOUT_THRESHOLD is now obsolete since f2fs starts to control on a basis
of the memory footprint.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch introduces ram_thresh, a sysfs entry, which controls the memory
footprint used by the free nid list and the nat cache.
Previously, the free nid list was controlled by MAX_FREE_NIDS, while the nat
cache was managed by NM_WOUT_THRESHOLD.
However, this approach cannot be applied dynamically according to the system.
So, this patch adds ram_thresh that users can specify the threshold, which is
in order of 1 / 1024.
For example, if the total ram size is 4GB and the value is set to 10 by default,
f2fs tries to control the number of free nids and nat caches not to consume over
10 * (4GB / 1024) = 10MB.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The try_to_free_nats should not receive the negative nr_shrink.
Otherwise, it can drop all the nat entries by the while loop.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
If a page is on writeback, f2fs can face with deadlock due to under writepages.
This is caused by merging IOs inside f2fs, so if it comes to detect, let's throw
merged IOs, which is implemented by f2fs_wait_on_page_writeback.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch introduces nr_pages_to_write to align page writes to the segment
or other operational unit size, which can be tuned according to the system
environment.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch introduces nr_pages_to_skip(sbi, type) to determine writepages can
be skipped.
The dentry, node, and meta pages can be conrolled by F2FS without breaking the
FS consistency.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously 'background_gc={on***,off***}' is being parsed as correct option,
with this patch we cloud fix the trivial bug in mount process.
Change log from v1:
o need to check length of parameter suggested by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
We should return error number of read_normal_summaries instead of -EINVAL when
read_normal_summaries failed.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch introduces a help function f2fs_has_xattr_block for better
readability.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Upper bound checking of ino should be added to f2fs_nfs_get_inode, so unneeded
process before do_read_inode in f2fs_iget could be avoided when ino is invalid.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch introduces a help function f2fs_has_inline_xattr for better
readability.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously we do not recover inline xattr data of inode after power-cut, so
inline xattr data may be lost.
We should recover the data during the roll-forward process.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously, we ra_sum_pages to pre-read contiguous pages as more
as possible, and if we fail to alloc more pages, an ENOMEM error
will be reported upstream, even though we have alloced some pages
yet. In fact, we can use the available pages to do the job partly,
and continue the rest in the following circle. Only reporting ENOMEM
upstream if we really can not alloc any available page.
And another fix is ignoring dealing with the following pages if an
EIO occurs when reading page from page_list.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: modify the flow for better neat code]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Integrated a couple of minor changes for better readability suggested by
Chao Yu.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch fixes performance regression of dbench reported by
Alex <hbx7d@yandex.com>.
This issue was revealed by Phoronix tests results:
http://www.phoronix.com/scan.php?page=article&item=linux_314_ssdfs&num=2
It turns out that we need to assign WRITE_SYNC to the node writes, if
fsync is triggered.
The performance numbers are like below, which is measured by Alex.
1. 355MB/s ext4
2. 225MB/s f2fs : WRITE for node writes
3. 525MB/s f2fs : WRITE_SYNC for node writes
Reported-And-Tested-by: Alex <hbx7d@yandex.com>.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
We should de-account dirty counters for page when redirty in ->writepage().
Wu Fengguang described in 'commit 971767caf632190f77a40b4011c19948232eed75':
"writeback: fix dirtied pages accounting on redirty
De-account the accumulative dirty counters on page redirty.
Page redirties (very common in ext4) will introduce mismatch between
counters (a) and (b)
a) NR_DIRTIED, BDI_DIRTIED, tsk->nr_dirtied
b) NR_WRITTEN, BDI_WRITTEN
This will introduce systematic errors in balanced_rate and result in
dirty page position errors (ie. the dirty pages are no longer balanced
around the global/bdi setpoints)."
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch use existing macro F2FS_INODE/NEXT_FREE_BLKADDR to clean up some
codes.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
If there are multi segments in one section, we will read those SSA blocks which
have contiguous address one by one in f2fs_gc. It may lost performance, let's
read ahead SSA blocks by merge multi read request.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds an sysfs entry to control dir_level used by the large directory.
The description of this entry is:
dir_level This parameter controls the directory level to
support large directory. If a directory has a
number of files, it can reduce the file lookup
latency by increasing this dir_level value.
Otherwise, it needs to decrease this value to
reduce the space overhead. The default value is 0.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch introduces an i_dir_level field to support large directory.
Previously, f2fs maintains multi-level hash tables to find a dentry quickly
from a bunch of chiild dentries in a directory, and the hash tables consist of
the following tree structure as below.
In Documentation/filesystems/f2fs.txt,
----------------------
A : bucket
B : block
N : MAX_DIR_HASH_DEPTH
----------------------
level #0 | A(2B)
|
level #1 | A(2B) - A(2B)
|
level #2 | A(2B) - A(2B) - A(2B) - A(2B)
. | . . . .
level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B)
. | . . . .
level #N | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B)
But, if we can guess that a directory will handle a number of child files,
we don't need to traverse the tree from level #0 to #N all the time.
Since the lower level tables contain relatively small number of dentries,
the miss ratio of the target dentry is likely to be high.
In order to avoid that, we can configure the hash tables sparsely from level #0
like this.
level #0 | A(2B) - A(2B) - A(2B) - A(2B)
level #1 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B)
. | . . . .
level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B)
. | . . . .
level #N | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B)
With this structure, we can skip the ineffective tree searches in lower level
hash tables.
This patch adds just a facility for this by introducing i_dir_level in
f2fs_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
It turns out that a bit operation like find_next_bit is not always fast enough
for f2fs_find_entry.
Instead, it is pretty much simple and fast to traverse each dentries.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The stat_show is just to show the current status of f2fs.
So, we can remove all the there-in locks.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch introduces a radix tree for the list of free_nids, which enhances
the performance on free nid management.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Introduce help macro on_build_free_nids() which just uses build_lock
to judge whether the building free nid is going, so that we can remove
the on_build_free_nids field from f2fs_sb_info.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
[Jaegeuk Kim: remove an unnecessary white line removal]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The nat cache entry maintains a status whether it is checkpointed or not.
So, if a new cache entry is loaded from the last checkpoint,
nat_entry->checkpointed should be true.
If the cache entry is modified as being dirty, nat_entry->checkpoint should
be false.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
At the end of the recovery procedure, write_checkpoint is called and updates
the cp count which is managed by f2fs stat.
But, previously build_stat() is called after the recovery procedure, which
results in:
BUG: unable to handle kernel NULL pointer dereference at 000000000000012c
IP: [<ffffffffa03b1030>] write_checkpoint+0x720/0xbc0 [f2fs]
Call Trace:
[<ffffffff810a6b44>] ? mark_held_locks+0x74/0x140
[<ffffffff8109a3e0>] ? __init_waitqueue_head+0x60/0x60
[<ffffffffa03bf036>] recover_fsync_data+0x656/0xf20 [f2fs]
[<ffffffff812ee3eb>] ? security_d_instantiate+0x1b/0x30
[<ffffffffa03aeb4d>] f2fs_fill_super+0x94d/0xa00 [f2fs]
[<ffffffff811a9825>] mount_bdev+0x1a5/0x1f0
[<ffffffff8114915e>] ? __get_free_pages+0xe/0x40
[<ffffffffa03ae200>] ? f2fs_remount+0x130/0x130 [f2fs]
[<ffffffffa03aa575>] f2fs_mount+0x15/0x20 [f2fs]
[<ffffffff811aa713>] mount_fs+0x43/0x1b0
[<ffffffff811c7124>] vfs_kern_mount+0x74/0x160
[<ffffffff811c5cb1>] ? __get_fs_type+0x51/0x60
[<ffffffff811c9727>] do_mount+0x237/0xb50
[<ffffffff811c936a>] ? copy_mount_options+0x3a/0x170
So, this patche changes the order of recovery_fsync_data() and
f2fs_build_stats().
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Even if f2fs_write_data_page is called by the page reclaiming path, we should
not write the page to provide enough free segments for the worst case scenario.
Otherwise, f2fs can face with no free segment while gc is conducted, resulting
in:
------------[ cut here ]------------
kernel BUG at /home/zeus/f2fs_test/src/fs/f2fs/segment.c:565!
RIP: 0010:[<ffffffffa02c3b11>] [<ffffffffa02c3b11>] new_curseg+0x331/0x340 [f2fs]
Call Trace:
allocate_segment_by_default+0x204/0x280 [f2fs]
allocate_data_block+0x108/0x210 [f2fs]
write_data_page+0x8a/0xc0 [f2fs]
do_write_data_page+0xe1/0x2a0 [f2fs]
move_data_page+0x8a/0xf0 [f2fs]
f2fs_gc+0x446/0x970 [f2fs]
f2fs_balance_fs+0xb6/0xd0 [f2fs]
f2fs_write_begin+0x50/0x350 [f2fs]
? unlock_page+0x27/0x30
? unlock_page+0x27/0x30
generic_file_buffered_write+0x10a/0x280
? file_update_time+0xa3/0xf0
__generic_file_aio_write+0x1c8/0x3d0
? generic_file_aio_write+0x52/0xb0
? generic_file_aio_write+0x52/0xb0
generic_file_aio_write+0x65/0xb0
do_sync_write+0x5a/0x90
vfs_write+0xc5/0x1f0
SyS_write+0x55/0xa0
system_call_fastpath+0x16/0x1b
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch shows the counts of checkpoint in f2fs' status.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch help us to cleanup the readahead code by merging ra_{sit,nat}_pages
function into ra_meta_pages.
Additionally the new function is used to readahead cp block in
recover_orphan_inodes.
Change log from v1:
o fix a deadloop bug pointed by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously without protection of inode mutex, f2fs_falloc and other data
correlated operations will interfere with each other.
So let's use inode mutex to keep atomicity of f2fs_falloc.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
If f2fs entered errorneous checkpoint status, it should skip writing meta
pages instead of redirtying the pages out.
Otherwise, it cannot unmount the partition even though f2fs is under read-only
status.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
When a new directory is allocated, if an error is occurred, we should truncate
preallocated dentry pages too.
This bug was reported by Andrey Tsyvarev after a while as follows.
mkdir()->
f2fs_add_link()->
init_inode_metadata()->
f2fs_init_acl()->
f2fs_get_acl()->
f2fs_getxattr()->
read_all_xattrs() fails.
Also there was a BUG_ON triggered after the fault in
mkdir()->
f2fs_add_link()->
init_inode_metadata()->
remove_inode_page() ->
f2fs_bug_on(inode->i_blocks != 0 && inode->i_blocks != 1);
But, previous patch wasn't perfect to resolve that bug, so the following bug
report was also submitted.
kernel BUG at fs/f2fs/inode.c:274!
Call Trace:
[<ffffffff811fde03>] evict+0xa3/0x1a0
[<ffffffff811fe615>] iput+0xf5/0x180
[<ffffffffa01c7f63>] f2fs_mkdir+0xf3/0x150 [f2fs]
[<ffffffff811f2a77>] vfs_mkdir+0xb7/0x160
[<ffffffff811f36bf>] SyS_mkdir+0x5f/0xc0
[<ffffffff81680769>] system_call_fastpath+0x16/0x1b
Finally, this patch resolves all the issues like below.
If an error is occurred after make_empty_dir(),
1. truncate_inode_pages()
The make_bad_inode() prior to iput() will change i_mode to S_IFREG, which
means that f2fs will not decrement fi->dirty_dents during f2fs_evict_inode.
But, by calling it here, we can do that.
2. truncate_blocks()
Preallocated dentry pages are trucated here to sync i_blocks.
3. remove_dirty_dir_inode()
Remove this directory inode from the list.
Reported-and-Tested-by: Andrey Tsyvarev <tsyvarev@ispras.ru>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch modifies flow a little bit to avoid the following build warnings.
src/fs/f2fs/recovery.c: In function ‘check_index_in_prev_nodes’:
src/fs/f2fs/recovery.c:288:51: warning: ‘sum.<U5390>.<U52f8>.ofs_in_node’ may
be used uninitialized in this function [-Wmaybe-uninitialized]
src/fs/f2fs/recovery.c:260:23: warning: ‘sum.nid’ may be used uninitialized
in this function [-Wmaybe-uninitialized]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This is the erroneous scenario.
i_size on-disk i_size i_blocks
__f2fs_add_link() 4096 4096 2
get_new_data_page 8192 4096 3
-ENOSPC = init_inode_metadata
checkpoint - 4096 3
POR and reboot
__f2fs_add_link() 4096 4096 3
page = get_new_data_page (page->index = 1 by NEW_ADDR)
add a dentry to the page successfully
f2fs_rmdir()
f2fs_empty_dir() 4096 4096 3
f2fs_unlink() goes, since there is no valid dentry due to i_size = 4096.
But, still there is one dentry in page->index = 1.
So this patch moves the code to write dir->i_size into on-disk i_size in order
to sync dir's i_size, on-disk i_size, and its i_blocks.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch modifies the use of bi_private to remove pointer chasing for sbi.
Previously, we had a bi_private structure, but it needs memory allocation.
So this patch uses bi_private by the sbi pointer and adds a completion pointer
into the sbi.
This can achieve no memory allocation and nice use of the bi_private.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
If a new xattr node page was allocated and its inode is fsynced, we should
recover the xattr node page during the roll-forward process after power-cut.
But, previously, f2fs didn't handle that case, resulting in kernel panic as
follows reported by Tom Li.
BUG: unable to handle kernel paging request at ffffc9001c861a98
IP: [<ffffffffa0295236>] check_index_in_prev_nodes+0x86/0x2d0 [f2fs]
Call Trace:
[<ffffffff815ece9b>] ? printk+0x48/0x4a
[<ffffffffa029626a>] recover_fsync_data+0xdca/0xf50 [f2fs]
[<ffffffffa02873ae>] f2fs_fill_super+0x92e/0x970 [f2fs]
[<ffffffff8112c9f8>] mount_bdev+0x1b8/0x200
[<ffffffffa0286a80>] ? f2fs_remount+0x130/0x130 [f2fs]
[<ffffffffa0285e40>] f2fs_mount+0x10/0x20 [f2fs]
[<ffffffff8112d4de>] mount_fs+0x3e/0x1b0
[<ffffffff810ef4eb>] ? __alloc_percpu+0xb/0x10
[<ffffffff8114761f>] vfs_kern_mount+0x6f/0x120
[<ffffffff811497b9>] do_mount+0x259/0xa90
[<ffffffff810ead1d>] ? memdup_user+0x3d/0x80
[<ffffffff810eadb3>] ? strndup_user+0x53/0x70
[<ffffffff8114a2c9>] SyS_mount+0x89/0xd0
[<ffffffff815feae2>] system_call_fastpath+0x16/0x1b
This patch adds a recovery function of xattr node pages.
Reported-by: Tom Li <biergaizi@members.fsf.org>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
