This patch fixes the checkpatch.pl warnings:
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
Signed-off-by: Amarjargal Gundjalam <amarjargal.gundjalam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checkpatch.pl check:
CHECK: spaces preferred around that ‘’
Signed-off-by: Amarjargal Gundjalam <amarjargal.gundjalam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checkpatch.pl check:
CHECK: No space is necessary after a cast
Signed-off-by: Amarjargal Gundjalam <amarjargal.gundjalam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
void pointers do not need to be cast to other pointer types.
The semantic patch used to find this:
@r@
expression x;
void* e;
type T;
identifier f;
@@
(
*((T *)e)
|
((T *)x)[...]
|
((T *)x)->f
|
- (T *)
e
)
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we are not able to setup the LINK UP command then don't increment the
interrupt count.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the ioctl function if we are not able to UP the link after setting
the new parameters then return an error code to the userspace.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While initializing the interface if we are not able to setup the command
to UP the link then we release everything and return the error code.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
slic_link_event_handler() issues command READ_LINK_STATUS to be executed
asynchronously, which is followed by UP configuration write command. But
it can fail while setting up the command and in that case the link will
not be up. Lets check the status and return it.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes a couple of ununsed MACRO's in this header file
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We can't save two different values in "flags" so it means that IRQs are
not enabled properly at the end of this function. This isn't a problem
in the current code because it's always called with IRQs disabled so we
don't want to enable them at the end.
This bug is old but it's thanks to David Matlack's recent cleanups that
Smatch can detect it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
curaddrupper caches the last written upper 32-bits of a dma address
(the device has one register for the upper 32-bits of all dma
address registers). The problem is, not every dma address write
checks and sets curaddrupper. This causes the driver to occasionally
not write the upper 32-bits of a dma address to the device when it
really should.
I've seen this manifest particularly when the driver is trying to
read config data from the device (RCONFIG) in order to checksum the
device's eeprom. Since the device writes its config data to the
wrong DMA address the driver reads 0 as the eeprom size and the
eeprom checksum fails.
This patch fixes the issue by removing curaddrupper and always
writing the upper 32-bits of dma addresses.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As per TODO. This commit introduces no functional changes.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes __func__ from dev_err. dev_err includes information about:
(devcice, driver, specific instance of device, etc) in the log printout.
This was done using Coccinelle, with the following semantic patch:
@a@
expression E, R;
expression msg;
@@
dev_err(E, msg, __func__, R);
@script:python b@
e << a.msg;
y;
@@
if(e.find("%s: ") == True):
m = e.replace("%s: ", "", 1);
coccinelle.y = m;
elif(e.find("%s ") == True):
m = e.replace("%s ", "", 1);
coccinelle.y = m;
elif(e.find("%s:") == True):
m = e.replace("%s:", "", 1);
coccinelle.y = m;
else:
m = e.replace("%s", "",1);
coccinelle.y = m;
@c@
expression a.E, a.msg, a.R;
identifier b.y;
@@
- dev_err(E, msg, __func__, R);
+ dev_err(E, y, R);
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removes extra parentheses around bitwise left shift operations.
The case handled is when resultant value is assigned to a variable.
The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
<<
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
<<
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
<<
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removes extra parentheses around bitwise right shift operations.
The cases handled here are when resultant values are assigned to
variables. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Some coding style issues were handled manually to avoid
checkpatch warnings and errors.
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch drops #include <linux/moduleparam.h> in all the staging
driver files that also include #include <linux/module.h> as
module.h includes moduleparam.h already.
The following semantic patch is used to make these changes:
@ includesmodule @
@@
@ depends on includesmodule @
@@
- #include <linux/moduleparam.h>
Signed-off-by: Navya Sri Nizamkari <navyasri.tech@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes warning issue by checkpatch.pl by joining the split string.
And also creates new warning that line exceeds 80 characters. In this case
this is more beneficial because of possibility to grep the string.
Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch replaces init_timer and the 2 step initialization of function
and data by setup_timer to make the code more concise.
The issue was discovered using the following coccinelle script:
@@
expression ds, e1, e2;
@@
-init_timer (&ds);
+setup_timer (&ds, e1, e2);
...
(
-ds.function = e1;
...
-ds.data = e2;
|
-ds.data = e2;
...
-ds.function = e1;
)
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A patch to the slicoss.c file to fix some of the long line issues found by the
checkpath.pl tool
Signed-off-by: Sean Cleator <seancleator@hotmail.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unnecessary parentheses around the right hand side of an assignment
is removed using the following semantic patch:
@@
identifier x,f;
constant C;
@@
(
-x = (f / C );
+x = f / C ;
|
-x = (f % C );
+x = f % C ;
)
Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes "cast to restricted __be32"
sparse warning.
remove temporary value assignment and use inplace
__be32 conversion for ntohl function which is can
get big endian format
Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch.pl warnings:
WARNING: "Prefer ether_addr_copy() over memcpy() if the Ethernet
addresses are __aligned(2)" in file slicoss.c
Pahole shows that the addresses are aligned.
Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes "void function return statements are not generally useful"
checkpatch.pl warning slicoss.c
Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a patch for the slicoss.c file that fixes four instances
of the following warning:
WARNING: else is not generally useful after a break or return
Signed-off-by: Vincent Heuken <me@vincentheuken.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
First, don't print pci device information or driver prefixes, this
is already printed by dev_err. Next, don't report error messages
via dev_err when the failing function already reports all errors
via dev_err.
Signed-off-by: David Matlack <matlackdavid@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the private linked list of netdev structs. This list isn't
being used anyway.
This patch has no noticable effect.
Signed-off-by: David Matlack <matlackdavid@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
slic_config_get() can fail. Change the return type from void to
int and handle the error in slic_card_init(). So now, instead of
silently failing (and then timing out waiting for the config data),
the driver will fail loudly at request time.
Signed-off-by: David Matlack <matlackdavid@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove fail_on_bad_eeprom, which was always 0 and thus being used
to ignore incorrect checksumming. This means devices with corrupt
eeprom will now cause the driver to fail.
Since fail_on_bad_eeprom was the last member in use of struct
slic_reg_params, remove that struct altogether.
Signed-off-by: David Matlack <matlackdavid@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rewrite slic_eeprom_cksum() to fix bugs and make readable. This patch
technically has no effect on the user as failed eeprom checksums are
ignored anyway.
The original implementation had the following issues:
1. 2 of the 3 unrolled loops had the following bug:
while ((len -= 32) >= 0) {
[...]
sum += w[15];
w = (u16 *)((ulong) w + 16); /* verify */
}
This processes 32-bytes of data but only increments the word
pointer by 16 bytes. Fixing both of these bugs seems to fix
slic_eeprom_cksum().
2. Non-descriptive variable names, use of unions, and macros that
change local state make the code difficult to read.
3. The checksum loop is unrolled which makes the code harder to
reason about while providing small performance improvement:
- max eeprom length is 0x80 bytes (MAX_EECODE_SIZE), that's
only 0x40 iterations
- checksum is only computed during pci probe(), so not very
often
Tested on Mojave card
Signed-off-by: David Matlack <matlackdavid@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a use-after-free bug that causes a null pointer
dereference in slic_entry_halt.
Since unregister_netdev() will ultimately call slic_entry_halt (the
net_device ndo_stop() virtual function for this device), we should
call it before freeing the memory used by slic_entry_halt.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a bug that only manifests when the physical address of
the interrupt status register is >4GB. Specifically, the driver was only
telling the device about the lower 32 bits of the ISR. This patch adds
the upper 32 bits.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a memory leak in slic_card_init. If the driver fails
to poll for an interrupt after requesting config data from the device
the dma memory is never freed.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As per the TODO file, this patch removes the gratuitous debug
infrastructure. As an extra incentive for removing this code,
the debugfs files are not cleaned up properly. For example, if
register_netdev() fails in slic_entry_probe() then all debugfs
files get left behind, even after the driver module is unloaded.
Touching these files quickly leads to an oops.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes two fields from the private "struct adapter".
Specifically,
memorybase duplicate of slic_regs
memorylength written once and never read. This field is trivially
computed with pci_resource_len if it's ever needed in
the future.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes two free-after-free bugs in slic_entry_remove.
Specifically, slic_unmap_mmio_space() iounmaps adapter->slic_regs,
which is the same region of memory as dev->base_addr (iounmap-ed
a few lines later).
Next, both release_mem_region() and pci_release_regions() are called
on the same pci_dev struct.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a use-after-free bug that can cause a kernel
oops. If slic_card_init fails then slic_entry_probe (the pci
probe() function for this device) will return error without
cleaning up memory.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes following smatch warning:
slicoss/slicoss.c:1429 slic_cmdq_addcmdpage() error: we previously assumed 'pslic_handle' could be null
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure iounmap is always called after ioremap when module loading
fails. Also remove a call to release_mem_region because that region is
never reserved in the first place.
Fixes the following issue reported by Coccinelle:
drivers/staging/slicoss/slicoss.c:3727:1-7: ERROR: missing iounmap; ioremap on line 3661 and execution via conditional on line 3677
Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch moves the macro "SLIC_GET_SLIC_HANDLE(_adapter, _pslic_handle)" to inline
in slicoss.c since it has been used only once.
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed unnecessary line continuations in slicoss.c
Signed-off-by: Gulsah Kose <gulsah.1004@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
This patch removes unused macro in slicoss.c as mentioned in TODO tasks.
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
This patch fixes the following checkpatch.pl issues in slicoss.c
WARNING: unnecessary whitespace before a quoted newline in slicoss.c
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch.pl issues in slicoss.c
WARNING: quoted string split across lines
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch.pl issues in slic.h:
WARNING: line over 80 characters
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding a MAINTAINERS entry with content from the README.
Move the TODO items from the README to a separate TODO file.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
