mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-16 01:04:08 +08:00
43df5242af
1705 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
David Hildenbrand
|
3c381db1fa |
mm/page_alloc: count CMA pages per zone and print them in /proc/zoneinfo
Let's count the number of CMA pages per zone and print them in
/proc/zoneinfo.
Having access to the total number of CMA pages per zone is helpful for
debugging purposes to know where exactly the CMA pages ended up, and to
figure out how many pages of a zone might behave differently, even after
some of these pages might already have been allocated.
As one example, CMA pages part of a kernel zone cannot be used for
ordinary kernel allocations but instead behave more like ZONE_MOVABLE.
For now, we are only able to get the global nr+free cma pages from
/proc/meminfo and the free cma pages per zone from /proc/zoneinfo.
Example after this patch when booting a 6 GiB QEMU VM with
"hugetlb_cma=2G":
# cat /proc/zoneinfo | grep cma
cma 0
nr_free_cma 0
cma 0
nr_free_cma 0
cma 524288
nr_free_cma 493016
cma 0
cma 0
# cat /proc/meminfo | grep Cma
CmaTotal: 2097152 kB
CmaFree: 1972064 kB
Note: We print even without CONFIG_CMA, just like "nr_free_cma"; this way,
one can be sure when spotting "cma 0", that there are definetly no
CMA pages located in a zone.
[david@redhat.com: v2]
Link: https://lkml.kernel.org/r/20210128164533.18566-1-david@redhat.com
[david@redhat.com: v3]
Link: https://lkml.kernel.org/r/20210129113451.22085-1-david@redhat.com
Link: https://lkml.kernel.org/r/20210127101813.6370-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
David Hildenbrand
|
a0cd7a7c4b |
mm: simplify free_highmem_page() and free_reserved_page()
adjust_managed_page_count() as called by free_reserved_page() properly handles pages in a highmem zone, so we can reuse it for free_highmem_page(). We can now get rid of totalhigh_pages_inc() and simplify free_reserved_page(). Link: https://lkml.kernel.org/r/20210126182113.19892-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Baoquan He
|
9699ee7b29 |
mm: remove unneeded local variable in free_area_init_core
Local variable 'zone_start_pfn' is not needed since there's only one call site in free_area_init_core(). Let's remove it and pass zone->zone_start_pfn directly to init_currently_empty_zone(). Link: https://lkml.kernel.org/r/20210122135956.5946-6-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Baoquan He
|
7010a6eca4 |
mm: simplify parameter of setup_usemap()
Parameter 'zone' has got needed information, let's remove other unnecessary parameters. Link: https://lkml.kernel.org/r/20210122135956.5946-5-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Baoquan He
|
3256ff83c5 |
mm: simplify parater of function memmap_init_zone()
As David suggested, simply passing 'struct zone *zone' is enough. We can get all needed information from 'struct zone*' easily. Link: https://lkml.kernel.org/r/20210122135956.5946-4-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Suggested-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Baoquan He
|
ab28cb6e1e |
mm: rename memmap_init() and memmap_init_zone()
The current memmap_init_zone() only handles memory region inside one zone, actually memmap_init() does the memmap init of one zone. So rename both of them accordingly. Link: https://lkml.kernel.org/r/20210122135956.5946-3-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Muchun Song
|
a1528e21f8 |
mm: memcontrol: convert NR_SHMEM_PMDMAPPED account to pages
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters. In
the systems with hundreds of processors it can be GBs of memory. For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates. But it can make the statistics more accuracy
for the THP vmstat counters.
So we convert the NR_SHMEM_PMDMAPPED account to pages. This patch is
consistent with
|
||
|
Muchun Song
|
57b2847d3c |
mm: memcontrol: convert NR_SHMEM_THPS account to pages
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters. In
the systems with hundreds of processors it can be GBs of memory. For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates. But it can make the statistics more accuracy
for the THP vmstat counters.
So we convert the NR_SHMEM_THPS account to pages. This patch is
consistent with
|
||
|
Muchun Song
|
69473e5de8 |
mm: memcontrol: convert NR_ANON_THPS account to pages
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters. In
the systems with hundreds of processors it can be GBs of memory. For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates. But it can make the statistics more accuracy
for the THP vmstat counters.
So we convert the NR_ANON_THPS account to pages. This patch is consistent
with
|
||
Kevin Hao
|
b358e2122b |
mm: page_frag: Introduce page_frag_alloc_align()
In the current implementation of page_frag_alloc(), it doesn't have
any align guarantee for the returned buffer address. But for some
hardwares they do require the DMA buffer to be aligned correctly,
so we would have to use some workarounds like below if the buffers
allocated by the page_frag_alloc() are used by these hardwares for
DMA.
buf = page_frag_alloc(really_needed_size + align);
buf = PTR_ALIGN(buf, align);
These codes seems ugly and would waste a lot of memories if the buffers
are used in a network driver for the TX/RX. So introduce
page_frag_alloc_align() to make sure that an aligned buffer address is
returned.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
Linus Torvalds
|
377bf660d0 |
Revert "mm: fix initialization of struct page for holes in memory layout"
This reverts commit
|
||
Andrey Konovalov
|
acb35b177c |
kasan, mm: fix resetting page_alloc tags for HW_TAGS
A previous commit added resetting KASAN page tags to
kernel_init_free_pages() to avoid false-positives due to accesses to
metadata with the hardware tag-based mode.
That commit did reset page tags before the metadata access, but didn't
restore them after. As the result, KASAN fails to detect bad accesses
to page_alloc allocations on some configurations.
Fix this by recovering the tag after the metadata access.
Link: https://lkml.kernel.org/r/02b5bcd692e912c27d484030f666b350ad7e4ae4.1611074450.git.andreyknvl@google.com
Fixes:
|
||
Mike Rapoport
|
d3921cb8be |
mm: fix initialization of struct page for holes in memory layout
There could be struct pages that are not backed by actual physical
memory. This can happen when the actual memory bank is not a multiple
of SECTION_SIZE or when an architecture does not register memory holes
reserved by the firmware as memblock.memory.
Such pages are currently initialized using init_unavailable_mem()
function that iterates through PFNs in holes in memblock.memory and if
there is a struct page corresponding to a PFN, the fields if this page
are set to default values and the page is marked as Reserved.
init_unavailable_mem() does not take into account zone and node the page
belongs to and sets both zone and node links in struct page to zero.
On a system that has firmware reserved holes in a zone above ZONE_DMA,
for instance in a configuration below:
# grep -A1 E820 /proc/iomem
7a17b000-7a216fff : Unknown E820 type
7a217000-7bffffff : System RAM
unset zone link in struct page will trigger
VM_BUG_ON_PAGE(!zone_spans_pfn(page_zone(page), pfn), page);
because there are pages in both ZONE_DMA32 and ZONE_DMA (unset zone link
in struct page) in the same pageblock.
Update init_unavailable_mem() to use zone constraints defined by an
architecture to properly setup the zone link and use node ID of the
adjacent range in memblock.memory to set the node link.
Link: https://lkml.kernel.org/r/20210111194017.22696-3-rppt@kernel.org
Fixes:
|
||
Hailong liu
|
ce8f86ee94 |
mm/page_alloc: add a missing mm_page_alloc_zone_locked() tracepoint
The trace point *trace_mm_page_alloc_zone_locked()* in __rmqueue() does not currently cover all branches. Add the missing tracepoint and check the page before do that. [akpm@linux-foundation.org: use IS_ENABLED() to suppress warning] Link: https://lkml.kernel.org/r/20201228132901.41523-1-carver4lio@163.com Signed-off-by: Hailong liu <liu.hailong6@zte.com.cn> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Baoquan He
|
dc2da7b45f |
mm: memmap defer init doesn't work as expected
VMware observed a performance regression during memmap init on their platform, and bisected to commit |
||
|
Andrey Konovalov
|
aa1ef4d7b3 |
kasan, mm: reset tags when accessing metadata
Kernel allocator code accesses metadata for slab objects, that may lie out-of-bounds of the object itself, or be accessed when an object is freed. Such accesses trigger tag faults and lead to false-positive reports with hardware tag-based KASAN. Software KASAN modes disable instrumentation for allocator code via KASAN_SANITIZE Makefile macro, and rely on kasan_enable/disable_current() annotations which are used to ignore KASAN reports. With hardware tag-based KASAN neither of those options are available, as it doesn't use compiler instrumetation, no tag faults are ignored, and MTE is disabled after the first one. Instead, reset tags when accessing metadata (currently only for SLUB). Link: https://lkml.kernel.org/r/a0f3cefbc49f34c843b664110842de4db28179d0.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Acked-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vincenzo Frascino
|
c746170d6a |
kasan, mm: untag page address in free_reserved_area
free_reserved_area() memsets the pages belonging to a given memory area. As that memory hasn't been allocated via page_alloc, the KASAN tags that those pages have are 0x00. As the result the memset might result in a tag mismatch. Untag the address to avoid spurious faults. Link: https://lkml.kernel.org/r/ebef6425f4468d063e2f09c1b62ccbb2236b71d3.1606161801.git.andreyknvl@google.com Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
5b200f5789 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "More MM work: a memcg scalability improvememt" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/lru: revise the comments of lru_lock mm/lru: introduce relock_page_lruvec() mm/lru: replace pgdat lru_lock with lruvec lock mm/swap.c: serialize memcg changes in pagevec_lru_move_fn mm/compaction: do page isolation first in compaction mm/lru: introduce TestClearPageLRU() mm/mlock: remove __munlock_isolate_lru_page() mm/mlock: remove lru_lock on TestClearPageMlocked mm/vmscan: remove lruvec reget in move_pages_to_lru mm/lru: move lock into lru_note_cost mm/swap.c: fold vm event PGROTATED into pagevec_move_tail_fn mm/memcg: add debug checking in lock_page_memcg mm: page_idle_get_page() does not need lru_lock mm/rmap: stop store reordering issue on page->mapping mm/vmscan: remove unnecessary lruvec adding mm/thp: narrow lru locking mm/thp: simplify lru_add_page_tail() mm/thp: use head for head page in lru_add_page_tail() mm/thp: move lru_add_page_tail() to huge_memory.c |
||
Alex Shi
|
6168d0da2b |
mm/lru: replace pgdat lru_lock with lruvec lock
This patch moves per node lru_lock into lruvec, thus bring a lru_lock for each of memcg per node. So on a large machine, each of memcg don't have to suffer from per node pgdat->lru_lock competition. They could go fast with their self lru_lock. After move memcg charge before lru inserting, page isolation could serialize page's memcg, then per memcg lruvec lock is stable and could replace per node lru lock. In isolate_migratepages_block(), compact_unlock_should_abort and lock_page_lruvec_irqsave are open coded to work with compact_control. Also add a debug func in locking which may give some clues if there are sth out of hands. Daniel Jordan's testing show 62% improvement on modified readtwice case on his 2P * 10 core * 2 HT broadwell box. https://lore.kernel.org/lkml/20200915165807.kpp7uhiw7l3loofu@ca-dmjordan1.us.oracle.com/ Hugh Dickins helped on the patch polish, thanks! [alex.shi@linux.alibaba.com: fix comment typo] Link: https://lkml.kernel.org/r/5b085715-292a-4b43-50b3-d73dc90d1de5@linux.alibaba.com [alex.shi@linux.alibaba.com: use page_memcg()] Link: https://lkml.kernel.org/r/5a4c2b72-7ee8-2478-fc0e-85eb83aafec4@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-18-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rong Chen <rong.a.chen@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
d635a69dd4 |
Networking updates for 5.11
Core:
- support "prefer busy polling" NAPI operation mode, where we defer softirq
for some time expecting applications to periodically busy poll
- AF_XDP: improve efficiency by more batching and hindering
the adjacency cache prefetcher
- af_packet: make packet_fanout.arr size configurable up to 64K
- tcp: optimize TCP zero copy receive in presence of partial or unaligned
reads making zero copy a performance win for much smaller messages
- XDP: add bulk APIs for returning / freeing frames
- sched: support fragmenting IP packets as they come out of conntrack
- net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs
BPF:
- BPF switch from crude rlimit-based to memcg-based memory accounting
- BPF type format information for kernel modules and related tracing
enhancements
- BPF implement task local storage for BPF LSM
- allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage
Protocols:
- mptcp: improve multiple xmit streams support, memory accounting and
many smaller improvements
- TLS: support CHACHA20-POLY1305 cipher
- seg6: add support for SRv6 End.DT4/DT6 behavior
- sctp: Implement RFC 6951: UDP Encapsulation of SCTP
- ppp_generic: add ability to bridge channels directly
- bridge: Connectivity Fault Management (CFM) support as is defined in
IEEE 802.1Q section 12.14.
Drivers:
- mlx5: make use of the new auxiliary bus to organize the driver internals
- mlx5: more accurate port TX timestamping support
- mlxsw:
- improve the efficiency of offloaded next hop updates by using
the new nexthop object API
- support blackhole nexthops
- support IEEE 802.1ad (Q-in-Q) bridging
- rtw88: major bluetooth co-existance improvements
- iwlwifi: support new 6 GHz frequency band
- ath11k: Fast Initial Link Setup (FILS)
- mt7915: dual band concurrent (DBDC) support
- net: ipa: add basic support for IPA v4.5
Refactor:
- a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior
- phy: add support for shared interrupts; get rid of multiple driver
APIs and have the drivers write a full IRQ handler, slight growth
of driver code should be compensated by the simpler API which
also allows shared IRQs
- add common code for handling netdev per-cpu counters
- move TX packet re-allocation from Ethernet switch tag drivers to
a central place
- improve efficiency and rename nla_strlcpy
- number of W=1 warning cleanups as we now catch those in a patchwork
build bot
Old code removal:
- wan: delete the DLCI / SDLA drivers
- wimax: move to staging
- wifi: remove old WDS wifi bridging support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=GXs1
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- support "prefer busy polling" NAPI operation mode, where we defer
softirq for some time expecting applications to periodically busy
poll
- AF_XDP: improve efficiency by more batching and hindering the
adjacency cache prefetcher
- af_packet: make packet_fanout.arr size configurable up to 64K
- tcp: optimize TCP zero copy receive in presence of partial or
unaligned reads making zero copy a performance win for much smaller
messages
- XDP: add bulk APIs for returning / freeing frames
- sched: support fragmenting IP packets as they come out of conntrack
- net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs
BPF:
- BPF switch from crude rlimit-based to memcg-based memory accounting
- BPF type format information for kernel modules and related tracing
enhancements
- BPF implement task local storage for BPF LSM
- allow the FENTRY/FEXIT/RAW_TP tracing programs to use
bpf_sk_storage
Protocols:
- mptcp: improve multiple xmit streams support, memory accounting and
many smaller improvements
- TLS: support CHACHA20-POLY1305 cipher
- seg6: add support for SRv6 End.DT4/DT6 behavior
- sctp: Implement RFC 6951: UDP Encapsulation of SCTP
- ppp_generic: add ability to bridge channels directly
- bridge: Connectivity Fault Management (CFM) support as is defined
in IEEE 802.1Q section 12.14.
Drivers:
- mlx5: make use of the new auxiliary bus to organize the driver
internals
- mlx5: more accurate port TX timestamping support
- mlxsw:
- improve the efficiency of offloaded next hop updates by using
the new nexthop object API
- support blackhole nexthops
- support IEEE 802.1ad (Q-in-Q) bridging
- rtw88: major bluetooth co-existance improvements
- iwlwifi: support new 6 GHz frequency band
- ath11k: Fast Initial Link Setup (FILS)
- mt7915: dual band concurrent (DBDC) support
- net: ipa: add basic support for IPA v4.5
Refactor:
- a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
Siewior
- phy: add support for shared interrupts; get rid of multiple driver
APIs and have the drivers write a full IRQ handler, slight growth
of driver code should be compensated by the simpler API which also
allows shared IRQs
- add common code for handling netdev per-cpu counters
- move TX packet re-allocation from Ethernet switch tag drivers to a
central place
- improve efficiency and rename nla_strlcpy
- number of W=1 warning cleanups as we now catch those in a patchwork
build bot
Old code removal:
- wan: delete the DLCI / SDLA drivers
- wimax: move to staging
- wifi: remove old WDS wifi bridging support"
* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
net: hns3: fix expression that is currently always true
net: fix proc_fs init handling in af_packet and tls
nfc: pn533: convert comma to semicolon
af_vsock: Assign the vsock transport considering the vsock address flags
af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
vsock_addr: Check for supported flag values
vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
vm_sockets: Add flags field in the vsock address data structure
net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
nfc: s3fwrn5: Release the nfc firmware
net: vxget: clean up sparse warnings
mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
mlxsw: reg: Add Router LPM Cache Enable Register
mlxsw: reg: Add Router LPM Cache ML Delete Register
mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
mlxsw: reg: Add XM Router M Table Register
...
|
||
Mauro Carvalho Chehab
|
a00cda3f0a |
mm: fix kernel-doc markups
Kernel-doc markups should use this format:
identifier - description
Fix some issues on mm files:
1) The definition for get_user_pages_locked() doesn't follow it. Also,
it expects a short descrpition at the header, followed by a long one,
after the parameters. Fix it.
2) Kernel-doc requires that a kernel-doc markup to be immediately below
the function prototype, as otherwise it will rename it. So, move
get_pfnblock_flags_mask() description to the right place.
3) Make invalidate_mapping_pagevec() to also follow the expected
kernel-doc format.
While here, fix a few minor English syntax issues, as suggested
by Matthew:
will used -> will be used
similar with -> similar to
Link: https://lkml.kernel.org/r/80e85dddc92d333bc2159ee8a2294921612e8745.1605521731.git.mchehab+huawei@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Suggested-by: Mattew Wilcox <willy@infradead.org> [English fixes]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Vlastimil Babka
|
f289041ed4 |
mm, page_poison: remove CONFIG_PAGE_POISONING_ZERO
CONFIG_PAGE_POISONING_ZERO uses the zero pattern instead of 0xAA. It was
introduced by commit
|
||
|
Vlastimil Babka
|
8db26a3d47 |
mm, page_poison: use static key more efficiently
Commit
|
||
|
Vlastimil Babka
|
04013513cc |
mm, page_alloc: do not rely on the order of page_poison and init_on_alloc/free parameters
Patch series "cleanup page poisoning", v3. I have identified a number of issues and opportunities for cleanup with CONFIG_PAGE_POISON and friends: - interaction with init_on_alloc and init_on_free parameters depends on the order of parameters (Patch 1) - the boot time enabling uses static key, but inefficienty (Patch 2) - sanity checking is incompatible with hibernation (Patch 3) - CONFIG_PAGE_POISONING_NO_SANITY can be removed now that we have init_on_free (Patch 4) - CONFIG_PAGE_POISONING_ZERO can be most likely removed now that we have init_on_free (Patch 5) This patch (of 5): Enabling page_poison=1 together with init_on_alloc=1 or init_on_free=1 produces a warning in dmesg that page_poison takes precedence. However, as these warnings are printed in early_param handlers for init_on_alloc/free, they are not printed if page_poison is enabled later on the command line (handlers are called in the order of their parameters), or when init_on_alloc/free is always enabled by the respective config option - before the page_poison early param handler is called, it is not considered to be enabled. This is inconsistent. We can remove the dependency on order by making the init_on_* parameters only set a boolean variable, and postponing the evaluation after all early params have been processed. Introduce a new init_mem_debugging_and_hardening() function for that, and move the related debug_pagealloc processing there as well. As a result init_mem_debugging_and_hardening() knows always accurately if init_on_* and/or page_poison options were enabled. Thus we can also optimize want_init_on_alloc() and want_init_on_free(). We don't need to check page_poisoning_enabled() there, we can instead not enable the init_on_* static keys at all, if page poisoning is enabled. This results in a simpler and more effective code. Link: https://lkml.kernel.org/r/20201113104033.22907-1-vbabka@suse.cz Link: https://lkml.kernel.org/r/20201113104033.22907-2-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mateusz Nosek <mateusznosek0@gmail.com> Cc: Laura Abbott <labbott@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Johannes Weiner
|
597c892038 |
mm: don't wake kswapd prematurely when watermark boosting is disabled
On 2-node NUMA hosts we see bursts of kswapd reclaim and subsequent
pressure spikes and stalls from cache refaults while there is plenty of
free memory in the system.
Usually, kswapd is woken up when all eligible nodes in an allocation are
full. But the code related to watermark boosting can wake kswapd on one
full node while the other one is mostly empty. This may be justified to
fight fragmentation, but is currently unconditionally done whether
watermark boosting is occurring or not.
In our case, many of our workloads' throughput scales with available
memory, and pure utilization is a more tangible concern than trends
around longer-term fragmentation. As a result we generally disable
watermark boosting.
Wake kswapd only woken when watermark boosting is requested.
Link: https://lkml.kernel.org/r/20201020175833.397286-1-hannes@cmpxchg.org
Fixes:
|
||
|
Muchun Song
|
7ad69832f3 |
mm/page_alloc: speed up the iteration of max_order
When we free a page whose order is very close to MAX_ORDER and greater
than pageblock_order, it wastes some CPU cycles to increase max_order to
MAX_ORDER one by one and check the pageblock migratetype of that page
repeatedly especially when MAX_ORDER is much larger than pageblock_order.
We also should not be checking migratetype of buddy when "order ==
MAX_ORDER - 1" as the buddy pfn may be invalid, so adjust the condition.
With the new check, we don't need the max_order check anymore, so we
replace it.
Also adjust max_order initialization so that it's lower by one than
previously, which makes the code hopefully more clear.
Link: https://lkml.kernel.org/r/20201204155109.55451-1-songmuchun@bytedance.com
Fixes:
|
||
Lorenzo Stoakes
|
470c61d702 |
mm: page_alloc: refactor setup_per_zone_lowmem_reserve()
setup_per_zone_lowmem_reserve() iterates through each zone setting zone->lowmem_reserve[j] = 0 (where j is the zone's index) then iterates backwards through all preceding zones, setting lower_zone->lowmem_reserve[j] = sum(managed pages of higher zones) / lowmem_reserve_ratio[idx] for each (where idx is the lower zone's index). If the lower zone has no managed pages or its ratio is 0 then all of its lowmem_reserve[] entries are effectively zeroed. As these arrays are only assigned here and all lowmem_reserve[] entries for index < this zone's index are implicitly assumed to be 0 (as these are specifically output in show_free_areas() and zoneinfo_show_print() for example) there is no need to additionally zero index == this zone's index too. This patch avoids zeroing unnecessarily. Rather than iterating through zones and setting lowmem_reserve[j] for each lower zone this patch reverse the process and populates each zone's lowmem_reserve[] values in ascending order. This clarifies what is going on especially in the case of zero managed pages or ratio which is now explicitly shown to clear these values. Link: https://lkml.kernel.org/r/20201129162758.115907-1-lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Lin Feng
|
ba8f3587f5 |
init/main: fix broken buffer_init when DEFERRED_STRUCT_PAGE_INIT set
In the booting phase if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set,
we have following callchain:
start_kernel
...
mm_init
mem_init
memblock_free_all
reset_all_zones_managed_pages
free_low_memory_core_early
...
buffer_init
nr_free_buffer_pages
zone->managed_pages
...
rest_init
kernel_init
kernel_init_freeable
page_alloc_init_late
kthread_run(deferred_init_memmap, NODE_DATA(nid), "pgdatinit%d", nid);
wait_for_completion(&pgdat_init_all_done_comp);
...
files_maxfiles_init
It's clear that buffer_init depends on zone->managed_pages, but it's reset
in reset_all_zones_managed_pages after that pages are readded into
zone->managed_pages, but when buffer_init runs this process is half done
and most of them will finally be added till deferred_init_memmap done. In
large memory couting of nr_free_buffer_pages drifts too much, also
drifting from kernels to kernels on same hardware.
Fix is simple, it delays buffer_init run till deferred_init_memmap all
done.
But as corrected by this patch, max_buffer_heads becomes very large, the
value is roughly as many as 4 times of totalram_pages, formula:
max_buffer_heads = nrpages * (10%) * (PAGE_SIZE / sizeof(struct
buffer_head));
Say in a 64GB memory box we have 16777216 pages, then max_buffer_heads
turns out to be roughly 67,108,864. In common cases, should a buffer_head
be mapped to one page/block(4KB)? So max_buffer_heads never exceeds
totalram_pages. IMO it's likely to make buffer_heads_over_limit bool
value alwasy false, then make codes 'if (buffer_heads_over_limit)' test in
vmscan unnecessary.
So this patch will change the original behavior related to
buffer_heads_over_limit in vmscan since we used a half done value of
zone->managed_pages before, or should we use a smaller factor(<10%) in
previous formula.
akpm: I think this is OK - the max_buffer_heads code is only needed on
highmem machines, to prevent ZONE_NORMAL from being consumed by large
amounts of buffer_heads attached to highmem pagecache. This problem will
not occur on 64-bit machines, so this feature's non-functionality on such
machines is a feature, not a bug.
Link: https://lkml.kernel.org/r/20201123110500.103523-1-linf@wangsu.com
Signed-off-by: Lin Feng <linf@wangsu.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
David Hildenbrand
|
862b6dee20 |
mm/page_alloc: clear all pages in post_alloc_hook() with init_on_alloc=1
commit
|
||
Zou Wei
|
3b1f3658c7 |
mm/page_alloc: mark some symbols with static keyword
Fix the following sparse warnings: mm/page_alloc.c:3040:6: warning: symbol '__drain_all_pages' was not declared. Should it be static? mm/page_alloc.c:6349:6: warning: symbol '__zone_set_pageset_high_and_batch' was not declared. Should it be static? Link: https://lkml.kernel.org/r/1605517365-65858-1-git-send-email-zou_wei@huawei.com Signed-off-by: Zou Wei <zou_wei@huawei.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Matthew Wilcox (Oracle)
|
7f194fbb2d |
mm/page_alloc: add __free_pages() documentation
Provide some guidance towards when this might not be the right interface to use. Link: https://lkml.kernel.org/r/20201027025523.3235-1-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Vlastimil Babka
|
ec6e8c7e03 |
mm, page_alloc: disable pcplists during memory offline
Memory offlining relies on page isolation to guarantee a forward progress
because pages cannot be reused while they are isolated. But the page
isolation itself doesn't prevent from races while freed pages are stored
on pcp lists and thus can be reused. This can be worked around by
repeated draining of pcplists, as done by commit
|
||
|
Vlastimil Babka
|
7612921f23 |
mm, page_alloc: move draining pcplists to page isolation users
Currently, pcplists are drained during set_migratetype_isolate() which means once per pageblock processed start_isolate_page_range(). This is somewhat wasteful. Moreover, the callers might need different guarantees, and the draining is currently prone to races and does not guarantee that no page from isolated pageblock will end up on the pcplist after the drain. Better guarantees are added by later patches and require explicit actions by page isolation users that need them. Thus it makes sense to move the current imperfect draining to the callers also as a preparation step. Link: https://lkml.kernel.org/r/20201111092812.11329-7-vbabka@suse.cz Suggested-by: David Hildenbrand <david@redhat.com> Suggested-by: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Vlastimil Babka
|
952eaf8159 |
mm, page_alloc: cache pageset high and batch in struct zone
All per-cpu pagesets for a zone use the same high and batch values, that are duplicated there just for performance (locality) reasons. This patch adds the same variables also to struct zone as a shared copy. This will be useful later for making possible to disable pcplists temporarily by setting high value to 0, while remembering the values for restoring them later. But we can also immediately benefit from not updating pagesets of all possible cpus in case the newly recalculated values (after sysctl change or memory online/offline) are actually unchanged from the previous ones. Link: https://lkml.kernel.org/r/20201111092812.11329-6-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Vlastimil Babka
|
5c3ad2eb71 |
mm, page_alloc: simplify pageset_update()
pageset_update() attempts to update pcplist's high and batch values in a way that readers don't observe batch > high. It uses smp_wmb() to order the updates in a way to achieve this. However, without proper pairing read barriers in readers this guarantee doesn't hold, and there are no such barriers in e.g. free_unref_page_commit(). Commit |
||
|
Vlastimil Babka
|
69a8396a26 |
mm, page_alloc: remove setup_pageset()
We initialize boot-time pagesets with setup_pageset(), which sets high and batch values that effectively disable pcplists. We can remove this wrapper if we just set these values for all pagesets in pageset_init(). Non-boot pagesets then subsequently update them to the proper values. No functional change. Link: https://lkml.kernel.org/r/20201111092812.11329-4-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Vlastimil Babka
|
0a8b4f1d5b |
mm, page_alloc: calculate pageset high and batch once per zone
We currently call pageset_set_high_and_batch() for each possible cpu, which repeats the same calculations of high and batch values. Instead call the function just once per zone, and make it apply the calculated values to all per-cpu pagesets of the zone. This also allows removing the zone_pageset_init() and __zone_pcp_update() wrappers. No functional change. Link: https://lkml.kernel.org/r/20201111092812.11329-3-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Vlastimil Babka
|
7115ac6ef0 |
mm, page_alloc: clean up pageset high and batch update
Patch series "disable pcplists during memory offline", v3. As per the discussions [1] [2] this is an attempt to implement David's suggestion that page isolation should disable pcplists to avoid races with page freeing in progress. This is done without extra checks in fast paths, as explained in Patch 9. The repeated draining done by [2] is then no longer needed. Previous version (RFC) is at [3]. The RFC tried to hide pcplists disabling/enabling into page isolation, but it wasn't completely possible, as memory offline does not unisolation. Michal suggested an explicit API in [4] so that's the current implementation and it seems indeed nicer. Once we accept that page isolation users need to do explicit actions around it depending on the needed guarantees, we can also IMHO accept that the current pcplist draining can be also done by the callers, which is more effective. After all, there are only two users of page isolation. So patch 6 does effectively the same thing as Pavel proposed in [5], and patch 7 implement stronger guarantees only for memory offline. If CMA decides to opt-in to the stronger guarantee, it can be added later. Patches 1-5 are preparatory cleanups for pcplist disabling. Patchset was briefly tested in QEMU so that memory online/offline works, but I haven't done a stress test that would prove the race fixed by [2] is eliminated. Note that patch 7 could be avoided if we instead adjusted page freeing in shown in [6], but I believe the current implementation of disabling pcplists is not too much complex, so I would prefer this instead of adding new checks and longer irq-disabled section into page freeing hotpaths. [1] https://lore.kernel.org/linux-mm/20200901124615.137200-1-pasha.tatashin@soleen.com/ [2] https://lore.kernel.org/linux-mm/20200903140032.380431-1-pasha.tatashin@soleen.com/ [3] https://lore.kernel.org/linux-mm/20200907163628.26495-1-vbabka@suse.cz/ [4] https://lore.kernel.org/linux-mm/20200909113647.GG7348@dhcp22.suse.cz/ [5] https://lore.kernel.org/linux-mm/20200904151448.100489-3-pasha.tatashin@soleen.com/ [6] https://lore.kernel.org/linux-mm/3d3b53db-aeaa-ff24-260b-36427fac9b1c@suse.cz/ [7] https://lore.kernel.org/linux-mm/20200922143712.12048-1-vbabka@suse.cz/ [8] https://lore.kernel.org/linux-mm/20201008114201.18824-1-vbabka@suse.cz/ This patch (of 7): The updates to pcplists' high and batch values are handled by multiple functions that make the calculations hard to follow. Consolidate everything to pageset_set_high_and_batch() and remove pageset_set_batch() and pageset_set_high() wrappers. The only special case using one of the removed wrappers was: build_all_zonelists_init() setup_pageset() pageset_set_batch() which was hardcoding batch as 0, so we can just open-code a call to pageset_update() with constant parameters instead. No functional change. Link: https://lkml.kernel.org/r/20201111092812.11329-1-vbabka@suse.cz Link: https://lkml.kernel.org/r/20201111092812.11329-2-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mike Rapoport
|
77bc7fd607 |
mm: introduce debug_pagealloc_{map,unmap}_pages() helpers
Patch series "arch, mm: improve robustness of direct map manipulation", v7. During recent discussion about KVM protected memory, David raised a concern about usage of __kernel_map_pages() outside of DEBUG_PAGEALLOC scope [1]. Indeed, for architectures that define CONFIG_ARCH_HAS_SET_DIRECT_MAP it is possible that __kernel_map_pages() would fail, but since this function is void, the failure will go unnoticed. Moreover, there's lack of consistency of __kernel_map_pages() semantics across architectures as some guard this function with #ifdef DEBUG_PAGEALLOC, some refuse to update the direct map if page allocation debugging is disabled at run time and some allow modifying the direct map regardless of DEBUG_PAGEALLOC settings. This set straightens this out by restoring dependency of __kernel_map_pages() on DEBUG_PAGEALLOC and updating the call sites accordingly. Since currently the only user of __kernel_map_pages() outside DEBUG_PAGEALLOC is hibernation, it is updated to make direct map accesses there more explicit. [1] https://lore.kernel.org/lkml/2759b4bf-e1e3-d006-7d86-78a40348269d@redhat.com This patch (of 4): When CONFIG_DEBUG_PAGEALLOC is enabled, it unmaps pages from the kernel direct mapping after free_pages(). The pages than need to be mapped back before they could be used. Theese mapping operations use __kernel_map_pages() guarded with with debug_pagealloc_enabled(). The only place that calls __kernel_map_pages() without checking whether DEBUG_PAGEALLOC is enabled is the hibernation code that presumes availability of this function when ARCH_HAS_SET_DIRECT_MAP is set. Still, on arm64, __kernel_map_pages() will bail out when DEBUG_PAGEALLOC is not enabled but set_direct_map_invalid_noflush() may render some pages not present in the direct map and hibernation code won't be able to save such pages. To make page allocation debugging and hibernation interaction more robust, the dependency on DEBUG_PAGEALLOC or ARCH_HAS_SET_DIRECT_MAP has to be made more explicit. Start with combining the guard condition and the call to __kernel_map_pages() into debug_pagealloc_map_pages() and debug_pagealloc_unmap_pages() functions to emphasize that __kernel_map_pages() should not be called without DEBUG_PAGEALLOC and use these new functions to map/unmap pages when page allocation debugging is enabled. Link: https://lkml.kernel.org/r/20201109192128.960-1-rppt@kernel.org Link: https://lkml.kernel.org/r/20201109192128.960-2-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Len Brown <len.brown@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mike Rapoport
|
03e92a5e09 |
ia64: remove custom __early_pfn_to_nid()
The ia64 implementation of __early_pfn_to_nid() essentially relies on the same data as the generic implementation. The correspondence between memory ranges and nodes is set in memblock during early memory initialization in register_active_ranges() function. The initialization of sparsemem that requires early_pfn_to_nid() happens later and it can use the memblock information like the other architectures. Link: https://lkml.kernel.org/r/20201101170454.9567-3-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Meelis Roos <mroos@linux.ee> Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Daniel Vetter
|
f920e413ff |
mm: track mmu notifiers in fs_reclaim_acquire/release
fs_reclaim_acquire/release nicely catch recursion issues when allocating GFP_KERNEL memory against shrinkers (which gpu drivers tend to use to keep the excessive caches in check). For mmu notifier recursions we do have lockdep annotations since |
||
Shakeel Butt
|
f0c0c115fb |
mm: memcontrol: account pagetables per node
For many workloads, pagetable consumption is significant and it makes sense to expose it in the memory.stat for the memory cgroups. However at the moment, the pagetables are accounted per-zone. Converting them to per-node and using the right interface will correctly account for the memory cgroups as well. [akpm@linux-foundation.org: export __mod_lruvec_page_state to modules for arch/mips/kvm/] Link: https://lkml.kernel.org/r/20201130212541.2781790-3-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Roman Gushchin <guro@fb.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Jakub Kicinski
|
a1dd1d8697 |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-12-03
The main changes are:
1) Support BTF in kernel modules, from Andrii.
2) Introduce preferred busy-polling, from Björn.
3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh.
4) Memcg-based memory accounting for bpf objects, from Roman.
5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits)
selftests/bpf: Fix invalid use of strncat in test_sockmap
libbpf: Use memcpy instead of strncpy to please GCC
selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module
selftests/bpf: Add tp_btf CO-RE reloc test for modules
libbpf: Support attachment of BPF tracing programs to kernel modules
libbpf: Factor out low-level BPF program loading helper
bpf: Allow to specify kernel module BTFs when attaching BPF programs
bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier
selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF
selftests/bpf: Add support for marking sub-tests as skipped
selftests/bpf: Add bpf_testmod kernel module for testing
libbpf: Add kernel module BTF support for CO-RE relocations
libbpf: Refactor CO-RE relocs to not assume a single BTF object
libbpf: Add internal helper to load BTF data by FD
bpf: Keep module's btf_data_size intact after load
bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address()
selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP
bpf: Adds support for setting window clamp
samples/bpf: Fix spelling mistake "recieving" -> "receiving"
bpf: Fix cold build of test_progs-no_alu32
...
====================
Link: https://lore.kernel.org/r/20201204021936.85653-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
Roman Gushchin
|
18b2db3b03 |
mm: Convert page kmemcg type to a page memcg flag
PageKmemcg flag is currently defined as a page type (like buddy, offline, table and guard). Semantically it means that the page was accounted as a kernel memory by the page allocator and has to be uncharged on the release. As a side effect of defining the flag as a page type, the accounted page can't be mapped to userspace (look at page_has_type() and comments above). In particular, this blocks the accounting of vmalloc-backed memory used by some bpf maps, because these maps do map the memory to userspace. One option is to fix it by complicating the access to page->mapcount, which provides some free bits for page->page_type. But it's way better to move this flag into page->memcg_data flags. Indeed, the flag makes no sense without enabled memory cgroups and memory cgroup pointer set in particular. This commit replaces PageKmemcg() and __SetPageKmemcg() with PageMemcgKmem() and an open-coded OR operation setting the memcg pointer with the MEMCG_DATA_KMEM bit. __ClearPageKmemcg() can be simple deleted, as the whole memcg_data is zeroed at once. As a bonus, on !CONFIG_MEMCG build the PageMemcgKmem() check will be compiled out. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Link: https://lkml.kernel.org/r/20201027001657.3398190-5-guro@fb.com Link: https://lore.kernel.org/bpf/20201201215900.3569844-5-guro@fb.com |
||
|
Roman Gushchin
|
bcfe06bf26 |
mm: memcontrol: Use helpers to read page's memcg data
Patch series "mm: allow mapping accounted kernel pages to userspace", v6. Currently a non-slab kernel page which has been charged to a memory cgroup can't be mapped to userspace. The underlying reason is simple: PageKmemcg flag is defined as a page type (like buddy, offline, etc), so it takes a bit from a page->mapped counter. Pages with a type set can't be mapped to userspace. But in general the kmemcg flag has nothing to do with mapping to userspace. It only means that the page has been accounted by the page allocator, so it has to be properly uncharged on release. Some bpf maps are mapping the vmalloc-based memory to userspace, and their memory can't be accounted because of this implementation detail. This patchset removes this limitation by moving the PageKmemcg flag into one of the free bits of the page->mem_cgroup pointer. Also it formalizes accesses to the page->mem_cgroup and page->obj_cgroups using new helpers, adds several checks and removes a couple of obsolete functions. As the result the code became more robust with fewer open-coded bit tricks. This patch (of 4): Currently there are many open-coded reads of the page->mem_cgroup pointer, as well as a couple of read helpers, which are barely used. It creates an obstacle on a way to reuse some bits of the pointer for storing additional bits of information. In fact, we already do this for slab pages, where the last bit indicates that a pointer has an attached vector of objcg pointers instead of a regular memcg pointer. This commits uses 2 existing helpers and introduces a new helper to converts all read sides to calls of these helpers: struct mem_cgroup *page_memcg(struct page *page); struct mem_cgroup *page_memcg_rcu(struct page *page); struct mem_cgroup *page_memcg_check(struct page *page); page_memcg_check() is intended to be used in cases when the page can be a slab page and have a memcg pointer pointing at objcg vector. It does check the lowest bit, and if set, returns NULL. page_memcg() contains a VM_BUG_ON_PAGE() check for the page not being a slab page. To make sure nobody uses a direct access, struct page's mem_cgroup/obj_cgroups is converted to unsigned long memcg_data. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Link: https://lkml.kernel.org/r/20201027001657.3398190-1-guro@fb.com Link: https://lkml.kernel.org/r/20201027001657.3398190-2-guro@fb.com Link: https://lore.kernel.org/bpf/20201201215900.3569844-2-guro@fb.com |
||
Dongli Zhang
|
d8c19014bb |
page_frag: Recover from memory pressure
The ethernet driver may allocate skb (and skb->data) via napi_alloc_skb().
This ends up to page_frag_alloc() to allocate skb->data from
page_frag_cache->va.
During the memory pressure, page_frag_cache->va may be allocated as
pfmemalloc page. As a result, the skb->pfmemalloc is always true as
skb->data is from page_frag_cache->va. The skb will be dropped if the
sock (receiver) does not have SOCK_MEMALLOC. This is expected behaviour
under memory pressure.
However, once kernel is not under memory pressure any longer (suppose large
amount of memory pages are just reclaimed), the page_frag_alloc() may still
re-use the prior pfmemalloc page_frag_cache->va to allocate skb->data. As a
result, the skb->pfmemalloc is always true unless page_frag_cache->va is
re-allocated, even if the kernel is not under memory pressure any longer.
Here is how kernel runs into issue.
1. The kernel is under memory pressure and allocation of
PAGE_FRAG_CACHE_MAX_ORDER in __page_frag_cache_refill() will fail. Instead,
the pfmemalloc page is allocated for page_frag_cache->va.
2: All skb->data from page_frag_cache->va (pfmemalloc) will have
skb->pfmemalloc=true. The skb will always be dropped by sock without
SOCK_MEMALLOC. This is an expected behaviour.
3. Suppose a large amount of pages are reclaimed and kernel is not under
memory pressure any longer. We expect skb->pfmemalloc drop will not happen.
4. Unfortunately, page_frag_alloc() does not proactively re-allocate
page_frag_alloc->va and will always re-use the prior pfmemalloc page. The
skb->pfmemalloc is always true even kernel is not under memory pressure any
longer.
Fix this by freeing and re-allocating the page instead of recycling it.
References: https://lore.kernel.org/lkml/20201103193239.1807-1-dongli.zhang@oracle.com/
References: https://lore.kernel.org/linux-mm/20201105042140.5253-1-willy@infradead.org/
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Cc: Bert Barbe <bert.barbe@oracle.com>
Cc: Rama Nichanamatlu <rama.nichanamatlu@oracle.com>
Cc: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Cc: Manjunath Patil <manjunath.b.patil@oracle.com>
Cc: Joe Jin <joe.jin@oracle.com>
Cc: SRINIVAS <srinivas.eeda@oracle.com>
Fixes:
|
||
|
Linus Torvalds
|
c4cf498dc0 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "155 patches. Subsystems affected by this patch series: mm (dax, debug, thp, readahead, page-poison, util, memory-hotplug, zram, cleanups), misc, core-kernel, get_maintainer, MAINTAINERS, lib, bitops, checkpatch, binfmt, ramfs, autofs, nilfs, rapidio, panic, relay, kgdb, ubsan, romfs, and fault-injection" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (155 commits) lib, uaccess: add failure injection to usercopy functions lib, include/linux: add usercopy failure capability ROMFS: support inode blocks calculation ubsan: introduce CONFIG_UBSAN_LOCAL_BOUNDS for Clang sched.h: drop in_ubsan field when UBSAN is in trap mode scripts/gdb/tasks: add headers and improve spacing format scripts/gdb/proc: add struct mount & struct super_block addr in lx-mounts command kernel/relay.c: drop unneeded initialization panic: dump registers on panic_on_warn rapidio: fix the missed put_device() for rio_mport_add_riodev rapidio: fix error handling path nilfs2: fix some kernel-doc warnings for nilfs2 autofs: harden ioctl table ramfs: fix nommu mmap with gaps in the page cache mm: remove the now-unnecessary mmget_still_valid() hack mm/gup: take mmap_lock in get_dump_page() binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot coredump: rework elf/elf_fdpic vma_dump_size() into common helper coredump: refactor page range dumping into common helper coredump: let dump_emit() bail out on short writes ... |
||
|
Matthew Wilcox (Oracle)
|
ab130f9108 |
mm: rename page_order() to buddy_order()
The current page_order() can only be called on pages in the buddy allocator. For compound pages, you have to use compound_order(). This is confusing and led to a bug, so rename page_order() to buddy_order(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/20201001152259.14932-2-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
7fef431be9 |
mm/page_alloc: place pages to tail in __free_pages_core()
__free_pages_core() is used when exposing fresh memory to the buddy during system boot and when onlining memory in generic_online_page(). generic_online_page() is used in two cases: 1. Direct memory onlining in online_pages(). 2. Deferred memory onlining in memory-ballooning-like mechanisms (HyperV balloon and virtio-mem), when parts of a section are kept fake-offline to be fake-onlined later on. In 1, we already place pages to the tail of the freelist. Pages will be freed to MIGRATE_ISOLATE lists first and moved to the tail of the freelists via undo_isolate_page_range(). In 2, we currently don't implement a proper rule. In case of virtio-mem, where we currently always online MAX_ORDER - 1 pages, the pages will be placed to the HEAD of the freelist - undesireable. While the hyper-v balloon calls generic_online_page() with single pages, usually it will call it on successive single pages in a larger block. The pages are fresh, so place them to the tail of the freelist and avoid the PCP. In __free_pages_core(), remove the now superflouos call to set_page_refcounted() and add a comment regarding page initialization and the refcount. Note: In 2. we currently don't shuffle. If ever relevant (page shuffling is usually of limited use in virtualized environments), we might want to shuffle after a sequence of generic_online_page() calls in the relevant callers. Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com> Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Wei Liu <wei.liu@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Scott Cheloha <cheloha@linux.ibm.com> Link: https://lkml.kernel.org/r/20201005121534.15649-5-david@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
293ffa5ebb |
mm/page_alloc: move pages to tail in move_to_free_list()
Whenever we move pages between freelists via move_to_free_list()/ move_freepages_block(), we don't actually touch the pages: 1. Page isolation doesn't actually touch the pages, it simply isolates pageblocks and moves all free pages to the MIGRATE_ISOLATE freelist. When undoing isolation, we move the pages back to the target list. 2. Page stealing (steal_suitable_fallback()) moves free pages directly between lists without touching them. 3. reserve_highatomic_pageblock()/unreserve_highatomic_pageblock() moves free pages directly between freelists without touching them. We already place pages to the tail of the freelists when undoing isolation via __putback_isolated_page(), let's do it in any case (e.g., if order <= pageblock_order) and document the behavior. To simplify, let's move the pages to the tail for all move_to_free_list()/move_freepages_block() users. In 2., the target list is empty, so there should be no change. In 3., we might observe a change, however, highatomic is more concerned about allocations succeeding than cache hotness - if we ever realize this change degrades a workload, we can special-case this instance and add a proper comment. This change results in all pages getting onlined via online_pages() to be placed to the tail of the freelist. Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com> Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mike Rapoport <rppt@kernel.org> Cc: Scott Cheloha <cheloha@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Wei Liu <wei.liu@kernel.org> Link: https://lkml.kernel.org/r/20201005121534.15649-4-david@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |