2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 04:34:11 +08:00
Commit Graph

14 Commits

Author SHA1 Message Date
Ranjith Lohithakshan
419cc97d36 OMAP2/3 clock: Extend find_idlest() to pass back idle state value
Current implementation defines clock idle state indicators based on the
cpu information (cpu_is_omap24xx() or cpu_is_omap34xx()) in a system wide
manner. This patch extends the find_idlest() function in clkops to pass
back the idle state indicator for that clock, thus allowing idle state
indicators to be defined on a per clock basis if required.

This is specifically needed on AM35xx devices as the new IPSS clocks
indicates the idle status (0 is idle, 1 is ready) in a way just
opposite to how its handled in OMAP3 (0 is ready, 1 is idle).

Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com>
[paul@pwsan.com: updated to apply after commit 98c45457 et seq.]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24 12:05:54 -07:00
Paul Walmsley
feec1277a5 OMAP2/3/4 clock: omap2_clk_prepare_for_reboot() is OMAP2xxx-only
omap2_clk_prepare_for_reboot() is only applicable to OMAP2xxx chips,
so rename it to omap2xxx_clk_prepare_for_reboot() and only call it when
running on OMAP2xxx chips.  Remove the old stub in the OMAP3 clock code.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-29 10:14:22 -07:00
Paul Walmsley
da4d2904ab OMAP2/3 clock: remove unnecessary includes and clean up header
Now that almost all of the code has been removed from clock2xxx.c and
clock34xx.c, many of the includes are now unnecessary and can be removed.
While we're here, standardize the initial comment blocks.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Jouni Högander <jouni.hogander@nokia.com>
2010-01-29 10:14:22 -07:00
Paul Walmsley
4680c29f69 OMAP2/3 clock: clean up omap*_clk_arch_init()
In the OMAP3xxx clock code, remove the #ifdef CONFIG_ARCH_OMAP3 in
clock34xx.c, since this file is only compiled for OMAP3xxx builds.  Also,
rename omap2_clk_arch_init in this file to omap3xxx_clk_arch_init() to
pave the way for multi-OMAP kernels.  Ensure that it is not executed
on non-OMAP3xxx systems.

In the OMAP2xxx clock code, rename omap2_clk_arch_init in this file to
omap2xxx_clk_arch_init() to pave the way for multi-OMAP kernels.
Ensure that it is not executed on non-OMAP2xxx systems.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-29 10:14:22 -07:00
Paul Walmsley
6ebe0d88f5 OMAP2 clock: don't compile OMAP2430-only functions on non-2430 builds
omap2430_clk_i2chs_find_idlest() doesn't need to be compiled in on
non-2430 builds, so skip it in those cases to save memory.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-28 18:13:50 -07:00
Paul Walmsley
44da0a5103 OMAP2xxx clock: move sys_clk code into mach-omap2/clkt2xxx_sys.c
Move the sys_clk clock functions from clock2xxx.c to
mach-omap2/clkt2xxx_sys.c.  This is intended to make the clock code
easier to understand, since all of the functions needed to manage the
sys_clk are now located in their own file, rather than being mixed
with other, unrelated functions.

Clock debugging is also now more finely-grained, since the DEBUG
macro can now be defined for the sys_clk clock alone.  This
should reduce unnecessary console noise when debugging.

Also, if at some future point the mach-omap2/ directory is split into
OMAP2/3/4 variants, this clkt file can be placed in the mach-omap2xxx/
directory, rather than shared with other chip types that don't use
this clock type.

Thanks to Alexander Shishkin <virtuoso@slind.org> for his comments to
improve the patch description.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Alexander Shishkin <virtuoso@slind.org>
2010-01-28 18:13:49 -07:00
Paul Walmsley
87a1b26c2d OMAP2xxx clock: move osc_clk code into mach-omap2/clkt2xxx_osc.c
Move the osc_clk clock functions from clock2xxx.c to
mach-omap2/clkt2xxx_osc.  This is intended to make the clock code
easier to understand, since all of the functions needed to manage the
osc_clk are now located in their own file, rather than being mixed
with other, unrelated functions.

Clock debugging is also now more finely-grained, since the DEBUG
macro can now be defined for osc_clk clocks alone.  This
should reduce unnecessary console noise when debugging.

Also, if at some future point the mach-omap2/ directory is split
into OMAP2/3/4 variants, this clkt file can be placed in the mach-omap2xxx/
directory, rather than shared with other chip types that don't use this
clock type.

Thanks to Alexander Shishkin <virtuoso@slind.org> for his comments to
improve the patch description.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Alexander Shishkin <virtuoso@slind.org>
2010-01-28 18:13:49 -07:00
Paul Walmsley
49214640f5 OMAP2xxx clock: move the APLL clock code into mach-omap2/clkt2xxx_apll.c
Move the APLL-related clock functions from clock2xxx.c to
mach-omap2/clkt2xxx_apll.c.  This is intended to make the clock code
easier to understand, since all of the functions needed to manage APLLs
are now located in their own file, rather than being mixed with other,
unrelated functions.

Clock debugging is also now more finely-grained, since the DEBUG
macro can now be defined for APLL clocks alone.  This
should reduce unnecessary console noise when debugging.

Also, if at some future point the mach-omap2/ directory is split
into OMAP2/3/4 variants, this clkt file can be placed in the mach-omap2xxx/
directory, rather than shared with other chip types that don't use this
clock type.

Thanks to Alexander Shishkin <virtuoso@slind.org> for his comments to
improve the patch description.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Alexander Shishkin <virtuoso@slind.org>
2010-01-28 18:13:49 -07:00
Paul Walmsley
734f69a773 OMAP2xxx clock: move the DVFS virtual clock code into mach-omap2/clkt2xxx_virt_prcm_set.c
Move the DVFS virtual clock functions from clock2xxx.c to
mach-omap2/clkt2xxx_virt_prcm_set.c.  This is intended to make the
clock code easier to understand, since all of the functions needed to
manage the virt_prcm_set clock are now located in their own file,
rather than being mixed with other, unrelated functions.

Clock debugging is also now more finely-grained, since the DEBUG macro
can now be defined for the virt_prcm_set clock alone.  This should
reduce unnecessary console noise when debugging.

Also, if at some future point the mach-omap2/ directory is split into
OMAP2/3/4 variants, this clkt file can be placed in the mach-omap2xxx/
directory, rather than shared with other chip types that don't use
this clock type.

Thanks to Alexander Shishkin <virtuoso@slind.org> for his comments.
Thanks also to Kevin Hilman <khilman@deeprootsystems.com> for finding
and fixing a bug with the CONFIG_CPU_FREQ portion of this patch.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Alexander Shishkin <virtuoso@slind.org>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-01-26 20:13:06 -07:00
Paul Walmsley
b1823d8616 OMAP2xxx clock: move the DPLL+CORE composite clock code into mach-omap2/clkt2xxx_dpllcore.c
Move the DPLL+CORE composite clock functions from clock2xxx.c to
mach-omap2/clkt2xxx_dpllcore.c.  This is intended to make the clock
code easier to understand, since all of the functions needed to manage
the OMAP2 DPLL+CORE clock are now located in their own file, rather
than being mixed with other, unrelated functions.

Clock debugging is also now more finely-grained, since the DEBUG
macro can now be defined for the DPLL+CORE clock alone.  This
should reduce unnecessary console noise when debugging.

Also, if at some future point the mach-omap2/ directory is split
into OMAP2/3/4 variants, this clkt file can be placed in the mach-omap2xxx/
directory, rather than shared with other chip types that don't use this
clock type.

Thanks to Alexander Shishkin <virtuoso@slind.org> for his comments to
improve the patch description.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Alexander Shishkin <virtuoso@slind.org>
2010-01-26 20:13:06 -07:00
Paul Walmsley
69ecefca51 OMAP2/3/4 clock: combine all omap2_clk_functions
The struct clk_functions for OMAP2, 3, and 4 are all essentially the
same, so combine them.  This removes one multi-OMAP kernel impediment
and saves memory on multi-OMAP builds.

The stubs for omap2_clk_{init,exit}_cpufreq() code will removed once
the OPP layer code that's currently in Kevin's PM branch is merged.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-01-26 20:13:04 -07:00
Paul Walmsley
cdf1a91556 OMAP2 clock: dynamically allocate CPUFreq frequency table
Dynamically allocate the CPUFreq frequency table on OMAP2xxx chips.
This fixes some compilation problems, since the kernel may not know
what chip it is running on until boot-time.  This also reduces the size
of the CPUFreq frequency table.

Problem originally reported by Felipe Balbi <felipe.balbi@nokia.com>.
Thanks also for comments on the patch from Felipe and Kevin.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-01-08 15:23:17 -07:00
Felipe Balbi
19fe458310 OMAP2xxx clock: clk2xxx.c doesn't compile if CPUFREQ is enabled
if we enable CPUFREQ we can't build omap2 for two reasons,
one of them is fixed by the patch below.

It's failing because the __must_be_array() check in
ARRAY_SIZE() is failing and printing the following message:

arch/arm/mach-omap2/clock2xxx.c:453: error: negative width in bit-field '<anonymous>'

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
[paul@pwsan.com: commit message updated; changed rate variable name]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-08 15:23:15 -07:00
Paul Walmsley
d8a944582d OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx*
The OMAP2 clock code currently #includes a large .h file full of static
data structures.  Instead, define the data in a .c file.

Russell King <linux@arm.linux.org.uk> proposed this new arrangement:

    http://marc.info/?l=linux-omap&m=125967425908895&w=2

This patch also deals with most of the flagrant checkpatch violations.

While here, separate the prcm_config data structures out into their own
files, opp2xxx.h and opp24{2,3}0_data.c, and only build in the OPP tables
for the target device.  This should save some memory.  In the long run,
these prcm_config tables should be replaced with OPP code.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Nishanth Menon <nm@ti.com>
2009-12-11 16:16:00 -07:00