- Clean up SCHED_DEBUG: move the decades old mess of sysctl, procfs and debugfs interfaces
to a unified debugfs interface.
- Signals: Allow caching one sigqueue object per task, to improve performance & latencies.
- Improve newidle_balance() irq-off latencies on systems with a large number of CPU cgroups.
- Improve energy-aware scheduling
- Improve the PELT metrics for certain workloads
- Reintroduce select_idle_smt() to improve load-balancing locality - but without the previous
regressions
- Add 'scheduler latency debugging': warn after long periods of pending need_resched. This
is an opt-in feature that requires the enabling of the LATENCY_WARN scheduler feature,
or the use of the resched_latency_warn_ms=xx boot parameter.
- CPU hotplug fixes for HP-rollback, and for the 'fail' interface. Fix remaining
balance_push() vs. hotplug holes/races
- PSI fixes, plus allow /proc/pressure/ files to be written by CAP_SYS_RESOURCE tasks as well
- Fix/improve various load-balancing corner cases vs. capacity margins
- Fix sched topology on systems with NUMA diameter of 3 or above
- Fix PF_KTHREAD vs to_kthread() race
- Minor rseq optimizations
- Misc cleanups, optimizations, fixes and smaller updates
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=E7mz
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Clean up SCHED_DEBUG: move the decades old mess of sysctl, procfs and
debugfs interfaces to a unified debugfs interface.
- Signals: Allow caching one sigqueue object per task, to improve
performance & latencies.
- Improve newidle_balance() irq-off latencies on systems with a large
number of CPU cgroups.
- Improve energy-aware scheduling
- Improve the PELT metrics for certain workloads
- Reintroduce select_idle_smt() to improve load-balancing locality -
but without the previous regressions
- Add 'scheduler latency debugging': warn after long periods of pending
need_resched. This is an opt-in feature that requires the enabling of
the LATENCY_WARN scheduler feature, or the use of the
resched_latency_warn_ms=xx boot parameter.
- CPU hotplug fixes for HP-rollback, and for the 'fail' interface. Fix
remaining balance_push() vs. hotplug holes/races
- PSI fixes, plus allow /proc/pressure/ files to be written by
CAP_SYS_RESOURCE tasks as well
- Fix/improve various load-balancing corner cases vs. capacity margins
- Fix sched topology on systems with NUMA diameter of 3 or above
- Fix PF_KTHREAD vs to_kthread() race
- Minor rseq optimizations
- Misc cleanups, optimizations, fixes and smaller updates
* tag 'sched-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits)
cpumask/hotplug: Fix cpu_dying() state tracking
kthread: Fix PF_KTHREAD vs to_kthread() race
sched/debug: Fix cgroup_path[] serialization
sched,psi: Handle potential task count underflow bugs more gracefully
sched: Warn on long periods of pending need_resched
sched/fair: Move update_nohz_stats() to the CONFIG_NO_HZ_COMMON block to simplify the code & fix an unused function warning
sched/debug: Rename the sched_debug parameter to sched_verbose
sched,fair: Alternative sched_slice()
sched: Move /proc/sched_debug to debugfs
sched,debug: Convert sysctl sched_domains to debugfs
debugfs: Implement debugfs_create_str()
sched,preempt: Move preempt_dynamic to debug.c
sched: Move SCHED_DEBUG sysctl to debugfs
sched: Don't make LATENCYTOP select SCHED_DEBUG
sched: Remove sched_schedstats sysctl out from under SCHED_DEBUG
sched/numa: Allow runtime enabling/disabling of NUMA balance without SCHED_DEBUG
sched: Use cpu_dying() to fix balance_push vs hotplug-rollback
cpumask: Introduce DYING mask
cpumask: Make cpu_{online,possible,present,active}() inline
rseq: Optimise rseq_get_rseq_cs() and clear_rseq_cs()
...
- rtmutex cleanup & spring cleaning pass that removes ~400 lines of code
- Futex simplifications & cleanups
- Add debugging to the CSD code, to help track down a tenacious race (or hw problem)
- Add lockdep_assert_not_held(), to allow code to require a lock to not be held,
and propagate this into the ath10k driver
- Misc LKMM documentation updates
- Misc KCSAN updates: cleanups & documentation updates
- Misc fixes and cleanups
- Fix locktorture bugs with ww_mutexes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=cOOk
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- rtmutex cleanup & spring cleaning pass that removes ~400 lines of
code
- Futex simplifications & cleanups
- Add debugging to the CSD code, to help track down a tenacious race
(or hw problem)
- Add lockdep_assert_not_held(), to allow code to require a lock to not
be held, and propagate this into the ath10k driver
- Misc LKMM documentation updates
- Misc KCSAN updates: cleanups & documentation updates
- Misc fixes and cleanups
- Fix locktorture bugs with ww_mutexes
* tag 'locking-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
kcsan: Fix printk format string
static_call: Relax static_call_update() function argument type
static_call: Fix unused variable warn w/o MODULE
locking/rtmutex: Clean up signal handling in __rt_mutex_slowlock()
locking/rtmutex: Restrict the trylock WARN_ON() to debug
locking/rtmutex: Fix misleading comment in rt_mutex_postunlock()
locking/rtmutex: Consolidate the fast/slowpath invocation
locking/rtmutex: Make text section and inlining consistent
locking/rtmutex: Move debug functions as inlines into common header
locking/rtmutex: Decrapify __rt_mutex_init()
locking/rtmutex: Remove pointless CONFIG_RT_MUTEXES=n stubs
locking/rtmutex: Inline chainwalk depth check
locking/rtmutex: Move rt_mutex_debug_task_free() to rtmutex.c
locking/rtmutex: Remove empty and unused debug stubs
locking/rtmutex: Consolidate rt_mutex_init()
locking/rtmutex: Remove output from deadlock detector
locking/rtmutex: Remove rtmutex deadlock tester leftovers
locking/rtmutex: Remove rt_mutex_timed_lock()
MAINTAINERS: Add myself as futex reviewer
locking/mutex: Remove repeated declaration
...
- Add idle states table for IceLake-D to the intel_idle driver and
update IceLake-X C6 data in it (Artem Bityutskiy).
- Fix the C7 idle state on Tegra114 in the tegra cpuidle driver and
drop the unused do_idle() firmware call from it (Dmitry Osipenko).
- Fix cpuidle-qcom-spm Kconfig entry (He Ying).
- Fix handling of possible negative tick_nohz_get_next_hrtimer()
return values of in cpuidle governors (Rafael Wysocki).
- Add support for frequency-invariance to the ACPI CPPC cpufreq
driver and update the frequency-invariance engine (FIE) to use it
as needed (Viresh Kumar).
- Simplify the default delay_us setting in the ACPI CPPC cpufreq
driver (Tom Saeger).
- Clean up frequency-related computations in the intel_pstate
cpufreq driver (Rafael Wysocki).
- Fix TBG parent setting for load levels in the armada-37xx
cpufreq driver and drop the CPU PM clock .set_parent method for
armada-37xx (Marek Behún).
- Fix multiple issues in the armada-37xx cpufreq driver (Pali Rohár).
- Fix handling of dev_pm_opp_of_cpumask_add_table() return values
in cpufreq-dt to take the -EPROBE_DEFER one into acconut as
appropriate (Quanyang Wang).
- Fix format string in ia64-acpi-cpufreq (Sergei Trofimovich).
- Drop the unused for_each_policy() macro from cpufreq (Shaokun
Zhang).
- Simplify computations in the schedutil cpufreq governor to avoid
unnecessary overhead (Yue Hu).
- Fix typos in the s5pv210 cpufreq driver (Bhaskar Chowdhury).
- Fix cpufreq documentation links in Kconfig (Alexander Monakov).
- Fix PCI device power state handling in pci_enable_device_flags()
to avoid issuse in some cases when the device depends on an ACPI
power resource (Rafael Wysocki).
- Add missing documentation of pm_runtime_resume_and_get() (Alan
Stern).
- Add missing static inline stub for pm_runtime_has_no_callbacks()
to pm_runtime.h and drop the unused try_to_freeze_nowarn()
definition (YueHaibing).
- Drop duplicate struct device declaration from pm.h and fix a
structure type declaration in intel_rapl.h (Wan Jiabing).
- Use dev_set_name() instead of an open-coded equivalent of it in
the wakeup sources code and drop a redundant local variable
initialization from it (Andy Shevchenko, Colin Ian King).
- Use crc32 instead of md5 for e820 memory map integrity check
during resume from hibernation on x86 (Chris von Recklinghausen).
- Fix typos in comments in the system-wide and hibernation support
code (Lu Jialin).
- Modify the generic power domains (genpd) code to avoid resuming
devices in the "prepare" phase of system-wide suspend and
hibernation (Ulf Hansson).
- Add Hygon Fam18h RAPL support to the intel_rapl power capping
driver (Pu Wen).
- Add MAINTAINERS entry for the dynamic thermal power management
(DTPM) code (Daniel Lezcano).
- Add devm variants of operating performance points (OPP) API
functions and switch over some users of the OPP framework to
the new resource-managed API (Yangtao Li and Dmitry Osipenko).
- Update devfreq core:
* Register devfreq devices as cooling devices on demand (Daniel
Lezcano).
* Add missing unlock opeation in devfreq_add_device() (Lukasz
Luba).
* Use the next frequency as resume_freq instead of the previous
frequency when using the opp-suspend property (Dong Aisheng).
* Check get_dev_status in devfreq_update_stats() (Dong Aisheng).
* Fix set_freq path for the userspace governor in Kconfig (Dong
Aisheng).
* Remove invalid description of get_target_freq() (Dong Aisheng).
- Update devfreq drivers:
* imx8m-ddrc: Remove imx8m_ddrc_get_dev_status() and unneeded
of_match_ptr() (Dong Aisheng, Fabio Estevam).
* rk3399_dmc: dt-bindings: Add rockchip,pmu phandle and drop
references to undefined symbols (Enric Balletbo i Serra, Gaël
PORTAY).
* rk3399_dmc: Use dev_err_probe() to simplify the code (Krzysztof
Kozlowski).
* imx-bus: Remove unneeded of_match_ptr() (Fabio Estevam).
- Fix kernel-doc warnings in three places (Pierre-Louis Bossart).
- Fix typo in the pm-graph utility code (Ricardo Ribalda).
-----BEGIN PGP SIGNATURE-----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=t+SG
-----END PGP SIGNATURE-----
Merge tag 'pm-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add some new hardware support (for example, IceLake-D idle
states in intel_idle), fix some issues (for example, the handling of
negative "sleep length" values in cpuidle governors), add new
functionality to the existing drivers (for example, scale-invariance
support in the ACPI CPPC cpufreq driver) and clean up code all over.
Specifics:
- Add idle states table for IceLake-D to the intel_idle driver and
update IceLake-X C6 data in it (Artem Bityutskiy).
- Fix the C7 idle state on Tegra114 in the tegra cpuidle driver and
drop the unused do_idle() firmware call from it (Dmitry Osipenko).
- Fix cpuidle-qcom-spm Kconfig entry (He Ying).
- Fix handling of possible negative tick_nohz_get_next_hrtimer()
return values of in cpuidle governors (Rafael Wysocki).
- Add support for frequency-invariance to the ACPI CPPC cpufreq
driver and update the frequency-invariance engine (FIE) to use it
as needed (Viresh Kumar).
- Simplify the default delay_us setting in the ACPI CPPC cpufreq
driver (Tom Saeger).
- Clean up frequency-related computations in the intel_pstate cpufreq
driver (Rafael Wysocki).
- Fix TBG parent setting for load levels in the armada-37xx cpufreq
driver and drop the CPU PM clock .set_parent method for armada-37xx
(Marek Behún).
- Fix multiple issues in the armada-37xx cpufreq driver (Pali Rohár).
- Fix handling of dev_pm_opp_of_cpumask_add_table() return values in
cpufreq-dt to take the -EPROBE_DEFER one into acconut as
appropriate (Quanyang Wang).
- Fix format string in ia64-acpi-cpufreq (Sergei Trofimovich).
- Drop the unused for_each_policy() macro from cpufreq (Shaokun
Zhang).
- Simplify computations in the schedutil cpufreq governor to avoid
unnecessary overhead (Yue Hu).
- Fix typos in the s5pv210 cpufreq driver (Bhaskar Chowdhury).
- Fix cpufreq documentation links in Kconfig (Alexander Monakov).
- Fix PCI device power state handling in pci_enable_device_flags() to
avoid issuse in some cases when the device depends on an ACPI power
resource (Rafael Wysocki).
- Add missing documentation of pm_runtime_resume_and_get() (Alan
Stern).
- Add missing static inline stub for pm_runtime_has_no_callbacks() to
pm_runtime.h and drop the unused try_to_freeze_nowarn() definition
(YueHaibing).
- Drop duplicate struct device declaration from pm.h and fix a
structure type declaration in intel_rapl.h (Wan Jiabing).
- Use dev_set_name() instead of an open-coded equivalent of it in the
wakeup sources code and drop a redundant local variable
initialization from it (Andy Shevchenko, Colin Ian King).
- Use crc32 instead of md5 for e820 memory map integrity check during
resume from hibernation on x86 (Chris von Recklinghausen).
- Fix typos in comments in the system-wide and hibernation support
code (Lu Jialin).
- Modify the generic power domains (genpd) code to avoid resuming
devices in the "prepare" phase of system-wide suspend and
hibernation (Ulf Hansson).
- Add Hygon Fam18h RAPL support to the intel_rapl power capping
driver (Pu Wen).
- Add MAINTAINERS entry for the dynamic thermal power management
(DTPM) code (Daniel Lezcano).
- Add devm variants of operating performance points (OPP) API
functions and switch over some users of the OPP framework to the
new resource-managed API (Yangtao Li and Dmitry Osipenko).
- Update devfreq core:
* Register devfreq devices as cooling devices on demand (Daniel
Lezcano).
* Add missing unlock opeation in devfreq_add_device() (Lukasz
Luba).
* Use the next frequency as resume_freq instead of the previous
frequency when using the opp-suspend property (Dong Aisheng).
* Check get_dev_status in devfreq_update_stats() (Dong Aisheng).
* Fix set_freq path for the userspace governor in Kconfig (Dong
Aisheng).
* Remove invalid description of get_target_freq() (Dong Aisheng).
- Update devfreq drivers:
* imx8m-ddrc: Remove imx8m_ddrc_get_dev_status() and unneeded
of_match_ptr() (Dong Aisheng, Fabio Estevam).
* rk3399_dmc: dt-bindings: Add rockchip,pmu phandle and drop
references to undefined symbols (Enric Balletbo i Serra, Gaël
PORTAY).
* rk3399_dmc: Use dev_err_probe() to simplify the code (Krzysztof
Kozlowski).
* imx-bus: Remove unneeded of_match_ptr() (Fabio Estevam).
- Fix kernel-doc warnings in three places (Pierre-Louis Bossart).
- Fix typo in the pm-graph utility code (Ricardo Ribalda)"
* tag 'pm-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
PM: wakeup: remove redundant assignment to variable retval
PM: hibernate: x86: Use crc32 instead of md5 for hibernation e820 integrity check
cpufreq: Kconfig: fix documentation links
PM: wakeup: use dev_set_name() directly
PM: runtime: Add documentation for pm_runtime_resume_and_get()
cpufreq: intel_pstate: Simplify intel_pstate_update_perf_limits()
cpufreq: armada-37xx: Fix module unloading
cpufreq: armada-37xx: Remove cur_frequency variable
cpufreq: armada-37xx: Fix determining base CPU frequency
cpufreq: armada-37xx: Fix driver cleanup when registration failed
clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0
clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz
cpufreq: armada-37xx: Fix the AVS value for load L1
clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock
cpufreq: armada-37xx: Fix setting TBG parent for load levels
cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration
cpuidle: tegra: Remove do_idle firmware call
cpuidle: tegra: Fix C7 idling state on Tegra114
PM: sleep: fix typos in comments
cpufreq: Remove unused for_each_policy macro
...
Core changes:
- Provide IRQF_NO_AUTOEN as a flag for request*_irq() so drivers can be
cleaned up which either use a seperate mechanism to prevent auto-enable
at request time or have a racy mechanism which disables the interrupt
right after request.
- Get rid of the last usage of irq_create_identity_mapping() and remove
the interface.
- An overhaul of tasklet_disable(). Most usage sites of tasklet_disable()
are in task context and usually in cleanup, teardown code pathes.
tasklet_disable() spinwaits for a tasklet which is currently executed.
That's not only a problem for PREEMPT_RT where this can lead to a live
lock when the disabling task preempts the softirq thread. It's also
problematic in context of virtualization when the vCPU which runs the
tasklet is scheduled out and the disabling code has to spin wait until
it's scheduled back in. Though there are a few code pathes which invoke
tasklet_disable() from non-sleepable context. For these a new disable
variant which still spinwaits is provided which allows to switch
tasklet_disable() to a sleep wait mechanism. For the atomic use cases
this does not solve the live lock issue on PREEMPT_RT. That is mitigated
by blocking on the RT specific softirq lock.
- The PREEMPT_RT specific implementation of softirq processing and
local_bh_disable/enable().
On RT enabled kernels soft interrupt processing happens always in task
context and all interrupt handlers, which are not explicitly marked to
be invoked in hard interrupt context are forced into task context as
well. This allows to protect against softirq processing with a per
CPU lock, which in turn allows to make BH disabled regions preemptible.
Most of the softirq handling code is still shared. The RT/non-RT
specific differences are addressed with a set of inline functions which
provide the context specific functionality. The local_bh_disable() /
local_bh_enable() mechanism are obviously seperate.
- The usual set of small improvements and cleanups
Driver changes:
- New drivers for Nuvoton WPCM450 and DT 79rc3243x interrupt controllers
- Extended functionality for MStar, STM32 and SC7280 irq chips
- Enhanced robustness for ARM GICv3/4.1 drivers
- The usual set of cleanups and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=id4G
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"The usual updates from the irq departement:
Core changes:
- Provide IRQF_NO_AUTOEN as a flag for request*_irq() so drivers can
be cleaned up which either use a seperate mechanism to prevent
auto-enable at request time or have a racy mechanism which disables
the interrupt right after request.
- Get rid of the last usage of irq_create_identity_mapping() and
remove the interface.
- An overhaul of tasklet_disable().
Most usage sites of tasklet_disable() are in task context and
usually in cleanup, teardown code pathes. tasklet_disable()
spinwaits for a tasklet which is currently executed. That's not
only a problem for PREEMPT_RT where this can lead to a live lock
when the disabling task preempts the softirq thread. It's also
problematic in context of virtualization when the vCPU which runs
the tasklet is scheduled out and the disabling code has to spin
wait until it's scheduled back in.
There are a few code pathes which invoke tasklet_disable() from
non-sleepable context. For these a new disable variant which still
spinwaits is provided which allows to switch tasklet_disable() to a
sleep wait mechanism. For the atomic use cases this does not solve
the live lock issue on PREEMPT_RT. That is mitigated by blocking on
the RT specific softirq lock.
- The PREEMPT_RT specific implementation of softirq processing and
local_bh_disable/enable().
On RT enabled kernels soft interrupt processing happens always in
task context and all interrupt handlers, which are not explicitly
marked to be invoked in hard interrupt context are forced into task
context as well. This allows to protect against softirq processing
with a per CPU lock, which in turn allows to make BH disabled
regions preemptible.
Most of the softirq handling code is still shared. The RT/non-RT
specific differences are addressed with a set of inline functions
which provide the context specific functionality. The
local_bh_disable() / local_bh_enable() mechanism are obviously
seperate.
- The usual set of small improvements and cleanups
Driver changes:
- New drivers for Nuvoton WPCM450 and DT 79rc3243x interrupt
controllers
- Extended functionality for MStar, STM32 and SC7280 irq chips
- Enhanced robustness for ARM GICv3/4.1 drivers
- The usual set of cleanups and improvements all over the place"
* tag 'irq-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
irqchip/xilinx: Expose Kconfig option for Zynq/ZynqMP
irqchip/gic-v3: Do not enable irqs when handling spurious interrups
dt-bindings: interrupt-controller: Add IDT 79RC3243x Interrupt Controller
irqchip: Add support for IDT 79rc3243x interrupt controller
irqdomain: Drop references to recusive irqdomain setup
irqdomain: Get rid of irq_create_strict_mappings()
irqchip/jcore-aic: Kill use of irq_create_strict_mappings()
ARM: PXA: Kill use of irq_create_strict_mappings()
irqchip/gic-v4.1: Disable vSGI upon (GIC CPUIF < v4.1) detection
irqchip/tb10x: Use 'fallthrough' to eliminate a warning
genirq: Reduce irqdebug cacheline bouncing
kernel: Initialize cpumask before parsing
irqchip/wpcm450: Drop COMPILE_TEST
irqchip/irq-mst: Support polarity configuration
irqchip: Add driver for WPCM450 interrupt controller
dt-bindings: interrupt-controller: Add nuvoton, wpcm450-aic
dt-bindings: qcom,pdc: Add compatible for sc7280
irqchip/stm32: Add usart instances exti direct event support
irqchip/gic-v3: Fix OF_BAD_ADDR error handling
irqchip/sifive-plic: Mark two global variables __ro_after_init
...
The kthread_is_per_cpu() construct relies on only being called on
PF_KTHREAD tasks (per the WARN in to_kthread). This gives rise to the
following usage pattern:
if ((p->flags & PF_KTHREAD) && kthread_is_per_cpu(p))
However, as reported by syzcaller, this is broken. The scenario is:
CPU0 CPU1 (running p)
(p->flags & PF_KTHREAD) // true
begin_new_exec()
me->flags &= ~(PF_KTHREAD|...);
kthread_is_per_cpu(p)
to_kthread(p)
WARN(!(p->flags & PF_KTHREAD) <-- *SPLAT*
Introduce __to_kthread() that omits the WARN and is sure to check both
values.
Use this to remove the problematic pattern for kthread_is_per_cpu()
and fix a number of other kthread_*() functions that have similar
issues but are currently not used in ways that would expose the
problem.
Notably kthread_func() is only ever called on 'current', while
kthread_probe_data() is only used for PF_WQ_WORKER, which implies the
task is from kthread_create*().
Fixes: ac687e6e8c ("kthread: Extract KTHREAD_IS_PER_CPU")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <Valentin.Schneider@arm.com>
Link: https://lkml.kernel.org/r/YH6WJc825C4P0FCK@hirez.programming.kicks-ass.net
The handling of sysrq key can be activated by echoing the key to
/proc/sysrq-trigger or via the magic key sequence typed into a terminal
that is connected to the system in some way (serial, USB or other mean).
In the former case, the handling is done in a user context. In the
latter case, it is likely to be in an interrupt context.
Currently in print_cpu() of kernel/sched/debug.c, sched_debug_lock is
taken with interrupt disabled for the whole duration of the calls to
print_*_stats() and print_rq() which could last for the quite some time
if the information dump happens on the serial console.
If the system has many cpus and the sched_debug_lock is somehow busy
(e.g. parallel sysrq-t), the system may hit a hard lockup panic
depending on the actually serial console implementation of the
system.
The purpose of sched_debug_lock is to serialize the use of the global
cgroup_path[] buffer in print_cpu(). The rests of the printk calls don't
need serialization from sched_debug_lock.
Calling printk() with interrupt disabled can still be problematic if
multiple instances are running. Allocating a stack buffer of PATH_MAX
bytes is not feasible because of the limited size of the kernel stack.
The solution implemented in this patch is to allow only one caller at a
time to use the full size group_path[], while other simultaneous callers
will have to use shorter stack buffers with the possibility of path
name truncation. A "..." suffix will be printed if truncation may have
happened. The cgroup path name is provided for informational purpose
only, so occasional path name truncation should not be a big problem.
Fixes: efe25c2c7b ("sched: Reinstate group names in /proc/sched_debug")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210415195426.6677-1-longman@redhat.com
psi_group_cpu->tasks, represented by the unsigned int, stores the
number of tasks that could be stalled on a psi resource(io/mem/cpu).
Decrementing these counters at zero leads to wrapping which further
leads to the psi_group_cpu->state_mask is being set with the
respective pressure state. This could result into the unnecessary time
sampling for the pressure state thus cause the spurious psi events.
This can further lead to wrong actions being taken at the user land
based on these psi events.
Though psi_bug is set under these conditions but that just for debug
purpose. Fix it by decrementing the ->tasks count only when it is
non-zero.
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/1618585336-37219-1-git-send-email-charante@codeaurora.org
CPU scheduler marks need_resched flag to signal a schedule() on a
particular CPU. But, schedule() may not happen immediately in cases
where the current task is executing in the kernel mode (no
preemption state) for extended periods of time.
This patch adds a warn_on if need_resched is pending for more than the
time specified in sysctl resched_latency_warn_ms. If it goes off, it is
likely that there is a missing cond_resched() somewhere. Monitoring is
done via the tick and the accuracy is hence limited to jiffy scale. This
also means that we won't trigger the warning if the tick is disabled.
This feature (LATENCY_WARN) is default disabled.
Signed-off-by: Paul Turner <pjt@google.com>
Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210416212936.390566-1-joshdon@google.com
When !CONFIG_NO_HZ_COMMON we get this new GCC warning:
kernel/sched/fair.c:8398:13: warning: ‘update_nohz_stats’ defined but not used [-Wunused-function]
Move update_nohz_stats() to an already existing CONFIG_NO_HZ_COMMON #ifdef
block.
Beyond fixing the GCC warning, this also simplifies the update_nohz_stats() function.
[ mingo: Rewrote the changelog. ]
Fixes: 0826530de3 ("sched/fair: Remove update of blocked load from newidle_balance")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20210329144029.29200-1-yuehaibing@huawei.com
CONFIG_SCHED_DEBUG is the build-time Kconfig knob, the boot param
sched_debug and the /debug/sched/debug_enabled knobs control the
sched_debug_enabled variable, but what they really do is make
SCHED_DEBUG more verbose, so rename the lot.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
The current sched_slice() seems to have issues; there's two possible
things that could be improved:
- the 'nr_running' used for __sched_period() is daft when cgroups are
considered. Using the RQ wide h_nr_running seems like a much more
consistent number.
- (esp) cgroups can slice it real fine, which makes for easy
over-scheduling, ensure min_gran is what the name says.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210412102001.611897312@infradead.org
Move the #ifdef SCHED_DEBUG bits to kernel/sched/debug.c in order to
collect all the debugfs bits.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210412102001.353833279@infradead.org
Stop polluting sysctl with undocumented knobs that really are debug
only, move them all to /debug/sched/ along with the existing
/debug/sched_* files that already exist.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210412102001.287610138@infradead.org
Use the new cpu_dying() state to simplify and fix the balance_push()
vs CPU hotplug rollback state.
Specifically, we currently rely on notifiers sched_cpu_dying() /
sched_cpu_activate() to terminate balance_push, however if the
cpu_down() fails when we're past sched_cpu_deactivate(), it should
terminate balance_push at that point and not wait until we hit
sched_cpu_activate().
Similarly, when cpu_up() fails and we're going back down, balance_push
should be active, where it currently is not.
So instead, make sure balance_push is enabled below SCHED_AP_ACTIVE
(when !cpu_active()), and gate it's utility with cpu_dying().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/YHgAYef83VQhKdC2@hirez.programming.kicks-ass.net
Pull ARM cpufreq updates for v5.13 from Viresh Kumar:
"- Fix typos in s5pv210 cpufreq driver (Bhaskar Chowdhury).
- Armada 37xx: Fix cpufreq changing base CPU speed to 800 MHz from
1000 MHz (Pali Rohár and Marek Behún).
- cpufreq-dt: Return -EPROBE_DEFER on failure to add table (Quanyang
Wang).
- Minor cleanup in cppc driver (Tom Saeger).
- Add frequency invariance support for CPPC driver and generalize
freq invariance support arch-topology driver (Viresh Kumar)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: armada-37xx: Fix module unloading
cpufreq: armada-37xx: Remove cur_frequency variable
cpufreq: armada-37xx: Fix determining base CPU frequency
cpufreq: armada-37xx: Fix driver cleanup when registration failed
clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0
clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz
cpufreq: armada-37xx: Fix the AVS value for load L1
clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock
cpufreq: armada-37xx: Fix setting TBG parent for load levels
cpufreq: dt: dev_pm_opp_of_cpumask_add_table() may return -EPROBE_DEFER
cpufreq: cppc: simplify default delay_us setting
cpufreq: Rudimentary typos fix in the file s5pv210-cpufreq.c
cpufreq: CPPC: Add support for frequency invariance
arch_topology: Export arch_freq_scale and helpers
arch_topology: Allow multiple entities to provide sched_freq_tick() callback
arch_topology: Rename freq_scale as arch_freq_scale
During load-balance, groups classified as group_misfit_task are filtered
out if they do not pass
group_smaller_max_cpu_capacity(<candidate group>, <local group>);
which itself employs fits_capacity() to compare the sgc->max_capacity of
both groups.
Due to the underlying margin, fits_capacity(X, 1024) will return false for
any X > 819. Tough luck, the capacity_orig's on e.g. the Pixel 4 are
{261, 871, 1024}. If a CPU-bound task ends up on one of those "medium"
CPUs, misfit migration will never intentionally upmigrate it to a CPU of
higher capacity due to the aforementioned margin.
One may argue the 20% margin of fits_capacity() is excessive in the advent
of counter-enhanced load tracking (APERF/MPERF, AMUs), but one point here
is that fits_capacity() is meant to compare a utilization value to a
capacity value, whereas here it is being used to compare two capacity
values. As CPU capacity and task utilization have different dynamics, a
sensible approach here would be to add a new helper dedicated to comparing
CPU capacities.
Also note that comparing capacity extrema of local and source sched_group's
doesn't make much sense when at the day of the day the imbalance will be
pulled by a known env->dst_cpu, whose capacity can be anywhere within the
local group's capacity extrema.
While at it, replace group_smaller_{min, max}_cpu_capacity() with
comparisons of the source group's min/max capacity and the destination
CPU's capacity.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Qais Yousef <qais.yousef@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
Link: https://lkml.kernel.org/r/20210407220628.3798191-4-valentin.schneider@arm.com
When triggering an active load balance, sd->nr_balance_failed is set to
such a value that any further can_migrate_task() using said sd will ignore
the output of task_hot().
This behaviour makes sense, as active load balance intentionally preempts a
rq's running task to migrate it right away, but this asynchronous write is
a bit shoddy, as the stopper thread might run active_load_balance_cpu_stop
before the sd->nr_balance_failed write either becomes visible to the
stopper's CPU or even happens on the CPU that appended the stopper work.
Add a struct lb_env flag to denote active balancing, and use it in
can_migrate_task(). Remove the sd->nr_balance_failed write that served the
same purpose. Cleanup the LBF_DST_PINNED active balance special case.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210407220628.3798191-3-valentin.schneider@arm.com
During load balance, LBF_SOME_PINNED will be set if any candidate task
cannot be detached due to CPU affinity constraints. This can result in
setting env->sd->parent->sgc->group_imbalance, which can lead to a group
being classified as group_imbalanced (rather than any of the other, lower
group_type) when balancing at a higher level.
In workloads involving a single task per CPU, LBF_SOME_PINNED can often be
set due to per-CPU kthreads being the only other runnable tasks on any
given rq. This results in changing the group classification during
load-balance at higher levels when in reality there is nothing that can be
done for this affinity constraint: per-CPU kthreads, as the name implies,
don't get to move around (modulo hotplug shenanigans).
It's not as clear for userspace tasks - a task could be in an N-CPU cpuset
with N-1 offline CPUs, making it an "accidental" per-CPU task rather than
an intended one. KTHREAD_IS_PER_CPU gives us an indisputable signal which
we can leverage here to not set LBF_SOME_PINNED.
Note that the aforementioned classification to group_imbalance (when
nothing can be done) is especially problematic on big.LITTLE systems, which
have a topology the likes of:
DIE [ ]
MC [ ][ ]
0 1 2 3
L L B B
arch_scale_cpu_capacity(L) < arch_scale_cpu_capacity(B)
Here, setting LBF_SOME_PINNED due to a per-CPU kthread when balancing at MC
level on CPUs [0-1] will subsequently prevent CPUs [2-3] from classifying
the [0-1] group as group_misfit_task when balancing at DIE level. Thus, if
CPUs [0-1] are running CPU-bound (misfit) tasks, ill-timed per-CPU kthreads
can significantly delay the upgmigration of said misfit tasks. Systems
relying on ASYM_PACKING are likely to face similar issues.
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
[Use kthread_is_per_cpu() rather than p->nr_cpus_allowed]
[Reword changelog]
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210407220628.3798191-2-valentin.schneider@arm.com
Mel Gorman did some nice work in 9fe1f127b9 ("sched/fair: Merge
select_idle_core/cpu()"), resulting in the kernel being more efficient
at finding an idle CPU, and in tasks spending less time waiting to be
run, both according to the schedstats run_delay numbers, and according
to measured application latencies. Yay.
The flip side of this is that we see more task migrations (about 30%
more), higher cache misses, higher memory bandwidth utilization, and
higher CPU use, for the same number of requests/second.
This is most pronounced on a memcache type workload, which saw a
consistent 1-3% increase in total CPU use on the system, due to those
increased task migrations leading to higher L2 cache miss numbers, and
higher memory utilization. The exclusive L3 cache on Skylake does us
no favors there.
On our web serving workload, that effect is usually negligible.
It appears that the increased number of CPU migrations is generally a
good thing, since it leads to lower cpu_delay numbers, reflecting the
fact that tasks get to run faster. However, the reduced locality and
the corresponding increase in L2 cache misses hurts a little.
The patch below appears to fix the regression, while keeping the
benefit of the lower cpu_delay numbers, by reintroducing
select_idle_smt with a twist: when a socket has no idle cores, check
to see if the sibling of "prev" is idle, before searching all the
other CPUs.
This fixes both the occasional 9% regression on the web serving
workload, and the continuous 2% CPU use regression on the memcache
type workload.
With Mel's patches and this patch together, task migrations are still
high, but L2 cache misses, memory bandwidth, and CPU time used are
back down to what they were before. The p95 and p99 response times for
the memcache type application improve by about 10% over what they were
before Mel's patches got merged.
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210326151932.2c187840@imladris.surriel.com
static_call_update() had stronger type requirements than regular C,
relax them to match. Instead of requiring the @func argument has the
exact matching type, allow any type which C is willing to promote to the
right (function) pointer type. Specifically this allows (void *)
arguments.
This cleans up a bunch of static_call_update() callers for
PREEMPT_DYNAMIC and should get around silly GCC11 warnings for free.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/YFoN7nCl8OfGtpeh@hirez.programming.kicks-ass.net
Currently only root can write files under /proc/pressure. Relax this to
allow tasks running as unprivileged users with CAP_SYS_RESOURCE to be
able to write to these files.
Signed-off-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/20210402025833.27599-1-johunt@akamai.com
mask is built in build_balance_mask() by for_each_cpu(i, sg_span), so
it must be a subset of sched_group_span(sg).
So the cpumask_and() call is redundant - remove it.
[ mingo: Adjusted the changelog a bit. ]
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <Valentin.Schneider@arm.com>
Link: https://lore.kernel.org/r/20210325023140.23456-1-song.bao.hua@hisilicon.com
-1 is -EPERM which is a somewhat odd error to return from
sched_dynamic_write(). No other callers care about which negative
value is used.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210325004515.531631-2-linux@rasmusvillemoes.dk
Use the enum names which are also what is used in the switch() in
sched_dynamic_update().
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210325004515.531631-1-linux@rasmusvillemoes.dk
A long-tail load balance cost is observed on the newly idle path,
this is caused by a race window between the first nr_running check
of the busiest runqueue and its nr_running recheck in detach_tasks.
Before the busiest runqueue is locked, the tasks on the busiest
runqueue could be pulled by other CPUs and nr_running of the busiest
runqueu becomes 1 or even 0 if the running task becomes idle, this
causes detach_tasks breaks with LBF_ALL_PINNED flag set, and triggers
load_balance redo at the same sched_domain level.
In order to find the new busiest sched_group and CPU, load balance will
recompute and update the various load statistics, which eventually leads
to the long-tail load balance cost.
This patch clears LBF_ALL_PINNED flag for this race condition, and hence
reduces the long-tail cost of newly idle balance.
Signed-off-by: Aubrey Li <aubrey.li@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/1614154549-116078-1-git-send-email-aubrey.li@intel.com
update_idle_core() is only done for the case of sched_smt_present.
but test_idle_cores() is done for all machines even those without
SMT.
This can contribute to up 8%+ hackbench performance loss on a
machine like kunpeng 920 which has no SMT. This patch removes the
redundant test_idle_cores() for !SMT machines.
Hackbench is ran with -g {2..14}, for each g it is ran 10 times to get
an average.
$ numactl -N 0 hackbench -p -T -l 20000 -g $1
The below is the result of hackbench w/ and w/o this patch:
g= 2 4 6 8 10 12 14
w/o: 1.8151 3.8499 5.5142 7.2491 9.0340 10.7345 12.0929
w/ : 1.8428 3.7436 5.4501 6.9522 8.2882 9.9535 11.3367
+4.1% +8.3% +7.3% +6.3%
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/20210320221432.924-1-song.bao.hua@hisilicon.com
We noticed that the cost of psi increases with the increase in the
levels of the cgroups. Particularly the cost of cpu_clock() sticks out
as the kernel calls it multiple times as it traverses up the cgroup
tree. This patch reduces the calls to cpu_clock().
Performed perf bench on Intel Broadwell with 3 levels of cgroup.
Before the patch:
$ perf bench sched all
# Running sched/messaging benchmark...
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.747 [sec]
# Running sched/pipe benchmark...
# Executed 1000000 pipe operations between two processes
Total time: 3.516 [sec]
3.516689 usecs/op
284358 ops/sec
After the patch:
$ perf bench sched all
# Running sched/messaging benchmark...
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.640 [sec]
# Running sched/pipe benchmark...
# Executed 1000000 pipe operations between two processes
Total time: 3.329 [sec]
3.329820 usecs/op
300316 ops/sec
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/20210321205156.4186483-1-shakeelb@google.com
The Frequency Invariance Engine (FIE) is providing a frequency scaling
correction factor that helps achieve more accurate load-tracking.
Normally, this scaling factor can be obtained directly with the help of
the cpufreq drivers as they know the exact frequency the hardware is
running at. But that isn't the case for CPPC cpufreq driver.
Another way of obtaining that is using the arch specific counter
support, which is already present in kernel, but that hardware is
optional for platforms.
This patch updates the CPPC driver to register itself with the topology
core to provide its own implementation (cppc_scale_freq_tick()) of
topology_scale_freq_tick() which gets called by the scheduler on every
tick. Note that the arch specific counters have higher priority than
CPPC counters, if available, though the CPPC driver doesn't need to have
any special handling for that.
On an invocation of cppc_scale_freq_tick(), we schedule an irq work
(since we reach here from hard-irq context), which then schedules a
normal work item and cppc_scale_freq_workfn() updates the per_cpu
arch_freq_scale variable based on the counter updates since the last
tick.
To allow platforms to disable this CPPC counter-based frequency
invariance support, this is all done under CONFIG_ACPI_CPPC_CPUFREQ_FIE,
which is enabled by default.
This also exports sched_setattr_nocheck() as the CPPC driver can be
built as a module.
Cc: linux-acpi@vger.kernel.org
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Fix ~42 single-word typos in scheduler code comments.
We have accumulated a few fun ones over the years. :-)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: linux-kernel@vger.kernel.org
Note that sugov_update_next_freq() may return false, that means the
caller sugov_fast_switch() will do nothing except fast switch check.
Similarly, sugov_deferred_update() also has unnecessary operations
of raw_spin_{lock,unlock} in sugov_update_single_freq() for that case.
So, let's call sugov_update_next_freq() before the fast switch check
to avoid unnecessary behaviors above. Accordingly, update interface
definition to sugov_deferred_update() and remove sugov_fast_switch()
since we will call cpufreq_driver_fast_switch() directly instead.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
vtime_account_irq and irqtime_account_irq() base checks on preempt_count()
which fails on RT because preempt_count() does not contain the softirq
accounting which is seperate on RT.
These checks do not need the full preempt count as they only operate on the
hard and softirq sections.
Use irq_count() instead which provides the correct value on both RT and non
RT kernels. The compiler is clever enough to fold the masking for !RT:
99b: 65 8b 05 00 00 00 00 mov %gs:0x0(%rip),%eax
- 9a2: 25 ff ff ff 7f and $0x7fffffff,%eax
+ 9a2: 25 00 ff ff 00 and $0xffff00,%eax
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210309085727.153926793@linutronix.de
Since 565790d28b (sched: Fix balance_callback(), 2020-05-11), there
is no longer a need to reuse the result value of the call to finish_task_switch()
inside schedule_tail(), therefore the variable used to hold that value
(rq) is no longer needed.
Signed-off-by: Edmundo Carmona Antoranz <eantoranz@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210306210739.1370486-1-eantoranz@gmail.com
A significant portion of __calc_delta() time is spent in the loop
shifting a u64 by 32 bits. Use `fls` instead of iterating.
This is ~7x faster on benchmarks.
The generic `fls` implementation (`generic_fls`) is still ~4x faster
than the loop.
Architectures that have a better implementation will make use of it. For
example, on x86 we get an additional factor 2 in speed without dedicated
implementation.
On GCC, the asm versions of `fls` are about the same speed as the
builtin. On Clang, the versions that use fls are more than twice as
slow as the builtin. This is because the way the `fls` function is
written, clang puts the value in memory:
https://godbolt.org/z/EfMbYe. This bug is filed at
https://bugs.llvm.org/show_bug.cgi?idI406.
```
name cpu/op
BM_Calc<__calc_delta_loop> 9.57ms Â=B112%
BM_Calc<__calc_delta_generic_fls> 2.36ms Â=B113%
BM_Calc<__calc_delta_asm_fls> 2.45ms Â=B113%
BM_Calc<__calc_delta_asm_fls_nomem> 1.66ms Â=B112%
BM_Calc<__calc_delta_asm_fls64> 2.46ms Â=B113%
BM_Calc<__calc_delta_asm_fls64_nomem> 1.34ms Â=B115%
BM_Calc<__calc_delta_builtin> 1.32ms Â=B111%
```
Signed-off-by: Clement Courbet <courbet@google.com>
Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210303224653.2579656-1-joshdon@google.com
The commit 36b238d571 ("psi: Optimize switching tasks inside shared
cgroups") only update cgroups whose state actually changes during a
task switch only in task preempt case, not in task sleep case.
We actually don't need to clear and set TSK_ONCPU state for common cgroups
of next and prev task in sleep case, that can save many psi_group_change
especially when most activity comes from one leaf cgroup.
sleep before:
psi_dequeue()
while ((group = iterate_groups(prev))) # all ancestors
psi_group_change(prev, .clear=TSK_RUNNING|TSK_ONCPU)
psi_task_switch()
while ((group = iterate_groups(next))) # all ancestors
psi_group_change(next, .set=TSK_ONCPU)
sleep after:
psi_dequeue()
nop
psi_task_switch()
while ((group = iterate_groups(next))) # until (prev & next)
psi_group_change(next, .set=TSK_ONCPU)
while ((group = iterate_groups(prev))) # all ancestors
psi_group_change(prev, .clear=common?TSK_RUNNING:TSK_RUNNING|TSK_ONCPU)
When a voluntary sleep switches to another task, we remove one call of
psi_group_change() for every common cgroup ancestor of the two tasks.
Co-developed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/20210303034659.91735-5-zhouchengming@bytedance.com
Move the unlikely branches out of line. This eliminates undesirable
jumps during wakeup and sleeps for workloads that aren't under any
sort of resource pressure.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210303034659.91735-4-zhouchengming@bytedance.com
Move the reclaim detection from the timer tick to the task state
tracking machinery using the recently added ONCPU state. And we
also add task psi_flags changes checking in the psi_task_switch()
optimization to update the parents properly.
In terms of performance and cost, this ONCPU task state tracking
is not cheaper than previous timer tick in aggregate. But the code is
simpler and shorter this way, so it's a maintainability win. And
Johannes did some testing with perf bench, the performace and cost
changes would be acceptable for real workloads.
Thanks to Johannes Weiner for pointing out the psi_task_switch()
optimization things and the clearer changelog.
Co-developed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/20210303034659.91735-3-zhouchengming@bytedance.com
The FULL state doesn't exist for the CPU resource at the system level,
but exist at the cgroup level, means all non-idle tasks in a cgroup are
delayed on the CPU resource which used by others outside of the cgroup
or throttled by the cgroup cpu.max configuration.
Co-developed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/20210303034659.91735-2-zhouchengming@bytedance.com
Being called for each dequeue, util_est reduces the number of its updates
by filtering out when the EWMA signal is different from the task util_avg
by less than 1%. It is a problem for a sudden util_avg ramp-up. Due to the
decay from a previous high util_avg, EWMA might now be close enough to
the new util_avg. No update would then happen while it would leave
ue.enqueued with an out-of-date value.
Taking into consideration the two util_est members, EWMA and enqueued for
the filtering, ensures, for both, an up-to-date value.
This is for now an issue only for the trace probe that might return the
stale value. Functional-wise, it isn't a problem, as the value is always
accessed through max(enqueued, ewma).
This problem has been observed using LISA's UtilConvergence:test_means on
the sd845c board.
No regression observed with Hackbench on sd845c and Perf-bench sched pipe
on hikey/hikey960.
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210225165820.1377125-1-vincent.donnefort@arm.com
Syzbot reported a handful of occurrences where an sd->nr_balance_failed can
grow to much higher values than one would expect.
A successful load_balance() resets it to 0; a failed one increments
it. Once it gets to sd->cache_nice_tries + 3, this *should* trigger an
active balance, which will either set it to sd->cache_nice_tries+1 or reset
it to 0. However, in case the to-be-active-balanced task is not allowed to
run on env->dst_cpu, then the increment is done without any further
modification.
This could then be repeated ad nauseam, and would explain the absurdly high
values reported by syzbot (86, 149). VincentG noted there is value in
letting sd->cache_nice_tries grow, so the shift itself should be
fixed. That means preventing:
"""
If the value of the right operand is negative or is greater than or equal
to the width of the promoted left operand, the behavior is undefined.
"""
Thus we need to cap the shift exponent to
BITS_PER_TYPE(typeof(lefthand)) - 1.
I had a look around for other similar cases via coccinelle:
@expr@
position pos;
expression E1;
expression E2;
@@
(
E1 >> E2@pos
|
E1 >> E2@pos
)
@cst depends on expr@
position pos;
expression expr.E1;
constant cst;
@@
(
E1 >> cst@pos
|
E1 << cst@pos
)
@script:python depends on !cst@
pos << expr.pos;
exp << expr.E2;
@@
# Dirty hack to ignore constexpr
if exp.upper() != exp:
coccilib.report.print_report(pos[0], "Possible UB shift here")
The only other match in kernel/sched is rq_clock_thermal() which employs
sched_thermal_decay_shift, and that exponent is already capped to 10, so
that one is fine.
Fixes: 5a7f555904 ("sched/fair: Relax constraint on task's load during load balance")
Reported-by: syzbot+d7581744d5fd27c9fbe1@syzkaller.appspotmail.com
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: http://lore.kernel.org/r/000000000000ffac1205b9a2112f@google.com
The sub_positive local version is saving an explicit load-store and is
enough for the cpu_util_next() usage.
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Quentin Perret <qperret@google.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lkml.kernel.org/r/20210225083612.1113823-3-vincent.donnefort@arm.com
find_energy_efficient_cpu() (feec()) computes for each perf_domain (pd) an
energy delta as follows:
feec(task)
for_each_pd
base_energy = compute_energy(task, -1, pd)
-> for_each_cpu(pd)
-> cpu_util_next(cpu, task, -1)
energy_delta = compute_energy(task, dst_cpu, pd)
-> for_each_cpu(pd)
-> cpu_util_next(cpu, task, dst_cpu)
energy_delta -= base_energy
Then it picks the best CPU as being the one that minimizes energy_delta.
cpu_util_next() estimates the CPU utilization that would happen if the
task was placed on dst_cpu as follows:
max(cpu_util + task_util, cpu_util_est + _task_util_est)
The task contribution to the energy delta can then be either:
(1) _task_util_est, on a mostly idle CPU, where cpu_util is close to 0
and _task_util_est > cpu_util.
(2) task_util, on a mostly busy CPU, where cpu_util > _task_util_est.
(cpu_util_est doesn't appear here. It is 0 when a CPU is idle and
otherwise must be small enough so that feec() takes the CPU as a
potential target for the task placement)
This is problematic for feec(), as cpu_util_next() might give an unfair
advantage to a CPU which is mostly busy (2) compared to one which is
mostly idle (1). _task_util_est being always bigger than task_util in
feec() (as the task is waking up), the task contribution to the energy
might look smaller on certain CPUs (2) and this breaks the energy
comparison.
This issue is, moreover, not sporadic. By starving idle CPUs, it keeps
their cpu_util < _task_util_est (1) while others will maintain cpu_util >
_task_util_est (2).
Fix this problem by always using max(task_util, _task_util_est) as a task
contribution to the energy (ENERGY_UTIL). The new estimated CPU
utilization for the energy would then be:
max(cpu_util, cpu_util_est) + max(task_util, _task_util_est)
compute_energy() still needs to know which OPP would be selected if the
task would be migrated in the perf_domain (FREQUENCY_UTIL). Hence,
cpu_util_next() is still used to estimate the maximum util within the pd.
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Quentin Perret <qperret@google.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lkml.kernel.org/r/20210225083612.1113823-2-vincent.donnefort@arm.com
Start to update last_blocked_load_update_tick to reduce the possibility
of another cpu starting the update one more time
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210224133007.28644-8-vincent.guittot@linaro.org
Instead of waking up a random and already idle CPU, we can take advantage
of this_cpu being about to enter idle to run the ILB and update the
blocked load.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210224133007.28644-7-vincent.guittot@linaro.org
The function sync_runqueues_membarrier_state() should copy the
membarrier state from the @mm received as parameter to each runqueue
currently running tasks using that mm.
However, the use of smp_call_function_many() skips the current runqueue,
which is unintended. Replace by a call to on_each_cpu_mask().
Fixes: 227a4aadc7 ("sched/membarrier: Fix p->mm->membarrier_state racy load")
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org # 5.4.x+
Link: https://lore.kernel.org/r/74F1E842-4A84-47BF-B6C2-5407DFDD4A4A@gmail.com
Reorder the tests and skip useless ones when no load balance has been
performed and rq lock has not been released.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210224133007.28644-6-vincent.guittot@linaro.org
Now that we have set_affinity_pending::stop_pending to indicate if a
stopper is in progress, and we have the guarantee that if that stopper
exists, it will (eventually) complete our @pending we can simplify the
refcount scheme by no longer counting the stopper thread.
Fixes: 6d337eab04 ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()")
Cc: stable@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210224131355.724130207@infradead.org
Remove the specific case for handling this_cpu outside for_each_cpu() loop
when running ILB. Instead we use for_each_cpu_wrap() and start with the
next cpu after this_cpu so we will continue to finish with this_cpu.
update_nohz_stats() is now used for this_cpu too and will prevents
unnecessary update. We don't need a special case for handling the update of
nohz.next_balance for this_cpu anymore because it is now handled by the
loop like others.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210224133007.28644-5-vincent.guittot@linaro.org
Consider:
sched_setaffinity(p, X); sched_setaffinity(p, Y);
Then the first will install p->migration_pending = &my_pending; and
issue stop_one_cpu_nowait(pending); and the second one will read
p->migration_pending and _also_ issue: stop_one_cpu_nowait(pending),
the _SAME_ @pending.
This causes stopper list corruption.
Add set_affinity_pending::stop_pending, to indicate if a stopper is in
progress.
Fixes: 6d337eab04 ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()")
Cc: stable@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210224131355.649146419@infradead.org
idle load balance is the only user of update_nohz_stats and doesn't use
force parameter. Remove it
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210224133007.28644-4-vincent.guittot@linaro.org
When the purpose of migration_cpu_stop() is to migrate the task to
'any' valid CPU, don't migrate the task when it's already running on a
valid CPU.
Fixes: 6d337eab04 ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()")
Cc: stable@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210224131355.569238629@infradead.org
The return of _nohz_idle_balance() is not used anymore so we can remove
it
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210224133007.28644-3-vincent.guittot@linaro.org
The SCA_MIGRATE_ENABLE and task_running() cases are almost identical,
collapse them to avoid further duplication.
Fixes: 6d337eab04 ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()")
Cc: stable@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210224131355.500108964@infradead.org
newidle_balance runs with both preempt and irq disabled which prevent
local irq to run during this period. The duration for updating the
blocked load of CPUs varies according to the number of CPU cgroups
with non-decayed load and extends this critical period to an uncontrolled
level.
Remove the update from newidle_balance and trigger a normal ILB that
will take care of the update instead.
This reduces the IRQ latency from O(nr_cgroups * nr_nohz_cpus) to
O(nr_cgroups).
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210224133007.28644-2-vincent.guittot@linaro.org
Since, when ->stop_pending, only the stopper can uninstall
p->migration_pending. This could simplify a few ifs, because:
(pending != NULL) => (pending == p->migration_pending)
Also, the fatty comment above affine_move_task() probably needs a bit
of gardening.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When affine_move_task() issues a migration_cpu_stop(), the purpose of
that function is to complete that @pending, not any random other
p->migration_pending that might have gotten installed since.
This realization much simplifies migration_cpu_stop() and allows
further necessary steps to fix all this as it provides the guarantee
that @pending's stopper will complete @pending (and not some random
other @pending).
Fixes: 6d337eab04 ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()")
Cc: stable@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210224131355.430014682@infradead.org
When affine_move_task(p) is called on a running task @p, which is not
otherwise already changing affinity, we'll first set
p->migration_pending and then do:
stop_one_cpu(cpu_of_rq(rq), migration_cpu_stop, &arg);
This then gets us to migration_cpu_stop() running on the CPU that was
previously running our victim task @p.
If we find that our task is no longer on that runqueue (this can
happen because of a concurrent migration due to load-balance etc.),
then we'll end up at the:
} else if (dest_cpu < 1 || pending) {
branch. Which we'll take because we set pending earlier. Here we first
check if the task @p has already satisfied the affinity constraints,
if so we bail early [A]. Otherwise we'll reissue migration_cpu_stop()
onto the CPU that is now hosting our task @p:
stop_one_cpu_nowait(cpu_of(rq), migration_cpu_stop,
&pending->arg, &pending->stop_work);
Except, we've never initialized pending->arg, which will be all 0s.
This then results in running migration_cpu_stop() on the next CPU with
arg->p == NULL, which gives the by now obvious result of fireworks.
The cure is to change affine_move_task() to always use pending->arg,
furthermore we can use the exact same pattern as the
SCA_MIGRATE_ENABLE case, since we'll block on the pending->done
completion anyway, no point in adding yet another completion in
stop_one_cpu().
This then gives a clear distinction between the two
migration_cpu_stop() use cases:
- sched_exec() / migrate_task_to() : arg->pending == NULL
- affine_move_task() : arg->pending != NULL;
And we can have it ignore p->migration_pending when !arg->pending. Any
stop work from sched_exec() / migrate_task_to() is in addition to stop
works from affine_move_task(), which will be sufficient to issue the
completion.
Fixes: 6d337eab04 ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()")
Cc: stable@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210224131355.357743989@infradead.org
Drop repeated words in kernel/events/.
{if, the, that, with, time}
Drop repeated words in kernel/locking/.
{it, no, the}
Drop repeated words in kernel/sched/.
{in, not}
Link: https://lkml.kernel.org/r/20210127023412.26292-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Will Deacon <will@kernel.org> [kernel/locking/]
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Address cpufreq regression introduced in 5.11 that causes
CPU frequency reporting to be distorted on systems with CPPC
that use acpi-cpufreq as the scaling driver (Rafael Wysocki).
- Fix regression introduced during the 5.10 development cycle
related to CPU hotplug and policy recreation in the
qcom-cpufreq-hw driver (Shawn Guo).
- Fix recent regression in the operating performance points (OPP)
framework that may cause frequency updates to be skipped by
mistake in some cases (Jonathan Marek).
- Simplify schedutil governor code and remove a misleading comment
from it (Yue Hu).
- Fix kerneldoc comment typo in the cpufreq core (Yue Hu).
-----BEGIN PGP SIGNATURE-----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=PT0e
-----END PGP SIGNATURE-----
Merge tag 'pm-5.12-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are fixes and cleanups on top of the power management material
for 5.12-rc1 merged previously.
Specifics:
- Address cpufreq regression introduced in 5.11 that causes CPU
frequency reporting to be distorted on systems with CPPC that use
acpi-cpufreq as the scaling driver (Rafael Wysocki).
- Fix regression introduced during the 5.10 development cycle related
to CPU hotplug and policy recreation in the qcom-cpufreq-hw driver
(Shawn Guo).
- Fix recent regression in the operating performance points (OPP)
framework that may cause frequency updates to be skipped by mistake
in some cases (Jonathan Marek).
- Simplify schedutil governor code and remove a misleading comment
from it (Yue Hu).
- Fix kerneldoc comment typo in the cpufreq core (Yue Hu)"
* tag 'pm-5.12-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Fix typo in kerneldoc comment
cpufreq: schedutil: Remove update_lock comment from struct sugov_policy definition
cpufreq: schedutil: Remove needless sg_policy parameter from ignore_dl_rate_limit()
cpufreq: ACPI: Set cpuinfo.max_freq directly if max boost is known
cpufreq: qcom-hw: drop devm_xxx() calls from init/exit hooks
opp: Don't skip freq update for different frequency
- Support for userspace to emulate Xen hypercalls
- Raise the maximum number of user memslots
- Scalability improvements for the new MMU. Instead of the complex
"fast page fault" logic that is used in mmu.c, tdp_mmu.c uses an
rwlock so that page faults are concurrent, but the code that can run
against page faults is limited. Right now only page faults take the
lock for reading; in the future this will be extended to some
cases of page table destruction. I hope to switch the default MMU
around 5.12-rc3 (some testing was delayed due to Chinese New Year).
- Cleanups for MAXPHYADDR checks
- Use static calls for vendor-specific callbacks
- On AMD, use VMLOAD/VMSAVE to save and restore host state
- Stop using deprecated jump label APIs
- Workaround for AMD erratum that made nested virtualization unreliable
- Support for LBR emulation in the guest
- Support for communicating bus lock vmexits to userspace
- Add support for SEV attestation command
- Miscellaneous cleanups
PPC:
- Support for second data watchpoint on POWER10
- Remove some complex workarounds for buggy early versions of POWER9
- Guest entry/exit fixes
ARM64
- Make the nVHE EL2 object relocatable
- Cleanups for concurrent translation faults hitting the same page
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Simplification of the early init hypercall handling
Non-KVM changes (with acks):
- Detection of contended rwlocks (implemented only for qrwlocks,
because KVM only needs it for x86)
- Allow __DISABLE_EXPORTS from assembly code
- Provide a saner follow_pfn replacements for modules
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmApSRgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOc7wf9FnlinKoTFaSk7oeuuhF/CoCVwSFs
Z9+A2sNI99tWHQxFR6dyDkEFeQoXnqSxfLHtUVIdH/JnTg0FkEvFz3NK+0PzY1PF
PnGNbSoyhP58mSBG4gbBAxdF3ZJZMB8GBgYPeR62PvMX2dYbcHqVBNhlf6W4MQK4
5mAUuAnbf19O5N267sND+sIg3wwJYwOZpRZB7PlwvfKAGKf18gdBz5dQ/6Ej+apf
P7GODZITjqM5Iho7SDm/sYJlZprFZT81KqffwJQHWFMEcxFgwzrnYPx7J3gFwRTR
eeh9E61eCBDyCTPpHROLuNTVBqrAioCqXLdKOtO5gKvZI3zmomvAsZ8uXQ==
=uFZU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"x86:
- Support for userspace to emulate Xen hypercalls
- Raise the maximum number of user memslots
- Scalability improvements for the new MMU.
Instead of the complex "fast page fault" logic that is used in
mmu.c, tdp_mmu.c uses an rwlock so that page faults are concurrent,
but the code that can run against page faults is limited. Right now
only page faults take the lock for reading; in the future this will
be extended to some cases of page table destruction. I hope to
switch the default MMU around 5.12-rc3 (some testing was delayed
due to Chinese New Year).
- Cleanups for MAXPHYADDR checks
- Use static calls for vendor-specific callbacks
- On AMD, use VMLOAD/VMSAVE to save and restore host state
- Stop using deprecated jump label APIs
- Workaround for AMD erratum that made nested virtualization
unreliable
- Support for LBR emulation in the guest
- Support for communicating bus lock vmexits to userspace
- Add support for SEV attestation command
- Miscellaneous cleanups
PPC:
- Support for second data watchpoint on POWER10
- Remove some complex workarounds for buggy early versions of POWER9
- Guest entry/exit fixes
ARM64:
- Make the nVHE EL2 object relocatable
- Cleanups for concurrent translation faults hitting the same page
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Simplification of the early init hypercall handling
Non-KVM changes (with acks):
- Detection of contended rwlocks (implemented only for qrwlocks,
because KVM only needs it for x86)
- Allow __DISABLE_EXPORTS from assembly code
- Provide a saner follow_pfn replacements for modules"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (192 commits)
KVM: x86/xen: Explicitly pad struct compat_vcpu_info to 64 bytes
KVM: selftests: Don't bother mapping GVA for Xen shinfo test
KVM: selftests: Fix hex vs. decimal snafu in Xen test
KVM: selftests: Fix size of memslots created by Xen tests
KVM: selftests: Ignore recently added Xen tests' build output
KVM: selftests: Add missing header file needed by xAPIC IPI tests
KVM: selftests: Add operand to vmsave/vmload/vmrun in svm.c
KVM: SVM: Make symbol 'svm_gp_erratum_intercept' static
locking/arch: Move qrwlock.h include after qspinlock.h
KVM: PPC: Book3S HV: Fix host radix SLB optimisation with hash guests
KVM: PPC: Book3S HV: Ensure radix guest has no SLB entries
KVM: PPC: Don't always report hash MMU capability for P9 < DD2.2
KVM: PPC: Book3S HV: Save and restore FSCR in the P9 path
KVM: PPC: remove unneeded semicolon
KVM: PPC: Book3S HV: Use POWER9 SLBIA IH=6 variant to clear SLB
KVM: PPC: Book3S HV: No need to clear radix host SLB before loading HPT guest
KVM: PPC: Book3S HV: Fix radix guest SLB side channel
KVM: PPC: Book3S HV: Remove support for running HPT guest on RPT host without mixed mode support
KVM: PPC: Book3S HV: Introduce new capability for 2nd DAWR
KVM: PPC: Book3S HV: Add infrastructure to support 2nd DAWR
...
[ NOTE: unfortunately this tree had to be freshly rebased today,
it's a same-content tree of 82891be90f3c (-next published)
merged with v5.11.
The main reason for the rebase was an authorship misattribution
problem with a new commit, which we noticed in the last minute,
and which we didn't want to be merged upstream. The offending
commit was deep in the tree, and dependent commits had to be
rebased as well. ]
- Core scheduler updates:
- Add CONFIG_PREEMPT_DYNAMIC: this in its current form adds the
preempt=none/voluntary/full boot options (default: full),
to allow distros to build a PREEMPT kernel but fall back to
close to PREEMPT_VOLUNTARY (or PREEMPT_NONE) runtime scheduling
behavior via a boot time selection.
There's also the /debug/sched_debug switch to do this runtime.
This feature is implemented via runtime patching (a new variant of static calls).
The scope of the runtime patching can be best reviewed by looking
at the sched_dynamic_update() function in kernel/sched/core.c.
( Note that the dynamic none/voluntary mode isn't 100% identical,
for example preempt-RCU is available in all cases, plus the
preempt count is maintained in all models, which has runtime
overhead even with the code patching. )
The PREEMPT_VOLUNTARY/PREEMPT_NONE models, used by the vast majority
of distributions, are supposed to be unaffected.
- Fix ignored rescheduling after rcu_eqs_enter(). This is a bug that
was found via rcutorture triggering a hang. The bug is that
rcu_idle_enter() may wake up a NOCB kthread, but this happens after
the last generic need_resched() check. Some cpuidle drivers fix it
by chance but many others don't.
In true 2020 fashion the original bug fix has grown into a 5-patch
scheduler/RCU fix series plus another 16 RCU patches to address
the underlying issue of missed preemption events. These are the
initial fixes that should fix current incarnations of the bug.
- Clean up rbtree usage in the scheduler, by providing & using the following
consistent set of rbtree APIs:
partial-order; less() based:
- rb_add(): add a new entry to the rbtree
- rb_add_cached(): like rb_add(), but for a rb_root_cached
total-order; cmp() based:
- rb_find(): find an entry in an rbtree
- rb_find_add(): find an entry, and add if not found
- rb_find_first(): find the first (leftmost) matching entry
- rb_next_match(): continue from rb_find_first()
- rb_for_each(): iterate a sub-tree using the previous two
- Improve the SMP/NUMA load-balancer: scan for an idle sibling in a single pass.
This is a 4-commit series where each commit improves one aspect of the idle
sibling scan logic.
- Improve the cpufreq cooling driver by getting the effective CPU utilization
metrics from the scheduler
- Improve the fair scheduler's active load-balancing logic by reducing the number
of active LB attempts & lengthen the load-balancing interval. This improves
stress-ng mmapfork performance.
- Fix CFS's estimated utilization (util_est) calculation bug that can result in
too high utilization values
- Misc updates & fixes:
- Fix the HRTICK reprogramming & optimization feature
- Fix SCHED_SOFTIRQ raising race & warning in the CPU offlining code
- Reduce dl_add_task_root_domain() overhead
- Fix uprobes refcount bug
- Process pending softirqs in flush_smp_call_function_from_idle()
- Clean up task priority related defines, remove *USER_*PRIO and
USER_PRIO()
- Simplify the sched_init_numa() deduplication sort
- Documentation updates
- Fix EAS bug in update_misfit_status(), which degraded the quality
of energy-balancing
- Smaller cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmAtHBsRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1itgg/+NGed12pgPjYBzesdou60Lvx7LZLGjfOt
M1F1EnmQGn/hEH2fCY6ZoqIZQTVltm7GIcBNabzYTzlaHZsdtyuDUJBZyj19vTlk
zekcj7WVt+qvfjChaNwEJhQ9nnOM/eohMgEOHMAAJd9zlnQvve7NOLQ56UDM+kn/
9taFJ5ZPvb4avP6C5p3KivvKex6Bjof/Tl0m3utpNyPpI/qK3FyGxwdgCxU0yepT
ABWQX5ZQCufFvo1bgnBPfqyzab4MqhoM3bNKBsLQfuAlssG1xRv4KQOev4dRwrt9
pXJikV5C9yez5d2lGe5p0ltH5IZS/l9x2yI/ZQj3OUDTFyV1ic6WfFAqJgDzVF8E
i/vvA4NPQiI241Bkps+ErcCw4aVOgiY6TWli74cHjLUIX0+As6aHrFWXGSxUmiHB
WR+B8KmdfzRTTlhOxMA+cvlpZcKCfxWkJJmXzr/lDZzIuKPqM3QCE2wD9sixkfVo
JNICT0IvZghWOdbMEfZba8Psh/e2LVI9RzdpEiuYJz1ZrVlt1hO0M6jBxY0hMz9n
k54z81xODw0a8P2FHMtpmB1vhAeqCmvwA6DO8z0Oxs0DFi+KM2bLf2efHsCKafI+
Bm5v9YFaOk/55R76hJVh+aYLlyFgFkKd+P/niJTPDnxOk3SqJuXvTrql1HeGHkNr
kYgQa23dsZk=
=pyaG
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core scheduler updates:
- Add CONFIG_PREEMPT_DYNAMIC: this in its current form adds the
preempt=none/voluntary/full boot options (default: full), to allow
distros to build a PREEMPT kernel but fall back to close to
PREEMPT_VOLUNTARY (or PREEMPT_NONE) runtime scheduling behavior via
a boot time selection.
There's also the /debug/sched_debug switch to do this runtime.
This feature is implemented via runtime patching (a new variant of
static calls).
The scope of the runtime patching can be best reviewed by looking
at the sched_dynamic_update() function in kernel/sched/core.c.
( Note that the dynamic none/voluntary mode isn't 100% identical,
for example preempt-RCU is available in all cases, plus the
preempt count is maintained in all models, which has runtime
overhead even with the code patching. )
The PREEMPT_VOLUNTARY/PREEMPT_NONE models, used by the vast
majority of distributions, are supposed to be unaffected.
- Fix ignored rescheduling after rcu_eqs_enter(). This is a bug that
was found via rcutorture triggering a hang. The bug is that
rcu_idle_enter() may wake up a NOCB kthread, but this happens after
the last generic need_resched() check. Some cpuidle drivers fix it
by chance but many others don't.
In true 2020 fashion the original bug fix has grown into a 5-patch
scheduler/RCU fix series plus another 16 RCU patches to address the
underlying issue of missed preemption events. These are the initial
fixes that should fix current incarnations of the bug.
- Clean up rbtree usage in the scheduler, by providing & using the
following consistent set of rbtree APIs:
partial-order; less() based:
- rb_add(): add a new entry to the rbtree
- rb_add_cached(): like rb_add(), but for a rb_root_cached
total-order; cmp() based:
- rb_find(): find an entry in an rbtree
- rb_find_add(): find an entry, and add if not found
- rb_find_first(): find the first (leftmost) matching entry
- rb_next_match(): continue from rb_find_first()
- rb_for_each(): iterate a sub-tree using the previous two
- Improve the SMP/NUMA load-balancer: scan for an idle sibling in a
single pass. This is a 4-commit series where each commit improves
one aspect of the idle sibling scan logic.
- Improve the cpufreq cooling driver by getting the effective CPU
utilization metrics from the scheduler
- Improve the fair scheduler's active load-balancing logic by
reducing the number of active LB attempts & lengthen the
load-balancing interval. This improves stress-ng mmapfork
performance.
- Fix CFS's estimated utilization (util_est) calculation bug that can
result in too high utilization values
Misc updates & fixes:
- Fix the HRTICK reprogramming & optimization feature
- Fix SCHED_SOFTIRQ raising race & warning in the CPU offlining code
- Reduce dl_add_task_root_domain() overhead
- Fix uprobes refcount bug
- Process pending softirqs in flush_smp_call_function_from_idle()
- Clean up task priority related defines, remove *USER_*PRIO and
USER_PRIO()
- Simplify the sched_init_numa() deduplication sort
- Documentation updates
- Fix EAS bug in update_misfit_status(), which degraded the quality
of energy-balancing
- Smaller cleanups"
* tag 'sched-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
sched,x86: Allow !PREEMPT_DYNAMIC
entry/kvm: Explicitly flush pending rcuog wakeup before last rescheduling point
entry: Explicitly flush pending rcuog wakeup before last rescheduling point
rcu/nocb: Trigger self-IPI on late deferred wake up before user resume
rcu/nocb: Perform deferred wake up before last idle's need_resched() check
rcu: Pull deferred rcuog wake up to rcu_eqs_enter() callers
sched/features: Distinguish between NORMAL and DEADLINE hrtick
sched/features: Fix hrtick reprogramming
sched/deadline: Reduce rq lock contention in dl_add_task_root_domain()
uprobes: (Re)add missing get_uprobe() in __find_uprobe()
smp: Process pending softirqs in flush_smp_call_function_from_idle()
sched: Harden PREEMPT_DYNAMIC
static_call: Allow module use without exposing static_call_key
sched: Add /debug/sched_preempt
preempt/dynamic: Support dynamic preempt with preempt= boot option
preempt/dynamic: Provide irqentry_exit_cond_resched() static call
preempt/dynamic: Provide preempt_schedule[_notrace]() static calls
preempt/dynamic: Provide cond_resched() and might_resched() static calls
preempt: Introduce CONFIG_PREEMPT_DYNAMIC
static_call: Provide DEFINE_STATIC_CALL_RET0()
...
Currently, update_lock is also used in sugov_update_single_freq().
The comment is not helpful anymore.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since sg_policy is a member of struct sugov_cpu.
Also remove the local variable in sugov_update_single_common() to
make the code more clean.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Minor subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Entering RCU idle mode may cause a deferred wake up of an RCU NOCB_GP
kthread (rcuog) to be serviced.
Usually a local wake up happening while running the idle task is handled
in one of the need_resched() checks carefully placed within the idle
loop that can break to the scheduler.
Unfortunately the call to rcu_idle_enter() is already beyond the last
generic need_resched() check and we may halt the CPU with a resched
request unhandled, leaving the task hanging.
Fix this with splitting the rcuog wakeup handling from rcu_idle_enter()
and place it before the last generic need_resched() check in the idle
loop. It is then assumed that no call to call_rcu() will be performed
after that in the idle loop until the CPU is put in low power mode.
Fixes: 96d3fd0d31 (rcu: Break call_rcu() deadlock involving scheduler and perf)
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210131230548.32970-3-frederic@kernel.org
The HRTICK feature has traditionally been servicing configurations that
need precise preemptions point for NORMAL tasks. More recently, the
feature has been extended to also service DEADLINE tasks with stringent
runtime enforcement needs (e.g., runtime < 1ms with HZ=1000).
Enabling HRTICK sched feature currently enables the additional timer and
task tick for both classes, which might introduced undesired overhead
for no additional benefit if one needed it only for one of the cases.
Separate HRTICK sched feature in two (and leave the traditional case
name unmodified) so that it can be selectively enabled when needed.
With:
$ echo HRTICK > /sys/kernel/debug/sched_features
the NORMAL/fair hrtick gets enabled.
With:
$ echo HRTICK_DL > /sys/kernel/debug/sched_features
the DEADLINE hrtick gets enabled.
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210208073554.14629-3-juri.lelli@redhat.com
Hung tasks and RCU stall cases were reported on systems which were not
100% busy. Investigation of such unexpected cases (no sign of potential
starvation caused by tasks hogging the system) pointed out that the
periodic sched tick timer wasn't serviced anymore after a certain point
and that caused all machinery that depends on it (timers, RCU, etc.) to
stop working as well. This issues was however only reproducible if
HRTICK was enabled.
Looking at core dumps it was found that the rbtree of the hrtimer base
used also for the hrtick was corrupted (i.e. next as seen from the base
root and actual leftmost obtained by traversing the tree are different).
Same base is also used for periodic tick hrtimer, which might get "lost"
if the rbtree gets corrupted.
Much alike what described in commit 1f71addd34 ("tick/sched: Do not
mess with an enqueued hrtimer") there is a race window between
hrtimer_set_expires() in hrtick_start and hrtimer_start_expires() in
__hrtick_restart() in which the former might be operating on an already
queued hrtick hrtimer, which might lead to corruption of the base.
Use hrtick_start() (which removes the timer before enqueuing it back) to
ensure hrtick hrtimer reprogramming is entirely guarded by the base
lock, so that no race conditions can occur.
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210208073554.14629-2-juri.lelli@redhat.com
dl_add_task_root_domain() is called during sched domain rebuild:
rebuild_sched_domains_locked()
partition_and_rebuild_sched_domains()
rebuild_root_domains()
for all top_cpuset descendants:
update_tasks_root_domain()
for all tasks of cpuset:
dl_add_task_root_domain()
Change it so that only the task pi lock is taken to check if the task
has a SCHED_DEADLINE (DL) policy. In case that p is a DL task take the
rq lock as well to be able to safely de-reference root domain's DL
bandwidth structure.
Most of the tasks will have another policy (namely SCHED_NORMAL) and
can now bail without taking the rq lock.
One thing to note here: Even in case that there aren't any DL user
tasks, a slow frequency switching system with cpufreq gov schedutil has
a DL task (sugov) per frequency domain running which participates in DL
bandwidth management.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Quentin Perret <qperret@google.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lkml.kernel.org/r/20210119083542.19856-1-dietmar.eggemann@arm.com
Use the new EXPORT_STATIC_CALL_TRAMP() / static_call_mod() to unexport
the static_call_key for the PREEMPT_DYNAMIC calls such that modules
can no longer update these calls.
Having modules change/hi-jack the preemption calls would be horrible.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Provide static calls to control preempt_schedule[_notrace]()
(called in CONFIG_PREEMPT) so that we can override their behaviour when
preempt= is overriden.
Since the default behaviour is full preemption, both their calls are
initialized to the arch provided wrapper, if any.
[fweisbec: only define static calls when PREEMPT_DYNAMIC, make it less
dependent on x86 with __preempt_schedule_func]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210118141223.123667-7-frederic@kernel.org
Provide static calls to control cond_resched() (called in !CONFIG_PREEMPT)
and might_resched() (called in CONFIG_PREEMPT_VOLUNTARY) to that we
can override their behaviour when preempt= is overriden.
Since the default behaviour is full preemption, both their calls are
ignored when preempt= isn't passed.
[fweisbec: branch might_resched() directly to __cond_resched(), only
define static calls when PREEMPT_DYNAMIC]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210118141223.123667-6-frederic@kernel.org
The description of the RT offset and the values for 'normal' tasks needs
update. Moreover there are DL tasks now.
task_prio() has to stay like it is to guarantee compatibility with the
/proc/<pid>/stat priority field:
# cat /proc/<pid>/stat | awk '{ print $18; }'
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210128131040.296856-4-dietmar.eggemann@arm.com
The only remaining use of MAX_USER_PRIO (and USER_PRIO) is the
SCALE_PRIO() definition in the PowerPC Cell architecture's Synergistic
Processor Unit (SPU) scheduler. TASK_USER_PRIO isn't used anymore.
Commit fe443ef2ac ("[POWERPC] spusched: Dynamic timeslicing for
SCHED_OTHER") copied SCALE_PRIO() from the task scheduler in v2.6.23.
Commit a4ec24b48d ("sched: tidy up SCHED_RR") removed it from the task
scheduler in v2.6.24.
Commit 3ee237dddc ("sched/prio: Add 3 macros of MAX_NICE, MIN_NICE and
NICE_WIDTH in prio.h") introduced NICE_WIDTH much later.
With:
MAX_USER_PRIO = USER_PRIO(MAX_PRIO)
= MAX_PRIO - MAX_RT_PRIO
MAX_PRIO = MAX_RT_PRIO + NICE_WIDTH
MAX_USER_PRIO = MAX_RT_PRIO + NICE_WIDTH - MAX_RT_PRIO
MAX_USER_PRIO = NICE_WIDTH
MAX_USER_PRIO can be replaced by NICE_WIDTH to be able to remove all the
{*_}USER_PRIO defines.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210128131040.296856-3-dietmar.eggemann@arm.com
Commit d46523ea32 ("[PATCH] fix MAX_USER_RT_PRIO and MAX_RT_PRIO")
was introduced due to a a small time period in which the realtime patch
set was using different values for MAX_USER_RT_PRIO and MAX_RT_PRIO.
This is no longer true, i.e. now MAX_RT_PRIO == MAX_USER_RT_PRIO.
Get rid of MAX_USER_RT_PRIO and make everything use MAX_RT_PRIO
instead.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210128131040.296856-2-dietmar.eggemann@arm.com
Commit "sched/topology: Make sched_init_numa() use a set for the
deduplicating sort" allocates 'i + nr_levels (level)' instead of
'i + nr_levels + 1' sched_domain_topology_level.
This led to an Oops (on Arm64 juno with CONFIG_SCHED_DEBUG):
sched_init_domains
build_sched_domains()
__free_domain_allocs()
__sdt_free() {
...
for_each_sd_topology(tl)
...
sd = *per_cpu_ptr(sdd->sd, j); <--
...
}
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Barry Song <song.bao.hua@hisilicon.com>
Link: https://lkml.kernel.org/r/6000e39e-7d28-c360-9cd6-8798fd22a9bf@arm.com
Reduce rbtree boiler plate by using the new helpers.
Make rb_add_cached() / rb_erase_cached() return a pointer to the
leftmost node to aid in updating additional state.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Reduce rbtree boiler plate by using the new helper function.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Both select_idle_core() and select_idle_cpu() do a loop over the same
cpumask. Observe that by clearing the already visited CPUs, we can
fold the iteration and iterate a core at a time.
All we need to do is remember any non-idle CPU we encountered while
scanning for an idle core. This way we'll only iterate every CPU once.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210127135203.19633-5-mgorman@techsingularity.net
In order to make the next patch more readable, and to quantify the
actual effectiveness of this pass, start by removing it.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210125085909.4600-4-mgorman@techsingularity.net
Pull RCU updates from Paul E. McKenney:
- Documentation updates.
- Miscellaneous fixes.
- kfree_rcu() updates: Addition of mem_dump_obj() to provide allocator return
addresses to more easily locate bugs. This has a couple of RCU-related commits,
but is mostly MM. Was pulled in with akpm's agreement.
- Per-callback-batch tracking of numbers of callbacks,
which enables better debugging information and smarter
reactions to large numbers of callbacks.
- The first round of changes to allow CPUs to be runtime switched from and to
callback-offloaded state.
- CONFIG_PREEMPT_RT-related changes.
- RCU CPU stall warning updates.
- Addition of polling grace-period APIs for SRCU.
- Torture-test and torture-test scripting updates, including a "torture everything"
script that runs rcutorture, locktorture, scftorture, rcuscale, and refscale.
Plus does an allmodconfig build.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Safely rescheduling while holding a spin lock is essential for keeping
long running kernel operations running smoothly. Add the facility to
cond_resched rwlocks.
CC: Ingo Molnar <mingo@redhat.com>
CC: Will Deacon <will@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210202185734.1680553-9-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As noted by Vincent Guittot, avg_scan_costs are calculated for SIS_PROP
even if SIS_PROP is disabled. Move the time calculations under a SIS_PROP
check and while we are at it, exclude the cost of initialising the CPU
mask from the average scan cost.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210125085909.4600-3-mgorman@techsingularity.net
SIS_AVG_CPU was introduced as a means of avoiding a search when the
average search cost indicated that the search would likely fail. It was
a blunt instrument and disabled by commit 4c77b18cf8 ("sched/fair: Make
select_idle_cpu() more aggressive") and later replaced with a proportional
search depth by commit 1ad3aaf3fc ("sched/core: Implement new approach
to scale select_idle_cpu()").
While there are corner cases where SIS_AVG_CPU is better, it has now been
disabled for almost three years. As the intent of SIS_PROP is to reduce
the time complexity of select_idle_cpu(), lets drop SIS_AVG_CPU and focus
on SIS_PROP as a throttling mechanism.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210125085909.4600-2-mgorman@techsingularity.net
The deduplicating sort in sched_init_numa() assumes that the first line in
the distance table contains all unique values in the entire table. I've
been trying to pen what this exactly means for the topology, but it's not
straightforward. For instance, topology.c uses this example:
node 0 1 2 3
0: 10 20 20 30
1: 20 10 20 20
2: 20 20 10 20
3: 30 20 20 10
0 ----- 1
| / |
| / |
| / |
2 ----- 3
Which works out just fine. However, if we swap nodes 0 and 1:
1 ----- 0
| / |
| / |
| / |
2 ----- 3
we get this distance table:
node 0 1 2 3
0: 10 20 20 20
1: 20 10 20 30
2: 20 20 10 20
3: 20 30 20 10
Which breaks the deduplicating sort (non-representative first line). In
this case this would just be a renumbering exercise, but it so happens that
we can have a deduplicating sort that goes through the whole table in O(n²)
at the extra cost of a temporary memory allocation (i.e. any form of set).
The ACPI spec (SLIT) mentions distances are encoded on 8 bits. Following
this, implement the set as a 256-bits bitmap. Should this not be
satisfactory (i.e. we want to support 32-bit values), then we'll have to go
for some other sparse set implementation.
This has the added benefit of letting us allocate just the right amount of
memory for sched_domains_numa_distance[], rather than an arbitrary
(nr_node_ids + 1).
Note: DT binding equivalent (distance-map) decodes distances as 32-bit
values.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210122123943.1217-2-valentin.schneider@arm.com
If the task is pinned to a cpu, setting the misfit status means that
we'll unnecessarily continuously attempt to migrate the task but fail.
This continuous failure will cause the balance_interval to increase to
a high value, and eventually cause unnecessary significant delays in
balancing the system when real imbalance happens.
Caught while testing uclamp where rt-app calibration loop was pinned to
cpu 0, shortly after which we spawn another task with high util_clamp
value. The task was failing to migrate after over 40ms of runtime due to
balance_interval unnecessary expanded to a very high value from the
calibration loop.
Not done here, but it could be useful to extend the check for pinning to
verify that the affinity of the task has a cpu that fits. We could end
up in a similar situation otherwise.
Fixes: 3b1baa6496 ("sched/fair: Add 'group_misfit_task' load-balance type")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Quentin Perret <qperret@google.com>
Acked-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210119120755.2425264-1-qais.yousef@arm.com
Now that we have KTHREAD_IS_PER_CPU to denote the critical per-cpu
tasks to retain during CPU offline, we can relax the warning in
set_cpus_allowed_ptr(). Any spurious kthread that wants to get on at
the last minute will get pushed off before it can run.
While during CPU online there is no harm, and actual benefit, to
allowing kthreads back on early, it simplifies hotplug code and fixes
a number of outstanding races.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lai jiangshan <jiangshanlai@gmail.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103507.240724591@infradead.org
Prior to commit 1cf12e08bc ("sched/hotplug: Consolidate task
migration on CPU unplug") we'd leave any task on the dying CPU and
break affinity and force them off at the very end.
This scheme had to change in order to enable migrate_disable(). One
cannot wait for migrate_disable() to complete while stuck in
stop_machine(). Furthermore, since we need at the very least: idle,
hotplug and stop threads at any point before stop_machine, we can't
break affinity and/or push those away.
Under the assumption that all per-cpu kthreads are sanely handled by
CPU hotplug, the new code no long breaks affinity or migrates any of
them (which then includes the critical ones above).
However, there's an important difference between per-cpu kthreads and
kthreads that happen to have a single CPU affinity which is lost. The
latter class very much relies on the forced affinity breaking and
migration semantics previously provided.
Use the new kthread_is_per_cpu() infrastructure to tighten
is_per_cpu_kthread() and fix the hot-unplug problems stemming from the
change.
Fixes: 1cf12e08bc ("sched/hotplug: Consolidate task migration on CPU unplug")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103507.102416009@infradead.org
In preparation of using the balance_push state in ttwu() we need it to
provide a reliable and consistent state.
The immediate problem is that rq->balance_callback gets cleared every
schedule() and then re-set in the balance_push_callback() itself. This
is not a reliable signal, so add a variable that stays set during the
entire time.
Also move setting it before the synchronize_rcu() in
sched_cpu_deactivate(), such that we get guaranteed visibility to
ttwu(), which is a preempt-disable region.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103506.966069627@infradead.org
We don't need to push away tasks when we come online, mark the push
complete right before the CPU dies.
XXX hotplug state machine has trouble with rollback here.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103506.415606087@infradead.org
Since commit
1cf12e08bc ("sched/hotplug: Consolidate task migration on CPU unplug")
tasks are expected to move themselves out of a out-going CPU. For most
tasks this will be done automagically via BALANCE_PUSH, but percpu kthreads
will have to cooperate and move themselves away one way or another.
Currently, some percpu kthreads (workqueues being a notable exemple) do not
cooperate nicely and can end up on an out-going CPU at the time
sched_cpu_dying() is invoked.
Print the dying rq's tasks to shed some light on the stragglers.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210113183141.11974-1-valentin.schneider@arm.com
Use the task_current() function where appropriate.
No functional change.
Signed-off-by: Hui Su <sh_def@163.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/r/20201030173223.GA52339@rlk
Active balance is triggered for a number of voluntary cases like misfit
or pinned tasks cases but also after that a number of load balance
attempts failed to migrate a task. There is no need to use active load
balance when the group is overloaded because an overloaded state means
that there is at least one waiting task. Nevertheless, the waiting task
is not selected and detached until the threshold becomes higher than its
load. This threshold increases with the number of failed lb (see the
condition if ((load >> env->sd->nr_balance_failed) > env->imbalance) in
detach_tasks()) and the waiting task will end up to be selected after a
number of attempts.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/20210107103325.30851-4-vincent.guittot@linaro.org
Setting LBF_ALL_PINNED during active load balance is only valid when there
is only 1 running task on the rq otherwise this ends up increasing the
balance interval whereas other tasks could migrate after the next interval
once they become cache-cold as an example.
LBF_ALL_PINNED flag is now always set it by default. It is then cleared
when we find one task that can be pulled when calling detach_tasks() or
during active migration.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/20210107103325.30851-3-vincent.guittot@linaro.org
Don't waste time checking whether an idle cfs_rq could be the busiest
queue. Furthermore, this can end up selecting a cfs_rq with a high load
but being idle in case of migrate_load.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/20210107103325.30851-2-vincent.guittot@linaro.org
CPU (root cfs_rq) estimated utilization (util_est) is currently used in
dequeue_task_fair() to drive frequency selection before it is updated.
with:
CPU_util : rq->cfs.avg.util_avg
CPU_util_est : rq->cfs.avg.util_est
CPU_utilization : max(CPU_util, CPU_util_est)
task_util : p->se.avg.util_avg
task_util_est : p->se.avg.util_est
dequeue_task_fair():
/* (1) CPU_util and task_util update + inform schedutil about
CPU_utilization changes */
for_each_sched_entity() /* 2 loops */
(dequeue_entity() ->) update_load_avg() -> cfs_rq_util_change()
-> cpufreq_update_util() ->...-> sugov_update_[shared\|single]
-> sugov_get_util() -> cpu_util_cfs()
/* (2) CPU_util_est and task_util_est update */
util_est_dequeue()
cpu_util_cfs() uses CPU_utilization which could lead to a false (too
high) utilization value for schedutil in task ramp-down or ramp-up
scenarios during task dequeue.
To mitigate the issue split the util_est update (2) into:
(A) CPU_util_est update in util_est_dequeue()
(B) task_util_est update in util_est_update()
Place (A) before (1) and keep (B) where (2) is. The latter is necessary
since (B) relies on task_util update in (1).
Fixes: 7f65ea42eb ("sched/fair: Add util_est on top of PELT")
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/1608283672-18240-1-git-send-email-xuewen.yan94@gmail.com
SCHED_SOFTIRQ is raised to trigger periodic load balancing. When CPU is not
active, CPU should not participate in load balancing.
The scheduler uses nohz.idle_cpus_mask to keep track of the CPUs which can
do idle load balancing. When bringing a CPU up the CPU is added to the mask
when it reaches the active state, but on teardown the CPU stays in the mask
until it goes offline and invokes sched_cpu_dying().
When SCHED_SOFTIRQ is raised on a !active CPU, there might be a pending
softirq when stopping the tick which triggers a warning in NOHZ code. The
SCHED_SOFTIRQ can also be raised by the scheduler tick which has the same
issue.
Therefore remove the CPU from nohz.idle_cpus_mask when it is marked
inactive and also prevent the scheduler_tick() from raising SCHED_SOFTIRQ
after this point.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/r/20201215104400.9435-1-anna-maria@linutronix.de
There is nothing schedutil specific in schedutil_cpu_util(), rename it
to effective_cpu_util(). Also create and expose another wrapper
sched_cpu_util() which can be used by other parts of the kernel, like
thermal core (that will be done in a later commit).
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/db011961fb3bb8bef1c0eda5cd64564637d3ef31.1607400596.git.viresh.kumar@linaro.org
- Rework the passive-mode "fast switch" path in the intel_pstate
driver to allow it receive the minimum (required) and target
(desired) performance information from the schedutil governor so
as to avoid running some workloads too fast (Rafael Wysocki).
- Make the intel_pstate driver allow the policy max limit to be
increased after the guaranteed performance value for the given
CPU has increased (Rafael Wysocki).
- Clean up the handling of CPU coordination types in the CPPC
cpufreq driver and make it export frequency domains information
to user space via sysfs (Ionela Voinescu).
- Fix the ACPI code handling processor objects to use a correct
coordination type when it fails to map frequency domains and drop
a redundant CPU map initialization from it (Ionela Voinescu, Punit
Agrawal).
-----BEGIN PGP SIGNATURE-----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=AcdB
-----END PGP SIGNATURE-----
Merge tag 'pm-5.11-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the CPPC cpufreq driver and intel_pstate (which involves
updating the cpufreq core and the schedutil governor) and make
janitorial changes in the ACPI code handling processor objects.
Specifics:
- Rework the passive-mode "fast switch" path in the intel_pstate
driver to allow it receive the minimum (required) and target
(desired) performance information from the schedutil governor so as
to avoid running some workloads too fast (Rafael Wysocki).
- Make the intel_pstate driver allow the policy max limit to be
increased after the guaranteed performance value for the given CPU
has increased (Rafael Wysocki).
- Clean up the handling of CPU coordination types in the CPPC cpufreq
driver and make it export frequency domains information to user
space via sysfs (Ionela Voinescu).
- Fix the ACPI code handling processor objects to use a correct
coordination type when it fails to map frequency domains and drop a
redundant CPU map initialization from it (Ionela Voinescu, Punit
Agrawal)"
* tag 'pm-5.11-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Use most recent guaranteed performance values
cpufreq: intel_pstate: Implement the ->adjust_perf() callback
cpufreq: Add special-purpose fast-switching callback for drivers
cpufreq: schedutil: Add util to struct sg_cpu
cppc_cpufreq: replace per-cpu data array with a list
cppc_cpufreq: expose information on frequency domains
cppc_cpufreq: clarify support for coordination types
cppc_cpufreq: use policy->cpu as driver of frequency setting
ACPI: processor: fix NONE coordination for domain mapping failure
* pm-cpufreq:
cpufreq: intel_pstate: Use most recent guaranteed performance values
cpufreq: intel_pstate: Implement the ->adjust_perf() callback
cpufreq: Add special-purpose fast-switching callback for drivers
cpufreq: schedutil: Add util to struct sg_cpu
cppc_cpufreq: replace per-cpu data array with a list
cppc_cpufreq: expose information on frequency domains
cppc_cpufreq: clarify support for coordination types
cppc_cpufreq: use policy->cpu as driver of frequency setting
ACPI: processor: fix NONE coordination for domain mapping failure
ACPI: processor: Drop duplicate setting of shared_cpu_map
* PSCI relay at EL2 when "protected KVM" is enabled
* New exception injection code
* Simplification of AArch32 system register handling
* Fix PMU accesses when no PMU is enabled
* Expose CSV3 on non-Meltdown hosts
* Cache hierarchy discovery fixes
* PV steal-time cleanups
* Allow function pointers at EL2
* Various host EL2 entry cleanups
* Simplification of the EL2 vector allocation
s390:
* memcg accouting for s390 specific parts of kvm and gmap
* selftest for diag318
* new kvm_stat for when async_pf falls back to sync
x86:
* Tracepoints for the new pagetable code from 5.10
* Catch VFIO and KVM irqfd events before userspace
* Reporting dirty pages to userspace with a ring buffer
* SEV-ES host support
* Nested VMX support for wait-for-SIPI activity state
* New feature flag (AVX512 FP16)
* New system ioctl to report Hyper-V-compatible paravirtualization features
Generic:
* Selftest improvements
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl/bdL4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNgQQgAnTH6rhXa++Zd5F0EM2NwXwz3iEGb
lOq1DZSGjs6Eekjn8AnrWbmVQr+CBCuGU9MrxpSSzNDK/awryo3NwepOWAZw9eqk
BBCVwGBbJQx5YrdgkGC0pDq2sNzcpW/VVB3vFsmOxd9eHblnuKSIxEsCCXTtyqIt
XrLpQ1UhvI4yu102fDNhuFw2EfpzXm+K0Lc0x6idSkdM/p7SyeOxiv8hD4aMr6+G
bGUQuMl4edKZFOWFigzr8NovQAvDHZGrwfihu2cLRYKLhV97QuWVmafv/yYfXcz2
drr+wQCDNzDOXyANnssmviazrhOX0QmTAhbIXGGX/kTxYKcfPi83ZLoI3A==
=ISud
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"Much x86 work was pushed out to 5.12, but ARM more than made up for it.
ARM:
- PSCI relay at EL2 when "protected KVM" is enabled
- New exception injection code
- Simplification of AArch32 system register handling
- Fix PMU accesses when no PMU is enabled
- Expose CSV3 on non-Meltdown hosts
- Cache hierarchy discovery fixes
- PV steal-time cleanups
- Allow function pointers at EL2
- Various host EL2 entry cleanups
- Simplification of the EL2 vector allocation
s390:
- memcg accouting for s390 specific parts of kvm and gmap
- selftest for diag318
- new kvm_stat for when async_pf falls back to sync
x86:
- Tracepoints for the new pagetable code from 5.10
- Catch VFIO and KVM irqfd events before userspace
- Reporting dirty pages to userspace with a ring buffer
- SEV-ES host support
- Nested VMX support for wait-for-SIPI activity state
- New feature flag (AVX512 FP16)
- New system ioctl to report Hyper-V-compatible paravirtualization features
Generic:
- Selftest improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits)
KVM: SVM: fix 32-bit compilation
KVM: SVM: Add AP_JUMP_TABLE support in prep for AP booting
KVM: SVM: Provide support to launch and run an SEV-ES guest
KVM: SVM: Provide an updated VMRUN invocation for SEV-ES guests
KVM: SVM: Provide support for SEV-ES vCPU loading
KVM: SVM: Provide support for SEV-ES vCPU creation/loading
KVM: SVM: Update ASID allocation to support SEV-ES guests
KVM: SVM: Set the encryption mask for the SVM host save area
KVM: SVM: Add NMI support for an SEV-ES guest
KVM: SVM: Guest FPU state save/restore not needed for SEV-ES guest
KVM: SVM: Do not report support for SMM for an SEV-ES guest
KVM: x86: Update __get_sregs() / __set_sregs() to support SEV-ES
KVM: SVM: Add support for CR8 write traps for an SEV-ES guest
KVM: SVM: Add support for CR4 write traps for an SEV-ES guest
KVM: SVM: Add support for CR0 write traps for an SEV-ES guest
KVM: SVM: Add support for EFER write traps for an SEV-ES guest
KVM: SVM: Support string IO operations for an SEV-ES guest
KVM: SVM: Support MMIO for an SEV-ES guest
KVM: SVM: Create trace events for VMGEXIT MSR protocol processing
KVM: SVM: Create trace events for VMGEXIT processing
...
- Use local_clock() instead of jiffies in the cpufreq statistics to
improve accuracy (Viresh Kumar).
- Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
drivers (Viresh Kumar).
- Clean up the cpufreq core, the intel_pstate driver and the
schedutil cpufreq governor (Rafael Wysocki).
- Fix up error code paths in the sti-cpufreq and mediatek cpufreq
drivers (Yangtao Li, Qinglang Miao).
- Fix cpufreq_online() to return error codes instead of success (0)
in all cases when it fails (Wang ShaoBo).
- Add mt8167 support to the mediatek cpufreq driver and blacklist
mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).
- Modify the tegra194 cpufreq driver to always return values from
the frequency table as the current frequency and clean up that
driver (Sumit Gupta, Jon Hunter).
- Modify the arm_scmi cpufreq driver to allow it to discover the
power scale present in the performance protocol and provide this
information to the Energy Model (Lukasz Luba).
- Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
Rohár).
- Clean up the CPPC cpufreq driver (Ionela Voinescu).
- Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
Bergmann).
- Rework the poling interval selection for the polling state in
cpuidle (Mel Gorman).
- Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle
driver (Ulf Hansson).
- Modify the OPP framework to support empty (node-less) OPP tables
in DT for passing dependency information (Nicola Mazzucato).
- Fix potential lockdep issue in the OPP core and clean up the OPP
core (Viresh Kumar).
- Modify dev_pm_opp_put_regulators() to accept a NULL argument and
update its users accordingly (Viresh Kumar).
- Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).
- Add support for governor feature flags to devfreq, make devfreq
sysfs file permissions depend on the governor and clean up the
devfreq core (Chanwoo Choi).
- Clean up the tegra20 devfreq driver and deprecate it to allow
another driver based on EMC_STAT to be used instead of it (Dmitry
Osipenko).
- Add interconnect support to the tegra30 devfreq driver, allow it
to take the interconnect and OPP information from DT and clean it
up ((Dmitry Osipenko).
- Add interconnect support to the exynos-bus devfreq driver along
with interconnect properties documentation (Sylwester Nawrocki).
- Add suport for AMD Fam17h and Fam19h processors to the RAPL power
capping driver (Victor Ding, Kim Phillips).
- Fix handling of overly long constraint names in the powercap
framework (Lukasz Luba).
- Fix the wakeup configuration handling for bridges in the ACPI
device power management core (Rafael Wysocki).
- Add support for using an abstract scale for power units in the
Energy Model (EM) and document it (Lukasz Luba).
- Add em_cpu_energy() micro-optimization to the EM (Pavankumar
Kondeti).
- Modify the generic power domains (genpd) framwework to support
suspend-to-idle (Ulf Hansson).
- Fix creation of debugfs nodes in genpd (Thierry Strudel).
- Clean up genpd (Lina Iyer).
- Clean up the core system-wide suspend code and make it print
driver flags for devices with debug enabled (Alex Shi, Patrice
Chotard, Chen Yu).
- Modify the ACPI system reboot code to make it prepare for system
power off to avoid confusing the platform firmware (Kai-Heng Feng).
- Update the pm-graph (multiple changes, mostly usability-related)
and cpupower (online and offline CPU information support) PM
utilities (Todd Brandt, Brahadambal Srinivasan).
-----BEGIN PGP SIGNATURE-----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=BVdX
-----END PGP SIGNATURE-----
Merge tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These update cpufreq (core and drivers), cpuidle (polling state
implementation and the PSCI driver), the OPP (operating performance
points) framework, devfreq (core and drivers), the power capping RAPL
(Running Average Power Limit) driver, the Energy Model support, the
generic power domains (genpd) framework, the ACPI device power
management, the core system-wide suspend code and power management
utilities.
Specifics:
- Use local_clock() instead of jiffies in the cpufreq statistics to
improve accuracy (Viresh Kumar).
- Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
drivers (Viresh Kumar).
- Clean up the cpufreq core, the intel_pstate driver and the
schedutil cpufreq governor (Rafael Wysocki).
- Fix up error code paths in the sti-cpufreq and mediatek cpufreq
drivers (Yangtao Li, Qinglang Miao).
- Fix cpufreq_online() to return error codes instead of success (0)
in all cases when it fails (Wang ShaoBo).
- Add mt8167 support to the mediatek cpufreq driver and blacklist
mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).
- Modify the tegra194 cpufreq driver to always return values from the
frequency table as the current frequency and clean up that driver
(Sumit Gupta, Jon Hunter).
- Modify the arm_scmi cpufreq driver to allow it to discover the
power scale present in the performance protocol and provide this
information to the Energy Model (Lukasz Luba).
- Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
Rohár).
- Clean up the CPPC cpufreq driver (Ionela Voinescu).
- Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
Bergmann).
- Rework the poling interval selection for the polling state in
cpuidle (Mel Gorman).
- Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver
(Ulf Hansson).
- Modify the OPP framework to support empty (node-less) OPP tables in
DT for passing dependency information (Nicola Mazzucato).
- Fix potential lockdep issue in the OPP core and clean up the OPP
core (Viresh Kumar).
- Modify dev_pm_opp_put_regulators() to accept a NULL argument and
update its users accordingly (Viresh Kumar).
- Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).
- Add support for governor feature flags to devfreq, make devfreq
sysfs file permissions depend on the governor and clean up the
devfreq core (Chanwoo Choi).
- Clean up the tegra20 devfreq driver and deprecate it to allow
another driver based on EMC_STAT to be used instead of it (Dmitry
Osipenko).
- Add interconnect support to the tegra30 devfreq driver, allow it to
take the interconnect and OPP information from DT and clean it up
(Dmitry Osipenko).
- Add interconnect support to the exynos-bus devfreq driver along
with interconnect properties documentation (Sylwester Nawrocki).
- Add suport for AMD Fam17h and Fam19h processors to the RAPL power
capping driver (Victor Ding, Kim Phillips).
- Fix handling of overly long constraint names in the powercap
framework (Lukasz Luba).
- Fix the wakeup configuration handling for bridges in the ACPI
device power management core (Rafael Wysocki).
- Add support for using an abstract scale for power units in the
Energy Model (EM) and document it (Lukasz Luba).
- Add em_cpu_energy() micro-optimization to the EM (Pavankumar
Kondeti).
- Modify the generic power domains (genpd) framwework to support
suspend-to-idle (Ulf Hansson).
- Fix creation of debugfs nodes in genpd (Thierry Strudel).
- Clean up genpd (Lina Iyer).
- Clean up the core system-wide suspend code and make it print driver
flags for devices with debug enabled (Alex Shi, Patrice Chotard,
Chen Yu).
- Modify the ACPI system reboot code to make it prepare for system
power off to avoid confusing the platform firmware (Kai-Heng Feng).
- Update the pm-graph (multiple changes, mostly usability-related)
and cpupower (online and offline CPU information support) PM
utilities (Todd Brandt, Brahadambal Srinivasan)"
* tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits)
cpufreq: Fix cpufreq_online() return value on errors
cpufreq: Fix up several kerneldoc comments
cpufreq: stats: Use local_clock() instead of jiffies
cpufreq: schedutil: Simplify sugov_update_next_freq()
cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate()
PM: domains: create debugfs nodes when adding power domains
opp: of: Allow empty opp-table with opp-shared
dt-bindings: opp: Allow empty OPP tables
media: venus: dev_pm_opp_put_*() accepts NULL argument
drm/panfrost: dev_pm_opp_put_*() accepts NULL argument
drm/lima: dev_pm_opp_put_*() accepts NULL argument
PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument
cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument
cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument
opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table
opp: Don't create an OPP table from dev_pm_opp_get_opp_table()
cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table
opp: Reduce the size of critical section in _opp_kref_release()
PM / EM: Micro optimization in em_cpu_energy
cpufreq: arm_scmi: Discover the power scale in performance protocol
...
Core:
- Consolidation and robustness changes for irq time accounting
- Cleanup and consolidation of irq stats
- Remove the fasteoi IPI flow which has been proved useless
- Provide an interface for converting legacy interrupt mechanism into
irqdomains
Drivers:
The rare event of not having completely new chip driver code, just new
DT bindings and extensions of existing drivers to accomodate new
variants!
- Preliminary support for managed interrupts on platform devices
- Correctly identify allocation of MSIs proxyied by another device
- Generalise the Ocelot support to new SoCs
- Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation
- Work around spurious interrupts on Qualcomm PDC
- Random fixes and cleanups
Thanks,
tglx
-----BEGIN PGP SIGNATURE-----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=iytv
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Generic interrupt and irqchips subsystem updates. Unusually, there is
not a single completely new irq chip driver, just new DT bindings and
extensions of existing drivers to accomodate new variants!
Core:
- Consolidation and robustness changes for irq time accounting
- Cleanup and consolidation of irq stats
- Remove the fasteoi IPI flow which has been proved useless
- Provide an interface for converting legacy interrupt mechanism into
irqdomains
Drivers:
- Preliminary support for managed interrupts on platform devices
- Correctly identify allocation of MSIs proxyied by another device
- Generalise the Ocelot support to new SoCs
- Improve GICv4.1 vcpu entry, matching the corresponding KVM
optimisation
- Work around spurious interrupts on Qualcomm PDC
- Random fixes and cleanups"
* tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
irqchip/qcom-pdc: Fix phantom irq when changing between rising/falling
driver core: platform: Add devm_platform_get_irqs_affinity()
ACPI: Drop acpi_dev_irqresource_disabled()
resource: Add irqresource_disabled()
genirq/affinity: Add irq_update_affinity_desc()
irqchip/gic-v3-its: Flag device allocation as proxied if behind a PCI bridge
irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device
platform-msi: Track shared domain allocation
irqchip/ti-sci-intr: Fix freeing of irqs
irqchip/ti-sci-inta: Fix printing of inta id on probe success
drivers/irqchip: Remove EZChip NPS interrupt controller
Revert "genirq: Add fasteoi IPI flow"
irqchip/hip04: Make IPIs use handle_percpu_devid_irq()
irqchip/bcm2836: Make IPIs use handle_percpu_devid_irq()
irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq()
irqchip/gic, gic-v3: Make SGIs use handle_percpu_devid_irq()
irqchip/ocelot: Add support for Jaguar2 platforms
irqchip/ocelot: Add support for Serval platforms
irqchip/ocelot: Add support for Luton platforms
irqchip/ocelot: prepare to support more SoC
...
First off, some cpufreq drivers (eg. intel_pstate) can pass hints
beyond the current target frequency to the hardware and there are no
provisions for doing that in the cpufreq framework. In particular,
today the driver has to assume that it should not allow the frequency
to fall below the one requested by the governor (or the required
capacity may not be provided) which may not be the case and which may
lead to excessive energy usage in some scenarios.
Second, the hints passed by these drivers to the hardware need not be
in terms of the frequency, so representing the utilization numbers
coming from the scheduler as frequency before passing them to those
drivers is not really useful.
Address the two points above by adding a special-purpose replacement
for the ->fast_switch callback, called ->adjust_perf, allowing the
governor to pass abstract performance level (rather than frequency)
values for the minimum (required) and target (desired) performance
along with the CPU capacity to compare them to.
Also update the schedutil governor to use the new callback instead
of ->fast_switch if present and if the utilization mertics are
frequency-invariant (that is requisite for the direct mapping
between the utilization and the CPU performance levels to be a
reasonable approximation).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Instead of passing util and max between functions while computing the
utilization and capacity, store the former in struct sg_cpu (along
with the latter and bw_dl).
This will allow the current utilization value to be compared with the
one obtained previously (which is requisite for some code changes to
follow this one), but also it causes the code to look slightly more
consistent and cleaner.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
- PSCI relay at EL2 when "protected KVM" is enabled
- New exception injection code
- Simplification of AArch32 system register handling
- Fix PMU accesses when no PMU is enabled
- Expose CSV3 on non-Meltdown hosts
- Cache hierarchy discovery fixes
- PV steal-time cleanups
- Allow function pointers at EL2
- Various host EL2 entry cleanups
- Simplification of the EL2 vector allocation
-----BEGIN PGP SIGNATURE-----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=hf4L
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.11
- PSCI relay at EL2 when "protected KVM" is enabled
- New exception injection code
- Simplification of AArch32 system register handling
- Fix PMU accesses when no PMU is enabled
- Expose CSV3 on non-Meltdown hosts
- Cache hierarchy discovery fixes
- PV steal-time cleanups
- Allow function pointers at EL2
- Various host EL2 entry cleanups
- Simplification of the EL2 vector allocation
The kernel test robot measured a -1.6% performance regression on
will-it-scale/sched_yield due to commit:
2558aacff8 ("sched/hotplug: Ensure only per-cpu kthreads run during hotplug")
Even though we were careful to replace a single load with another
single load from the same cacheline.
Restore finish_lock_switch() to the exact state before the offending
patch and solve the problem differently.
Fixes: 2558aacff8 ("sched/hotplug: Ensure only per-cpu kthreads run during hotplug")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201210161408.GX3021@hirez.programming.kicks-ass.net
- Preliminary support for managed interrupts on platform devices
- Correctly identify allocation of MSIs proxyied by another device
- Remove the fasteoi IPI flow which has been proved useless
- Generalise the Ocelot support to new SoCs
- Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation
- Work around spurious interrupts on Qualcomm PDC
- Random fixes and cleanups
-----BEGIN PGP SIGNATURE-----
iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl/Uxq8PHG1hekBrZXJu
ZWwub3JnAAoJECPQ0LrRPXpDoW0P/0ZMDvFPxrfnJD46exUgUOPuuFF8jZxAlxD8
7UExqar7u6yX7bbq394jPgtOOxldDagfCx/jCXgb9ja7DK5EHKRcrfjaDT8knHi2
Keg5RaRMRi9TVltvWQTxAkXwSv0Atl881qqsndPeZCez0GNZp+HB34s+rNkZwBOu
MBrWihMQOSv5QE6milsNc7HXLSHM1eLZ7Y2XgumNtKrIGEX9yZI7qwdMofwP8Za3
ayMOvc1WAWaTJI7Mg5ac1yTCVbqLmRHhCtws6c6DMgaRu6SI0itmbpQzkDuJJIe3
k9h4KQPaKAFcQsoo3GV0MKTMm63eq82XT3CAdv+htYRY1z95D2+nzNK+mJtsGptX
gJ2zeJkUb4u+yVtNguL9qjo5ssCXV/6IybJxv6baaEFnSwQMUwqa066NdxmtqfIe
1BOWnc153a7SRbQ34M9/llje+v8YJbueGMS2RFR2LQ6IjjpaHsXh+YCZokfA/kdk
zGbOUD5WWFtFD1T3UoaJ4gFt+pzHjNqym4CcEj4S1Vf5y+POUkNmC+GYK+xfm2Fp
WJMbdIUxJhHFRD9L1ShtfAVUSbp712VOOdILp9rYAkOdqfb51BVUiMUP++s2dGp1
ZIT78qt7kTKT1CxbDdFAjzsi7RoMqdSGYgKmG4sVprELeZnFwq47nBkBr8XEQ1TT
0ccEUOY8
=7Z24
-----END PGP SIGNATURE-----
Merge tag 'irqchip-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates for 5.11 from Marc Zyngier:
- Preliminary support for managed interrupts on platform devices
- Correctly identify allocation of MSIs proxyied by another device
- Remove the fasteoi IPI flow which has been proved useless
- Generalise the Ocelot support to new SoCs
- Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation
- Work around spurious interrupts on Qualcomm PDC
- Random fixes and cleanups
Link: https://lore.kernel.org/r/20201212135626.1479884-1-maz@kernel.org
- Consolidate all kmap_atomic() internals into a generic implementation
which builds the base for the kmap_local() API and make the
kmap_atomic() interface wrappers which handle the disabling/enabling of
preemption and pagefaults.
- Switch the storage from per-CPU to per task and provide scheduler
support for clearing mapping when scheduling out and restoring them
when scheduling back in.
- Merge the migrate_disable/enable() code, which is also part of the
scheduler pull request. This was required to make the kmap_local()
interface available which does not disable preemption when a mapping
is established. It has to disable migration instead to guarantee that
the virtual address of the mapped slot is the same accross preemption.
- Provide better debug facilities: guard pages and enforced utilization
of the mapping mechanics on 64bit systems when the architecture allows
it.
- Provide the new kmap_local() API which can now be used to cleanup the
kmap_atomic() usage sites all over the place. Most of the usage sites
do not require the implicit disabling of preemption and pagefaults so
the penalty on 64bit and 32bit non-highmem systems is removed and quite
some of the code can be simplified. A wholesale conversion is not
possible because some usage depends on the implicit side effects and
some need to be cleaned up because they work around these side effects.
The migrate disable side effect is only effective on highmem systems
and when enforced debugging is enabled. On 64bit and 32bit non-highmem
systems the overhead is completely avoided.
-----BEGIN PGP SIGNATURE-----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=n71I
-----END PGP SIGNATURE-----
Merge tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull kmap updates from Thomas Gleixner:
"The new preemtible kmap_local() implementation:
- Consolidate all kmap_atomic() internals into a generic
implementation which builds the base for the kmap_local() API and
make the kmap_atomic() interface wrappers which handle the
disabling/enabling of preemption and pagefaults.
- Switch the storage from per-CPU to per task and provide scheduler
support for clearing mapping when scheduling out and restoring them
when scheduling back in.
- Merge the migrate_disable/enable() code, which is also part of the
scheduler pull request. This was required to make the kmap_local()
interface available which does not disable preemption when a
mapping is established. It has to disable migration instead to
guarantee that the virtual address of the mapped slot is the same
across preemption.
- Provide better debug facilities: guard pages and enforced
utilization of the mapping mechanics on 64bit systems when the
architecture allows it.
- Provide the new kmap_local() API which can now be used to cleanup
the kmap_atomic() usage sites all over the place. Most of the usage
sites do not require the implicit disabling of preemption and
pagefaults so the penalty on 64bit and 32bit non-highmem systems is
removed and quite some of the code can be simplified. A wholesale
conversion is not possible because some usage depends on the
implicit side effects and some need to be cleaned up because they
work around these side effects.
The migrate disable side effect is only effective on highmem
systems and when enforced debugging is enabled. On 64bit and 32bit
non-highmem systems the overhead is completely avoided"
* tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
ARM: highmem: Fix cache_is_vivt() reference
x86/crashdump/32: Simplify copy_oldmem_page()
io-mapping: Provide iomap_local variant
mm/highmem: Provide kmap_local*
sched: highmem: Store local kmaps in task struct
x86: Support kmap_local() forced debugging
mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP
mm/highmem: Provide and use CONFIG_DEBUG_KMAP_LOCAL
microblaze/mm/highmem: Add dropped #ifdef back
xtensa/mm/highmem: Make generic kmap_atomic() work correctly
mm/highmem: Take kmap_high_get() properly into account
highmem: High implementation details and document API
Documentation/io-mapping: Remove outdated blurb
io-mapping: Cleanup atomic iomap
mm/highmem: Remove the old kmap_atomic cruft
highmem: Get rid of kmap_types.h
xtensa/mm/highmem: Switch to generic kmap atomic
sparc/mm/highmem: Switch to generic kmap atomic
powerpc/mm/highmem: Switch to generic kmap atomic
nds32/mm/highmem: Switch to generic kmap atomic
...
- migrate_disable/enable() support which originates from the RT tree and
is now a prerequisite for the new preemptible kmap_local() API which aims
to replace kmap_atomic().
- A fair amount of topology and NUMA related improvements
- Improvements for the frequency invariant calculations
- Enhanced robustness for the global CPU priority tracking and decision
making
- The usual small fixes and enhancements all over the place
-----BEGIN PGP SIGNATURE-----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=Oz1V
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner:
- migrate_disable/enable() support which originates from the RT tree
and is now a prerequisite for the new preemptible kmap_local() API
which aims to replace kmap_atomic().
- A fair amount of topology and NUMA related improvements
- Improvements for the frequency invariant calculations
- Enhanced robustness for the global CPU priority tracking and decision
making
- The usual small fixes and enhancements all over the place
* tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits)
sched/fair: Trivial correction of the newidle_balance() comment
sched/fair: Clear SMT siblings after determining the core is not idle
sched: Fix kernel-doc markup
x86: Print ratio freq_max/freq_base used in frequency invariance calculations
x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC
x86, sched: Calculate frequency invariance for AMD systems
irq_work: Optimize irq_work_single()
smp: Cleanup smp_call_function*()
irq_work: Cleanup
sched: Limit the amount of NUMA imbalance that can exist at fork time
sched/numa: Allow a floating imbalance between NUMA nodes
sched: Avoid unnecessary calculation of load imbalance at clone time
sched/numa: Rename nr_running and break out the magic number
sched: Make migrate_disable/enable() independent of RT
sched/topology: Condition EAS enablement on FIE support
arm64: Rebuild sched domains on invariance status changes
sched/topology,schedutil: Wrap sched domains rebuild
sched/uclamp: Allow to reset a task uclamp constraint value
sched/core: Fix typos in comments
Documentation: scheduler: fix information on arch SD flags, sched_domain and sched_debug
...
- More generalization of entry/exit functionality
- The consolidation work to reclaim TIF flags on x86 and also for non-x86
specific TIF flags which are solely relevant for syscall related work
and have been moved into their own storage space. The x86 specific part
had to be merged in to avoid a major conflict.
- The TIF_NOTIFY_SIGNAL work which replaces the inefficient signal
delivery mode of task work and results in an impressive performance
improvement for io_uring. The non-x86 consolidation of this is going to
come seperate via Jens.
- The selective syscall redirection facility which provides a clean and
efficient way to support the non-Linux syscalls of WINE by catching them
at syscall entry and redirecting them to the user space emulation. This
can be utilized for other purposes as well and has been designed
carefully to avoid overhead for the regular fastpath. This includes the
core changes and the x86 support code.
- Simplification of the context tracking entry/exit handling for the users
of the generic entry code which guarantee the proper ordering and
protection.
- Preparatory changes to make the generic entry code accomodate S390
specific requirements which are mostly related to their syscall restart
mechanism.
-----BEGIN PGP SIGNATURE-----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=hsjV
-----END PGP SIGNATURE-----
Merge tag 'core-entry-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core entry/exit updates from Thomas Gleixner:
"A set of updates for entry/exit handling:
- More generalization of entry/exit functionality
- The consolidation work to reclaim TIF flags on x86 and also for
non-x86 specific TIF flags which are solely relevant for syscall
related work and have been moved into their own storage space. The
x86 specific part had to be merged in to avoid a major conflict.
- The TIF_NOTIFY_SIGNAL work which replaces the inefficient signal
delivery mode of task work and results in an impressive performance
improvement for io_uring. The non-x86 consolidation of this is
going to come seperate via Jens.
- The selective syscall redirection facility which provides a clean
and efficient way to support the non-Linux syscalls of WINE by
catching them at syscall entry and redirecting them to the user
space emulation. This can be utilized for other purposes as well
and has been designed carefully to avoid overhead for the regular
fastpath. This includes the core changes and the x86 support code.
- Simplification of the context tracking entry/exit handling for the
users of the generic entry code which guarantee the proper ordering
and protection.
- Preparatory changes to make the generic entry code accomodate S390
specific requirements which are mostly related to their syscall
restart mechanism"
* tag 'core-entry-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
entry: Add syscall_exit_to_user_mode_work()
entry: Add exit_to_user_mode() wrapper
entry_Add_enter_from_user_mode_wrapper
entry: Rename exit_to_user_mode()
entry: Rename enter_from_user_mode()
docs: Document Syscall User Dispatch
selftests: Add benchmark for syscall user dispatch
selftests: Add kselftest for syscall user dispatch
entry: Support Syscall User Dispatch on common syscall entry
kernel: Implement selective syscall userspace redirection
signal: Expose SYS_USER_DISPATCH si_code type
x86: vdso: Expose sigreturn address on vdso to the kernel
MAINTAINERS: Add entry for common entry code
entry: Fix boot for !CONFIG_GENERIC_ENTRY
x86: Support HAVE_CONTEXT_TRACKING_OFFSTACK
context_tracking: Only define schedule_user() on !HAVE_CONTEXT_TRACKING_OFFSTACK archs
sched: Detect call to schedule from critical entry code
context_tracking: Don't implement exception_enter/exit() on CONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK
context_tracking: Introduce HAVE_CONTEXT_TRACKING_OFFSTACK
x86: Reclaim unused x86 TI flags
...
Rearrange a conditional to make it more straightforward.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
idle_balance() has been renamed to newidle_balance(). To differentiate
with nohz_idle_balance, it seems refining the comment will be helpful
for the readers of the code.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20201202220641.22752-1-song.bao.hua@hisilicon.com
The clearing of SMT siblings from the SIS mask before checking for an idle
core is a small but unnecessary cost. Defer the clearing of the siblings
until the scan moves to the next potential target. The cost of this was
not measured as it is borderline noise but it should be self-evident.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20201130144020.GS3371@techsingularity.net
Kernel-doc requires that a kernel-doc markup to be immediately
below the function prototype, as otherwise it will rename it.
So, move sys_sched_yield() markup to the right place.
Also fix the cpu_util() markup: Kernel-doc markups
should use this format:
identifier - description
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/50cd6f460aeb872ebe518a8e9cfffda2df8bdb0a.1606823973.git.mchehab+huawei@kernel.org
membarrier()'s MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE is documented as
syncing the core on all sibling threads but not necessarily the calling
thread. This behavior is fundamentally buggy and cannot be used safely.
Suppose a user program has two threads. Thread A is on CPU 0 and thread B
is on CPU 1. Thread A modifies some text and calls
membarrier(MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE).
Then thread B executes the modified code. If, at any point after
membarrier() decides which CPUs to target, thread A could be preempted and
replaced by thread B on CPU 0. This could even happen on exit from the
membarrier() syscall. If this happens, thread B will end up running on CPU
0 without having synced.
In principle, this could be fixed by arranging for the scheduler to issue
sync_core_before_usermode() whenever switching between two threads in the
same mm if there is any possibility of a concurrent membarrier() call, but
this would have considerable overhead. Instead, make membarrier() sync the
calling CPU as well.
As an optimization, this avoids an extra smp_mb() in the default
barrier-only mode and an extra rseq preempt on the caller.
Fixes: 70216e18e5 ("membarrier: Provide core serializing command, *_SYNC_CORE")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/250ded637696d490c69bef1877148db86066881c.1607058304.git.luto@kernel.org
membarrier() does not explicitly sync_core() remote CPUs; instead, it
relies on the assumption that an IPI will result in a core sync. On x86,
this may be true in practice, but it's not architecturally reliable. In
particular, the SDM and APM do not appear to guarantee that interrupt
delivery is serializing. While IRET does serialize, IPI return can
schedule, thereby switching to another task in the same mm that was
sleeping in a syscall. The new task could then SYSRET back to usermode
without ever executing IRET.
Make this more robust by explicitly calling sync_core_before_usermode()
on remote cores. (This also helps people who search the kernel tree for
instances of sync_core() and sync_core_before_usermode() -- one might be
surprised that the core membarrier code doesn't currently show up in a
such a search.)
Fixes: 70216e18e5 ("membarrier: Provide core serializing command, *_SYNC_CORE")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/776b448d5f7bd6b12690707f5ed67bcda7f1d427.1607058304.git.luto@kernel.org
It seems that most RSEQ membarrier users will expect any stores done before
the membarrier() syscall to be visible to the target task(s). While this
is extremely likely to be true in practice, nothing actually guarantees it
by a strict reading of the x86 manuals. Rather than providing this
guarantee by accident and potentially causing a problem down the road, just
add an explicit barrier.
Fixes: 70216e18e5 ("membarrier: Provide core serializing command, *_SYNC_CORE")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/d3e7197e034fa4852afcf370ca49c30496e58e40.1607058304.git.luto@kernel.org
IRQ time entry is currently accounted before HARDIRQ_OFFSET or
SOFTIRQ_OFFSET are incremented. This is convenient to decide to which
index the cputime to account is dispatched.
Unfortunately it prevents tick_irq_enter() from being called under
HARDIRQ_OFFSET because tick_irq_enter() has to be called before the IRQ
entry accounting due to the necessary clock catch up. As a result we
don't benefit from appropriate lockdep coverage on tick_irq_enter().
To prepare for fixing this, move the IRQ entry cputime accounting after
the preempt offset is incremented. This requires the cputime dispatch
code to handle the extra offset.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20201202115732.27827-5-frederic@kernel.org
The 3 architectures implementing CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
all have their own version of irq time accounting that dispatch the
cputime to the appropriate index: hardirq, softirq, system, idle,
guest... from an all-in-one function.
Instead of having these ad-hoc versions, move the cputime destination
dispatch decision to the core code and leave only the actual per-index
cputime accounting to the architecture.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201202115732.27827-4-frederic@kernel.org
s390 has its own version of IRQ entry accounting because it doesn't
account the idle time the same way the other architectures do. Only
the actual idle sleep time is accounted as idle time, the rest of the
idle task execution is accounted as system time.
Make the generic IRQ entry accounting aware of architectures that have
their own way of accounting idle time and convert s390 to use it.
This prepares s390 to get involved in further consolidations of IRQ
time accounting.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201202115732.27827-3-frederic@kernel.org
account_irq_enter_time() and account_irq_exit_time() are not called
from modules. EXPORT_SYMBOL_GPL() can be safely removed from the IRQ
cputime accounting functions called from there.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201202115732.27827-2-frederic@kernel.org
idle path. Similar to the entry path the low level idle functions have to
be non-instrumentable.
-----BEGIN PGP SIGNATURE-----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=raED
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Two more places which invoke tracing from RCU disabled regions in the
idle path.
Similar to the entry path the low level idle functions have to be
non-instrumentable"
* tag 'locking-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
intel_idle: Fix intel_idle() vs tracing
sched/idle: Fix arch_cpu_idle() vs tracing
Get rid of the __call_single_node union and cleanup the API a little
to avoid external code relying on the structure layout as much.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
At fork time currently, a local node can be allowed to fill completely
and allow the periodic load balancer to fix the problem. This can be
problematic in cases where a task creates lots of threads that idle until
woken as part of a worker poll causing a memory bandwidth problem.
However, a "real" workload suffers badly from this behaviour. The workload
in question is mostly NUMA aware but spawns large numbers of threads
that act as a worker pool that can be called from anywhere. These need
to spread early to get reasonable behaviour.
This patch limits how much a local node can fill before spilling over
to another node and it will not be a universal win. Specifically,
very short-lived workloads that fit within a NUMA node would prefer
the memory bandwidth.
As I cannot describe the "real" workload, the best proxy measure I found
for illustration was a page fault microbenchmark. It's not representative
of the workload but demonstrates the hazard of the current behaviour.
pft timings
5.10.0-rc2 5.10.0-rc2
imbalancefloat-v2 forkspread-v2
Amean elapsed-1 46.37 ( 0.00%) 46.05 * 0.69%*
Amean elapsed-4 12.43 ( 0.00%) 12.49 * -0.47%*
Amean elapsed-7 7.61 ( 0.00%) 7.55 * 0.81%*
Amean elapsed-12 4.79 ( 0.00%) 4.80 ( -0.17%)
Amean elapsed-21 3.13 ( 0.00%) 2.89 * 7.74%*
Amean elapsed-30 3.65 ( 0.00%) 2.27 * 37.62%*
Amean elapsed-48 3.08 ( 0.00%) 2.13 * 30.69%*
Amean elapsed-79 2.00 ( 0.00%) 1.90 * 4.95%*
Amean elapsed-80 2.00 ( 0.00%) 1.90 * 4.70%*
This is showing the time to fault regions belonging to threads. The target
machine has 80 logical CPUs and two nodes. Note the ~30% gain when the
machine is approximately the point where one node becomes fully utilised.
The slower results are borderline noise.
Kernel building shows similar benefits around the same balance point.
Generally performance was either neutral or better in the tests conducted.
The main consideration with this patch is the point where fork stops
spreading a task so some workloads may benefit from different balance
points but it would be a risky tuning parameter.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20201120090630.3286-5-mgorman@techsingularity.net
Currently, an imbalance is only allowed when a destination node
is almost completely idle. This solved one basic class of problems
and was the cautious approach.
This patch revisits the possibility that NUMA nodes can be imbalanced
until 25% of the CPUs are occupied. The reasoning behind 25% is somewhat
superficial -- it's half the cores when HT is enabled. At higher
utilisations, balancing should continue as normal and keep things even
until scheduler domains are fully busy or over utilised.
Note that this is not expected to be a universal win. Any benchmark
that prefers spreading as wide as possible with limited communication
will favour the old behaviour as there is more memory bandwidth.
Workloads that communicate heavily in pairs such as netperf or tbench
benefit. For the tests I ran, the vast majority of workloads saw
a benefit so it seems to be a worthwhile trade-off.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20201120090630.3286-4-mgorman@techsingularity.net
In find_idlest_group(), the load imbalance is only relevant when the group
is either overloaded or fully busy but it is calculated unconditionally.
This patch moves the imbalance calculation to the context it is required.
Technically, it is a micro-optimisation but really the benefit is avoiding
confusing one type of imbalance with another depending on the group_type
in the next patch.
No functional change.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20201120090630.3286-3-mgorman@techsingularity.net
This is simply a preparation patch to make the following patches easier
to read. No functional change.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20201120090630.3286-2-mgorman@techsingularity.net
We call arch_cpu_idle() with RCU disabled, but then use
local_irq_{en,dis}able(), which invokes tracing, which relies on RCU.
Switch all arch_cpu_idle() implementations to use
raw_local_irq_{en,dis}able() and carefully manage the
lockdep,rcu,tracing state like we do in entry.
(XXX: we really should change arch_cpu_idle() to not return with
interrupts enabled)
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lkml.kernel.org/r/20201120114925.594122626@infradead.org
Instead of storing the map per CPU provide and use per task storage. That
prepares for local kmaps which are preemptible.
The context switch code is preparatory and not yet in use because
kmap_atomic() runs with preemption disabled. Will be made usable in the
next step.
The context switch logic is safe even when an interrupt happens after
clearing or before restoring the kmaps. The kmap index in task struct is
not modified so any nesting kmap in an interrupt will use unused indices
and on return the counter is the same as before.
Also add an assert into the return to user space code. Going back to user
space with an active kmap local is a nono.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20201118204007.372935758@linutronix.de
Now that the scheduler can deal with migrate disable properly, there is no
real compelling reason to make it only available for RT.
There are quite some code pathes which needlessly disable preemption in
order to prevent migration and some constructs like kmap_atomic() enforce
it implicitly.
Making it available independent of RT allows to provide a preemptible
variant of kmap_atomic() and makes the code more consistent in general.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Grudgingly-Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20201118204007.269943012@linutronix.de
- Make the conditional update of the overutilized state work correctly by
caching the relevant flags state before overwriting them and checking
them afterwards.
- Fix a data race in the wakeup path which caused loadavg on ARM64
platforms to become a random number generator.
- Fix the ordering of the iowaiter accounting operations so it can't be
decremented before it is incremented.
- Fix a bug in the deadline scheduler vs. priority inheritance when a
non-deadline task A has inherited the parameters of a deadline task B
and then blocks on a non-deadline task C.
The second inheritance step used the static deadline parameters of task
A, which are usually 0, instead of further propagating task B's
parameters. The zero initialized parameters trigger a bug in the
deadline scheduler.
-----BEGIN PGP SIGNATURE-----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=HiGq
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"A couple of scheduler fixes:
- Make the conditional update of the overutilized state work
correctly by caching the relevant flags state before overwriting
them and checking them afterwards.
- Fix a data race in the wakeup path which caused loadavg on ARM64
platforms to become a random number generator.
- Fix the ordering of the iowaiter accounting operations so it can't
be decremented before it is incremented.
- Fix a bug in the deadline scheduler vs. priority inheritance when a
non-deadline task A has inherited the parameters of a deadline task
B and then blocks on a non-deadline task C.
The second inheritance step used the static deadline parameters of
task A, which are usually 0, instead of further propagating task
B's parameters. The zero initialized parameters trigger a bug in
the deadline scheduler"
* tag 'sched-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Fix priority inheritance with multiple scheduling classes
sched: Fix rq->nr_iowait ordering
sched: Fix data-race in wakeup
sched/fair: Fix overutilized update in enqueue_task_fair()
In order to make accurate predictions across CPUs and for all performance
states, Energy Aware Scheduling (EAS) needs frequency-invariant load
tracking signals.
EAS task placement aims to minimize energy consumption, and does so in
part by limiting the search space to only CPUs with the highest spare
capacity (CPU capacity - CPU utilization) in their performance domain.
Those candidates are the placement choices that will keep frequency at
its lowest possible and therefore save the most energy.
But without frequency invariance, a CPU's utilization is relative to the
CPU's current performance level, and not relative to its maximum
performance level, which determines its capacity. As a result, it will
fail to correctly indicate any potential spare capacity obtained by an
increase in a CPU's performance level. Therefore, a non-invariant
utilization signal would render the EAS task placement logic invalid.
Now that we properly report support for the Frequency Invariance Engine
(FIE) through arch_scale_freq_invariant() for arm and arm64 systems,
while also ensuring a re-evaluation of the EAS use conditions for
possible invariance status change, we can assert this is the case when
initializing EAS. Warn and bail out otherwise.
Suggested-by: Quentin Perret <qperret@google.com>
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201027180713.7642-4-ionela.voinescu@arm.com
Add the rebuild_sched_domains_energy() function to wrap the functionality
that rebuilds the scheduling domains if any of the Energy Aware Scheduling
(EAS) initialisation conditions change. This functionality is used when
schedutil is added or removed or when EAS is enabled or disabled
through the sched_energy_aware sysctl.
Therefore, create a single function that is used in both these cases and
that can be later reused.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Quentin Perret <qperret@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20201027180713.7642-2-ionela.voinescu@arm.com
In case the user wants to stop controlling a uclamp constraint value
for a task, use the magic value -1 in sched_util_{min,max} with the
appropriate sched_flags (SCHED_FLAG_UTIL_CLAMP_{MIN,MAX}) to indicate
the reset.
The advantage over the 'additional flag' approach (i.e. introducing
SCHED_FLAG_UTIL_CLAMP_RESET) is that no additional flag has to be
exported via uapi. This avoids the need to document how this new flag
has be used in conjunction with the existing uclamp related flags.
The following subtle issue is fixed as well. When a uclamp constraint
value is set on a !user_defined uclamp_se it is currently first reset
and then set.
Fix this by AND'ing !user_defined with !SCHED_FLAG_UTIL_CLAMP which
stands for the 'sched class change' case.
The related condition 'if (uc_se->user_defined)' moved from
__setscheduler_uclamp() into uclamp_reset().
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Yun Hsiang <hsiang023167@gmail.com>
Link: https://lkml.kernel.org/r/20201113113454.25868-1-dietmar.eggemann@arm.com
NUMA topologies where the shortest path between some two nodes requires
three or more hops (i.e. diameter > 2) end up being misrepresented in the
scheduler topology structures.
This is currently detected when booting a kernel with CONFIG_SCHED_DEBUG=y
+ sched_debug on the cmdline, although this will only yield a warning about
sched_group spans not matching sched_domain spans:
ERROR: groups don't span domain->span
Add an explicit warning for that case, triggered regardless of
CONFIG_SCHED_DEBUG, and decorate it with an appropriate comment.
The topology described in the comment can be booted up on QEMU by appending
the following to your usual QEMU incantation:
-smp cores=4 \
-numa node,cpus=0,nodeid=0 -numa node,cpus=1,nodeid=1, \
-numa node,cpus=2,nodeid=2, -numa node,cpus=3,nodeid=3, \
-numa dist,src=0,dst=1,val=20, -numa dist,src=0,dst=2,val=30, \
-numa dist,src=0,dst=3,val=40, -numa dist,src=1,dst=2,val=20, \
-numa dist,src=1,dst=3,val=30, -numa dist,src=2,dst=3,val=20
A somewhat more realistic topology (6-node mesh) with the same affliction
can be conjured with:
-smp cores=6 \
-numa node,cpus=0,nodeid=0 -numa node,cpus=1,nodeid=1, \
-numa node,cpus=2,nodeid=2, -numa node,cpus=3,nodeid=3, \
-numa node,cpus=4,nodeid=4, -numa node,cpus=5,nodeid=5, \
-numa dist,src=0,dst=1,val=20, -numa dist,src=0,dst=2,val=30, \
-numa dist,src=0,dst=3,val=40, -numa dist,src=0,dst=4,val=30, \
-numa dist,src=0,dst=5,val=20, \
-numa dist,src=1,dst=2,val=20, -numa dist,src=1,dst=3,val=30, \
-numa dist,src=1,dst=4,val=20, -numa dist,src=1,dst=5,val=30, \
-numa dist,src=2,dst=3,val=20, -numa dist,src=2,dst=4,val=30, \
-numa dist,src=2,dst=5,val=40, \
-numa dist,src=3,dst=4,val=20, -numa dist,src=3,dst=5,val=30, \
-numa dist,src=4,dst=5,val=20
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/lkml/jhjtux5edo2.mognet@arm.com
Oleksandr reported hitting the WARN in the 'task_rq(p) != rq' branch
of migration_cpu_stop(). Valentin noted that using cpu_of(rq) in that
case is just plain wrong to begin with, since per the earlier branch
that isn't the actual CPU of the task.
Replace both instances of is_cpu_allowed() by a direct p->cpus_mask
test using task_cpu().
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Debugged-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Qian reported that some fuzzer issuing sched_setaffinity() ends up stuck on
a wait_for_completion(). The problematic pattern seems to be:
affine_move_task()
// task_running() case
stop_one_cpu();
wait_for_completion(&pending->done);
Combined with, on the stopper side:
migration_cpu_stop()
// Task moved between unlocks and scheduling the stopper
task_rq(p) != rq &&
// task_running() case
dest_cpu >= 0
=> no complete_all()
This can happen with both PREEMPT and !PREEMPT, although !PREEMPT should
be more likely to see this given the targeted task has a much bigger window
to block and be woken up elsewhere before the stopper runs.
Make migration_cpu_stop() always look at pending affinity requests; signal
their completion if the stopper hits a rq mismatch but the task is
still within its allowed mask. When Migrate-Disable isn't involved, this
matches the previous set_cpus_allowed_ptr() vs migration_cpu_stop()
behaviour.
Fixes: 6d337eab04 ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()")
Reported-by: Qian Cai <cai@redhat.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/8b62fd1ad1b18def27f18e2ee2df3ff5b36d0762.camel@redhat.com
schedule_user() was traditionally used by the entry code's tail to
preempt userspace after the call to user_enter(). Indeed the call to
user_enter() used to be performed upon syscall exit slow path which was
right before the last opportunity to schedule() while resuming to
userspace. The context tracking state had to be saved on the task stack
and set back to CONTEXT_KERNEL temporarily in order to safely switch to
another task.
Only a few archs use it now (namely sparc64 and powerpc64) and those
implementing HAVE_CONTEXT_TRACKING_OFFSTACK definetly can't rely on it.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201117151637.259084-5-frederic@kernel.org
Detect calls to schedule() between user_enter() and user_exit(). Those
are symptoms of early entry code that either forgot to protect a call
to schedule() inside exception_enter()/exception_exit() or, in the case
of HAVE_CONTEXT_TRACKING_OFFSTACK, enabled interrupts or preemption in
a wrong spot.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201117151637.259084-4-frederic@kernel.org
Glenn reported that "an application [he developed produces] a BUG in
deadline.c when a SCHED_DEADLINE task contends with CFS tasks on nested
PTHREAD_PRIO_INHERIT mutexes. I believe the bug is triggered when a CFS
task that was boosted by a SCHED_DEADLINE task boosts another CFS task
(nested priority inheritance).
------------[ cut here ]------------
kernel BUG at kernel/sched/deadline.c:1462!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 12 PID: 19171 Comm: dl_boost_bug Tainted: ...
Hardware name: ...
RIP: 0010:enqueue_task_dl+0x335/0x910
Code: ...
RSP: 0018:ffffc9000c2bbc68 EFLAGS: 00010002
RAX: 0000000000000009 RBX: ffff888c0af94c00 RCX: ffffffff81e12500
RDX: 000000000000002e RSI: ffff888c0af94c00 RDI: ffff888c10b22600
RBP: ffffc9000c2bbd08 R08: 0000000000000009 R09: 0000000000000078
R10: ffffffff81e12440 R11: ffffffff81e1236c R12: ffff888bc8932600
R13: ffff888c0af94eb8 R14: ffff888c10b22600 R15: ffff888bc8932600
FS: 00007fa58ac55700(0000) GS:ffff888c10b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa58b523230 CR3: 0000000bf44ab003 CR4: 00000000007606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
? intel_pstate_update_util_hwp+0x13/0x170
rt_mutex_setprio+0x1cc/0x4b0
task_blocks_on_rt_mutex+0x225/0x260
rt_spin_lock_slowlock_locked+0xab/0x2d0
rt_spin_lock_slowlock+0x50/0x80
hrtimer_grab_expiry_lock+0x20/0x30
hrtimer_cancel+0x13/0x30
do_nanosleep+0xa0/0x150
hrtimer_nanosleep+0xe1/0x230
? __hrtimer_init_sleeper+0x60/0x60
__x64_sys_nanosleep+0x8d/0xa0
do_syscall_64+0x4a/0x100
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7fa58b52330d
...
---[ end trace 0000000000000002 ]—
He also provided a simple reproducer creating the situation below:
So the execution order of locking steps are the following
(N1 and N2 are non-deadline tasks. D1 is a deadline task. M1 and M2
are mutexes that are enabled * with priority inheritance.)
Time moves forward as this timeline goes down:
N1 N2 D1
| | |
| | |
Lock(M1) | |
| | |
| Lock(M2) |
| | |
| | Lock(M2)
| | |
| Lock(M1) |
| (!!bug triggered!) |
Daniel reported a similar situation as well, by just letting ksoftirqd
run with DEADLINE (and eventually block on a mutex).
Problem is that boosted entities (Priority Inheritance) use static
DEADLINE parameters of the top priority waiter. However, there might be
cases where top waiter could be a non-DEADLINE entity that is currently
boosted by a DEADLINE entity from a different lock chain (i.e., nested
priority chains involving entities of non-DEADLINE classes). In this
case, top waiter static DEADLINE parameters could be null (initialized
to 0 at fork()) and replenish_dl_entity() would hit a BUG().
Fix this by keeping track of the original donor and using its parameters
when a task is boosted.
Reported-by: Glenn Elliott <glenn@aurora.tech>
Reported-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201117061432.517340-1-juri.lelli@redhat.com
schedule() ttwu()
deactivate_task(); if (p->on_rq && ...) // false
atomic_dec(&task_rq(p)->nr_iowait);
if (prev->in_iowait)
atomic_inc(&rq->nr_iowait);
Allows nr_iowait to be decremented before it gets incremented,
resulting in more dodgy IO-wait numbers than usual.
Note that because we can now do ttwu_queue_wakelist() before
p->on_cpu==0, we lose the natural ordering and have to further delay
the decrement.
Fixes: c6e7bd7afa ("sched/core: Optimize ttwu() spinning on p->on_cpu")
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lkml.kernel.org/r/20201117093829.GD3121429@hirez.programming.kicks-ass.net
enqueue_task_fair() attempts to skip the overutilized update for new
tasks as their util_avg is not accurate yet. However, the flag we check
to do so is overwritten earlier on in the function, which makes the
condition pretty much a nop.
Fix this by saving the flag early on.
Fixes: 2802bf3cd9 ("sched/fair: Add over-utilization/tipping point indicator")
Reported-by: Rick Yiu <rickyiu@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20201112111201.2081902-1-qperret@google.com
- Address a load balancer regression by making the load balancer use the
same logic as the wakeup path to spread tasks in the LLC domain.
- Prefer the CPU on which a task run last over the local CPU in the fast
wakeup path for asymmetric CPU capacity systems to align with the
symmetric case. This ensures more locality and prevents massive
migration overhead on those asymetric systems
- Fix a memory corruption bug in the scheduler debug code caused by
handing a modified buffer pointer to kfree().
-----BEGIN PGP SIGNATURE-----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=wFcU
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"A set of scheduler fixes:
- Address a load balancer regression by making the load balancer use
the same logic as the wakeup path to spread tasks in the LLC domain
- Prefer the CPU on which a task run last over the local CPU in the
fast wakeup path for asymmetric CPU capacity systems to align with
the symmetric case. This ensures more locality and prevents massive
migration overhead on those asymetric systems
- Fix a memory corruption bug in the scheduler debug code caused by
handing a modified buffer pointer to kfree()"
* tag 'sched-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/debug: Fix memory corruption caused by multiple small reads of flags
sched/fair: Prefer prev cpu in asymmetric wakeup path
sched/fair: Ensure tasks spreading in LLC during LB
This allows an exclusive wait_queue_entry to be added at the head of the
queue, instead of the tail as normal. Thus, it gets to consume events
first without allowing non-exclusive waiters to be woken at all.
The (first) intended use is for KVM IRQFD, which currently has
inconsistent behaviour depending on whether posted interrupts are
available or not. If they are, KVM will bypass the eventfd completely
and deliver interrupts directly to the appropriate vCPU. If not, events
are delivered through the eventfd and userspace will receive them when
polling on the eventfd.
By using add_wait_queue_priority(), KVM will be able to consistently
consume events within the kernel without accidentally exposing them
to userspace when they're supposed to be bypassed. This, in turn, means
that userspace doesn't have to jump through hoops to avoid listening
on the erroneously noisy eventfd and injecting duplicate interrupts.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20201027143944.648769-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CFS wakeup code will only ever go through EAS / its fast path on
"regular" wakeups (i.e. not on forks or execs). These are currently gated
by a check against 'sd_flag', which would be SD_BALANCE_WAKE at wakeup.
However, we now have a flag that explicitly tells us whether a wakeup is a
"regular" one, so hinge those conditions on that flag instead.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201102184514.2733-4-valentin.schneider@arm.com
Only select_task_rq_fair() uses that parameter to do an actual domain
search, other classes only care about what kind of wakeup is happening
(fork, exec, or "regular") and thus just translate the flag into a wakeup
type.
WF_TTWU and WF_EXEC have just been added, use these along with WF_FORK to
encode the wakeup types we care about. For select_task_rq_fair(), we can
simply use the shiny new WF_flag : SD_flag mapping.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201102184514.2733-3-valentin.schneider@arm.com
To remove the sd_flag parameter of select_task_rq(), we need another way of
encoding wakeup types. There already is a WF_FORK flag, add the missing two.
With that said, we still need an easy way to turn WF_foo into
SD_bar (e.g. WF_TTWU into SD_BALANCE_WAKE). As suggested by Peter, let's
make our lives easier and make them match exactly, and throw in some
compile-time checks for good measure.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201102184514.2733-2-valentin.schneider@arm.com
Since ab93a4bc95 ("sched/fair: Remove distribute_running fromCFS
bandwidth"), there is nothing to protect between
raw_spin_lock_irqsave/store() in do_sched_cfs_slack_timer().
Signed-off-by: Hui Su <sh_def@163.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Ben Segall <bsegall@google.com>
Link: https://lkml.kernel.org/r/20201030144621.GA96974@rlk
In order to minimize the interference of migrate_disable() on lower
priority tasks, which can be deprived of runtime due to being stuck
below a higher priority task. Teach the RT/DL balancers to push away
these higher priority tasks when a lower priority task gets selected
to run on a freshly demoted CPU (pull).
This adds migration interference to the higher priority task, but
restores bandwidth to system that would otherwise be irrevocably lost.
Without this it would be possible to have all tasks on the system
stuck on a single CPU, each task preempted in a migrate_disable()
section with a single high priority task running.
This way we can still approximate running the M highest priority tasks
on the system.
Migrating the top task away is (ofcourse) still subject to
migrate_disable() too, which means the lower task is subject to an
interference equivalent to the worst case migrate_disable() section.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102347.499155098@infradead.org
There's a valid ->pi_lock recursion issue where the actual PI code
tries to wake up the stop task. Make lockdep aware so it doesn't
complain about this.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102347.406912197@infradead.org
We want migrate_disable() tasks to get PULLs in order for them to PUSH
away the higher priority task.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102347.310519774@infradead.org
Replace a bunch of cpumask_any*() instances with
cpumask_any*_distribute(), by injecting this little bit of random in
cpu selection, we reduce the chance two competing balance operations
working off the same lowest_mask pick the same CPU.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102347.190759694@infradead.org
On CPU unplug tasks which are in a migrate disabled region cannot be pushed
to a different CPU until they returned to migrateable state.
Account the number of tasks on a runqueue which are in a migrate disabled
section and make the hotplug wait mechanism respect that.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102347.067278757@infradead.org
Concurrent migrate_disable() and set_cpus_allowed_ptr() has
interesting features. We rely on set_cpus_allowed_ptr() to not return
until the task runs inside the provided mask. This expectation is
exported to userspace.
This means that any set_cpus_allowed_ptr() caller must wait until
migrate_enable() allows migrations.
At the same time, we don't want migrate_enable() to schedule, due to
patterns like:
preempt_disable();
migrate_disable();
...
migrate_enable();
preempt_enable();
And:
raw_spin_lock(&B);
spin_unlock(&A);
this means that when migrate_enable() must restore the affinity
mask, it cannot wait for completion thereof. Luck will have it that
that is exactly the case where there is a pending
set_cpus_allowed_ptr(), so let that provide storage for the async stop
machine.
Much thanks to Valentin who used TLA+ most effective and found lots of
'interesting' cases.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102346.921768277@infradead.org
Add the base migrate_disable() support (under protest).
While migrate_disable() is (currently) required for PREEMPT_RT, it is
also one of the biggest flaws in the system.
Notably this is just the base implementation, it is broken vs
sched_setaffinity() and hotplug, both solved in additional patches for
ease of review.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102346.818170844@infradead.org
Thread a u32 flags word through the *set_cpus_allowed*() callchain.
This will allow adding behavioural tweaks for future users.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102346.729082820@infradead.org
Since we now migrate tasks away before DYING, we should also move
bandwidth unthrottle, otherwise we can gain tasks from unthrottle
after we expect all tasks to be gone already.
Also; it looks like the RT balancers don't respect cpu_active() and
instead rely on rq->online in part, complete this. This too requires
we do set_rq_offline() earlier to match the cpu_active() semantics.
(The bigger patch is to convert RT to cpu_active() entirely)
Since set_rq_online() is called from sched_cpu_activate(), place
set_rq_offline() in sched_cpu_deactivate().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102346.639538965@infradead.org
With the new mechanism which kicks tasks off the outgoing CPU at the end of
schedule() the situation on an outgoing CPU right before the stopper thread
brings it down completely is:
- All user tasks and all unbound kernel threads have either been migrated
away or are not running and the next wakeup will move them to a online CPU.
- All per CPU kernel threads, except cpu hotplug thread and the stopper
thread have either been unbound or parked by the responsible CPU hotplug
callback.
That means that at the last step before the stopper thread is invoked the
cpu hotplug thread is the last legitimate running task on the outgoing
CPU.
Add a final wait step right before the stopper thread is kicked which
ensures that any still running tasks on the way to park or on the way to
kick themself of the CPU are either sleeping or gone.
This allows to remove the migrate_tasks() crutch in sched_cpu_dying(). If
sched_cpu_dying() detects that there is still another running task aside of
the stopper thread then it will explode with the appropriate fireworks.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102346.547163969@infradead.org
RT kernels need to ensure that all tasks which are not per CPU kthreads
have left the outgoing CPU to guarantee that no tasks are force migrated
within a migrate disabled section.
There is also some desire to (ab)use fine grained CPU hotplug control to
clear a CPU from active state to force migrate tasks which are not per CPU
kthreads away for power control purposes.
Add a mechanism which waits until all tasks which should leave the CPU
after the CPU active flag is cleared have moved to a different online CPU.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102346.377836842@infradead.org
In preparation for migrate_disable(), make sure only per-cpu kthreads
are allowed to run on !active CPUs.
This is ran (as one of the very first steps) from the cpu-hotplug
task which is a per-cpu kthread and completion of the hotplug
operation only requires such tasks.
This constraint enables the migrate_disable() implementation to wait
for completion of all migrate_disable regions on this CPU at hotplug
time without fear of any new ones starting.
This replaces the unlikely(rq->balance_callbacks) test at the tail of
context_switch with an unlikely(rq->balance_work), the fast path is
not affected.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102346.292709163@infradead.org
The intent of balance_callback() has always been to delay executing
balancing operations until the end of the current rq->lock section.
This is because balance operations must often drop rq->lock, and that
isn't safe in general.
However, as noted by Scott, there were a few holes in that scheme;
balance_callback() was called after rq->lock was dropped, which means
another CPU can interleave and touch the callback list.
Rework code to call the balance callbacks before dropping rq->lock
where possible, and otherwise splice the balance list onto a local
stack.
This guarantees that the balance list must be empty when we take
rq->lock. IOW, we'll only ever run our own balance callbacks.
Reported-by: Scott Wood <swood@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102346.203901269@infradead.org
Crashes in stop-machine are hard to connect to the calling code, add a
little something to help with that.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102346.116513635@infradead.org
Reading /proc/sys/kernel/sched_domain/cpu*/domain0/flags mutliple times
with small reads causes oopses with slub corruption issues because the kfree is
free'ing an offset from a previous allocation. Fix this by adding in a new
pointer 'buf' for the allocation and kfree and use the temporary pointer tmp
to handle memory copies of the buf offsets.
Fixes: 5b9f8ff7b3 ("sched/debug: Output SD flag names rather than their values")
Reported-by: Jeff Bastian <jbastian@redhat.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20201029151103.373410-1-colin.king@canonical.com
During fast wakeup path, scheduler always check whether local or prev
cpus are good candidates for the task before looking for other cpus in
the domain. With commit b7a331615d ("sched/fair: Add asymmetric CPU
capacity wakeup scan") the heterogenous system gains a dedicated path
but doesn't try to reuse prev cpu whenever possible. If the previous
cpu is idle and belong to the LLC domain, we should check it 1st
before looking for another cpu because it stays one of the best
candidate and this also stabilizes task placement on the system.
This change aligns asymmetric path behavior with symmetric one and reduces
cases where the task migrates across all cpus of the sd_asym_cpucapacity
domains at wakeup.
This change does not impact normal EAS mode but only the overloaded case or
when EAS is not used.
- On hikey960 with performance governor (EAS disable)
./perf bench sched pipe -T -l 50000
mainline w/ patch
# migrations 999364 0
ops/sec 149313(+/-0.28%) 182587(+/- 0.40) +22%
- On hikey with performance governor
./perf bench sched pipe -T -l 50000
mainline w/ patch
# migrations 0 0
ops/sec 47721(+/-0.76%) 47899(+/- 0.56) +0.4%
According to test on hikey, the patch doesn't impact symmetric system
compared to current implementation (only tested on arm64)
Also read the uclamped value of task's utilization at most twice instead
instead each time we compare task's utilization with cpu's capacity.
Fixes: b7a331615d ("sched/fair: Add asymmetric CPU capacity wakeup scan")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20201029161824.26389-1-vincent.guittot@linaro.org
schbench shows latency increase for 95 percentile above since:
commit 0b0695f2b3 ("sched/fair: Rework load_balance()")
Align the behavior of the load balancer with the wake up path, which tries
to select an idle CPU which belongs to the LLC for a waking task.
calculate_imbalance() will use nr_running instead of the spare
capacity when CPUs share resources (ie cache) at the domain level. This
will ensure a better spread of tasks on idle CPUs.
Running schbench on a hikey (8cores arm64) shows the problem:
tip/sched/core :
schbench -m 2 -t 4 -s 10000 -c 1000000 -r 10
Latency percentiles (usec)
50.0th: 33
75.0th: 45
90.0th: 51
95.0th: 4152
*99.0th: 14288
99.5th: 14288
99.9th: 14288
min=0, max=14276
tip/sched/core + patch :
schbench -m 2 -t 4 -s 10000 -c 1000000 -r 10
Latency percentiles (usec)
50.0th: 34
75.0th: 47
90.0th: 52
95.0th: 78
*99.0th: 94
99.5th: 94
99.9th: 94
min=0, max=94
Fixes: 0b0695f2b3 ("sched/fair: Rework load_balance()")
Reported-by: Chris Mason <clm@fb.com>
Suggested-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Tested-by: Rik van Riel <riel@surriel.com>
Link: https://lkml.kernel.org/r/20201102102457.28808-1-vincent.guittot@linaro.org
A new cpufreq governor flag will be added subsequently, so replace
the bool dynamic_switching fleid in struct cpufreq_governor with a
flags field and introduce CPUFREQ_GOV_DYNAMIC_SWITCHING to set for
the "dynamic switching" governors instead of it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
As commit:
39f23ce07b ("sched/fair: Fix unthrottle_cfs_rq() for leaf_cfs_rq list")
does in unthrottle_cfs_rq(), throttle_cfs_rq() can also use the same
pattern as dequeue_task_fair().
No functional changes.
Signed-off-by: Peng Wang <rocking@linux.alibaba.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Phil Auld <pauld@redhat.com>
Cc: Ben Segall <bsegall@google.com>
Link: https://lore.kernel.org/r/f11dd2e3ab35cc538e2eb57bf0c99b6eaffce127.1604973978.git.rocking@linux.alibaba.com
The cpufreq policy's frequency limits (min/max) can get changed at any
point of time, while schedutil is trying to update the next frequency.
Though the schedutil governor has necessary locking and support in place
to make sure we don't miss any of those updates, there is a corner case
where the governor will find that the CPU is already running at the
desired frequency and so may skip an update.
For example, consider that the CPU can run at 1 GHz, 1.2 GHz and 1.4 GHz
and is running at 1 GHz currently. Schedutil tries to update the
frequency to 1.2 GHz, during this time the policy limits get changed as
policy->min = 1.4 GHz. As schedutil (and cpufreq core) does clamp the
frequency at various instances, we will eventually set the frequency to
1.4 GHz, while we will save 1.2 GHz in sg_policy->next_freq.
Now lets say the policy limits get changed back at this time with
policy->min as 1 GHz. The next time schedutil is invoked by the
scheduler, we will reevaluate the next frequency (because
need_freq_update will get set due to limits change event) and lets say
we want to set the frequency to 1.2 GHz again. At this point
sugov_update_next_freq() will find the next_freq == current_freq and
will abort the update, while the CPU actually runs at 1.4 GHz.
Until now need_freq_update was used as a flag to indicate that the
policy's frequency limits have changed, and that we should consider the
new limits while reevaluating the next frequency.
This patch fixes the above mentioned issue by extending the purpose of
the need_freq_update flag. If this flag is set now, the schedutil
governor will not try to abort a frequency change even if next_freq ==
current_freq.
As similar behavior is required in the case of
CPUFREQ_NEED_UPDATE_LIMITS flag as well, need_freq_update will never be
set to false if that flag is set for the driver.
We also don't need to consider the need_freq_update flag in
sugov_update_single() anymore to handle the special case of busy CPU, as
we won't abort a frequency update anymore.
Reported-by: zhuguangqing <zhuguangqing@xiaomi.com>
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Rearrange code to avoid a branch ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Because sugov_update_next_freq() may skip a frequency update even if
the need_freq_update flag has been set for the policy at hand, policy
limits updates may not take effect as expected.
For example, if the intel_pstate driver operates in the passive mode
with HWP enabled, it needs to update the HWP min and max limits when
the policy min and max limits change, respectively, but that may not
happen if the target frequency does not change along with the limit
at hand. In particular, if the policy min is changed first, causing
the target frequency to be adjusted to it, and the policy max limit
is changed later to the same value, the HWP max limit will not be
updated to follow it as expected, because the target frequency is
still equal to the policy min limit and it will not change until
that limit is updated.
To address this issue, modify get_next_freq() to let the driver
callback run if the CPUFREQ_NEED_UPDATE_LIMITS cpufreq driver flag
is set regardless of whether or not the new frequency to set is
equal to the previous one.
Fixes: f6ebbcf08f ("cpufreq: intel_pstate: Implement passive mode with HWP enabled")
Reported-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+: 1c534352f4 cpufreq: Introduce CPUFREQ_NEED_UPDATE_LIMITS ...
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+: a62f68f5ca cpufreq: Introduce cpufreq_driver_test_flags()
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In the case of a thread wakeup, wake_affine determines whether a core
will be chosen for the thread on the socket where the thread ran
previously or on the socket of the waker. This is done primarily by
comparing the load of the core where th thread ran previously (prev)
and the load of the waker (this).
commit 11f10e5420 ("sched/fair: Use load instead of runnable load
in wakeup path") changed the load computation from the runnable load
to the load average, where the latter includes the load of threads
that have already blocked on the core.
When a short-running daemon processes happens to run on prev, this
change raised the situation that prev could appear to have a greater
load than this, even when prev is actually idle. When prev and this
are on the same socket, the idle prev is detected later, in
select_idle_sibling. But if that does not hold, prev is completely
ignored, causing the waking thread to move to the socket of the waker.
In the case of N mostly active threads on N cores, this triggers other
migrations and hurts performance.
In contrast, before commit 11f10e5420, the load on an idle core
was 0, and in the case of a non-idle waker core, the effect of
wake_affine was to select prev as the target for searching for a core
for the waking thread.
To avoid unnecessary migrations, extend wake_affine_idle to check
whether the core where the thread previously ran is currently idle,
and if so simply return that core as the target.
[1] commit 11f10e5420 ("sched/fair: Use load instead of runnable
load in wakeup path")
This particularly has an impact when using the ondemand power manager,
where kworkers run every 0.004 seconds on all cores, increasing the
likelihood that an idle core will be considered to have a load.
The following numbers were obtained with the benchmarking tool
hyperfine (https://github.com/sharkdp/hyperfine) on the NAS parallel
benchmarks (https://www.nas.nasa.gov/publications/npb.html). The
tests were run on an 80-core Intel(R) Xeon(R) CPU E7-8870 v4 @
2.10GHz. Active (intel_pstate) and passive (intel_cpufreq) power
management were used. Times are in seconds. All experiments use all
160 hardware threads.
v5.9/intel-pstate v5.9+patch/intel-pstate
bt.C.c 24.725724+-0.962340 23.349608+-1.607214
lu.C.x 29.105952+-4.804203 25.249052+-5.561617
sp.C.x 31.220696+-1.831335 30.227760+-2.429792
ua.C.x 26.606118+-1.767384 25.778367+-1.263850
v5.9/ondemand v5.9+patch/ondemand
bt.C.c 25.330360+-1.028316 23.544036+-1.020189
lu.C.x 35.872659+-4.872090 23.719295+-3.883848
sp.C.x 32.141310+-2.289541 29.125363+-0.872300
ua.C.x 29.024597+-1.667049 25.728888+-1.539772
On the smaller data sets (A and B) and on the other NAS benchmarks
there is no impact on performance.
This also has a major impact on the splash2x.volrend benchmark of the
parsec benchmark suite that goes from 1m25 without this patch to 0m45,
in active (intel_pstate) mode.
Fixes: 11f10e5420 ("sched/fair: Use load instead of runnable load in wakeup path")
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/1603372550-14680-1-git-send-email-Julia.Lawall@inria.fr
Florian reported that all of kernel/sched/ is rebuild when
CONFIG_BLK_DEV_INITRD is changed, which, while not a bug is
unexpected. This is due to us including vmlinux.lds.h.
Jakub explained that the problem is that we put the alignment
requirement on the type instead of on a variable. Type alignment is a
minimum, the compiler is free to pick any larger alignment for a
specific instance of the type (eg. the variable).
So force the type alignment on all individual variable definitions and
remove the undesired dependency on vmlinux.lds.h.
Fixes: 85c2ce9104 ("sched, vmlinux.lds: Increase STRUCT_ALIGNMENT to 64 bytes for GCC-4.9")
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Suggested-by: Jakub Jelinek <jakub@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
do_sched_yield() invokes schedule() with interrupts disabled which is
not allowed. This goes back to the pre git era to commit a6efb709806c
("[PATCH] irqlock patch 2.5.27-H6") in the history tree.
Reenable interrupts and remove the misleading comment which "explains" it.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/87r1pt7y5c.fsf@nanos.tec.linutronix.de
Document membarrier ordering scenarios in membarrier.c. Thanks to Alan
Stern for refreshing my memory. Now that I have those in mind, it seems
appropriate to serialize them to comments for posterity.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201020134715.13909-4-mathieu.desnoyers@efficios.com
Add comments and memory barrier to kthread_use_mm and kthread_unuse_mm
to allow the effect of membarrier(2) to apply to kthreads accessing
user-space memory as well.
Given that no prior kthread use this guarantee and that it only affects
kthreads, adding this guarantee does not affect user-space ABI.
Refine the check in membarrier_global_expedited to exclude runqueues
running the idle thread rather than all kthreads from the IPI cpumask.
Now that membarrier_global_expedited can IPI kthreads, the scheduler
also needs to update the runqueue's membarrier_state when entering lazy
TLB state.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201020134715.13909-3-mathieu.desnoyers@efficios.com
exit_mm should issue memory barriers after user-space memory accesses,
before clearing current->mm, to order user-space memory accesses
performed prior to exit_mm before clearing tsk->mm, which has the
effect of skipping the membarrier private expedited IPIs.
exit_mm should also update the runqueue's membarrier_state so
membarrier global expedited IPIs are not sent when they are not
needed.
The membarrier system call can be issued concurrently with do_exit
if we have thread groups created with CLONE_VM but not CLONE_THREAD.
Here is the scenario I have in mind:
Two thread groups are created, A and B. Thread group B is created by
issuing clone from group A with flag CLONE_VM set, but not CLONE_THREAD.
Let's assume we have a single thread within each thread group (Thread A
and Thread B).
The AFAIU we can have:
Userspace variables:
int x = 0, y = 0;
CPU 0 CPU 1
Thread A Thread B
(in thread group A) (in thread group B)
x = 1
barrier()
y = 1
exit()
exit_mm()
current->mm = NULL;
r1 = load y
membarrier()
skips CPU 0 (no IPI) because its current mm is NULL
r2 = load x
BUG_ON(r1 == 1 && r2 == 0)
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201020134715.13909-2-mathieu.desnoyers@efficios.com
It is possible for find_new_ilb() to select the current CPU, however,
this only happens from newidle balancing, in which case need_resched()
will be true, and consequently nohz_csd_func() will not trigger the
softirq.
Exclude the current CPU from becoming an ILB target.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Add CPUPRI_HIGHER above the RT99 priority to denote the CPU is in use
by higher priority tasks (specifically deadline).
XXX: we should probably drive PUSH-PULL from cpupri, that would
automagically result in an RT-PUSH when DL sets cpupri to CPUPRI_HIGHER.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
pri_to_cpu[CPUPRI_IDLE=0] isn't used since cpupri_set(..., newpri) is
never called with newpri = MAX_PRIO (140).
Current mapping:
p->rt_priority p->prio newpri cpupri
-1 -1 (CPUPRI_INVALID)
140 0 (CPUPRI_IDLE)
100 1 (CPUPRI_NORMAL)
1 98 98 3
...
49 50 50 51
50 49 49 52
...
99 0 0 101
Even when cpupri was introduced with commit 6e0534f278 ("sched: use a
2-d bitmap for searching lowest-pri CPU") in v2.6.27, only
(1) CPUPRI_INVALID (-1),
(2) MAX_RT_PRIO (100),
(3) an RT prio (RT1..RT99)
were used as newprio in cpupri_set(..., newpri) -> convert_prio(newpri).
MAX_RT_PRIO is used only in dec_rt_tasks() -> dec_rt_prio() ->
dec_rt_prio_smp() -> cpupri_set() in case of !rt_rq->rt_nr_running.
I.e. it stands for a non-rt task, including the IDLE task.
Commit 57785df5ac ("sched: Fix task priority bug") removed code in
v2.6.33 which did set the priority of the IDLE task to MAX_PRIO.
Although this happened after the introduction of cpupri, it didn't have
an effect on the values used for cpupri_set(..., newpri).
Remove CPUPRI_IDLE and adapt the cpupri implementation accordingly.
This will save a useless for loop with an atomic_read in
cpupri_find_fitness() calling __cpupri_find().
New mapping:
p->rt_priority p->prio newpri cpupri
-1 -1 (CPUPRI_INVALID)
100 0 (CPUPRI_NORMAL)
1 98 98 2
...
49 50 50 50
50 49 49 51
...
99 0 0 100
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200922083934.19275-2-dietmar.eggemann@arm.com
When change sched_rt_{runtime, period}_us, we validate that the new
settings should at least accommodate the currently allocated -dl
bandwidth:
sched_rt_handler()
--> sched_dl_bandwidth_validate()
{
new_bw = global_rt_runtime()/global_rt_period();
for_each_possible_cpu(cpu) {
dl_b = dl_bw_of(cpu);
if (new_bw < dl_b->total_bw) <-------
ret = -EBUSY;
}
}
But under CONFIG_SMP, dl_bw is per root domain , but not per CPU,
dl_b->total_bw is the allocated bandwidth of the whole root domain.
Instead, we should compare dl_b->total_bw against "cpus*new_bw",
where 'cpus' is the number of CPUs of the root domain.
Also, below annotation(in kernel/sched/sched.h) implied implementation
only appeared in SCHED_DEADLINE v2[1], then deadline scheduler kept
evolving till got merged(v9), but the annotation remains unchanged,
meaningless and misleading, update it.
* With respect to SMP, the bandwidth is given on a per-CPU basis,
* meaning that:
* - dl_bw (< 100%) is the bandwidth of the system (group) on each CPU;
* - dl_total_bw array contains, in the i-eth element, the currently
* allocated bandwidth on the i-eth CPU.
[1]: https://lore.kernel.org/lkml/1267385230.13676.101.camel@Palantir/
Fixes: 332ac17ef5 ("sched/deadline: Add bandwidth management for SCHED_DEADLINE tasks")
Signed-off-by: Peng Liu <iwtbavbm@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lkml.kernel.org/r/db6bbda316048cda7a1bbc9571defde193a8d67e.1602171061.git.iwtbavbm@gmail.com
Under CONFIG_SMP, dl_bw is per root domain, but not per CPU.
When checking or updating dl_bw, currently iterating every CPU is
overdoing, just need iterate each root domain once.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Peng Liu <iwtbavbm@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lkml.kernel.org/r/78d21ee792cc48ff79e8cd62a5f26208463684d6.1602171061.git.iwtbavbm@gmail.com
When the sched_schedstat changes from 0 to 1, some sched se maybe
already in the runqueue, the se->statistics.wait_start will be 0.
So it will let the (rq_of(cfs_rq)) - se->statistics.wait_start)
wrong. We need to avoid this scenario.
Signed-off-by: jun qian <qianjun.kernel@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lkml.kernel.org/r/20201015064846.19809-1-qianjun.kernel@gmail.com
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- A trivial build fix for sched_feat() to compile correctly with
CONFIG_JUMP_LABEL=n
- Replace a zero lenght array with a flexible array.
-----BEGIN PGP SIGNATURE-----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=RNOk
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"Two scheduler fixes:
- A trivial build fix for sched_feat() to compile correctly with
CONFIG_JUMP_LABEL=n
- Replace a zero lenght array with a flexible array"
* tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/features: Fix !CONFIG_JUMP_LABEL case
sched: Replace zero-length array with flexible-array
- Move the AVS drivers to new platform-specific locations and get
rid of the drivers/power/avs directory (Ulf Hansson).
- Add on/off notifiers and idle state accounting support to the
generic power domains (genpd) framework (Ulf Hansson, Lina Iyer).
- Ulf will maintain the PM domain part of cpuidle-psci (Ulf Hansson).
- Make intel_idle disregard ACPI _CST if it cannot use the data
returned by that method (Mel Gorman).
- Modify intel_pstate to avoid leaving useless sysfs directory
structure behind if it cannot be registered (Chen Yu).
- Fix domain detection in the RAPL power capping driver and prevent
it from failing to enumerate the Psys RAPL domain (Zhang Rui).
- Allow acpi-cpufreq to use ACPI _PSD information with Family 19 and
later AMD chips (Wei Huang).
- Update the driver assumptions comment in intel_idle and fix a
kerneldoc comment in the runtime PM framework (Alexander Monakov,
Bean Huo).
- Avoid unnecessary resets of the cached frequency in the schedutil
cpufreq governor to reduce overhead (Wei Wang).
- Clean up the cpufreq core a bit (Viresh Kumar).
- Make assorted minor janitorial changes (Daniel Lezcano, Geert
Uytterhoeven, Hubert Jasudowicz, Tom Rix).
- Clean up and optimize the cpupower utility somewhat (Colin Ian
King, Martin Kaistra).
-----BEGIN PGP SIGNATURE-----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=TFKg
-----END PGP SIGNATURE-----
Merge tag 'pm-5.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"First of all, the adaptive voltage scaling (AVS) drivers go to new
platform-specific locations as planned (this part was reported to have
merge conflicts against the new arm-soc updates in linux-next).
In addition to that, there are some fixes (intel_idle, intel_pstate,
RAPL, acpi_cpufreq), the addition of on/off notifiers and idle state
accounting support to the generic power domains (genpd) code and some
janitorial changes all over.
Specifics:
- Move the AVS drivers to new platform-specific locations and get rid
of the drivers/power/avs directory (Ulf Hansson).
- Add on/off notifiers and idle state accounting support to the
generic power domains (genpd) framework (Ulf Hansson, Lina Iyer).
- Ulf will maintain the PM domain part of cpuidle-psci (Ulf Hansson).
- Make intel_idle disregard ACPI _CST if it cannot use the data
returned by that method (Mel Gorman).
- Modify intel_pstate to avoid leaving useless sysfs directory
structure behind if it cannot be registered (Chen Yu).
- Fix domain detection in the RAPL power capping driver and prevent
it from failing to enumerate the Psys RAPL domain (Zhang Rui).
- Allow acpi-cpufreq to use ACPI _PSD information with Family 19 and
later AMD chips (Wei Huang).
- Update the driver assumptions comment in intel_idle and fix a
kerneldoc comment in the runtime PM framework (Alexander Monakov,
Bean Huo).
- Avoid unnecessary resets of the cached frequency in the schedutil
cpufreq governor to reduce overhead (Wei Wang).
- Clean up the cpufreq core a bit (Viresh Kumar).
- Make assorted minor janitorial changes (Daniel Lezcano, Geert
Uytterhoeven, Hubert Jasudowicz, Tom Rix).
- Clean up and optimize the cpupower utility somewhat (Colin Ian
King, Martin Kaistra)"
* tag 'pm-5.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
PM: sleep: remove unreachable break
PM: AVS: Drop the avs directory and the corresponding Kconfig
PM: AVS: qcom-cpr: Move the driver to the qcom specific drivers
PM: runtime: Fix typo in pm_runtime_set_active() helper comment
PM: domains: Fix build error for genpd notifiers
powercap: Fix typo in Kconfig "Plance" -> "Plane"
cpufreq: schedutil: restore cached freq when next_f is not changed
acpi-cpufreq: Honor _PSD table setting on new AMD CPUs
PM: AVS: smartreflex Move driver to soc specific drivers
PM: AVS: rockchip-io: Move the driver to the rockchip specific drivers
PM: domains: enable domain idle state accounting
PM: domains: Add curly braces to delimit comment + statement block
PM: domains: Add support for PM domain on/off notifiers for genpd
powercap/intel_rapl: enumerate Psys RAPL domain together with package RAPL domain
powercap/intel_rapl: Fix domain detection
intel_idle: Ignore _CST if control cannot be taken from the platform
cpuidle: Remove pointless stub
intel_idle: mention assumption that WBINVD is not needed
MAINTAINERS: Add section for cpuidle-psci PM domain
cpufreq: intel_pstate: Delete intel_pstate sysfs if failed to register the driver
...
We have the raw cached freq to reduce the chance in calling cpufreq
driver where it could be costly in some arch/SoC.
Currently, the raw cached freq is reset in sugov_update_single() when
it avoids frequency reduction (which is not desirable sometimes), but
it is better to restore the previous value of it in that case,
because it may not change in the next cycle and it is not necessary
to change the CPU frequency then.
Adapted from https://android-review.googlesource.com/1352810/
Signed-off-by: Wei Wang <wvw@google.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject edit and changelog rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A previous commit changed the notification mode from true/false to an
int, allowing notify-no, notify-yes, or signal-notify. This was
backwards compatible in the sense that any existing true/false user
would translate to either 0 (on notification sent) or 1, the latter
which mapped to TWA_RESUME. TWA_SIGNAL was assigned a value of 2.
Clean this up properly, and define a proper enum for the notification
mode. Now we have:
- TWA_NONE. This is 0, same as before the original change, meaning no
notification requested.
- TWA_RESUME. This is 1, same as before the original change, meaning
that we use TIF_NOTIFY_RESUME.
- TWA_SIGNAL. This uses TIF_SIGPENDING/JOBCTL_TASK_WORK for the
notification.
Clean up all the callers, switching their 0/1/false/true to using the
appropriate TWA_* mode for notifications.
Fixes: e91b481623 ("task_work: teach task_work_add() to do signal_wake_up()")
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit:
765cc3a4b2 ("sched/core: Optimize sched_feat() for !CONFIG_SCHED_DEBUG builds")
made sched features static for !CONFIG_SCHED_DEBUG configurations, but
overlooked the CONFIG_SCHED_DEBUG=y and !CONFIG_JUMP_LABEL cases.
For the latter echoing changes to /sys/kernel/debug/sched_features has
the nasty effect of effectively changing what sched_features reports,
but without actually changing the scheduler behaviour (since different
translation units get different sysctl_sched_features).
Fix CONFIG_SCHED_DEBUG=y and !CONFIG_JUMP_LABEL configurations by properly
restructuring ifdefs.
Fixes: 765cc3a4b2 ("sched/core: Optimize sched_feat() for !CONFIG_SCHED_DEBUG builds")
Co-developed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Patrick Bellasi <patrick.bellasi@matbug.net>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lore.kernel.org/r/20201013053114.160628-1-juri.lelli@redhat.com
In the following commit:
04f5c362ec: ("sched/fair: Replace zero-length array with flexible-array")
a zero-length array cpumask[0] has been replaced with cpumask[].
But there is still a cpumask[0] in 'struct sched_group_capacity'
which was missed.
The point of using [] instead of [0] is that with [] the compiler will
generate a build warning if it isn't the last member of a struct.
[ mingo: Rewrote the changelog. ]
Signed-off-by: zhuguangqing <zhuguangqing@xiaomi.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20201014140220.11384-1-zhuguangqing83@gmail.com
- Rework cpufreq statistics collection to allow it to take place
when fast frequency switching is enabled in the governor (Viresh
Kumar).
- Make the cpufreq core set the frequency scale on behalf of the
driver and update several cpufreq drivers accordingly (Ionela
Voinescu, Valentin Schneider).
- Add new hardware support to the STI and qcom cpufreq drivers and
improve them (Alain Volmat, Manivannan Sadhasivam).
- Fix multiple assorted issues in cpufreq drivers (Jon Hunter,
Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan
Gerhold, Viresh Kumar).
- Fix several assorted issues in the operating performance points
(OPP) framework (Stephan Gerhold, Viresh Kumar).
- Allow devfreq drivers to fetch devfreq instances by DT enumeration
instead of using explicit phandles and modify the devfreq core
code to support driver-specific devfreq DT bindings (Leonard
Crestez, Chanwoo Choi).
- Improve initial hardware resetting in the tegra30 devfreq driver
and clean up the tegra cpuidle driver (Dmitry Osipenko).
- Update the cpuidle core to collect state entry rejection
statistics and expose them via sysfs (Lina Iyer).
- Improve the ACPI _CST code handling diagnostics (Chen Yu).
- Update the PSCI cpuidle driver to allow the PM domain
initialization to occur in the OSI mode as well as in the PC
mode (Ulf Hansson).
- Rework the generic power domains (genpd) core code to allow
domain power off transition to be aborted in the absence of the
"power off" domain callback (Ulf Hansson).
- Fix two suspend-to-idle issues in the ACPI EC driver (Rafael
Wysocki).
- Fix the handling of timer_expires in the PM-runtime framework on
32-bit systems and the handling of device links in it (Grygorii
Strashko, Xiang Chen).
- Add IO requests batching support to the hibernate image saving and
reading code and drop a bogus get_gendisk() from there (Xiaoyi
Chen, Christoph Hellwig).
- Allow PCIe ports to be put into the D3cold power state if they
are power-manageable via ACPI (Lukas Wunner).
- Add missing header file include to a power capping driver (Pujin
Shi).
- Clean up the qcom-cpr AVS driver a bit (Liu Shixin).
- Kevin Hilman steps down as designated reviwer of adaptive voltage
scaling (AVS) driverrs (Kevin Hilman).
-----BEGIN PGP SIGNATURE-----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=rGhy
-----END PGP SIGNATURE-----
Merge tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These rework the collection of cpufreq statistics to allow it to take
place if fast frequency switching is enabled in the governor, rework
the frequency invariance handling in the cpufreq core and drivers, add
new hardware support to a couple of cpufreq drivers, fix a number of
assorted issues and clean up the code all over.
Specifics:
- Rework cpufreq statistics collection to allow it to take place when
fast frequency switching is enabled in the governor (Viresh Kumar).
- Make the cpufreq core set the frequency scale on behalf of the
driver and update several cpufreq drivers accordingly (Ionela
Voinescu, Valentin Schneider).
- Add new hardware support to the STI and qcom cpufreq drivers and
improve them (Alain Volmat, Manivannan Sadhasivam).
- Fix multiple assorted issues in cpufreq drivers (Jon Hunter,
Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan
Gerhold, Viresh Kumar).
- Fix several assorted issues in the operating performance points
(OPP) framework (Stephan Gerhold, Viresh Kumar).
- Allow devfreq drivers to fetch devfreq instances by DT enumeration
instead of using explicit phandles and modify the devfreq core code
to support driver-specific devfreq DT bindings (Leonard Crestez,
Chanwoo Choi).
- Improve initial hardware resetting in the tegra30 devfreq driver
and clean up the tegra cpuidle driver (Dmitry Osipenko).
- Update the cpuidle core to collect state entry rejection statistics
and expose them via sysfs (Lina Iyer).
- Improve the ACPI _CST code handling diagnostics (Chen Yu).
- Update the PSCI cpuidle driver to allow the PM domain
initialization to occur in the OSI mode as well as in the PC mode
(Ulf Hansson).
- Rework the generic power domains (genpd) core code to allow domain
power off transition to be aborted in the absence of the "power
off" domain callback (Ulf Hansson).
- Fix two suspend-to-idle issues in the ACPI EC driver (Rafael
Wysocki).
- Fix the handling of timer_expires in the PM-runtime framework on
32-bit systems and the handling of device links in it (Grygorii
Strashko, Xiang Chen).
- Add IO requests batching support to the hibernate image saving and
reading code and drop a bogus get_gendisk() from there (Xiaoyi
Chen, Christoph Hellwig).
- Allow PCIe ports to be put into the D3cold power state if they are
power-manageable via ACPI (Lukas Wunner).
- Add missing header file include to a power capping driver (Pujin
Shi).
- Clean up the qcom-cpr AVS driver a bit (Liu Shixin).
- Kevin Hilman steps down as designated reviwer of adaptive voltage
scaling (AVS) drivers (Kevin Hilman)"
* tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
cpufreq: stats: Fix string format specifier mismatch
arm: disable frequency invariance for CONFIG_BL_SWITCHER
cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale()
cpufreq: stats: Add memory barrier to store_reset()
cpufreq: schedutil: Simplify sugov_fast_switch()
ACPI: EC: PM: Drop ec_no_wakeup check from acpi_ec_dispatch_gpe()
ACPI: EC: PM: Flush EC work unconditionally after wakeup
PCI/ACPI: Whitelist hotplug ports for D3 if power managed by ACPI
PM: hibernate: remove the bogus call to get_gendisk() in software_resume()
cpufreq: Move traces and update to policy->cur to cpufreq core
cpufreq: stats: Enable stats for fast-switch as well
cpufreq: stats: Mark few conditionals with unlikely()
cpufreq: stats: Remove locking
cpufreq: stats: Defer stats update to cpufreq_stats_record_transition()
PM: domains: Allow to abort power off when no ->power_off() callback
PM: domains: Rename power state enums for genpd
PM / devfreq: tegra30: Improve initial hardware resetting
PM / devfreq: event: Change prototype of devfreq_event_get_edev_by_phandle function
PM / devfreq: Change prototype of devfreq_get_devfreq_by_phandle function
PM / devfreq: Add devfreq_get_devfreq_by_node function
...
- Reorganize & clean up the SD* flags definitions and add a bunch
of sanity checks. These new checks caught quite a few bugs or at
least inconsistencies, resulting in another set of patches.
- Rseq updates, add MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ
- Add a new tracepoint to improve CPU capacity tracking
- Improve overloaded SMP system load-balancing behavior
- Tweak SMT balancing
- Energy-aware scheduling updates
- NUMA balancing improvements
- Deadline scheduler fixes and improvements
- CPU isolation fixes
- Misc cleanups, simplifications and smaller optimizations.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bXy6
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- reorganize & clean up the SD* flags definitions and add a bunch of
sanity checks. These new checks caught quite a few bugs or at least
inconsistencies, resulting in another set of patches.
- rseq updates, add MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ
- add a new tracepoint to improve CPU capacity tracking
- improve overloaded SMP system load-balancing behavior
- tweak SMT balancing
- energy-aware scheduling updates
- NUMA balancing improvements
- deadline scheduler fixes and improvements
- CPU isolation fixes
- misc cleanups, simplifications and smaller optimizations
* tag 'sched-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
sched/deadline: Unthrottle PI boosted threads while enqueuing
sched/debug: Add new tracepoint to track cpu_capacity
sched/fair: Tweak pick_next_entity()
rseq/selftests: Test MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ
rseq/selftests,x86_64: Add rseq_offset_deref_addv()
rseq/membarrier: Add MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ
sched/fair: Use dst group while checking imbalance for NUMA balancer
sched/fair: Reduce busy load balance interval
sched/fair: Minimize concurrent LBs between domain level
sched/fair: Reduce minimal imbalance threshold
sched/fair: Relax constraint on task's load during load balance
sched/fair: Remove the force parameter of update_tg_load_avg()
sched/fair: Fix wrong cpu selecting from isolated domain
sched: Remove unused inline function uclamp_bucket_base_value()
sched/rt: Disable RT_RUNTIME_SHARE by default
sched/deadline: Fix stale throttling on de-/boosted tasks
sched/numa: Use runnable_avg to classify node
sched/topology: Move sd_flag_debug out of #ifdef CONFIG_SYSCTL
MAINTAINERS: Add myself as SCHED_DEADLINE reviewer
sched/topology: Move SD_DEGENERATE_GROUPS_MASK out of linux/sched/topology.h
...
Drop a redundant local variable definition from sugov_fast_switch()
and rearrange the code in there to avoid the redundant logical
negation.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
The cpufreq core handles the updates to policy->cur and recording of
cpufreq trace events for all the governors except schedutil's fast
switch case.
Move that as well to cpufreq core for consistency and readability.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
stress-ng has a test (stress-ng --cyclic) that creates a set of threads
under SCHED_DEADLINE with the following parameters:
dl_runtime = 10000 (10 us)
dl_deadline = 100000 (100 us)
dl_period = 100000 (100 us)
These parameters are very aggressive. When using a system without HRTICK
set, these threads can easily execute longer than the dl_runtime because
the throttling happens with 1/HZ resolution.
During the main part of the test, the system works just fine because
the workload does not try to run over the 10 us. The problem happens at
the end of the test, on the exit() path. During exit(), the threads need
to do some cleanups that require real-time mutex locks, mainly those
related to memory management, resulting in this scenario:
Note: locks are rt_mutexes...
------------------------------------------------------------------------
TASK A: TASK B: TASK C:
activation
activation
activation
lock(a): OK! lock(b): OK!
<overrun runtime>
lock(a)
-> block (task A owns it)
-> self notice/set throttled
+--< -> arm replenished timer
| switch-out
| lock(b)
| -> <C prio > B prio>
| -> boost TASK B
| unlock(a) switch-out
| -> handle lock a to B
| -> wakeup(B)
| -> B is throttled:
| -> do not enqueue
| switch-out
|
|
+---------------------> replenishment timer
-> TASK B is boosted:
-> do not enqueue
------------------------------------------------------------------------
BOOM: TASK B is runnable but !enqueued, holding TASK C: the system
crashes with hung task C.
This problem is avoided by removing the throttle state from the boosted
thread while boosting it (by TASK A in the example above), allowing it to
be queued and run boosted.
The next replenishment will take care of the runtime overrun, pushing
the deadline further away. See the "while (dl_se->runtime <= 0)" on
replenish_dl_entity() for more information.
Reported-by: Mark Simmons <msimmons@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Tested-by: Mark Simmons <msimmons@redhat.com>
Link: https://lkml.kernel.org/r/5076e003450835ec74e6fa5917d02c4fa41687e6.1600170294.git.bristot@redhat.com
rq->cpu_capacity is a key element in several scheduler parts, such as EAS
task placement and load balancing. Tracking this value enables testing
and/or debugging by a toolkit.
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1598605249-72651-1-git-send-email-vincent.donnefort@arm.com
Currently, pick_next_entity(...) has the following structure
(simplified):
[...]
if (last_buddy_ok())
result = last_buddy;
if (next_buddy_ok())
result = next_buddy;
[...]
The intended behavior is to prefer next buddy over last buddy;
the current code somewhat obfuscates this, and also wastes
cycles checking the last buddy when eventually the next buddy is
picked up.
So this patch refactors two 'ifs' above into
[...]
if (next_buddy_ok())
result = next_buddy;
else if (last_buddy_ok())
result = last_buddy;
[...]
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guitttot@linaro.org>
Link: https://lkml.kernel.org/r/20200930173532.1069092-1-posk@google.com
This patchset is based on Google-internal RSEQ work done by Paul
Turner and Andrew Hunter.
When working with per-CPU RSEQ-based memory allocations, it is
sometimes important to make sure that a global memory location is no
longer accessed from RSEQ critical sections. For example, there can be
two per-CPU lists, one is "active" and accessed per-CPU, while another
one is inactive and worked on asynchronously "off CPU" (e.g. garbage
collection is performed). Then at some point the two lists are
swapped, and a fast RCU-like mechanism is required to make sure that
the previously active list is no longer accessed.
This patch introduces such a mechanism: in short, membarrier() syscall
issues an IPI to a CPU, restarting a potentially active RSEQ critical
section on the CPU.
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lkml.kernel.org/r/20200923233618.2572849-1-posk@google.com
The busy_factor, which increases load balance interval when a cpu is busy,
is set to 32 by default. This value generates some huge LB interval on
large system like the THX2 made of 2 node x 28 cores x 4 threads.
For such system, the interval increases from 112ms to 3584ms at MC level.
And from 228ms to 7168ms at NUMA level.
Even on smaller system, a lower busy factor has shown improvement on the
fair distribution of the running time so let reduce it for all.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Link: https://lkml.kernel.org/r/20200921072424.14813-5-vincent.guittot@linaro.org
sched domains tend to trigger simultaneously the load balance loop but
the larger domains often need more time to collect statistics. This
slowness makes the larger domain trying to detach tasks from a rq whereas
tasks already migrated somewhere else at a sub-domain level. This is not
a real problem for idle LB because the period of smaller domains will
increase with its CPUs being busy and this will let time for higher ones
to pulled tasks. But this becomes a problem when all CPUs are already busy
because all domains stay synced when they trigger their LB.
A simple way to minimize simultaneous LB of all domains is to decrement the
the busy interval by 1 jiffies. Because of the busy_factor, the interval of
larger domain will not be a multiple of smaller ones anymore.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Link: https://lkml.kernel.org/r/20200921072424.14813-4-vincent.guittot@linaro.org
The 25% default imbalance threshold for DIE and NUMA domain is large
enough to generate significant unfairness between threads. A typical
example is the case of 11 threads running on 2x4 CPUs. The imbalance of
20% between the 2 groups of 4 cores is just low enough to not trigger
the load balance between the 2 groups. We will have always the same 6
threads on one group of 4 CPUs and the other 5 threads on the other
group of CPUS. With a fair time sharing in each group, we ends up with
+20% running time for the group of 5 threads.
Consider decreasing the imbalance threshold for overloaded case where we
use the load to balance task and to ensure fair time sharing.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Hillf Danton <hdanton@sina.com>
Link: https://lkml.kernel.org/r/20200921072424.14813-3-vincent.guittot@linaro.org
Some UCs like 9 always running tasks on 8 CPUs can't be balanced and the
load balancer currently migrates the waiting task between the CPUs in an
almost random manner. The success of a rq pulling a task depends of the
value of nr_balance_failed of its domains and its ability to be faster
than others to detach it. This behavior results in an unfair distribution
of the running time between tasks because some CPUs will run most of the
time, if not always, the same task whereas others will share their time
between several tasks.
Instead of using nr_balance_failed as a boolean to relax the condition
for detaching task, the LB will use nr_balanced_failed to relax the
threshold between the tasks'load and the imbalance. This mecanism
prevents the same rq or domain to always win the load balance fight.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Link: https://lkml.kernel.org/r/20200921072424.14813-2-vincent.guittot@linaro.org
In the file fair.c, sometims update_tg_load_avg(cfs_rq, 0) is used,
sometimes update_tg_load_avg(cfs_rq, false) is used.
update_tg_load_avg() has the parameter force, but in current code,
it never set 1 or true to it, so remove the force parameter.
Signed-off-by: Xianting Tian <tian.xianting@h3c.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200924014755.36253-1-tian.xianting@h3c.com
We've met problems that occasionally tasks with full cpumask
(e.g. by putting it into a cpuset or setting to full affinity)
were migrated to our isolated cpus in production environment.
After some analysis, we found that it is due to the current
select_idle_smt() not considering the sched_domain mask.
Steps to reproduce on my 31-CPU hyperthreads machine:
1. with boot parameter: "isolcpus=domain,2-31"
(thread lists: 0,16 and 1,17)
2. cgcreate -g cpu:test; cgexec -g cpu:test "test_threads"
3. some threads will be migrated to the isolated cpu16~17.
Fix it by checking the valid domain mask in select_idle_smt().
Fixes: 10e2f1acd0 ("sched/core: Rewrite and improve select_idle_siblings())
Reported-by: Wetp Zhang <wetp.zy@linux.alibaba.com>
Signed-off-by: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/1600930127-76857-1-git-send-email-xlpang@linux.alibaba.com
There is no caller in tree, so can remove it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lkml.kernel.org/r/20200922132410.48440-1-yuehaibing@huawei.com
The RT_RUNTIME_SHARE sched feature enables the sharing of rt_runtime
between CPUs, allowing a CPU to run a real-time task up to 100% of the
time while leaving more space for non-real-time tasks to run on the CPU
that lend rt_runtime.
The problem is that a CPU can easily borrow enough rt_runtime to allow
a spinning rt-task to run forever, starving per-cpu tasks like kworkers,
which are non-real-time by design.
This patch disables RT_RUNTIME_SHARE by default, avoiding this problem.
The feature will still be present for users that want to enable it,
though.
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Wei Wang <wvw@google.com>
Link: https://lkml.kernel.org/r/b776ab46817e3db5d8ef79175fa0d71073c051c7.1600697903.git.bristot@redhat.com
When a boosted task gets throttled, what normally happens is that it's
immediately enqueued again with ENQUEUE_REPLENISH, which replenishes the
runtime and clears the dl_throttled flag. There is a special case however:
if the throttling happened on sched-out and the task has been deboosted in
the meantime, the replenish is skipped as the task will return to its
normal scheduling class. This leaves the task with the dl_throttled flag
set.
Now if the task gets boosted up to the deadline scheduling class again
while it is sleeping, it's still in the throttled state. The normal wakeup
however will enqueue the task with ENQUEUE_REPLENISH not set, so we don't
actually place it on the rq. Thus we end up with a task that is runnable,
but not actually on the rq and neither a immediate replenishment happens,
nor is the replenishment timer set up, so the task is stuck in
forever-throttled limbo.
Clear the dl_throttled flag before dropping back to the normal scheduling
class to fix this issue.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lkml.kernel.org/r/20200831110719.2126930-1-l.stach@pengutronix.de
Use runnable_avg to classify numa node state similarly to what is done for
normal load balancer. This helps to ensure that numa and normal balancers
use the same view of the state of the system.
Large arm64system: 2 nodes / 224 CPUs:
hackbench -l (256000/#grp) -g #grp
grp tip/sched/core +patchset improvement
1 14,008(+/- 4,99 %) 13,800(+/- 3.88 %) 1,48 %
4 4,340(+/- 5.35 %) 4.283(+/- 4.85 %) 1,33 %
16 3,357(+/- 0.55 %) 3.359(+/- 0.54 %) -0,06 %
32 3,050(+/- 0.94 %) 3.039(+/- 1,06 %) 0,38 %
64 2.968(+/- 1,85 %) 3.006(+/- 2.92 %) -1.27 %
128 3,290(+/-12.61 %) 3,108(+/- 5.97 %) 5.51 %
256 3.235(+/- 3.95 %) 3,188(+/- 2.83 %) 1.45 %
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/20200921072959.16317-1-vincent.guittot@linaro.org
The last sd_flag_debug shuffle inadvertently moved its definition within
an #ifdef CONFIG_SYSCTL region. While CONFIG_SYSCTL is indeed required to
produce the sched domain ctl interface (which uses sd_flag_debug to output
flag names), it isn't required to run any assertion on the sched_domain
hierarchy itself.
Move the definition of sd_flag_debug to a CONFIG_SCHED_DEBUG region of
topology.c.
Now at long last we have:
- sd_flag_debug declared in include/linux/sched/topology.h iff
CONFIG_SCHED_DEBUG=y
- sd_flag_debug defined in kernel/sched/topology.c, conditioned by:
- CONFIG_SCHED_DEBUG, with an explicit #ifdef block
- CONFIG_SMP, as a requirement to compile topology.c
With this change, all symbols pertaining to SD flag metadata (with the
exception of __SD_FLAG_CNT) are now defined exclusively within topology.c
Fixes: 8fca9494d4 ("sched/topology: Move sd_flag_debug out of linux/sched/topology.h")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200908184956.23369-1-valentin.schneider@arm.com
- Prevent recursion by using raw_cpu_* operations
- Fixup the interrupt state in the cpu idle code to be consistent
- Push rcu_idle_enter/exit() invocations deeper into the idle path so
that the lock operations are inside the RCU watching sections
- Move trace_cpu_idle() into generic code so it's called before RCU goes
idle.
- Handle raw_local_irq* vs. local_irq* operations correctly
- Move the tracepoints out from under the lockdep recursion handling
which turned out to be fragile and inconsistent.
-----BEGIN PGP SIGNATURE-----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=Hgt6
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"A set of fixes for lockdep, tracing and RCU:
- Prevent recursion by using raw_cpu_* operations
- Fixup the interrupt state in the cpu idle code to be consistent
- Push rcu_idle_enter/exit() invocations deeper into the idle path so
that the lock operations are inside the RCU watching sections
- Move trace_cpu_idle() into generic code so it's called before RCU
goes idle.
- Handle raw_local_irq* vs. local_irq* operations correctly
- Move the tracepoints out from under the lockdep recursion handling
which turned out to be fragile and inconsistent"
* tag 'locking-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep,trace: Expose tracepoints
lockdep: Only trace IRQ edges
mips: Implement arch_irqs_disabled()
arm64: Implement arch_irqs_disabled()
nds32: Implement arch_irqs_disabled()
locking/lockdep: Cleanup
x86/entry: Remove unused THUNKs
cpuidle: Move trace_cpu_idle() into generic code
cpuidle: Make CPUIDLE_FLAG_TLB_FLUSHED generic
sched,idle,rcu: Push rcu_idle deeper into the idle path
cpuidle: Fixup IRQ state
lockdep: Use raw_cpu_*() for per-cpu variables
SD_DEGENERATE_GROUPS_MASK is only useful for sched/topology.c, but still
gets defined for anyone who imports topology.h, leading to a flurry of
unused variable warnings.
Move it out of the header and place it next to the SD degeneration
functions in sched/topology.c.
Fixes: 4ee4ea443a ("sched/topology: Introduce SD metaflag for flags needing > 1 groups")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200825133216.9163-2-valentin.schneider@arm.com
Defining an array in a header imported all over the place clearly is a daft
idea, that still didn't stop me from doing it.
Leave a declaration of sd_flag_debug in topology.h and move its definition
to sched/debug.c.
Fixes: b6e862f386 ("sched/topology: Define and assign sched_domain flag metadata")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200825133216.9163-1-valentin.schneider@arm.com
sched_submit_work() is considered to be a hot path. The preempt_disable()
instruction is a compiler barrier and forces the compiler to load
task_struct::flags for the second comparison.
By using a local variable, the compiler can load the value once and keep it in
a register for the second comparison.
Verified on x86-64 with gcc-10.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200819200025.lqvmyefqnbok5i4f@linutronix.de
The code in reweight_entity() can be simplified.
For a sched entity on the rq, the entity accounting can be replaced by
cfs_rq instantaneous load updates currently called from within the
entity accounting.
Even though an entity on the rq can't represent a task in
reweight_entity() (a task is always dequeued before calling this
function) and so the numa task accounting and the rq->cfs_tasks list
management of the entity accounting are never called, the redundant
cfs_rq->nr_running decrement/increment will be avoided.
Signed-off-by: Jiang Biao <benbjiang@tencent.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20200811113209.34057-1-benbjiang@tencent.com
In find_energy_efficient_cpu() 'cpu_cap' could be less that 'util'.
It might be because of RT, DL (so higher sched class than CFS), irq or
thermal pressure signal, which reduce the capacity value.
In such situation the result of 'cpu_cap - util' might be negative but
stored in the unsigned long. Then it might be compared with other unsigned
long when uclamp_rq_util_with() reduced the 'util' such that is passes the
fits_capacity() check.
Prevent this situation and make the arithmetic more safe.
Fixes: 1d42509e47 ("sched/fair: Make EAS wakeup placement consider uclamp restrictions")
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20200810083004.26420-1-lukasz.luba@arm.com
SMT siblings share caches, so cache hotness should be irrelevant for
cross-sibling migration.
Signed-off-by: Josh Don <joshdon@google.com>
Proposed-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200804193413.510651-1-joshdon@google.com
Remove trace_cpu_idle() from the arch_cpu_idle() implementations and
put it in the generic code, right before disabling RCU. Gets rid of
more trace_*_rcuidle() users.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200821085348.428433395@infradead.org
Lots of things take locks, due to a wee bug, rcu_lockdep didn't notice
that the locking tracepoints were using RCU.
Push rcu_idle_{enter,exit}() as deep as possible into the idle paths,
this also resolves a lot of _rcuidle()/RCU_NONIDLE() usage.
Specifically, sched_clock_idle_wakeup_event() will use ktime which
will use seqlocks which will tickle lockdep, and
stop_critical_timings() uses lock.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200821085348.310943801@infradead.org
SD_PREFER_SIBLING is currently considered in sd_parent_degenerate() but not
in sd_degenerate(). It too hinges on load balancing, and thus won't have
any effect when set on a domain with a single group. Add it to
SD_DEGENERATE_GROUPS_MASK.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20200817113003.20802-12-valentin.schneider@arm.com
We currently set this flag *only* on domains whose topology level exactly
match the level where we detect asymmetry (as returned by
asym_cpu_capacity_level()). This is rather problematic.
Say there are two clusters in the system, one with a lone big CPU and the
other with a mix of big and LITTLE CPUs (as is allowed by DynamIQ):
DIE [ ]
MC [ ][ ]
0 1 2 3 4
L L B B B
asym_cpu_capacity_level() will figure out that the MC level is the one
where all CPUs can see a CPU of max capacity, and we will thus set
SD_ASYM_CPUCAPACITY at MC level for all CPUs.
That lone big CPU will degenerate its MC domain, since it would be alone in
there, and will end up with just a DIE domain. Since the flag was only set
at MC, this CPU ends up not seeing any SD with the flag set, which is
broken.
Rather than clearing dflags at every topology level, clear it before
entering the topology level loop. This will properly propagate upwards
flags that are set starting from a certain level.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Quentin Perret <qperret@google.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20200817113003.20802-11-valentin.schneider@arm.com
If there is only a single NUMA node in the system, the only NUMA topology
level that will be generated will be NODE (identity distance), which
doesn't have SD_SERIALIZE.
This means we don't need this special case in sd_parent_degenerate(), as
having the NODE level "naturally" covers it. Thus, remove it.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20200817113003.20802-10-valentin.schneider@arm.com
Decoding the output of /proc/sys/kernel/sched_domain/cpu*/domain*/flags has
always been somewhat annoying, as one needs to go fetch the bit -> name
mapping from the source code itself. This encoding can be saved in a script
somewhere, but that isn't safe from flags being added, removed or even
shuffled around.
What matters for debugging purposes is to get *which* flags are set in a
given domain, their associated value is pretty much meaningless.
Make the sd flags debug file output flag names.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20200817113003.20802-7-valentin.schneider@arm.com
Now that we have some description of what we expect the flags layout to
be, we can use that to assert at runtime that the actual layout is sane.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20200817113003.20802-6-valentin.schneider@arm.com
This flag was introduced in 2014 by commit:
d77b3ed5c9 ("sched: Add a new SD_SHARE_POWERDOMAIN for sched_domain")
but AFAIA it was never leveraged by the scheduler. The closest thing I can
think of is EAS caring about frequency domains, and it does that by
leveraging performance domains.
Remove the flag. No change in functionality is expected.
Suggested-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20200817113003.20802-2-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ffEv
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Two fixes: fix a new tracepoint's output value, and fix the formatting
of show-state syslog printouts"
* tag 'sched-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/debug: Fix the alignment of the show-state debug output
sched: Fix use of count for nr_running tracepoint
Current sysrq(t) output task fields name are not aligned with
actual task fields value, e.g.:
kernel: sysrq: Show State
kernel: task PC stack pid father
kernel: systemd S12456 1 0 0x00000000
kernel: Call Trace:
kernel: ? __schedule+0x240/0x740
To make it more readable, print fields name together with task fields
value in the same line, with fixed width:
kernel: sysrq: Show State
kernel: task:systemd state:S stack:12920 pid: 1 ppid: 0 flags:0x00000000
kernel: Call Trace:
kernel: __schedule+0x282/0x620
Signed-off-by: Libing Zhou <libing.zhou@nokia-sbell.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200814030236.37835-1-libing.zhou@nokia-sbell.com
static priority level knowledge from non-scheduler code.
The three APIs for non-scheduler code to set SCHED_FIFO are:
- sched_set_fifo()
- sched_set_fifo_low()
- sched_set_normal()
These are two FIFO priority levels: default (high), and a 'low' priority level,
plus sched_set_normal() to set the policy back to non-SCHED_FIFO.
Since the changes affect a lot of non-scheduler code, we kept this in a separate
tree.
When merging to the latest upstream tree there's a conflict in drivers/spi/spi.c,
which can be resolved via:
sched_set_fifo(ctlr->kworker_task);
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=/7JH
-----END PGP SIGNATURE-----
Merge tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull sched/fifo updates from Ingo Molnar:
"This adds the sched_set_fifo*() encapsulation APIs to remove static
priority level knowledge from non-scheduler code.
The three APIs for non-scheduler code to set SCHED_FIFO are:
- sched_set_fifo()
- sched_set_fifo_low()
- sched_set_normal()
These are two FIFO priority levels: default (high), and a 'low'
priority level, plus sched_set_normal() to set the policy back to
non-SCHED_FIFO.
Since the changes affect a lot of non-scheduler code, we kept this in
a separate tree"
* tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
sched,tracing: Convert to sched_set_fifo()
sched: Remove sched_set_*() return value
sched: Remove sched_setscheduler*() EXPORTs
sched,psi: Convert to sched_set_fifo_low()
sched,rcutorture: Convert to sched_set_fifo_low()
sched,rcuperf: Convert to sched_set_fifo_low()
sched,locktorture: Convert to sched_set_fifo()
sched,irq: Convert to sched_set_fifo()
sched,watchdog: Convert to sched_set_fifo()
sched,serial: Convert to sched_set_fifo()
sched,powerclamp: Convert to sched_set_fifo()
sched,ion: Convert to sched_set_normal()
sched,powercap: Convert to sched_set_fifo*()
sched,spi: Convert to sched_set_fifo*()
sched,mmc: Convert to sched_set_fifo*()
sched,ivtv: Convert to sched_set_fifo*()
sched,drm/scheduler: Convert to sched_set_fifo*()
sched,msm: Convert to sched_set_fifo*()
sched,psci: Convert to sched_set_fifo*()
sched,drbd: Convert to sched_set_fifo*()
...
The count field is meant to tell if an update to nr_running
is an add or a subtract. Make it do so by adding the missing
minus sign.
Fixes: 9d246053a6 ("sched: Add a tracepoint to track rq->nr_running")
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200805203138.1411-1-pauld@redhat.com
- Make the Energy Model cover non-CPU devices (Lukasz Luba).
- Add Ice Lake server idle states table to the intel_idle driver
and eliminate a redundant static variable from it (Chen Yu,
Rafael Wysocki).
- Eliminate all W=1 build warnings from cpufreq (Lee Jones).
- Add support for Sapphire Rapids and for Power Limit 4 to the
Intel RAPL power capping driver (Sumeet Pawnikar, Zhang Rui).
- Fix function name in kerneldoc comments in the idle_inject power
capping driver (Yangtao Li).
- Fix locking issues with cpufreq governors and drop a redundant
"weak" function definition from cpufreq (Viresh Kumar).
- Rearrange cpufreq to register non-modular governors at the
core_initcall level and allow the default cpufreq governor to
be specified in the kernel command line (Quentin Perret).
- Extend, fix and clean up the intel_pstate driver (Srinivas
Pandruvada, Rafael Wysocki):
* Add a new sysfs attribute for disabling/enabling CPU
energy-efficiency optimizations in the processor.
* Make the driver avoid enabling HWP if EPP is not supported.
* Allow the driver to handle numeric EPP values in the sysfs
interface and fix the setting of EPP via sysfs in the active
mode.
* Eliminate a static checker warning and clean up a kerneldoc
comment.
- Clean up some variable declarations in the powernv cpufreq
driver (Wei Yongjun).
- Fix up the ->enter_s2idle callback definition to cover the case
when it points to the same function as ->idle correctly (Neal
Liu).
- Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson).
- Make the PM core emit "changed" uevent when adding/removing the
"wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi).
- Add a helper macro for declaring PM callbacks and use it in the
MMC jz4740 driver (Paul Cercueil).
- Fix white space in some places in the hibernate code and make the
system-wide PM code use "const char *" where appropriate (Xiang
Chen, Alexey Dobriyan).
- Add one more "unsafe" helper macro to the freezer to cover the NFS
use case (He Zhe).
- Change the language in the generic PM domains framework to use
parent/child terminology and clean up a typo and some comment
fromatting in that code (Kees Cook, Geert Uytterhoeven).
- Update the operating performance points OPP framework (Lukasz
Luba, Andrew-sh.Cheng, Valdis Kletnieks):
* Refactor dev_pm_opp_of_register_em() and update related drivers.
* Add a missing function export.
* Allow disabled OPPs in dev_pm_opp_get_freq().
- Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric
Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier):
* Add support for delayed timers to the devfreq core and make the
Samsung exynos5422-dmc driver use it.
* Unify sysfs interface to use "df-" as a prefix in instance names
consistently.
* Fix devfreq_summary debugfs node indentation.
* Add the rockchip,pmu phandle to the rk3399_dmc driver DT
bindings.
* List Dmitry Osipenko as the Tegra devfreq driver maintainer.
* Fix typos in the core devfreq code.
- Update the pm-graph utility to version 5.7 including a number of
fixes related to suspend-to-idle (Todd Brandt).
- Fix coccicheck errors and warnings in the cpupower utility (Shuah
Khan).
- Replace HTTP links with HTTPs ones in multiple places (Alexander
A. Klimov).
-----BEGIN PGP SIGNATURE-----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=8cUO
-----END PGP SIGNATURE-----
Merge tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The most significant change here is the extension of the Energy Model
to cover non-CPU devices (as well as CPUs) from Lukasz Luba.
There is also some new hardware support (Ice Lake server idle states
table for intel_idle, Sapphire Rapids and Power Limit 4 support in the
RAPL driver), some new functionality in the existing drivers (eg. a
new switch to disable/enable CPU energy-efficiency optimizations in
intel_pstate, delayed timers in devfreq), some assorted fixes (cpufreq
core, intel_pstate, intel_idle) and cleanups (eg. cpuidle-psci,
devfreq), including the elimination of W=1 build warnings from cpufreq
done by Lee Jones.
Specifics:
- Make the Energy Model cover non-CPU devices (Lukasz Luba).
- Add Ice Lake server idle states table to the intel_idle driver and
eliminate a redundant static variable from it (Chen Yu, Rafael
Wysocki).
- Eliminate all W=1 build warnings from cpufreq (Lee Jones).
- Add support for Sapphire Rapids and for Power Limit 4 to the Intel
RAPL power capping driver (Sumeet Pawnikar, Zhang Rui).
- Fix function name in kerneldoc comments in the idle_inject power
capping driver (Yangtao Li).
- Fix locking issues with cpufreq governors and drop a redundant
"weak" function definition from cpufreq (Viresh Kumar).
- Rearrange cpufreq to register non-modular governors at the
core_initcall level and allow the default cpufreq governor to be
specified in the kernel command line (Quentin Perret).
- Extend, fix and clean up the intel_pstate driver (Srinivas
Pandruvada, Rafael Wysocki):
* Add a new sysfs attribute for disabling/enabling CPU
energy-efficiency optimizations in the processor.
* Make the driver avoid enabling HWP if EPP is not supported.
* Allow the driver to handle numeric EPP values in the sysfs
interface and fix the setting of EPP via sysfs in the active
mode.
* Eliminate a static checker warning and clean up a kerneldoc
comment.
- Clean up some variable declarations in the powernv cpufreq driver
(Wei Yongjun).
- Fix up the ->enter_s2idle callback definition to cover the case
when it points to the same function as ->idle correctly (Neal Liu).
- Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson).
- Make the PM core emit "changed" uevent when adding/removing the
"wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi).
- Add a helper macro for declaring PM callbacks and use it in the MMC
jz4740 driver (Paul Cercueil).
- Fix white space in some places in the hibernate code and make the
system-wide PM code use "const char *" where appropriate (Xiang
Chen, Alexey Dobriyan).
- Add one more "unsafe" helper macro to the freezer to cover the NFS
use case (He Zhe).
- Change the language in the generic PM domains framework to use
parent/child terminology and clean up a typo and some comment
fromatting in that code (Kees Cook, Geert Uytterhoeven).
- Update the operating performance points OPP framework (Lukasz Luba,
Andrew-sh.Cheng, Valdis Kletnieks):
* Refactor dev_pm_opp_of_register_em() and update related drivers.
* Add a missing function export.
* Allow disabled OPPs in dev_pm_opp_get_freq().
- Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric
Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier):
* Add support for delayed timers to the devfreq core and make the
Samsung exynos5422-dmc driver use it.
* Unify sysfs interface to use "df-" as a prefix in instance
names consistently.
* Fix devfreq_summary debugfs node indentation.
* Add the rockchip,pmu phandle to the rk3399_dmc driver DT
bindings.
* List Dmitry Osipenko as the Tegra devfreq driver maintainer.
* Fix typos in the core devfreq code.
- Update the pm-graph utility to version 5.7 including a number of
fixes related to suspend-to-idle (Todd Brandt).
- Fix coccicheck errors and warnings in the cpupower utility (Shuah
Khan).
- Replace HTTP links with HTTPs ones in multiple places (Alexander A.
Klimov)"
* tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (71 commits)
cpuidle: ACPI: fix 'return' with no value build warning
cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode
cpufreq: intel_pstate: Rearrange the storing of new EPP values
intel_idle: Customize IceLake server support
PM / devfreq: Fix the wrong end with semicolon
PM / devfreq: Fix indentaion of devfreq_summary debugfs node
PM / devfreq: Clean up the devfreq instance name in sysfs attr
memory: samsung: exynos5422-dmc: Add module param to control IRQ mode
memory: samsung: exynos5422-dmc: Adjust polling interval and uptreshold
memory: samsung: exynos5422-dmc: Use delayed timer as default
PM / devfreq: Add support delayed timer for polling mode
dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandle
PM / devfreq: tegra: Add Dmitry as a maintainer
PM / devfreq: event: Fix trivial spelling
PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absent
cpuidle: change enter_s2idle() prototype
cpuidle: psci: Prevent domain idlestates until consumers are ready
cpuidle: psci: Convert PM domain to platform driver
cpuidle: psci: Fix error path via converting to a platform driver
cpuidle: psci: Fail cpuidle registration if set OSI mode failed
...
- Improve uclamp performance by using a static key for the fast path
- Add the "sched_util_clamp_min_rt_default" sysctl, to optimize for
better power efficiency of RT tasks on battery powered devices.
(The default is to maximize performance & reduce RT latencies.)
- Improve utime and stime tracking accuracy, which had a fixed boundary
of error, which created larger and larger relative errors as the values
become larger. This is now replaced with more precise arithmetics,
using the new mul_u64_u64_div_u64() helper in math64.h.
- Improve the deadline scheduler, such as making it capacity aware
- Improve frequency-invariant scheduling
- Misc cleanups in energy/power aware scheduling
- Add sched_update_nr_running tracepoint to track changes to nr_running
- Documentation additions and updates
- Misc cleanups and smaller fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=PbO7
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Improve uclamp performance by using a static key for the fast path
- Add the "sched_util_clamp_min_rt_default" sysctl, to optimize for
better power efficiency of RT tasks on battery powered devices.
(The default is to maximize performance & reduce RT latencies.)
- Improve utime and stime tracking accuracy, which had a fixed boundary
of error, which created larger and larger relative errors as the
values become larger. This is now replaced with more precise
arithmetics, using the new mul_u64_u64_div_u64() helper in math64.h.
- Improve the deadline scheduler, such as making it capacity aware
- Improve frequency-invariant scheduling
- Misc cleanups in energy/power aware scheduling
- Add sched_update_nr_running tracepoint to track changes to nr_running
- Documentation additions and updates
- Misc cleanups and smaller fixes
* tag 'sched-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
sched/doc: Factorize bits between sched-energy.rst & sched-capacity.rst
sched/doc: Document capacity aware scheduling
sched: Document arch_scale_*_capacity()
arm, arm64: Fix selection of CONFIG_SCHED_THERMAL_PRESSURE
Documentation/sysctl: Document uclamp sysctl knobs
sched/uclamp: Add a new sysctl to control RT default boost value
sched/uclamp: Fix a deadlock when enabling uclamp static key
sched: Remove duplicated tick_nohz_full_enabled() check
sched: Fix a typo in a comment
sched/uclamp: Remove unnecessary mutex_init()
arm, arm64: Select CONFIG_SCHED_THERMAL_PRESSURE
sched: Cleanup SCHED_THERMAL_PRESSURE kconfig entry
arch_topology, sched/core: Cleanup thermal pressure definition
trace/events/sched.h: fix duplicated word
linux/sched/mm.h: drop duplicated words in comments
smp: Fix a potential usage of stale nr_cpus
sched/fair: update_pick_idlest() Select group with lowest group_util when idle_cpus are equal
sched: nohz: stop passing around unused "ticks" parameter.
sched: Better document ttwu()
sched: Add a tracepoint to track rq->nr_running
...
* pm-cpufreq: (24 commits)
cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode
cpufreq: intel_pstate: Rearrange the storing of new EPP values
cpufreq: intel_pstate: Avoid enabling HWP if EPP is not supported
cpufreq: intel_pstate: Clean up aperf_mperf_shift description
cpufreq: powernv: Make some symbols static
cpufreq: amd_freq_sensitivity: Mark sometimes used ID structs as __maybe_unused
cpufreq: intel_pstate: Supply struct attribute description for get_aperf_mperf_shift()
cpufreq: pcc-cpufreq: Mark sometimes used ID structs as __maybe_unused
cpufreq: powernow-k8: Mark 'hi' and 'lo' dummy variables as __always_unused
cpufreq: acpi-cpufreq: Mark sometimes used ID structs as __maybe_unused
cpufreq: acpi-cpufreq: Mark 'dummy' variable as __always_unused
cpufreq: powernv-cpufreq: Fix a bunch of kerneldoc related issues
cpufreq: pasemi: Include header file for {check,restore}_astate prototypes
cpufreq: cpufreq_governor: Demote store_sampling_rate() header to standard comment block
cpufreq: cpufreq: Demote lots of function headers unworthy of kerneldoc status
cpufreq: freq_table: Demote obvious misuse of kerneldoc to standard comment blocks
cpufreq: Replace HTTP links with HTTPS ones
cpufreq: intel_pstate: Fix static checker warning for epp variable
cpufreq: Remove the weakly defined cpufreq_default_governor()
cpufreq: Specify default governor on command line
...
* pm-em:
OPP: refactor dev_pm_opp_of_register_em() and update related drivers
Documentation: power: update Energy Model description
PM / EM: change name of em_pd_energy to em_cpu_energy
PM / EM: remove em_register_perf_domain
PM / EM: add support for other devices than CPUs in Energy Model
PM / EM: update callback structure and add device pointer
PM / EM: introduce em_dev_register_perf_domain function
PM / EM: change naming convention from 'capacity' to 'performance'
* pm-core:
mmc: jz4740: Use pm_ptr() macro
PM: Make *_DEV_PM_OPS macros use __maybe_unused
PM: core: introduce pm_ptr() macro
