Also, adjust the formatting a bit, and expand the section about using
TARGETS= on the make command line.
Signed-off-by: Tim Bird <tim.bird@sonymobile.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, plus on the kernel side:
- a revert for a newly introduced PMU driver which isn't complete yet
and where we ran out of time with fixes (to be tried again in
v3.19) - this makes up for a large chunk of the diffstat.
- compilation warning fixes
- a printk message fix
- event_idx usage fixes/cleanups"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf probe: Trivial typo fix for --demangle
perf tools: Fix report -F dso_from for data without branch info
perf tools: Fix report -F dso_to for data without branch info
perf tools: Fix report -F symbol_from for data without branch info
perf tools: Fix report -F symbol_to for data without branch info
perf tools: Fix report -F mispredict for data without branch info
perf tools: Fix report -F in_tx for data without branch info
perf tools: Fix report -F abort for data without branch info
perf tools: Make CPUINFO_PROC an array to support different kernel versions
perf callchain: Use global caching provided by libunwind
perf/x86/intel: Revert incomplete and undocumented Broadwell client support
perf/x86: Fix compile warnings for intel_uncore
perf: Fix typos in sample code in the perf_event.h header
perf: Fix and clean up initialization of pmu::event_idx
perf: Fix bogus kernel printk
perf diff: Add missing hists__init() call at tool start
Replace "Disable" with "Enable", since --demangle option enables symbol
demangling, not disable it.
perf probe has --demangle and --no-demangle options, but the
command-line help (--help) shows only --demangle option. So it should
explain about --demangle.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20141027203124.21219.68278.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The branch field sorting code assumes hist_entry::branch_info is
allocated, which is wrong and following perf session ends up with report
segfault.
$ perf record ls
$ perf report -F dso_from
perf: Segmentation fault
Checking that hist_entry::branch_info is valid and display "N/A" string
in snprint callback if it's not.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1413468427-31049-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The branch field sorting code assumes hist_entry::branch_info is
allocated, which is wrong and following perf session ends up with report
segfault.
$ perf record ls
$ perf report -F dso_to
perf: Segmentation fault
Checking that hist_entry::branch_info is valid and display "N/A" string
in snprint callback if it's not.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1413468427-31049-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The branch field sorting code assumes hist_entry::branch_info is
allocated, which is wrong and following perf session ends up with report
segfault.
$ perf record ls
$ perf report -F symbol_from
perf: Segmentation fault
Checking that hist_entry::branch_info is valid and display "N/A" string
in snprint callback if it's not.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1413468427-31049-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The branch field sorting code assumes hist_entry::branch_info is
allocated, which is wrong and following perf session ends up with report
segfault.
$ perf record ls
$ perf report -F symbol_to
perf: Segmentation fault
Checking that hist_entry::branch_info is valid and display "N/A" string
in snprint callback if it's not.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1413468427-31049-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The branch field sorting code assumes hist_entry::branch_info is
allocated, which is wrong and following perf session ends up with report
segfault.
$ perf record ls
$ perf report -F mispredict
perf: Segmentation fault
Checking that hist_entry::branch_info is valid and display "N/A" string
in snprint callback if it's not.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1413468427-31049-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The branch field sorting code assumes hist_entry::branch_info is
allocated, which is wrong and following perf session ends up with report
segfault.
$ perf record ls
$ perf report -F in_tx
perf: Segmentation fault
Checking that hist_entry::branch_info is valid and display "N/A" string
in snprint callback if it's not.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1413468427-31049-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The branch field sorting code assumes hist_entry::branch_info is
allocated, which is wrong and following perf session ends up with report
segfault.
$ perf record ls
$ perf report -F abort
perf: Segmentation fault
Checking that hist_entry::branch_info is valid and display "N/A" string
in snprint callback if it's not.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1413468427-31049-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After kernel 3.7 (commit b4b8f770eb),
/proc/cpuinfo replaces 'Processor' to 'model name'.
This patch makes CPUINFO_PROC to an array and provides two choices for
ARM, makes it compatible for different kernel version.
v1 -> v2: minor changes as suggested by Namhyung Kim:
- Doesn't pass @h and @evlist to __write_cpudesc;
- Coding style fix.
v2 -> v3:
- Rebase:
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git perf/core
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1414115126-7479-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The libunwind provides two caching policy which are global and
per-thread. As perf unwinds callchains in a single thread, it'd
sufficient to use global caching.
This speeds up my perf report from 14s to 7s on a ~260MB data file.
Although the output sometimes contains a slight difference (~0.01% in
terms of number of lines printed) on callchains which were not resolved.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jean Pihet <jean.pihet@linaro.org>
Cc: Arun Sharma <asharma@fb.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1412556363-26229-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It also uses hists/hist_entries, hists__init() should be called before
creating any evsels.
Otherwise no extra space will be allocated per perf_evsel nor this space
will be initialized when allocating a new perf_evsel instance, resulting
in reads/writes to non allocated space, oops. Fix it.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1414004561-22096-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Eliminate an error message for batch-mode processing on unix
systems. ACPICA BZ 1114.
This patch is mainly for fixing the issues of acpiexec which is not in the
Linux upstream.
Link: https://bugs.acpica.org/show_bug.cgi?id=1114
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The acpidump currently always uses ACPI 2.0 format to dump RSDP, this patch
adds ACPI 1.0 RSDP support.
Link: https://bugs.acpica.org/show_bug.cgi?id=1097
Link: https://bugs.acpica.org/show_bug.cgi?id=1103
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reported-and-tested-by: Rudolf Marek <r.marek@assembler.cz>
Reported-and-tested-by: Rafal <fatwildcat@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The only thing we need is a forward declaration for 'struct cgroup_sel',
that is inside 'struct perf_evsel'.
Include cgroup.h instead on the tools that support cgroups.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-b7kuymbgf0zxi5viyjjtu5hk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was being found, by chance, because evsel.h needlessly includes
util/cgroup.h, which will be sorted out in a following patch.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-xsvxr747wkkpg1ay9dramorr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that when an evsel is embedded into other struct it can free up
resources calling perf_evsel__exit().
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-n1w68pfe9m2vkhm4sqs8y1en@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Process of analyzing events caused by 2 functions: mmap_read() and
finished_round().
During mmap_read(), perf receives events from shared memory, queues
their pointers for further processing in finished_round() and notifies
the kernel that the events have been processed.
By the time when finished_round() is invoked, queued events can be
overwritten by the kernel, so the finished_round() occurs on potentially
corrupted memory.
Since there is no place where the event can be safely consumed, let's
copy events when queueing.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1412347212-28237-3-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When processing events the session code has an ordered samples queue
which is used to time-sort events coming in across multiple mmaps. At a
later point in time samples on the queue are flushed up to some
timestamp at which point the event is actually processed.
When analyzing events live (ie., record/analysis path in the same
command) there is a race that leads to corrupted events and parse errors
which cause perf to terminate. The problem is that when the event is
placed in the ordered samples queue it is only a reference to the event
which is really sitting in the mmap buffer. Even though the event is
queued for later processing the mmap tail pointer is updated which
indicates to the kernel that the event has been processed. The race is
flushing the event from the queue before it gets overwritten by some
other event. For commands trying to process events live (versus just
writing to a file) and processing a high rate of events this leads to
parse failures and perf terminates.
Examples hitting this problem are 'perf kvm stat live', especially with
nested VMs which generate 100,000+ traces per second, and a command
processing scheduling events with a high rate of context switching --
e.g., running 'perf bench sched pipe'.
This patch offers live commands an option to copy the event when it is
placed in the ordered samples queue.
Based on a patch from David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1412347212-28237-2-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fix spelling typos found in tool/perf/Documentation.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Randy Dunlap <rdunlap@infradead.org>
Link: http://lkml.kernel.org/r/1410275930-17207-1-git-send-email-standby24x7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is mechanical changes only for accounting access to thread->priv
properly in the source level.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1412556363-26229-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is mechanical changes only for accounting access to thread->priv
properly in the source level.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1412556363-26229-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The unw_addr_space_t in libunwind represents an address space to be used
for stack unwinding. It doesn't need to be create/destory everytime to
unwind callchain (as in get_entries) and can have a same lifetime as
thread (unless exec called).
So move the address space construction/destruction logic to the thread
lifetime handling functions. This is a preparation to enable caching in
the unwind library.
Note that it saves unw_addr_space_t object using thread__set_priv(). It
seems currently only used by perf trace and perf kvm stat commands which
don't use callchain.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jean Pihet <jean.pihet@linaro.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Arun Sharma <asharma@fb.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1412556363-26229-3-git-send-email-namhyung@kernel.org
[ Fixup unwind-libunwind.c missing CALLCHAIN_DWARF definition, added
missing __maybe_unused on unused parameters in stubs at util/unwind.h ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Normally the callchain_param.record_mode is used only for record path.
But as it might need to prepare something for dwarf unwinding, setup
this info for perf report too.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1412556363-26229-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix for double free bug in tools/perf due to dangling thread_map pointer
in perf_evlist struct.
Code path excercised when perf stat -C switch is used but not set and is
followed by another switch.
Example:
perf stat -C -e.
Signed-off-by: Yasser Shalabi <yassershalabi@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1412437077-13109-1-git-send-email-yassershalabi@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add test case in automated tests suite. It checks not only the two types
of pmu event stytle formats "pmu_event_name" and "cpu/pmu_event_name/",
but also the different formats mixtures which are more likely to trigger
parse issue.
The patch set including this one has been tested by the perf automated
test:
./perf test parse -v"
On haswell, ivybridge and Romley platform.
The patch set also has been tested on haswell by the following script.
Note: please make sure that your test system support TSX and
L1-dcache-loads events. Otherwise, you may want to change the events to
other pmu events.
[lk@localhost ~]$ cat perf_style_test.sh
# hardware events + kernel pmu event with different style
perf stat -x, -e cycles,mem-stores,tx-start sleep 2
perf stat -x, -e cpu-cycles,cycles-ct,cycles-t sleep 2
perf stat -x, -e cycles,cpu/cycles-ct/,cpu/cycles-t/ sleep 2
perf stat -x, -e instructions,cpu/tx-start/ sleep 2
perf stat -x, -e '{cycles,tx-start}' sleep 2
perf stat -x, -e '{cycles,cpu/tx-start/}' sleep 2
# HW Cache event + kernel pmu event with different style
perf stat -x, -e L1-dcache-loads,cpu/mem-stores/,tx-start sleep 2
perf stat -x, -e L1-dcache-loads,mem-stores,cpu/tx-start/ sleep 2
perf stat -x, -e '{L1-dcache-loads,mem-stores}' sleep 2
perf stat -x, -e '{L1-dcache-loads,cpu/tx-start/}' sleep 2
# Raw event + kernel pmu event with different style:
perf stat -x, -e cpu/event=0xc0,umask=0x00/,mem-loads,cpu/mem-stores/ sleep 2
perf stat -x, -e cpu/event=0xc0,umask=0x00/,tx-start,cpu/el-start/ sleep 2
perf stat -x, -e '{cpu/event=0xc0,umask=0x00/,tx-start}' sleep 2
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1412694532-23391-5-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add new rules for kernel PMU event.
Currently, the patch only want to handle the PMU event name as "a-b" and
"a".
event_pmu:
PE_KERNEL_PMU_EVENT sep_dc
|
PE_PMU_EVENT_PRE '-' PE_PMU_EVENT_SUF sep_dc
PE_KERNEL_PMU_EVENT token is for
cycles-ct/cycles-t/mem-loads/mem-stores.
The prefix cycles is mixed up with cpu-cycles. loads and stores are
mixed up with cache event So they have to be hardcode in lex.
PE_PMU_EVENT_PRE and PE_PMU_EVENT_SUF tokens are for other PMU events.
The lex looks generic identifier up in the table and return the matched
token. If there is no match, generic PE_NAME token will be return.
Using the rules, kernel PMU event could use new style format without //
so you can use:
perf record -e mem-loads ...
instead of:
perf record -e cpu/mem-loads/
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1412694532-23391-4-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are two types of event formats for PMU events. E.g. el-abort OR
cpu/el-abort/. However, the lexer mistakenly recognizes the simple style
format as two events.
The parse_events_pmu_check function uses bsearch to search the name in
known pmu event list. It can tell the lexer that the name is a PE_NAME
or a PMU event name prefix or a PMU event name suffix. All these
information will be used for accurately parsing kernel PMU events.
The pmu events list will be read from sysfs at runtime.
Note: Currently, the patch only want to handle the PMU event name as
"a-b" and "a". The only exception, "stalled-cycles-frontend" and
"stalled-cycles-fronted", are already hardcoded in lexer.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1412694532-23391-3-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This reverts commit 50e200f079 ("perf tools: Default to cpu// for
events v5")
The fixup cannot handle the case that
new style format(which without //) mixed with
other different formats.
For example,
group events with new style format: {mem-stores,mem-loads}
some hardware event + new style event: cycles,mem-loads
Cache event + new style event: LLC-loads,mem-loads
Raw event + new style event:
cpu/event=0xc8,umask=0x08/,mem-loads
old style event and new stytle mixture: mem-stores,cpu/mem-loads/
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1412694532-23391-2-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When 'perf top' is run, one can't easily find a difference
between -z option and normal output.
So I added a visual cue to know whether it is the zeroing or not.
Output is as below.
Before:
$ perf top
Samples: 61K of event 'cycles', Event count (approx.): 3908136933
Overhead Shared Object Symbol
1.42% firefox [.] 0x0000000000011e76
1.32% libpthread-2.17.so [.] pthread_mutex_lock
If you press key 'z' or run with zero option like '$ perf top --zero', it is as below.
After:
Samples: 61K of event 'cycles', Event count (approx.): 3908136933 [z]
Overhead Shared Object Symbol
1.42% firefox [.] 0x0000000000011e76
1.32% libpthread-2.17.so [.] pthread_mutex_lock
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1412665995-26359-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Infrastructure:
. Do not include a struct hists per perf_evsel, untangling the histogram code
from perf_evsel, to pave the way for exporting a minimalistic
tools/lib/api/perf/ library usable by tools/perf and initially by the rasd
daemon being developed by Borislav Petkov, Robert Richter and Jean Pihet.
(Arnaldo Carvalho de Melo)
. Make perf_evlist__open(evlist, NULL, NULL), i.e. without cpu and thread
maps mean syswide monitoring, reducing the boilerplate for tools that
only want system wide mode. (Arnaldo Carvalho de Melo)
. Fix off-by-one bugs in map->end handling (Stephane Eranian)
. Fix off-by-one bug in maps__find(), also related to map->end handling (Namhyung Kim)
. Make struct symbol->end be the first addr after the symbol range, to make it
match the convention used for struct map->end. (Arnaldo Carvalho de Melo)
. Fix perf_evlist__add_pollfd() error handling in 'perf kvm stat live' (Jiri Olsa)
. Fix python test build by moving callchain_param to an object linked into the
python binding (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=kM2R
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
Infrastructure fixes and changes:
* Fix off-by-one bugs in map->end handling (Stephane Eranian)
* Fix off-by-one bug in maps__find(), also related to map->end handling (Namhyung Kim)
* Make struct symbol->end be the first addr after the symbol range, to make it
match the convention used for struct map->end. (Arnaldo Carvalho de Melo)
* Fix perf_evlist__add_pollfd() error handling in 'perf kvm stat live' (Jiri Olsa)
* Fix python test build by moving callchain_param to an object linked into the
python binding (Jiri Olsa)
* Do not include a struct hists per perf_evsel, untangling the histogram code
from perf_evsel, to pave the way for exporting a minimalistic
tools/lib/api/perf/ library usable by tools/perf and initially by the rasd
daemon being developed by Borislav Petkov, Robert Richter and Jean Pihet.
(Arnaldo Carvalho de Melo)
* Make perf_evlist__open(evlist, NULL, NULL), i.e. without cpu and thread
maps mean syswide monitoring, reducing the boilerplate for tools that
only want system wide mode. (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
To follow vm_area_struct->vm_end convention.
By adhering to the convention that ->end is the first address outside
the symbol's range we can do things like:
sym->end = start + len;
len = sym->end - sym->start;
This is also now the convention used for struct map->end, fixing some
off-by-one bugs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chuck Ebbert <cebbert.lkml@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-agomujr7tuqaq6lu7kr6z7h6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When synthesizing maps from files that have incomplete symbol
information, like kallsyms, we need to fixup the end of maps by seting
its end from the ->start of the next map, fix it to set prev_map->end to
curr_map->start, since ->end is the first byte outside prev_map address
range.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ivbrj08sjakxdwkrcndbkoig@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
map->end is the first addr _outside_ the a map, following the convention
of vm_area_struct->vm_end.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/8761fwh1nc.fsf@sejong.aot.lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fixes off-by-one errors in the management of maps.
A map is defined by start address and length as implemented by
map__new():
map__init(map, type, start, start + len, pgoff, dso);
map->start = addr;
map->end = end;
Consequently, the actual address range is [start; end[ map->end is the
first byte outside the range.
This patch fixes two bugs where upper bound checking was off-by-one.
In V2, we fix map_groups__fixup_overlappings() some more where
map->start was off-by-one as reported by Jiri.
Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20141006083532.GA4850@quad
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A segfault happens on 'perf test hists_link' because we end up using a
struct machines on the stack, and then machines__init() was not
initializing the newly introduced rb_root, just the existing list_head.
When we introduced struct dsos, to group the two ways to store dsos,
i.e. the linked list and the rbtree, we didn't turned the initialization
done in:
machines__init(machines->host) ->
machine__init() ->
INIT_LIST_HEAD
into a dsos__init() to keep on initializing the list_head but _as well_
initializing the rb_root, oops.
All worked because outside perf-test we probably zalloc the whole thing
which ends up initializing it in to NULL.
So the problem looks contained to 'perf test' that uses it on stack,
etc.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Waiman Long <Waiman.Long@hp.com>,
Cc: Adrian Hunter <adrian.hunter@intel.com>,
Cc: Don Zickus <dzickus@redhat.com>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Waiman Long <Waiman.Long@hp.com>,
Link: http://lkml.kernel.org/r/20141014180353.GF3198@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since they are automatically called by other methods used by tools.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ne3g4any7q6ty5d6yv8t1wws@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We use it in evsel.h but were getting it indirectly, fix it.
Noticed while working on having evsel.h usable by rasd.c.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-94t3jvw4tmzrq3dnovvpl65e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If all a tool wants is to do system wide event monitoring, there is no
more the need to setup thread_map and cpu_map objects, just call
perf_evlist__open() and it will do create one fd per CPU monitoring all
threads.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-poovolkigu72brx4783uq4cf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_evlist__prepare_workload expects a thread map to be in place
so that it can store the pid of the workload being started, so check it
and tell the developer about it instead of segfaulting.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-jvlz2f264e7kpmhjmwltikqw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Create a dummy thread_map, one that has just one entry and it is -1,
meaning 'all threads', as this ends up going down to perf_event_open().
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8av26cz8uxmbnihl5mmrygp9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now tools that deals want to have an hists per evsel need to call
hists__init() before creating any evsels, which can be as early as when
parsing the command line, so do it before calling parse_options().
The current tools using hists/hist_entries are report, top and annotate,
change them to request per evsel hists.
This is in preparation for making evsels usable by 3rd party tools, that
not necessarily live in perf's source code repository.
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-usjx2la743f10ippj7p1b20x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was lost in hist.h, move it to where it belongs, callchain.h, as
there are places that gets hist.h by means of evsel.h, and since evsel.h
is being untangled from hist.h...
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0rg7ji1jnbm6q6gj35j37jby@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Provide a method to be called at tool start to config the perf_evsel
instance size, together with optional constructor and destructor.
This will be used so that perf_evsel doesn't always include a struct
hists, tools that works with hists/hist_entries, like report, top and
annotate, will, at start, tell the evsel class the size they need per
instance.
v2: Don't use exit as a name of a member of function parameter, as this
breaks the build on at least fedora14 and rhel6.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-7t8cay0ieryox4gqosie85ek@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now perf_session doesn't require that the evsels in its evlist are hists
containing ones.
Tools that are hists based and want to do per evsel events_stats
updates, if at some point this turns into a necessity, should do it in
the tool specific code, keeping the session class hists agnostic.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-cli1bgwpo82mdikuhy3djsuy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf updates from Ingo Molnar:
"Kernel side updates:
- Fix and enhance poll support (Jiri Olsa)
- Re-enable inheritance optimization (Jiri Olsa)
- Enhance Intel memory events support (Stephane Eranian)
- Refactor the Intel uncore driver to be more maintainable (Zheng
Yan)
- Enhance and fix Intel CPU and uncore PMU drivers (Peter Zijlstra,
Andi Kleen)
- [ plus various smaller fixes/cleanups ]
User visible tooling updates:
- Add +field argument support for --field option, so that one can add
fields to the default list of fields to show, ie now one can just
do:
perf report --fields +pid
And the pid will appear in addition to the default fields (Jiri
Olsa)
- Add +field argument support for --sort option (Jiri Olsa)
- Honour -w in the report tools (report, top), allowing to specify
the widths for the histogram entries columns (Namhyung Kim)
- Properly show submicrosecond times in 'perf kvm stat' (Christian
Borntraeger)
- Add beautifier for mremap flags param in 'trace' (Alex Snast)
- perf script: Allow callchains if any event samples them
- Don't truncate Intel style addresses in 'annotate' (Alex Converse)
- Allow profiling when kptr_restrict == 1 for non root users, kernel
samples will just remain unresolved (Andi Kleen)
- Allow configuring default options for callchains in config file
(Namhyung Kim)
- Support operations for shared futexes. (Davidlohr Bueso)
- "perf kvm stat report" improvements by Alexander Yarygin:
- Save pid string in opts.target.pid
- Enable the target.system_wide flag
- Unify the title bar output
- [ plus lots of other fixes and small improvements. ]
Tooling infrastructure changes:
- Refactor unit and scale function parameters for PMU parsing
routines (Matt Fleming)
- Improve DSO long names lookup with rbtree, resulting in great
speedup for workloads with lots of DSOs (Waiman Long)
- We were not handling POLLHUP notifications for event file
descriptors
Fix it by filtering entries in the events file descriptor array
after poll() returns, refcounting mmaps so that when the last fd
pointing to a perf mmap goes away we do the unmap (Arnaldo Carvalho
de Melo)
- Intel PT prep work, from Adrian Hunter, including:
- Let a user specify a PMU event without any config terms
- Add perf-with-kcore script
- Let default config be defined for a PMU
- Add perf_pmu__scan_file()
- Add a 'perf test' for tracking with sched_switch
- Add 'flush' callback to scripting API
- Use ring buffer consume method to look like other tools (Arnaldo
Carvalho de Melo)
- hists browser (used in top and report) refactorings, getting rid of
unused variables and reducing source code size by handling similar
cases in a fewer functions (Namhyung Kim).
- Replace thread unsafe strerror() with strerror_r() accross the
whole tools/perf/ tree (Masami Hiramatsu)
- Rename ordered_samples to ordered_events and allow setting a queue
size for ordering events (Jiri Olsa)
- [ plus lots of fixes, cleanups and other improvements ]"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (198 commits)
perf/x86: Tone down kernel messages when the PMU check fails in a virtual environment
perf/x86/intel/uncore: Fix minor race in box set up
perf record: Fix error message for --filter option not coming after tracepoint
perf tools: Fix build breakage on arm64 targets
perf symbols: Improve DSO long names lookup speed with rbtree
perf symbols: Encapsulate dsos list head into struct dsos
perf bench futex: Sanitize -q option in requeue
perf bench futex: Support operations for shared futexes
perf trace: Fix mmap return address truncation to 32-bit
perf tools: Refactor unit and scale function parameters
perf tools: Fix line number in the config file error message
perf tools: Convert {record,top}.call-graph option to call-graph.record-mode
perf tools: Introduce perf_callchain_config()
perf callchain: Move some parser functions to callchain.c
perf tools: Move callchain config from record_opts to callchain_param
perf hists browser: Fix callchain print bug on TUI
perf tools: Use ACCESS_ONCE() instead of volatile cast
perf tools: Modify error code for when perf_session__new() fails
perf tools: Fix perf record as non root with kptr_restrict == 1
perf stat: Fix --per-core on multi socket systems
...
Pull RCU updates from Ingo Molnar:
"The main changes in this cycle were:
- changes related to No-CBs CPUs and NO_HZ_FULL
- RCU-tasks implementation
- torture-test updates
- miscellaneous fixes
- locktorture updates
- RCU documentation updates"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits)
workqueue: Use cond_resched_rcu_qs macro
workqueue: Add quiescent state between work items
locktorture: Cleanup header usage
locktorture: Cannot hold read and write lock
locktorture: Fix __acquire annotation for spinlock irq
locktorture: Support rwlocks
rcu: Eliminate deadlock between CPU hotplug and expedited grace periods
locktorture: Document boot/module parameters
rcutorture: Rename rcutorture_runnable parameter
locktorture: Add test scenario for rwsem_lock
locktorture: Add test scenario for mutex_lock
locktorture: Make torture scripting account for new _runnable name
locktorture: Introduce torture context
locktorture: Support rwsems
locktorture: Add infrastructure for torturing read locks
torture: Address race in module cleanup
locktorture: Make statistics generic
locktorture: Teach about lock debugging
locktorture: Support mutexes
locktorture: Add documentation
...
