While trying to debug a SMB signature related issue with Windows Servers
figured out it might be easier to debug if we print the error code from
cifs_verify_signature(). Also, fix indendation while at it.
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Split all requests to echos, oplocks and others - each group uses
its own credit slot. This is indicated by new flags
CIFS_ECHO_OP and CIFS_OBREAK_OP
that are not used now for CIFS. This change is required to support
SMB2 protocol because of different processing of these commands.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
"smb2" makes me think of the SMB2.x protocol, which isn't at all what
this function is for...
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
There's a comment here about how we don't want to modify this length,
but nothing in this function actually does.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
A user reported a crash in cifs_demultiplex_thread() caused by an
incorrectly set mid_q_entry->callback() function. It appears that the
callback assignment made in cifs_call_async() was not flushed back to
memory suggesting that a memory barrier was required here. Changing the
code to make sure that the mid_q_entry structure was completely
initialised before it was added to the pending queue fixes the problem.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
For SMB2, this should be a no-op. Obviously if we wanted to do something
for the SMB2 case, we could also define an operation here for it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
that is essential for CIFS/SMB/SMB2 oplock breaks and SMB2 echos.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
to let us kill the proccess if it hangs waiting for a credit when
the session is down and echo is disabled.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
and send no more than credits value requests at once. For SMB/CIFS
it's trivial: increment this value by receiving any message and
decrement by sending one.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
by making it as unsigned integer and surround access with req_lock
from server structure.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Some servers sets this value less than 50 that was hardcoded and
we lost the connection if when we exceed this limit. Fix this by
respecting this value - not sending more than the server allows.
Cc: stable@kernel.org
Reviewed-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <stevef@smf-gateway.(none)>
CIFS currently uses wait_event_killable to put tasks to sleep while
they await replies from the server. That function though does not
allow the freezer to run. In many cases, the network interface may
be going down anyway, in which case the reply will never come. The
client then ends up blocking the computer from suspending.
Fix this by adding a new wait_event_freezable variant --
wait_event_freezekillable. The idea is to combine the behavior of
wait_event_killable and wait_event_freezable -- put the task to
sleep and only allow it to be awoken by fatal signals, but also
allow the freezer to do its job.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
In order to handle larger SMBs for readpages and other calls, we want
to be able to read into a preallocated set of buffers. Rather than
changing all of the existing code to preallocate buffers however, we
instead add a receive callback function to the MID.
cifsd will call this function once the mid_q_entry has been identified
in order to receive the rest of the SMB. If the mid can't be identified
or the receive pointer is unset, then the standard 3rd phase receive
function will be called.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
We have two versions of signature generating code. A vectorized and
non-vectorized version. Eliminate a large chunk of cut-and-paste
code by turning the non-vectorized version into a wrapper around the
vectorized one.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Christoph had requested that the stats related code (in
CONFIG_CIFS_STATS2) be moved into helpers to make code flow more
readable. This patch should help. For example the following
section from transport.c
spin_unlock(&GlobalMid_Lock);
atomic_inc(&ses->server->num_waiters);
wait_event(ses->server->request_q,
atomic_read(&ses->server->inFlight)
< cifs_max_pending);
atomic_dec(&ses->server->num_waiters);
spin_lock(&GlobalMid_Lock);
becomes simpler (with the patch below):
spin_unlock(&GlobalMid_Lock);
cifs_num_waiters_inc(server);
wait_event(server->request_q,
atomic_read(&server->inFlight)
< cifs_max_pending);
cifs_num_waiters_dec(server);
spin_lock(&GlobalMid_Lock);
Reviewed-by: Jeff Layton <jlayton@redhat.com>
CC: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
if we failed on getting mid entry in cifs_call_async.
Cc: stable@kernel.org
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Minor revision to the last version of this patch -- the only difference
is the fix to the cFYI statement in cifs_reconnect.
Holding the spinlock while we call this function means that it can't
sleep, which really limits what it can do. Taking it out from under
the spinlock also means less contention for this global lock.
Change the semantics such that the Global_MidLock is not held when
the callback is called. To do this requires that we take extra care
not to have sync_mid_result remove the mid from the list when the
mid is in a state where that has already happened. This prevents
list corruption when the mid is sitting on a private list for
reconnect or when cifsd is coming down.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The current code always ignores the max_pending limit. Have it instead
only optionally ignore the pending limit. For CIFSSMBEcho, we need to
ignore it to make sure they always can go out. For async reads, writes
and potentially other calls, we need to respect it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
We'll need this for async writes, so convert the call to take a kvec
array. CIFSSMBEcho is changed to put a kvec on the stack and pass
in the SMB buffer using that.
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Further consolidate the SendReceive code by moving the checks run over
the packet into a separate function that all the SendReceive variants
can call.
We can also eliminate the check for a receive_len that's too big or too
small. cifs_demultiplex_thread already checks that and disconnects the
socket if that occurs, while setting the midStatus to MALFORMED. It'll
never call this code if that's the case.
Finally do a little cleanup. Use "goto out" on errors so that the flow
of code in the normal case is more evident. Also switch the logErr
variable in map_smb_to_linux_error to a bool.
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
This is the same patch as originally posted, just with some merge
conflicts fixed up...
Currently, the ByteCount is usually converted to host-endian on receive.
This is confusing however, as we need to keep two sets of routines for
accessing it, and keep track of when to use each routine. Munging
received packets like this also limits when the signature can be
calulated.
Simplify the code by keeping the received ByteCount in little-endian
format. This allows us to eliminate a set of routines for accessing it
and we can now drop the *_le suffixes from the accessor functions since
that's now implied.
While we're at it, switch all of the places that read the ByteCount
directly to use the get_bcc inline which should also clean up some
unaligned accesses.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
There is one big endian field in the cifs protocol, the RFC1001
length, which cifs code (unlike in the smb2 code) had been handling as
u32 until the last possible moment, when it was converted to be32 (its
native form) before sending on the wire. To remove the last sparse
endian warning, and to make this consistent with the smb2
implementation (which always treats the fields in their
native size and endianness), convert all uses of smb_buf_length to
be32.
This version incorporates Christoph's comment about
using be32_add_cpu, and fixes a typo in the second
version of the patch.
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Slight revision to this patch...use min_t() instead of conditional
assignment. Also, remove the FIXME comment and replace it with the
explanation that Steve gave earlier.
After receiving a packet, we currently check the header. If it's no
good, then we toss it out and continue the loop, leaving the caller
waiting on that response.
In cases where the packet has length inconsistencies, but the MID is
valid, this leads to unneeded delays. That's especially problematic now
that the client waits indefinitely for responses.
Instead, don't immediately discard the packet if checkSMB fails. Try to
find a matching mid_q_entry, mark it as having a malformed response and
issue the callback.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs_sign_smb only generates a signature if the correct Flags2 bit is
set. Make sure that it gets set correctly if we're sending an async
call.
This patch fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=28142
Reported-and-Tested-by: JG <jg@cms.ac>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
If we kill the process while it's sending on a socket then the
kernel_sendmsg will return -EINTR. This is normal. No need to spam the
ring buffer with this info.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Use the new send_nt_cancel function to send an NT_CANCEL when the
process is delivered a fatal signal. This is a "best effort" enterprise
however, so don't bother to check the return code. There's nothing we
can reasonably do if it fails anyway.
Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Currently, when a request is cancelled via signal, we delete the mid
immediately. If the request was already transmitted however, the client
is still likely to receive a response. When it does, it won't recognize
it however and will pop a printk.
It's also a little dangerous to just delete the mid entry like this. We
may end up reusing that mid. If we do then we could potentially get the
response from the first request confused with the later one.
Prevent the reuse of mids by marking them as cancelled and keeping them
on the pending_mid_q list. If the reply comes in, we'll delete it from
the list then. If it never comes, then we'll delete it at reconnect
or when cifsd comes down.
Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
It's possible that when we access the ByteCount that the alignment
will be off. Most CPUs deal with that transparently, but there's
usually some performance impact. Some CPUs raise an exception on
unaligned accesses.
Fix this by accessing the byte count using the get_unaligned and
put_unaligned inlined functions. While we're at it, fix the types
of some of the variables that end up getting returns from these
functions.
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The NT_CANCEL command looks just like the original command, except for a
few small differences. The send_nt_cancel function however currently takes
a tcon, which we don't have in SendReceive and SendReceive2.
Instead of "respinning" the entire header for an NT_CANCEL, just mangle
the existing header by replacing just the fields we need. This means we
don't need a tcon and allows us to call it from other places.
Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Since we don't time out individual requests anymore, remove the code
that we used to use for setting timeouts on different requests.
Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Add a function that will send a request, and set up the mid for an
async reply.
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
In order to incorporate async requests, we need to allow for a more
general way to do things on receive, rather than just waking up a
process.
Turn the task pointer in the mid_q_entry into a callback function and a
generic data pointer. When a response comes in, or the socket is
reconnected, cifsd can call the callback function in order to wake up
the process.
The default is to just wake up the current process which should mean no
change in behavior for existing code.
Also, clean up the locking in cifs_reconnect. There doesn't seem to be
any need to hold both the srv_mutex and GlobalMid_Lock when walking the
list of mids.
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Make it use a switch statement based on the value of the midStatus. If
the resp_buf is set, then MID_RESPONSE_RECEIVED is too.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
We only want to force a reconnect to the server under very limited and
specific circumstances. Now that we have processes waiting indefinitely
for responses, we shouldn't reach this point unless a reconnect is
already in process. Thus, there's no reason to re-mark the server for
reconnect here.
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The client should not be timing out on individual SMB requests. Too much
of the state between client and server is tied to the state of the
socket. If we time out requests and issue spurious disconnects then that
comprimises data integrity.
Instead of doing this complicated dance where we try to decide how long
to wait for a response for particular requests, have the client instead
wait indefinitely for a response. Also, use a TASK_KILLABLE sleep here
so that fatal signals will break out of this waiting.
Later patches will add support for detecting dead peers and forcing
reconnects based on that.
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
In later patches, we're going to need to have finer-grained control
over the addition and removal of these structs from the pending_mid_q
and we'll need to be able to call the destructor while holding the
spinlock. Move the locked sections out of both routines and into
the callers. Fix up current callers of DeleteMidQEntry to call a new
routine that dequeues the entry and then destroys it.
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
It's an atomic_t and the code accesses the "counter" field in it directly
instead of using atomic_read(). It also is sometimes accessed under a
spinlock and sometimes not. Move it out of the spinlock since we don't need
belt-and-suspenders for something that's just informational.
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The cifsSesInfo pointer is only used to get at the server.
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Make connect logic more ip-protocol independent and move RFC1001 stuff into
a separate function. Also replace union addr in TCP_Server_Info structure
with sockaddr_storage.
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-and-Tested-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
