a trans_start struct member exists twice:
- in struct net_device (legacy)
- in struct netdev_queue
Instead of open-coding dev->trans_start usage to obtain the current
trans_start value, use dev_trans_start() instead.
This is not exactly the same, as dev_trans_start also considers
the trans_start values of the netdev queues owned by the device
and provides the most recent one.
For legacy devices this doesn't matter as dev_trans_start can cope
with netdev trans_start values of 0 (they are ignored).
This is a prerequisite to eventual removal of dev->trans_start.
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the big staging driver pull request for 4.6-rc1.
Lots of little things here, over 1600 patches or so. Notible is all of
the good Lustre work happening, those developers have finally woken up
and are cleaning up their code greatly. The Outreachy intern
application process is also happening, which brought in another 400 or
so patches. Full details are in the very long shortlog.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlbrc3EACgkQMUfUDdst+ylu5ACgpdTKjrZn2vHElW3GRhTpzJdQ
wz8AoJDeur2DmBkQrKD5/u/WL4UTRNZJ
=+Q6N
-----END PGP SIGNATURE-----
Merge tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big staging driver pull request for 4.6-rc1.
Lots of little things here, over 1600 patches or so. Notable is all
of the good Lustre work happening, those developers have finally woken
up and are cleaning up their code greatly. The Outreachy intern
application process is also happening, which brought in another 400 or
so patches. Full details are in the very long shortlog.
All of these have been in linux-next with no reported issues"
* tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1673 commits)
staging: lustre: fix aligments in lnet selftest
staging: lustre: report minimum of two buffers for LNet selftest load test
staging: lustre: test for proper errno code in lstcon_rpc_trans_abort
staging: lustre: filter remaining extra spacing for lnet selftest
staging: lustre: remove extra spacing when setting variable for lnet selftest
staging: lustre: remove extra spacing of variable declartions for lnet selftest
staging: lustre: fix spacing issues checkpatch reported in lnet selftest
staging: lustre: remove returns in void function for lnet selftest
staging: lustre: fix bogus lst errors for lnet selftest
staging: netlogic: Replacing pr_err with dev_err after the call to devm_kzalloc
staging: mt29f_spinand: Replacing pr_info with dev_info after the call to devm_kzalloc
staging: android: ion: fix up file mode
staging: ion: debugfs invalid gfp mask
staging: rts5208: Replace pci_enable_device with pcim_enable_device
Staging: ieee80211: Place constant on right side of the test.
staging: speakup: Replace del_timer with del_timer_sync
staging: lowmemorykiller: fix 2 checks that checkpatch complained
staging: mt29f_spinand: Drop void pointer cast
staging: rdma: hfi1: file_ops: Replace ALIGN with PAGE_ALIGN
staging: rdma: hfi1: driver: Replace IS_ALIGNED with PAGE_ALIGNED
...
This patch fixes the checkpatch warning that else is not generally
useful after a break or return.
This was done using Coccinelle:
@@
expression e2;
statement s1;
@@
if(e2) { ... return ...; }
-else
s1
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro random_ether_addr is calling the function eth_random_addr.
Therefore, the call to random_ether_addr can be replaced with
eth_random_addr.
Remove the wrapper function rtllib_randomize_cell and replace its
call with eth_random_addr as it is wrapping random_ether_addr.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With conccurency managed workqueues, use of dedicated workqueues can
be replaced by system_wq. Drop priv_wq by using system_wq.
Since there are multiple work items per priv but they do not need
to be ordered, increase of concurrency by switching to system_wq
should not break anything.
All work items are sync canceled on so it is guaranteed that
no work is running when rtl92e_suspend function is called.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed checkpatch.pl issue 'Blank lines aren't necessary before a close
brace'
Signed-off-by: Tapan Prakash T <tapanprakasht@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With conccurency managed workqueues, use of dedicated workqueues can
be replaced by system_wq. Drop wq by using system_wq.
Since there are multiple work items per rtllib but they do not need to
be ordered, increase of concurrency by switching to system_wq should
not break anything.
All work items are sync canceled on rtllib_stop_protocol() so it is
guaranteed that no work is running when rtl92e_disable/reset/restart
functions are called.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed initialisation of a varible if it is immediately reassigned.
Changes were made using Coccinelle.
@@
type T;
constant C;
expression e;
identifier i;
@@
T i
- = C
;
i = e;
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In this file, the values returned by rtllib_priv() are unnecessarily cast
into a pointer type in some assignment statements. Remove the cast as it
is unneeded.
Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prefer using the eth_broadcast_addr() instead of memset to broadcast
address 0xFF to the array.
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use to_delayed_work() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes a couple of issues detected by checkpatch with regard to blank lines.
Signed-off-by: Amadeusz Pawlik <potrzebye@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rtllib driver is not calling try_module_get() when loading the
encryption modules. Because of this, you can never remove the module
once you have used it one (i.e. bring up the wireless interface).
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Tested-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The interfaces blkcipher and hash are obsolete. This patch replaces
them with skcipher and ahash respectively.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes unnecessary variable by using a single line of code
instead.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop ugly label as no resource cleanup is needed.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove endian swap from _rtl92e_fw_download_code(),
this way it can be replaced with _rtl92e_send_cmd_pkt().
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add function waiting for firmware load/boot;
Remove _rtl92e_is_fw_ready() that is obsolete (can be replaced
with _rtl92e_wait_for_fw().
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rst_opt is always equal to OPT_SYSTEM_RESET in this scope.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for DESC_PACKET_TYPE_INIT to rtl92e_send_cmd_pkt().
With this generalization, _rtl92e_fw_download_code() may be removed
after slight modification.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add CMDPACKET_FRAG_SIZE macro and use it as fragmentation threshold
in send_cmd_pkt functions.
This makes rt_firmware::cmdpacket_frag_thresold and
rtl92e_init_fw_param() obsolete.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use send_cmd_pkt(dev, type, data , size) order to avoid confusion
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtl92e_send_cmd_pkt used hardcoded NORMAL packet type.
As it may be used to send other packet types as well - use
provided packet type instead of defaults.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtl92e_send_cmd_packet sends only NORMAL packets, passing
invalid type (even it it's ignored) is confusing.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use module_pci_driver for drivers whose init and exit functions only
register and unregister, respectively.
Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Explicit type conversion is not required to remove it.
Semantic patch used:
@@
type T;
T e;
identifier x;
@@
* T x = (T)e;
Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The advantage of kcalloc is, that will prevent integer overflows which
could result from the multiplication of number of elements and size and
it is also a bit nicer to read.
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wstats->qual.noise is of type uint8, so it shouldn't be assigned a
negative number. Assigning it 0x100 - 100, which is the equivalent
to -100 dBm when IW_QUAL_DBM is set.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Tested-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge rtl92e_dm_backup_state and _rtl92e_dm_bb_initialgain_backup.
Static function is called only once and dm_backup_state had short body.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use ffs instead of iteration. Behaviour of function doesn't change.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove FSF address from licenses at the beginning of files.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use naming schema found in other rtlwifi devices.
Rename dm_ctrl_initgain_byrssi to _rtl92e_dm_ctrl_initgain_byrssi.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
