Use put_device to release the object get through of_find_device_by_node,
avoiding resource leaks.
Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.c:627:34: error: ‘mdp_sub_comp_dt_ids’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here). This
also fixes !CONFIG_OF error:
drivers/media/platform/mediatek/mdp3/mtk-mdp3-core.c:49:34: error: ‘mdp_of_ids’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The iterator for_each_child_of_node() increments the refcount of the
child node it is processing. Release such a reference when the loop
needs to break due to an error during its execution.
Issue identified using for_each_child.cocci Coccinelle semantic patch.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
When CONFIG_OF is disabled, the 'data' variable is not used at all
because of_match_node() turns into a dummy macro:
drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.c: In function 'mdp_comp_sub_create':
drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.c:1038:36: error: unused variable 'data' [-Werror=unused-variable]
1038 | const struct mtk_mdp_driver_data *data = mdp->mdp_data;
| ^~~~
Remove the variable again by moving the pointer dereference into the
of_match_node call.
Fixes: b385b991ef ("media: platform: mtk-mdp3: chip config split about subcomponents")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The communication between the MDP3 kernel driver and SCP is to
pass a shared memory through the cooperation of "mtk-mdp3-vpu.c" and
remoteproc driver.
The data structure of this shared memory is defined in "mtk-img-ipi.h",
as shown below:
vpu->work_addr -> +-----------------------------------------+
| |
| To SCP : Input frame parameters |
| (struct img_ipi_frameparam) |
| |
vpu->pool -> +-----------------------------------------+
| |
| From SCP : Output component config pool |
| (struct img_config) |
| |
| *struct img_config 1 |
| | |
| | |
| v |
| *struct img_config N |
| (N = MDP_CONFIG_POOL_SIZE) |
+-----------------------------------------+
One output component configuration contains the components
currently used by the pipeline, and has the register settings
that each component needs to set.
Since the quantity, type and function of components on each chip
will vary, the effect is that the size of the "struct img_config"
and its substructures will be different on each chip.
In addition, all chips will have to update their SCP firmware for
every change if the output component config structure is defined
and shared by a common header.
Therefore, all functions that operate on "struct img_config" and
its substructures must be separated by chips and so are the
relevant definations.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Separate the generic definitions used in MDP3 to avoid recursive includes
when splitting chip-related definitions in further.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
For extensibility of adding more MDP3 components in the further, the
magic number is removed by dynamically allocating component clocks.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Due to future support for hardware compression formats, the MDP3
internal color format expression needs to be extended.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In MDP3, a pipe is used to represent a data path which
consisting of different components and MUTEX, as shown in
the following diagram:
+----------------------------+
| MUTEX [*1] |
+----------------------------+
S ^ S ^ S ^ S ^ S ^
| | | | | | | | | |
| | | | | | | | | |
+--------------+ | | | | | | | | +-------------+
| +--------------+ | | | | | | +-------------+ |
| | +------+ | | | | +------+ | |
| | | +------+ | | +------+ | | |
| | | | | | | | | |
| | | | | | | | | |
v E v E v E v E v E
+-------+ +-----+ +-------+ +-----+ +-------+
B>--->| RDMA0 |>-->| PQ |>-->| RSZ0 |>-->| PQ |>-->| WROT0 |>-->B
+-------+ +-----+ +-------+ +-----+ +-------+
[*1] MUTEX is SOF/EOF signal controller
[*2] S = Start of frame (SOF)
[*3] E = End of frame (EOF)
[*4] B = frame buffer
More pipes will be introduced in future chips for applications such as
higher frame rate frequency, which should integrate and reorder related
information into specific chip config file.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Due to differences in hardware design, the supported max and min
resolutions and scaling capabilities will vary, and should be
integrated into specific config file.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Due to differences in hardware design, the supported color formats
will vary and should be integrated into specific config file.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Integrate subcomponent related information into specific config file for
further multi-chip compatibility.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
For different chips, different types and numbers of components are
configured in the MDP3 to achieve the desired application, which will
cause ID compatibility problems in the same driver.
Subdivide the component ID into two kinds:
1. public_id (compatible with other chips)
2. inner_id (what the current chip actually owns)
In addition, the chip configuration related structures of MDP3 components
are integrated into specific file.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In order to be compatible with more MDP3 chip settings in further,
integrate and separate chip-related configurations into specific files.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add the check for the return value of the ida_alloc in order to avoid
NULL pointer dereference.
Moreover, free allocated "ctx->id" if mdp_m2m_open fails later in order
to avoid memory leak.
Fixes: 61890ccaef ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
An error was returned at one point without going through the
goto label for proper unwinding.
This fixes a smatch warning:
mtk-mdp3-comp.c:1005 mdp_comp_config() warn: missing unwind goto?
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Moudy Ho <moudy.ho@mediatek.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The new mdp3 driver uses 'select' to force-enable a couple of drivers
it depends on. This is error-prone and likely to cause dependency
loops as well as warnings like:
WARNING: unmet direct dependencies detected for VIDEO_MEDIATEK_VPU
Depends on [n]: MEDIA_SUPPORT [=m] && MEDIA_PLATFORM_SUPPORT [=y] && MEDIA_PLATFORM_DRIVERS [=y] && V4L_MEM2MEM_DRIVERS [=n] && VIDEO_DEV [=m] && (ARCH_MEDIATEK [=y] || COMPILE_TEST [=y])
Selected by [m]:
- VIDEO_MEDIATEK_MDP3 [=m] && MEDIA_SUPPORT [=m] && MEDIA_PLATFORM_SUPPORT [=y] && MEDIA_PLATFORM_DRIVERS [=y] && (MTK_IOMMU [=m] || COMPILE_TEST [=y]) && VIDEO_DEV [=m] && (ARCH_MEDIATEK [=y] || COMPILE_TEST [=y]) && HAS_DMA [=y] && REMOTEPROC [=y]
This specific warning was already addressed in a previous patch,
but there are similar unnecessary 'select' statements, so turn those
into 'depends on'. This also means the dependency on ARCH_MEDIATEK
is redundant and can be dropped.
Fixes: 61890ccaef ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Fixes: 9195a860ef ("media: platform: mtk-mdp3: remove unused VIDEO_MEDIATEK_VPU config")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In case of error, the function mtk_mutex_get()
returns ERR_PTR() and never returns NULL. The NULL test in the
return value check should be replaced with IS_ERR().
And also fix the err_free_mutex case.
Fixes: 61890ccaef ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Adjust label "err_return" order to avoid double freeing, and
add two labels for easy traceability.
Fixes: 61890ccaef ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add goto statement in mdp_comp_clock_on() to avoid error code not being
propagated or returning positive values.
This change also performs a well-timed clock_off when an error occurs, and
reduces unnecessary error logging in mdp_cmdq_send().
Fixes: 61890ccaef ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Increase and refine the goto label in mdp_cmdq_send() to avoid
double free and facilitate traceability.
Also, remove redundant work queue event in blocking function
mdp_cmdq_send().
Fixes: 61890ccaef ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The communication between MDP3 kernel driver and SCP is pass through
a shared memory, and the data structure is defined in the "mtk-img-ipi.h".
However, there is a 4-byte read limit in further SCP hardware, so the
data structure should be in 4-byte aligned.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
mdp_comp_clock_on will increase runtime PM usage counter,
and mdp_comp_clock_off will decrease the runtime PM usage counter.
so, if mdp_comp_clock_on failed after increment runtime PM usage
counter, it should decrease it before return a error code.
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.
And if failed to enable clk, add pm_runtime_put() to decrease the
runtime PM usage counter.
Fixes: 61890ccaef ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Sun Ke <sunke32@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fix two errors reported by smatch:
drivers/media/platform/mediatek/mdp3/mtk-mdp3-core.c:292
mdp_probe() error: we previously assumed 'mdp' could be null
drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c:460
mdp_cmdq_send() error: we previously assumed 'cmd' could be null
Also, avoid warnings reported by smatch:
drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.c:872
mdp_comp_create() warn: passing devm_ allocated variable to kfree. 'comp'
[hverkuil: fix devm_kfree call]
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This patch adds driver for MediaTek's Media Data Path ver.3 (MDP3).
It provides the following functions:
color transform, format conversion, resize, crop, rotate, flip
and additional image quality enhancement.
The MDP3 driver is mainly used for Google Chromebook products to
import the new architecture to set the HW settings as shown below:
User -> V4L2 framework
-> MDP3 driver -> SCP (setting calculations)
-> MDP3 driver -> CMDQ (GCE driver) -> HW
Each modules' related operation control is sited in mtk-mdp3-comp.c
Each modules' register table is defined in file with "mdp_reg_" prefix
GCE related API, operation control sited in mtk-mdp3-cmdq.c
V4L2 m2m device functions are implemented in mtk-mdp3-m2m.c
Probe, power, suspend/resume, system level functions are defined in
mtk-mdp3-core.c
[hverkuil: add 'depends on REMOTEPROC']
Signed-off-by: Ping-Hsun Wu <ping-hsun.wu@mediatek.com>
Signed-off-by: daoyuan huang <daoyuan.huang@mediatek.com>
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
