The guest I was trying to get to run uses the LHA and LHAU instructions.
Those instructions basically do a load, but also sign extend the result.
Since we need to fill our registers by hand when doing MMIO, we also need
to sign extend manually.
This patch implements sign extended MMIO and the LHA(U) instructions.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
Right now MMIO access can only happen for GPRs and is at most 32 bit wide.
That's actually enough for almost all types of hardware out there.
Unfortunately, the guest I was using used FPU writes to MMIO regions, so
it ended up writing 64 bit MMIOs using FPRs and QPRs.
So let's add code to handle those odd cases too.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
Modern PowerPCs have a 64 bit wide FPSCR register. Let's accomodate for that
and make it 64 bits in our vcpu struct too.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
The Gekko has GPRs, SPRs and FPRs like normal PowerPC codes, but
it also has QPRs which are basically single precision only FPU registers
that get used when in paired single mode.
The following patches depend on them being around, so let's add the
definitions early.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
The tracing infrastructure adds its own newlines. Remove
them from the trace point printk format strings.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The new lazy fpu switching code may disable cr0 intercepts
when running nested. This is a bug because the nested
hypervisor may still want to intercept cr0 which will break
in this situation. This patch fixes this issue and makes
lazy fpu switching working with nested svm.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Certain functions called during the emulated world switch
behave differently when the vcpu is running nested. This is
not the expected behavior during a world switch emulation.
This patch ensures that the nested state is activated only
if the vcpu is completly in nested state.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch makes syncing of the guest tpr to the lapic
conditional on !nested. Otherwise a nested guest using the
TPR could freeze the guest.
Another important change this patch introduces is that the
cr8 intercept bits are no longer ORed at vmrun emulation if
the guest sets VINTR_MASKING in its VMCB. The reason is that
nested cr8 accesses need alway be handled by the nested
hypervisor because they change the shadow version of the
tpr.
Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The nested_svm_exit_handled_msr() function maps only one
page of the guests msr permission bitmap. This patch changes
the code to use kvm_read_guest to fix the bug.
Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The nested_svm_map() function can sleep and must not be
called from atomic context. So annotate that function.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently the vmexit emulation does not sync control
registers were the access is typically intercepted by the
nested hypervisor. But we can not count on that intercepts
to sync these registers too and make the code
architecturally more correct.
Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Move the actual vmexit routine out of code that runs with
irqs and preemption disabled.
Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Use of kmap_atomic disables preemption but if we run in
shadow-shadow mode the vmrun emulation executes kvm_set_cr3
which might sleep or fault. So use kmap instead for
nested_svm_map.
Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch removes redundant prototype of load_pdptrs().
I found load_pdptrs() twice in kvm_host.h. Let's remove one.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch makes non-X86EMUL_* family functions not to use
the variable rc.
Be sure that this changes nothing but makes the purpose of
the variable rc clearer.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch just replaces integer values used inside
x86_emulate_insn() and its helper functions to X86EMUL_*.
The purpose of this is to make it clear what will happen
when the variable rc is compared to X86EMUL_* at the end
of x86_emulate_insn().
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch just replaces the integer values used inside x86's
decode functions to X86EMUL_*.
By this patch, it becomes clearer that we are using X86EMUL_*
value propagated from ops->read_std() in do_fetch_insn_byte().
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
x86 arch defines desc_ptr for idt/gdt pointers, no need to define
another structure in kvm code.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: allow 4 coldfire serial ports
m68knommu: fix coldfire tcdrain
m68knommu: remove a duplicate vector setting line for 68360
Fix m68k-uclinux's rt_sigreturn trampoline
m68knommu: correct the CC flags for Coldfire M5272 targets
uclinux: error message when FLAT reloc symbol is invalid, v2
* 'kvm-updates/2.6.34' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix TSS size check for 16-bit tasks
KVM: Add missing srcu_read_lock() for kvm_mmu_notifier_release()
KVM: Increase NR_IOBUS_DEVS limit to 200
KVM: fix the handling of dirty bitmaps to avoid overflows
KVM: MMU: fix kvm_mmu_zap_page() and its calling path
KVM: VMX: Save/restore rflags.vm correctly in real mode
KVM: allow bit 10 to be cleared in MSR_IA32_MC4_CTL
KVM: Don't spam kernel log when injecting exceptions due to bad cr writes
KVM: SVM: Fix memory leaks that happen when svm_create_vcpu() fails
KVM: take srcu lock before call to complete_pio()
A 16-bit TSS is only 44 bytes long. So make sure to test for the correct
size on task switch.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Fix tcdrain on coldfire uarts.
Currently with coldfire uarts tcdrain returns without waiting for txempty,
because (tx)fifosize is 0. Fix that and call uart_update_timeout when
setting the baud rate, otherwise tcdrain will wait for an half our :)
Also constify mcf_uart_ops.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Remove a duplicate vector setting line for the 68360 interrupt
setup. Pointed out by Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Before commit e28cbf2293 ("improve
sys_newuname() for compat architectures") 64-bit x86 had a private
implementation of sys_uname which was just called sys_uname, which other
architectures used for the old uname.
Due to some merge issues with the uname refactoring patches we ended up
calling the old uname version for both the old and new system call
slots, which lead to the domainname filed never be set which caused
failures with libnss_nis.
Reported-and-tested-by: Andy Isaacson <adi@hexapodia.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Int is not long enough to store the size of a dirty bitmap.
This patch fixes this problem with the introduction of a wrapper
function to calculate the sizes of dirty bitmaps.
Note: in mark_page_dirty(), we have to consider the fact that
__set_bit() takes the offset as int, not long.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Currently we set eflags.vm unconditionally when entering real mode emulation
through virtual-8086 mode, and clear it unconditionally when we enter protected
mode. The means that the following sequence
KVM_SET_REGS (rflags.vm=1)
KVM_SET_SREGS (cr0.pe=1)
Ends up with rflags.vm clear due to KVM_SET_SREGS triggering enter_pmode().
Fix by shadowing rflags.vm (and rflags.iopl) correctly while in real mode:
reads and writes to those bits access a shadow register instead of the actual
register.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
There is a quirk for AMD K8 CPUs in many Linux kernels (see
arch/x86/kernel/cpu/mcheck/mce.c:__mcheck_cpu_apply_quirks()) that
clears bit 10 in that MCE related MSR. KVM can only cope with all
zeros or all ones, so it will inject a #GP into the guest, which
will let it panic.
So lets add a quirk to the quirk and ignore this single cleared bit.
This fixes -cpu kvm64 on all machines and -cpu host on K8 machines
with some guest Linux kernels.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
svm_create_vcpu() does not free the pages allocated during the creation
when it fails to complete the allocations. This patch fixes it.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
complete_pio() may use slot table which is protected by srcu.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
We can overflow the hardirq stack if we set the %pil here
so early, just let the normal control flow do it.
This is fine as we are allowed to do the actual IRQ enable
at any point after we call trace_hardirqs_on.
Signed-off-by: David S. Miller <davem@davemloft.net>
* master.kernel.org:/home/rmk/linux-2.6-arm:
ARM: 5974/1: arm/mach-at91 Makefile: remove two blanks.
ARM: 6052/1: kdump: make kexec work in interrupt context
ARM: 6051/1: VFP: preserve the HW context when calling signal handlers
ARM: 6050/1: VFP: fix the SMP versions of vfp_{sync,flush}_hwstate
ARM: 6007/1: fix highmem with VIPT cache and DMA
ARM: 5975/1: AT91 slow-clock suspend: don't wait when turning PLLs off
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
lguest: stop using KVM hypercall mechanism
lguest: workaround cmpxchg8b_emu by ignoring cli in the guest.
Recently, we started seeing this on allmodconfig builds:
CC mm/memcontrol.o
{standard input}: Assembler messages:
{standard input}:4076: Error: operands mismatch -- statement `subl 12(%fp),170(%a0)' ignored
Correct the asm constraint, like done for m68knommu.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
LibSegFault uses piggybacks sc_fpstate field of the `struct sigcontext'
and this patch avoids LibSegFault overflowing this field. Also this
removes an unnecessary divergence from classic m68k.
Signed-off-by: Maxim Kuvyrkov <maxim@codesourcery.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
This is a partial revert of 4cd8b5e2a1 "lguest: use KVM hypercalls";
we revert to using (just as questionable but more reliable) int $15 for
hypercalls. I didn't revert the register mapping, so we still use the
same calling convention as kvm.
KVM in more recent incarnations stopped injecting a fault when a guest
tried to use the VMCALL instruction from ring 1, so lguest under kvm
fails to make hypercalls. It was nice to share code with our KVM
cousins, but this was overreach.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Matias Zabaljauregui <zabaljauregui@gmail.com>
Cc: Avi Kivity <avi@redhat.com>
Cosmetic change to mach-at91 Makefile: remove two blanks introduced
by earlier patches.
Signed-off-by: Ernst Schwab <eschwab@online.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
When crash happens in interrupt context there is no userspace context.
We always use current->active_mm in those cases.
Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
From: Imre Deak <imre.deak@nokia.com>
Signal handlers can use floating point, so prevent them to corrupt
the main thread's VFP context. So far there were two signal stack
frame formats defined based on the VFP implementation, but the user
struct used for ptrace covers all posibilities, so use it for the
signal stack too.
Introduce also a new user struct for VFP exception registers. In
this too fields not relevant to the current VFP architecture are
ignored.
Support to save / restore the exception registers was added by
Will Deacon.
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
From: Imre Deak <imre.deak@nokia.com>
Recently the UP versions of these functions were refactored and as
a side effect it became possible to call them for the current thread.
This isn't true for the SMP versions however, so fix this up.
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The VIVT cache of a highmem page is always flushed before the page
is unmapped. This cache flush is explicit through flush_cache_kmaps()
in flush_all_zero_pkmaps(), or through __cpuc_flush_dcache_area() in
kunmap_atomic(). There is also an implicit flush of those highmem pages
that were part of a process that just terminated making those pages free
as the whole VIVT cache has to be flushed on every task switch. Hence
unmapped highmem pages need no cache maintenance in that case.
However unmapped pages may still be cached with a VIPT cache because the
cache is tagged with physical addresses. There is no need for a whole
cache flush during task switching for that reason, and despite the
explicit cache flushes in flush_all_zero_pkmaps() and kunmap_atomic(),
some highmem pages that were mapped in user space end up still cached
even when they become unmapped.
So, we do have to perform cache maintenance on those unmapped highmem
pages in the context of DMA when using a VIPT cache. Unfortunately,
it is not possible to perform that cache maintenance using physical
addresses as all the L1 cache maintenance coprocessor functions accept
virtual addresses only. Therefore we have no choice but to set up a
temporary virtual mapping for that purpose.
And of course the explicit cache flushing when unmapping a highmem page
on a system with a VIPT cache now can go, which should increase
performance.
While at it, because the code in __flush_dcache_page() has to be modified
anyway, let's also make sure the mapped highmem pages are pinned with
kmap_high_get() for the duration of the cache maintenance operation.
Because kunmap() does unmap highmem pages lazily, it was reported by
Gary King <GKing@nvidia.com> that those pages ended up being unmapped
during cache maintenance on SMP causing segmentation faults.
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
