- New pinctrl entry additions for various peripherals
- Devices enabling for imx6, imx5 and imx27 boards
- Add missing device nodes like iim, owire, audmux and sram, etc.
- Various updates on boards like phytec, wandboard and sabresd
- Consolidate pad macros between imx6q and imx6dl
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJSFjFkAAoJEFBXWFqHsHzOjkcH/3c2IqXrZ/1GAQ8r4fkN1D7h
eOOiQ8hZriBxgbw72xeYAHTeMx3xZphW9n+fLHjrtqJNDI4yz/XWn2mdf55fFanm
jQb6bssbRHG4VgHaMuEjzKK4zQDrlSZgcVkOT2Aj0y+Mg7L21xUh9zRW3p2xh33x
Cg1NDLzFDChQBK/IIA0sHVOtmgn7lflfwlBbR2zvSHE4U4HNheqMCuxb3gB3aWXZ
VdxDbzQUukIwHrNlTTIV2CN2UOXfUi1Xgk7Xd/PvfAyywWpQnr7KMl9RdK4pxGo9
6G+Y984sh92jf43cF3uSCWN3+Y1bEQwmfQThoJCDV7sATG6yqblyo2X/cmUwK/c=
=llVa
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc
From Shawn Guo:
It contains the imx device tree updates for 3.12.
- New pinctrl entry additions for various peripherals
- Devices enabling for imx6, imx5 and imx27 boards
- Add missing device nodes like iim, owire, audmux and sram, etc.
- Various updates on boards like phytec, wandboard and sabresd
- Consolidate pad macros between imx6q and imx6dl
* tag 'imx-dt-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6: (92 commits)
ARM: dts: vf610-twr: enable i2c0 device
ARM: dts: i.MX51: Add one more I2C2 pinmux entry
ARM: dts: i.MX51: Move pins configuration under "iomuxc" label
ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog
ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator
ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX
ARM: dts: i.MX27: Disable AUDMUX in the template
ARM: dts: wandboard: Add support for SDIO bcm4329
ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template
ARM: dts: imx53-qsb: Make USBH1 functional
ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module
ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module
ARM: dts: imx6qdl-sabresd: Add touchscreen support
ARM: imx: add ocram clock for imx53
ARM: dts: imx: ocram size is different between imx6q and imx6dl
ARM: dts: imx27-phytec-phycore-som: Fix regulator settings
ARM: dts: i.MX27: Remove clock name from CPU node
ARM: dts: i.MX27: Increase "clock-latency" value
ARM: dts: i.MX27: Add label to CPU node
ARM: dts: i.MX27: Remove optional "ptp" clock source for FEC
...
Signed-off-by: Kevin Hilman <khilman@linaro.org>
- Add more ethernet phy fixups for imx6 boards
- Add some missing imx6q clocks into clock driver
- Add new clock types fixup mux and div to work around some ugly
hardware defect
- Consolidate L2 cache initialization function, so that it can be used
on more i.MX SoCs
- Replace magic numbers in mach-imx6q.c with well defined macros
- Small fixes for imx6q and pllv3 clock drivers
- Some random updates on imx defconfig files
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJSFi1LAAoJEFBXWFqHsHzOpdgIAKegIwrpKKLnTQI7AunLSi5N
gOhaR4gu0BcsPejFeqCUh5Hs1zun8+MLoc/ZUtg8CQ7PkpkWSHYFOwfefldG0fLC
9Xt4SsiVNiOEsYRwtoDdEw5JGykSO0htoPOKJ0q+kIuko8mBeAm8r3J2PldF8XxX
FnHPndXnt6XYuDTOIjyfMtqDfZYAzT1ClZE1dgm7xnsXexT6fT9hdNyrqZidf4Fq
sWGxgFc3vQVUCJoO8kGQrlFcrH1BbHH0QtrzvMOvdqBmQw2HFdGS52RC83mymeyi
gcF3edsYF/fxWUoL1omV7K93TakBA5LWDHmCvDUn626fnbinYr+EIhRPomBEC1Y=
=wgVh
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc
From Shawn Guo:
It contains a bunch of imx soc updates for 3.12.
- Add more ethernet phy fixups for imx6 boards
- Add some missing imx6q clocks into clock driver
- Add new clock types fixup mux and div to work around some ugly
hardware defect
- Consolidate L2 cache initialization function, so that it can be used
on more i.MX SoCs
- Replace magic numbers in mach-imx6q.c with well defined macros
- Small fixes for imx6q and pllv3 clock drivers
- Some random updates on imx defconfig files
* tag 'imx-soc-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6: (33 commits)
phy: micrel: Add definitions for common Micrel PHY registers
ARM: imx: Re-select CONFIG_SND_SOC_IMX_MC13783 option
ARM: imx: Move anatop related from board file to anatop driver
ARM: imx_v6_v7_defconfig: Enable wireless support
ARM: imx_v4_v5_defconfig: Cleanup imx_v4_v5_defconfig
ARM: imx_v6_v7_defconfig: Add SATA support
ARM: imx_v6_v7_defconfig: Cleanup imx_v6_v7_defconfig
ARM: mx53: Allow suspend/resume
ARM: mach-imx: Select ARM_CPU_SUSPEND at ARCH_MXC level
ARM: imx_v6_v7_defconfig: Select CONFIG_TOUCHSCREEN_EGALAX
ARM: imx6q: add vdoa gate clock
ARM: imx6q: add the missing cko output selection
ARM: imx6q: add cko2 clocks
ARM: imx6q: add spdif gate clock
ARM: imx: clk-pllv3: improve the timeout waiting method
ARM: imx6: change some clocks to fixup clocks
ARM: imx: add common clock support for fixup mux
ARM: imx: add common clock support for fixup div
ARM: imx: Select MIGHT_HAVE_CACHE_L2X0
ARM: imx: fix imx_init_l2cache storage class
...
support more i.MX SoCs. Because there is no maintainer for
drivers/bus so far, I'm forwarding it through IMX tree for 3.12 merge
window.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJSDbQLAAoJEFBXWFqHsHzOXroIALgClVwAauhqCX3Yeqsnv5C2
IW92F/5sM/DGFvkNbSjbZG6dS33PsWvTnGBUDQPjo4QLeASlFeO/ZXfmDgOQCawl
ZQZLO+mUj2DkbROEtR9hT3+0q5i7Qltc6FiDb322QPeW99LuJB1T6JSZCh9JixOe
iksGb0LwDm7Ro9u8wB1DtLNL5njqptu/J0ymbpMmauPBlJ4J/3pdniHZSNJklH/i
tOUfHqaEwtHlL95OYS+43YjIYLRwt/GzLKuN4Ru89/NRE2VcgE6DAweTdBfmufzY
3wvLE59KYl4/RVw4tvNymILu+qgxrwEIakc/z5FeBlgpxCGJoBI52VHSBwxaCsE=
=jW6P
-----END PGP SIGNATURE-----
Merge tag 'imx-weim-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc
From Shawn Guo:
This is a patch series that updates imx-weim bus driver to have it
support more i.MX SoCs. Because there is no maintainer for
drivers/bus so far, I'm forwarding it through IMX tree for 3.12 merge
window.
* tag 'imx-weim-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6:
drivers: bus: imx-weim: Add support for i.MX1/21/25/27/31/35/50/51/53
drivers: bus: imx-weim: Add missing platform_driver.owner field
drivers: bus: imx-weim: use module_platform_driver_probe()
drivers: bus: imx-weim: Simplify error path
drivers: bus: imx-weim: Remove private driver data
----------------------------
This set of patches add ethernet DT nodes
for DA850 and also remove now unneeded
specification of UART clock frequency so
kernel can now boot irrespective of what
the bootloader setting of UART frequency is.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=7jwl
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v3.12/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc
From Sekhar Nori:
DaVinci DT updates for v3.12
----------------------------
This set of patches add ethernet DT nodes
for DA850 and also remove now unneeded
specification of UART clock frequency so
kernel can now boot irrespective of what
the bootloader setting of UART frequency is.
* tag 'davinci-for-v3.12/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: da850: do not specify clock_frequency for UART DT node
ARM: davinci: da850: add DT node for ethernet
ARM: davinci: da850: add OF_DEV_AUXDATA entry for davinci_emac
ARM: davinci: da850: add OF_DEV_AUXDATA entry for mdio.
ARM: davinci: da850: add DT node for mdio device
Signed-off-by: Kevin Hilman <khilman@linaro.org>
-----------------------------
This set of SoC updates contains changes to the
way UART clock is handled to enabled DT-boot to
obtain UART clock frequency instead of relying
on DT-binding being supplied. Similarly handling
of MDIO clock is fixed to make it easier to support
MDIO in DT-boot. Finally there is patch to remove
now unnecessary setting of wake-up capable flag for
RTC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=e6I8
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v3.12/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc
From Sekhar Nori:
DaVinci SoC updates for v3.12
-----------------------------
This set of SoC updates contains changes to the
way UART clock is handled to enabled DT-boot to
obtain UART clock frequency instead of relying
on DT-binding being supplied. Similarly handling
of MDIO clock is fixed to make it easier to support
MDIO in DT-boot. Finally there is patch to remove
now unnecessary setting of wake-up capable flag for
RTC.
* tag 'davinci-for-v3.12/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: fix clock lookup for mdio device
ARM: davinci: da8xx: remove hard coding of rtc device wakeup
ARM: davinci: serial: remove davinci_serial_setup_clk()
ARM: davinci: serial: get rid of davinci_uart_config
ARM: davinci: da8xx: remove da8xx_uart_clk_enable
ARM: davinci: uart: move to devid based clk_get
Signed-off-by: Kevin Hilman <khilman@linaro.org>
- Add support for restart using the PRCMU
- Move secondary startup out of INIT section
- set coherent_dma_mask for DMA40
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=Yjww
-----END PGP SIGNATURE-----
Merge tag 'ux500-core-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/soc
From Linus Walleij:
Core ux500 changes for v3.12:
- Add support for restart using the PRCMU
- Move secondary startup out of INIT section
- set coherent_dma_mask for DMA40
* tag 'ux500-core-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: ux500: set coherent_dma_mask for dma40
ARM: ux500: remove u8500_secondary_startup from INIT section.
ARM: ux500: add restart support via prcmu
This unmix module/pin definitions and reduce indentation for pin
groups, so makes template a bit cleaner.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
USB OTG vbus pin needs to be configured as gpio function at
sabresd board.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
We enabled USB host 1, so host 1's vbus should be on to let
host 1 work.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Patch adds AUDMUX routing for Phytec PCM-038 module.
This route i.MX SSI0 (Port 1) to the slave port 4 where MC13783
codec interface is connected.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
AUDMUX expects additional parameters to be configured correctly,
so turn it off into a template.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
The wandboard has a Broadcom 4329 WiFi connected via SDIO. This patch
sets the required pins to enable the wifi module.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
External high frequency clock CKIH1 is optional for i.MX51, so move
it setup into boards where it is used.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
mx53qsb uses GPIO7_8 to turn on VBUS, so add support for it.
Also specify the PHY type in the device tree.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This patch enables I2C1 and adds device tree nodes for the EEPROM and the
DA9063 PMIC connected to this I2C bus.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
mx6 sabresd boards have a egalax touchscreen controller connected via I2C3.
Add support for it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
The ocram on imx6q is 256 KiB while on imx6dl it's 128 KiB. Let's
have separate node for imx6q and imx6dl. It also changes imx6q size
0x3f000 to 0x40000 to match the hardware.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Liu Ying <Ying.Liu@freescale.com>
Outputs regulator SW1A and SW1A, SW2A and SW2B are connected together,
so it determined as "joined" operation for MC13783. Separate work of
these outputs in this case would be wrong, so we define only one of
the outputs.
Additionally, define the full range of voltages for the CPU (1.2v - 1.52v).
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Clock name is not needed for "cpufreq-cpu0".
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
i.MX27 CPU can be clocked with a 32 kHz quartz, and not just 32768 Hz,
so increase "clock-latency" value, which will ensure that we use two
clock cycles on frequency change.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Add a label to i.MX27 CPU node. This change allows the reuse this node
in the upper levels of the DTS.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This is useful for testing suspend/resume sequence.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
The CLKO is widely used by imx6q board designs to clock audio codec.
Since most codecs accept 24 MHz frequency, let's initially set up CLKO
with OSC24M (cko <-- cko2 <-- osc). Then those board specific CLKO
setup for audio codec can be removed.
The board dts files also need an update on cko reference in codec node.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Add support for the imx6q wanboard variant.
Since imx6q/dl are pin to pin compatible, introduce the imx6qdl-wandboard.dtsi
file that contains the common peripheral nodes.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
After mxs-dma driver adopts generic DMA device tree binding, gpmi
channel interrupt number is defined in DMA controller node, and
channel ID is listed in "dmas" property. So the DMA channel interrupt
number in gpmi node "interrupts" property and fsl,gpmi-dma-channel which
are used by old customized DMA binding can be removed now.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Only imx6q has the ahci sata controller, enable
it on imx6q platforms.
Signed-off-by: Richard Zhu <r65037@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This patch adds core voltages for i.MX27 CPUs. Only 266 and 400 MHz modes
is documented in the datasheet, so we add a 266 MHz frequency for conform this.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Wandboard has a bluetooth device connected to UART3, so add support for it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Wandboard has a SD card slot on the baseboard connected to SDHC1 and a
BCM4329 (Wifi + Bluetooth chip) connected to SDHC2.
Add support for these ports.
While at it, provide the card detect gpio on SDHC3 and also fix indentation on
MX6QDL_PAD_GPIO_0__CCM_CLKO1 hog pin.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Add the dma property for all the uart.
Note: Add the dma property does not mean we enable the dma for this
uart.
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Add the a new pinctrl for uart3. In the imx6q{dl}-sabreauto boards,
the uart3 is used for Bluetooth.
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Add more imx6q/dl pin groups for those supported boards, e.g. sabresd,
sabreauto, arm2.
IPU2 pin groups are added into imx6q.dtsi, since the block is only
available on imx6q.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
The imx6q and imx6dl are two pin-to-pin compatible SoCs. The same board
design can work with either chip plugged into the socket, e.g. sabresd
and sabreauto boards.
We currently define pin groups in imx6q.dtsi and imx6dl.dtsi
respectively because the pad macro names are different between two
chips. This brings a maintenance burden on having the same label point
to the same pin group defined in two places.
The patch replaces prefix MX6Q_ and MX6DL_ with MX6QDL_ for both SoCs
pad macro names. Then the pin groups becomes completely common between
imx6q and imx6dl and can just be moved into imx6qdl.dtsi, so that the
long term maintenance of imx6q/dt pin settings becomes easier.
Unfortunately, the change brings some dramatic diff stat, but it's all
about DTS file, and the ultimate net diff stat is good.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
enable the uart2 for imx6q-arm2 board.
The uart2 works in the DTE mode, with the RTS/CTS and DMA enabled.
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
In the arm2 board, the UART2 works in the dte mode.
So add a pinctrl for both the imx6q{dl} boards.
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
The uart2 in the imx6q-arm2 board is used as a DTE uart,
this patch adds the necessary DTE pads for uart2.
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
