These config changes build:
drivers/power/reset/gpio-poweroff.c
drivers/power/reset/gpio-restart.c
Signed-off-by: Andy Fleming <afleming@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Use of_property_read_u32 instead of the generic of_get_property to
simplify the code. In addition move the declaration of fs_baudrate
into get_baudrate because it's private to this function.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Use of_property_read_u32 instead of the generic of_get_property to
simplify the code. In addition move the declaration of brgfreq
into get_brgfreq because it's private to this function.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
[scottwood: minor whitespace fixes]
Signed-off-by: Scott Wood <oss@buserror.net>
Use of_property_read_u32 instead of the generic of_get_property to
simplify the code. In addition move the declaration of sysfreq
into fsl_get_sys_freq because it's private to this function.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
The QEMU e500 board needs to enable CONFIG_E500 to correctly boot. QEMU
for ppc64 uses e5500/e6500 emulation, thus CONFIG_PPC_E500MC is required
as well.
Signed-off-by: David Engraf <david.engraf@sysgo.com>
Signed-off-by: Scott Wood <oss@buserror.net>
The T4240RDB contains a W83793 hardware monitoring chip. Add a device
tree entry to make the driver attach to it, as the i2c-mpc bus driver
dropped support for class-based instantiation of devices a long time
ago.
Signed-off-by: Florian Larysch <fl@n621.de>
Signed-off-by: Scott Wood <oss@buserror.net>
Version 3.00 of the ISA states that the PATS (partition table size) field
of the PTCR (partition table control register) and the PRTS (process table
size) field of the partition table entry must both be less than or equal
to 24. However the actual size of the partition and process tables is equal
to 2 to the power of 12 plus the PATS and PRTS fields, respectively. This
means that the max allowable size of each of these tables is 2^36 or 64GB
for both.
Thus when checking the size shift for each we should be checking for values
of greater than 36 instead of the current check for shifts larger than 24
and 23.
Fixes: 2bfd65e45e
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Useful to be able to dump the kernel hash page table to check
which pages are hashed along with their sizes and other details.
Add a debugfs file to check the hash page table. If radix is enabled
(and so there is no hash page table) then this file doesn't exist. To
use this the PPC_PTDUMP config option must be selected.
Signed-off-by: Rashmica Gupta <rashmicy@gmail.com>
[mpe: Fix build with SPARSEMEM_VMEMMAP=n & PSERIES=n]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Useful to be able to dump the kernels page tables to check permissions
and memory types - derived from arm64's implementation.
Add a debugfs file to check the page tables. To use this the PPC_PTDUMP
config option must be selected.
Signed-off-by: Rashmica Gupta <rashmicy@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently there's some CMO (Cooperative Memory Overcommit) code, in
plpar_wrappers.h. Some of it is #ifdef CONFIG_PSERIES and some of it
isn't. The end result being if a file includes plpar_wrappers.h it won't
build with CONFIG_PSERIES=n.
Fix it by moving the CMO code into platforms/pseries. The two hcall
wrappers can just be moved into their only caller, cmm.c, and the
accessors can go in pseries.h.
Note we need the accessors because cmm.c can be built as a module, so
there needs to be a split between the built-in code vs the module, and
that's achieved by using those accessors.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts storcenter_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts pseries_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts ppc6xx_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts ppc64e_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts ppc64_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts pmac32_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
This patch disables deprecated IDE subsystem in pasemi_defconfig
(no IDE host drivers are selected in this config so there is no valid
reason to enable IDE subsystem itself).
Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts maple_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts g5_defconfig to use libata PATA drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts chrp32_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts cell_defconfig to use libata PATA drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts amigaone_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Add comment clarifying that vio_find_node() takes a reference to the
embedded struct device which needs to be dropped after use.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Make sure to drop any reference taken by bus_find_device() when creating
devices during init and driver registration.
Fixes: 55347cc996 ("[POWERPC] ibmebus: Add device creation and bus probing based on of_device")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Make sure to drop any reference taken by bus_find_device() in the sysfs
callbacks that are used to create and destroy devices based on
device-tree entries.
Fixes: 6bccf755ff ("[POWERPC] ibmebus: dynamic addition/removal of adapters, some code cleanup")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This condenses the opal node searching into a single function that finds
all compatible nodes, instead of just searching the ibm,opal children,
for ipmi, flash, and prd similar to how opal-i2c nodes are found.
Signed-off-by: Jack Miller <jack@codezen.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Load monitored is no longer supported on POWER9 so let's remove the
code.
This reverts commit bd3ea317fd ("powerpc: Load Monitor Register
Support").
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
No one uses reiserfs much these days, or is likely to in future. So drop
it from pseries and powernv defconfigs to save time and space. It's
still enabled in ppc64_defconfig so we get some build coverage.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In ISA v2.05, the tlbiel instruction takes two arguments, RB and L:
tlbiel RB,L
+---------+---------+----+---------+---------+---------+----+
| 31 | / | L | / | RB | 274 | / |
| 31 - 26 | 25 - 22 | 21 | 20 - 16 | 15 - 11 | 10 - 1 | 0 |
+---------+---------+----+---------+---------+---------+----+
In ISA v2.06 tlbiel takes only one argument, RB:
tlbiel RB
+---------+---------+---------+---------+---------+----+
| 31 | / | / | RB | 274 | / |
| 31 - 26 | 25 - 21 | 20 - 16 | 15 - 11 | 10 - 1 | 0 |
+---------+---------+---------+---------+---------+----+
And in ISA v3.00 tlbiel takes five arguments:
tlbiel RB,RS,RIC,PRS,R
+---------+---------+----+---------+----+----+---------+---------+----+
| 31 | RS | / | RIC |PRS | R | RB | 274 | / |
| 31 - 26 | 25 - 21 | 20 | 19 - 18 | 17 | 16 | 15 - 11 | 10 - 1 | 0 |
+---------+---------+----+---------+----+----+---------+---------+----+
However the assembler also accepts "tlbiel RB", and generates
"tlbiel RB,r0,0,0,0".
As you can see above the L field from the v2.05 encoding overlaps with the
reserved field of the v2.06 encoding, and the low bit of the RS field of the
v3.00 encoding.
Currently in __tlbiel() we generate two tlbiel instructions manually using hex
constants. In the first case, for MMU_PAGE_4K, we generate "tlbiel RB,0", which
is safe in all cases, because the L bit is zero.
However in the default case we generate "tlbiel RB,1", therefore setting bit 21
to 1.
This is not an actual bug on v2.06 processors, because the CPU ignores the value
of the reserved field. However software is supposed to encode the reserved
fields as zero to enable forward compatibility.
On v3.00 processors setting bit 21 to 1 and no other bits of RS, means we are
using r1 for the value of RS.
Although it's not obvious, the code sets the IS field (bits 10-11) to 0 (by
omission), and L=1, in the va value, which is passed as RB. We also pass R=0 in
the instruction.
The combination of IS=0, L=1 and R=0 means the value of RS is not used, so even
on ISA v3.00 there is no actual bug.
We should still fix it, as setting a reserved bit on v2.06 is naughty, and we
are only avoiding a bug on v3.00 by accident rather than design. Use
ASM_FTR_IFSET() to generate the single argument form on ISA v2.06 and later, and
the two argument form on pre v2.06.
Although there may be very old toolchains which don't understand tlbiel, we have
other code in the tree which has been using tlbiel for over five years, and no
one has reported any build failures, so just let the assembler generate the
instructions.
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
[mpe: Rewrite change log, use IFSET instead of IFCLR]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we're not compiling for a specific CPU, ie. none of the
CONFIG_POWERx_CPU options are set, and CONFIG_GENERIC_CPU *is* set, we
currently don't pass any -mcpu option to the compiler. This means the
compiler builds for a "generic" Power CPU.
But back in 2014 we dropped support for pre power4 CPUs in commit
468a33028e ("powerpc: Drop support for pre-POWER4 cpus").
Given that, there's no point in building the kernel to run on pre power4
cpus. So update the flags we pass to the compiler when
CONFIG_GENERIC_CPU is set, to specify -mcpu=power4.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds a config option that can help exercise the case when
the kernel is not running at PAGE_OFFSET.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
An hcall was recently added that does exactly what we need during kexec
- it clears the entire MMU hash table, ignoring any VRMA mappings.
Try it and fall back to the old method if we get a failure.
On a POWER8 box with 5TB of memory, this reduces the time it takes to
kexec a new kernel from from 4 minutes to 1 minute.
Signed-off-by: Anton Blanchard <anton@samba.org>
Tested-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
[mpe: Split into separate functions and tweak function naming]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This halves the exception table size on 64-bit builds, and it allows
build-time sorting of exception tables to work on relocated kernels.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Minor asm fixups and bits to keep the selftests working]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This macro is taken from s390, and allows more flexibility in
changing exception table format.
mpe: Put it in ppc_asm.h and only define one version using
stringinfy_in_c(). Add some empty definitions and headers to keep the
selftests happy.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We haven't seen these before, but the soon to be merged relative
exception tables support causes them to be generated.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There's no reason to #error if we include ppc_asm.h in asm files, the
ifdef already prevents any problems.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Exception handlers are aligned to 128 bytes (L1 cache) on 64s, which is
overkill. It can reduce the icache footprint of any individual exception
path. However taken as a whole, the expansion in icache footprint seems
likely to be counter-productive and cause more total misses.
Create IFETCH_ALIGN_SHIFT/BYTES, which should give optimal ifetch
alignment with much more reasonable alignment. This saves 1792 bytes
from head_64.o text with an allmodconfig build.
Other subarchitectures should define appropriate IFETCH_ALIGN_SHIFT
values if this becomes more widely used.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There are three #ifdef CONFIG_PPC_BOOK3E sections in nohash/64/pgtable.h.
And there should be no configurations possible which use nohash/64/pgtable.h
but don't also enable CONFIG_PPC_BOOK3E.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Rui Teng <rui.teng@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
wait for next week.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQExBAABCAAbBQJYJvAXFBxwYm9uemluaUByZWRoYXQuY29tAAoJEL/70l94x66D
ztUH/3DZVYkVYUea+Sk1mBnLaK5cbEJMGtxV/NsAqwz8rYB981cB5Iqw0+f2HX2G
LWLc0cf/kyUH+6TrFxQFyXLsBvV7xku2YwJdoiRutpR50767qPFPaPUBHcxCYPYR
MI4VSXb1hW0c4rd8409HesKv5qc5BiYjdWKPMu+f1LUF2CED+Xq4SWHVg+CwSE8i
UInvFUlj/ejQlSdxN2piv87SRcMuO+4nzP+JbtyN7onvtLIah6JfvHhlOO6em+0c
KX1G3qQ6fth6jewTdOPUB1Tx8CoEAZ+YLieRQA19vGHVI4eIhofDgtSaPZJmu9G7
0kjbrlqAuViTEsRl7Dx8zT8OpBM=
=N6w9
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM fixes. There are a couple pending x86 patches but they'll have to
wait for next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm/arm64: vgic: Kick VCPUs when queueing already pending IRQs
KVM: arm/arm64: vgic: Prevent access to invalid SPIs
arm/arm64: KVM: Perform local TLB invalidation when multiplexing vcpus on a single CPU
- mmap handler for dma ops as generic handler no longer works for us [Alexey]
- Fixes for EZChip platform [Noam]
- Fix RTC clocksource driver build issue
- ARC IRQ handling fixes [Yuriy]
- Revert a recent makefile change which doesn't go well with oldish tools out in the wild
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=hbBv
-----END PGP SIGNATURE-----
Merge tag 'arc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- mmap handler for dma ops as generic handler no longer works for us
[Alexey]
- Fixes for EZChip platform [Noam]
- Fix RTC clocksource driver build issue
- ARC IRQ handling fixes [Yuriy]
- Revert a recent makefile change which doesn't go well with oldish
tools out in the wild
* tag 'arc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARCv2: MCIP: Use IDU_M_DISTRI_DEST mode if there is only 1 destination core
ARC: IRQ: Do not use hwirq as virq and vice versa
ARC: [plat-eznps] set default baud for early console
ARC: [plat-eznps] remove IPI clear from SMP operations
Revert "ARC: build: retire old toggles"
ARC: timer: rtc: implement read loop in "C" vs. inline asm
ARC: change return value of userspace cmpxchg assist syscall
arc: Implement arch-specific dma_map_ops.mmap
ARC: [SMP] avoid overriding present cpumask
ARC: Enable PERF_EVENTS in nSIM driven platforms
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5c2j
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.9-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Update MAINTAINERS for Intel VMD driver filename
- Update Rockchip rk3399 host bridge driver DTS and resets
- Fix ROM shadow problem that made some video device initialization
fail
* tag 'pci-v4.9-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: VMD: Update filename to reflect move
arm64: dts: rockchip: add three new resets for rk3399 PCIe controller
PCI: rockchip: Add three new resets as required properties
PCI: Don't attempt to claim shadow copies of ROM
Merge fixes for -Wmaybe-uninitialized from Arnd Bergmann:
"It took a while for some patches to make it into mainline through
maintainer trees, but the 28-patch series is now reduced to 10, with
one tiny patch added at the end.
Aside from patches that are no longer required, I did these changes
compared to version 1:
- Dropped "iio: maxim_thermocouple: detect invalid storage size in
read()", which is currently in linux-next as commit 32cb7d27e6.
This is the only remaining warning I see for a couple of corner
cases (kbuild bot reports it on blackfin, kernelci bot and arm-soc
bot both report it on arm64)
- Dropped "brcmfmac: avoid maybe-uninitialized warning in
brcmf_cfg80211_start_ap", which is currently in net/master merge
pending.
- Dropped two x86 patches, "x86: math-emu: possible uninitialized
variable use" and "x86: mark target address as output in 'insb'
asm" as they do not seem to trigger for a default build, and I got
no feedback on them. Both of these are ancient issues and seem
harmless, I will send them again to the x86 maintainers once the
rest is merged.
- Dropped "rbd: false-postive gcc-4.9 -Wmaybe-uninitialized" based on
feedback from Ilya Dryomov, who already has a different fix queued
up for v4.10. The kbuild bot reports this as a warning for xtensa.
- Replaced "crypto: aesni: avoid -Wmaybe-uninitialized warning" with
a simpler patch, this one always triggers but my first solution
would not be safe for linux-4.9 any more at this point. I'll follow
up with the larger patch as a cleanup for 4.10.
- Replaced "dib0700: fix nec repeat handling" with a better one,
contributed by Sean Young"
* -Wmaybe-uninitialized fixes:
Kbuild: enable -Wmaybe-uninitialized warnings by default
pcmcia: fix return value of soc_pcmcia_regulator_set
infiniband: shut up a maybe-uninitialized warning
crypto: aesni: shut up -Wmaybe-uninitialized warning
rc: print correct variable for z8f0811
dib0700: fix nec repeat handling
s390: pci: don't print uninitialized data for debugging
nios2: fix timer initcall return value
x86: apm: avoid uninitialized data
NFSv4.1: work around -Wmaybe-uninitialized warning
Kbuild: enable -Wmaybe-uninitialized warning for "make W=1"
The rfc4106 encrypy/decrypt helper functions cause an annoying
false-positive warning in allmodconfig if we turn on
-Wmaybe-uninitialized warnings again:
arch/x86/crypto/aesni-intel_glue.c: In function ‘helper_rfc4106_decrypt’:
include/linux/scatterlist.h:67:31: warning: ‘dst_sg_walk.sg’ may be used uninitialized in this function [-Wmaybe-uninitialized]
The problem seems to be that the compiler doesn't track the state of the
'one_entry_in_sg' variable across the kernel_fpu_begin/kernel_fpu_end
section.
This takes the easy way out by adding a bogus initialization, which
should be harmless enough to get the patch into v4.9 so we can turn on
this warning again by default without producing useless output. A
follow-up patch for v4.10 rearranges the code to make the warning go
away.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gcc correctly warns about an incorrect use of the 'pa' variable in case
we pass an empty scatterlist to __s390_dma_map_sg:
arch/s390/pci/pci_dma.c: In function '__s390_dma_map_sg':
arch/s390/pci/pci_dma.c:309:13: warning: 'pa' may be used uninitialized in this function [-Wmaybe-uninitialized]
This adds a bogus initialization to the function to sanitize the debug
output. I would have preferred a solution without the initialization,
but I only got the report from the kbuild bot after turning on the
warning again, and didn't manage to reproduce it myself.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When called more than twice, the nios2_time_init() function return an
uninitialized value, as detected by gcc -Wmaybe-uninitialized
arch/nios2/kernel/time.c: warning: 'ret' may be used uninitialized in this function
This makes it return '0' here, matching the comment above the function.
Acked-by: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
apm_bios_call() can fail, and return a status in its argument structure.
If that status however is zero during a call from
apm_get_power_status(), we end up using data that may have never been
set, as reported by "gcc -Wmaybe-uninitialized":
arch/x86/kernel/apm_32.c: In function ‘apm’:
arch/x86/kernel/apm_32.c:1729:17: error: ‘bx’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
arch/x86/kernel/apm_32.c:1835:5: error: ‘cx’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
arch/x86/kernel/apm_32.c:1730:17: note: ‘cx’ was declared here
arch/x86/kernel/apm_32.c:1842:27: error: ‘dx’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
arch/x86/kernel/apm_32.c:1731:17: note: ‘dx’ was declared here
This changes the function to return "APM_NO_ERROR" here, which makes the
code more robust to broken BIOS versions, and avoids the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
