SLs which are mapped to SC15 are invalid and should fail the
operation.
For RC/UC QP types, verify the AH information at modify_qp time and
fail the modify_qp if the SL is invalid.
For other QP types check the SL during post_send via the new rdmavt
callback.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
hfi1 HW has a high PCIe ASPM L1 exit latency and also advertises an
acceptable latency less than actual ASPM latencies. Additional
mechanisms than those provided by BIOS/OS are therefore required to
enable/disable ASPM for hfi1 to provide acceptable power/performance
trade offs. This patch adds this support.
By means of a module parameter ASPM can be either (a) always enabled
(power save mode) (b) always disabled (performance mode) (c)
enabled/disabled dynamically. The dynamic mode implements two
heuristics to alleviate possible problems with high ASPM L1 exit
latency. ASPM is normally enabled but is disabled if (a) there are any
active user space PSM contexts, or (b) for verbs, ASPM is disabled as
interrupt activity for a context starts to increase.
A few more points about the verbs implementation. In order to reduce
lock/cache contention between multiple verbs contexts, some processing
is done at the context layer before contending for device layer
locks. ASPM is disabled when two interrupts for a context happen
within 1 millisec. A timer is scheduled which will re-enable ASPM
after 1 second should the interrupt activity cease. Normally, every
interrupt, or interrupt-pair should push the timer out
further. However, since this might increase the processing load per
interrupt, pushing the timer out is postponed for half a second. If
after half a second we get two interrupts within 1 millisec the timer
is pushed out by another second.
Finally, the kernel ASPM API is not used in this patch. This is
because this patch does several non-standard things as SW workarounds
for HW issues. As mentioned above, it enables ASPM even when advertised
actual latencies are greater than acceptable latencies. Also, whereas
the kernel API only allows drivers to disable ASPM from driver probe,
this patch enables/disables ASPM directly from interrupt context. Due
to these reasons the kernel ASPM API was not used.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add a per port sysfs paramter to toggle cc_prescan/Fast ECN Detection and
remove the Kconfig option which was previously used to control this.
While am updating the sysfs documentation, fix the name of CCMgtA.
Reviewed-by: Arthur Kepner <arthur.kepner@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Vennila Megavannan <vennila.megavannan@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The RcvCtxtCtrl register was being incorrectly set upon context
initialization and clean up resulting, in many cases, of contexts using
settings from previous contexts' initialization. This resulted in bad
and unexpected behavior. This was especially important for the TailUpd
bit, which requires special handling and if set incorrectly could lead
to severely degraded performance.
This patch fixes the handling of the RcvCtxtCtrl register, ensuring that
each context gets initialized with settings applicable only for that
context. It also ensures the proper setting for the TailUpd bit by
setting it to either 0 or 1 (as needed by the context's configuration)
explicitly.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When 32-bit hardware counters overflow, hfi1stats misinterprets
the counters as being 64 bits causing the deltas for the
counters to be a huge number. This patch makes hfi1stats
aware that a counter is 32 bits by making the driver write
<counter name>,32 to debugfs.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The simulator does not correctly handle LCB cclk loopback.
Skip that step for simulation - it is not needed.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Simulation has no firmware, so it will never move firmware
acquire to the FINAL state. Avoid that by skiping the TRY
state and moving directly to FINAL.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Loopback plugs used for testing hardware don't need to be qualified to
bring the link up unlike production cables. This patch adds an exception
for loopback plugs to the QSFP and SerDes tuning algortihm.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Make firmware validation failure and missing firmware messages
a warning since alternates can be tried. Add an error message
when all attempts fail.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Implement per-VL transmit counters. Not all errors can be
attributed to a particular VL, so make a best attempt.
o Extend the egress error bits used to count toward transmit
discard.
o When an egress error or send error occur, try to map back
to a VL.
o Implement a SDMA engine to VL (back) map.
o Add per-VL port transmit counters
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The gen3 bump code must mark a firmware download failure as fatal.
Otherwise a later load attempt will fail with a NULL dereference.
Also:
o Only do a firmware back-off for RTL. There are no alternates for
FPGA or simulation.
o Rearrange OS firmware request order to match what is actually
loaded. This results in more coherent informational messages
in the case of missing firmware.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch implements support for turning on and off the clock data
recovery mechanisms implemented in QSFP cable on request by the DC 8051
on a per-lane basis.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The current code employs a heuristic to guess the port type.
The canonical location to identify the port type of the
designed platform is from the platform configuration data.
This patch uses the previously fetched port type from the platform
configuration and removes the now obsolete heuristic routine
and its associated defines.
Reviewed-by: Arthur Kepner <arthur.kepner@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch qualifies and tunes active and optical cables for optimal
bit error rate and signal integrity settings. These settings are
fetched from the platform configuration data.
Based on attributes of the QSFP cable as read from the SFF-8636
compliant memory map, we select the appropriate settings from the
platform configuration data (examples: TX/RX equalization, enabling
cable high power, enabling TX/RX clock data recovery mechanisms, and RX
amplitude control) and apply them to the SERDES and QSFP cable.
The platform configuration data also contains system parameters such
as maximum power dissipation supported, and the cables are qualified
based on these parameters. As part of qualifying the cables, the
correct OfflineDisabledReasons are set for the appropriate scenarios.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Brent R Rothermel <brent.r.rothermel@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The QSFP memory cache reads both lower and upper page 0H in one shot,
which leads to the address counter wrapping around to the beginning of
lower page 00H at byte 128, as defined by SFF-8636.
This patch fixes this by modifying the underlying QSFP read and writes
to avoid this wrap around.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The ":" in "%s:" adds no value.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Removing QSFP cable should report 'No Local Media' instead of
'Transient' as reported by 'opaportinfo'.
Workaround is to change the state to
OPA_LINKDOWN_REASON_LOCAL_MEDIA_NOT_INSTALLED in cable handler.
With cable still removed, 'opaportinfo bounce' should not cause a
state change to Polling, as reported by 'opaportinfo'.
Resolution is to prevent physical state change from Offline->Polling.
Use a macro to mask lower nibble of OPA_LINKDOWN_REASON* as needed
for offline_disabled_reason.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Reported-by: Todd Rimmer <todd.rimmer@intel.com>
Signed-off-by: Bryan Morgan <bryan.c.morgan@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
srq functionality is now in rdmavt. Remove it from the hfi1 driver.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Rely on rvt_query_qp function defined in rdmavt
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Get rid of create and free mad agent from the driver and use rdmavt
version.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
No longer do drivers need to call into the IB core to allocate the verbs
device. Use the functionality provided by rdmavt.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Now that rdmavt has solidified in its design we can clean up the driver
specific register device functions. This handles hfi1.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch removes the simple post recv function in favor of using rdmavt.
The packet receive processing still lives in the driver though.
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This removes the destroy qp verbs in favor of using rdmavt.
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In addition to removing the modify queue pair verb from hfi1 we also
remove ancillary functions which existed only for modify queue pair and
are also already present in hfi1.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Multicast is now supported by rdmavt. Remove the verbs multicast functions
and use that.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch removes the post_send and post_one_send from the hfi1 driver.
The "posting" of sends will be done by rdmavt which will walk a WQE and
queue work. This patch will still provide the capability to schedule that
work as well as kick the progress. These are provided to the rdmavt layer.
Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Edward Mascarenhas <edward.mascarenhas@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Return directly from rvt_resize_cq rather than use a goto/label.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The completion queue is not a complex data structure and it can be removed
at the same time as its functions. Unlike the more complicated queue pair
which was done in multiple patches. This single patch removes all traces
of hfi1 specific completeion queues from the hfi1 driver.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Removed hfi1 query_device function to use rdmavt rvt_query_device function
The rvt dev info device attributes still need to be filled in by the driver
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Rely on rdmavt to provide queue pair creation.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Another change on the way to removing queue pair functionality from
hfi1. This patch removes the private queue pair structure and the table
which holds the queue pair numbers in favor of using what is provided
by rdmavt.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use the definitions of the s_flags and r_flags which are now in rdmavt.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
IB user context alloc and dealloc functions have been added to rdmavt.
This patch removes them from hfi1.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
No need to keep providing the query pkey function. This is now being
done in rdmavt. Remove support from hfi1. The allocation and
maintenance of the list still resides in the driver.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Mmap data structure has already been moved to rdmavt and hfi1 supports
it. Now that the mmap functionality has also been moved to rdmavt its
time for hfi1 to use that as well.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove most of the ibport members from hfi1 and use the rdmavt version.
Also register the port with rdmavt.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
SRQ data structure has been moved to rdmavt. Make use of it.
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch does the actual removal of the queue pair from the hfi1 driver
along with a number of dependent data structures. These were moved to rvt.
It also removes the MR functions to use those in rdmavt.
These two pieces can not reasonably be split apart becuase they depend on
each other.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
For OPA devices additional work is required to create an AH.
This patch adds support to set the VL correctly.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Original patch from Kamal Heib <kamalh@mellanox.com>, split
apart from original and modified to accomodate recent changes
in rdmavt.
Remove AH from hfi1 and use rdmavt version.
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Rdmavt split the header files to be based on ibta object. This patch
makes changes in hfi1 to account for the move.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Implement get_card_name and get_pci_dev helper functions for rdmavt
for hfi1.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In preparation for moving the queue pair data structure to rdmavt the
members of the driver specific queue pairs which are not common need to be
pushed off to a private driver structure. This structure will be available
in the queue pair once moved to rdmavt as a void pointer. This patch while
not adding a lot of value in and of itself is a prerequisite to move the
queue pair out of the drivers and into rdmavt.
The driver specific, private queue pair data structure should condense as
more of the send side code moves to rdmavt.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove MR data structures from hfi1 and use the version in rdmavt
Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove protection domain from hfi1 and use rdmavt's version.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove the dma.c file from hfi1 in favor of using that which is
present in rdmavt.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Most functionality is still being done in the driver, set flags so that
rdmavt will let hfi1 continue to handle mr, qp, and cq init.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch begins to make use of rdmavt by registering with it and
providing access to the header files. This is just the beginning of
rdmavt support in hfi1.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
