846 Commits

Author	SHA1	Message	Date
Gregory CLEMENT	307c2bf467	clocksource: convert time-armada-370-xp to clk framework ... Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by Gregory CLEMENT <gregory.clement@free-electrons.com>	2012-11-20 14:46:49 +01:00
Gregory CLEMENT	c4c34d6084	clk: mvebu: armada 370/XP add clock gating control provider for DT ... Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>	2012-11-20 14:44:00 +01:00
Sebastian Hesselbarth	f97d0d7aa8	clk: mvebu: add clock gating control provider for DT ... This driver allows to provide DT clocks for clock gates found on Marvell Dove and Kirkwood SoCs. The clock gates are referenced by the phandle index of the corresponding bit in the clock gating control register to ease lookup in the datasheet. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>	2012-11-20 14:43:24 +01:00
Gregory CLEMENT	ab8ba01b3f	clk: mvebu: add armada-370-xp CPU specific clocks ... Add Armada 370/XP specific CPU clocks Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>	2012-11-20 14:35:42 +01:00
Sebastian Hesselbarth	97fa4cf442	clk: mvebu: add mvebu core clocks. ... This driver allows to provide DT clocks for core clocks found on Marvell Kirkwood, Dove & 370/XP SoCs. The core clock frequencies and ratios are determined by decoding the Sample-At-Reset registers. Although technically correct, using a divider of 0 will lead to div_by_zero panic. Let's use a ratio of 0/1 instead to fail later with a zero clock. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by Gregory CLEMENT <gregory.clement@free-electrons.com>	2012-11-20 14:34:08 +01:00
Dmitry Torokhov	68fe0f0a6d	Linux 3.7-rc3 ... -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.18 (GNU/Linux) iQEcBAABAgAGBQJQjYaSAAoJEHm+PkMAQRiGIlYH+wbwj7i5CcUG46VRFT5WlG7W iYaojL68FKKIUCBh4GOvZxE2D907KgqHQI6rePE/xDhK493d0Nyi4PGQJ1JoTE+l JQq++C3CoX9mm/zCRW5JyOcemE4t2t1/poi2ege9Kf9E9N5Cw0P4r8Cz1urCFKL6 EO2/gA5d6cBQpg+gVq9T88SnYgiJGs7d8AYjFeC7SrqIwDvG6tfg+YF4IRxC4QAc 0zbBgej/kbuiLbGl2ltU0I9HTOwlTgp53tdYe810cs3CdzNC2ykdF391Q24tloeo uxmCSQrA2upHA9aILqY+T5f+cMOpVS4T8Ica3N9OzVEIPXSh2K9d4tESGPikMEE= =yiDr -----END PGP SIGNATURE----- Merge tag 'v3.7-rc3' into for-linus to sync up with recent USB changes	2012-10-30 00:09:18 -07:00
Linus Torvalds	065c8012b2	arm-soc: fixes for v3.7-rc3 ... Bug fixes for a number of ARM platforms, mostly OMAP, imx and at91. These come a little later than I had hoped but unfortunately we had a few of these patches cause regressions themselves and had to work out how to deal with those in the meantime. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIVAwUAUIwDWmCrR//JCVInAQJREBAAwkH8kI/Xl3JqTfP4A69P8fOdD0p1ZC08 QHzRdgXixpssiIC2wKwM4N4Ine23p1sbGIHHjnDMyTytFXGl7RIRjIXucm3NVBq5 bw5uW5HziO8Pg+uA0ieZiqDEvroIw6U0AxKEKrZ9Fpc9XBr9RArIsRtTNyoFli+2 JBgQ5eHYq4cq3cmX1XkU4q7RVUUA6XE/Vqs9IT6dfK4x56RR0Huri/ldkxqsLNj+ HdN+7QoTz4wUjhF1tqCZt/3bo1dUONpDu4DJPnzscQA77HplQsSF3MsY5AEajjsA 8mKG6AOjmvZsqJFjGYsq/r4DerPj2ME+1z84y5xrMI5WUxJL/6fj5uGTNsdVxifW scywLEG9bRjCehgoAg26XZWNKy6NuzkONxR9fjbrj9vGopje23VT5OXgeygesUD2 WTbI3qeZz/O1esDBQ9D025K3a9kTCsJltstO2oVubGWgqvG2oK8LTqjeu8DwM2ti tloNQmylOKOaxnYm9TSouDRpQ0MPFVxMxe1VwFxzry7Mz3+lfyC2/fiYpZLC+OgQ 2TjclUB4aIXLPVJAsAxu9Z8vEhx11EtghkeWy5Hk4TT3dXgn77MnyAPWp594DjQ0 WdHrCNCK+K0Kk7R2FDkaZi2CvdCd1+AS6xyXjO3CmA7HbWLDEUlRg4/24/AzLK3j rO+bw62yQKg= =IDdm -----END PGP SIGNATURE----- Merge tag 'fixes-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc fixes from Arnd Bergmann: "Bug fixes for a number of ARM platforms, mostly OMAP, imx and at91. These come a little later than I had hoped but unfortunately we had a few of these patches cause regressions themselves and had to work out how to deal with those in the meantime." * tag 'fixes-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) Revert "ARM i.MX25: Fix PWM per clock lookups" ARM: versatile: fix versatile_defconfig ARM: mvebu: update defconfig with 3.7 changes ARM: at91: fix at91x40 build ARM: socfpga: Fix socfpga compilation with early_printk() enabled ARM: SPEAr: Remove unused empty files MAINTAINERS: Add arm-soc tree entry ARM: dts: mxs: add the "clock-names" for gpmi-nand ARM: ux500: Correct SDI5 address and add some format changes ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DT ARM: ux500: Fix build error relating to IRQCHIP_SKIP_SET_WAKE ARM: at91: drop duplicated config SOC_AT91SAM9 entry ARM: at91/i2c: change id to let i2c-at91 work ARM: at91/i2c: change id to let i2c-gpio work ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels. ARM: at91: fix external interrupt specification in board code ARM: at91: fix external interrupts in non-DT case ARM: at91: at91sam9g10: fix SOC type detection ARM: at91/tc: fix typo in the DT document ARM: AM33XX: Fix configuration of dmtimer parent clock by dmtimer driverDate:Wed, 17 Oct 2012 13:55:55 -0500 ...	2012-10-28 11:12:38 -07:00
Hui Wang	ae495e844a	Input: egalax_ts - get gpio from devicetree ... The irq_to_gpio() is old, most platforms use GENERIC_GPIO framework and don't support this API anymore. The i.MX6q sabrelite platform equips an egalax touchscreen controller, and this platform already transfered to GENERIC_GPIO framework, to support this driver, we use a more generic way to get gpio. Add a return value checking for waking up the controller in the probe function, this guarantee only a workable device can pass init. [dmitry.torokhov@gmail.com: Make driver depend on CONFIG_OF as it is now required.] Acked-by Zhang Jiejing <jiejing.zhang@freescale.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Hui Wang <jason77.wang@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>	2012-10-25 00:38:22 -07:00
Josh Wu	11930c530f	ARM: at91/tc: fix typo in the DT document ... Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: stable <stable@vger.kernel.org> [v3.4]	2012-10-24 18:04:08 +02:00
Pritesh Raithatha	d6ec6b60a5	dt: Document: correct tegra20/30 pinctrl slew-rate name ... change nvidia,slew_rate* to nvidia,slew-rate* Cc: stable@kernel.org Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>	2012-10-17 19:45:35 +02:00
Linus Torvalds	12250d843e	Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux ... Pull i2c-embedded changes from Wolfram Sang: "The changes for i2c-embedded include: - massive rework of the omap driver - massive rework of the at91 driver. In fact, the old driver gets removed; I am okay with this approach since the old driver was depending on BROKEN and its limitations made it practically unusable, so people used bitbanging instead. But even if there are users, there is no platform_data or module parameter which would need to be converted. It is just another driver doing I2C transfers, just way better. Modifications of arch/arm/at91 related files have proper acks from the maintainer. - new driver for R-Car I2C - devicetree and generic_clock conversions and fixes - usual driver fixes and changes. The rework patches have come a long way and lots of people have been involved in creating/testing them. Most patches have been in linux-next at least since 3.6-rc5. A few have been added in the last week, I have to admit. An unexpected (but welcome :)) peak in private life is the cause for that. The "late" patches shouldn't cause any merge conflicts and I will have a special eye on them during the stabilization phase. This is an exception and I want to have the patches in place properly in time again for the next kernels." * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (44 commits) MXS: Implement DMA support into mxs-i2c i2c: add Renesas R-Car I2C driver i2c: s3c2410: use clk_prepare_enable and clk_disable_unprepare ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints i2c: nomadik: Add Device Tree support to the Nomadik I2C driver i2c: algo: pca: Fix chip reset function for PCA9665 i2c: mpc: Wait for STOP to hit the bus i2c: davinci: preparation for switch to common clock framework omap-i2c: fix incorrect log message when using a device tree i2c: omap: sanitize exit path i2c: omap: switch over to autosuspend API i2c: omap: remove unnecessary pm_runtime_suspended check i2c: omap: switch to threaded IRQ support i2c: omap: remove redundant status read i2c: omap: get rid of the "complete" label i2c: omap: resize fifos before each message i2c: omap: simplify IRQ exit path i2c: omap: always return IRQ_HANDLED i2c: omap: simplify errata check i2c: omap: bus: add a receiver flag ...	2012-10-11 10:27:51 +09:00
Linus Torvalds	da06a8d7be	ARM: SoC fixes ... A series of fixes (and in some cases, some cleanups): Via Tony Lindgren: - A collection of OMAP regression fixes, in particular because firmware no longer sets up all pin states before starting the kernel. - cpufreq fixes for OMAP (Rafael is on vacation and this was pre-agreed). - A longer series of misc regression fixes and cleanups, warning removals, etc for OMAP From Arnd Bergmann: - A series of warning fixes for various platforms (defconfig builds) Misc: - A couple of tegra fixes, one for i.MX, some vt8500 fixes, etc. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJQdeoEAAoJEIwa5zzehBx3odkP/2Z7UwXYYja63dmUYErWSQJU CtPa5U7UlbM9hWVzuGplCBbNuDEmZ8PlUboiX0Q0ml0Jl4KtOYAbuq6st96Vmn9z z6VkApTzAmlo1p8C+Y/liEL3Kr9PKV4zWi4VMLDUgSiP65hVtbe/hEjRSty14iTC sF5Ao42YO0y8L1e7d2OSbK0DQyHCnk/cbOQJnzaX5fN31uE2GSM4nFY1ty5gb3aB +LyyGx6pd26LxsGYtLIzlpV+qkFeGcGAU16pJj10Xo4UNKUjwVfq2k1Nn0t4I06f 1gs+lGRqfj2ciVTIdJd+OUFb2gI0DfLhASzb6efQzggOTDHxNFyew8+Yve82muEA 0G2as/yW9GSGw1Zdkh4FCtr/1VgORTsXWEPCSx+oWn1hCOn5PtcGHYjYBpPh/drb EhYioL3s5ZzXT2+RhKf3JEfFNEupyPrTFsNpGtNSjB7b5XkSU39BcykXc/ghXmeB XOrcOO5cvsGVcEcKJjJaPtYznkULh/aU8mu+/D0AZFW24ke8ya1mR5t6W0+PBEnL sePinBHWKzLtswQrij0NKT781SqZAFwqvlAh+t5kwOo68m1E3Kt6afjZ0B4dsJlG XIcxUyHeE+LvJgy/IOIOJUflnmUgghvUtbsHL5SIjssmijHrzYpu/ikfYCt+Ti0f CAzGeHrS41sGAnN4vWit =vAh+ -----END PGP SIGNATURE----- Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A series of fixes (and in some cases, some cleanups): Via Tony Lindgren: - A collection of OMAP regression fixes, in particular because firmware no longer sets up all pin states before starting the kernel. - cpufreq fixes for OMAP (Rafael is on vacation and this was pre-agreed). - A longer series of misc regression fixes and cleanups, warning removals, etc for OMAP From Arnd Bergmann: - A series of warning fixes for various platforms (defconfig builds) Misc: - A couple of tegra fixes, one for i.MX, some vt8500 fixes, etc." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits) ARM: pxa: armcore: fix PCI PIO warnings ARM: integrator: use __iomem pointers for MMIO, part 2 ARM: assabet: fix bogus warning in get_assabet_scr (again) ARM: shmobile: mark shmobile_init_late as __init ARM: integrator_cp: fix build failure ARM: OMAP4/AM335x: hwmod: fix disable_module regression in hardreset handling ARM: OMAP3: fix workaround for EMU clockdomain arm/omap: Replace board_ref_clock with enum values ARM: OMAP2+: remove duplicated include from board-omap3stalker.c arch/arm/plat-omap/omap-pm-noop.c: Remove unecessary semicolon arch/arm/mach-omap2: Remove unecessary semicolon arch/arm/mach-omap1/devices.c: Remove unecessary semicolon ARM/dts: omap5-evm: pinmux configuration for audio ARM/dts: Add pinctrl driver entries for omap5 ARM/dts: omap4-panda: pinmux configuration for audio ARM/dts: omap4-sdp: pinmux configuration for audio ARM/dts: omap5-evm: Disable unused McBSP3 ARM/dts: omap4-sdp: Disable unused McBSP3 ARM/dts: omap4-panda: Disable unused audio IPs ARM: OMAP: board-omap4panda: Pin mux configuration for audio needs ...	2012-10-11 10:21:48 +09:00
Linus Torvalds	2474542f64	pwm: Changes for v3.7-rc1 ... All legacy PWM providers have now been moved to the PWM subsystem. The plan for 3.8 is to adapt all board files to provide a lookup table for PWM devices in order to get rid of the global namespace. Subsequently, users of the legacy pwm_request() and pwm_free() functions can be migrated to the new pwm_get() and pwm_put() functions. Once this has been completed, the legacy API and the compatibility code in the core can be removed. In addition to the above, these changes also add support for configuring the polarity of a PWM signal (currently only supported on ECAP and EHRPWM) and include a much needed rework of the i.MX driver. Managed functions to obtain and release a PWM device (devm_pwm_get() and devm_pwm_put()) have been added and the pwm-backlight driver has been updated to use them. If the PWM subsystem hasn't been enabled, dummy functions are provided that allow the subsystem to safely compile out. Some common checks on input parameters have been moved to the core and removed from the drivers. Finally, a small fix corrects the description of the PWM specifier's second cell in the device tree representation. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iQIcBAABAgAGBQJQcV6pAAoJEN0jrNd/PrOh594P/3NHPjnTiyAZpUICX4mJeoMd 1rX685HofCyX5jlHloS1pLRXYtIPZP97We5crNR/k/RujKcHAqAFzLtG2Jj93gxm nRUwLZ4xbrAgeaZeJV8YG1naWx9R1OjrK2sv+FyHRWsn9UZus2vDMV7tB0oNWo9k DMhtF1q7gQxx4nRu8z9FFybyItQinVREODNs+Gdv6AOJ36t+mOsGPL3LKZeFsIG3 LdaB1p3t/07Job4KwGYYRjkOR7bIQ+ADnnO8Pkk0a9lxkMI8rA0uFbLwgyx7Hohh xZtm8R5il2IlHwqh52RzpShceWICxCZ3htuIXTRbVa1PSEsBzZ66W2CT7sy1jPm5 lJlHgc7abaiwijtoG76I+Lgslv5UTViBuIYHSX4dH2kF3Jgm2SgTBNzZYePI5MMT BI3xc9WnwBpxgMybJsPHfU0Ff6O/9h9ab7q5lBOHkQJittahYxzWD+FgYlalcAa+ I919iFREKNZytewLnXu+4TG0RfacQoj6D5G+SquOGmXyKYRhhJ1O6WodnRZHi/0n M6J0f6fLxpomI1RMn44VYP43OPJCDYxgXYoDLwCZQL9tSWYpdhXoDrjcIPO547w1 ZS5HTXUE4DrxeYjoeqL555vtQIooM9CuH4JwKlz5zzea8NPC8eVtmNFTTWE6wKWX ZIOOLVvw/FI0/DSjBb8H =MQ5V -----END PGP SIGNATURE----- Merge tag 'for-3.7-rc1' of git://gitorious.org/linux-pwm/linux-pwm Pull pwm changes from Thierry Reding: "All legacy PWM providers have now been moved to the PWM subsystem. The plan for 3.8 is to adapt all board files to provide a lookup table for PWM devices in order to get rid of the global namespace. Subsequently, users of the legacy pwm_request() and pwm_free() functions can be migrated to the new pwm_get() and pwm_put() functions. Once this has been completed, the legacy API and the compatibility code in the core can be removed. In addition to the above, these changes also add support for configuring the polarity of a PWM signal (currently only supported on ECAP and EHRPWM) and include a much needed rework of the i.MX driver. Managed functions to obtain and release a PWM device (devm_pwm_get() and devm_pwm_put()) have been added and the pwm-backlight driver has been updated to use them. If the PWM subsystem hasn't been enabled, dummy functions are provided that allow the subsystem to safely compile out. Some common checks on input parameters have been moved to the core and removed from the drivers. Finally, a small fix corrects the description of the PWM specifier's second cell in the device tree representation." * tag 'for-3.7-rc1' of git://gitorious.org/linux-pwm/linux-pwm: (23 commits) pwm: dt: Fix description of second PWM cell pwm: Check for negative duty-cycle and period pwm: Add Ingenic JZ4740 support MIPS: JZ4740: Export timer API pwm: Move PUV3 PWM driver to PWM framework unicore32: pwm: Use managed resource allocations unicore32: pwm: Remove unnecessary indirection unicore32: pwm: Use module_platform_driver() unicore32: pwm: Properly remap memory-mapped registers pwm-backlight: Use devm_pwm_get() instead of pwm_get() pwm: Move AB8500 PWM driver to PWM framework pwm: Fix compilation error when CONFIG_PWM is not defined pwm: i.MX: fix clock lookup pwm: i.MX: use per clock unconditionally pwm: i.MX: add devicetree support pwm: i.MX: Use module_platform_driver pwm: i.MX: add functions to enable/disable pwm. pwm: i.MX: remove unnecessary if in pwm_[en|dis]able pwm: i.MX: factor out SoC specific functions pwm: pwm-tiehrpwm: Add support for configuring polarity of PWM ...	2012-10-10 20:15:24 +09:00
Linus Torvalds	943c2acea5	MMC highlights for 3.7: ... Core: - Add DT properties for card detection (broken-cd, cd-gpios, non-removable) - Don't poll non-removable devices - Fixup/rework eMMC sleep mode/"power off notify" feature - Support eMMC background operations (BKOPS). To set the one-time programmable fuse that enables bkops on an eMMC that doesn't already have it set, you can use the "mmc bkops enable" command in: git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git Drivers: - atmel-mci, dw_mmc, pxa-mci, dove, s3c, spear: Add device tree support - bfin_sdh: Add support for the controller in bf60x - dw_mmc: Support Samsung Exynos SoCs - eSDHC: Add ADMA support - sdhci: Support testing a cd-gpio (from slot-gpio) instead of presence bit - sdhci-pltfm: Support broken-cd DT property - tegra: Convert to only supporting DT (mach-tegra has gone DT-only) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAABAgAGBQJQcfc/AAoJEHNBYZ7TNxYMB3wQALPObZUjKBsR38N2llPUOz5M nTMNYa99Pg3/Du5EgXKwYDkoYG1M9yjNTdxBmz3Sz9cIkLueZHoDmqvpgZJv9vRn 5l0TncExC+T2Tn7qjE5axgM7fus5r9SLKCOtbE+V8jATTWeG0d/X0DdzvKPpJLmb uLPmqNG50LdQQUoCkcDU3hiDONqQnOx4tDq4C7rTlf+Cr8pJXRoBPEF0C1PTvs64 0AP8oXDtirz+RIR5xTELy08o4SVS4Wcn63PH1H56kmAIjdT5FeVnAOeyF9Aer/+R Sz3qMrN/sNSEEkbgCGQLJVVYACNdgB1WXdxhqk2d996iwtEQgkVB8S2ziyhpZTZ2 SxgCMvfYf5ySOIuzvyEScGdKjw6DSV01HDr9eyFJqIYaDOBp+kUJkbM2O8ISf+Kb rudrc58mdfPPhX5rqjEYBKGtyC6q+LvRGOwO8QJNvZ0wAFAg4nCzcD9btAl65QR1 7aM0qp+55pyc2xyUO9q5AvOwiaBU2sYYuBCUm1zzK3HQ8x5ZKpueQwa2KBmEa2f+ Qp6oflWNeG/X53WHCurl/ECZY5Y4w4esHPMWXVXJP8Ao+3D2Wofkp4CSGcQClZSd /OBGSw9g70BIKwOTUvU9tD3ALQsG+A9UHmG7RQBhmcQFaKY709bfhzSG3/jHymSg AKr0VSezE/DTj6URvxaq =qyY5 -----END PGP SIGNATURE----- Merge tag 'mmc-merge-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "Core: - Add DT properties for card detection (broken-cd, cd-gpios, non-removable) - Don't poll non-removable devices - Fixup/rework eMMC sleep mode/"power off notify" feature - Support eMMC background operations (BKOPS). To set the one-time programmable fuse that enables bkops on an eMMC that doesn't already have it set, you can use the "mmc bkops enable" command in: git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git Drivers: - atmel-mci, dw_mmc, pxa-mci, dove, s3c, spear: Add device tree support - bfin_sdh: Add support for the controller in bf60x - dw_mmc: Support Samsung Exynos SoCs - eSDHC: Add ADMA support - sdhci: Support testing a cd-gpio (from slot-gpio) instead of presence bit - sdhci-pltfm: Support broken-cd DT property - tegra: Convert to only supporting DT (mach-tegra has gone DT-only)" * tag 'mmc-merge-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (67 commits) mmc: core: Fixup broken suspend and eMMC4.5 power off notify mmc: sdhci-spear: Add clk_{un}prepare() support mmc: sdhci-spear: add device tree bindings mmc: sdhci-s3c: Add clk_(enable/disable) in runtime suspend/resume mmc: core: Replace MMC_CAP2_BROKEN_VOLTAGE with test for fixed regulator mmc: sdhci-pxav3: Use sdhci_get_of_property for parsing DT quirks mmc: dt: Support "broken-cd" property in sdhci-pltfm mmc: sdhci-s3c: fix the wrong number of max bus clocks mmc: sh-mmcif: avoid oops on spurious interrupts mmc: sh-mmcif: properly handle MMC_WRITE_MULTIPLE_BLOCK completion IRQ mmc: sdhci-s3c: Fix crash on module insertion for second time mmc: sdhci-s3c: Enable only required bus clock mmc: Revert "mmc: dw_mmc: Add check for IDMAC configuration" mmc: mxcmmc: fix bug that may block a data transfer forever mmc: omap_hsmmc: Pass on the suspend failure to the PM core mmc: atmel-mci: AP700x PDC is not connected to MCI mmc: atmel-mci: DMA can be used with other controllers mmc: mmci: use clk_prepare_enable and clk_disable_unprepare mmc: sdhci-s3c: Add device tree support mmc: dw_mmc: add support for exynos specific implementation of dw-mshc ...	2012-10-10 10:58:42 +09:00
David Woodhouse	ffe3150125	UAPI Disintegration 2012-10-09 ... -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIVAwUAUHPmWhOxKuMESys7AQLCZRAAsZAuAK0MxZ4iuq/+fmy7Uxb1jrzLOYSb 3UgbTgXAjR0WAUHNegVZLX1Xc+12KxvMCj/8sO62Ai+wtgHeDAuUl2T0FbSZjlGK qqx/qQqTFHUfJRbm3Lu9iarZ2K49v1kTDk4C+nC8J9mEEW4WFlVPD10n90j+4hxr ZCEYril7qOQQV65oor3BT2V64+X1WDHriTLugH1o8RziRF9jh6Z2hgZAWnThcGxu lPsmXF2e7jDqGcM3gWtxZWu/yTBPxw549R+JUg4aVKho9WI5ClyjNAKnE7wtd3iW HyrylRH+ch2oeYFa5+xoyopRARUUPmujKaHU+ZI1o++eNzuw5JYiwuMlZBLyUc9I foWMSUw31U7695exyf66HiH7GEKI1PVpgJVNu41eJvl0iWSWCpKCB6Gs8Sw4xnp2 auUCYSniXHNTFhFktjNdIUAn0+1X/b/SEfb/id4GvLp1K98QGOfe8dMCC8hEnXiF 4iIViM8Sv1GB1us5huSjbMeRPbZ3x/loqEpApfgcaqcyrUR29FTE/lFQ4fj9xviL JjckPLMMZb4Ho5wrkCi5NtXJ16mx1qKzbBGDdqzmqaNdN+08rNF//kA9m9hCwgD8 XfAV286DKDC0SllZIG+Uz7YLnSZjNAUhjvWN3ipV+SdT5DGybL3uSW5tYiSAzI2E 3cayGTWINMg= =U9Qq -----END PGP SIGNATURE----- Merge tag 'disintegrate-mtd-20121009' of git://git.infradead.org/users/dhowells/linux-headers UAPI Disintegration 2012-10-09 Conflicts: MAINTAINERS arch/arm/configs/bcmring_defconfig arch/arm/mach-imx/clk-imx51-imx53.c drivers/mtd/nand/Kconfig drivers/mtd/nand/bcm_umi_nand.c drivers/mtd/nand/nand_bcm_umi.h drivers/mtd/nand/orion_nand.c	2012-10-09 15:04:25 +01:00
Linus Torvalds	de390bba79	Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus ... Pull MIPS update from Ralf Baechle: "This is the MIPS update for 3.7. A fair chunk of them are platform updates to the Cavium Octeon SOC (which involves machine generated header files of considerable size), Atheros ATH79xx, RMI aka Netlogic aka Broadcom XLP, Broadcom BCM63xx platforms. Support for the commercial MIPS simulator MIPSsim has been removed as MIPS Technologies is shifting away from this product and Qemu is offering various more powerful platforms. The generic MIPS code can now also probe for no-execute / write-only TLB features implemented without the full SmartMIPS extension as permitted by the latest MIPS processor architecture. Lots of small changes to generic code." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (78 commits) MIPS: ath79: Fix CPU/DDR frequency calculation for SRIF PLLs MIPS: ath79: use correct fractional dividers for {CPU,DDR}_PLL on AR934x MIPS: BCM63XX: Properly handle mac address octet overflow MIPS: Kconfig: Avoid build errors by hiding USE_OF from the user. MIPS: Replace `-' in defconfig filename wth `_' for consistency. MIPS: Wire kcmp syscall. MIPS: MIPSsim: Remove the MIPSsim platform. MIPS: NOTIFY_RESUME is not needed in TIF masks MIPS: Merge the identical "return from syscall" per-ABI code MIPS: Unobfuscate _TIF..._MASK MIPS: Prevent hitting do_notify_resume() with !user_mode(regs). MIPS: Replace 'kernel_uses_smartmips_rixi' with 'cpu_has_rixi'. MIPS: Add base architecture support for RI and XI. MIPS: Optimise TLB handlers for MIPS32/64 R2 cores. MIPS: uasm: Add INS and EXT instructions. MIPS: Avoid pipeline stalls on some MIPS32R2 cores. MIPS: Make VPE count to be one-based. MIPS: Add new end of interrupt functionality for GIC. MIPS: Add EIC support for GIC. MIPS: Code clean-ups for the GIC. ...	2012-10-09 16:08:04 +09:00
Linus Torvalds	f5a246eab9	Sound updates for 3.7-rc1 ... This contains pretty many small commits covering fairly large range of files in sound/ directory. Partly because of additional API support and partly because of constantly developed ASoC and ARM stuff. Some highlights: - Introduced the helper function and documentation for exposing the channel map via control API, as discussed in Plumbers; most of PCI drivers are covered, will follow more drivers later - Most of drivers have been replaced with the new PM callbacks (if the bus is supported) - HD-audio controller got the support of runtime PM and the support of D3 clock-stop. Also changing the power_save option in sysfs kicks off immediately to enable / disable the power-save mode. - Another significant code change in HD-audio is the rewrite of firmware loading code. Other than that, most of changes in HD-audio are continued cleanups and standardization for the generic auto parser and bug fixes (HBR, device-specific fixups), in addition to the support of channel-map API. - Addition of ASoC bindings for the compressed API, used by the mid-x86 drivers. - Lots of cleanups and API refreshes for ASoC codec drivers and DaVinci. - Conversion of OMAP to dmaengine. - New machine driver for Wolfson Microelectronics Bells. - New CODEC driver for Wolfson Microelectronics WM0010. - Enhancements to the ux500 and wm2000 drivers - A new driver for DA9055 and the support for regulator bypass mode. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iQIcBAABAgAGBQJQcpeWAAoJEGwxgFQ9KSmkpi4P/2etDDz5aEkEHNa1l4xEmFcm ymiGTgjaalqpUAVbM/gYx9G59EFMEbzUl1BHAqE5La4wO/v9lNPb+VrdUo+B+NZ7 WSxIPWcNqdinSuoSqyYPjoPMVnhs3EMtNOqmf4jm1JOvdqA+4rO29xQVAqK/5Gfu LpMOyPiRi5ODnbQ1BOIWwpKICioY/mLwGJudK3z0i/fYVA7gLub20f+w+sOjKIA4 wmwQAMTjAR798Cg/tVy4fQmf4SLw+c2nIgGe/PD+2gVlGXLNKBrJfMonHPTbmwKu lmJO/EtnijNOnpbn6up7ryUQ9cSoZAUZOfdIOgmAeQgQ/LWR0f+zf2IQehSPwrul g6hqOnQI2DNN7ugT3cYVbYnsh56TjyhnxhhxZgkapqh706QkqHGyKJNMRetzuXmP 1O//MnZJrFQWd6sOKLlTL2ZzRvnxEJcNVGaE6bbwZTfQMtPeo9l1842uIq1dLUtG VxZb/svKUkMXv4is1dwUYUkpDsKxsgMEmabmuovceGf2N7jj/irkXgqxf6LWkaY1 JQ7ZFWUJyDzEMXRaFfzdGO15T532CfB84wvFX5xoPMwMste2AA7QuybFBVstXhKu AtKNDgRJFUTlnLIxydpPBWdWH3UJdEaFwwsSfuNKI8OmmGKhWC/aP83k4hzueu9H KYLvY/0ObMSMqiwh/ndQ =uNqD -----END PGP SIGNATURE----- Merge tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This contains pretty many small commits covering fairly large range of files in sound/ directory. Partly because of additional API support and partly because of constantly developed ASoC and ARM stuff. Some highlights: - Introduced the helper function and documentation for exposing the channel map via control API, as discussed in Plumbers; most of PCI drivers are covered, will follow more drivers later - Most of drivers have been replaced with the new PM callbacks (if the bus is supported) - HD-audio controller got the support of runtime PM and the support of D3 clock-stop. Also changing the power_save option in sysfs kicks off immediately to enable / disable the power-save mode. - Another significant code change in HD-audio is the rewrite of firmware loading code. Other than that, most of changes in HD-audio are continued cleanups and standardization for the generic auto parser and bug fixes (HBR, device-specific fixups), in addition to the support of channel-map API. - Addition of ASoC bindings for the compressed API, used by the mid-x86 drivers. - Lots of cleanups and API refreshes for ASoC codec drivers and DaVinci. - Conversion of OMAP to dmaengine. - New machine driver for Wolfson Microelectronics Bells. - New CODEC driver for Wolfson Microelectronics WM0010. - Enhancements to the ux500 and wm2000 drivers - A new driver for DA9055 and the support for regulator bypass mode." Fix up various arm soc header file reorg conflicts. * tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (339 commits) ALSA: hda - Add new codec ALC283 ALC290 support ALSA: hda - avoid unneccesary indices on "Headphone Jack" controls ALSA: hda - fix indices on boost volume on Conexant ALSA: aloop - add locking to timer access ALSA: hda - Fix hang caused by race during suspend. sound: Remove unnecessary semicolon ALSA: hda/realtek - Fix detection of ALC271X codec ALSA: hda - Add inverted internal mic quirk for Lenovo IdeaPad U310 ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event ALSA: hda - make a generic unsol event handler ASoC: codecs: Add DA9055 codec driver ASoC: eukrea-tlv320: Convert it to platform driver ALSA: ASoC: add DT bindings for CS4271 ASoC: wm_hubs: Ensure volume updates are handled during class W startup ASoC: wm5110: Adding missing volume update bits ASoC: wm5110: Add OUT3R support ASoC: wm5110: Add AEC loopback support ASoC: wm5110: Rename EPOUT to HPOUT3 ASoC: arizona: Add more clock rates ASoC: arizona: Add more DSP options for mixer input muxes ...	2012-10-09 07:07:14 +09:00
Marek Vasut	62885f59a2	MXS: Implement DMA support into mxs-i2c ... This patch implements DMA support into mxs-i2c. DMA transfers are now enabled via DT. The DMA operation is enabled by default. Signed-off-by: Marek Vasut <marex@denx.de> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> [wsa: rebased to 3.6-rc7] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>	2012-10-08 12:47:33 +02:00
Viresh Kumar	da764f97df	mmc: sdhci-spear: Add clk_{un}prepare() support ... clk_{un}prepare is mandatory for platforms using common clock framework. Since this driver is used by SPEAr platform, which supports common clock framework, add clk_{un}prepare() support for it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>	2012-10-07 17:41:45 -04:00
Viresh Kumar	067bf748bd	mmc: sdhci-spear: add device tree bindings ... This adds simple DT bindings for SDHCI SPEAr controller. It uses cd-gpios from common mmc bindings. This also fixes spear300-evb.dts with correct name for card detect binding. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>	2012-10-07 17:41:44 -04:00
Stephen Warren	53f4035282	ARM: bcm2835: fix typos in DT binding documentation ... The compatible value shouldn't include ".txt", which was probably cut and paste from the filename. Reported-by: Domenico Andreoli <cavokz@gmail.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Olof Johansson <olof@lixom.net>	2012-10-07 07:02:07 -07:00
Linus Torvalds	0e51793e16	Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm ... Pull ARM updates from Russell King: "This is the first chunk of ARM updates for this merge window. Conflicts are expected in two files - asm/timex.h and mach-integrator/integrator_cp.c. Nothing particularly stands out more than anything else. Most of the growth is down to the opcodes stuff from Dave Martin, which is countered by Rob's patches to use more of the asm-generic headers on ARM." (A few more conflicts grew since then, but it all looked fairly trivial) * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (44 commits) ARM: 7548/1: include linux/sched.h in syscall.h ARM: 7541/1: Add ARM ERRATA 775420 workaround ARM: ensure vm_struct has its phys_addr member filled in ARM: 7540/1: kexec: Check segment memory addresses ARM: 7539/1: kexec: scan for dtb magic in segments ARM: 7538/1: delay: add registration mechanism for delay timer sources ARM: 7536/1: smp: Formalize an IPI for wakeup ARM: 7525/1: ptrace: use updated syscall number for syscall auditing ARM: 7524/1: support syscall tracing ARM: 7519/1: integrator: convert platform devices to Device Tree ARM: 7518/1: integrator: convert AMBA devices to device tree ARM: 7517/1: integrator: initial device tree support ARM: 7516/1: plat-versatile: add DT support to FPGA IRQ ARM: 7515/1: integrator: check PL010 base address from resource ARM: 7514/1: integrator: call common init function from machine ARM: 7522/1: arch_timers: register a time/cycle counter ARM: 7523/1: arch_timers: enable the use of the virtual timer ARM: 7531/1: mark kernelmode mem{cpy,set} non-experimental ARM: 7520/1: Build dtb files in all target ARM: Fix build warning in arch/arm/mm/alignment.c ...	2012-10-07 21:20:57 +09:00
Linus Torvalds	5e090ed7af	ARM: soc: late platform updates ... This branch contains updates to OMAP and Marvell platforms (kirkwood, dove, mvebu) that came in after we had done the big multiplatform merges, so they were kept separate from the rest, and not separated into the traditional topics of cleanup/driver/platform features. For OMAP, the updates are: - Runtime PM conversions for the GPMC and RNG IP blocks - Preparation patches for the OMAP common clock framework conversion - clkdev alias additions required by other drivers - Performance Monitoring Unit (PMU) support for OMAP2, 3, and non-4430 OMAP4 - OMAP hwmod code and data improvements - Preparation patches for the IOMMU runtime PM conversion - Preparation patches for OMAP4 full-chip retention support For Kirkwood/Dove/mvebu: - New driver for "address decoder controller" for mvebu, which is a piece of hardware that configures addressable devices and peripherals. First user is the boot rom aperture on armada XP since it is needed for SMP support. - New device tree bindings for peripherals such as gpio-fan, iconnect nand, mv_cesa and the above address decoder controller. - Some defconfig updates, mostly to enable new DT boards and a few drivers. - New drivers using the pincontrol subsystem for dove, kirkwood and mvebu - New clean gpio driver for mvebu -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJQblIiAAoJEIwa5zzehBx3J1EP/1pxMqjVKQDXxak+A6g8a7r0 hUTjqfiA9nZ4st+nk3PKJL9DNkoTEoZZqXghYRA+N6ej4hAaFJX1izgQDtjtjfRE s2izZuxGka8Oiic6FpCUoQnMORg10tSLgyvlHNW4hXy3qpe2C4u1D2GJwA/GPeLQ lHREekcJ3RKWutpG2hMtCT+9Bm4AwnnMY5uO39gxoXeMn6RoaACNIyYxz0NeL5bV GDuawi7Pc4KJTXX+D/VU0o7VtksiUO8YBczFEra/9khSL/RI2PFalIX3DKiioqvA yUA11d9proqojIdfdjVRPBHnIMl49H8ohBwbQfKnkNz9msl1BKN5PbakKls97mQ+ vaJpoACnc/3x4P/izEpwry5XqeIl5S5mwz4R4+fojpWpp4JPcly/cAKMAsXf5WRi NF50E4D/8ysHE8WuBU5YHFgEEbn3nXkRbNMgdYtUwzixdmNJNaU8+33BJo34c4j0 DNktiEdKUBoiiEdsC1MgH86olD/sFNUxvXBub30hhOywoapgQE61fGQGxG38DV/K kspTHz9SKUrmgbYEyMNOhz4paRrheYxx9cAgKP7Hp7m4Gu8d6ZqRqLqN9hbAbLuW TbH2FpqcjSw4KnYYCepTixJ3dhGiICiILWHfsW3qCj5Le3YVwedCpBCL1/I+RqEP kYTToVhur/T1yamHAmBi =xVaJ -----END PGP SIGNATURE----- Merge tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull late ARM soc platform updates from Olof Johansson: "This branch contains updates to OMAP and Marvell platforms (kirkwood, dove, mvebu) that came in after we had done the big multiplatform merges, so they were kept separate from the rest, and not separated into the traditional topics of cleanup/driver/platform features. For OMAP, the updates are: - Runtime PM conversions for the GPMC and RNG IP blocks - Preparation patches for the OMAP common clock framework conversion - clkdev alias additions required by other drivers - Performance Monitoring Unit (PMU) support for OMAP2, 3, and non-4430 OMAP4 - OMAP hwmod code and data improvements - Preparation patches for the IOMMU runtime PM conversion - Preparation patches for OMAP4 full-chip retention support For Kirkwood/Dove/mvebu: - New driver for "address decoder controller" for mvebu, which is a piece of hardware that configures addressable devices and peripherals. First user is the boot rom aperture on armada XP since it is needed for SMP support. - New device tree bindings for peripherals such as gpio-fan, iconnect nand, mv_cesa and the above address decoder controller. - Some defconfig updates, mostly to enable new DT boards and a few drivers. - New drivers using the pincontrol subsystem for dove, kirkwood and mvebu - New clean gpio driver for mvebu" * tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (98 commits) ARM: mvebu: fix build breaks from multi-platform conversion ARM: OMAP4460/4470: PMU: Enable PMU for OMAP4460/70 ARM: OMAP2+: PMU: Add runtime PM support ARM: OMAP4430: PMU: prepare to create PMU device via HWMOD ARM: OMAP2+: PMU: Convert OMAP2/3 devices to use HWMOD ARM: OMAP3: hwmod data: Add debugss HWMOD data ARM: OMAP2+: clockdomain/hwmod: add workaround for EMU clockdomain idle problems ARM: OMAP: Add a timer attribute for timers that can interrupt the DSP hwrng: OMAP: remove SoC restrictions from driver registration ARM: OMAP: split OMAP1, OMAP2+ RNG device registration hwrng: OMAP: convert to use runtime PM hwrng: OMAP: store per-device data in per-device variables, not file statics ARM: OMAP2xxx: hwmod/CM: add RNG integration data ARM: OMAP2+: gpmc: minimal driver support ARM: OMAP2+: gpmc: Adapt to HWMOD ARM: OMAP2/3: hwmod data: add gpmc ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp ARM: OMAP3: hwmod data: add mmu data for iva and isp ARM: OMAP: iommu: fix including iommu.h without IOMMU_API selected ARM: OMAP4: hwmod data: add missing HWMOD_NO_IDLEST flags to some PRCM IP blocks ...	2012-10-07 20:55:16 +09:00
Thierry Reding	85f8879ca4	pwm: dt: Fix description of second PWM cell ... The second cell in the PWM specifier denotes the period in nanoseconds, not the duty cycle. The latter can be freely configured at runtime and a PWM with a fixed duty cycle would be rather pointless. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: "Benoît Thébaudeau" <benoit.thebaudeau@advansee.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org>	2012-10-07 12:11:53 +02:00
Linus Torvalds	f1c6872e49	Features: ... * Allow a Linux guest to boot as initial domain and as normal guests on Xen on ARM (specifically ARMv7 with virtualized extensions). PV console, block and network frontend/backends are working. Bug-fixes: * Fix compile linux-next fallout. * Fix PVHVM bootup crashing. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQEcBAABAgAGBQJQbJELAAoJEFjIrFwIi8fJSI4H/32qrQKyF5IIkFKHTN9FYDC1 OxEGc4y47DIQpGUd/PgZ/i6h9Iyhj+I6pb4lCevykwgd0j83noepluZlCIcJnTfL HVXNiRIQKqFhqKdjTANxVM4APup+7Lqrvqj6OZfUuoxaZ3tSTLhabJ/7UXf2+9xy g2RfZtbSdQ1sukQ/A2MeGQNT79rh7v7PrYQUYSrqytjSjSLPTqRf75HWQ+eapIAH X3aVz8Tn6nTixZWvZOK7rAaD4awsFxGP6E46oFekB02f4x9nWHJiCZiXwb35lORb tz9F9td99f6N4fPJ9LgcYTaCPwzVnceZKqE9hGfip4uT+0WrEqDxq8QmBqI5YtI= =gxJD -----END PGP SIGNATURE----- Merge tag 'stable/for-linus-3.7-arm-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull ADM Xen support from Konrad Rzeszutek Wilk: Features: * Allow a Linux guest to boot as initial domain and as normal guests on Xen on ARM (specifically ARMv7 with virtualized extensions). PV console, block and network frontend/backends are working. Bug-fixes: * Fix compile linux-next fallout. * Fix PVHVM bootup crashing. The Xen-unstable hypervisor (so will be 4.3 in a ~6 months), supports ARMv7 platforms. The goal in implementing this architecture is to exploit the hardware as much as possible. That means use as little as possible of PV operations (so no PV MMU) - and use existing PV drivers for I/Os (network, block, console, etc). This is similar to how PVHVM guests operate in X86 platform nowadays - except that on ARM there is no need for QEMU. The end result is that we share a lot of the generic Xen drivers and infrastructure. Details on how to compile/boot/etc are available at this Wiki: http://wiki.xen.org/wiki/Xen_ARMv7_with_Virtualization_Extensions and this blog has links to a technical discussion/presentations on the overall architecture: http://blog.xen.org/index.php/2012/09/21/xensummit-sessions-new-pvh-virtualisation-mode-for-arm-cortex-a15arm-servers-and-x86/ * tag 'stable/for-linus-3.7-arm-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (21 commits) xen/xen_initial_domain: check that xen_start_info is initialized xen: mark xen_init_IRQ __init xen/Makefile: fix dom-y build arm: introduce a DTS for Xen unprivileged virtual machines MAINTAINERS: add myself as Xen ARM maintainer xen/arm: compile netback xen/arm: compile blkfront and blkback xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfree xen/arm: receive Xen events on ARM xen/arm: initialize grant_table on ARM xen/arm: get privilege status xen/arm: introduce CONFIG_XEN on ARM xen: do not compile manage, balloon, pci, acpi, pcpu and cpu_hotplug on ARM xen/arm: Introduce xen_ulong_t for unsigned long xen/arm: Xen detection and shared_info page mapping docs: Xen ARM DT bindings xen/arm: empty implementation of grant_table arch specific functions xen/arm: sync_bitops xen/arm: page.h definitions xen/arm: hypercalls ...	2012-10-07 07:13:01 +09:00
Lee Jones	43fea5813c	i2c: nomadik: Add Device Tree support to the Nomadik I2C driver ... Here we apply the bindings required for successful Device Tree probing of the i2c-nomadik driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>	2012-10-06 13:20:33 +02:00
Linus Torvalds	5f3d2f2e1a	Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc ... Pull powerpc updates from Benjamin Herrenschmidt: "Some highlights in addition to the usual batch of fixes: - 64TB address space support for 64-bit processes by Aneesh Kumar - Gavin Shan did a major cleanup & re-organization of our EEH support code (IBM fancy PCI error handling & recovery infrastructure) which paves the way for supporting different platform backends, along with some rework of the PCIe code for the PowerNV platform in order to remove home made resource allocations and instead use the generic code (which is possible after some small improvements to it done by Gavin). - Uprobes support by Ananth N Mavinakayanahalli - A pile of embedded updates from Freescale folks, including new SoC and board supports, more KVM stuff including preparing for 64-bit BookE KVM support, ePAPR 1.1 updates, etc..." Fixup trivial conflicts in drivers/scsi/ipr.c * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits) powerpc/iommu: Fix multiple issues with IOMMU pools code powerpc: Fix VMX fix for memcpy case driver/mtd:IFC NAND:Initialise internal SRAM before any write powerpc/fsl-pci: use 'Header Type' to identify PCIE mode powerpc/eeh: Don't release eeh_mutex in eeh_phb_pe_get powerpc: Remove tlb batching hack for nighthawk powerpc: Set paca->data_offset = 0 for boot cpu powerpc/perf: Sample only if SIAR-Valid bit is set in P7+ powerpc/fsl-pci: fix warning when CONFIG_SWIOTLB is disabled powerpc/mpc85xx: Update interrupt handling for IFC controller powerpc/85xx: Enable USB support in p1023rds_defconfig powerpc/smp: Do not disable IPI interrupts during suspend powerpc/eeh: Fix crash on converting OF node to edev powerpc/eeh: Lock module while handling EEH event powerpc/kprobe: Don't emulate store when kprobe stwu r1 powerpc/kprobe: Complete kprobe and migrate exception frame powerpc/kprobe: Introduce a new thread flag powerpc: Remove unused __get_user64() and __put_user64() powerpc/eeh: Global mutex to protect PE tree powerpc/eeh: Remove EEH PE for normal PCI hotplug ...	2012-10-06 03:16:12 +09:00
Linus Torvalds	11126c611e	Merge branch 'akpm' (Andrew's patch-bomb) ... Merge misc patches from Andrew Morton: "The MM tree is rather stuck while I wait to find out what the heck is happening with sched/numa. Probably I'll need to route around all the code which was added to -next, sigh. So this is "everything else", or at least most of it - other small bits are still awaiting resolutions of various kinds." * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (180 commits) lib/decompress.c add __init to decompress_method and data kernel/resource.c: fix stack overflow in __reserve_region_with_split() omfs: convert to use beXX_add_cpu() taskstats: cgroupstats_user_cmd() may leak on error aoe: update aoe-internal version number to 50 aoe: update documentation to better reflect aoe-plus-udev usage aoe: remove unused code aoe: make dynamic block minor numbers the default aoe: update and specify AoE address guards and error messages aoe: retain static block device numbers for backwards compatibility aoe: support more AoE addresses with dynamic block device minor numbers aoe: update documentation with new URL and VM settings reference aoe: update copyright year in touched files aoe: update internal version number to 49 aoe: remove unused code and add cosmetic improvements aoe: increase net_device reference count while using it aoe: associate frames with the AoE storage target aoe: disallow unsupported AoE minor addresses aoe: do revalidation steps in order aoe: failover remote interface based on aoe_deadsecs parameter ...	2012-10-06 03:09:16 +09:00
Shawn Guo	179a502f8c	rtc: snvs: add Freescale rtc-snvs driver ... Add an RTC driver for Freescale Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2012-10-06 03:05:01 +09:00
Ralf Baechle	382fc33b4a	Merge branch 'master' of git://dev.phrozen.org/mips-next into mips-for-linux-next	2012-10-05 15:56:28 +02:00
Linus Torvalds	578f1ef91a	MFD bits for the 3.7 merge window. ... As usual we have a few new drivers: - TI LP8788 - TI OMAP USB TLL - Maxim MAX8907 - SMSC ECE1099 - Dialog Semiconductor DA9055 - A simpler syscon driver that allow us to get rid of the anatop one. Drivers are also gradually getting Device Tree and IRQ domain support. The following drivers got DT support: - palmas, 88pm860x, tc3589x and twl4030-audio And those ones now use the IRQ domain APIs: - 88pm860x, tc3589x, db8500_prcmu Also some other interesting changes: - Intel's ICH LPC now supports Lynx Point - TI's twl4030-audio added a GPO child - tps6527 enabled its backlight subdevice - The twl6030 pwm driver moved to the new PWM subsystem And finally a bunch of cleanup and casual fixes for mc13xxx, 88pm860x, palmas, ab8500, wm8994, wm5110, max8907 and the tps65xxx family. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAABAgAGBQJQbVq4AAoJEIqAPN1PVmxKXOsP/ifwoqYkaGUsZ7M8b8iTTxlk a0/SBU1O+FDG7LbIsOyJ6VZCpipj8R4WyVqNdS2CSPVoSdT8KnakrxFY9FAtcmpA c6O7r+9dymcT7HeQ6mBQYYeEyXcZQkTXj9Y298zuRT88gccH5PQIOX8DTj6gKVxN xhuDuAWtizvwAJWfof/57p7JLilCF96Hq0UdeISD10UWJPxPmXFJTzzYw6GbPPOl zk1N6yig3VpK6sfK+QdqZykHFKj23RX57SmceHOISTpEr66ayuKIkJEqWm/IydMO XWDTT2IN80ca+1PnbrQOyiMtXg3EKrZN5WDEp2AcUiKP0fnAoZBTeuZUkqyLc3rJ W8LowQe6x5154CeLwcJc4+kmeGUhbj09GHKCsI7x/lQpMWgJCaGHGvLxAUE1uRZi 4Bn9IUP7OqE465fNolLOd1fRxgzWJxe5rBYKQB7UcOrS0NThPhu0r0qV905zBrBO tyCZz+PexTiirpbv1K0dMTcpWeHVOmtYG5uJTmw9wTRv7jW7aUhkhkW5Q+E5BAdb 9Rj5/vYertqI3VzRQ1w2z1SavzBO3OykTURWGDkwjfFWYbJtEdPYGGjRSFiphVYG 8jvs5UzrDm2ICqkpkKzovVWi9lXyvNVVCgSwxHQeoPXfqb5dXLlbUZZBaCaQpRII XlItAJvIiUNIA8bXLoC8 =n6lp -----END PGP SIGNATURE----- Merge tag 'mfd-3.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD changes from Samuel Ortiz: "MFD bits for the 3.7 merge window. As usual we have a few new drivers: - TI LP8788 - TI OMAP USB TLL - Maxim MAX8907 - SMSC ECE1099 - Dialog Semiconductor DA9055 - A simpler syscon driver that allow us to get rid of the anatop one. Drivers are also gradually getting Device Tree and IRQ domain support. The following drivers got DT support: - palmas, 88pm860x, tc3589x and twl4030-audio And those ones now use the IRQ domain APIs: - 88pm860x, tc3589x, db8500_prcmu Also some other interesting changes: - Intel's ICH LPC now supports Lynx Point - TI's twl4030-audio added a GPO child - tps6527 enabled its backlight subdevice - The twl6030 pwm driver moved to the new PWM subsystem And finally a bunch of cleanup and casual fixes for mc13xxx, 88pm860x, palmas, ab8500, wm8994, wm5110, max8907 and the tps65xxx family." Fix up various annoying conflicts: the DT and IRQ domain support came in twice and was already in 3.6. And then it was apparently rebased. Guys, DON'T REBASE! * tag 'mfd-3.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (89 commits) ARM: dts: Enable 88pm860x pmic mfd: 88pm860x: Move gpadc init into touch mfd: 88pm860x: Device tree support mfd: 88pm860x: Use irqdomain mfd: smsc: Add support for smsc gpio io/keypad driver backlight: tps65217_bl: Add missing platform_set_drvdata in tps65217_bl_probe mfd: DA9055 core driver mfd: tps65910: Add alarm interrupt of TPS65910 RTC to mfd device list mfd: wm5110: Add register patches for revision B mfd: wm5110: Disable control interface error report for WM5110 rev B mfd: max8907: Remove regulator-compatible from DT docs backlight: Add TPS65217 WLED driver mfd: Add backlight as subdevice to the tps65217 mfd: Provide the PRCMU with its own IRQ domain mfd: Fix max8907 sparse warning mfd: Add lp8788 mfd driver mfd: dbx500: Provide a more accurate smp_twd clock mfd: rc5t583: Fix warning messages regulator: palmas: Add DT support mfd: palmas: Change regulator defns to better suite DT ...	2012-10-05 12:01:30 +09:00
Linus Torvalds	a54dfb1a84	Devicetree updates for 3.7 ... - Import of latest upstream device tree compiler (dtc) - New function of_get_child_by_name - Support for #size-cells of 0 and #addr-cells of >2 - Couple of DT binding documentation updates -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEcBAABAgAGBQJQbF9eAAoJEMhvYp4jgsXiMVAH/3AsqH/ksWFO48L2342WhPzv JLP2YJQ+X2E3fi4sIXWDOAHXgSsKcKYiUqRJNpebdAzfK+/HCdtV594GXP9MfUdq 05ByUBa728wNPHiQitbtwLu+MN0ot1icXeHB+Gx8LuVrJnW/iJv/FHa6QU+cc9ct jxnDu8Lfp4ja4rFWq56c5vda6ecP5nVIyAPZ40z9Q6QioL0BxJ4axQ8mW6lxG0SH BxOzCppxxShU3O52typ29UORfTDfFPFmskLuJPxGThI4HWaIfpBc55wKKw8P2SR0 2/uK+TJw/UTsDwB/IIzbane4AIScj7ZdRjN1T132DcX9e/aDaZhDMNoG3TSE6kQ= =CZiW -----END PGP SIGNATURE----- Merge tag 'dt-for-3.7' of git://sources.calxeda.com/kernel/linux Pull devicetree updates from Rob Herring: - Import of latest upstream device tree compiler (dtc) - New function of_get_child_by_name - Support for #size-cells of 0 and #addr-cells of >2 - Couple of DT binding documentation updates Fix up trivial conflicts due to of_get_child_by_name() having been added next to the new of_get_next_available_child(). * tag 'dt-for-3.7' of git://sources.calxeda.com/kernel/linux: MAINTAINERS: add scripts/dtc under Devicetree maintainers dtc: import latest upstream dtc dt: Document general interrupt controller bindings dt/s3c64xx/spi: Use of_get_child_by_name to get a named child dt: introduce of_get_child_by_name to get child node by name of: i2c: add support for wakeup-source property of/address: Handle #address-cells > 2 specially DT: export of_irq_to_resource_table() devicetree: serial: Add documentation for imx serial devicetree: pwm: mxs-pwm.txt: Fix reg field annotation of: Allow busses with #size-cells=0	2012-10-03 09:44:08 -07:00
Thomas Abraham	cd1b00eb24	mmc: sdhci-s3c: Add device tree support ... Add device tree based discovery support for Samsung's sdhci controller. Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>	2012-10-03 10:05:20 -04:00
Thomas Abraham	c3665006ec	mmc: dw_mmc: add support for exynos specific implementation of dw-mshc ... Samsung Exynos SoC's extend the dw-mshc controller for additional clock and bus control. Add support for these extensions and include provide device tree based discovery suppory as well. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>	2012-10-03 10:05:20 -04:00
Thomas Abraham	c91eab4b25	mmc: dw_mmc: add device tree support ... Add device tree based discovery support. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>	2012-10-03 10:05:17 -04:00
Linus Torvalds	ca41cc96b2	Merge branch 'for-v3.7' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping ... Pull CMA and DMA-mapping updates from Marek Szyprowski: "This time the pull request is rather small, because the further redesign patches were not ready on time. This pull request consists of the patches which extend ARM DMA-mapping subsystem with support for CPU coherent (ACP) DMA busses. The first client of the new version is HighBank SATA driver. The second part of the pull request includes various cleanup for both CMA common code and ARM DMA-mapping subsystem." Fix up trivial add-add conflict due to the "dma-coherent" DT property being added next to the "calxeda,port-phys" property for the Calxeda AHCI controller. * 'for-v3.7' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: dma-mapping: Remove unsed var at arm_coherent_iommu_unmap_page ARM: highbank: add coherent DMA setup ARM: kill off arch_is_coherent ARM: add coherent iommu dma ops ARM: add coherent dma ops ARM: dma-mapping: Refrain noisy console message ARM: dma-mapping: Small logical clean up drivers: dma-contiguous: refactor dma_alloc_from_contiguous()	2012-10-02 19:13:12 -07:00
Linus Torvalds	16642a2e7b	Power management updates for 3.7-rc1 ... * Improved system suspend/resume and runtime PM handling for the SH TMU, CMT and MTU2 clock event devices (also used by ARM/shmobile). * Generic PM domains framework extensions related to cpuidle support and domain objects lookup using names. * ARM/shmobile power management updates including improved support for the SH7372's A4S power domain containing the CPU core. * cpufreq changes related to AMD CPUs support from Matthew Garrett, Andre Przywara and Borislav Petkov. * cpu0 cpufreq driver from Shawn Guo. * cpufreq governor fixes related to the relaxing of limit from Michal Pecio. * OMAP cpufreq updates from Axel Lin and Richard Zhao. * cpuidle ladder governor fixes related to the disabling of states from Carsten Emde and me. * Runtime PM core updates related to the interactions with the system suspend core from Alan Stern and Kevin Hilman. * Wakeup sources modification allowing more helper functions to be called from interrupt context from John Stultz and additional diagnostic code from Todd Poynor. * System suspend error code path fix from Feng Hong. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.18 (GNU/Linux) iQIcBAABAgAGBQJQa1rRAAoJEKhOf7ml8uNsYZ0P/2RZ71sgLWcUCfr0yHaiZeOd 2GxEYSZ+9BZJHADgoAK/bHRTv8crm40Y2RkbaWbxPDRNuE4SutbvNTGTlJSAguSD yHkU/6AFC7u8Jwq+afsWIdGX7eHd78zPpj6EVtVtjHM903WDwbMU2vUz7tQ+fFa+ ZZ7eydq9j0ec0OoH3UeNhet7JSOpT5BSLgjmIkHMBgIvTxNVDbkB31QUxnUxocxn k6S2wQaUSJJWGMLksRRNrhwLq+cGYwTsaOtG/KzRLH1raUyn33B5pcZr0aqhOkjg ClaCks3V8o3vRghSwOPB5aVXzjBKvM3UnSyJNIl+FeCeyWuwSNbkEFdA/e7oPuxG UsW6dcHiuVo6Ir4+zhd9+lN+/AcPTChO5b7lbU8qRF4ce04czWlUY/KzJjaM+YOE CKGq6eX9AHwFjE+h4+VcCXgmzcioiS8Y/CPz13u8N1y0zzwW+ftjb12K+7lVBEG1 fhrePKHgLw3kJ9LqGpR+4vVur7C+rCf6WwCReTY2vXXVYJ+SuKWTRI4zAjTPXtHa i9dpMRASpF+ScRYBcgwIpv789WuHATFKqdBSinZUKBaxQZ5flJ2qIrfqN5VeAejh oQs/zZCdIuAtFKqVycQ0L42YxFNKgPFKQErUCSu3M5OuZLlLVLu7yQvIo2Xmo9qf Hcrpvo5K+w29YkiwGP9e =rbCk -----END PGP SIGNATURE----- Merge tag 'pm-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael J Wysocki: - Improved system suspend/resume and runtime PM handling for the SH TMU, CMT and MTU2 clock event devices (also used by ARM/shmobile). - Generic PM domains framework extensions related to cpuidle support and domain objects lookup using names. - ARM/shmobile power management updates including improved support for the SH7372's A4S power domain containing the CPU core. - cpufreq changes related to AMD CPUs support from Matthew Garrett, Andre Przywara and Borislav Petkov. - cpu0 cpufreq driver from Shawn Guo. - cpufreq governor fixes related to the relaxing of limit from Michal Pecio. - OMAP cpufreq updates from Axel Lin and Richard Zhao. - cpuidle ladder governor fixes related to the disabling of states from Carsten Emde and me. - Runtime PM core updates related to the interactions with the system suspend core from Alan Stern and Kevin Hilman. - Wakeup sources modification allowing more helper functions to be called from interrupt context from John Stultz and additional diagnostic code from Todd Poynor. - System suspend error code path fix from Feng Hong. Fixed up conflicts in cpufreq/powernow-k8 that stemmed from the workqueue fixes conflicting fairly badly with the removal of support for hardware P-state chips. The changes were independent but somewhat intertwined. * tag 'pm-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits) Revert "PM QoS: Use spinlock in the per-device PM QoS constraints code" PM / Runtime: let rpm_resume() succeed if RPM_ACTIVE, even when disabled, v2 cpuidle: rename function name "__cpuidle_register_driver", v2 cpufreq: OMAP: Check IS_ERR() instead of NULL for omap_device_get_by_hwmod_name cpuidle: remove some empty lines PM: Prevent runtime suspend during system resume PM QoS: Use spinlock in the per-device PM QoS constraints code PM / Sleep: use resume event when call dpm_resume_early cpuidle / ACPI : move cpuidle_device field out of the acpi_processor_power structure ACPI / processor: remove pointless variable initialization ACPI / processor: remove unused function parameter cpufreq: OMAP: remove loops_per_jiffy recalculate for smp sections: fix section conflicts in drivers/cpufreq cpufreq: conservative: update frequency when limits are relaxed cpufreq / ondemand: update frequency when limits are relaxed properly __init-annotate pm_sysrq_init() cpufreq: Add a generic cpufreq-cpu0 driver PM / OPP: Initialize OPP table from device tree ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp cpufreq: Remove support for hardware P-state chips from powernow-k8 ...	2012-10-02 18:32:35 -07:00
Linus Torvalds	51562cba98	Minor libata updates, nothing notable. ... 1) Apply -- and then revert -- the FUA feature. Caused disk corruption in linux-next, proving it cannot be turned on by default. Net effect to upstream tree: zero 2) New AHCI platform driver sata_highbank 3) Improve SCSI MODE SENSE handling; support MODE SELECT 4) AHCI: support aggressive device sleep (power mgmt) 5) sata_fsl: minor fix 6) pata_arasan: clk support -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIVAwUAUGtCHCWzCDIBeCsvAQLHFA//X6IM8ymHasCzEXvB2IusarPZYqfrGOUX DVHPPeBdNbuNtX1iIp9NEvx5PONEvBgylrzbH0jOW9f+8GZM7sgT0NFlUWAfg7hO HF3RN3EsQMMcSK+BoOLzo+vzSEAIbPB7zqKAGqh9QBBpfKAYbAy2WHr7P5OMuy9J IjKoknc8jaOWavg8oavx3dU5PCFU7BoPQzrPSNB/MY5L1Ia3H29zyCmoW1Ha05wa LRZzJes4X3H+tStNhtrNmItaRfxJNW7xPluNOn4FIyQmK+Nh3NDk6IBuwPdFpltn m6azzOfHreaP9J9xcIiU1NX7Gu+IBYZpOyL61B+WUmCRLXMdnhDTZE6mkKe10ReZ o9oBn636swDVMXG+zS0hjv+nQgV0l+sHX/0GsTCxDapZal7icCUsLzW9flaCh0n+ zkwoxjvGZOkFf6ZsAgFVo8h2YMe7Ph2I5JIiN12rqee4grV7cHStKQn076Kyb9zo 5LsR1/+YuuWz9G2dEmirDA8xBtydIZ4thvblwXipnqyZWkAwLue+opIWxau7BlPZ qz6KjNp2L1hS8QgQnYHYmk/EDPDg5SNP4RTCCO9TKUBcu9fcke2c+R8V7ebKCI02 AaaccV4N6t7c1rdQUH6bnizi9aZ+tRoBAheLEDrrkOx72f71hE6JgueqhI+EaTw6 LyrSiiVITxA= =i3EH -----END PGP SIGNATURE----- Merge tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev Pull libata changes from Jeff Garzik: "Minor libata updates, nothing notable. 1) Apply -- and then revert -- the FUA feature. Caused disk corruption in linux-next, proving it cannot be turned on by default. Net effect to upstream tree: zero 2) New AHCI platform driver sata_highbank 3) Improve SCSI MODE SENSE handling; support MODE SELECT 4) AHCI: support aggressive device sleep (power mgmt) 5) sata_fsl: minor fix 6) pata_arasan: clk support" * tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_mv: Fix warnings when no PCI [libata] Makefile: Fix build error in sata_highbank [libata] export ata_dev_set_feature() libata-core: use ATA_LBA in ata_build_rw_tf() ata/ahci_platform: Add clock framework support pata_arasan: add Device Tree probing capability pata_arasan: Add clk_{un}prepare() support ata: add platform driver for Calxeda AHCI controller sata_fsl: add workaround for data length mismatch on freescale V2 controller ahci: implement aggressive SATA device sleep support ata: define enum constants for IDENTIFY DEVICE Revert "libata: enable SATA disk fua detection on default" [libata] scsi: implement MODE SELECT command [libata] scsi: support MODE SENSE request for changeable and default parameters [libata] scsi: Remove unlikely() from FUA check libata: enable SATA disk fua detection on default	2012-10-02 18:23:35 -07:00
Linus Torvalds	7fe0b14b72	spi: Updates for v3.7 ... No framework work here, only a bunch of driver updates of varying sizes: - Factoring out of the core hardware support from the MXS MMC driver by Marek Vasut to allow the hardware to also be used for SPI. - Lots of error handling cleanups from Guenter Roeck - Removal of the existing Tegra driver which is quite comprehensively broken as detailed in the changelog for the removal. - DT suppport for the PL022 and GPIO drivers. - pinctrl support for OMAP and PL022. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAABAgAGBQJQarn8AAoJEOoSHmUN5Tg49U4QAKeAPTxlKBSwHuJUpvKsCFF7 rfN9wsViOigcItsk065C1g20wViw6t8pSFkNmRzmbsIdSofqCYZlJapgWM5j2cXp BXs8z7za0JmK62ftS6C3IydacJPRDY/zd0fnSqXnhQOG7Z3YxDYJrM3Ugc97ZE6+ dg9NUn6rw9ZSwHEwpl08H8tLYqNkd8A+wayPYKr0GSWX7EAqS8cJEWjS0DtvDAm1 LxMx4BQHCorR6ydUZJrfhG6fLsubhIuMnXI4Ajhv/Ictl1qHH1Zx3mIAB+BNVV/B RlaQxPycr0eSikZ9UPMNST2o8vCRvamSfguPfBHMzRdRBp8M3TOKkNM2PmEGzCJW pgpDsMNAkEfktGqQfMTBJJMbAPLux1W5mPjfcjt7vOS+q6lkFPtecGdKbynnmLX6 Vf6nImwp1vyNIvcCip0YZId+j/LrQimuDfMQOH99mwxbkNqMMA401bsxEt8ELmut Qt1XEFoS6Xxj8n2BhTS/lMgEzz8zOuH9uOJI0hpNtctOfue6vqPm76GaefVC1i/B jpMpUwexwsFc6IhekVFG0MAkolMhFmhlTwk9N24yfgArH8D1pa3emBFN762BQUHE Ba7pghcwZADm8rT5SFNoxblcyekT/hCSRSiQ55MHUpqdH77/eVA1Lah4PaHiOqxz b0mu9Ae98K077vGP3Z6r =ld23 -----END PGP SIGNATURE----- Merge tag 'spi-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc Pull spi updates from Mark Brown: "No framework work here, only a bunch of driver updates of varying sizes: - Factoring out of the core hardware support from the MXS MMC driver by Marek Vasut to allow the hardware to also be used for SPI. - Lots of error handling cleanups from Guenter Roeck - Removal of the existing Tegra driver which is quite comprehensively broken as detailed in the changelog for the removal. - DT suppport for the PL022 and GPIO drivers. - pinctrl support for OMAP and PL022." Pulling from Mark Brown as Grant Likely is still busy moving. * tag 'spi-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: (53 commits) spi: remove completely broken Tegra driver spi/imx: set the inactive state of the clock according to the clock polarity spi/pl022: get/put resources on suspend/resume spi/pl022: use more managed resources spi/pl022: Devicetree support w/o platform data spi/s3c64xx: Don't free controller_data on non-dt platforms spi: omap2-mcspi: add pinctrl support spi/pl022: adopt pinctrl support spi: omap2-mcspi: Cleanup the omap2_mcspi_txrx_dma function spi/gpio: Fix stub for spi_gpio_probe_dt() spi/mxs: Make the SPI block clock speed configurable via DT spi: spi-sh-hspi: drop frees of devm_ alloc'd data spi/pl022: Fix chipselects pointer computation spi: spi-tle62x0: Use module_spi_driver macro mxs/spi: Rework the mxs_ssp_timeout to be more readable mxs/spi: Decrement the DMA/PIO border mxs/spi: Increment the transfer length only if transfer succeeded mxs/spi: Fix issues when doing long continuous transfer spi: spi-gpio: Add DT bindings spi: spi-gpio: store chipselect information in private structure ...	2012-10-02 17:26:42 -07:00
Linus Torvalds	fc47912d9c	Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input ... Pull input updates from Dmitry Torokhov: "A few drivers were updated with device tree bindings and others got a few small cleanups and fixes." Fix trivial conflict in drivers/input/keyboard/omap-keypad.c due to changes clashing with a whitespace cleanup. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (28 commits) Input: wacom - mark Intuos5 pad as in-prox when touching buttons Input: synaptics - adjust threshold for treating position values as negative Input: hgpk - use %*ph to dump small buffer Input: gpio_keys_polled - fix dt pdata->nbuttons Input: Add KD[GS]KBDIACRUC ioctls to the compatible list Input: omap-keypad - fixed formatting Input: tegra - move platform data header Input: wacom - add support for EMR on Cintiq 24HD touch Input: s3c2410_ts - make s3c_ts_pmops const Input: samsung-keypad - use of_get_child_count() helper Input: samsung-keypad - use of_match_ptr() Input: uinput - fix formatting Input: uinput - specify exact bit sizes on userspace APIs Input: uinput - mark failed submission requests as free Input: uinput - fix race that can block nonblocking read Input: uinput - return -EINVAL when read buffer size is too small Input: uinput - take event lock when fetching events from buffer Input: get rid of MATCH_BIT() macro Input: rotary-encoder - add DT bindings Input: rotary-encoder - constify platform data pointers ...	2012-10-02 17:16:10 -07:00
Linus Torvalds	06fe918e9f	These are the bulk pinctrl changes for kernel v3.7: ... - Add subdrivers for the DB8540 and NHK8815 Nomadik-type ASICs, provide platform config for the Nomadik. - Add a driver for the i.MX35. - Add a driver for the BCM2835, an advanced GPIO expander. - Various fixes and clean-ups and minor improvements for the core, Nomadik, pinctr-single, sirf drivers. - Some platform config for the ux500. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) iQIcBAABAgAGBQJQatYeAAoJEEEQszewGV1zv78QAIjWWnQgZlMrX+ol6r5w44bx nnTLY22VE6GMliR9SagCo1VydjdZdsmLf03yLBP4Lmcc/PV4DmvJmX5l3cXxdCQe CmFCMbSOTxpIM0mgrhqDjSl8mJkJEXd2RvgvQaeffqShzK7qSU7LZbbZDX/YnY6O eb0UqgkQNXyutahq7qRKyVT3repb4EweA8wa45ix5Nx3Cco2PD7Pp5PV/LVlMHIf hDL3+2RmGrKDa52r5aOfg6ZvOabGU7TVmT21V7VzbtPvwP4yGHrwt3SrgGRFfwTk U8SwdT/DRVl44per8cxcdvxpde693xxxgWWVf01Exc5bOKfaaDjAh6fOdqbL0nkI kQQrQt5F+tT8ODtwoaObu7w1SSHiquV6/dNHAz03S6TwsNs7fPfk9IiQpwHuFFUL RSDZ3Z3dTmcU5PqhpRaPQwsPYWM7n9lF2uPZsH+uO+H1M0ag9w3Xz3up1nwRBzCC jr+W5s3vmmDot9JSfbZGCAGelb2AdX3FL1iRF95QjbAAdJdzS/szmA4x01R/xJax W8gfkgOr8mOiAdxqyS9LQu8cr1fn+e/6d2up0kBl0W7SPipeuUSd4SzJuSj9Zj9V BA6RxYQxPFRuwwU6YfKui3jBaKgvcD1lWTF8lJHljn5NqB3IbUjWe3px9ZmLq6wA nQLDXvuP36SbGTdkha0D =g2i2 -----END PGP SIGNATURE----- Merge tag 'pinctrl-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl changes from Linus Walleij: "Some of this stuff is hitting arch/arm/* and have been ACKed by the ARM SoC folks, or it's device tree bindings pertaining to the specific driver. These are the bulk pinctrl changes for kernel v3.7: - Add subdrivers for the DB8540 and NHK8815 Nomadik-type ASICs, provide platform config for the Nomadik. - Add a driver for the i.MX35. - Add a driver for the BCM2835, an advanced GPIO expander. - Various fixes and clean-ups and minor improvements for the core, Nomadik, pinctr-single, sirf drivers. - Some platform config for the ux500." * tag 'pinctrl-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (27 commits) pinctrl: add bcm2835 driver pinctrl: clarify idle vs sleep states pinctrl/nomadik: use irq_find_mapping() pinctrl: sirf: add lost chained_irq_enter and exit in sirfsoc_gpio_handle_irq pinctrl: sirf: initialize the irq_chip pointer of pinctrl_gpio_range pinctrl: sirf: fix spinlock deadlock in sirfsoc_gpio_set_input pinctrl: sirf: add missing pins to pinctrl list pinctrl: sirf: fix a typo in sirfsoc_gpio_probe pinctrl: pinctrl-single: add debugfs pin h/w state info ARM: ux500: 8500: update I2C sleep states pinctrl pinctrl: Fix potential memory leak in pinctrl_register_one_pin() ARM: ux500: tidy up pin sleep modes ARM: ux500: fix spi2 pin group pinctrl: imx: remove duplicated const pinctrl: document semantics vs GPIO ARM: ux500: 8500: use hsit_a_2 group for HSI pinctrl: use kasprintf() in pinmux_request_gpio() pinctrl: pinctrl-single: Add pinctrl-single,bits type of mux pinctrl/nomadik : add MC1_a_2 pin MC1 function group list pinctrl: pinctrl-single: Make sure we do not change bits outside of mask ...	2012-10-02 16:20:20 -07:00
Linus Torvalds	dff8360a4a	So this is the LW GPIO patch stack for v3.7: ... - refactoring from Thierry Redding at Arnd Bergmann's request to use the seq_file iterator interface in gpiolib. - A new driver for Avionic Design's N-bit GPIO expander. - Two instances of mutexes replaced by spinlocks from Axel Lin to code that is supposed to be fastpath compliant. - IRQ demuxer and gpio_to_irq() support for pcf857x by Kuninori Morimoto. - Dynamic GPIO numbers, device tree support, daisy chaining and some other fixes for the 74x164 driver by Maxime Ripard. - IRQ domain and device tree support for the tc3589x driver by Lee Jones. - Some conversion to use managed resources devm_* code. - Some instances of clk_prepare() or clk_prepare_enable() added to support the new, stricter common clock framework. - Some for_each_set_bit() simplifications. - Then a lot of fixes as we fixed up all of the above tripping over our own shoelaces and that kind of thing. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAABAgAGBQJQafMcAAoJEEEQszewGV1znvsP/2CZusf05+XiCHZO7LGsBo+h WrVNB/XxrpgW7EEqpTPJCh2leM/hXs1uOYoQq0v8ICEJLwdIox8jYsnPL7NUWpN4 mcM9YCqH65Ljt07Ec25bTRzkIy881nYfvK7nUo7DZH8sq2eX53Vxqkr/IS3ZKQVj T1Kd7GHmfje2FrnL5O0owT3zNHE9VmHm1Ct9DRCRP/U2i8CSAFERJgBsoslrut13 Cnvkvwbj9Q2LQy+kIBt3PIlKb37u1Uucqa8uExvMV9cSAzG7X9h++wSgm2RioSsR mYrCRn19qzz7EATh4yUKHe56mx0KNl+/0vapqBuziTy+r0oi40VEoiSzKyfSnhFy MYgiVVnWIH9dhOTP/0QSbrYsPEeT/ZlcJKp6uu1o1MR6z3f3058Sc6FTCzeGcW88 Ayh0kT0e8iLsQ+tRmjFEEEALLKSL9Q7StH2az7Awkve3L9JCVUVXaJwynjcSIC29 8sbAV+ENTYaKOGV8uMRH+s/WpKN6w9G2gZ/qhlXem9r4/Rd529wGBlH1or8A7uLf cNuaSquN3TM5O1i26K3+rEKp5Sd7+RIMpQCMsuiEpQd1UnbB2Z1X4xjjLYwKqHFj fVQtu7s7tQ/o/hYzTn9hP4Cqj4SDB+EaDmAqq0yJH2DNsUtvLLug62ekatvvejc/ 6HFuiVOYkigSRbl7sDoV =jbUM -----END PGP SIGNATURE----- Merge tag 'gpio-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO changes from Linus Walleij: "So this is the LW GPIO patch stack for v3.7: - refactoring from Thierry Redding at Arnd Bergmann's request to use the seq_file iterator interface in gpiolib. - A new driver for Avionic Design's N-bit GPIO expander. - Two instances of mutexes replaced by spinlocks from Axel Lin to code that is supposed to be fastpath compliant. - IRQ demuxer and gpio_to_irq() support for pcf857x by Kuninori Morimoto. - Dynamic GPIO numbers, device tree support, daisy chaining and some other fixes for the 74x164 driver by Maxime Ripard. - IRQ domain and device tree support for the tc3589x driver by Lee Jones. - Some conversion to use managed resources devm_* code. - Some instances of clk_prepare() or clk_prepare_enable() added to support the new, stricter common clock framework. - Some for_each_set_bit() simplifications. - Then a lot of fixes as we fixed up all of the above tripping over our own shoelaces and that kind of thing." * tag 'gpio-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (34 commits) gpio: pcf857x: select IRQ_DOMAIN gpio: Document device_node's det_debounce gpio-lpc32xx: Add GPI_28 gpio: adnp: dt: Reference generic interrupt binding gpio: Add Avionic Design N-bit GPIO expander support gpio: pxa: using for_each_set_bit to simplify the code gpio_msm: using for_each_set_bit to simplify the code gpio: Enable the tc3298x GPIO expander driver for Device Tree gpio: Provide the tc3589x GPIO expander driver with an IRQ domain ARM: shmobile: kzm9g: use gpio-keys instead of gpio-keys-polled gpio: pcf857x: fixup smatch WARNING gpio: 74x164: Add support for the daisy-chaining gpio: 74x164: dts: Add documentation for the dt binding dt: Fix incorrect reference in gpio-led documentation gpio: 74x164: Add device tree support gpio: 74x164: Use dynamic gpio number assignment if no pdata is present gpio: 74x164: Use devm_kzalloc gpio: 74x164: Use module_spi_driver boiler plate function gpio: sx150x: Use irq_data_get_irq_chip_data() at appropriate places gpio: em: Use irq_data_get_irq_chip_data() at appropriate places ...	2012-10-02 16:05:10 -07:00
Linus Torvalds	aecdc33e11	Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next ... Pull networking changes from David Miller: 1) GRE now works over ipv6, from Dmitry Kozlov. 2) Make SCTP more network namespace aware, from Eric Biederman. 3) TEAM driver now works with non-ethernet devices, from Jiri Pirko. 4) Make openvswitch network namespace aware, from Pravin B Shelar. 5) IPV6 NAT implementation, from Patrick McHardy. 6) Server side support for TCP Fast Open, from Jerry Chu and others. 7) Packet BPF filter supports MOD and XOR, from Eric Dumazet and Daniel Borkmann. 8) Increate the loopback default MTU to 64K, from Eric Dumazet. 9) Use a per-task rather than per-socket page fragment allocator for outgoing networking traffic. This benefits processes that have very many mostly idle sockets, which is quite common. From Eric Dumazet. 10) Use up to 32K for page fragment allocations, with fallbacks to smaller sizes when higher order page allocations fail. Benefits are a) less segments for driver to process b) less calls to page allocator c) less waste of space. From Eric Dumazet. 11) Allow GRO to be used on GRE tunnels, from Eric Dumazet. 12) VXLAN device driver, one way to handle VLAN issues such as the limitation of 4096 VLAN IDs yet still have some level of isolation. From Stephen Hemminger. 13) As usual there is a large boatload of driver changes, with the scale perhaps tilted towards the wireless side this time around. Fix up various fairly trivial conflicts, mostly caused by the user namespace changes. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1012 commits) hyperv: Add buffer for extended info after the RNDIS response message. hyperv: Report actual status in receive completion packet hyperv: Remove extra allocated space for recv_pkt_list elements hyperv: Fix page buffer handling in rndis_filter_send_request() hyperv: Fix the missing return value in rndis_filter_set_packet_filter() hyperv: Fix the max_xfer_size in RNDIS initialization vxlan: put UDP socket in correct namespace vxlan: Depend on CONFIG_INET sfc: Fix the reported priorities of different filter types sfc: Remove EFX_FILTER_FLAG_RX_OVERRIDE_IP sfc: Fix loopback self-test with separate_tx_channels=1 sfc: Fix MCDI structure field lookup sfc: Add parentheses around use of bitfield macro arguments sfc: Fix null function pointer in efx_sriov_channel_type vxlan: virtual extensible lan igmp: export symbol ip_mc_leave_group netlink: add attributes to fdb interface tg3: unconditionally select HWMON support when tg3 is enabled. Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT" gre: fix sparse warning ...	2012-10-02 13:38:27 -07:00
Haojian Zhuang	2e57d56747	mfd: 88pm860x: Device tree support ... Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>	2012-10-02 11:43:13 +02:00
Rob Herring	1dc737c44a	ARM: highbank: add coherent DMA setup ... Some highbank DMA masters can support coherent (ACP) or non-coherent DMA. This sets up dma_map_ops for masters which are configured for coherent DMA. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>	2012-10-02 08:58:07 +02:00
Linus Torvalds	8f446a7a06	ARM: soc: driver specific changes ... - A long-coming conversion of various platforms to a common LED infrastructure - AT91 is moved over to use the newer MCI driver for MMC - Pincontrol conversions for samsung platforms - DT bindings for gscaler on samsung - i2c driver fixes for tegra, acked by i2c maintainer -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJQaO48AAoJEIwa5zzehBx3excP/ieEkRhvfnWxdYST6ekvGIQr nEyskOh2rVjgYKmSXUJyKSbvG+7bZ8VIxvPvojeAJ/R84pTFMzbR2F0CaPKzAuSW inDt6c0Bnx1NZlfUTAoXcz7feyq9zHYNs9BCLoPU0bYNchCCqcWSKzqnpXk2ph/P LFnmNa0j6a4E3QJYAjM2zFvc3Tgk+MWTq1fWwNFvsWTh2WbQtmB/iGnzT5Xs4XQh u1SSx5tz0lcF5zQRGmJhXgL5+nnIP4sRwRUBAkpe3Gv5cM6WBVEBRDANa5QpbUL2 RXK5YyCTIln2Me4bPk32zEBLjiZ/WXbmiA2uwoqVgy6XToubemDXd0PtKmjj5tZ1 BkTD1DND7BKBEQnJj/GBECEdvx2FbrKfruoPcJHvXPZ7Svn5Dt/MWYJQIkRFkuhL zlVNoDGWlU8nScGrgmTM56UvWmGWC3UFsWSgdVQNfW9yEva+G1FvRUwUH02Ip5Ad 4r28JFIn6zyjtM99ZHipU6C6Rze2ordC7fl5X5LBLkVOobioblxCAhIhcqkhfKsk rFriNsdfYs7SrJA7mK7GzvaMEJgp/5o1noJKXI7ZBcLI8yYagzbQbPu/vGi6G6d3 0xC7NaTEJbtoXoDAtmtilLRxmw0YCXgVBBGua0K2YKpcRwnzCHNbV4gsLMnDuOXS HP4M96LxLHJlLGCxhEme =ck7M -----END PGP SIGNATURE----- Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc driver specific changes from Olof Johansson: - A long-coming conversion of various platforms to a common LED infrastructure - AT91 is moved over to use the newer MCI driver for MMC - Pincontrol conversions for samsung platforms - DT bindings for gscaler on samsung - i2c driver fixes for tegra, acked by i2c maintainer Fix up conflicts as per Olof. * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) drivers: bus: omap_l3: use resources instead of hardcoded irqs pinctrl: exynos: Fix wakeup IRQ domain registration check pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data pinctrl: exynos: Correct the detection of wakeup-eint node pinctrl: exynos: Mark exynos_irq_demux_eint as inline pinctrl: exynos: Handle only unmasked wakeup interrupts pinctrl: exynos: Fix typos in gpio/wkup _irq_mask pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa drivers: bus: Move the OMAP interconnect driver to drivers/bus/ i2c: tegra: dynamically control fast clk i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20 ARM: tegra: clock: remove unused clock entry for i2c ARM: tegra: clock: add connection name in i2c clock entry i2c: tegra: pass proper name for getting clock ARM: tegra: clock: add i2c fast clock entry in clock table ARM: EXYNOS: Adds G-Scaler device from Device Tree ARM: EXYNOS: Add clock support for G-Scaler ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used ...	2012-10-01 18:46:13 -07:00
Linus Torvalds	2a2bf85f05	ARM: soc: device tree updates ... Device tree conversion and enablement branch. Mostly a bunch of new bindings and setup for various platforms, but the Via/Winchip VT8500 platform is also converted over from being 100% legacy to now use device tree for probing. More of that will come for 3.8. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJQaiKNAAoJEIwa5zzehBx329AP/1TwJk1dTHaAA7vDxyz2mq1E F0MBL9p32R1SczrFGjbmb9ouVW5tTjbK1zted5zBrGBXDIX9Kdz3Dmm7x6b2/JvZ 8yMrdiBNpF3r8au6IaMuMlOq5yAaN+F4SxbC2rE0a9y3YmMZ6ug5dgoZ4O8orAC4 il3eq1sb+rTTPCf7C5cGlKzdRQi2KYdAycpa7ChQCYSamxJjdM7cXR7pohVv9vhd 9sF+h1I0ArxcVYn/mUOoCin8MyIWXlBQvbUnF+3aYO8CO9erhKH/owPngVBWGKZH +X6dk0ChUJfjzaWr2HPZIYUqLUnIoO8TsRhQVmLp1rPrSzSXMG3iDq0M4WEwL4Xo bMbAZ1KWYg53HRqbIOEQk5q9Mg7HUgtbJuOE7WLgBO5ubdKFFWLmDUJ+WVcoWzSW qyWaWpECSptlQjFyqZJd9MjizIDhuYjog2EWaSWXETQ+1XRmCSsqx8AX6n1MVdhP 6jDLnYHYiJoOtGiaDpYxsXgMXdOVsrTegecNduqH/XhdEL1iwy3fwgK1DjoclYoj iFbn0/Tw3N5SvJlG4xitl12DQ7MeCCbfzJGRKenVh9/O4U+qrTbFRmsNaaZw5dA1 bt+iEZ3aU8YBaKj02LexunAevpZJ2rfGNX2tBjQrIzzZK6CZibPWg42qfKJfdn7w etXVVApw5jQjAImY64kh =q7ZY -----END PGP SIGNATURE----- Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc device tree updates from Olof Johansson: "Device tree conversion and enablement branch. Mostly a bunch of new bindings and setup for various platforms, but the Via/Winchip VT8500 platform is also converted over from being 100% legacy to now use device tree for probing. More of that will come for 3.8." Trivial conflicts due to removal of vt8500 files, and one documentation file that was added with slightly different contents both here and in the USb tree. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (212 commits) arm: vt8500: Fixup for missing gpio.h ARM: LPC32xx: LED fix in PHY3250 DTS file ARM: dt: mmp-dma: add binding file arm: vt8500: Update arch-vt8500 to devicetree support. arm: vt8500: gpio: Devicetree support for arch-vt8500 arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices arm: vt8500: clk: Add Common Clock Framework support video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb serial: vt8500: Add devicetree support for vt8500-serial rtc: vt8500: Add devicetree support for vt8500-rtc arm: vt8500: Add device tree files for VIA/Wondermedia SoC's ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support ARM: tegra: Add Avionic Design Medcom-Wide support ARM: tegra: Add Avionic Design Plutux support ARM: tegra: Add Avionic Design Tamonten support ARM: tegra: dts: Add pwm label ARM: ux500: Fix SSP register address format ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT ARM: ux500: Add all encompassing sound node to the HREF Device Tree ...	2012-10-01 18:28:06 -07:00
Linus Torvalds	11801e9de2	ARM: soc: soc-specific updates ... Most notable here is probably the addition of basic support for the BCM2835, an SoC used in some of the Roku 2 players as well as the much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren. It's still early days on mainline support, with just the basics working. But it has to start somewhere! Beyond that there's some conversions of clock infrastructure on tegra to common clock, misc updates for several other platforms, and OMAP now has its own bus (under drivers/bus) to manage its devices through. This branch adds two new directories outside of arch/arm: drivers/irqchip for new irq controllers, and drivers/bus for the above OMAP bus. It's expected that some of the other platforms will migrate parts of their platforms to those directories over time as well. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJQaO2SAAoJEIwa5zzehBx3TBIQAJYc+vpAqiv8MLQ1XV3cLiIP X57fxM9u1A+uXpXsiCTGR+ga8W4a5tlfGMXDBnl/K2bnFs2x11b9NkFLDJ7mdkih J4c/iOWT/mT5suLnnybyg6ZGaxGkAKou2AumiSmkazmq5hGG67hkpAOqFEfDK0J2 Au7/6VN6GZXgiwt8nYaAB/qR5NVcww4m/6GQ2looaWgRLT/wgC3W2ZKvw6zEdl2J OxOpwf2ujG/75zLQaxTeZ5rKnGtAXH4v0KhY9CWQacQPi4L2MVCrvUrDB4j0as4H Wmsu7g6fZA9Vlf1aW/mlDY1ftozfbDaKORoYVS+CsWhm1oiQI5t+sAWRTkbbS85t pobgKfFdvNsl9kS1zRdEddK2tyotwtXh2jz+P/s1l95hfqZ8IdVBJNMlcrHRINOI 2iQXFfGRhCCqMcfFiGXJ43tYja/aCsaIc4M5TrEma57czZT5jK8HSLh0ZUmFYDoe /TfUegVhFASmkNTk7dVZgZ2UoQVkv4lWs+xuf8YgX3UalWgl/YIRRFl4NnylGlEc jjrX3MjXATqXzLPEZaf8dRZHIpB6FYmZq1QqaoefcUQ46gBOueThElZP3sNWR8a2 MOtknauLfLwQbrcH5CmqKpIpXTB4LKgbf/omH2jQlxBhQ5t7PXHVD1NFsbZbwM8J RVCZb4PwqEwOt/wibTrk =BCp4 -----END PGP SIGNATURE----- Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc-specific updates from Olof Johansson: "Most notable here is probably the addition of basic support for the BCM2835, an SoC used in some of the Roku 2 players as well as the much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren. It's still early days on mainline support, with just the basics working. But it has to start somewhere! Beyond that there's some conversions of clock infrastructure on tegra to common clock, misc updates for several other platforms, and OMAP now has its own bus (under drivers/bus) to manage its devices through. This branch adds two new directories outside of arch/arm: drivers/irqchip for new irq controllers, and drivers/bus for the above OMAP bus. It's expected that some of the other platforms will migrate parts of their platforms to those directories over time as well." Fix up trivial conflicts with the clk infrastructure changes. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (62 commits) ARM: shmobile: add new __iomem annotation for new code ARM: LPC32xx: Support GPI 28 ARM: LPC32xx: Platform update for devicetree completion of spi-pl022 ARM: LPC32xx: Board cleanup irqchip: fill in empty Kconfig ARM: SAMSUNG: Add check for NULL in clock interface ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state ARM: EXYNOS: Add bus clock for FIMD ARM: SAMSUNG: Fix HDMI related warnings ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock ARM: EXYNOS: Fix incorrect help text ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture ARM: bcm2835: instantiate console UART ARM: bcm2835: add stub clock driver ARM: bcm2835: add system timer ARM: bcm2835: add interrupt controller driver ARM: add infra-structure for BCM2835 and Raspberry Pi ARM: tegra20: add CPU hotplug support ...	2012-10-01 18:24:44 -07:00
Linus Torvalds	61464c8357	ARM: soc: general cleanups ... This is a large branch that contains a handful of different cleanups: - Fixing up the I/O space remapping on PCI on ARM. This is a series from Rob Herring that restructures how all pci devices allocate I/O space, and it's part of the work to allow multiplatform kernels. - A number of cleanup series for OMAP, moving and removing some headers, sparse irq rework and in general preparation for multiplatform. - Final removal of all non-DT boards for Tegra, it is now device-tree-only! - Removal of a stale platform, nxp4008. It's an old mobile chipset that is no longer in use, and was very likely never really used with a mainline kernel. We have not been able to find anyone interested in keeping it around in the kernel. - Removal of the legacy dmaengine driver on tegra + A handful of other things that I haven't described above. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJQaO1fAAoJEIwa5zzehBx3IPgP/jxoO1flVGNVf0reqqyDro/w prZmp8cNVH9uv8xG9n9vawObrMQ8M6jCJ449fEWuAZ58EXrpIPd0kkm/MOmxp8K1 LNs+q2aXxWpD488+b3RK55g3fksqZutTbn3y6HNuCoLG9l8yT/95KX4IIzfEP2Ch 1TCNHdkTbf37nTBOmKN0x1kahGpWDrOkf9ysHQq+DXAGF4uwNwtR194dqz3HbDND hZqRq7qCLn9OwGRGNicPFoB6UcxwZ/+/+u5sX7nqPGoiPofg977mhWk1DFO15EM3 S+A6g0dZ+XLsL+fFtOl4snSmrG5Et6qTOP0/ItQJgTG+5YdCS09ohCWJwRCBHbgj M5arOkyGFdVAlvX7cUux374sMe0AcqUsEmt79mYuBpIE+pBJaRUoCgDcs9FDZeUB U6WcE4AkxMtW7DtmVW+mF4ls9/K6cRXgWMuHCUmt1o3m3Ly9ITT7j+ntXnD9nuYk ndoVLR6Vxk2BzlkD0JEtg7FRAS9Wgo2DBix05qM1Qkut2iIZRhFQlqJQpNbeNdii /3Lg/hqpAVTZKGCd+paegHez61meyFz2PB2IiE0JKANhKHRCWTWRGgKIXkGyCiXk wJ2iRCOlMEpmpJgCBzfI32ER/hnW4s64iDjgksEwz6pEt7xCbhwgmwrpf0H0KsSF rLroHOMqyISd/Ha52Vin =ck1u -----END PGP SIGNATURE----- Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc general cleanups from Olof Johansson: "This is a large branch that contains a handful of different cleanups: - Fixing up the I/O space remapping on PCI on ARM. This is a series from Rob Herring that restructures how all pci devices allocate I/O space, and it's part of the work to allow multiplatform kernels. - A number of cleanup series for OMAP, moving and removing some headers, sparse irq rework and in general preparation for multiplatform. - Final removal of all non-DT boards for Tegra, it is now device-tree-only! - Removal of a stale platform, nxp4008. It's an old mobile chipset that is no longer in use, and was very likely never really used with a mainline kernel. We have not been able to find anyone interested in keeping it around in the kernel. - Removal of the legacy dmaengine driver on tegra + A handful of other things that I haven't described above." Fix up some conflicts with the staging tree (and because nxp4008 was removed) * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits) ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6 ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus ARM: mmp: using for_each_set_bit to simplify the code ARM: tegra: harmony: fix ldo7 regulator-name ARM: OMAP2+: Make omap4-keypad.h local ARM: OMAP2+: Make l4_3xxx.h local ARM: OMAP2+: Make l4_2xxx.h local ARM: OMAP2+: Make l3_3xxx.h local ARM: OMAP2+: Make l3_2xxx.h local ARM: OMAP1: Move irda.h from plat to mach ARM: OMAP2+: Make hdq1w.h local ARM: OMAP2+: Make gpmc-smsc911x.h local ARM: OMAP2+: Make gpmc-smc91x.h local ARM: OMAP1: Move flash.h from plat to mach ARM: OMAP2+: Make debug-devices.h local ARM: OMAP1: Move board-voiceblue.h from plat to mach ARM: OMAP1: Move board-sx1.h from plat to mach ARM: OMAP2+: Make omap-wakeupgen.h local ARM: OMAP2+: Make omap-secure.h local ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local ...	2012-10-01 18:19:05 -07:00
David S. Miller	d4e6264827	Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT" ... This reverts commit d755998270. It wasn't meant to be applied, commit 342b7b741d ("net: ti cpsw ethernet: set IFCTL_A bit in MACCONTROL") was redone in such a way to make this commit unnecessary. Signed-off-by: David S. Miller <davem@davemloft.net>	2012-10-01 17:39:31 -04:00