This call can fail if there are dirty pages. The preceding call to
filemap_write_and_wait_range() will normally remove dirty pages, but
as inode_lock() is not held over calls to ceph_direct_read_write(), it
could race with non-direct writes and pages could be dirtied
immediately after filemap_write_and_wait_range() returns
If there are dirty pages, they will be removed by the subsequent call
to truncate_inode_pages_range(), so having them here is not a problem.
If the 'ret' value is left holding an error, then in the async IO case
(aio_req is not NULL) the loop that would normally call
ceph_osdc_start_request() will see the error in 'ret' and abort all
requests. This doesn't seem like correct behaviour.
So use separate 'ret2' instead of overloading 'ret'.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
If start_page() fails to add a page to page cache or fails to send
OSD request. It should cal put_page() (instead of free_page()) for
relevant pages.
Besides, start_page() need to cancel fscache readpage if it fails
to send OSD request.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reported-by: Zhi Zhang <zhang.david2011@gmail.com>
current_fs_time() uses struct super_block* as an argument.
As per Linus's suggestion, this is changed to take struct
inode* as a parameter instead. This is because the function
is primarily meant for vfs inode timestamps.
Also the function was renamed as per Arnd's suggestion.
Change all calls to current_fs_time() to use the new
current_time() function instead. current_fs_time() will be
deleted.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This is trivial to do:
- add flags argument to foo_rename()
- check if flags is zero
- assign foo_rename() to .rename2 instead of .rename
This doesn't mean it's impossible to support RENAME_NOREPLACE for these
filesystems, but it is not trivial, like for local filesystems.
RENAME_NOREPLACE must guarantee atomicity (i.e. it shouldn't be possible
for a file to be created on one host while it is overwritten by rename on
another host).
Filesystems converted:
9p, afs, ceph, coda, ecryptfs, kernfs, lustre, ncpfs, nfs, ocfs2, orangefs.
After this, we can get rid of the duplicate interfaces for rename.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: David Howells <dhowells@redhat.com> [AFS]
Acked-by: Mike Marshall <hubcap@omnibond.com>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Mark Fasheh <mfasheh@suse.com>
inode_change_ok() will be resposible for clearing capabilities and IMA
extended attributes and as such will need dentry. Give it as an argument
to inode_change_ok() instead of an inode. Also rename inode_change_ok()
to setattr_prepare() to better relect that it does also some
modifications in addition to checks.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
To avoid clearing of capabilities or security related extended
attributes too early, inode_change_ok() will need to take dentry instead
of inode. ceph_setattr() has the dentry easily available but
__ceph_setattr() is also called from ceph_set_acl() where dentry is not
easily available. Luckily that call path does not need inode_change_ok()
to be called anyway. So reorganize functions a bit so that
inode_change_ok() is called only from paths where dentry is available.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
When file permissions are modified via chmod(2) and the user is not in
the owning group or capable of CAP_FSETID, the setgid bit is cleared in
inode_change_ok(). Setting a POSIX ACL via setxattr(2) sets the file
permissions as well as the new ACL, but doesn't clear the setgid bit in
a similar way; this allows to bypass the check in chmod(2). Fix that.
References: CVE-2016-7097
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Commit f3c4ebe65e ("ceph: using hash value to compose dentry offset")
modified "if (fpos_frag(new_pos) != fi->frag)" to "if (fi->frag |=
fpos_frag(new_pos))" in need_reset_readdir(), thus replacing a
comparison operator with an assignment one.
This looks like a typo which is reported by clang when building the
kernel with some warning flags:
fs/ceph/dir.c:600:22: error: using the result of an assignment as a
condition without parentheses [-Werror,-Wparentheses]
} else if (fi->frag |= fpos_frag(new_pos)) {
~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
fs/ceph/dir.c:600:22: note: place parentheses around the assignment
to silence this warning
} else if (fi->frag |= fpos_frag(new_pos)) {
^
( )
fs/ceph/dir.c:600:22: note: use '!=' to turn this compound
assignment into an inequality comparison
} else if (fi->frag |= fpos_frag(new_pos)) {
^~
!=
Fixes: f3c4ebe65e ("ceph: using hash value to compose dentry offset")
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
pathbase is the base inode; set it to 0 if we've got no path.
Coverity-id: 146348
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
* RADOS namespace support in libceph and CephFS (Zheng Yan and myself).
The stopgaps added in 4.5 to deny access to inodes in namespaces are
removed and CEPH_FEATURE_FS_FILE_LAYOUT_V2 feature bit is now fully
supported.
* A large rework of the MDS cap flushing code (Zheng Yan).
* Handle some of ->d_revalidate() in RCU mode (Jeff Layton). We were
overly pessimistic before, bailing at the first sight of LOOKUP_RCU.
On top of that we've got a few CephFS bug fixes, a couple of cleanups
and Arnd's workaround for a weird genksyms issue.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJXoKLJAAoJEEp/3jgCEfOLDTUIAIcctpKUiNBokc95mQaXYl34
j7lPIaD0/Ur7JPt4nMdtlywYJYSVV2c+SglHztj/+fv0G4bWbLVEFRruh9SwKIci
PzttcmycIAqSn1f5gBZwyQbGuffd/F0EnBj7fFjcukt01i3s1ZQ7t4XtLGtAV0Ts
aIfFtx9SqWig57Z1OZqNgnhnOoh6IqNbic3FL5Hvdl5N5pFbBcQho6Vzoa5O1osH
URG6RmCcO4nykfSoxiivE7UZ+CImsXHkRD7rupBuIjqjZ8wvmZqQF5qxnkb9Dw2F
IkNhrHkTSIiv4EsNPLAETTnFSozrL1nEykKr2FBW+ti8nxNcav+8FgVapqLvFIw=
=gQ0/
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.8-rc1' of git://github.com/ceph/ceph-client
Pull Ceph updates from Ilya Dryomov:
"The highlights are:
- RADOS namespace support in libceph and CephFS (Zheng Yan and
myself). The stopgaps added in 4.5 to deny access to inodes in
namespaces are removed and CEPH_FEATURE_FS_FILE_LAYOUT_V2 feature
bit is now fully supported
- A large rework of the MDS cap flushing code (Zheng Yan)
- Handle some of ->d_revalidate() in RCU mode (Jeff Layton). We were
overly pessimistic before, bailing at the first sight of LOOKUP_RCU
On top of that we've got a few CephFS bug fixes, a couple of cleanups
and Arnd's workaround for a weird genksyms issue"
* tag 'ceph-for-4.8-rc1' of git://github.com/ceph/ceph-client: (34 commits)
ceph: fix symbol versioning for ceph_monc_do_statfs
ceph: Correctly return NXIO errors from ceph_llseek
ceph: Mark the file cache as unreclaimable
ceph: optimize cap flush waiting
ceph: cleanup ceph_flush_snaps()
ceph: kick cap flushes before sending other cap message
ceph: introduce an inode flag to indicates if snapflush is needed
ceph: avoid sending duplicated cap flush message
ceph: unify cap flush and snapcap flush
ceph: use list instead of rbtree to track cap flushes
ceph: update types of some local varibles
ceph: include 'follows' of pending snapflush in cap reconnect message
ceph: update cap reconnect message to version 3
ceph: mount non-default filesystem by name
libceph: fsmap.user subscription support
ceph: handle LOOKUP_RCU in ceph_d_revalidate
ceph: allow dentry_lease_is_valid to work under RCU walk
ceph: clear d_fsinfo pointer under d_lock
ceph: remove ceph_mdsc_lease_release
ceph: don't use ->d_time
...
This changes the vfs dentry hashing to mix in the parent pointer at the
_beginning_ of the hash, rather than at the end.
That actually improves both the hash and the code generation, because we
can move more of the computation to the "static" part of the dcache
setup, and do less at lookup runtime.
It turns out that a lot of other hash users also really wanted to mix in
a base pointer as a 'salt' for the hash, and so the slightly extended
interface ends up working well for other cases too.
Users that want a string hash that is purely about the string pass in a
'salt' pointer of NULL.
* merge branch 'salted-string-hash':
fs/dcache.c: Save one 32-bit multiply in dcache lookup
vfs: make the string hashes salt the hash
ceph_llseek does not correctly return NXIO errors because the 'out' path
always returns 'offset'.
Fixes: 06222e491e ("fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek")
Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Ceph creates multiple caches with the SLAB_RECLAIMABLE flag set, so
that it can satisfy its internal needs. Inspecting the code shows that
most of the caches are indeed reclaimable since they are directly
related to the generic inode/dentry shrinkers. However, one of the
cache used to satisfy struct file is not reclaimable since its
entries are freed only when the last reference to the file is
dropped. If a heavily loaded node opens a lot of files it can
introduce non-trivial discrepancies between memory shown as reclaimable
and what is actually reclaimed when drop_caches is used.
Fix this by removing the reclaimable flag for the file's cache.
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Add a 'wake' flag to ceph_cap_flush struct, which indicates if there
is someone waiting for it to finish. When getting flush ack message,
we check the 'wake' flag in corresponding ceph_cap_flush struct to
decide if we should wake up waiters. One corner case is that the
acked cap flush has 'wake' flags is set, but it is not the first one
on the flushing list. We do not wake up waiters in this case, set
'wake' flags of preceding ceph_cap_flush struct instead
Signed-off-by: Yan, Zheng <zyan@redhat.com>
This patch devide __ceph_flush_snaps() into two stags. In the first
stage, __ceph_flush_snaps() assign snapcaps flush TIDs and add them
to cap flush lists. __ceph_flush_snaps() keeps holding the
i_ceph_lock in this stagge. So inode's auth cap can not change. In
the second stage, __ceph_flush_snaps() send flushsnap cap messages.
i_ceph_lock is unlocked before sending each cap message. If auth cap
changes in the middle, __ceph_flush_snaps() just stops. This is OK
because kick_flushing_inode_caps() will re-send flushsnap cap messages
to inode's new auth MDS.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
make ceph_kick_flushing_caps() ignore inodes whose cap flushes
have already been re-sent by ceph_early_kick_flushing_caps()
Signed-off-by: Yan, Zheng <zyan@redhat.com>
This patch includes following changes
- Assign flush tid to snapcap flush
- Remove session's s_cap_snaps_flushing list. Add inode to session's
s_cap_flushing list instead. Inode is removed from the list when
there is no pending snapcap flush or cap flush.
- make __kick_flushing_caps() re-send both snapcap flushes and cap
flushes.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
We don't have requirement of searching cap flush by TID. In most cases,
we just need to know TID of the oldest cap flush. List is ideal for this
usage.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
To mount non-default filesytem, user currently needs to provide mds
namespace ID. This is inconvenience.
This patch makes user be able to mount filesystem by name. If user
wants to mount non-default filesystem. Client first subscribes to
fsmap.user. Subscribe to mdsmap.<ID> after getting ID of filesystem.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
We can now handle the snapshot cases under RCU, as well as the
non-snapshot case when we don't need to queue up a lease renewal
allow LOOKUP_RCU walks to proceed under those conditions.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Under rcuwalk, we need to take extra care when dereferencing d_parent.
We want to do that once and pass a pointer to dentry_lease_is_valid.
Also, we must ensure that that function can handle the case where we're
racing with d_release. Check whether "di" is NULL under the d_lock, and
just return 0 if so.
Finally, we still need to kick off a renewal job if the lease is getting
close to expiration. If that's the case, then just drop out of rcuwalk
mode since that could block.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
To check for a valid dentry lease, we need to get at the
ceph_dentry_info. Under rcuwalk though, we may end up with a dentry that
is on its way to destruction. Since we need to take the d_lock in
dentry_lease_is_valid already, we can just ensure that we clear the
d_fsinfo pointer out under the same lock before destroying it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
This patch adds codes that decode pool namespace information in
cap message and request reply. Pool namespace is saved in i_layout,
it will be passed to libceph when doing read/write.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Add pool namesapce pointer to struct ceph_file_layout and struct
ceph_object_locator. Pool namespace is used by when mapping object
to PG, it's also used when composing OSD request.
The namespace pointer in struct ceph_file_layout is RCU protected.
So libceph can read namespace without taking lock.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
[idryomov@gmail.com: ceph_oloc_destroy(), misc minor changes]
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Define new ceph_file_layout structure and rename old ceph_file_layout
to ceph_file_layout_legacy. This is preparation for adding namespace
to ceph_file_layout structure.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
An on-stack oid in ceph_ioctl_get_dataloc() is not initialized,
resulting in a WARN and a NULL pointer dereference later on. We will
have more of these on-stack in the future, so fix it with a convenience
macro.
Fixes: d30291b985 ("libceph: variable-sized ceph_object_id")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
->atomic_open() can be given an in-lookup dentry *or* a negative one
found in dcache. Use d_in_lookup() to tell one from another, rather
than d_unhashed().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull vfs fixes from Al Viro:
"Tmpfs readdir throughput regression fix (this cycle) + some -stable
fodder all over the place.
One missing bit is Miklos' tonight locks.c fix - NFS folks had already
grabbed that one by the time I woke up ;-)"
[ The locks.c fix came through the nfsd tree just moments ago ]
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
namespace: update event counter when umounting a deleted dentry
9p: use file_dentry()
ceph: fix d_obtain_alias() misuses
lockless next_positive()
libfs.c: new helper - next_positive()
dcache_{readdir,dir_lseek}(): don't bother with nested ->d_lock
We always mixed in the parent pointer into the dentry name hash, but we
did it late at lookup time. It turns out that we can simplify that
lookup-time action by salting the hash with the parent pointer early
instead of late.
A few other users of our string hashes also wanted to mix in their own
pointers into the hash, and those are updated to use the same mechanism.
Hash users that don't have any particular initial salt can just use the
NULL pointer as a no-salt.
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are several issues in fscache revalidation code.
- In ceph_revalidate_work(), fscache_invalidate() is called when
fscache_check_consistency() return 0. This is complete wrong
because 0 means cache is valid.
- Handle_cap_grant() calls ceph_queue_revalidate() if client
already has CAP_FILE_CACHE. This code is confusing. Client
should revalidate the cache each time it got CAP_FILE_CACHE
anew.
- In Handle_cap_grant(), fscache_invalidate() is called if MDS
revokes CAP_FILE_CACHE. This is inconsistency with the case
that inode get evicted. In the later case, the cache is not
discarded. Client may use the cache when inode is reloaded.
This patch moves the fscache revalidation into ceph_get_caps().
Client revalidates the cache after it gets CAP_FILE_CACHE.
i_rdcache_gen should keep constance while CAP_FILE_CACHE is
used. If i_fscache_gen is not equal to i_rdcache_gen, client
needs to check cache's consistency.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
All other filesystems do not add dirty pages to fscache. They all
disable fscache when inode is opened for write. Only ceph adds
dirty pages to fscache, but the code is buggy.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
For the benefit of every single caller, take osdc instead of map.
Also, now that osdc->osdmap can't ever be NULL, drop the check.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Pull vfs fixes from Al Viro:
"Followups to the parallel lookup work:
- update docs
- restore killability of the places that used to take ->i_mutex
killably now that we have down_write_killable() merged
- Additionally, it turns out that I missed a prerequisite for
security_d_instantiate() stuff - ->getxattr() wasn't the only thing
that could be called before dentry is attached to inode; with smack
we needed the same treatment applied to ->setxattr() as well"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
switch ->setxattr() to passing dentry and inode separately
switch xattr_handler->set() to passing dentry and inode separately
restore killability of old mutex_lock_killable(&inode->i_mutex) users
add down_write_killable_nested()
update D/f/directory-locking
Pull Ceph updates from Sage Weil:
"This changeset has a few main parts:
- Ilya has finished a huge refactoring effort to sync up the
client-side logic in libceph with the user-space client code, which
has evolved significantly over the last couple years, with lots of
additional behaviors (e.g., how requests are handled when cluster
is full and transitions from full to non-full).
This structure of the code is more closely aligned with userspace
now such that it will be much easier to maintain going forward when
behavior changes take place. There are some locking improvements
bundled in as well.
- Zheng adds multi-filesystem support (multiple namespaces within the
same Ceph cluster)
- Zheng has changed the readdir offsets and directory enumeration so
that dentry offsets are hash-based and therefore stable across
directory fragmentation events on the MDS.
- Zheng has a smorgasbord of bug fixes across fs/ceph"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (71 commits)
ceph: fix wake_up_session_cb()
ceph: don't use truncate_pagecache() to invalidate read cache
ceph: SetPageError() for writeback pages if writepages fails
ceph: handle interrupted ceph_writepage()
ceph: make ceph_update_writeable_page() uninterruptible
libceph: make ceph_osdc_wait_request() uninterruptible
ceph: handle -EAGAIN returned by ceph_update_writeable_page()
ceph: make fault/page_mkwrite return VM_FAULT_OOM for -ENOMEM
ceph: block non-fatal signals for fault/page_mkwrite
ceph: make logical calculation functions return bool
ceph: tolerate bad i_size for symlink inode
ceph: improve fragtree change detection
ceph: keep leaf frag when updating fragtree
ceph: fix dir_auth check in ceph_fill_dirfrag()
ceph: don't assume frag tree splits in mds reply are sorted
ceph: fix inode reference leak
ceph: using hash value to compose dentry offset
ceph: don't forbid marking directory complete after forward seek
ceph: record 'offset' for each entry of readdir result
ceph: define 'end/complete' in readdir reply as bit flags
...
We should reset i_requested_max_size before waking the waiters.
(zero i_requested_max_size make waiter re-request the max size)
Signed-off-by: Yan, Zheng <zyan@redhat.com>
truncate_pagecache() drops dirty pages, it's dangerous to use it
to invalidate read cache. Besides, we shouldn't start invalidating
read cache while there are buffer writers. Because buffer writers
may add dirty pages later.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
writepage() can be interrupted when it's called by direct memory
reclaimer (the direct memory relaimer is killed). To avoid lossing
data, we redirty the page.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
ceph_update_writeable_page() is used by ceph_write_begin(). It beaks
atomicity of write operation if it's interruptible.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
when ceph_update_writeable_page() return -EAGAIN, caller should
lock the page and call ceph_update_writeable_page() again.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Fault and page_mkwrite are supposed to be uninterruptable. But they
call ceph functions that are interruptible. So they should block
signals before calling functions that are interruptible
Signed-off-by: Yan, Zheng <zyan@redhat.com>
This patch makes serverl logical caculation functions return bool to
improve readability due to these particular functions only using 0/1
as their return value.
No functional change.
Signed-off-by: Zhang Zhuoyu <zhangzhuoyu@cmss.chinamobile.com>
Nodes in i_fragtree are sorted according to ceph_compare_frag().
It means frag node in i_fragtree always follow its direct parent
node. To check if a leaf node is valid, we just need to check if
it's child of previous split node.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
The algorithm that updates i_fragtree relies on that the frag tree
splits in mds reply are of the same order of i_fragtree. This is not
true because current MDS encodes frag tree splits in ascending order
of (unsigned)frag_t. But nodes in i_fragtree are sorted according to
ceph_frag_compare().
The fix is sort the frag tree splits first, then updates i_fragtree.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
If MDS sorts dentries in dirfrag in hash order, we use hash value to
compose dentry offset. dentry offset is:
(0xff << 52) | ((24 bits hash) << 28) |
(the nth entry hash hash collision)
This offset is stable across directory fragmentation. This alos means
there is no need to reset readdir offset if directory get fragmented
in the middle of readdir.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Forward seek within same frag does not update fi->last_name, it will
not affect contents of later readdir reply. So there is no need to
forbid marking directory complete
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Set a flag in readdir request, which indicates that client interprets
'end/complete' as bit flags. So that mds can reply additional flags in
readdir reply.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Setxattr with NULL value and XATTR_REPLACE flag should be equivalent
to removexattr. But current MDS does not support deleting vxattrs through
MDS_OP_SETXATTR request. The workaround is sending MDS_OP_RMXATTR request
if setxattr actually removs xattr.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
truncate_pagecache() may decrease inode's reference. This can cause
deadlock if inode's last reference is dropped and iput_final() wants
to evict the inode. (evict() calls inode_wait_for_writeback(), which
waits for ceph_writepages_start() to return).
The fix is use work thead to truncate dirty pages. Also add 'forced
umount' check to ceph_update_writeable_page(), which prevents new
pages getting dirty.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
When mds session gets killed, read/write operation may hang.
Client waits for Frw caps, but mds does not know what caps client
wants. To recover this, client sends an open request to mds. The
request will tell mds what caps client wants.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
To access non-default filesystem, we just need to subscribe to
mdsmap.<MDS_NAMESPACE_ID> and add a new mount option for mds
namespace id.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
[idryomov@gmail.com: switch to a new libceph API]
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This is a major sync up, up to ~Jewel. The highlights are:
- per-session request trees (vs a global per-client tree)
- per-session locking (vs a global per-client rwlock)
- homeless OSD session
- no ad-hoc global per-client lists
- support for pool quotas
- foundation for watch/notify v2 support
- foundation for map check (pool deletion detection) support
The switchover is incomplete: lingering requests can be setup and
teared down but aren't ever reestablished. This functionality is
restored with the introduction of the new lingering infrastructure
(ceph_osd_linger_request, linger_work, etc) in a later commit.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If you specify ACK | ONDISK and set ->r_unsafe_callback, both
->r_callback and ->r_unsafe_callback(true) are called on ack. This is
very confusing. Redo this so that only one of them is called:
->r_unsafe_callback(true), on ack
->r_unsafe_callback(false), on commit
or
->r_callback, on ack|commit
Decode everything in decode_MOSDOpReply() to reduce clutter.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
finish_read(), its only user, uses it to get to hdr.data_len, which is
what ->r_result is set to on success. This gains us the ability to
safely call callbacks from contexts other than reply, e.g. map check.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The crux of this is getting rid of ceph_osdc_build_request(), so that
MOSDOp can be encoded not before but after calc_target() calculates the
actual target. Encoding now happens within ceph_osdc_start_request().
Also nuked is the accompanying bunch of pointers into the encoded
buffer that was used to update fields on each send - instead, the
entire front is re-encoded. If we want to support target->name_len !=
base->name_len in the future, there is no other way, because oid is
surrounded by other fields in the encoded buffer.
Encoding OSD ops and adding data items to the request message were
mixed together in osd_req_encode_op(). While we want to re-encode OSD
ops, we don't want to add duplicate data items to the message when
resending, so all call to ceph_osdc_msg_data_add() are factored out
into a new setup_request_data().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Introduce ceph_osd_request_target, containing all mapping-related
fields of ceph_osd_request and calc_target() for calculating mappings
and populating it.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Rename ceph_calc_pg_primary() to ceph_pg_to_acting_primary() to
emphasise that it returns acting primary.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Rename ceph_oloc_oid_to_pg() to ceph_object_locator_to_pg(). Emphasise
that returned is raw PG and return -ENOENT instead of -EIO if the pool
doesn't exist.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Given
struct foo {
u64 id;
struct rb_node bar_node;
};
generate insert_bar(), erase_bar() and lookup_bar() functions with
DEFINE_RB_FUNCS(bar, struct foo, id, bar_node)
The key is assumed to be an integer (u64, int, etc), compared with
< and >. nodefld has to be initialized with RB_CLEAR_NODE().
Start using it for MDS, MON and OSD requests and OSD sessions.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Currently ceph_object_id can hold object names of up to 100
(CEPH_MAX_OID_NAME_LEN) characters. This is enough for all use cases,
expect one - long rbd image names:
- a format 1 header is named "<imgname>.rbd"
- an object that points to a format 2 header is named "rbd_id.<imgname>"
We operate on these potentially long-named objects during rbd map, and,
for format 1 images, during header refresh. (A format 2 header name is
a small system-generated string.)
Lift this 100 character limit by making ceph_object_id be able to point
to an externally-allocated string. Apart from being able to work with
almost arbitrarily-long named objects, this allows us to reduce the
size of ceph_object_id from >100 bytes to 64 bytes.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The size of ->r_request and ->r_reply messages depends on the size of
the object name (ceph_object_id), while the size of ceph_osd_request is
fixed. Move message allocation into a separate function that would
have to be called after ceph_object_id and ceph_object_locator (which
is also going to become variable in size with RADOS namespaces) have
been filled in:
req = ceph_osdc_alloc_request(...);
<fill in req->r_base_oid>
<fill in req->r_base_oloc>
ceph_osdc_alloc_messages(req);
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Pull remaining vfs xattr work from Al Viro:
"The rest of work.xattr (non-cifs conversions)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
btrfs: Switch to generic xattr handlers
ubifs: Switch to generic xattr handlers
jfs: Switch to generic xattr handlers
jfs: Clean up xattr name mapping
gfs2: Switch to generic xattr handlers
ceph: kill __ceph_removexattr()
ceph: Switch to generic xattr handlers
ceph: Get rid of d_find_alias in ceph_set_acl
Pull vfs cleanups from Al Viro:
"More cleanups from Christoph"
* 'work.preadv2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
nfsd: use RWF_SYNC
fs: add RWF_DSYNC aand RWF_SYNC
ceph: use generic_write_sync
fs: simplify the generic_write_sync prototype
fs: add IOCB_SYNC and IOCB_DSYNC
direct-io: remove the offset argument to dio_complete
direct-io: eliminate the offset argument to ->direct_IO
xfs: eliminate the pos variable in xfs_file_dio_aio_write
filemap: remove the pos argument to generic_file_direct_write
filemap: remove pos variables in generic_file_read_iter
Backmerge to resolve a conflict in ovl_lookup_real();
"ovl_lookup_real(): use lookup_one_len_unlocked()" instead,
but it was too late in the cycle to rebase.
Including blkdev_direct_IO and dax_do_io. It has to be ki_pos to actually
work, so eliminate the superflous argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Starting the kernel client with cephx disabled and then enabling cephx
and restarting userspace daemons can result in a crash:
[262671.478162] BUG: unable to handle kernel paging request at ffffebe000000000
[262671.531460] IP: [<ffffffff811cd04a>] kfree+0x5a/0x130
[262671.584334] PGD 0
[262671.635847] Oops: 0000 [#1] SMP
[262672.055841] CPU: 22 PID: 2961272 Comm: kworker/22:2 Not tainted 4.2.0-34-generic #39~14.04.1-Ubuntu
[262672.162338] Hardware name: Dell Inc. PowerEdge R720/068CDY, BIOS 2.4.3 07/09/2014
[262672.268937] Workqueue: ceph-msgr con_work [libceph]
[262672.322290] task: ffff88081c2d0dc0 ti: ffff880149ae8000 task.ti: ffff880149ae8000
[262672.428330] RIP: 0010:[<ffffffff811cd04a>] [<ffffffff811cd04a>] kfree+0x5a/0x130
[262672.535880] RSP: 0018:ffff880149aeba58 EFLAGS: 00010286
[262672.589486] RAX: 000001e000000000 RBX: 0000000000000012 RCX: ffff8807e7461018
[262672.695980] RDX: 000077ff80000000 RSI: ffff88081af2be04 RDI: 0000000000000012
[262672.803668] RBP: ffff880149aeba78 R08: 0000000000000000 R09: 0000000000000000
[262672.912299] R10: ffffebe000000000 R11: ffff880819a60e78 R12: ffff8800aec8df40
[262673.021769] R13: ffffffffc035f70f R14: ffff8807e5b138e0 R15: ffff880da9785840
[262673.131722] FS: 0000000000000000(0000) GS:ffff88081fac0000(0000) knlGS:0000000000000000
[262673.245377] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[262673.303281] CR2: ffffebe000000000 CR3: 0000000001c0d000 CR4: 00000000001406e0
[262673.417556] Stack:
[262673.472943] ffff880149aeba88 ffff88081af2be04 ffff8800aec8df40 ffff88081af2be04
[262673.583767] ffff880149aeba98 ffffffffc035f70f ffff880149aebac8 ffff8800aec8df00
[262673.694546] ffff880149aebac8 ffffffffc035c89e ffff8807e5b138e0 ffff8805b047f800
[262673.805230] Call Trace:
[262673.859116] [<ffffffffc035f70f>] ceph_x_destroy_authorizer+0x1f/0x50 [libceph]
[262673.968705] [<ffffffffc035c89e>] ceph_auth_destroy_authorizer+0x3e/0x60 [libceph]
[262674.078852] [<ffffffffc0352805>] put_osd+0x45/0x80 [libceph]
[262674.134249] [<ffffffffc035290e>] remove_osd+0xae/0x140 [libceph]
[262674.189124] [<ffffffffc0352aa3>] __reset_osd+0x103/0x150 [libceph]
[262674.243749] [<ffffffffc0354703>] kick_requests+0x223/0x460 [libceph]
[262674.297485] [<ffffffffc03559e2>] ceph_osdc_handle_map+0x282/0x5e0 [libceph]
[262674.350813] [<ffffffffc035022e>] dispatch+0x4e/0x720 [libceph]
[262674.403312] [<ffffffffc034bd91>] try_read+0x3d1/0x1090 [libceph]
[262674.454712] [<ffffffff810ab7c2>] ? dequeue_entity+0x152/0x690
[262674.505096] [<ffffffffc034cb1b>] con_work+0xcb/0x1300 [libceph]
[262674.555104] [<ffffffff8108fb3e>] process_one_work+0x14e/0x3d0
[262674.604072] [<ffffffff810901ea>] worker_thread+0x11a/0x470
[262674.652187] [<ffffffff810900d0>] ? rescuer_thread+0x310/0x310
[262674.699022] [<ffffffff810957a2>] kthread+0xd2/0xf0
[262674.744494] [<ffffffff810956d0>] ? kthread_create_on_node+0x1c0/0x1c0
[262674.789543] [<ffffffff817bd81f>] ret_from_fork+0x3f/0x70
[262674.834094] [<ffffffff810956d0>] ? kthread_create_on_node+0x1c0/0x1c0
What happens is the following:
(1) new MON session is established
(2) old "none" ac is destroyed
(3) new "cephx" ac is constructed
...
(4) old OSD session (w/ "none" authorizer) is put
ceph_auth_destroy_authorizer(ac, osd->o_auth.authorizer)
osd->o_auth.authorizer in the "none" case is just a bare pointer into
ac, which contains a single static copy for all services. By the time
we get to (4), "none" ac, freed in (2), is long gone. On top of that,
a new vtable installed in (3) points us at ceph_x_destroy_authorizer(),
so we end up trying to destroy a "none" authorizer with a "cephx"
destructor operating on invalid memory!
To fix this, decouple authorizer destruction from ac and do away with
a single static "none" authorizer by making a copy for each OSD or MDS
session. Authorizers themselves are independent of ac and so there is
no reason for destroy_authorizer() to be an ac op. Make it an op on
the authorizer itself by turning ceph_authorizer into a real struct.
Fixes: http://tracker.ceph.com/issues/15447
Reported-by: Alan Zhang <alan.zhang@linux.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
when removing a xattr, generic_removexattr() calls __ceph_setxattr()
with NULL value and XATTR_REPLACE flag. __ceph_removexattr() is not
used any more.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a catch-all xattr handler at the end of ceph_xattr_handlers. Check
for valid attribute names there, and remove those checks from
__ceph_{get,set,remove}xattr instead. No "system.*" xattrs need to be
handled by the catch-all handler anymore.
The set xattr handler is called with a NULL value to indicate that the
attribute should be removed; __ceph_setxattr already handles that case
correctly (ceph_set_acl could already calling __ceph_setxattr with a NULL
value).
Move the check for snapshots from ceph_{set,remove}xattr into
__ceph_{set,remove}xattr. With that, ceph_{get,set,remove}xattr can be
replaced with the generic iops.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Create a variant of ceph_setattr that takes an inode instead of a
dentry. Change __ceph_setxattr (and also __ceph_removexattr) to take an
inode instead of a dentry. Use those in ceph_set_acl so that we no
longer need a dentry there.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When get_acl() is called for an inode whose ACL is not cached yet, the
get_acl inode operation is called to fetch the ACL from the filesystem.
The inode operation is responsible for updating the cached acl with
set_cached_acl(). This is done without locking at the VFS level, so
another task can call set_cached_acl() or forget_cached_acl() before the
get_acl inode operation gets to calling set_cached_acl(), and then
get_acl's call to set_cached_acl() results in caching an outdate ACL.
Prevent this from happening by setting the cached ACL pointer to a
task-specific sentinel value before calling the get_acl inode operation.
Move the responsibility for updating the cached ACL from the get_acl
inode operations to get_acl(). There, only set the cached ACL if the
sentinel value hasn't changed.
The sentinel values are chosen to have odd values. Likewise, the value
of ACL_NOT_CACHED is odd. In contrast, ACL object pointers always have
an even value (ACLs are aligned in memory). This allows to distinguish
uncached ACLs values from ACL objects.
In addition, switch from guarding inode->i_acl and inode->i_default_acl
upates by the inode->i_lock spinlock to using xchg() and cmpxchg().
Filesystems that do not want ACLs returned from their get_acl inode
operations to be cached must call forget_cached_acl() to prevent the VFS
from doing so.
(Patch written by Al Viro and Andreas Gruenbacher.)
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use kmem_cache_zalloc() instead of kmem_cache_alloc() with flag GFP_ZERO.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If dentry has no lease, ceph_d_revalidate() previously return 0.
This causes VFS to invalidate the dentry and create a new dentry
for later lookup. Invalidating a dentry also detach any underneath
mount points. So mount point inside cephfs can disapear mystically
(even the mount point is not modified by other hosts).
The fix is using lookup request to revalidate dentry without lease.
This can partly solve the mount points disapear issue (as long as
the mount point is not modified by other hosts)
Signed-off-by: Yan, Zheng <zyan@redhat.com>
When security is enabled, security module can call filesystem's
getxattr/setxattr callbacks during d_instantiate(). For cephfs,
d_instantiate() is usually called by MDS' dispatch thread, while
handling MDS reply. If the MDS reply does not include xattrs and
corresponding caps, getxattr/setxattr need to send a new request
to MDS and waits for the reply. This makes MDS' dispatch sleep,
nobody handles later MDS replies.
The fix is make sure lookup/atomic_open reply include xattrs and
corresponding caps. So getxattr can be handled by cached xattrs.
This requires some modification to both MDS and request message.
(Client tells MDS what caps it wants; MDS encodes proper caps in
the reply)
Smack security module may call setxattr during d_instantiate().
Unlike getxattr, we can't force MDS to issue CEPH_CAP_XATTR_EXCL
to us. So just make setxattr return error when called by MDS'
dispatch thread.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
If page->mapping is NULL, releasepage() callback does not get called.
Remove the unnecessary NULL check to make static code analysis tool
happy
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Readdir cache uses page cache to save dentry pointers. When adding
dentry pointers to middle of a page, we need to make sure the page
already exists. Otherwise the beginning part of the page will be
invalid pointers.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
ceph_empty_snapc->num_snaps == 0 at all times. Passing such a snapc to
ceph_osdc_alloc_request() (possibly through ceph_osdc_new_request()) is
equivalent to passing NULL, as ceph_osdc_alloc_request() uses it only
for sizing the request message.
Further, in all four cases the subsequent ceph_osdc_build_request() is
passed NULL for snapc, meaning that 0 is encoded for seq and num_snaps
and making ceph_empty_snapc entirely useless. The two cases where it
actually mattered were removed in commits 8605609049 ("ceph: avoid
sending unnessesary FLUSHSNAP message") and 23078637e0 ("ceph: fix
queuing inode to mdsdir's snaprealm").
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
A negative value rc compared to the positive value ENOENT in the
finish_read() function.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
CURRENT_TIME macro is not appropriate for filesystems as it
doesn't use the right granularity for filesystem timestamps.
Use current_fs_time() instead.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
This patch makes ceph_writepages_start() try using single OSD request
to write all dirty pages within a strip unit. When a nonconsecutive
dirty page is found, ceph_writepages_start() tries starting a new write
operation to existing OSD request. If it succeeds, it uses the new
operation to writeback the dirty page.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
When rbytes mount option is enabled, directory size is recursive
size. Recursive size is not updated instantly. This can cause
directory size to change between successive stat(1)
Signed-off-by: Yan, Zheng <zyan@redhat.com>
It is currently hard-coded in the mon_client that mdsmap and monmap
subs are continuous, while osdmap sub is always "onetime". To better
handle full clusters/pools in the osd_client, we need to be able to
issue continuous osdmap subs. Revamp subs code to allow us to specify
for each sub whether it should be continuous or not.
Although not strictly required for the above, switch to SUBSCRIBE2
protocol while at it, eliminating the ambiguity between a request for
"every map since X" and a request for "just the latest" when we don't
have a map yet (i.e. have epoch 0). SUBSCRIBE2 feature bit is now
required - it's been supported since pre-argonaut (2010).
Move "got mdsmap" call to the end of ceph_mdsc_handle_map() - calling
in before we validate the epoch and successfully install the new map
can mess up mon_client sub state.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Pull vfs updates from Al Viro:
- Preparations of parallel lookups (the remaining main obstacle is the
need to move security_d_instantiate(); once that becomes safe, the
rest will be a matter of rather short series local to fs/*.c
- preadv2/pwritev2 series from Christoph
- assorted fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (32 commits)
splice: handle zero nr_pages in splice_to_pipe()
vfs: show_vfsstat: do not ignore errors from show_devname method
dcache.c: new helper: __d_add()
don't bother with __d_instantiate(dentry, NULL)
untangle fsnotify_d_instantiate() a bit
uninline d_add()
replace d_add_unique() with saner primitive
quota: use lookup_one_len_unlocked()
cifs_get_root(): use lookup_one_len_unlocked()
nfs_lookup: don't bother with d_instantiate(dentry, NULL)
kill dentry_unhash()
ceph_fill_trace(): don't bother with d_instantiate(dn, NULL)
autofs4: don't bother with d_instantiate(dentry, NULL) in ->lookup()
configfs: move d_rehash() into configfs_create() for regular files
ceph: don't bother with d_rehash() in splice_dentry()
namei: teach lookup_slow() to skip revalidate
namei: massage lookup_slow() to be usable by lookup_one_len_unlocked()
lookup_one_len_unlocked(): use lookup_dcache()
namei: simplify invalidation logics in lookup_dcache()
namei: change calling conventions for lookup_{fast,slow} and follow_managed()
...
... and use d_add(dn, NULL) in case we need to hash a negative
unhashed rather than using d_rehash() directly.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add support for the format change of MClientReply/MclientCaps.
Also add code that denies access to inodes with pool_ns layouts.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Pull Ceph updates from Sage Weil:
"The two main changes are aio support in CephFS, and a series that
fixes several issues in the authentication key timeout/renewal code.
On top of that are a variety of cleanups and minor bug fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
libceph: remove outdated comment
libceph: kill off ceph_x_ticket_handler::validity
libceph: invalidate AUTH in addition to a service ticket
libceph: fix authorizer invalidation, take 2
libceph: clear messenger auth_retry flag if we fault
libceph: fix ceph_msg_revoke()
libceph: use list_for_each_entry_safe
ceph: use i_size_{read,write} to get/set i_size
ceph: re-send AIO write request when getting -EOLDSNAP error
ceph: Asynchronous IO support
ceph: Avoid to propagate the invalid page point
ceph: fix double page_unlock() in page_mkwrite()
rbd: delete an unnecessary check before rbd_dev_destroy()
libceph: use list_next_entry instead of list_entry_next
ceph: ceph_frag_contains_value can be boolean
ceph: remove unused functions in ceph_frag.h
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).
Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cap message from MDS can update i_size. In that case, we don't
hold i_mutex. So it's unsafe to directly access inode->i_size
while holding i_mutex.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
When receiving -EOLDSNAP from OSD, we need to re-send corresponding
write request. Due to locking issue, we can send new request inside
another OSD request's complete callback. So we use worker to re-send
request for AIO write.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
The basic idea of AIO support is simple, just call kiocb::ki_complete()
in OSD request's complete callback. But there are several special cases.
when IO span multiple objects, we need to wait until all OSD requests
are complete, then call kiocb::ki_complete(). Error handling in this case
is tricky too. For simplify, AIO both span multiple objects and extends
i_size are not allowed.
Another special case is check EOF for reading (other client can write to
the file and extend i_size concurrently). For simplify, the direct-IO/AIO
code path does do the check, fallback to normal syn read instead.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
The variant pagep will still get the invalid page point, although ceph
fails in function ceph_update_writeable_page.
To fix this issue, Assigne the page to pagep until there is no failure
in function ceph_update_writeable_page.
Signed-off-by: Minfei Huang <mnfhuang@gmail.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
ceph_update_writeable_page() unlocks the page on errors, so
page_mkwrite() should not unlock the page again.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Mark those kmem allocations that are known to be easily triggered from
userspace as __GFP_ACCOUNT/SLAB_ACCOUNT, which makes them accounted to
memcg. For the list, see below:
- threadinfo
- task_struct
- task_delay_info
- pid
- cred
- mm_struct
- vm_area_struct and vm_region (nommu)
- anon_vma and anon_vma_chain
- signal_struct
- sighand_struct
- fs_struct
- files_struct
- fdtable and fdtable->full_fds_bits
- dentry and external_name
- inode for all filesystems. This is the most tedious part, because
most filesystems overwrite the alloc_inode method.
The list is far from complete, so feel free to add more objects.
Nevertheless, it should be close to "account everything" approach and
keep most workloads within bounds. Malevolent users will be able to
breach the limit, but this was possible even with the former "account
everything" approach (simply because it did not account everything in
fact).
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull vfs xattr updates from Al Viro:
"Andreas' xattr cleanup series.
It's a followup to his xattr work that went in last cycle; -0.5KLoC"
* 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
xattr handlers: Simplify list operation
ocfs2: Replace list xattr handler operations
nfs: Move call to security_inode_listsecurity into nfs_listxattr
xfs: Change how listxattr generates synthetic attributes
tmpfs: listxattr should include POSIX ACL xattrs
tmpfs: Use xattr handler infrastructure
btrfs: Use xattr handler infrastructure
vfs: Distinguish between full xattr names and proper prefixes
posix acls: Remove duplicate xattr name definitions
gfs2: Remove gfs2_xattr_acl_chmod
vfs: Remove vfs_xattr_cmp
new method: ->get_link(); replacement of ->follow_link(). The differences
are:
* inode and dentry are passed separately
* might be called both in RCU and non-RCU mode;
the former is indicated by passing it a NULL dentry.
* when called that way it isn't allowed to block
and should return ERR_PTR(-ECHILD) if it needs to be called
in non-RCU mode.
It's a flagday change - the old method is gone, all in-tree instances
converted. Conversion isn't hard; said that, so far very few instances
do not immediately bail out when called in RCU mode. That'll change
in the next commits.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Remove POSIX_ACL_XATTR_{ACCESS,DEFAULT} and GFS2_POSIX_ACL_{ACCESS,DEFAULT}
and replace them with the definitions in <include/uapi/linux/xattr.h>.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull Ceph updates from Sage Weil:
"There are several patches from Ilya fixing RBD allocation lifecycle
issues, a series adding a nocephx_sign_messages option (and associated
bug fixes/cleanups), several patches from Zheng improving the
(directory) fsync behavior, a big improvement in IO for direct-io
requests when striping is enabled from Caifeng, and several other
small fixes and cleanups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
libceph: clear msg->con in ceph_msg_release() only
libceph: add nocephx_sign_messages option
libceph: stop duplicating client fields in messenger
libceph: drop authorizer check from cephx msg signing routines
libceph: msg signing callouts don't need con argument
libceph: evaluate osd_req_op_data() arguments only once
ceph: make fsync() wait unsafe requests that created/modified inode
ceph: add request to i_unsafe_dirops when getting unsafe reply
libceph: introduce ceph_x_authorizer_cleanup()
ceph: don't invalidate page cache when inode is no longer used
rbd: remove duplicate calls to rbd_dev_mapping_clear()
rbd: set device_type::release instead of device::release
rbd: don't free rbd_dev outside of the release callback
rbd: return -ENOMEM instead of pool id if rbd_dev_create() fails
libceph: use local variable cursor instead of &msg->cursor
libceph: remove con argument in handle_reply()
ceph: combine as many iovec as possile into one OSD request
ceph: fix message length computation
ceph: fix a comment typo
rbd: drop null test before destroy functions
There are many places which use mapping_gfp_mask to restrict a more
generic gfp mask which would be used for allocations which are not
directly related to the page cache but they are performed in the same
context.
Let's introduce a helper function which makes the restriction explicit and
easier to track. This patch doesn't introduce any functional changes.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can use msg->con instead - at the point we sign an outgoing message
or check the signature on the incoming one, msg->con is always set. We
wouldn't know how to sign a message without an associated session (i.e.
msg->con == NULL) and being able to sign a message using an explicitly
provided authorizer is of no use.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If we get a unsafe reply for request that created/modified inode,
add the unsafe request to a list in the newly created/modified
inode. So we can make fsync() wait these unsafe requests.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Previously we add request to i_unsafe_dirops when registering
request. So ceph_fsync() also waits for imcomplete requests.
This is unnecessary, ceph_fsync() only needs to wait unsafe
requests.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
ceph_check_caps() invalidate page cache when inode is not used
by any open file. This behaviour is not friendly for workload
that repeatly read files.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Both ceph_sync_direct_write and ceph_sync_read iterate iovec elements
one by one, send one OSD request for each iovec. This is sub-optimal,
We can combine serveral iovec into one page vector, and send an OSD
request for the whole page vector.
Signed-off-by: Zhu, Caifeng <zhucaifeng@unissoft-nj.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
create_request_message() computes the maximum length of a message,
but uses the wrong type for the time stamp: sizeof(struct timespec)
may be 8 or 16 depending on the architecture, while sizeof(struct
ceph_timespec) is always 8, and that is what gets put into the
message.
Found while auditing the uses of timespec for y2038 problems.
Fixes: b8e69066d8 ("ceph: include time stamp in every MDS request")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Instead of having users check for FL_POSIX or FL_FLOCK to call the correct
locks API function, use the check within locks_lock_inode_wait(). This
allows for some later cleanup.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Pull Ceph update from Sage Weil:
"There are a few fixes for snapshot behavior with CephFS and support
for the new keepalive protocol from Zheng, a libceph fix that affects
both RBD and CephFS, a few bug fixes and cleanups for RBD from Ilya,
and several small fixes and cleanups from Jianpeng and others"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: improve readahead for file holes
ceph: get inode size for each append write
libceph: check data_len in ->alloc_msg()
libceph: use keepalive2 to verify the mon session is alive
rbd: plug rbd_dev->header.object_prefix memory leak
rbd: fix double free on rbd_dev->header_name
libceph: set 'exists' flag for newly up osd
ceph: cleanup use of ceph_msg_get
ceph: no need to get parent inode in ceph_open
ceph: remove the useless judgement
ceph: remove redundant test of head->safe and silence static analysis warnings
ceph: fix queuing inode to mdsdir's snaprealm
libceph: rename con_work() to ceph_con_workfn()
libceph: Avoid holding the zero page on ceph_msgr_slab_init errors
libceph: remove the unused macro AES_KEY_SIZE
ceph: invalidate dirty pages after forced umount
ceph: EIO all operations after forced umount
With two exceptions (drm/qxl and drm/radeon) all vm_operations_struct
structs should be constant.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When readahead encounters file holes, osd reply returns error -ENOENT,
finish_read() skips adding pages to the the page cache. So readahead
does not work for file holes. The fix is adding zero pages to the
page cache when -ENOENT is returned.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
parent inode is needed in creating new inode case. For ceph_open,
the target inode already exists.
Signed-off-by: Jianpeng Ma <jianpeng.ma@intel.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
During MDS failovers, MClientSnap message may cause kclient to move
some inodes from root directory's snaprealm to mdsdir's snaprealm
and queue snapshots for these inodes. For a FS has never created any
snapshot, both root directory's snaprealm and mdsdir's snaprealm
share the same snapshot contexts (both are ceph_empty_snapc). This
confuses ceph_put_wrbuffer_cap_refs(), make it unable to distinguish
snapshot buffers from head buffers.
The fix is do not use ceph_empty_snapc as snaprealm's cached context.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
After forced umount, ceph_writepages_start() skips flushing dirty
pages. To make sure inode's reference count get dropped to zero,
we need to invalidate dirty pages.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
This patch makes try_get_cap_refs() and __do_request() check
if the file system was forced umount, and return -EIO if it was.
This patch also adds a helper function to drops dirty caps and
wakes up blocking operation.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Many file systems that implement the show_options hook fail to correctly
escape their output which could lead to unescaped characters (e.g. new
lines) leaking into /proc/mounts and /proc/[pid]/mountinfo files. This
could lead to confusion, spoofed entries (resulting in things like
systemd issuing false d-bus "mount" notifications), and who knows what
else. This looks like it would only be the root user stepping on
themselves, but it's possible weird things could happen in containers or
in other situations with delegated mount privileges.
Here's an example using overlay with setuid fusermount trusting the
contents of /proc/mounts (via the /etc/mtab symlink). Imagine the use
of "sudo" is something more sneaky:
$ BASE="ovl"
$ MNT="$BASE/mnt"
$ LOW="$BASE/lower"
$ UP="$BASE/upper"
$ WORK="$BASE/work/ 0 0
none /proc fuse.pwn user_id=1000"
$ mkdir -p "$LOW" "$UP" "$WORK"
$ sudo mount -t overlay -o "lowerdir=$LOW,upperdir=$UP,workdir=$WORK" none /mnt
$ cat /proc/mounts
none /root/ovl/mnt overlay rw,relatime,lowerdir=ovl/lower,upperdir=ovl/upper,workdir=ovl/work/ 0 0
none /proc fuse.pwn user_id=1000 0 0
$ fusermount -u /proc
$ cat /proc/mounts
cat: /proc/mounts: No such file or directory
This fixes the problem by adding new seq_show_option and
seq_show_option_n helpers, and updating the vulnerable show_option
handlers to use them as needed. Some, like SELinux, need to be open
coded due to unusual existing escape mechanisms.
[akpm@linux-foundation.org: add lost chunk, per Kees]
[keescook@chromium.org: seq_show_option should be using const parameters]
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Jan Kara <jack@suse.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Cc: J. R. Okajima <hooanon05g@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
commit e548e9b93d makes the kclient
only re-send cap flush once during MDS failover. If the kclient sends
a cap flush after MDS enters reconnect stage but before MDS recovers.
The kclient will skip re-sending the same cap flush when MDS recovers.
This causes problem for newly created inode. The MDS handles cap
flushes before replaying unsafe requests, so it's possible that MDS
find corresponding inode is missing when handling cap flush. The fix
is reverting to old behaviour: always re-send when MDS recovers
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Pull more vfs updates from Al Viro:
"Assorted VFS fixes and related cleanups (IMO the most interesting in
that part are f_path-related things and Eric's descriptor-related
stuff). UFS regression fixes (it got broken last cycle). 9P fixes.
fs-cache series, DAX patches, Jan's file_remove_suid() work"
[ I'd say this is much more than "fixes and related cleanups". The
file_table locking rule change by Eric Dumazet is a rather big and
fundamental update even if the patch isn't huge. - Linus ]
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (49 commits)
9p: cope with bogus responses from server in p9_client_{read,write}
p9_client_write(): avoid double p9_free_req()
9p: forgetting to cancel request on interrupted zero-copy RPC
dax: bdev_direct_access() may sleep
block: Add support for DAX reads/writes to block devices
dax: Use copy_from_iter_nocache
dax: Add block size note to documentation
fs/file.c: __fget() and dup2() atomicity rules
fs/file.c: don't acquire files->file_lock in fd_install()
fs:super:get_anon_bdev: fix race condition could cause dev exceed its upper limitation
vfs: avoid creation of inode number 0 in get_next_ino
namei: make set_root_rcu() return void
make simple_positive() public
ufs: use dir_pages instead of ufs_dir_pages()
pagemap.h: move dir_pages() over there
remove the pointless include of lglock.h
fs: cleanup slight list_entry abuse
xfs: Correctly lock inode when removing suid and file capabilities
fs: Call security_ops->inode_killpriv on truncate
fs: Provide function telling whether file_remove_privs() will do anything
...
Pull Ceph updates from Sage Weil:
"We have a pile of bug fixes from Ilya, including a few patches that
sync up the CRUSH code with the latest from userspace.
There is also a long series from Zheng that fixes various issues with
snapshots, inline data, and directory fsync, some simplification and
improvement in the cap release code, and a rework of the caching of
directory contents.
To top it off there are a few small fixes and cleanups from Benoit and
Hong"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (40 commits)
rbd: use GFP_NOIO in rbd_obj_request_create()
crush: fix a bug in tree bucket decode
libceph: Fix ceph_tcp_sendpage()'s more boolean usage
libceph: Remove spurious kunmap() of the zero page
rbd: queue_depth map option
rbd: store rbd_options in rbd_device
rbd: terminate rbd_opts_tokens with Opt_err
ceph: fix ceph_writepages_start()
rbd: bump queue_max_segments
ceph: rework dcache readdir
crush: sync up with userspace
crush: fix crash from invalid 'take' argument
ceph: switch some GFP_NOFS memory allocation to GFP_KERNEL
ceph: pre-allocate data structure that tracks caps flushing
ceph: re-send flushing caps (which are revoked) in reconnect stage
ceph: send TID of the oldest pending caps flush to MDS
ceph: track pending caps flushing globally
ceph: track pending caps flushing accurately
libceph: fix wrong name "Ceph filesystem for Linux"
ceph: fix directory fsync
...
Before a page get locked, someone else can write data to the page
and increase the i_size. So we should re-check the i_size after
pages are locked.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Previously our dcache readdir code relies on that child dentries in
directory dentry's d_subdir list are sorted by dentry's offset in
descending order. When adding dentries to the dcache, if a dentry
already exists, our readdir code moves it to head of directory
dentry's d_subdir list. This design relies on dcache internals.
Al Viro suggests using ncpfs's approach: keeping array of pointers
to dentries in page cache of directory inode. the validity of those
pointers are presented by directory inode's complete and ordered
flags. When a dentry gets pruned, we clear directory inode's complete
flag in the d_prune() callback. Before moving a dentry to other
directory, we clear the ordered flag for both old and new directory.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
GFP_NOFS memory allocation is required for page writeback path.
But there is no need to use GFP_NOFS in syscall path and readpage
path
Signed-off-by: Yan, Zheng <zyan@redhat.com>
if flushing caps were revoked, we should re-send the cap flush in
client reconnect stage. This guarantees that MDS processes the cap
flush message before issuing the flushing caps to other client.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
According to this information, MDS can trim its completed caps flush
list (which is used to detect duplicated cap flush).
Signed-off-by: Yan, Zheng <zyan@redhat.com>
So we know TID of the oldest pending caps flushing. Later patch will
send this information to MDS, so that MDS can trim its completed caps
flush list.
Tracking pending caps flushing globally also simplifies syncfs code.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Previously we do not trace accurate TID for flushing caps. when
MDS failovers, we have no choice but to re-send all flushing caps
with a new TID. This can cause problem because MDS can has already
flushed some caps and has issued the same caps to other client.
The re-sent cap flush has a new TID, which makes MDS unable to
detect if it has already processed the cap flush.
This patch adds code to track pending caps flushing accurately.
When re-sending cap flush is needed, we use its original flush
TID.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
fsync() on directory should flush dirty caps and wait for any
uncommitted directory opertions to commit. But ceph_dir_fsync()
only waits for uncommitted directory opertions.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Current ceph_fsync() only flushes dirty caps and wait for them to be
flushed. It doesn't wait for caps that has already been flushing.
This patch makes ceph_fsync() wait for pending flushing caps too.
Besides, this patch also makes caps_are_flushed() peroperly handle
tid wrapping.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
when copying files to cephfs, file data may stay in page cache after
corresponding file is closed. Cached data use Fc capability. If we
include Fc capability in cap_wanted, MDS will treat files with cached
data as open files, and journal them in an EOpen event when trimming
log segment.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
No need to bifurcate wait now that we've got ceph_timeout_jiffies().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
There are currently three libceph-level timeouts that the user can
specify on mount: mount_timeout, osd_idle_ttl and osdkeepalive. All of
these are in seconds and no checking is done on user input: negative
values are accepted, we multiply them all by HZ which may or may not
overflow, arbitrarily large jiffies then get added together, etc.
There is also a bug in the way mount_timeout=0 is handled. It's
supposed to mean "infinite timeout", but that's not how wait.h APIs
treat it and so __ceph_open_session() for example will busy loop
without much chance of being interrupted if none of ceph-mons are
there.
Fix all this by verifying user input, storing timeouts capped by
msecs_to_jiffies() in jiffies and using the new ceph_timeout_jiffies()
helper for all user-specified waits to handle infinite timeouts
correctly.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Previously we pre-allocate cap release messages for each caps. This
wastes lots of memory when there are large amount of caps. This patch
make the code not pre-allocate the cap release messages. Instead,
we add the corresponding ceph_cap struct to a list when releasing a
cap. Later when flush cap releases is needed, we allocate the cap
release messages dynamically.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
When ceph inode's i_head_snapc is NULL, __ceph_mark_dirty_caps()
accesses snap realm's cached_context. So we need take read lock
of snap_rwsem.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
when a snap notification contains no new snapshot, we can avoid
sending FLUSHSNAP message to MDS. But we still need to create
cap_snap in some case because it's required by write path and
page writeback path
Signed-off-by: Yan, Zheng <zyan@redhat.com>
In most cases that snap context is needed, we are holding
reference of CEPH_CAP_FILE_WR. So we can set ceph inode's
i_head_snapc when getting the CEPH_CAP_FILE_WR reference,
and make codes get snap context from i_head_snapc. This makes
the code simpler.
Another benefit of this change is that we can handle snap
notification more elegantly. Especially when snap context
is updated while someone else is doing write. The old queue
cap_snap code may set cap_snap's context to ether the old
context or the new snap context, depending on if i_head_snapc
is set. The new queue capp_snap code always set cap_snap's
context to the old snap context.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Cached_context in ceph_snap_realm is directly accessed by
uninline_data() and get_pool_perm(). This is racy in theory.
both uninline_data() and get_pool_perm() do not modify existing
object, they only create new object. So we can pass the empty
snap context to them. Unlike cached_context in ceph_snap_realm,
we do not need to protect the empty snap context.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
file_remove_suid() is a misnomer since it removes also file capabilities
stored in xattrs and sets S_NOSEC flag. Also should_remove_suid() tells
something else than whether file_remove_suid() call is necessary which
leads to bugs.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull fourth vfs update from Al Viro:
"d_inode() annotations from David Howells (sat in for-next since before
the beginning of merge window) + four assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RCU pathwalk breakage when running into a symlink overmounting something
fix I_DIO_WAKEUP definition
direct-io: only inc/dec inode->i_dio_count for file systems
fs/9p: fix readdir()
VFS: assorted d_backing_inode() annotations
VFS: fs/inode.c helpers: d_inode() annotations
VFS: fs/cachefiles: d_backing_inode() annotations
VFS: fs library helpers: d_inode() annotations
VFS: assorted weird filesystems: d_inode() annotations
VFS: normal filesystems (and lustre): d_inode() annotations
VFS: security/: d_inode() annotations
VFS: security/: d_backing_inode() annotations
VFS: net/: d_inode() annotations
VFS: net/unix: d_backing_inode() annotations
VFS: kernel/: d_inode() annotations
VFS: audit: d_backing_inode() annotations
VFS: Fix up some ->d_inode accesses in the chelsio driver
VFS: Cachefiles should perform fs modifications on the top layer only
VFS: AF_UNIX sockets should call mknod on the top layer only
Pull Ceph updates from Sage Weil:
"This time around we have a collection of CephFS fixes from Zheng
around MDS failure handling and snapshots, support for a new CRUSH
straw2 algorithm (to sync up with userspace) and several RBD cleanups
and fixes from Ilya, an error path leak fix from Taesoo, and then an
assorted collection of cleanups from others"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (28 commits)
rbd: rbd_wq comment is obsolete
libceph: announce support for straw2 buckets
crush: straw2 bucket type with an efficient 64-bit crush_ln()
crush: ensuring at most num-rep osds are selected
crush: drop unnecessary include from mapper.c
ceph: fix uninline data function
ceph: rename snapshot support
ceph: fix null pointer dereference in send_mds_reconnect()
ceph: hold on to exclusive caps on complete directories
libceph: simplify our debugfs attr macro
ceph: show non-default options only
libceph: expose client options through debugfs
libceph, ceph: split ceph_show_options()
rbd: mark block queue as non-rotational
libceph: don't overwrite specific con error msgs
ceph: cleanup unsafe requests when reconnecting is denied
ceph: don't zero i_wrbuffer_ref when reconnecting is denied
ceph: don't mark dirty caps when there is no auth cap
ceph: keep i_snap_realm while there are writers
libceph: osdmap.h: Add missing format newlines
...
If a directory is complete, we want to keep the exclusive
cap. So that MDS does not end up revoking the shared cap
on every create/unlink operation.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Don't pollute /proc/mounts with default options (presently these are
dcache, nofsc and acl). Leave the acl/noacl however - it's a bit of
a special case due to CONFIG_CEPH_FS_POSIX_ACL.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Split ceph_show_options() into two pieces and move the piece
responsible for printing client (libceph) options into net/ceph. This
way people adding a libceph option wouldn't have to remember to update
code in fs/ceph.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
remove_session_caps_cb() does not truncate dirty data in page
cache, but zeros i_wrbuffer_ref/i_wrbuffer_ref_head. This will
result negtive i_wrbuffer_ref/i_wrbuffer_ref_head
Signed-off-by: Yan, Zheng <zyan@redhat.com>
when reconnecting to MDS is denied, we remove session caps
forcibly. But it's possible there are ongoing write, the
write code needs to reference i_snap_realm. So if there are
ongoing write, we keep i_snap_realm.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Currently, there is no check for the kstrdup() for r_path2,
r_path1 and snapdir_name as various locations as there is a
possibility of failure during memory pressure. Therefore,
returning ENOMEM where the checks have been missed.
Signed-off-by: Sanidhya Kashyap <sanidhya.gatech@gmail.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
When ceph_update_writeable_page fails (including -EAGAIN), it
unlocks (w/ unlock_page) the page but does not 'release'
(w/ page_cache_release) properly.
Upon error, properly set *pagep to NULL, indicating an error.
Signed-off-by: Taesoo Kim <tsgatesv@gmail.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
return type of wait_for_completion_timeout is unsigned long not int. An
appropriately named unsigned long is added and the assignment fixed up.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
This is only an API consolidation and should make things more readable
it replaces var * HZ / 1000 by msecs_to_jiffies(var).
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
These cap releases are stale because MDS will re-establish client
caps according to the cap reconnect messages.
Note: MDS can detect stale cap messages, so these stale cap
releases are harmless even we don't drop them.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... returning -E... upon error and amount of data left in iter after
(possible) truncation upon success. Note, that normal case gives
a non-zero (positive) return value, so any tests for != 0 _must_ be
updated.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Conflicts:
fs/ext4/file.c
All places outside of core VFS that checked ->read and ->write for being NULL or
called the methods directly are gone now, so NULL {read,write} with non-NULL
{read,write}_iter will do the right thing in all cases.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
struct kiocb now is a generic I/O container, so move it to fs.h.
Also do a #include diet for aio.h while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
There is no need to pass the total request length in the kiocb, as
we already get passed in through the iov_iter argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull more vfs updates from Al Viro:
"Assorted stuff from this cycle. The big ones here are multilayer
overlayfs from Miklos and beginning of sorting ->d_inode accesses out
from David"
* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (51 commits)
autofs4 copy_dev_ioctl(): keep the value of ->size we'd used for allocation
procfs: fix race between symlink removals and traversals
debugfs: leave freeing a symlink body until inode eviction
Documentation/filesystems/Locking: ->get_sb() is long gone
trylock_super(): replacement for grab_super_passive()
fanotify: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions
Cachefiles: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions
VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry)
SELinux: Use d_is_positive() rather than testing dentry->d_inode
Smack: Use d_is_positive() rather than testing dentry->d_inode
TOMOYO: Use d_is_dir() rather than d_inode and S_ISDIR()
Apparmor: Use d_is_positive/negative() rather than testing dentry->d_inode
Apparmor: mediated_filesystem() should use dentry->d_sb not inode->i_sb
VFS: Split DCACHE_FILE_TYPE into regular and special types
VFS: Add a fallthrough flag for marking virtual dentries
VFS: Add a whiteout dentry type
VFS: Introduce inode-getting helpers for layered/unioned fs environments
Infiniband: Fix potential NULL d_inode dereference
posix_acl: fix reference leaks in posix_acl_create
autofs4: Wrong format for printing dentry
...
Convert the following where appropriate:
(1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry).
(2) S_ISREG(dentry->d_inode) to d_is_reg(dentry).
(3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more
complicated than it appears as some calls should be converted to
d_can_lookup() instead. The difference is whether the directory in
question is a real dir with a ->lookup op or whether it's a fake dir with
a ->d_automount op.
In some circumstances, we can subsume checks for dentry->d_inode not being
NULL into this, provided we the code isn't in a filesystem that expects
d_inode to be NULL if the dirent really *is* negative (ie. if we're going to
use d_inode() rather than d_backing_inode() to get the inode pointer).
Note that the dentry type field may be set to something other than
DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS
manages the fall-through from a negative dentry to a lower layer. In such a
case, the dentry type of the negative union dentry is set to the same as the
type of the lower dentry.
However, if you know d_inode is not NULL at the call site, then you can use
the d_is_xxx() functions even in a filesystem.
There is one further complication: a 0,0 chardev dentry may be labelled
DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was
intended for special directory entry types that don't have attached inodes.
The following perl+coccinelle script was used:
use strict;
my @callers;
open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') ||
die "Can't grep for S_ISDIR and co. callers";
@callers = <$fd>;
close($fd);
unless (@callers) {
print "No matches\n";
exit(0);
}
my @cocci = (
'@@',
'expression E;',
'@@',
'',
'- S_ISLNK(E->d_inode->i_mode)',
'+ d_is_symlink(E)',
'',
'@@',
'expression E;',
'@@',
'',
'- S_ISDIR(E->d_inode->i_mode)',
'+ d_is_dir(E)',
'',
'@@',
'expression E;',
'@@',
'',
'- S_ISREG(E->d_inode->i_mode)',
'+ d_is_reg(E)' );
my $coccifile = "tmp.sp.cocci";
open($fd, ">$coccifile") || die $coccifile;
print($fd "$_\n") || die $coccifile foreach (@cocci);
close($fd);
foreach my $file (@callers) {
chomp $file;
print "Processing ", $file, "\n";
system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 ||
die "spatch failed";
}
[AV: overlayfs parts skipped]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull Ceph changes from Sage Weil:
"On the RBD side, there is a conversion to blk-mq from Christoph,
several long-standing bug fixes from Ilya, and some cleanup from
Rickard Strandqvist.
On the CephFS side there is a long list of fixes from Zheng, including
improved session handling, a few IO path fixes, some dcache management
correctness fixes, and several blocking while !TASK_RUNNING fixes.
The core code gets a few cleanups and Chaitanya has added support for
TCP_NODELAY (which has been used on the server side for ages but we
somehow missed on the kernel client).
There is also an update to MAINTAINERS to fix up some email addresses
and reflect that Ilya and Zheng are doing most of the maintenance for
RBD and CephFS these days. Do not be surprised to see a pull request
come from one of them in the future if I am unavailable for some
reason"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (27 commits)
MAINTAINERS: update Ceph and RBD maintainers
libceph: kfree() in put_osd() shouldn't depend on authorizer
libceph: fix double __remove_osd() problem
rbd: convert to blk-mq
ceph: return error for traceless reply race
ceph: fix dentry leaks
ceph: re-send requests when MDS enters reconnecting stage
ceph: show nocephx_require_signatures and notcp_nodelay options
libceph: tcp_nodelay support
rbd: do not treat standalone as flatten
ceph: fix atomic_open snapdir
ceph: properly mark empty directory as complete
client: include kernel version in client metadata
ceph: provide seperate {inode,file}_operations for snapdir
ceph: fix request time stamp encoding
ceph: fix reading inline data when i_size > PAGE_SIZE
ceph: avoid block operation when !TASK_RUNNING (ceph_mdsc_close_sessions)
ceph: avoid block operation when !TASK_RUNNING (ceph_get_caps)
ceph: avoid block operation when !TASK_RUNNING (ceph_mdsc_sync)
rbd: fix error paths in rbd_dev_refresh()
...
When we receives traceless reply for request that created new inode,
we re-send a lookup request to MDS get information of the newly created
inode. (VFS expects FS' callback return an inode in create case)
This breaks one request into two requests. Other client may modify or
move to the new inode in the middle.
When the race happens, ceph_handle_notrace_create() unconditionally
links the dentry for 'create' operation to the inode returned by lookup.
This may confuse VFS when the inode is a directory (VFS does not allow
multiple linkages for directory inode).
This patch makes ceph_handle_notrace_create() when it detect a race.
This event should be rare and it happens only when we talk to old MDS.
Recent MDS does not send traceless reply for request that creates new
inode.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
So that MDS can check if any request is already completed and process
completed requests in clientreplay stage. When completed requests are
processed in clientreplay stage, MDS can avoid sending traceless
replies.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
ceph_add_cap() calls __check_cap_issue(), which clears directory
inode' complete flag. so we should set the complete flag for empty
directory should be set after calling ceph_add_cap().
Signed-off-by: Yan, Zheng <zyan@redhat.com>
struct timespec uses 'long' to present second and nanosecond. 'long'
is 64 bits on 64bits machine. ceph MDS expects time stamp to be
encoded as struct ceph_timespec, which uses 'u32' to present second
and nanosecond.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
when inode has inline data but its size > PAGE_SIZE (it was truncated
to larger size), previous direct read code return -EIO. This patch adds
code to return zeros for data whose offset > PAGE_SIZE.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
we should not do block operation in wait_event_interruptible()'s condition
check function, but reading inline data can block. so move the read inline
data code to ceph_get_caps()
Signed-off-by: Yan, Zheng <zyan@redhat.com>
check_cap_flush() calls mutex_lock(), which may block. So we can't
use it as condition check function for wait_event();
Signed-off-by: Yan, Zheng <zyan@redhat.com>
When snaprealm is created, its initial reference count is zero.
But in some rare cases, the newly created snaprealm is not referenced
by anyone. This causes snaprealm with zero reference count not freed.
The fix is set reference count of newly snaprealm to 1. The reference
is return the function who requests to create the snaprealm. When the
function finishes its job, it releases the reference.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
A bug is found in striped_read() of fs/ceph/file.c. striped_read() calls
ceph_zero_pape_vector_range(). The first argument, page_align + read + ret,
passed to ceph_zero_pape_vector_range() is wrong.
When a file has holes, this wrong parameter may cause memory corruption
either in kernal space or user space. Kernel space memory may be corrupted in
the case of non direct IO; user space memory may be corrupted in the case of
direct IO. In the latter case, the application doing direct IO may crash due
to memory corruption, as we have experienced.
The correct value should be initial_align + read + ret, where intial_align =
o_direct ? buf_align : io_align. Compared with page_align, the current page
offest, initial_align is the initial page offest, which should be used to
calculate the page and offset in ceph_zero_pape_vector_range().
Reported-by: caifeng zhu <zhucaifeng@unissoft-nj.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Remove the function ceph_get_cached_acl() that is not used anywhere.
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
This reverts commit 9bd0f45b70.
Linus rightly pointed out that I failed to initialize the counters
when adding them, so they don't work as expected. Just revert this
patch for now.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Pull backing device changes from Jens Axboe:
"This contains a cleanup of how the backing device is handled, in
preparation for a rework of the life time rules. In this part, the
most important change is to split the unrelated nommu mmap flags from
it, but also removing a backing_dev_info pointer from the
address_space (and inode), and a cleanup of other various minor bits.
Christoph did all the work here, I just fixed an oops with pages that
have a swap backing. Arnd fixed a missing export, and Oleg killed the
lustre backing_dev_info from staging. Last patch was from Al,
unexporting parts that are now no longer needed outside"
* 'for-3.20/bdi' of git://git.kernel.dk/linux-block:
Make super_blocks and sb_lock static
mtd: export new mtd_mmap_capabilities
fs: make inode_to_bdi() handle NULL inode
staging/lustre/llite: get rid of backing_dev_info
fs: remove default_backing_dev_info
fs: don't reassign dirty inodes to default_backing_dev_info
nfs: don't call bdi_unregister
ceph: remove call to bdi_unregister
fs: remove mapping->backing_dev_info
fs: export inode_to_bdi and use it in favor of mapping->backing_dev_info
nilfs2: set up s_bdi like the generic mount_bdev code
block_dev: get bdev inode bdi directly from the block device
block_dev: only write bdev inode on close
fs: introduce f_op->mmap_capabilities for nommu mmap support
fs: kill BDI_CAP_SWAP_BACKED
fs: deduplicate noop_backing_dev_info
Merge misc updates from Andrew Morton:
"Bite-sized chunks this time, to avoid the MTA ratelimiting woes.
- fs/notify updates
- ocfs2
- some of MM"
That laconic "some MM" is mainly the removal of remap_file_pages(),
which is a big simplification of the VM, and which gets rid of a *lot*
of random cruft and special cases because we no longer support the
non-linear mappings that it used.
From a user interface perspective, nothing has changed, because the
remap_file_pages() syscall still exists, it's just done by emulating the
old behavior by creating a lot of individual small mappings instead of
one non-linear one.
The emulation is slower than the old "native" non-linear mappings, but
nobody really uses or cares about remap_file_pages(), and simplifying
the VM is a big advantage.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (78 commits)
memcg: zap memcg_slab_caches and memcg_slab_mutex
memcg: zap memcg_name argument of memcg_create_kmem_cache
memcg: zap __memcg_{charge,uncharge}_slab
mm/page_alloc.c: place zone_id check before VM_BUG_ON_PAGE check
mm: hugetlb: fix type of hugetlb_treat_as_movable variable
mm, hugetlb: remove unnecessary lower bound on sysctl handlers"?
mm: memory: merge shared-writable dirtying branches in do_wp_page()
mm: memory: remove ->vm_file check on shared writable vmas
xtensa: drop _PAGE_FILE and pte_file()-related helpers
x86: drop _PAGE_FILE and pte_file()-related helpers
unicore32: drop pte_file()-related helpers
um: drop _PAGE_FILE and pte_file()-related helpers
tile: drop pte_file()-related helpers
sparc: drop pte_file()-related helpers
sh: drop _PAGE_FILE and pte_file()-related helpers
score: drop _PAGE_FILE and pte_file()-related helpers
s390: drop pte_file()-related helpers
parisc: drop _PAGE_FILE and pte_file()-related helpers
openrisc: drop _PAGE_FILE and pte_file()-related helpers
nios2: drop _PAGE_FILE and pte_file()-related helpers
...
Now that default_backing_dev_info is not used for writeback purposes we can
git rid of it easily:
- instead of using it's name for tracing unregistered bdi we just use
"unknown"
- btrfs and ceph can just assign the default read ahead window themselves
like several other filesystems already do.
- we can assign noop_backing_dev_info as the default one in alloc_super.
All filesystems already either assigned their own or
noop_backing_dev_info.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
bdi_destroy already does all the work, and if we delay freeing the
anon bdev we can get away with just that single call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Now that we never use the backing_dev_info pointer in struct address_space
we can simply remove it and save 4 to 8 bytes in every inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
