2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-29 23:53:55 +08:00
Commit Graph

83 Commits

Author SHA1 Message Date
Gerd Hoffmann
ca8a5bd282 add missing accounting calls to compat_sys_{readv,writev}
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jay Lan <jlan@engr.sgi.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:13 -08:00
David Howells
a6f76f23d2 CRED: Make execve() take advantage of copy-on-write credentials
Make execve() take advantage of copy-on-write credentials, allowing it to set
up the credentials in advance, and then commit the whole lot after the point
of no return.

This patch and the preceding patches have been tested with the LTP SELinux
testsuite.

This patch makes several logical sets of alteration:

 (1) execve().

     The credential bits from struct linux_binprm are, for the most part,
     replaced with a single credentials pointer (bprm->cred).  This means that
     all the creds can be calculated in advance and then applied at the point
     of no return with no possibility of failure.

     I would like to replace bprm->cap_effective with:

	cap_isclear(bprm->cap_effective)

     but this seems impossible due to special behaviour for processes of pid 1
     (they always retain their parent's capability masks where normally they'd
     be changed - see cap_bprm_set_creds()).

     The following sequence of events now happens:

     (a) At the start of do_execve, the current task's cred_exec_mutex is
     	 locked to prevent PTRACE_ATTACH from obsoleting the calculation of
     	 creds that we make.

     (a) prepare_exec_creds() is then called to make a copy of the current
     	 task's credentials and prepare it.  This copy is then assigned to
     	 bprm->cred.

  	 This renders security_bprm_alloc() and security_bprm_free()
     	 unnecessary, and so they've been removed.

     (b) The determination of unsafe execution is now performed immediately
     	 after (a) rather than later on in the code.  The result is stored in
     	 bprm->unsafe for future reference.

     (c) prepare_binprm() is called, possibly multiple times.

     	 (i) This applies the result of set[ug]id binaries to the new creds
     	     attached to bprm->cred.  Personality bit clearance is recorded,
     	     but now deferred on the basis that the exec procedure may yet
     	     fail.

         (ii) This then calls the new security_bprm_set_creds().  This should
	     calculate the new LSM and capability credentials into *bprm->cred.

	     This folds together security_bprm_set() and parts of
	     security_bprm_apply_creds() (these two have been removed).
	     Anything that might fail must be done at this point.

         (iii) bprm->cred_prepared is set to 1.

	     bprm->cred_prepared is 0 on the first pass of the security
	     calculations, and 1 on all subsequent passes.  This allows SELinux
	     in (ii) to base its calculations only on the initial script and
	     not on the interpreter.

     (d) flush_old_exec() is called to commit the task to execution.  This
     	 performs the following steps with regard to credentials:

	 (i) Clear pdeath_signal and set dumpable on certain circumstances that
	     may not be covered by commit_creds().

         (ii) Clear any bits in current->personality that were deferred from
             (c.i).

     (e) install_exec_creds() [compute_creds() as was] is called to install the
     	 new credentials.  This performs the following steps with regard to
     	 credentials:

         (i) Calls security_bprm_committing_creds() to apply any security
             requirements, such as flushing unauthorised files in SELinux, that
             must be done before the credentials are changed.

	     This is made up of bits of security_bprm_apply_creds() and
	     security_bprm_post_apply_creds(), both of which have been removed.
	     This function is not allowed to fail; anything that might fail
	     must have been done in (c.ii).

         (ii) Calls commit_creds() to apply the new credentials in a single
             assignment (more or less).  Possibly pdeath_signal and dumpable
             should be part of struct creds.

	 (iii) Unlocks the task's cred_replace_mutex, thus allowing
	     PTRACE_ATTACH to take place.

         (iv) Clears The bprm->cred pointer as the credentials it was holding
             are now immutable.

         (v) Calls security_bprm_committed_creds() to apply any security
             alterations that must be done after the creds have been changed.
             SELinux uses this to flush signals and signal handlers.

     (f) If an error occurs before (d.i), bprm_free() will call abort_creds()
     	 to destroy the proposed new credentials and will then unlock
     	 cred_replace_mutex.  No changes to the credentials will have been
     	 made.

 (2) LSM interface.

     A number of functions have been changed, added or removed:

     (*) security_bprm_alloc(), ->bprm_alloc_security()
     (*) security_bprm_free(), ->bprm_free_security()

     	 Removed in favour of preparing new credentials and modifying those.

     (*) security_bprm_apply_creds(), ->bprm_apply_creds()
     (*) security_bprm_post_apply_creds(), ->bprm_post_apply_creds()

     	 Removed; split between security_bprm_set_creds(),
     	 security_bprm_committing_creds() and security_bprm_committed_creds().

     (*) security_bprm_set(), ->bprm_set_security()

     	 Removed; folded into security_bprm_set_creds().

     (*) security_bprm_set_creds(), ->bprm_set_creds()

     	 New.  The new credentials in bprm->creds should be checked and set up
     	 as appropriate.  bprm->cred_prepared is 0 on the first call, 1 on the
     	 second and subsequent calls.

     (*) security_bprm_committing_creds(), ->bprm_committing_creds()
     (*) security_bprm_committed_creds(), ->bprm_committed_creds()

     	 New.  Apply the security effects of the new credentials.  This
     	 includes closing unauthorised files in SELinux.  This function may not
     	 fail.  When the former is called, the creds haven't yet been applied
     	 to the process; when the latter is called, they have.

 	 The former may access bprm->cred, the latter may not.

 (3) SELinux.

     SELinux has a number of changes, in addition to those to support the LSM
     interface changes mentioned above:

     (a) The bprm_security_struct struct has been removed in favour of using
     	 the credentials-under-construction approach.

     (c) flush_unauthorized_files() now takes a cred pointer and passes it on
     	 to inode_has_perm(), file_has_perm() and dentry_open().

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:24 +11:00
Arjan van de Ven
4d36a9e65d select: deal with math overflow from borderline valid userland data
Some userland apps seem to pass in a "0" for the seconds, and several
seconds worth of usecs to select().  The old kernels accepted this just
fine, so the new kernels must too.

However, due to the upscaling of the microseconds to nanoseconds we had
some cases where we got math overflow, and depending on the GCC version
(due to inlining decisions) that actually resulted in an -EINVAL return.

This patch fixes this by adding the excess microseconds to the seconds
field.

Also with thanks to Marcin Slusarz for spotting some implementation bugs
in the diagnostics patches.

Reported-by: Carlos R. Mafra <crmafra2@gmail.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-26 11:22:08 -07:00
Linus Torvalds
1f6d6e8ebe Merge branch 'v28-range-hrtimers-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'v28-range-hrtimers-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (37 commits)
  hrtimers: add missing docbook comments to struct hrtimer
  hrtimers: simplify hrtimer_peek_ahead_timers()
  hrtimers: fix docbook comments
  DECLARE_PER_CPU needs linux/percpu.h
  hrtimers: fix typo
  rangetimers: fix the bug reported by Ingo for real
  rangetimer: fix BUG_ON reported by Ingo
  rangetimer: fix x86 build failure for the !HRTIMERS case
  select: fix alpha OSF wrapper
  select: fix alpha OSF wrapper
  hrtimer: peek at the timer queue just before going idle
  hrtimer: make the futex() system call use the per process slack value
  hrtimer: make the nanosleep() syscall use the per process slack
  hrtimer: fix signed/unsigned bug in slack estimator
  hrtimer: show the timer ranges in /proc/timer_list
  hrtimer: incorporate feedback from Peter Zijlstra
  hrtimer: add a hrtimer_start_range() function
  hrtimer: another build fix
  hrtimer: fix build bug found by Ingo
  hrtimer: make select() and poll() use the hrtimer range feature
  ...
2008-10-23 10:53:02 -07:00
Al Viro
53c9c5c0e3 [PATCH] prepare vfs_readdir() callers to returning filldir result
It's not the final state, but it allows moving ->readdir() instances
to passing filldir return value to caller of vfs_readdir().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-23 05:13:10 -04:00
Arjan van de Ven
651dab4264 Merge commit 'linus/master' into merge-linus
Conflicts:

	arch/x86/kvm/i8254.c
2008-10-17 09:20:26 -07:00
Christoph Hellwig
f7a5000f7a compat: move cp_compat_stat to common code
struct stat / compat_stat is the same on all architectures, so
cp_compat_stat should be, too.

Turns out it is, except that various architectures have slightly and some
high2lowuid/high2lowgid or the direct assignment instead of the
SET_UID/SET_GID that expands to the correct one anyway.

This patch replaces the arch-specific cp_compat_stat implementations with
a common one based on the x86-64 one.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David S. Miller <davem@davemloft.net> [ sparc bits ]
Acked-by: Kyle McMartin <kyle@mcmartin.ca> [ parisc bits ]
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:33 -07:00
Jason Baron
362e6663ef exec.c, compat.c: fix count(), compat_count() bounds checking
With MAX_ARG_STRINGS set to 0x7FFFFFFF, and being passed to 'count()' and
compat_count(), it would appear that the current max bounds check of
fs/exec.c:394:

	if(++i > max)
		return -E2BIG;

would never trigger. Since 'i' is of type int, so values would wrap and the
function would continue looping.

Simple fix seems to be chaning ++i to i++ and checking for '>='.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "Ollie Wild" <aaw@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:32 -07:00
Arjan van de Ven
8ff3e8e85f select: switch select() and poll() over to hrtimers
With lots of help, input and cleanups from Thomas Gleixner

This patch switches select() and poll() over to hrtimers.

The core of the patch is replacing the "s64 timeout" with a
"struct timespec end_time" in all the plumbing.

But most of the diffstat comes from using the just introduced helpers:
	poll_select_set_timeout
	poll_select_copy_remaining
	timespec_add_safe
which make manipulating the timespec easier and less error-prone.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-05 21:35:03 -07:00
Thomas Gleixner
b773ad40ac select: add poll_select_set_timeout() and poll_select_copy_remaining() helpers
This patch adds 2 helpers that will be used for the hrtimer based select/poll:

poll_select_set_timeout() is a helper that takes a timeout (as a second, nanosecond
pair) and turns that into a "struct timespec" that represents the absolute end time.
This is a common operation in the many select() and poll() variants and needs various,
common, sanity checks.

poll_select_copy_remaining() is a helper that takes care of copying the remaining
time to userspace, as select(), pselect() and ppoll() do. This function comes in
both a natural and a compat implementation (due to datastructure differences).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-09-05 21:34:59 -07:00
Al Viro
8f3f655da7 [PATCH] fix regular readdir() and friends
Handling of -EOVERFLOW.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-08-25 01:18:08 -04:00
Al Viro
2d8f30380a [PATCH] sanitize __user_walk_fd() et.al.
* do not pass nameidata; struct path is all the callers want.
* switch to new helpers:
	user_path_at(dfd, pathname, flags, &path)
	user_path(pathname, &path)
	user_lpath(pathname, &path)
	user_path_dir(pathname, &path)  (fail if not a directory)
  The last 3 are trivial macro wrappers for the first one.
* remove nameidata in callers.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-26 20:53:34 -04:00
Ulrich Drepper
9deb27baed flag parameters: signalfd
This patch adds the new signalfd4 syscall.  It extends the old signalfd
syscall by one parameter which is meant to hold a flag value.  In this
patch the only flag support is SFD_CLOEXEC which causes the close-on-exec
flag for the returned file descriptor to be set.

A new name SFD_CLOEXEC is introduced which in this implementation must
have the same value as O_CLOEXEC.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <signal.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_signalfd4
# ifdef __x86_64__
#  define __NR_signalfd4 289
# elif defined __i386__
#  define __NR_signalfd4 327
# else
#  error "need __NR_signalfd4"
# endif
#endif

#define SFD_CLOEXEC O_CLOEXEC

int
main (void)
{
  sigset_t ss;
  sigemptyset (&ss);
  sigaddset (&ss, SIGUSR1);
  int fd = syscall (__NR_signalfd4, -1, &ss, 8, 0);
  if (fd == -1)
    {
      puts ("signalfd4(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("signalfd4(0) set close-on-exec flag");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_signalfd4, -1, &ss, 8, SFD_CLOEXEC);
  if (fd == -1)
    {
      puts ("signalfd4(SFD_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("signalfd4(SFD_CLOEXEC) does not set close-on-exec flag");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[akpm@linux-foundation.org: add sys_ni stub]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:27 -07:00
Jon Tollefson
f4a67cceee fs: check for statfs overflow
Adds a check for an overflow in the filesystem size so if someone is
checking with statfs() on a 16G blocksize hugetlbfs in a 32bit binary that
it will report back EOVERFLOW instead of a size of 0.

Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Jon Tollefson <kniht@linux.vnet.ibm.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:19 -07:00
Al Viro
08a6fac1c6 [PATCH] get rid of leak in compat_execve()
Even though copy_compat_strings() doesn't cache the pages,
copy_strings_kernel() and stuff indirectly called by e.g.
->load_binary() is doing that, so we need to drop the
cache contents in the end.

[found by WANG Cong <wangcong@zeuux.org>]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-05-16 17:23:05 -04:00
Al Viro
9f3acc3140 [PATCH] split linux/file.h
Initial splitoff of the low-level stuff; taken to fdtable.h

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-05-01 13:08:16 -04:00
Roland McGrath
f3de272b82 signals: use HAVE_SET_RESTORE_SIGMASK
Change all the #ifdef TIF_RESTORE_SIGMASK conditionals in non-arch code to
#ifdef HAVE_SET_RESTORE_SIGMASK.  If arch code defines it first, the generic
set_restore_sigmask() using TIF_RESTORE_SIGMASK is not defined.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:37 -07:00
Roland McGrath
4e4c22c711 signals: add set_restore_sigmask
This adds the set_restore_sigmask() inline in <linux/thread_info.h> and
replaces every set_thread_flag(TIF_RESTORE_SIGMASK) with a call to it.  No
change, but abstracts the details of the flag protocol from all the calls.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:37 -07:00
Trond Myklebust
52833e897f Merge branch 'linus_origin' into hotfixes 2008-02-15 13:36:30 -05:00
Jan Blunck
1d957f9bf8 Introduce path_put()
* Add path_put() functions for releasing a reference to the dentry and
  vfsmount of a struct path in the right order

* Switch from path_release(nd) to path_put(&nd->path)

* Rename dput_path() to path_put_conditional()

[akpm@linux-foundation.org: fix cifs]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: <linux-fsdevel@vger.kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14 21:13:33 -08:00
Jan Blunck
4ac9137858 Embed a struct path into struct nameidata instead of nd->{dentry,mnt}
This is the central patch of a cleanup series. In most cases there is no good
reason why someone would want to use a dentry for itself. This series reflects
that fact and embeds a struct path into nameidata.

Together with the other patches of this series
- it enforced the correct order of getting/releasing the reference count on
  <dentry,vfsmount> pairs
- it prepares the VFS for stacking support since it is essential to have a
  struct path in every place where the stack can be traversed
- it reduces the overall code size:

without patch series:
   text    data     bss     dec     hex filename
5321639  858418  715768 6895825  6938d1 vmlinux

with patch series:
   text    data     bss     dec     hex filename
5320026  858418  715768 6894212  693284 vmlinux

This patch:

Switch from nd->{dentry,mnt} to nd->path.{dentry,mnt} everywhere.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix cifs]
[akpm@linux-foundation.org: fix smack]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14 21:13:33 -08:00
Chuck Lever
4267c9561d NFS: Allow text-based mounts via compat_sys_mount
The compat_sys_mount() system call throws EINVAL for text-based NFSv4
mounts.

The text-based mount interface assumes that any mount option blob that
doesn't set the version field to "1" is a C string (ie not a legacy
mount request).  The compat_sys_mount() call treats blobs that don't
set the version field to "1" as an error.  We just relax the check in
compat_sys_mount() a bit to allow C strings to be passed down to the NFSv4
client.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-02-13 23:24:05 -05:00
Jiri Olsa
0321155926 fs: remove dead config CONFIG_HAS_COMPAT_EPOLL_EVENT symbol
Remove dead config CONFIG_HAS_COMPAT_EPOLL_EVENT symbol.

Signed-off-by: Jiri Olsa <olsajiri@gmail.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:03 -08:00
Davide Libenzi
4d672e7ac7 timerfd: new timerfd API
This is the new timerfd API as it is implemented by the following patch:

int timerfd_create(int clockid, int flags);
int timerfd_settime(int ufd, int flags,
		    const struct itimerspec *utmr,
		    struct itimerspec *otmr);
int timerfd_gettime(int ufd, struct itimerspec *otmr);

The timerfd_create() API creates an un-programmed timerfd fd.  The "clockid"
parameter can be either CLOCK_MONOTONIC or CLOCK_REALTIME.

The timerfd_settime() API give new settings by the timerfd fd, by optionally
retrieving the previous expiration time (in case the "otmr" parameter is not
NULL).

The time value specified in "utmr" is absolute, if the TFD_TIMER_ABSTIME bit
is set in the "flags" parameter.  Otherwise it's a relative time.

The timerfd_gettime() API returns the next expiration time of the timer, or
{0, 0} if the timerfd has not been set yet.

Like the previous timerfd API implementation, read(2) and poll(2) are
supported (with the same interface).  Here's a simple test program I used to
exercise the new timerfd APIs:

http://www.xmailserver.org/timerfd-test2.c

[akpm@linux-foundation.org: coding-style cleanups]
[akpm@linux-foundation.org: fix ia64 build]
[akpm@linux-foundation.org: fix m68k build]
[akpm@linux-foundation.org: fix mips build]
[akpm@linux-foundation.org: fix alpha, arm, blackfin, cris, m68k, s390, sparc and sparc64 builds]
[heiko.carstens@de.ibm.com: fix s390]
[akpm@linux-foundation.org: fix powerpc build]
[akpm@linux-foundation.org: fix sparc64 more]
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:07 -08:00
James Morris
c43e259cc7 security: call security_file_permission from rw_verify_area
All instances of rw_verify_area() are followed by a call to
security_file_permission(), so just call the latter from the former.

Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-01-25 11:29:52 +11:00
Ollie Wild
b6a2fea393 mm: variable length argument support
Remove the arg+env limit of MAX_ARG_PAGES by copying the strings directly from
the old mm into the new mm.

We create the new mm before the binfmt code runs, and place the new stack at
the very top of the address space.  Once the binfmt code runs and figures out
where the stack should be, we move it downwards.

It is a bit peculiar in that we have one task with two mm's, one of which is
inactive.

[a.p.zijlstra@chello.nl: limit stack size]
Signed-off-by: Ollie Wild <aaw@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <linux-arch@vger.kernel.org>
Cc: Hugh Dickins <hugh@veritas.com>
[bunk@stusta.de: unexport bprm_mm_init]
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:45 -07:00
Badari Pulavarty
6087b2dab2 optimize compat_core_sys_select() by a using stack space for small fd sets
Optimize select by a using stack space for small fd sets.
core_sys_select() already has this optimization.  This is for compat
version.

Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-23 20:14:12 -07:00
Heiko Carstens
8317f14b60 simplify compat_sys_timerfd
Just thought this is easier to read.

Acked-by: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-17 05:23:04 -07:00
Davide Libenzi
83f5d12669 signal/timer/event: timerfd compat code
This patch implements the necessary compat code for the timerfd system call.

Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 08:29:36 -07:00
Davide Libenzi
6d18c92209 signal/timer/event: signalfd compat code
This patch implements the necessary compat code for the signalfd system call.

Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 08:29:36 -07:00
Ulrich Drepper
1c710c896e utimensat implementation
Implement utimensat(2) which is an extension to futimesat(2) in that it

a) supports nano-second resolution for the timestamps
b) allows to selectively ignore the atime/mtime value
c) allows to selectively use the current time for either atime or mtime
d) supports changing the atime/mtime of a symlink itself along the lines
   of the BSD lutimes(3) functions

For this change the internally used do_utimes() functions was changed to
accept a timespec time value and an additional flags parameter.

Additionally the sys_utime function was changed to match compat_sys_utime
which already use do_utimes instead of duplicating the work.

Also, the completely missing futimensat() functionality is added.  We have
such a function in glibc but we have to resort to using /proc/self/fd/* which
not everybody likes (chroot etc).

Test application (the syscall number will need per-arch editing):

#include <errno.h>
#include <fcntl.h>
#include <time.h>
#include <sys/time.h>
#include <stddef.h>
#include <syscall.h>

#define __NR_utimensat 280

#define UTIME_NOW       ((1l << 30) - 1l)
#define UTIME_OMIT      ((1l << 30) - 2l)

int
main(void)
{
  int status = 0;

  int fd = open("ttt", O_RDWR|O_CREAT|O_EXCL, 0666);
  if (fd == -1)
    error (1, errno, "failed to create test file \"ttt\"");

  struct stat64 st1;
  if (fstat64 (fd, &st1) != 0)
    error (1, errno, "fstat failed");

  struct timespec t[2];
  t[0].tv_sec = 0;
  t[0].tv_nsec = 0;
  t[1].tv_sec = 0;
  t[1].tv_nsec = 0;
  if (syscall(__NR_utimensat, AT_FDCWD, "ttt", t, 0) != 0)
    error (1, errno, "utimensat failed");

  struct stat64 st2;
  if (fstat64 (fd, &st2) != 0)
    error (1, errno, "fstat failed");

  if (st2.st_atim.tv_sec != 0 || st2.st_atim.tv_nsec != 0)
    {
      puts ("atim not reset to zero");
      status = 1;
    }
  if (st2.st_mtim.tv_sec != 0 || st2.st_mtim.tv_nsec != 0)
    {
      puts ("mtim not reset to zero");
      status = 1;
    }
  if (status != 0)
    goto out;

  t[0] = st1.st_atim;
  t[1].tv_sec = 0;
  t[1].tv_nsec = UTIME_OMIT;
  if (syscall(__NR_utimensat, AT_FDCWD, "ttt", t, 0) != 0)
    error (1, errno, "utimensat failed");

  if (fstat64 (fd, &st2) != 0)
    error (1, errno, "fstat failed");

  if (st2.st_atim.tv_sec != st1.st_atim.tv_sec
      || st2.st_atim.tv_nsec != st1.st_atim.tv_nsec)
    {
      puts ("atim not set");
      status = 1;
    }
  if (st2.st_mtim.tv_sec != 0 || st2.st_mtim.tv_nsec != 0)
    {
      puts ("mtim changed from zero");
      status = 1;
    }
  if (status != 0)
    goto out;

  t[0].tv_sec = 0;
  t[0].tv_nsec = UTIME_OMIT;
  t[1] = st1.st_mtim;
  if (syscall(__NR_utimensat, AT_FDCWD, "ttt", t, 0) != 0)
    error (1, errno, "utimensat failed");

  if (fstat64 (fd, &st2) != 0)
    error (1, errno, "fstat failed");

  if (st2.st_atim.tv_sec != st1.st_atim.tv_sec
      || st2.st_atim.tv_nsec != st1.st_atim.tv_nsec)
    {
      puts ("mtim changed from original time");
      status = 1;
    }
  if (st2.st_mtim.tv_sec != st1.st_mtim.tv_sec
      || st2.st_mtim.tv_nsec != st1.st_mtim.tv_nsec)
    {
      puts ("mtim not set");
      status = 1;
    }
  if (status != 0)
    goto out;

  sleep (2);

  t[0].tv_sec = 0;
  t[0].tv_nsec = UTIME_NOW;
  t[1].tv_sec = 0;
  t[1].tv_nsec = UTIME_NOW;
  if (syscall(__NR_utimensat, AT_FDCWD, "ttt", t, 0) != 0)
    error (1, errno, "utimensat failed");

  if (fstat64 (fd, &st2) != 0)
    error (1, errno, "fstat failed");

  struct timeval tv;
  gettimeofday(&tv,NULL);

  if (st2.st_atim.tv_sec <= st1.st_atim.tv_sec
      || st2.st_atim.tv_sec > tv.tv_sec)
    {
      puts ("atim not set to NOW");
      status = 1;
    }
  if (st2.st_mtim.tv_sec <= st1.st_mtim.tv_sec
      || st2.st_mtim.tv_sec > tv.tv_sec)
    {
      puts ("mtim not set to NOW");
      status = 1;
    }

  if (symlink ("ttt", "tttsym") != 0)
    error (1, errno, "cannot create symlink");

  t[0].tv_sec = 0;
  t[0].tv_nsec = 0;
  t[1].tv_sec = 0;
  t[1].tv_nsec = 0;
  if (syscall(__NR_utimensat, AT_FDCWD, "tttsym", t, AT_SYMLINK_NOFOLLOW) != 0)
    error (1, errno, "utimensat failed");

  if (lstat64 ("tttsym", &st2) != 0)
    error (1, errno, "lstat failed");

  if (st2.st_atim.tv_sec != 0 || st2.st_atim.tv_nsec != 0)
    {
      puts ("symlink atim not reset to zero");
      status = 1;
    }
  if (st2.st_mtim.tv_sec != 0 || st2.st_mtim.tv_nsec != 0)
    {
      puts ("symlink mtim not reset to zero");
      status = 1;
    }
  if (status != 0)
    goto out;

  t[0].tv_sec = 1;
  t[0].tv_nsec = 0;
  t[1].tv_sec = 1;
  t[1].tv_nsec = 0;
  if (syscall(__NR_utimensat, fd, NULL, t, 0) != 0)
    error (1, errno, "utimensat failed");

  if (fstat64 (fd, &st2) != 0)
    error (1, errno, "fstat failed");

  if (st2.st_atim.tv_sec != 1 || st2.st_atim.tv_nsec != 0)
    {
      puts ("atim not reset to one");
      status = 1;
    }
  if (st2.st_mtim.tv_sec != 1 || st2.st_mtim.tv_nsec != 0)
    {
      puts ("mtim not reset to one");
      status = 1;
    }

  if (status == 0)
     puts ("all OK");

 out:
  close (fd);
  unlink ("ttt");
  unlink ("tttsym");

  return status;
}

[akpm@linux-foundation.org: add missing i386 syscall table entry]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Cc: Alexey Dobriyan <adobriyan@openvz.org>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:18 -07:00
Christoph Hellwig
6272e26679 cleanup compat ioctl handling
Merge all compat ioctl handling into compat_ioctl.c instead of splitting it
over compat.c and compat_ioctl.c.  This also allows to get rid of ioctl32.h

Signed-off-by: Christoph Hellwig <hch@lst.de>
Looks-good-to: Andi Kleen <ak@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:09 -07:00
Milind Arun Choudhary
022a169244 ROUND_UP macro cleanup in fs/(select|compat|readdir).c
ROUND_UP macro cleanup use,ALIGN or DIV_ROUND_UP where ever appropriate.

Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:09 -07:00
Andi Kleen
a106009bdf [PATCH] x86-64: Print type and size correctly for unknown compat ioctls
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:21 +02:00
Davide Libenzi
f6dfb4fd7d [PATCH] Add epoll compat_ code to fs/compat.c
IA64 and ARM-OABI are currently using their own version of epoll compat_
code.

An architecture needs epoll_event translation if alignof(u64) in 32 bit
mode is different from alignof(u64) in 64 bit mode.  If an architecture
needs epoll_event translation, it must define struct compat_epoll_event in
asm/compat.h and set CONFIG_HAVE_COMPAT_EPOLL_EVENT and use
compat_sys_epoll_ctl and compat_sys_epoll_wait.

All 64 bit architecture should use compat_sys_epoll_pwait.

[sfr: restructure and move to fs/compat.c, remove MIPS version
of compat_sys_epoll_pwait, use __put_user_unaligned]

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-08 07:38:22 -08:00
Vadim Lobanov
bbea9f6966 [PATCH] fdtable: Make fdarray and fdsets equal in size
Currently, each fdtable supports three dynamically-sized arrays of data: the
fdarray and two fdsets.  The code allows the number of fds supported by the
fdarray (fdtable->max_fds) to differ from the number of fds supported by each
of the fdsets (fdtable->max_fdset).

In practice, it is wasteful for these two sizes to differ: whenever we hit a
limit on the smaller-capacity structure, we will reallocate the entire fdtable
and all the dynamic arrays within it, so any delta in the memory used by the
larger-capacity structure will never be touched at all.

Rather than hogging this excess, we shouldn't even allocate it in the first
place, and keep the capacities of the fdarray and the fdsets equal.  This
patch removes fdtable->max_fdset.  As an added bonus, most of the supporting
code becomes simpler.

Signed-off-by: Vadim Lobanov <vlobanov@speakeasy.net>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:57:22 -08:00
Josef "Jeff" Sipek
0f7fc9e4d0 [PATCH] VFS: change struct file to use struct path
This patch changes struct file to use struct path instead of having
independent pointers to struct dentry and struct vfsmount, and converts all
users of f_{dentry,vfsmnt} in fs/ to use f_path.{dentry,mnt}.

Additionally, it adds two #define's to make the transition easier for users of
the f_dentry and f_vfsmnt.

Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:41 -08:00
Heiko Carstens
7116e994b4 [PATCH] compat: fix uaccess handling
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:33 -08:00
Andrey Mirkin
822191a2fa [PATCH] skip data conversion in compat_sys_mount when data_page is NULL
OpenVZ Linux kernel team has found a problem with mounting in compat mode.

Simple command "mount -t smbfs ..." on Fedora Core 5 distro in 32-bit mode
leads to oops:

  Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: compat_sys_mount+0xd6/0x290
  Process mount (pid: 14656, veid=300, threadinfo ffff810034d30000, task ffff810034c86bc0)
  Call Trace: ia32_sysret+0x0/0xa

The problem is that data_page pointer can be NULL, so we should skip data
conversion in this case.

Signed-off-by: Andrey Mirkin <amirkin@openvz.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:20 -08:00
Al Viro
bd01f843c3 [PATCH] severing skbuff.h -> poll.h
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-12-04 02:00:31 -05:00
Al Viro
a1f8e7f7fb [PATCH] severing skbuff.h -> highmem.h
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-12-04 02:00:29 -05:00
Heiko Carstens
87c2b7c045 [PATCH] sys_pselect7 vs compat_sys_pselect7 uaccess error handling
758333458a fixes the not checked copy_to_user
return value of compat_sys_pselect7.  I ran into this too because of an old
source tree, but my fix would look quite a bit different to Andi's fix.

The reason is that the compat function IMHO should behave the very same as
the non-compat function if possible.  Since sys_pselect7 does not return
-EFAULT in this specific case, change the compat code so it behaves like
sys_pselect7.

Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-03 12:27:55 -08:00
Al Viro
90cbad6591 [PATCH] more fs/compat.c __user annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-10 15:37:20 -07:00
David Howells
afefdbb28a [PATCH] VFS: Make filldir_t and struct kstat deal in 64-bit inode numbers
These patches make the kernel pass 64-bit inode numbers internally when
communicating to userspace, even on a 32-bit system.  They are required
because some filesystems have intrinsic 64-bit inode numbers: NFS3+ and XFS
for example.  The 64-bit inode numbers are then propagated to userspace
automatically where the arch supports it.

Problems have been seen with userspace (eg: ld.so) using the 64-bit inode
number returned by stat64() or getdents64() to differentiate files, and
failing because the 64-bit inode number space was compressed to 32-bits, and
so overlaps occur.

This patch:

Make filldir_t take a 64-bit inode number and struct kstat carry a 64-bit
inode number so that 64-bit inode numbers can be passed back to userspace.

The stat functions then returns the full 64-bit inode number where
available and where possible.  If it is not possible to represent the inode
number supplied by the filesystem in the field provided by userspace, then
error EOVERFLOW will be issued.

Similarly, the getdents/readdir functions now pass the full 64-bit inode
number to userspace where possible, returning EOVERFLOW instead when a
directory entry is encountered that can't be properly represented.

Note that this means that some inodes will not be stat'able on a 32-bit
system with old libraries where they were before - but it does mean that
there will be no ambiguity over what a 32-bit inode number refers to.

Note similarly that directory scans may be cut short with an error on a
32-bit system with old libraries where the scan would work before for the
same reasons.

It is judged unlikely that this situation will occur because modern glibc
uses 64-bit capable versions of stat and getdents class functions
exclusively, and that older systems are unlikely to encounter
unrepresentable inode numbers anyway.

[akpm: alpha build fix]
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:03:40 -07:00
David Howells
3f2e05e90e [PATCH] BLOCK: Revert patch to hack around undeclared sigset_t in linux/compat.h
Revert Andrew Morton's patch to temporarily hack around the lack of a
declaration of sigset_t in linux/compat.h to make the block-disablement
patches build on IA64.  This got accidentally pushed to Linus and should
be fixed in a different manner.

Also make linux/compat.h #include asm/signal.h to gain a definition of
sigset_t so that it can externally declare sigset_from_compat().

This has been compile-tested for i386, x86_64, ia64, mips, mips64, frv, ppc and
ppc64 and run-tested on frv.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 08:03:31 -07:00
Jay Lan
8f0ab51479 [PATCH] csa: convert CONFIG tag for extended accounting routines
There were a few accounting data/macros that are used in CSA but are #ifdef'ed
inside CONFIG_BSD_PROCESS_ACCT.  This patch is to change those ifdef's from
CONFIG_BSD_PROCESS_ACCT to CONFIG_TASK_XACCT.  A few defines are moved from
kernel/acct.c and include/linux/acct.h to kernel/tsacct.c and
include/linux/tsacct_kern.h.

Signed-off-by: Jay Lan <jlan@sgi.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Jes Sorensen <jes@sgi.com>
Cc: Chris Sturtivant <csturtiv@sgi.com>
Cc: Tony Ernst <tee@sgi.com>
Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:29 -07:00
Badari Pulavarty
ee0b3e671b [PATCH] Remove readv/writev methods and use aio_read/aio_write instead
This patch removes readv() and writev() methods and replaces them with
aio_read()/aio_write() methods.

Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:28 -07:00
David Howells
07f3f05c1e [PATCH] BLOCK: Move extern declarations out of fs/*.c into header files [try ]
Create a new header file, fs/internal.h, for common definitions local to the
sources in the fs/ directory.

Move extern definitions that should be in header files from fs/*.c to
fs/internal.h or other main header files where they span directories.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:52:18 +02:00
Andi Kleen
758333458a [PATCH] Check return value of copy_to_user in compat_sys_pselect7
Fix

linux/fs/compat.c: In function compat_sys_pselect7
linux/fs/compat.c:1869: warning: ignoring return value of copy_to_user, declared with attribute warn_unused_result

To make it easier to handle I changed to semantics to not try to
write out a timespec if an error occurred. I hope that's ok.

Cc: dwmw2@infradead.org

Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:39 +02:00
Andi Kleen
bebfa1013e [PATCH] x86_64: Add compat_printk and sysctl to turn off compat layer warnings
Sometimes e.g. with crashme the compat layer warnings can be noisy.
Add a way to turn them off by gating all output through compat_printk
that checks a global sysctl. The default is not changed.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 10:48:16 -07:00