renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-29 07:34:06 +08:00
Code
767,176 Commits 41 Branches 2 Tags 3.4 GiB
2ae8695570
Commit Graph

4862 Commits

Author SHA1 Message Date
Linus Torvalds
9215310cf1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 
Pull networking fixes from David Miller:

 1) Various netfilter fixlets from Pablo and the netfilter team.

 2) Fix regression in IPVS caused by lack of PMTU exceptions on local
    routes in ipv6, from Julian Anastasov.

 3) Check pskb_trim_rcsum for failure in DSA, from Zhouyang Jia.

 4) Don't crash on poll in TLS, from Daniel Borkmann.

 5) Revert SO_REUSE{ADDR,PORT} change, it regresses various things
    including Avahi mDNS. From Bart Van Assche.

 6) Missing of_node_put in qcom/emac driver, from Yue Haibing.

 7) We lack checking of the TCP checking in one special case during SYN
    receive, from Frank van der Linden.

 8) Fix module init error paths of mac80211 hwsim, from Johannes Berg.

 9) Handle 802.1ad properly in stmmac driver, from Elad Nachman.

10) Must grab HW caps before doing quirk checks in stmmac driver, from
    Jose Abreu.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits)
  net: stmmac: Run HWIF Quirks after getting HW caps
  neighbour: skip NTF_EXT_LEARNED entries during forced gc
  net: cxgb3: add error handling for sysfs_create_group
  tls: fix waitall behavior in tls_sw_recvmsg
  tls: fix use-after-free in tls_push_record
  l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl()
  l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels
  mlxsw: spectrum_switchdev: Fix port_vlan refcounting
  mlxsw: spectrum_router: Align with new route replace logic
  mlxsw: spectrum_router: Allow appending to dev-only routes
  ipv6: Only emit append events for appended routes
  stmmac: added support for 802.1ad vlan stripping
  cfg80211: fix rcu in cfg80211_unregister_wdev
  mac80211: Move up init of TXQs
  mac80211_hwsim: fix module init error paths
  cfg80211: initialize sinfo in cfg80211_get_station
  nl80211: fix some kernel doc tag mistakes
  hv_netvsc: Fix the variable sizes in ipsecv2 and rsc offload
  rds: avoid unenecessary cong_update in loop transport
  l2tp: clean up stale tunnel or session in pppol2tp_connect's error path
  ...
 2018-06-16 07:39:34 +09:00
Toke Høiland-Jørgensen
dc8b274f09 mac80211: Move up init of TXQs 
On init, ieee80211_if_add() dumps the interface. Since that now includes a
dump of the TXQ state, we need to initialise that before the dump happens.
So move up the TXQ initialisation to to before the call to
ieee80211_if_add().

Fixes: 52539ca89f ("cfg80211: Expose TXQ stats and parameters to userspace")
Reported-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
 2018-06-15 13:02:42 +02:00
Kees Cook
6396bb2215 treewide: kzalloc() -> kcalloc() 
The kzalloc() function has a 2-factor argument form, kcalloc(). This
patch replaces cases of:

        kzalloc(a * b, gfp)

with:
        kcalloc(a * b, gfp)

as well as handling cases of:

        kzalloc(a * b * c, gfp)

with:

        kzalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kzalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kzalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kzalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kzalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kzalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kzalloc
+ kcalloc
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kzalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kzalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kzalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kzalloc(sizeof(THING) * C2, ...)
|
  kzalloc(sizeof(TYPE) * C2, ...)
|
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(C1 * C2, ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
 2018-06-12 16:19:22 -07:00
Kees Cook
6da2ec5605 treewide: kmalloc() -> kmalloc_array() 
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
patch replaces cases of:

        kmalloc(a * b, gfp)

with:
        kmalloc_array(a * b, gfp)

as well as handling cases of:

        kmalloc(a * b * c, gfp)

with:

        kmalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kmalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kmalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The tools/ directory was manually excluded, since it has its own
implementation of kmalloc().

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kmalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kmalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kmalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kmalloc
+ kmalloc_array
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kmalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kmalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kmalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kmalloc(sizeof(THING) * C2, ...)
|
  kmalloc(sizeof(TYPE) * C2, ...)
|
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(C1 * C2, ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
 2018-06-12 16:19:22 -07:00
David S. Miller
5b79c2af66 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 
Lots of easy overlapping changes in the confict
resolutions here.

Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-05-26 19:46:15 -04:00
Ilan Peer
d4e36e5554 mac80211: Support adding duration for prepare_tx() callback 
There are specific cases, such as SAE authentication exchange, that
might require long duration to complete. For such cases, add support
for indicating to the driver the required duration of the prepare_tx()
operation, so the driver would still be able to complete the frame
exchange.

Currently, indicate the duration only for SAE authentication exchange,
as SAE authentication can take up to 2000 msec (as defined in IEEE
P802.11-REVmd D1.0 p. 3504).

As the patch modified the prepare_tx() callback API, also modify
the relevant code in iwlwifi.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-05-23 11:06:10 +02:00
Johannes Berg
dd8070bff2 Merge remote-tracking branch 'net-next/master' into mac80211-next 
Bring in net-next which had pulled in net, so I have the changes
from mac80211 and can apply a patch that would otherwise conflict.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-05-23 11:05:59 +02:00
Johannes Berg
0fdf1493b4 mac80211: allocate and fill tidstats only when needed 
This fixes memory leaks in the case where we just have the
station info on the stack for internal usage without sending
it to cfg80211.

Fixes: 8689c051a2 ("cfg80211: dynamically allocate per-tid stats for station info")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-05-18 11:40:44 +02:00
Alexander Wetzel
39c1134c66 mac80211: fix TX aggregation stop race 
The mac80211 tear down code is not waiting for the driver call back.
This can bring down the the TX path (TID) till the user manually
reconnects. (Observed with iwldvm and enabled TX aggregation.)

The race can be prevented when the ampdu_mlme worker handles the tear
down.

The race:
 * ieee80211_sta_tear_down_BA_sessions calls
   ___ieee80211_stop_tx_ba_session for all TIDs,

 * then cancels the ampdu_mlme worker

 * and cleanups the TIDs the driver already has called back for.

 * ieee80211_stop_tx_ba_cb will never be called for a TID if the callback
   came after the the check in ieee80211_sta_tear_down_BA_sessions.

Signed-off-by: Alexander Wetzel <Alexander.Wetzel@web.de>
[johannes: "enabled" -> "blocked" and invert logic, simplify init]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-05-18 11:14:36 +02:00
Johannes Berg
73887fd906 cfg80211/mac80211: revert to stack allocation for sinfo 
Arend's previous patch made the sinfo structure smaller
again by to dynamically allocating the per-tid stats
only when needed. Thus, revert to stack allocation for
the struct to simplify the code.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-05-18 11:14:35 +02:00
Arend van Spriel
8689c051a2 cfg80211: dynamically allocate per-tid stats for station info 
With the addition of TXQ stats in the per-tid statistics the struct
station_info grew significantly. This resulted in stack size warnings
due to the structure itself being above the limit for the warnings.

Add an allocation function that those who want to provide per-tid
stats should use to allocate the tid array, i.e.
struct station_info::pertid.

Cc: Toke Høiland-Jørgensen <toke@toke.dk>
Fixes: 52539ca89f ("cfg80211: Expose TXQ stats and parameters to userspace")
Signed-off-by: Arend van Spriel <aspriel@gmail.com>
[johannes: fix missing BIT() and logic by removing]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-05-18 11:14:34 +02:00
Bob Copeland
1d6741d864 mac80211: mesh: fix premature update of rc stats 
The mesh_neighbour_update() function, queued via beacon rx, can race with
userspace creating the same station.  If the station already exists by the
time mesh_neighbour_update() is called, the function wrongly assumes rate
control has been initialized and calls rate_control_rate_update(), which
in turn calls into the driver.

Updating the rate control before it has been initialized can cause a
crash in some drivers, for example this firmware crash in ath10k due
to sta->rx_nss being 0:

[ 3078.088247] mesh0: Inserted STA 5c:e2:8c:f1:ab:ba
[ 3078.258407] ath10k_pci 0000:0d:00.0: firmware crashed! (uuid d6ed5961-93cc-4d61-803f-5eda55bb8643)
[ 3078.258421] ath10k_pci 0000:0d:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[ 3078.258426] ath10k_pci 0000:0d:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 0 testmode 0
[ 3078.258608] ath10k_pci 0000:0d:00.0: firmware ver 10.2.4.70.59-2 api 5 features no-p2p,raw-mode,mfp crc32 4159f498
[ 3078.258613] ath10k_pci 0000:0d:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[ 3078.258617] ath10k_pci 0000:0d:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1
[ 3078.260627] ath10k_pci 0000:0d:00.0: firmware register dump:
[ 3078.260640] ath10k_pci 0000:0d:00.0: [00]: 0x4100016C 0x000015B3 0x009A31BB 0x00955B31
[ 3078.260647] ath10k_pci 0000:0d:00.0: [04]: 0x009A31BB 0x00060130 0x00000008 0x00000007
[ 3078.260652] ath10k_pci 0000:0d:00.0: [08]: 0x00000000 0x00955B31 0x00000000 0x0040F89E
[ 3078.260656] ath10k_pci 0000:0d:00.0: [12]: 0x00000009 0xFFFFFFFF 0x009580F5 0x00958117
[ 3078.260660] ath10k_pci 0000:0d:00.0: [16]: 0x00958080 0x0094085D 0x00000000 0x00000000
[ 3078.260664] ath10k_pci 0000:0d:00.0: [20]: 0x409A31BB 0x0040AA84 0x00000002 0x00000001
[ 3078.260669] ath10k_pci 0000:0d:00.0: [24]: 0x809A2B8D 0x0040AAE4 0x00000088 0xC09A31BB
[ 3078.260673] ath10k_pci 0000:0d:00.0: [28]: 0x809898C8 0x0040AB04 0x0043F91C 0x009C6458
[ 3078.260677] ath10k_pci 0000:0d:00.0: [32]: 0x809B66AC 0x0040AB34 0x009C6458 0x0043F91C
[ 3078.260686] ath10k_pci 0000:0d:00.0: [36]: 0x809B2824 0x0040ADA4 0x00400000 0x00416EB4
[ 3078.260692] ath10k_pci 0000:0d:00.0: [40]: 0x809C07D9 0x0040ADE4 0x0040AE08 0x00412028
[ 3078.260696] ath10k_pci 0000:0d:00.0: [44]: 0x809486FA 0x0040AE04 0x00000001 0x00000000
[ 3078.260700] ath10k_pci 0000:0d:00.0: [48]: 0x80948E2C 0x0040AEA4 0x0041F4F0 0x00412634
[ 3078.260704] ath10k_pci 0000:0d:00.0: [52]: 0x809BFC39 0x0040AEC4 0x0041F4F0 0x00000001
[ 3078.260709] ath10k_pci 0000:0d:00.0: [56]: 0x80940F18 0x0040AF14 0x00000010 0x00403AC0
[ 3078.284130] ath10k_pci 0000:0d:00.0: failed to to request monitor vdev 1 stop: -108

Fix this by checking whether the sta has already initialized rate control
using the flag for that purpose.  We can also drop the unnecessary insert
parameter here.

Signed-off-by: Bob Copeland <bobcopeland@fb.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-05-18 10:02:28 +02:00
Colin Ian King
57c6cb8171 mac80211: ethtool: avoid 32 bit multiplication overflow 
The multiplication of 100000 * cfg80211_calculate_bitrate() is a 32 bit
operation and can overflow if cfg80211_calculate_bitrate is greater
than 42949. Although I don't believe this is occurring at present, it
would be safer to avoid the potential overflow by making the constant
100000 an ULL to ensure a 64 multiplication occurs.

Detected by CoverityScan, CID#1468643 ("Unintentional integer overflow")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-05-08 15:02:03 +02:00
Toke Høiland-Jørgensen
2fe4a29a45 mac80211: Support the new cfg80211 TXQ stats API 
This adds support to mac80211 to export TXQ stats via the newly added
cfg80211 API.

Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-05-08 13:25:22 +02:00
Toke Høiland-Jørgensen
52539ca89f cfg80211: Expose TXQ stats and parameters to userspace 
This adds support for exporting the mac80211 TXQ stats via nl80211 by
way of a nested TXQ stats attribute, as well as for configuring the
quantum and limits that were previously only changeable through debugfs.

This commit adds just the nl80211 API, a subsequent commit adds support to
mac80211 itself.

Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-05-08 13:19:24 +02:00
Balaji Pothunoori
cc60dbbfed mac80211: average ack rssi support for data frames 
The driver will process the RSSI if available and send it to mac80211.
mac80211 will compute the weighted average of ack RSSI for stations.

Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-05-07 21:41:16 +02:00
Gregory Greenman
03737001e4 mac80211: add api to set CSA counter in mac80211 
Sometimes the most updated CSA counter values are known only
to the device. Add an API to pass this data to mac80211.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-05-07 20:50:15 +02:00
Johannes Berg
a403f3bf63 mac80211: remove pointless flags=0 assignment 
The data structure is initialized to all zeroes, and
we already rely on that in other places, so remove the
pointless assignment to 0.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-05-07 20:50:07 +02:00
Johannes Berg
bfb27814e3 mac80211: ethtool: memset the whole sinfo struct to 0 
Rather than just setting the valid flags to 0 set the
whole struct to 0 since other places might rely on it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-05-07 20:49:59 +02:00
Johannes Berg
35f4962c01 mac80211: clean up rate info bandwidth setting 
There's no need to do the same thing three times in
the different switch cases, pull that out to a single
place.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-05-07 20:49:52 +02:00
Johannes Berg
c096b92aa7 mac80211: rename rtap_vendor_space to rtap_space 
Since all the HE data won't fit into struct ieee80211_rx_status,
we'll (have to) move that into the SKB proper. This means we'll
need to skip over more things in the future, so rename this to
remove the vendor-only notion from it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-05-07 20:49:44 +02:00
Sara Sharon
914eac248d mac80211: use timeout from the AddBA response instead of the request 
2016 spec, section 10.24.2 specifies that the block ack
timeout in the ADD BA request is advisory.

That means we should check the value in the response and
act upon it (same as buffer size).

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-05-07 20:35:15 +02:00
Ilan Peer
407879b690 mac80211: Adjust SAE authentication timeout 
The IEEE P802.11-REVmd D1.0 specification updated the SAE authentication
timeout to be 2000 milliseconds (see dot11RSNASAERetransPeriod). Update
the SAE timeout setting accordingly.

While at it, reduce some code duplication in the timeout configuration.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-05-07 16:04:02 +02:00
Ilan Peer
911a26484c mac80211: Fix condition validating WMM IE 
Commit c470bdc1aa ("mac80211: don't WARN on bad WMM parameters from
buggy APs") handled cases where an AP reports a zeroed WMM
IE. However, the condition that checks the validity accessed the wrong
index in the ieee80211_tx_queue_params array, thus wrongly deducing
that the parameters are invalid. Fix it.

Fixes: c470bdc1aa ("mac80211: don't WARN on bad WMM parameters from buggy APs")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-04-19 15:46:22 +02:00
David S. Miller
e15f20ea33 We have a fair number of patches, but many of them are from the 
first bullet here:
  * EAPoL-over-nl80211 from Denis - this will let us fix
    some long-standing issues with bridging, races with
    encryption and more
  * DFS offload support from the qtnfmac folks
  * regulatory database changes for the new ETSI adaptivity
    requirements
  * various other fixes and small enhancements
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAlq85QQACgkQB8qZga/f
 l8Sdbg//bc8C/4F1TUdJqZWGK1j9Lwd6nZpP0iFqH5Ees3MMnti5XdV2dCL31ivz
 c8DOuRAU8ZG/RLPgSTHVZHwh+f7S5/TxSKg8WOBvrYk7a0C1uvVVhe5XZQEmqE7g
 eqM0+UQ5DyzUYnu0kSUrFKPV7BqDa2YzVDdK8e8iozqZmAnvGN9k8H7EDEeUxtxk
 LEl+bEcmhDSfIssU2Iaksl+9qoZP6BkoVGAOmDzIL654WV4XVKorxRX6vndqSQGu
 0cCz2Occ+/0hfvszONBRR4M/gtI/Yyn3u+D1Q0YD3X40Q9gJE11fcodmMT61l5C7
 rGcu94RIGilvRvjZScK3giiU2L7DD+VETUa+YGnjd8gLpmrYd6cURxlm4yuHbw8C
 UScLCApAUuY+skmPLeuyHW9mnzHaC336vzVjk8OhdNRhX23/rB8nk1yIywgqETVW
 g/iub8/Xp6TRfdyh76I18wlfqCp1It2JAeICgKH5NPlwUA6U0xFR0/ddSR8FuAcK
 ZLY8mgsc2kIH6r4x5sjeH+Yb6tGi/Z3HMZM2hna+t4vSpn6Q5+GPsA6yuHuBUhJb
 8QswMiLDSux8I4guKgQyROiHaCzE3zOigJ4o1z9XITKsgluZVxnKr+ETKdr88WFp
 II8U0qH/kejXIfxUjbv5Wla70J9wi/hjxR6vOfSkEtYNvIApdfc=
 =hI0F
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-next-for-davem-2018-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
We have a fair number of patches, but many of them are from the
first bullet here:
 * EAPoL-over-nl80211 from Denis - this will let us fix
   some long-standing issues with bridging, races with
   encryption and more
 * DFS offload support from the qtnfmac folks
 * regulatory database changes for the new ETSI adaptivity
   requirements
 * various other fixes and small enhancements
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-03-29 16:23:26 -04:00
Emmanuel Grumbach
c470bdc1aa mac80211: don't WARN on bad WMM parameters from buggy APs 
Apparently, some APs are buggy enough to send a zeroed
WMM IE. Don't WARN on this since this is not caused by a bug
on the client's system.

This aligns the condition of the WARNING in drv_conf_tx
with the validity check in ieee80211_sta_wmm_params.
We will now pick the default values whenever we get
a zeroed WMM IE.

This has been reported here:
https://bugzilla.kernel.org/show_bug.cgi?id=199161

Fixes: f409079bb6 ("mac80211: sanity check CW_min/CW_max towards driver")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-03-29 15:02:38 +02:00
Denis Kenzior
018f6fbf54 mac80211: Send control port frames over nl80211 
If userspace requested control port frames to go over 80211, then do so.
The control packets are intercepted just prior to delivery of the packet
to the underlying network device.

Pre-authentication type frames (protocol: 0x88c7) are also forwarded
over nl80211.

Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-03-29 14:08:30 +02:00
Denis Kenzior
9118064914 mac80211: Add support for tx_control_port 
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-03-29 14:01:27 +02:00
Johannes Berg
4d191c7536 mac80211: remove shadowing duplicated variable 
We already have 'ifmgd' here, and it's already assigned
to the same value, so remove the duplicate.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-03-29 11:35:23 +02:00
Manikanta Pubbisetty
db3bdcb9c3 mac80211: allow AP_VLAN operation on crypto controlled devices 
In the current implementation, mac80211 advertises the support of
AP_VLANs based on the driver's support for AP mode; it also
blocks encrypted AP_VLAN operation on devices advertising
SW_CRYPTO_CONTROL.

The implementation seems weird in it's current form and could be
often confusing, this is because there can be drivers advertising
both SW_CRYPTO_CONTROL and AP mode support (ex: ath10k) in which case
AP_VLAN will still be supported but only in open BSS and not in
secured BSS.

When SW_CRYPTO_CONTROL is enabled, it makes more sense if the decision
to support AP_VLANs is left to the driver. Mac80211 can then allow
AP_VLAN operations depending on the driver support.

Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-03-29 11:35:22 +02:00
Haim Dreyfuss
e552af0581 mac80211: limit wmm params to comply with ETSI requirements 
ETSI has recently added new requirements that restrict the WMM
parameter values for 5GHz frequencies.  We need to take care of the
following scenarios in order to comply with these new requirements:

1. When using mac80211 default values;
2. When the userspace tries to configure its own values;
3. When associating to an AP which advertises WWM IE.

When associating to an AP, the client uses the values in the
advertised WMM IE.  But the AP may not comply with the new ETSI
requirements, so the client needs to check the current regulatory
rules and use those limits accordingly.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-03-29 11:11:50 +02:00
tamizhr@codeaurora.org
97f5f4254a mac80211: Use proper chan_width enum in sta opmode event 
Bandwidth change value reported via nl80211 contains mac80211
specific enum value(ieee80211_sta_rx_bw) and which is not
understand by userspace application. Map the mac80211 specific
value to nl80211_chan_width enum value to avoid using wrong value
in the userspace application. And used station's ht/vht capability
to map IEEE80211_STA_RX_BW_20 and IEEE80211_STA_RX_BW_160 with
proper nl80211 value.

Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-03-29 10:19:59 +02:00
tamizhr@codeaurora.org
57566b2003 mac80211: Use proper smps_mode enum in sta opmode event 
SMPS_MODE change value notified via nl80211 contains mac80211
specific value(ieee80211_smps_mode) and user space application
will not know those values. This patch add support to map
the mac80211 enum value to nl80211_smps_mode which will be
understood by the userspace application.

Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-03-29 10:19:55 +02:00
Joe Perches
d6444062f8 net: Use octal not symbolic permissions 
Prefer the direct use of octal for permissions.

Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace
and some typing.

Miscellanea:

o Whitespace neatening around these conversions.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-03-26 12:07:48 -04:00
David S. Miller
03fe2debbb Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 
Fun set of conflict resolutions here...

For the mac80211 stuff, these were fortunately just parallel
adds.  Trivially resolved.

In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the
function phy_disable_interrupts() earlier in the file, whilst in
'net-next' the phy_error() call from this function was removed.

In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the
'rt_table_id' member of rtable collided with a bug fix in 'net' that
added a new struct member "rt_mtu_locked" which needs to be copied
over here.

The mlxsw driver conflict consisted of net-next separating
the span code and definitions into separate files, whilst
a 'net' bug fix made some changes to that moved code.

The mlx5 infiniband conflict resolution was quite non-trivial,
the RDMA tree's merge commit was used as a guide here, and
here are their notes:

====================

    Due to bug fixes found by the syzkaller bot and taken into the for-rc
    branch after development for the 4.17 merge window had already started
    being taken into the for-next branch, there were fairly non-trivial
    merge issues that would need to be resolved between the for-rc branch
    and the for-next branch.  This merge resolves those conflicts and
    provides a unified base upon which ongoing development for 4.17 can
    be based.

    Conflicts:
            drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f95
            (IB/mlx5: Fix cleanup order on unload) added to for-rc and
            commit b5ca15ad7e (IB/mlx5: Add proper representors support)
            add as part of the devel cycle both needed to modify the
            init/de-init functions used by mlx5.  To support the new
            representors, the new functions added by the cleanup patch
            needed to be made non-static, and the init/de-init list
            added by the representors patch needed to be modified to
            match the init/de-init list changes made by the cleanup
            patch.
    Updates:
            drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function
            prototypes added by representors patch to reflect new function
            names as changed by cleanup patch
            drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init
            stage list to match new order from cleanup patch
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-03-23 11:31:58 -04:00
Pradeep Kumar Chitrapu
dcbe73ca55 mac80211: notify driver for change in multicast rates 
With drivers implementing rate control in driver or firmware
rate_control_send_low() may not get called, and thus the
driver needs to know about changes in the multicast rate.

Add and use a new BSS change flag for this.

Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
[rewrite commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-03-23 13:23:17 +01:00
Tosoni
1ad22fb5bb mac80211: inform wireless layer when frame RSSI is invalid 
When the low-level driver returns an invalid RSSI indication,
set the signal value to 0 as an indication to the upper layer.

Also, skip average level computation if signal is invalid.

Signed-off-by: Jean Pierre TOSONI <jp.tosoni@acksys.fr>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-03-21 11:27:11 +01:00
Ben Caradoc-Davies
7c181f4fcd mac80211: add ieee80211_hw flag for QoS NDP support 
Commit 7b6ddeaf27 ("mac80211: use QoS NDP for AP probing") added an
argument qos_ok to ieee80211_nullfunc_get to support QoS NDP. Despite
the claim in the commit log "Change all the drivers to *not* allow
QoS NDP for now, even though it looks like most of them should be OK
with that", this commit enables QoS NDP in response to beacons (see
change to mlme.c:ieee80211_send_nullfunc), causing ath9k_htc to lose
IP connectivity. See:
https://patchwork.kernel.org/patch/10241109/
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=891060

Introduce a hardware flag to allow such buggy drivers to override the
correct default behaviour of mac80211 of sending QoS NDP packets.

Signed-off-by: Ben Caradoc-Davies <ben@transient.nz>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-03-21 10:56:18 +01:00
Joe Perches
0c3d5a96d5 net: drivers/net: Remove unnecessary skb_copy_expand OOM messages 
skb_copy_expand without __GFP_NOWARN already does a dump_stack
on OOM so these messages are redundant.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-03-15 14:28:03 -04:00
David S. Miller
0f3e9c97eb Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 
All of the conflicts were cases of overlapping changes.

In net/core/devlink.c, we have to make care that the
resouce size_params have become a struct member rather
than a pointer to such an object.

Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-03-06 01:20:46 -05:00
Felix Fietkau
24bba078ec mac80211: support A-MSDU in fast-rx 
Only works if the IV was stripped from packets. Create a smaller
variant of ieee80211_rx_h_amsdu, which bypasses checks already done
within the fast-rx context.

In order to do so, update cfg80211's ieee80211_data_to_8023_exthdr()
to take the offset between header and snap.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-02-27 13:30:53 +01:00
Ilan Peer
21b7022f13 mac80211: agg-rx: Accept ADDBA request update if timeout did not change 
As there is no support for updating an existing ADDBA session with
a peer, we decline the request (while keeping the session active).
However, in case that the timeout did not change, there is no need
to decline the request, so modify the code to reply with status success
in such a case (this is useful for interoperability with APs that send an
ADDBA request update without changing the timeout value).

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-02-27 11:06:04 +01:00
Felix Fietkau
9251a4736e mac80211: support station 4-addr mode fast-rx 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-02-27 11:05:52 +01:00
Felix Fietkau
1d87016241 mac80211: support fast-rx with incompatible PS capabilities when PS is disabled 
When powersave is disabled for the interface, we can do fast-rx anyway.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
[fixed indentation on one line]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-02-27 11:05:52 +01:00
Felix Fietkau
59cae5b9d6 mac80211: support AP 4-addr mode fast-rx 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-02-27 11:05:51 +01:00
David S. Miller
f74290fdb3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2018-02-24 00:04:20 -05:00
Felix Fietkau
b323ac19b7 mac80211: drop frames with unexpected DS bits from fast-rx to slow path 
Fixes rx for 4-addr packets in AP mode. These may be used for setting
up a 4-addr link for stations that are allowed to do so.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-02-23 12:13:17 +01:00
Toke Høiland-Jørgensen
36148c2bbf mac80211: Adjust TSQ pacing shift 
Since we now have the convenient helper to do so, actually adjust the
TSQ pacing shift for packets going out over a WiFi interface. This
significantly improves throughput for locally-originated TCP
connections. The default pacing shift of 10 corresponds to ~1ms of
queued packet data. Adjusting this to a shift of 8 (i.e. ~4ms) improves
1-hop throughput for ath9k by a factor of 3, whereas increasing it more
has diminishing returns.

Achieved throughput for different values of sk_pacing_shift (average of
5 iterations of 10-sec netperf runs to a host on the other side of the
WiFi hop):

sk_pacing_shift 10:  43.21 Mbps (pre-patch)
sk_pacing_shift  9:  78.17 Mbps
sk_pacing_shift  8: 123.94 Mbps
sk_pacing_shift  7: 128.31 Mbps

Latency for competing flows increases from ~3 ms to ~10 ms with this
change. This is about the same magnitude of queueing latency induced by
flows that are not originated on the WiFi device itself (and so are not
limited by TSQ).

Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-02-23 12:08:56 +01:00
David S. Miller
ed04c46d4e Various fixes across the tree, the shortlog basically says it all: 
cfg80211: fix cfg80211_beacon_dup
   -> old bug in this code
 
   cfg80211: clear wep keys after disconnection
   -> certain ways of disconnecting left the keys
 
   mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4
   -> alignment issues with using 14 bytes
 
   mac80211: Do not disconnect on invalid operating class
   -> if the AP has a bogus operating class, let it be
 
   mac80211: Fix sending ADDBA response for an ongoing session
   -> don't send the same frame twice
 
   cfg80211: use only 1Mbps for basic rates in mesh
   -> interop issue with old versions of our code
 
   mac80211_hwsim: don't use WQ_MEM_RECLAIM
   -> it causes splats because it flushes work on a non-reclaim WQ
 
   regulatory: add NUL to request alpha2
   -> nla_put_string() issue from Kees
 
   mac80211: mesh: fix wrong mesh TTL offset calculation
   -> protocol issue
 
   mac80211: fix a possible leak of station stats
   -> error path might leak memory
 
   mac80211: fix calling sleeping function in atomic context
   -> percpu allocations need to be made with gfp flags
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAlqPIu8ACgkQB8qZga/f
 l8R6ww/+NWuu2T3rXSqfp0hDI/CYCwpMV12wsD/4BGC+6idZBicwLVwNyey7Frzh
 IUb8vpuUR0+gvacY9ogSsBGBlU/IjydJWGpXiXIlruB/WNdMTHor9LZHr8dH2jDn
 m8rYwzOdpnp73IvME3krtvLv24NrJmOjBlkGTZ236403yRtYqX5k/bn/AriYSqMm
 bGbXTM9acs3WTygvR8KwCpOPjuosw3VL/54nu52MIegkORAHKA7SOm6O8PCjaG2Q
 4pRopztpvGAIQOe+VzYt8n47uW2a8g6FGQnRZOusAzf98xZLgfTBric5y5Vtf4j4
 WiSFnECCugoC0se8op5C5OgPmPEK7cN0j22PrJ0wJzd8cFuZSnw+MoHQuvvaH3WF
 4DtLNOs9uWyNqN3PJES6hhQJi1WXMKAV2GNOLsp/P2jmZya/TrHFiBH8nIAGqJhj
 3rARKmamI1qMUBs62fQfpXl+iOzLzKNIy6RzDr81Rh3Jhavx/xR7uJKIyy4xwQc0
 NfvBABT21WwI6+KC7EEyOqbti+Ldee3hd0fKift4Uww9j+P7c8UXTrWeGlq31M+v
 QSX8YstmBcDAk/llAwK/nM+9t1gXLBS9ZDv2M+ag7be0wZIORDlehsMBE987T3AB
 UrPgpxCM8Yrk10yHbpaq3sstZo9xWLGzrwhAUFIw2WzbWFDrd8A=
 =kwiY
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-for-davem-2018-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Various fixes across the tree, the shortlog basically says it all:

  cfg80211: fix cfg80211_beacon_dup
  -> old bug in this code

  cfg80211: clear wep keys after disconnection
  -> certain ways of disconnecting left the keys

  mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4
  -> alignment issues with using 14 bytes

  mac80211: Do not disconnect on invalid operating class
  -> if the AP has a bogus operating class, let it be

  mac80211: Fix sending ADDBA response for an ongoing session
  -> don't send the same frame twice

  cfg80211: use only 1Mbps for basic rates in mesh
  -> interop issue with old versions of our code

  mac80211_hwsim: don't use WQ_MEM_RECLAIM
  -> it causes splats because it flushes work on a non-reclaim WQ

  regulatory: add NUL to request alpha2
  -> nla_put_string() issue from Kees

  mac80211: mesh: fix wrong mesh TTL offset calculation
  -> protocol issue

  mac80211: fix a possible leak of station stats
  -> error path might leak memory

  mac80211: fix calling sleeping function in atomic context
  -> percpu allocations need to be made with gfp flags
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-02-22 15:17:01 -05:00
Ilan Peer
94ba92713f mac80211: Call mgd_prep_tx before transmitting deauthentication 
In multi channel scenarios, when disassociating from the AP before a
beacon was heard from the AP, it is not guaranteed that the virtual
interface is granted air time for the transmission of the
deauthentication frame. This in turn can lead to various issues as
the AP might never get the deauthentication frame.

To mitigate such possible issues, add a HW flag indicating that the
driver requires mac80211 to call the mgd_prep_tx() driver callback
to make sure that the virtual interface is granted immediate airtime
to be able to transmit the frame, in case that no beacon was heard
from the AP.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2018-02-22 21:13:04 +01:00