Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no point in having an extra type for extra confusion. u64 is
unambiguous.
Conversion was done with the following coccinelle script:
@rem@
@@
-typedef u64 cycle_t;
@fix@
typedef cycle_t;
@@
-cycle_t
+u64
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Currently both the wakeup and irqsoff traces do not handle set_graph_notrace
well. The ftrace infrastructure will ignore the return paths of all
functions leaving them hanging without an end:
# echo '*spin*' > set_graph_notrace
# cat trace
[...]
_raw_spin_lock() {
preempt_count_add() {
do_raw_spin_lock() {
update_rq_clock();
Where the '*spin*' functions should have looked like this:
_raw_spin_lock() {
preempt_count_add();
do_raw_spin_lock();
}
update_rq_clock();
Instead, have the wakeup and irqsoff tracers ignore the functions that are
set by the set_graph_notrace like the function_graph tracer does. Move
the logic in the function_graph tracer into a header to allow wakeup and
irqsoff tracers to use it as well.
Cc: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
stable tags to them. I searched through my INBOX just as the merge window
opened and found lots of patches to pull. I ran them through all my tests
and they were in linux-next for a few days.
Features added this release:
----------------------------
o Module globbing. You can now filter function tracing to several
modules. # echo '*:mod:*snd*' > set_ftrace_filter (Dmitry Safonov)
o Tracer specific options are now visible even when the tracer is not
active. It was rather annoying that you can only see and modify tracer
options after enabling the tracer. Now they are in the options/ directory
even when the tracer is not active. Although they are still only visible
when the tracer is active in the trace_options file.
o Trace options are now per instance (although some of the tracer specific
options are global)
o New tracefs file: set_event_pid. If any pid is added to this file, then
all events in the instance will filter out events that are not part of
this pid. sched_switch and sched_wakeup events handle next and the wakee
pids.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWPLQ5AAoJEKKk/i67LK/8CTYIAI1u8DE5QCzv3J0p54jVpNVR
J5FqEU3eXIzd6FS4JXD4nxCeMpUZAy21YnhlZpsnrbJJM5bc9bUsBCwiKKM+MuSZ
ztmy2sgYKkO0h/KUdhNgYJrzis3/Ojquyx9iAqK5ST/Fr+nKYx81akFKjNK53iur
RJRut45sSa8rv11LaL8sgJ6hAWQTc+YkybUdZ5xaMdJmZ6A61T7Y6VzTjbUexuvL
hntCfTjYLtVd8dbfknAnf3B7n/VOO3IFF85wr7ciYR5oEVfPrF8tHmJBlhHExPpX
kaXAiDDRY/UTg/5DQqnp4zmxJoR5BQ2l4pT5PwiLcnwhcphIDNYS8EYUmOYAWjU=
=TjOE
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracking updates from Steven Rostedt:
"Most of the changes are clean ups and small fixes. Some of them have
stable tags to them. I searched through my INBOX just as the merge
window opened and found lots of patches to pull. I ran them through
all my tests and they were in linux-next for a few days.
Features added this release:
----------------------------
- Module globbing. You can now filter function tracing to several
modules. # echo '*:mod:*snd*' > set_ftrace_filter (Dmitry Safonov)
- Tracer specific options are now visible even when the tracer is not
active. It was rather annoying that you can only see and modify
tracer options after enabling the tracer. Now they are in the
options/ directory even when the tracer is not active. Although
they are still only visible when the tracer is active in the
trace_options file.
- Trace options are now per instance (although some of the tracer
specific options are global)
- New tracefs file: set_event_pid. If any pid is added to this file,
then all events in the instance will filter out events that are not
part of this pid. sched_switch and sched_wakeup events handle next
and the wakee pids"
* tag 'trace-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (68 commits)
tracefs: Fix refcount imbalance in start_creating()
tracing: Put back comma for empty fields in boot string parsing
tracing: Apply tracer specific options from kernel command line.
tracing: Add some documentation about set_event_pid
ring_buffer: Remove unneeded smp_wmb() before wakeup of reader benchmark
tracing: Allow dumping traces without tracking trace started cpus
ring_buffer: Fix more races when terminating the producer in the benchmark
ring_buffer: Do no not complete benchmark reader too early
tracing: Remove redundant TP_ARGS redefining
tracing: Rename max_stack_lock to stack_trace_max_lock
tracing: Allow arch-specific stack tracer
recordmcount: arm64: Replace the ignored mcount call into nop
recordmcount: Fix endianness handling bug for nop_mcount
tracepoints: Fix documentation of RCU lockdep checks
tracing: ftrace_event_is_function() can return boolean
tracing: is_legal_op() can return boolean
ring-buffer: rb_event_is_commit() can return boolean
ring-buffer: rb_per_cpu_empty() can return boolean
ring_buffer: ring_buffer_empty{cpu}() can return boolean
ring-buffer: rb_is_reader_page() can return boolean
...
This patch makes report_latency return bool to improve readability,
indicating whether this new latency should be reported/recorded.
No functional change.
Link: http://lkml.kernel.org/r/1443537816-5788-2-git-send-email-bywxiaobai@163.com
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
__trace_sched_switch_state() is the last remaining PREEMPT_ACTIVE
user, move trace_sched_switch() from prepare_task_switch() to
__schedule() and propagate the @preempt argument.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In preparation to make trace options per instance, the global trace_flags
needs to be moved from being a global variable to a field within the trace
instance trace_array structure.
There's still more work to do, as there's some functions that use
trace_flags without passing in a way to get to the current_trace array. For
those, the global_trace is used directly (from trace.c). This includes
setting and clearing the trace_flags. This means that when a new instance is
created, it just gets the trace_flags of the global_trace and will not be
able to modify them. Depending on the functions that have access to the
trace_array, the flags of an instance may not affect parts of its trace,
where the global_trace is used. These will be fixed in future changes.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When the function tracer is not compiled in, do not create the option files
for it.
Fix up both the sched_wakeup and irqsoff tracers to handle the change.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In order to facilitate making all tracer options visible even when the
tracer is not active, we need to get rid of duplicate options. Any option
that is shared between multiple tracers really should be a main option.
As the wakeup and irqsoff tracers both use the "display-graph" option, and
use it exactly the same way, move that option from the tracer options to the
main options and consolidate them.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In preparation for having trace options be per instance, the trace_array
needs to be passed to the trace_buffer_unlock_commit(). The
trace_event_buffer_lock_reserve() already passes in the trace_event_file
where the trace_array can be derived from.
Also added a "__init" to the boot up test event plus function tracing
function function_test_events_call().
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Mathieu reported that since 317f394160 ("sched: Move the second half
of ttwu() to the remote cpu") trace_sched_wakeup() can happen out of
context of the waker.
This is a problem when you want to analyse wakeup paths because it is
now very hard to correlate the wakeup event to whoever issued the
wakeup.
OTOH trace_sched_wakeup() is issued at the point where we set
p->state = TASK_RUNNING, which is right were we hand the task off to
the scheduler, so this is an important point when looking at
scheduling behaviour, up to here its been the wakeup path everything
hereafter is due to scheduler policy.
To bridge this gap, introduce a second tracepoint: trace_sched_waking.
It is guaranteed to be called in the waker context.
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Francis Giraldeau <francis.giraldeau@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150609091336.GQ3644@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The structures ftrace_event_call and
ftrace_event_class have nothing to do with the function hooks, and are
really trace_event structures. Rename ftrace_event_* to trace_event_*.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The creation of tracing files and directories is for the most part
encapsulated in helper functions in trace.c. Other files do not need to
include debugfs.h or fs.h, as they may have needed to in the past.
Remove them from the files that do not need them.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The only code that references tracing_sched_switch_trace() and
tracing_sched_wakeup_trace() is the wakeup latency tracer. Those
two functions use to belong to the sched_switch tracer which has
long been removed. These functions were left behind because the
wakeup latency tracer used them. But since the wakeup latency tracer
is the only one to use them, they should be static functions inside
that code.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Now that the ring buffer has a built in way to wake up readers
when there's data, using irq_work such that it is safe to do it
in any context. But it was still using the old "poor man's"
wait polling that checks every 1/10 of a second to see if it
should wake up a waiter. This makes the latency for a wake up
excruciatingly long. No need to do that anymore.
Completely remove the different wait_poll types from the tracers
and have them all use the default one now.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The wakeup and wakeup_rt tracers can now be used by instances.
But they may only be used by one instance at a time (including the
top level directory). This allows multiple tracers to run while
the wakeup tracer is running simultaneously.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In preparation for letting the latency tracers be used by instances,
remove the global tracing_max_latency variable and add a max_latency
field to the trace_array that the latency tracers will now use.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Instead of having a list of global functions that are called,
as only one global function is allow to be enabled at a time, there's
no reason to have a list.
Instead, simply have all the users of the global ops, use the global ops
directly, instead of registering their own ftrace_ops. Just switch what
function is used before enabling the function tracer.
This removes a lot of code as well as the complexity involved with it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As options (flags) may affect instances instead of being global
the flag_changed() callbacks need to receive the trace_array descriptor
of the instance they will be modifying.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As options (flags) may affect instances instead of being global
the set_flag() callbacks need to receive the trace_array descriptor
of the instance they will be modifying.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Some method to deal with rt-mutexes and make sched_dl interact with
the current PI-coded is needed, raising all but trivial issues, that
needs (according to us) to be solved with some restructuring of
the pi-code (i.e., going toward a proxy execution-ish implementation).
This is under development, in the meanwhile, as a temporary solution,
what this commits does is:
- ensure a pi-lock owner with waiters is never throttled down. Instead,
when it runs out of runtime, it immediately gets replenished and it's
deadline is postponed;
- the scheduling parameters (relative deadline and default runtime)
used for that replenishments --during the whole period it holds the
pi-lock-- are the ones of the waiting task with earliest deadline.
Acting this way, we provide some kind of boosting to the lock-owner,
still by using the existing (actually, slightly modified by the previous
commit) pi-architecture.
We would stress the fact that this is only a surely needed, all but
clean solution to the problem. In the end it's only a way to re-start
discussion within the community. So, as always, comments, ideas, rants,
etc.. are welcome! :-)
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
[ Added !RT_MUTEXES build fix. ]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-11-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It is very likely that systems that wants/needs to use the new
SCHED_DEADLINE policy also want to have the scheduling latency of
the -deadline tasks under control.
For this reason a new version of the scheduling wakeup latency,
called "wakeup_dl", is introduced.
As a consequence of applying this patch there will be three wakeup
latency tracer:
* "wakeup", that deals with all tasks in the system;
* "wakeup_rt", that deals with -rt and -deadline tasks only;
* "wakeup_dl", that deals with -deadline tasks only.
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-9-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, the only way to stop the latency tracers from doing function
tracing is to fully disable the function tracer from the proc file
system:
echo 0 > /proc/sys/kernel/ftrace_enabled
This is a big hammer approach as it disables function tracing for
all users. This includes kprobes, perf, stack tracer, etc.
Instead, create a function-trace option that the latency tracers can
check to determine if it should enable function tracing or not.
This option can be set or cleared even while the tracer is active
and the tracers will disable or enable function tracing depending
on how the option was set.
Instead of using the proc file, disable latency function tracing with
echo 0 > /debug/tracing/options/function-trace
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, the way the latency tracers and snapshot feature works
is to have a separate trace_array called "max_tr" that holds the
snapshot buffer. For latency tracers, this snapshot buffer is used
to swap the running buffer with this buffer to save the current max
latency.
The only items needed for the max_tr is really just a copy of the buffer
itself, the per_cpu data pointers, the time_start timestamp that states
when the max latency was triggered, and the cpu that the max latency
was triggered on. All other fields in trace_array are unused by the
max_tr, making the max_tr mostly bloat.
This change removes the max_tr completely, and adds a new structure
called trace_buffer, that holds the buffer pointer, the per_cpu data
pointers, the time_start timestamp, and the cpu where the latency occurred.
The trace_array, now has two trace_buffers, one for the normal trace and
one for the max trace or snapshot. By doing this, not only do we remove
the bloat from the max_trace but the instances of traces can now use
their own snapshot feature and not have just the top level global_trace have
the snapshot feature and latency tracers for itself.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The global and max-tr currently use static per_cpu arrays for the CPU data
descriptors. But in order to get new allocated trace_arrays, they need to
be allocated per_cpu arrays. Instead of using the static arrays, switch
the global and max-tr to use allocated data.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The global_trace variable in kernel/trace/trace.c has been kept 'static' and
local to that file so that it would not be used too much outside of that
file. This has paid off, even though there were lots of changes to make
the trace_array structure more generic (not depending on global_trace).
Removal of a lot of direct usages of global_trace is needed to be able to
create more trace_arrays such that we can add multiple buffers.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The latency tracers require the buffers to be in overwrite mode,
otherwise they get screwed up. Force the buffers to stay in overwrite
mode when latency tracers are enabled.
Added a flag_changed() method to the tracer structure to allow
the tracers to see what flags are being changed, and also be able
to prevent the change from happing.
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Move rt scheduler definitions out of include/linux/sched.h into
new file include/linux/sched/rt.h
Signed-off-by: Clark Williams <williams@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20130207094707.7b9f825f@riff.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull trivial branch from Jiri Kosina:
"Usual stuff -- comment/printk typo fixes, documentation updates, dead
code elimination."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
HOWTO: fix double words typo
x86 mtrr: fix comment typo in mtrr_bp_init
propagate name change to comments in kernel source
doc: Update the name of profiling based on sysfs
treewide: Fix typos in various drivers
treewide: Fix typos in various Kconfig
wireless: mwifiex: Fix typo in wireless/mwifiex driver
messages: i2o: Fix typo in messages/i2o
scripts/kernel-doc: check that non-void fcts describe their return value
Kernel-doc: Convention: Use a "Return" section to describe return values
radeon: Fix typo and copy/paste error in comments
doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c
various: Fix spelling of "asynchronous" in comments.
Fix misspellings of "whether" in comments.
eisa: Fix spelling of "asynchronous".
various: Fix spelling of "registered" in comments.
doc: fix quite a few typos within Documentation
target: iscsi: fix comment typos in target/iscsi drivers
treewide: fix typo of "suport" in various comments and Kconfig
treewide: fix typo of "suppport" in various comments
...
I've legally changed my name with New York State, the US Social Security
Administration, et al. This patch propagates the name change and change
in initials and login to comments in the kernel source as well.
Signed-off-by: Nadia Yvette Chambers <nyc@holomorphy.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
print_max and use_max_tr in struct tracer are "int" variables and
used like flags. This is wasteful, so change the type to "bool".
Link: http://lkml.kernel.org/r/20121002082710.9807.86393.stgit@falsita
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's times during debugging that it is helpful to see traces of early
boot functions. But the tracers are initialized at device_initcall()
which is quite late during the boot process. Setting the kernel command
line parameter ftrace=function will not show anything until the function
tracer is initialized. This prevents being able to trace functions before
device_initcall().
There's no reason that the tracers need to be initialized so late in the
boot process. Move them up to core_initcall() as they still need to come
after early_initcall() which initializes the tracing buffers.
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As more users of the function tracer utility are being added, they do
not always add the necessary recursion protection. To protect from
function recursion due to tracing, if the callback ftrace_ops does not
specifically specify that it protects against recursion (by setting
the FTRACE_OPS_FL_RECURSION_SAFE flag), the list operation will be
called by the mcount trampoline which adds recursion protection.
If the flag is set, then the function will be called directly with no
extra protection.
Note, the list operation is called if more than one function callback
is registered, or if the arch does not support all of the function
tracer features.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Return as the 4th paramater to the function tracer callback the pt_regs.
Later patches that implement regs passing for the architectures will require
having the ftrace_ops set the SAVE_REGS flag, which will tell the arch
to take the time to pass a full set of pt_regs to the ftrace_ops callback
function. If the arch does not support it then it should pass NULL.
If an arch can pass full regs, then it should define:
ARCH_SUPPORTS_FTRACE_SAVE_REGS to 1
Link: http://lkml.kernel.org/r/20120702201821.019966811@goodmis.org
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the function trace callback receives only the ip and parent_ip
of the function that it traced. It would be more powerful to also return
the ops that registered the function as well. This allows the same function
to act differently depending on what ftrace_ops registered it.
Link: http://lkml.kernel.org/r/20120612225424.267254552@goodmis.org
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The display of absolute time and duration fields is based on the
latency field. This was added during the irqsoff/wakeup tracers
graph support changes.
It's causing confusion in what fields will be displayed for the
function_graph tracer itself. So I'm removing this depency, and
adding absolute time and duration fields to the preemptirqsoff
preemptoff irqsoff wakeup tracers.
With following commands:
# echo function_graph > ./current_tracer
# cat trace
This is what it looked like before:
# tracer: function_graph
#
# TIME CPU DURATION FUNCTION CALLS
# | | | | | | | |
0) 0.068 us | } /* page_add_file_rmap */
0) | _raw_spin_unlock() {
...
This is what it looks like now:
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
0) 0.068 us | } /* add_preempt_count */
0) 0.993 us | } /* vfsmount_lock_local_lock */
...
For preemptirqsoff preemptoff irqsoff wakeup tracers,
this is what it looked like before:
SNIP
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / _-=> lock-depth
# |||| /
# CPU TASK/PID ||||| DURATION FUNCTION CALLS
# | | | ||||| | | | | | |
1) <idle>-0 | d..1 0.000 us | acpi_idle_enter_simple();
...
This is what it looks like now:
SNIP
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| /
# TIME CPU TASK/PID |||| DURATION FUNCTION CALLS
# | | | | |||| | | | | | |
19.847735 | 1) <idle>-0 | d..1 0.000 us | acpi_idle_enter_simple();
...
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1307113131-10045-2-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftrace_ops that are registered to trace functions can now be
agnostic to each other in respect to what functions they trace.
Each ops has their own hash of the functions they want to trace
and a hash to what they do not want to trace. A empty hash for
the functions they want to trace denotes all functions should
be traced that are not in the notrace hash.
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function start_func_tracer() was incorrectly added in the
#ifdef CONFIG_FUNCTION_TRACER condition, but is still used even
when function tracing is not enabled.
The calls to register_ftrace_function() and register_ftrace_graph()
become nops (and their arguments are even ignored), thus there is
no reason to hide start_func_tracer() when function tracing is
not enabled.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The wakeup tracer has three types of function tracers. Normal
function tracer, function graph entry, and function graph return.
Each of these use a complex dance to prevent recursion and whether
to trace the data or not (depending on the wake_task variable).
This patch moves the duplicate code into a single routine, to
prevent future mistakes with modifying duplicate complex code.
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add function graph support for wakeup latency tracer.
The graph output is enabled by setting the 'display-graph'
trace option.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1285243253-7372-4-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Documentation/trace/ftrace.txt says
buffer_size_kb:
This sets or displays the number of kilobytes each CPU
buffer can hold. The tracer buffers are the same size
for each CPU. The displayed number is the size of the
CPU buffer and not total size of all buffers. The
trace buffers are allocated in pages (blocks of memory
that the kernel uses for allocation, usually 4 KB in size).
If the last page allocated has room for more bytes
than requested, the rest of the page will be used,
making the actual allocation bigger than requested.
( Note, the size may not be a multiple of the page size
due to buffer management overhead. )
This can only be updated when the current_tracer
is set to "nop".
But it's incorrect. currently total memory consumption is
'buffer_size_kb x CPUs x 2'.
Why two times difference is there? because ftrace implicitly allocate
the buffer for max latency too.
That makes sad result when admin want to use large buffer. (If admin
want full logging and makes detail analysis). example, If admin
have 24 CPUs machine and write 200MB to buffer_size_kb, the system
consume ~10GB memory (200MB x 24 x 2). umm.. 5GB memory waste is
usually unacceptable.
Fortunatelly, almost all users don't use max latency feature.
The max latency buffer can be disabled easily.
This patch shrink buffer size of the max latency buffer if
unnecessary.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
LKML-Reference: <20100701104554.DA2D.A69D9226@jp.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ftrace_preempt_disable/enable functions were to address a
recursive race caused by the function tracer. The function tracer
traces all functions which makes it easily susceptible to recursion.
One area was preempt_enable(). This would call the scheduler and
the schedulre would call the function tracer and loop.
(So was it thought).
The ftrace_preempt_disable/enable was made to protect against recursion
inside the scheduler by storing the NEED_RESCHED flag. If it was
set before the ftrace_preempt_disable() it would not call schedule
on ftrace_preempt_enable(), thinking that if it was set before then
it would have already scheduled unless it was already in the scheduler.
This worked fine except in the case of SMP, where another task would set
the NEED_RESCHED flag for a task on another CPU, and then kick off an
IPI to trigger it. This could cause the NEED_RESCHED to be saved at
ftrace_preempt_disable() but the IPI to arrive in the the preempt
disabled section. The ftrace_preempt_enable() would not call the scheduler
because the flag was already set before entring the section.
This bug would cause a missed preemption check and cause lower latencies.
Investigating further, I found that the recusion caused by the function
tracer was not due to schedule(), but due to preempt_schedule(). Now
that preempt_schedule is completely annotated with notrace, the recusion
no longer is an issue.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch adds data to be passed to tracepoint callbacks.
The created functions from DECLARE_TRACE() now need a mandatory data
parameter. For example:
DECLARE_TRACE(mytracepoint, int value, value)
Will create the register function:
int register_trace_mytracepoint((void(*)(void *data, int value))probe,
void *data);
As the first argument, all callbacks (probes) must take a (void *data)
parameter. So a callback for the above tracepoint will look like:
void myprobe(void *data, int value)
{
}
The callback may choose to ignore the data parameter.
This change allows callbacks to register a private data pointer along
with the function probe.
void mycallback(void *data, int value);
register_trace_mytracepoint(mycallback, mydata);
Then the mycallback() will receive the "mydata" as the first parameter
before the args.
A more detailed example:
DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status));
/* In the C file */
DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status));
[...]
trace_mytracepoint(status);
/* In a file registering this tracepoint */
int my_callback(void *data, int status)
{
struct my_struct my_data = data;
[...]
}
[...]
my_data = kmalloc(sizeof(*my_data), GFP_KERNEL);
init_my_data(my_data);
register_trace_mytracepoint(my_callback, my_data);
The same callback can also be registered to the same tracepoint as long
as the data registered is different. Note, the data must also be used
to unregister the callback:
unregister_trace_mytracepoint(my_callback, my_data);
Because of the data parameter, tracepoints declared this way can not have
no args. That is:
DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS());
will cause an error.
If no arguments are needed, a new macro can be used instead:
DECLARE_TRACE_NOARGS(mytracepoint);
Since there are no arguments, the proto and args fields are left out.
This is part of a series to make the tracepoint footprint smaller:
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4914025 1088868 861512 6864405 68be15 vmlinux.class
4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint
Again, this patch also increases the size of the kernel, but
lays the ground work for decreasing it.
v5: Fixed net/core/drop_monitor.c to handle these updates.
v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the
#ifdef CONFIG_TRACE_POINTS, since the two are the same in both
cases. The __DECLARE_TRACE() is what changes.
Thanks to Frederic Weisbecker for pointing this out.
v3: Made all register_* functions require data to be passed and
all callbacks to take a void * parameter as its first argument.
This makes the calling functions comply with C standards.
Also added more comments to the modifications of DECLARE_TRACE().
v2: Made the DECLARE_TRACE() have the ability to pass arguments
and added a new DECLARE_TRACE_NOARGS() for tracepoints that
do not need any arguments.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
struct rq isn't visible outside of sched.o so its near useless to
expose the pointer, also there are no users of it, so remove it.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1272997616.1642.207.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Name space cleanup. No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: linux-arch@vger.kernel.org
Further name space cleanup. No functional change
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: linux-arch@vger.kernel.org
