If the allocation of a single request fails the already allocated
requests will not be freed.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Allow 0 and powers of 2 between 2 and 128 for write_cluster_size.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
When we fetch an interrupt on the CCW console using tsch (via
ccw_device_wait_idle formerly known as wait_cons_dev) we increment
the irq count for the affected interruption class but it is not
accounted as an IO interrupt.
This is broken since commit b603d258a4
"s390: remove superfluous tpi from wait_cons_dev"
Fix it so that the sum of the individual interrupts per class matches
the number of IO interrupts again.
Reported-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
In case a machine supports memory hotplug all active memory increments
present at IPL time have been initialized with a "usecount" of 1.
This is wrong if the memory increment size is larger than the memory
section size of the memory hotplug code. If that is the case the
usecount must be initialized with the number of memory sections that
fit into one memory increment.
Otherwise it is possible to put a memory increment into standby state
even if there are still active sections.
Afterwards addressing exceptions might happen which cause the kernel
to panic.
However even worse, if a memory increment was put into standby state
and afterwards into active state again, it's contents would have been
zeroed, leading to memory corruption.
This was only an issue for machines that support standby memory and
have at least 256GB memory.
This is broken since commit fdb1bb15 "[S390] sclp/memory hotplug: fix
initial usecount of increments".
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: stable@vger.kernel.org # 2.6.39+
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
We've seen repeatedly that 8KB stack size on 64 bit kernels
is not sufficient.
So simply remove the config option.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add a pointer to the system call table to the thread_info structure.
The TIF_31BIT bit is set or cleared by SET_PERSONALITY exactly once
for the lifetime of a process. With the pointer to the correct system
call table in thread_info the system call code in entry64.S path can
drop the check for TIF_31BIT which saves a couple of instructions.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Store the stack pointers in the lowcore for the kernel stack, the async
stack and the panic stack with the offset required for the first user.
This avoids an unnecessary add instruction on the system call path.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Also add some missing printk levels.
Signed-off-by: Dave Jones <davej@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20130425174002.GA26769@redhat.com
[ Tweaked the messages a bit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We occasionally get reports of these BUGs being hit, and the
stack trace doesn't necessarily always tell us what we need to
know about why we are hitting those limits.
If users start attaching /proc/lock_stats to reports we may have
more of a clue what's going on.
Signed-off-by: Dave Jones <davej@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20130423163403.GA12839@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit fc9bbca8f6 (vm: convert fb_mmap to
vm_iomap_memory() helper) made fbmem.c use vm_iomap_memory, but also
accidentally removed the check for mmio's availability.
Add the check back.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Improve fb_mmap bounds checks in gbefb, smscufx, udlfb and vfb drivers to
prevent possible uint overflows.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Steve Glendinning <steve.glendinning@smsc.com>
Cc: Bernie Thompson <bernie@plugable.com>
Use vm_iomap_memory() instead of [io_]remap_pfn_range().
vm_iomap_memory() gives us much simpler API to map memory to userspace,
and reduces possibilities for bugs.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
on some Apple machines because they implement EFI spec 1.10, which
doesn't provide a QueryVariableInfo() runtime function and the logic
used to check for the existence of that function was insufficient.
Fix from Josh Boyer.
* The anti-bricking algorithm also introduced a compiler warning on
32-bit. Fix from Borislav Petkov.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=l/fT
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent' into x86/urgent
* The EFI variable anti-bricking algorithm merged in -rc8 broke booting
on some Apple machines because they implement EFI spec 1.10, which
doesn't provide a QueryVariableInfo() runtime function and the logic
used to check for the existence of that function was insufficient.
Fix from Josh Boyer.
* The anti-bricking algorithm also introduced a compiler warning on
32-bit. Fix from Borislav Petkov.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
User applications running on SMP kernels have long suffered from instability
and random segmentation faults. This patch improves the situation although
there is more work to be done.
One of the problems is the various routines in pgtable.h that update page table
entries use different locking mechanisms, or no lock at all (set_pte_at). This
change modifies the routines to all use the same lock pa_dbit_lock. This lock
is used for dirty bit updates in the interruption code. The patch also purges
the TLB entries associated with the PTE to ensure that inconsistent values are
not used after the page table entry is updated. The UP and SMP code are now
identical.
The change also includes a minor update to the purge_tlb_entries function in
cache.c to improve its efficiency.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
CONFIG_MLONGCALLS was introduced in commit
ec758f9832 to overcome linker issues when linking
huge linux kernels, e.g. with many modules linked in.
But in the kernel module loader there is no support yet for the new relocation
types, which is why modules built with -mlong-calls can't be loaded.
Furthermore, for modules long calls are not really necessary, since we already
use stub sections which resolve long distance calls.
So, let's just disable this compiler option when compiling kernel modules.
Signed-off-by: Helge Deller <deller@gmx.de>
When targetting 32-bit processors, __put_user emits a pair of stw
instructions for the 8-byte case. If the type of __val is a pointer, the
marshalling code casts it to the wider integer type of u64, resulting
in the following compiler warnings:
kernel/signal.c: In function 'copy_siginfo_to_user':
kernel/signal.c:2752:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
kernel/signal.c:2752:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
[...]
This patch fixes the warnings by removing the marshalling code and using
the correct output modifiers in the __put_{user,kernel}_asm64 macros
so that GCC will allocate the right registers without the need to
extract the two words explicitly.
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Change kunmap macro to static inline function to fix build error
compiling drivers/base/dma-buf.c.
Without the change, the following error can occur:
CC drivers/base/dma-buf.o
drivers/base/dma-buf.c: In function 'dma_buf_kunmap':
drivers/base/dma-buf.c:427:46:
error: macro "kunmap" passed 3 arguments, but takes just 1
I believe parisc is the only arch to implement kunmap using a macro.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
The Debian experimental linux source package (3.8.5-1) build fails
with the following errors:
...
MODPOST 2016 modules
ERROR: "__ucmpdi2" [fs/btrfs/btrfs.ko] undefined!
ERROR: "__ucmpdi2" [drivers/md/dm-verity.ko] undefined!
The attached patch resolves this problem. It is based on the s390
implementation of ucmpdi2.c.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Signed-off-by: Helge Deller <deller@gmx.de>
The Kconfig entry for USB_EHCI_MSM unconditionally selects USB_MSM_OTG,
which is now only visible when USB_PHY is also enabled.
This adds an appropriate dependency and enables USB_PHY in the msm
defconfig, avoiding the Kbuild warning:
warning: (USB_EHCI_MSM) selects USB_MSM_OTG which has unmet direct dependencies (USB_SUPPORT && USB_PHY && (USB || USB_GADGET) && ARCH_MSM)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Like the EHCI driver, OHCI supports a large number of different platform
glue drivers by directly including them, which causes problems with
conflicting macro definitions in some cases. As more ARM architecture
specific back-ends are required to coexist in a single build, we should
split those out into separate drivers. Unfortunately, the infrastructure
for that is still under development, so to give us more time, this uses
a separate *_PLATFORM_DRIVER macro for each ARM specific OHCI backend,
just like we already do on PowerPC and some of the other ARM platforms.
In linux-3.10, only the SPEAr and CNS3xxx back-ends would actually conflict
without this patch, but over time we would get more of them, so this
is a way to avoid having to patch the driver every time it breaks. We
should still split out all back-ends into separate loadable modules,
but that work is only needed to improve code size and cleanliness after
this patch, not for correctness.
While we're here, this fixes the incorrectly sorted error path
for the OMAP1 and OMAP3 backends to ensure we always unregister
the exact set of drivers that were registered before erroring out.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Kconfig entry for USB_OMAP unconditionally selects USB_ISP1301,
which is now only visible when USB_PHY is also enabled.
This adds an appropriate dependency and enables USB_PHY in the omap1
defconfig, avoiding these build warnings:
warning: (USB_OHCI_HCD && USB_OMAP) selects ISP1301_OMAP which has unmet direct dependencies (USB_SUPPORT && USB_PHY && I2C && ARCH_OMAP_OTG)
Also fix a Makefile typo while we're at it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Kconfig entry for USB_LPC32XX unconditionally selects USB_ISP1301,
which is now only visible when USB_PHY is also enabled.
This adds an appropriate dependency and enables USB_PHY in the msm
defconfig, avoiding these build errors:
warning: (USB_LPC32XX) selects USB_ISP1301 which has unmet direct dependencies (USB_SUPPORT && USB_PHY && (USB || USB_GADGET) && I2C)
drivers/built-in.o: In function `usb_hcd_nxp_probe':
drivers/usb/host/ohci-nxp.c:224: undefined reference to `isp1301_get_client'
drivers/built-in.o: In function `lpc32xx_udc_probe':
drivers/usb/gadget/lpc32xx_udc.c:3071: undefined reference to `isp1301_get_client'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Roland Stigge <stigge@antcom.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull sparc fix from David Miller:
"Brown paper bag fix for sparc64"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Fix missing put_cpu_var() in tlb_batch_add_one() when not batching.
Dunn noticed breakage on some older PXA machines due to
moving PXA GPIO initcalls to the module_init initlevel.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=Xxmm
-----END PGP SIGNATURE-----
Merge tag 'gpio-v3.9-lastminute' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull gpi fix from Linus Walleij:
"This is a last minute revert for the GPIO tree, as Mike Dunn noticed
breakage on some older PXA machines due to moving PXA GPIO initcalls
to the module_init initlevel"
* tag 'gpio-v3.9-lastminute' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
Revert "gpio: pxa: set initcall level to module init"
This reverts commit 6c7e660a27.
The commit causes breakage on several older PXA machines.
Reported-by: Mike Dunn <mikedunn@newsguy.com>
Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pci/gavin-msi-cleanup:
vfio-pci: Use cached MSI/MSI-X capabilities
vfio-pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK
PCI: Remove "extern" from function declarations
PCI: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK
PCI: Drop msi_mask_reg() and remove drivers/pci/msi.h
PCI: Use msix_table_size() directly, drop multi_msix_capable()
PCI: Drop msix_table_offset_reg() and msix_pba_offset_reg() macros
PCI: Drop is_64bit_address() and is_mask_bit_support() macros
PCI: Drop msi_data_reg() macro
PCI: Drop msi_lower_address_reg() and msi_upper_address_reg() macros
PCI: Drop msi_control_reg() macro and use PCI_MSI_FLAGS directly
PCI: Use cached MSI/MSI-X offsets from dev, not from msi_desc
PCI: Clean up MSI/MSI-X capability #defines
PCI: Use cached MSI-X cap while enabling MSI-X
PCI: Use cached MSI cap while enabling MSI interrupts
PCI: Remove MSI/MSI-X cap check in pci_msi_check_device()
PCI: Cache MSI/MSI-X capability offsets in struct pci_dev
PCI: Use u8, not int, for PM capability offset
[SCSI] megaraid_sas: Use correct #define for MSI-X capability
We now cache the MSI/MSI-X capability offsets in the struct pci_dev,
so no need to find the capabilities again.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
PCI_MSIX_FLAGS_BIRMASK is mis-named because the BIR mask is in the
Table Offset register, not the flags ("Message Control" per spec)
register.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
The FT4232H used in the ST Micro Connect Lite has four hi-speed UART ports.
The first two ports are reserved for the JTAG interface.
We enable by default ports 2 and 3 as UARTs (where port 2 is a
conventional RS-232 UART)
Signed-off-by: Adrian Thomasset <adrian.thomasset@st.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fsreeze does not work for iso9660 filesystems. A ENOSUPP may be caught
in the freeze case, but the subsequent thaw call would fail and leads to
a false error.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As suggested by Paolo Bonzini, use ioctl instead of calling fsfreeze.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As suggested by Paolo Bonzini, use getmntent instead of parsing output
of mount(1).
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Similar to what commit 95a69adab9 ("tools:
hv: Netlink source address validation allows DoS") does in
hv_kvp_daemon, improve checks for origin of netlink connector message.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This change fixes a few compile errors:
hv_vss_daemon.c:64:15: warning: unknown escape sequence '\/'
hv_vss_daemon.c:64:15: warning: unknown escape sequence '\/'
hv_vss_daemon.c: In function 'vss_operate':
hv_vss_daemon.c:66: warning: 'return' with no value, in function returning non-void
hv_vss_daemon.c: In function 'main':
hv_vss_daemon.c:130: warning: ignoring return value of 'daemon', declared with attribute warn_unused_result
hv_vss_daemon.c: In function 'vss_operate':
hv_vss_daemon.c:47: warning: 'fs_op' may be used uninitialized in this function
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need to check the runtime sys_table for the EFI version the firmware
specifies instead of just checking for a NULL QueryVariableInfo. Older
implementations of EFI don't have QueryVariableInfo but the runtime is
a smaller structure, so the pointer to it may be pointing off into garbage.
This is apparently the case with several Apple firmwares that support EFI
1.10, and the current check causes them to no longer boot. Fix based on
a suggestion from Matthew Garrett.
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Fix this:
arch/x86/boot/compressed/eboot.c: In function ‘setup_efi_vars’:
arch/x86/boot/compressed/eboot.c:269:2: warning: passing argument 1 of ‘efi_call_phys’ makes pointer from integer without a cast [enabled by default]
In file included from arch/x86/boot/compressed/eboot.c:12:0:
/w/kernel/linux/arch/x86/include/asm/efi.h:8:33: note: expected ‘void *’ but argument is of type ‘long unsigned int’
after cc5a080c5d ("efi: Pass boot services variable info to runtime
code").
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Use vm_iomap_memory() instead of [io_]remap_pfn_range().
vm_iomap_memory() gives us much simpler API to map memory to userspace,
and reduces possibilities for bugs.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Use vm_iomap_memory() instead of [io_]remap_pfn_range().
vm_iomap_memory() gives us much simpler API to map memory to userspace,
and reduces possibilities for bugs.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Alan Hourihane <alanh@fairlite.demon.co.uk>
Use vm_iomap_memory() instead of [io_]remap_pfn_range().
vm_iomap_memory() gives us much simpler API to map memory to userspace,
and reduces possibilities for bugs.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Use vm_iomap_memory() instead of [io_]remap_pfn_range().
vm_iomap_memory() gives us much simpler API to map memory to userspace,
and reduces possibilities for bugs.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Use vm_iomap_memory() instead of [io_]remap_pfn_range().
vm_iomap_memory() gives us much simpler API to map memory to userspace,
and reduces possibilities for bugs.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Use vm_iomap_memory() instead of [io_]remap_pfn_range().
vm_iomap_memory() gives us much simpler API to map memory to userspace,
and reduces possibilities for bugs.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
CONFIG_COMEDI_NI_LABPC_ISA is a tristate option. #if IS_ENABLED()
needs to be used instead of #ifdef in order to build the legacy
specific code in this driver.
The local variable 'board' is not used in labpc_attach(). Remove it.
The labpc_detach() function is only referenced in this file. Make
it static.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both phy-tegra-usb.c and ehci-tegra.c export symbols used by the other one,
which does not work if one of them or both are loadable modules, resulting
in an error like:
drivers/built-in.o: In function `utmi_phy_clk_disable':
drivers/usb/phy/phy-tegra-usb.c:302: undefined reference to `tegra_ehci_set_phcd'
drivers/built-in.o: In function `utmi_phy_clk_enable':
drivers/usb/phy/phy-tegra-usb.c:324: undefined reference to `tegra_ehci_set_phcd'
drivers/built-in.o: In function `utmi_phy_power_on':
drivers/usb/phy/phy-tegra-usb.c:447: undefined reference to `tegra_ehci_set_pts'
This turns the interface into a one-way dependency by letting the tegra ehci
driver pass two function pointers for callbacks that need to be called by
the phy driver.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Venu Byravarasu <vbyravarasu@nvidia.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes building the sirfsorc-uart driver as a loadable module,
which uses an incorrect MODULE_DEVICE_TABLE, by changing the reference to the
correct symbol.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleanup the comments about the cio-das802/16 specific register
defines. This also removes a checkpatch.pl warning about > 80
char lines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
