If ext_debugging is enabled and path[depth].p_ext is NULL, len
and lblock are printed non initialized
Signed-off-by: Andi Shyti <andi@etezian.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Don't emit OOM warnings when k.alloc calls fail when
there there is a v.alloc immediately afterwards.
Converted a kmalloc/vmalloc with memset to kzalloc/vzalloc.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The following race can lead to a loss of i_disksize update from truncate
thus resulting in a wrong inode size if the inode size isn't updated
again before inode is reclaimed:
ext4_setattr() mpage_map_and_submit_extent()
EXT4_I(inode)->i_disksize = attr->ia_size;
... ...
disksize = ((loff_t)mpd->first_page) << PAGE_CACHE_SHIFT
/* False because i_size isn't
* updated yet */
if (disksize > i_size_read(inode))
/* True, because i_disksize is
* already truncated */
if (disksize > EXT4_I(inode)->i_disksize)
/* Overwrite i_disksize
* update from truncate */
ext4_update_i_disksize()
i_size_write(inode, attr->ia_size);
For other places updating i_disksize such race cannot happen because
i_mutex prevents these races. Writeback is the only place where we do
not hold i_mutex and we cannot grab it there because of lock ordering.
We fix the race by doing both i_disksize and i_size update in truncate
atomically under i_data_sem and in mpage_map_and_submit_extent() we move
the check against i_size under i_data_sem as well.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Merge conditions in ext4_setattr() handling inode size changes, also
move ext4_begin_ordered_truncate() call somewhat earlier because it
simplifies error recovery in case of failure. Also add error handling in
case i_disksize update fails.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Inode size can arbitrarily change while writeback is in progress. When
ext4_writepages() has prepared a long extent for mapping and truncate
then reduces i_size, mpage_map_and_submit_buffers() will always map just
one buffer in a page instead of all of them due to lblk < blocks check.
So we end up not using all blocks we've allocated (thus leaking them)
and also delalloc accounting goes wrong manifesting as a warning like:
ext4_da_release_space:1333: ext4_da_release_space: ino 12, to_free 1
with only 0 reserved data blocks
Note that the problem can happen only when blocksize < pagesize because
otherwise we have only a single buffer in the page.
Fix the problem by removing the size check from the mapping loop. We
have an extent allocated so we have to use it all before checking for
i_size. We also rename add_page_bufs_to_extent() to
mpage_process_page_bufs() and make that function submit the page for IO
if all buffers (upto EOF) in it are mapped.
Reported-by: Dave Jones <davej@redhat.com>
Reported-by: Zheng Liu <gnehzuil.liu@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Currently the logic whether the current buffer can be added to an extent
of buffers to map is split between mpage_add_bh_to_extent() and
add_page_bufs_to_extent(). Move the whole logic to
mpage_add_bh_to_extent() which makes things a bit more straightforward
and make following i_size fixes easier.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
reaim workfile.dbase test easily triggers warning in
ext4_da_update_reserve_space():
EXT4-fs warning (device ram0): ext4_da_update_reserve_space:365:
ino 12, allocated 1 with only 0 reserved metadata blocks (releasing 1
blocks with reserved 9 data blocks)
The problem is that (one of) tests creates file and then randomly writes
to it with O_SYNC. That results in writing back pages of the file in
random order so we create extents for written blocks say 0, 2, 4, 6, 8
- this last allocation also allocates new block for extents. Then we
writeout block 1 so we have extents 0-2, 4, 6, 8 and we release
indirect extent block because extents fit in the inode again. Then we
writeout block 10 and we need to allocate indirect extent block again
which triggers the warning because we don't have the reservation
anymore.
Fix the problem by giving back freed metadata blocks resulting from
extent merging into inode's reservation pool.
Signed-off-by: Jan Kara <jack@suse.cz>
In no journal mode, if an inode has recently been deleted, we
shouldn't reuse it right away. Otherwise it's possible, after an
unclean shutdown, to hit a situation where a recently deleted inode
gets reused for some other purpose before the inode table block has
been written to disk. However, if the directory entry has been
updated, then the directory entry will be pointing at the old inode
contents.
E2fsck will make sure the file system is consistent after the
unclean shutdown. However, if the recently deleted inode is a
character mode device, or an inode with the immutable bit set, even
after the file system has been fixed up by e2fsck, it can be
possible for a *.pyc file to be pointing at a character mode
device, and when python tries to open the *.pyc file, Hilarity
Ensues. We could change all of userspace to be very suspicious
about stat'ing files before opening them, and clearing the
immutable flag if necessary --- or we can just avoid reusing an
inode number if it has been recently deleted.
Google-Bug-Id: 10017573
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When ext4_rename() overwrites an already existing file, call
ext4_alloc_da_blocks() before starting the journal handle which
actually does the rename, instead of doing this afterwards. This
improves the likelihood that the contents will survive a crash if an
application replaces a file using the sequence:
1) write replacement contents to foo.new
2) <omit fsync of foo.new>
3) rename foo.new to foo
It is still not a guarantee, since ext4_alloc_da_blocks() is *not*
doing a file integrity sync; this means if foo.new is a very large
file, it may not be completely flushed out to disk.
However, for files smaller than a megabyte or so, any dirty pages
should be flushed out before we do the rename operation, and so at the
next journal commit, the CACHE FLUSH command will make sure al of
these pages are safely on the disk platter.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In ext4_rename(), don't start the journal handle until the the
directory entries have been successfully looked up.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a new fiemap flag which forces the all of the extents in an inode
to be cached in the extent_status tree. This is critically important
when using AIO to a preallocated file, since if we need to read in
blocks from the extent tree, the io_submit(2) system call becomes
synchronous, and the AIO is no longer "A", which is bad.
In addition, for most files which have an external leaf tree block,
the cost of caching the information in the extent status tree will be
less than caching the entire 4k block in the buffer cache. So it is
generally a win to keep the extent information cached.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When we read in an extent tree leaf block from disk, arrange to have
all of its entries cached. In nearly all cases the in-memory
representation will be more compact than the on-disk representation in
the buffer cache, and it allows us to get the information without
having to traverse the extent tree for successive extents.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Don't use an unsigned long long for the es_status flags; this requires
that we pass 64-bit values around which is painful on 32-bit systems.
Instead pass the extent status flags around using the low 4 bits of an
unsigned int, and shift them into place when we are reading or writing
es_pblk.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
When we find an invalid extent tree block, report the block number of
the bad block for debugging purposes.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Refactor out the code needed to read the extent tree block into a
single read_extent_tree_block() function. In addition to simplifying
the code, it also makes sure that we call the ext4_ext_load_extent
tracepoint whenever we need to read an extent tree block from disk.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Commit 0713ed0cde added
jbd2_journal_file_inode() call into ext4_block_zero_page_range().
However that function gets called from truncate path and thus inode
needn't have jinode attached - that happens in ext4_file_open() but
the file needn't be ever open since mount. Calling
jbd2_journal_file_inode() without jinode attached results in the oops.
We fix the problem by attaching jinode to inode also in ext4_truncate()
and ext4_punch_hole() when we are going to zero out partial blocks.
Reported-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When jbd2_journal_dirty_metadata() returns error,
__ext4_handle_dirty_metadata() stops the handle. However callers of this
function do not count with that fact and still happily used now freed
handle. This use after free can result in various issues but very likely
we oops soon.
The motivation of adding __ext4_journal_stop() into
__ext4_handle_dirty_metadata() in commit 9ea7a0df seems to be only to
improve error reporting. So replace __ext4_journal_stop() with
ext4_journal_abort_handle() which was there before that commit and add
WARN_ON_ONCE() to dump stack to provide useful information.
Reported-by: Sage Weil <sage@inktank.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org # 3.2+
Previously we weren't swapping only some of the extent_status LRU
fields during the processing of the EXT4_IOC_SWAP_BOOT ioctl. The
much safer thing to do is to just completely flush the extent status
tree when doing the swap.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Zheng Liu <gnehzuil.liu@gmail.com>
Cc: stable@vger.kernel.org
Commit 5688978 ("ext4: improve handling of conflicting mount options")
introduced incorrect messages shown while choosing wrong mount options.
First of all, both cases of incorrect mount options,
"data=journal,delalloc" and "data=journal,dioread_nolock" result in
the same error message.
Secondly, the problem above isn't solved for remount option: the
mismatched parameter is simply ignored. Moreover, ext4_msg states
that remount with options "data=journal,delalloc" succeeded, which is
not true.
To fix it up, I added a simple check after parse_options() call to
ensure that data=journal and delalloc/dioread_nolock parameters are
not present at the same time.
Signed-off-by: Piotr Sarna <p.sarna@partner.samsung.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Commit 26092bf ("ext4: use a table-driven handler for mount options")
wrongly disallows the specifying the mount options nodelalloc and
data=journal simultaneously. This is incorrect; it should have only
disallowed the combination of delalloc and data=journal
simultaneously.
Reported-by: Piotr Sarna <p.sarna@partner.samsung.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
In commit 921f266b: ext4: add self-testing infrastructure to do a
sanity check, some sanity checks were added in map_blocks to make sure
'retval == map->m_len'.
Enable these checks by default and report any assertion failures using
ext4_warning() and WARN_ON() since they can help us to figure out some
bugs that are otherwise hard to hit.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When we try to allocate an inode, and there is a race between two
CPU's trying to grab the same inode, _and_ this inode is the last free
inode in the block group, make sure the group number is bumped before
we continue searching the rest of the block groups. Otherwise, we end
up searching the current block group twice, and we end up skipping
searching the last block group. So in the unlikely situation where
almost all of the inodes are allocated, it's possible that we will
return ENOSPC even though there might be free inodes in that last
block group.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=ngfz
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bugfixes from Ted Ts'o:
"Fixes for 3.11-rc2, sent at 5pm, in the professoinal style. :-)"
I'm not sure I like this new level of "professionalism".
9-5, people, 9-5.
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: call ext4_es_lru_add() after handling cache miss
ext4: yield during large unlinks
ext4: make the extent_status code more robust against ENOMEM failures
ext4: simplify calculation of blocks to free on error
ext4: fix error handling in ext4_ext_truncate()
If there are no items in the extent status tree, ext4_es_lru_add() is
a no-op. So it is not sufficient to call ext4_es_lru_add() before we
try to lookup an entry in the extent status tree. We also need to
call it at the end of ext4_ext_map_blocks(), after items have been
added to the extent status tree.
This could lead to inodes with that have extent status trees but which
are not in the LRU list, which means they won't get considered for
eviction by the es_shrinker.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Zheng Liu <wenqing.lz@taobao.com>
Cc: stable@vger.kernel.org
During large unlink operations on files with extents, we can use a lot
of CPU time. This adds a cond_resched() call when starting to examine
the next level of a multi-level extent tree. Multi-level extent trees
are rare in the first place, and this should rarely be executed.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=qf2h
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bugfixes from Ted Ts'o:
"Various regression and bug fixes for ext4"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: don't allow ext4_free_blocks() to fail due to ENOMEM
ext4: fix spelling errors and a comment in extent_status tree
ext4: rate limit printk in buffer_io_error()
ext4: don't show usrquota/grpquota twice in /proc/mounts
ext4: fix warning in ext4_evict_inode()
ext4: fix ext4_get_group_number()
ext4: silence warning in ext4_writepages()
Some callers of ext4_es_remove_extent() and ext4_es_insert_extent()
may not be completely robust against ENOMEM failures (or the
consequences of reflecting ENOMEM back up to userspace may lead to
xfstest or user application failure).
To mitigate against this, when trying to insert an entry in the extent
status tree, try to shrink the inode's extent status tree before
returning ENOMEM. If there are entries which don't record information
about extents under delayed allocations, freeing one of them is
preferable to returning ENOMEM.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
In ext4_ext_map_blocks(), if we have successfully allocated the data
blocks, but then run into trouble inserting the extent into the extent
tree, most likely due to an ENOSPC condition, determine the arguments
to ext4_free_blocks() in a simpler way which is easier to prove to be
correct.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Previously ext4_ext_truncate() was ignoring potential error returns
from ext4_es_remove_extent() and ext4_ext_remove_space(). This can
lead to the on-diks extent tree and the extent status tree cache
getting out of sync, which is particuarlly bad, and can lead to file
system corruption and potential data loss.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
The filesystem should not be marked inconsistent if ext4_free_blocks()
is not able to allocate memory. Unfortunately some callers (most
notably ext4_truncate) don't have a way to reflect an error back up to
the VFS. And even if we did, most userspace applications won't deal
with most system calls returning ENOMEM anyway.
Reported-by: Nagachandra P <nagachandra@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Replace "assertation" with "assertion" in lots and lots of debugging
messages.
Correct the comment stating when ext4_es_insert_extent() is used. It
was no doubt tree at one point, but it is no longer true...
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Zheng Liu <gnehzuil.liu@gmail.com>
If there are a lot of outstanding buffered IOs when a device is
taken offline (due to hardware errors etc), ext4_end_bio prints
out a message for each failed logical block. While this is desirable,
we see thousands of such lines being printed out before the
serial console gets overwhelmed, causing ext4_end_bio() wait for
the printk to complete.
This in itself isn't a disaster, except for the detail that this
function is being called with the queue lock held.
This causes any other function in the block layer
to spin on its spin_lock_irqsave while the serial console is
draining. If NMI watchdog is enabled on this machine then it
eventually comes along and shoots the machine in the head.
The end result is that losing any one disk causes the machine to
go down. This patch rate limits the printk to bandaid around the
problem.
Tested: xfstests
Change-Id: I8ab5690dcf4f3a67e78be147d45e489fdf4a88d8
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We now print mount options in a generic fashion in
ext4_show_options(), so we shouldn't be explicitly printing the
{usr,grp}quota options in ext4_show_quota_options().
Without this patch, /proc/mounts can look like this:
/dev/vdb /vdb ext4 rw,relatime,quota,usrquota,data=ordered,usrquota 0 0
^^^^^^^^ ^^^^^^^^
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
The following race can lead to ext4_evict_inode() seeing i_ioend_count
> 0 and thus triggering a sanity check warning:
CPU1 CPU2
ext4_end_bio() ext4_evict_inode()
ext4_finish_bio()
end_page_writeback();
truncate_inode_pages()
evict page
WARN_ON(i_ioend_count > 0);
ext4_put_io_end_defer()
ext4_release_io_end()
dec i_ioend_count
This is possible use-after-free bug since we decrement i_ioend_count in
possibly released inode.
Since i_ioend_count is used only for sanity checks one possible solution
would be to just remove it but for now I'd like to keep those sanity
checks to help debugging the new ext4 writeback code.
This patch changes ext4_end_bio() to call ext4_put_io_end_defer() before
ext4_finish_bio() in the shortcut case when unwritten extent conversion
isn't needed. In that case we don't need the io_end so we are safe to
drop it early.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The loop in mpage_map_and_submit_extent() is guaranteed to always run
at least once since the caller of mpage_map_and_submit_extent() makes
sure map->m_len > 0. So make that explicit using do-while instead of
pure while which also silences the compiler warning about
uninitialized 'err' variable.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Pull second set of VFS changes from Al Viro:
"Assorted f_pos race fixes, making do_splice_direct() safe to call with
i_mutex on parent, O_TMPFILE support, Jeff's locks.c series,
->d_hash/->d_compare calling conventions changes from Linus, misc
stuff all over the place."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
Document ->tmpfile()
ext4: ->tmpfile() support
vfs: export lseek_execute() to modules
lseek_execute() doesn't need an inode passed to it
block_dev: switch to fixed_size_llseek()
cpqphp_sysfs: switch to fixed_size_llseek()
tile-srom: switch to fixed_size_llseek()
proc_powerpc: switch to fixed_size_llseek()
ubi/cdev: switch to fixed_size_llseek()
pci/proc: switch to fixed_size_llseek()
isapnp: switch to fixed_size_llseek()
lpfc: switch to fixed_size_llseek()
locks: give the blocked_hash its own spinlock
locks: add a new "lm_owner_key" lock operation
locks: turn the blocked_list into a hashtable
locks: convert fl_link to a hlist_node
locks: avoid taking global lock if possible when waking up blocked waiters
locks: protect most of the file_lock handling with i_lock
locks: encapsulate the fl_link list handling
locks: make "added" in __posix_lock_file a bool
...
For those file systems(btrfs/ext4/ocfs2/tmpfs) that support
SEEK_DATA/SEEK_HOLE functions, we end up handling the similar
matter in lseek_execute() to update the current file offset
to the desired offset if it is valid, ceph also does the
simliar things at ceph_llseek().
To reduce the duplications, this patch make lseek_execute()
public accessible so that we can call it directly from the
underlying file systems.
Thanks Dave Chinner for this suggestion.
[AV: call it vfs_setpos(), don't bring the removed 'inode' argument back]
v2->v1:
- Add kernel-doc comments for lseek_execute()
- Call lseek_execute() in ceph->llseek()
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: Josef Bacik <jbacik@fusionio.com>
Cc: Ben Myers <bpm@sgi.com>
Cc: Ted Tso <tytso@mit.edu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Sage Weil <sage@inktank.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
category, of note is a fix for on-line resizing file systems where the
block size is smaller than the page size (i.e., file systems 1k blocks
on x86, or more interestingly file systems with 4k blocks on Power or
ia64 systems.)
In the cleanup category, the ext4's punch hole implementation was
significantly improved by Lukas Czerner, and now supports bigalloc
file systems. In addition, Jan Kara significantly cleaned up the
write submission code path. We also improved error checking and added
a few sanity checks.
In the optimizations category, two major optimizations deserve
mention. The first is that ext4_writepages() is now used for
nodelalloc and ext3 compatibility mode. This allows writes to be
submitted much more efficiently as a single bio request, instead of
being sent as individual 4k writes into the block layer (which then
relied on the elevator code to coalesce the requests in the block
queue). Secondly, the extent cache shrink mechanism, which was
introduce in 3.9, no longer has a scalability bottleneck caused by the
i_es_lru spinlock. Other optimizations include some changes to reduce
CPU usage and to avoid issuing empty commits unnecessarily.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=SwaI
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 update from Ted Ts'o:
"Lots of bug fixes, cleanups and optimizations. In the bug fixes
category, of note is a fix for on-line resizing file systems where the
block size is smaller than the page size (i.e., file systems 1k blocks
on x86, or more interestingly file systems with 4k blocks on Power or
ia64 systems.)
In the cleanup category, the ext4's punch hole implementation was
significantly improved by Lukas Czerner, and now supports bigalloc
file systems. In addition, Jan Kara significantly cleaned up the
write submission code path. We also improved error checking and added
a few sanity checks.
In the optimizations category, two major optimizations deserve
mention. The first is that ext4_writepages() is now used for
nodelalloc and ext3 compatibility mode. This allows writes to be
submitted much more efficiently as a single bio request, instead of
being sent as individual 4k writes into the block layer (which then
relied on the elevator code to coalesce the requests in the block
queue). Secondly, the extent cache shrink mechanism, which was
introduce in 3.9, no longer has a scalability bottleneck caused by the
i_es_lru spinlock. Other optimizations include some changes to reduce
CPU usage and to avoid issuing empty commits unnecessarily."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (86 commits)
ext4: optimize starting extent in ext4_ext_rm_leaf()
jbd2: invalidate handle if jbd2_journal_restart() fails
ext4: translate flag bits to strings in tracepoints
ext4: fix up error handling for mpage_map_and_submit_extent()
jbd2: fix theoretical race in jbd2__journal_restart
ext4: only zero partial blocks in ext4_zero_partial_blocks()
ext4: check error return from ext4_write_inline_data_end()
ext4: delete unnecessary C statements
ext3,ext4: don't mess with dir_file->f_pos in htree_dirblock_to_tree()
jbd2: move superblock checksum calculation to jbd2_write_superblock()
ext4: pass inode pointer instead of file pointer to punch hole
ext4: improve free space calculation for inline_data
ext4: reduce object size when !CONFIG_PRINTK
ext4: improve extent cache shrink mechanism to avoid to burn CPU time
ext4: implement error handling of ext4_mb_new_preallocation()
ext4: fix corruption when online resizing a fs with 1K block size
ext4: delete unused variables
ext4: return FIEMAP_EXTENT_UNKNOWN for delalloc extents
jbd2: remove debug dependency on debug_fs and update Kconfig help text
jbd2: use a single printk for jbd_debug()
...
Both hole punch and truncate use ext4_ext_rm_leaf() for removing
blocks. Currently we choose the last extent as the starting
point for removing blocks:
ex = EXT_LAST_EXTENT(eh);
This is OK for truncate but for hole punch we can optimize the extent
selection as the path is already initialized. We could use this
information to select proper starting extent. The code change in this
patch will not affect truncate as for truncate path[depth].p_ext will
always be NULL.
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Translate the bitfields used in various flags argument to strings to
make the tracepoint output more human-readable.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The function mpage_released_unused_page() must only be called once;
otherwise the kernel will BUG() when the second call to
mpage_released_unused_page() tries to unlock the pages which had been
unlocked by the first call.
Also restructure the error handling so that we only give up on writing
the dirty pages in the case of ENOSPC where retrying the allocation
won't help. Otherwise, a transient failure, such as a kmalloc()
failure in calling ext4_map_blocks() might cause us to give up on
those pages, leading to a scary message in /var/log/messages plus data
loss.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Currently if we pass range into ext4_zero_partial_blocks() which covers
entire block we would attempt to zero it even though we should only zero
unaligned part of the block.
Fix this by checking whether the range covers the whole block skip
zeroing if so.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The function ext4_write_inline_data_end() can return an error. So we
need to assign it to a signed integer variable to check for an error
return (since copied is an unsigned int).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Zheng Liu <wenqing.lz@taobao.com>
Cc: stable@vger.kernel.org
Both ext3 and ext4 htree_dirblock_to_tree() is just filling the
in-core rbtree for use by call_filldir(). All updates of ->f_pos are
done by the latter; bumping it here (on error) is obviously wrong - we
might very well have it nowhere near the block we'd found an error in.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
No need to pass file pointer when we can directly pass inode pointer.
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In ext4 feature inline_data,it use the xattr's space to store the
inline data in inode.When we calculate the inline data as the xattr,we
add the pad.But in get_max_inline_xattr_value_size() function we count
the free space without pad.It cause some contents are moved to a block
even if it can be
stored in the inode.
Signed-off-by: liulei <lewis.liulei@huawei.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Tao Ma <boyu.mt@taobao.com>
Reduce the object size ~10% could be useful for embedded systems.
Add #ifdef CONFIG_PRINTK #else #endif blocks to hold formats and
arguments, passing " " to functions when !CONFIG_PRINTK and still
verifying format and arguments with no_printk.
$ size fs/ext4/built-in.o*
text data bss dec hex filename
239375 610 888 240873 3ace9 fs/ext4/built-in.o.new
264167 738 888 265793 40e41 fs/ext4/built-in.o.old
$ grep -E "CONFIG_EXT4|CONFIG_PRINTK" .config
# CONFIG_PRINTK is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Now we maintain an proper in-order LRU list in ext4 to reclaim entries
from extent status tree when we are under heavy memory pressure. For
keeping this order, a spin lock is used to protect this list. But this
lock burns a lot of CPU time. We can use the following steps to trigger
it.
% cd /dev/shm
% dd if=/dev/zero of=ext4-img bs=1M count=2k
% mkfs.ext4 ext4-img
% mount -t ext4 -o loop ext4-img /mnt
% cd /mnt
% for ((i=0;i<160;i++)); do truncate -s 64g $i; done
% for ((i=0;i<160;i++)); do cp $i /dev/null &; done
% perf record -a -g
% perf report
This commit tries to fix this problem. Now a new member called
i_touch_when is added into ext4_inode_info to record the last access
time for an inode. Meanwhile we never need to keep a proper in-order
LRU list. So this can avoid to burns some CPU time. When we try to
reclaim some entries from extent status tree, we use list_sort() to get
a proper in-order list. Then we traverse this list to discard some
entries. In ext4_sb_info, we use s_es_last_sorted to record the last
time of sorting this list. When we traverse the list, we skip the inode
that is newer than this time, and move this inode to the tail of LRU
list. When the head of the list is newer than s_es_last_sorted, we will
sort the LRU list again.
In this commit, we break the loop if s_extent_cache_cnt == 0 because
that means that all extents in extent status tree have been reclaimed.
Meanwhile in this commit, ext4_es_{un}register_shrinker()'s prototype is
changed to save a local variable in these functions.
Reported-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If memory allocation in ext4_mb_new_group_pa() is failed,
it returns error code, ext4_mb_new_preallocation() propages it,
but ext4_mb_new_blocks() ignores it.
An observed result was:
- allocation fail means ext4_mb_new_group_pa() does not update
ext4_allocation_context;
- ext4_mb_new_blocks() sets ext4_allocation_request->len (ar->len =
ac->ac_b_ex.fe_len;) to number of blocks preallocated (512) instead
of number of blocks requested (1);
- that activates update cycle in ext4_splice_branch():
for (i = 1; i < blks; i++) <-- blks is 512 instead of 1 here
*(where->p + i) = cpu_to_le32(current_block++);
- it iterates 511 times and corrupts a chunk of memory including inode
structure;
- page fault happens at EXT4_SB(inode->i_sb) in ext4_mark_inode_dirty();
- system hangs with 'scheduling while atomic' BUG.
The patch implements a check for ext4_mb_new_preallocation() error
code and handles its failure as if ext4_mb_regular_allocator() fails.
Found by Linux File System Verification project (linuxtesting.org).
[ Patch restructed by tytso to make the flow of control easier to follow. ]
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Subtracting the number of the first data block places the superblock
backups one block too early, corrupting the file system. When the block
size is larger than 1K, the first data block is 0, so the subtraction
has no effect and no corruption occurs.
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
CC: stable@vger.kernel.org
Return the FIEMAP_EXTENT_UNKNOWN flag as well except the
FIEMAP_EXTENT_DELALLOC because the data location of an
delayed allocation extent is unknown.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
If filesystem was aborted after inode's write back is complete
but before its metadata was updated we may return success
results in data loss.
In order to handle fs abort correctly we have to check
fs state once we discover that it is in MS_RDONLY state
Test case: http://patchwork.ozlabs.org/patch/244297
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Inode's data or non journaled quota may be written w/o jounral so we
_must_ send a barrier at the end of ext4_sync_fs. But it can be
skipped if journal commit will do it for us.
Also fix data integrity for nojournal mode.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit 18888cf088: "ext4: speed up truncate/unlink by not using
bforget() unless needed" removed the use of EXT4_FREE_BLOCKS_FORGET in
the most important codepath for file systems using extents, but a
similar optimization also can be done for file systems using indirect
blocks, and for the two special cases in the ext4 extents code.
Cc: Andrey Sidorov <qrxd43@motorola.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For a file systems with a very large number of block groups, if all of
the block group bitmaps are in memory and the file system is
relatively badly fragmented, it's possible ext4_mb_regular_allocator()
to take a long time trying to find a good match. This is especially
true if the tuning parameter mb_max_to_scan has been sent to a very
large number. So add a cond_resched() to avoid soft lockup warnings
and to provide better system responsiveness.
For ext4_free_blocks(), if we are deleting a large range of blocks,
and data=journal is enabled so that EXT4_FREE_BLOCKS_FORGET is passed,
the loop to call sb_find_get_block() and to call ext4_forget() can
take over 10-15 milliseocnds or more. So it's better to add a
cond_resched() here a well.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Rename ext4_da_writepages() to ext4_writepages() and use it for all
modes. We still need to iterate over all the pages in the case of
data=journalling, but in the case of nodelalloc/data=ordered (which is
what file systems mounted using ext3 backwards compatibility will use)
this will allow us to use a much more efficient I/O submission path.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The test_root() function could potentially loop forever due to
overflow issues. So rewrite test_root() to avoid this issue; as a
bonus, it is 38% faster when benchmarked via a test loop:
int main(int argc, char **argv)
{
int i;
for (i = 0; i < 1 << 24; i++) {
if (test_root(i, 7))
printf("%d\n", i);
}
}
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The group number passed to ext4_get_group_info() should be valid, but
let's add an assert to check this before we start creating a pointer
based on that group number and dereferencing it.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Check the group number for sanity earilier, before calling routines
such as ext4_bg_has_super() or ext4_group_overhead_blocks().
Reported-by: Jonathan Salwan <jonathan.salwan@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Now that we clear PageWriteback after extent conversion, there's no
need to wait for io_end processing in ext4_evict_inode(). Running
AIO/DIO keeps file reference until aio_complete() is called so
ext4_evict_inode() cannot be called. For io_end structures resulting
from buffered IO waiting is happening because we wait for
PageWriteback in truncate_inode_pages().
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We don't have to wait for extent conversion in ext4_punch_hole() as
buffered IO for the punched range has been flushed and waited upon
(thus all extent conversions for that range have completed). Also we
wait for all DIO to finish using inode_dio_wait() so there cannot be
any extent conversions pending due to direct IO.
Also remove ext4_flush_unwritten_io() since it's unused now.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We don't have to wait for unwritten extent conversion in
ext4_ind_direct_IO() as all writes that happened before DIO are
flushed by the generic code and extent conversion has happened before
we cleared PageWriteback bit.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
After removal of ext4_flush_unwritten_io() call, ext4_file_sync()
doesn't need i_mutex anymore. Forcing of transaction commits doesn't
need i_mutex as there's nothing inode specific in that code apart from
grabbing transaction ids from the inode. So remove the lock.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Just use the generic function instead of duplicating it. We only need
to reshuffle the read-only check a bit (which is there to prevent
writing to a filesystem which has been remounted read-only after error
I assume).
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Since PageWriteback bit is now cleared after extents are converted
from unwritten to written ones, we have full exclusion of writeback
path from truncate (truncate_inode_pages() waits for PageWriteback
bits to get cleared on all invalidated pages). Exclusion from DIO
path is achieved by inode_dio_wait() call in ext4_setattr(). So
there's no need to wait for extent convertion in ext4_truncate()
anymore.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Make sure extent conversion after DIO happens while i_dio_count is
still elevated so that inode_dio_wait() waits until extent conversion
is done. This removes the need for explicit waiting for extent
conversion in some cases.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently PageWriteback bit gets cleared from put_io_page() called
from ext4_end_bio(). This is somewhat inconvenient as extent tree is
not fully updated at that time (unwritten extents are not marked as
written) so we cannot read the data back yet. This design was
dictated by lock ordering as we cannot start a transaction while
PageWriteback bit is set (we could easily deadlock with
ext4_da_writepages()). But now that we use transaction reservation
for extent conversion, locking issues are solved and we can move
PageWriteback bit clearing after extent conversion is done. As a
result we can remove wait for unwritten extent conversion from
ext4_sync_file() because it already implicitely happens through
wait_on_page_writeback().
We implement deferring of PageWriteback clearing by queueing completed
bios to appropriate io_end and processing all the pages when io_end is
going to be freed instead of at the moment ext4_io_end() is called.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Now that we have extent conversions with reserved transaction, we have
to prevent extent conversions without reserved transaction (from DIO
code) to block these (as that would effectively void any transaction
reservation we did). So split lists, work items, and work queues to
reserved and unreserved parts.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Later we would like to clear PageWriteback bit only after extent
conversion from unwritten to written extents is performed. However it
is not possible to start a transaction after PageWriteback is set
because that violates lock ordering (and is easy to deadlock). So we
have to reserve a transaction before locking pages and sending them
for IO and later we use the transaction for extent conversion from
ext4_end_io().
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There isn't any need for setting BH_Uninit on buffers anymore. It was
only used to signal we need to mark io_end as needing extent
conversion in add_bh_to_extent() but now we can mark the io_end
directly when mapping extent.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There are two issues with current writeback path in ext4. For one we
don't necessarily map complete pages when blocksize < pagesize and
thus needn't do any writeback in one iteration. We always map some
blocks though so we will eventually finish mapping the page. Just if
writeback races with other operations on the file, forward progress is
not really guaranteed. The second problem is that current code
structure makes it hard to associate all the bios to some range of
pages with one io_end structure so that unwritten extents can be
converted after all the bios are finished. This will be especially
difficult later when io_end will be associated with reserved
transaction handle.
We restructure the writeback path to a relatively simple loop which
first prepares extent of pages, then maps one or more extents so that
no page is partially mapped, and once page is fully mapped it is
submitted for IO. We keep all the mapping and IO submission
information in mpage_da_data structure to somewhat reduce stack usage.
Resulting code is somewhat shorter than the old one and hopefully also
easier to read.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We limit the number of blocks written in a single loop of
ext4_da_writepages() to 64 when inode uses indirect blocks. That is
unnecessary as credit estimates for mapping logically continguous run
of blocks is rather low even for inode with indirect blocks. So just
lift this limitation and properly calculate the number of necessary
credits.
This better credit estimate will also later allow us to always write
at least a single page in one iteration.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4_ind_trans_blocks() wrongly used 'chunk' argument to decide whether
blocks mapped are logically contiguous. That is wrong since the argument
informs whether the blocks are physically contiguous. As the blocks
mapped are always logically contiguous and that's all
ext4_ind_trans_blocks() cares about, just remove the 'chunk' argument.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This attribute is now unused so deprecate it. We still show the old
default value to keep some compatibility but we don't allow writing to
that attribute anymore.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Writeback code got better in how it submits IO and now the number of
pages requested to be written is usually higher than original 1024.
The number is now dynamically computed based on observed throughput
and is set to be about 0.5 s worth of writeback. E.g. on ordinary
SATA drive this ends up somewhere around 10000 as my testing shows.
So remove the unnecessary smarts from ext4_da_writepages().
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In some cases we cannot start a transaction because of locking
constraints and passing started transaction into those places is not
handy either because we could block transaction commit for too long.
Transaction reservation is designed to solve these issues. It
reserves a handle with given number of credits in the journal and the
handle can be later attached to the running transaction without
blocking on commit or checkpointing. Reserved handles do not block
transaction commit in any way, they only reduce maximum size of the
running transaction (because we have to always be prepared to
accomodate request for attaching reserved handle).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change writeback path to create just one io_end structure for the
extent to which we submit IO and share it among bios writing that
extent. This prevents needless splitting and joining of unwritten
extents when they cannot be submitted as a single bio.
Bugs in ENOMEM handling found by Linux File System Verification project
(linuxtesting.org) and fixed by Alexey Khoroshilov
<khoroshilov@ispras.ru>.
CC: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The arithmetics adding delalloc blocks to the number of used blocks in
ext4_getattr() can easily overflow on 32-bit archs as we first multiply
number of blocks by blocksize and then divide back by 512. Make the
arithmetics more clever and also use proper type (unsigned long long
instead of unsigned long).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
On 32-bit architectures with 32-bit sector_t computation of data offset
in ext4_xattr_fiemap() can overflow resulting in reporting bogus data
location. Fix the problem by typing block number to proper type before
shifting.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_lblk_t is just u32 so multiplying it by blocksize can easily
overflow for files larger than 4 GB. Fix that by properly typing the
block offsets before shifting.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
On 32-bit archs when sector_t is defined as 32-bit the logic computing
data offset in ext4_inline_data_fiemap(). Fix that by properly typing
the shifted value.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Suppress the messages releating to processing the ext4 orphan list
("truncating inode" and "deleting unreferenced inode") unless the
debug option is on, since otherwise they end up taking up space in the
log that could be used for more useful information.
Tested by opening several files, unlinking them, then
crashing the system, rebooting the system and examining
/var/log/messages.
Addresses the problem described in http://crbug.com/220976
Signed-off-by: Paul Taysom <taysom@chromium.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently punch hole is disabled in file systems with bigalloc
feature enabled. However the recent changes in punch hole patch should
make it easier to support punching holes on bigalloc enabled file
systems.
This commit changes partial_cluster handling in ext4_remove_blocks(),
ext4_ext_rm_leaf() and ext4_ext_remove_space(). Currently
partial_cluster is unsigned long long type and it makes sure that we
will free the partial cluster if all extents has been released from that
cluster. However it has been specifically designed only for truncate.
With punch hole we can be freeing just some extents in the cluster
leaving the rest untouched. So we have to make sure that we will notice
cluster which still has some extents. To do this I've changed
partial_cluster to be signed long long type. The only scenario where
this could be a problem is when cluster_size == block size, however in
that case there would not be any partial clusters so we're safe. For
bigger clusters the signed type is enough. Now we use the negative value
in partial_cluster to mark such cluster used, hence we know that we must
not free it even if all other extents has been freed from such cluster.
This scenario can be described in simple diagram:
|FFF...FF..FF.UUU|
^----------^
punch hole
. - free space
| - cluster boundary
F - freed extent
U - used extent
Also update respective tracepoints to use signed long long type for
partial_cluster.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The "head removal" branch in the condition is never used in any code
path in ext4 since the function only caller ext4_ext_rm_leaf() will make
sure that the extent is properly split before removing blocks. Note that
there is a bug in this branch anyway.
This commit removes the unused code completely and makes use of
ext4_error() instead of printk if dubious range is provided.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The discard_partial_page_buffers is no longer used anywhere so we can
simply remove it including the *_no_lock variant and
EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED define.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We're doing to get rid of ext4_discard_partial_page_buffers() since it is
duplicating some code and also partially duplicating work of
truncate_pagecache_range(), moreover the old implementation was much
clearer.
Now when the truncate_inode_pages_range() can handle truncating non page
aligned regions we can use this to invalidate and zero out block aligned
region of the punched out range and then use ext4_block_truncate_page()
to zero the unaligned blocks on the start and end of the range. This
will greatly simplify the punch hole code. Moreover after this commit we
can get rid of the ext4_discard_partial_page_buffers() completely.
We also introduce function ext4_prepare_punch_hole() to do come common
operations before we attempt to do the actual punch hole on
indirect or extent file which saves us some code duplication.
This has been tested on ppc64 with 1k block size with fsx and xfstests
without any problems.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently we do not tell mm to zero out tail of the page before truncate
in orphan_cleanup(). This is ok, because the page should not be
uptodate, however this may eventually change and I might cause problems.
Call truncate_inode_pages() as precautionary measure. Thanks Jan Kara
for pointing this out.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This reverts commit 189e868fa8.
This commit reintroduces the use of ext4_block_truncate_page() in ext4
truncate operation instead of ext4_discard_partial_page_buffers().
The statement in the commit description that the truncate operation only
zero block unaligned portion of the last page is not exactly right,
since truncate_pagecache_range() also zeroes and invalidate the unaligned
portion of the page. Then there is no need to zero and unmap it once more
and ext4_block_truncate_page() was doing the right job, although we
still need to update the buffer head containing the last block, which is
exactly what ext4_block_truncate_page() is doing.
Moreover the problem described in the commit is fixed more properly with
commit
15291164b2
jbd2: clear BH_Delay & BH_Unwritten in journal_unmap_buffer
This was tested on ppc64 machine with block size of 1024 bytes without
any problems.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In data=ordered mode we should call ext4_jbd2_file_inode() so that crash
after the truncate transaction has committed does not expose stall data
in the tail of the block.
Thanks Jan Kara for pointing that out.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This reverts commit ccb4d7af91.
This commit reintroduces functions ext4_block_truncate_page() and
ext4_block_zero_page_range() which has been previously removed in favour
of ext4_discard_partial_page_buffers().
In future commits we want to reintroduce those function and remove
ext4_discard_partial_page_buffers() since it is duplicating some code
and also partially duplicating work of truncate_pagecache_range(),
moreover the old implementation was much clearer.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
->invalidatepage() aop now accepts range to invalidate so we can make
use of it in all ext4 invalidatepage routines.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
invalidatepage now accepts range to invalidate and there are two file
system using jbd2 also implementing punch hole feature which can benefit
from this. We need to implement the same thing for jbd2 layer in order to
allow those file system take benefit of this functionality.
This commit adds length argument to the jbd2_journal_invalidatepage()
and updates all instances in ext4 and ocfs2.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Currently there is no way to truncate partial page where the end
truncate point is not at the end of the page. This is because it was not
needed and the functionality was enough for file system truncate
operation to work properly. However more file systems now support punch
hole feature and it can benefit from mm supporting truncating page just
up to the certain point.
Specifically, with this functionality truncate_inode_pages_range() can
be changed so it supports truncating partial page at the end of the
range (currently it will BUG_ON() if 'end' is not at the end of the
page).
This commit changes the invalidatepage() address space operation
prototype to accept range to be invalidated and update all the instances
for it.
We also change the block_invalidatepage() in the same way and actually
make a use of the new length argument implementing range invalidation.
Actual file system implementations will follow except the file systems
where the changes are really simple and should not change the behaviour
in any way .Implementation for truncate_page_range() which will be able
to accept page unaligned ranges will follow as well.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
regression) introduced during the 3.10-rc1 merge window. Also
included is a bug fix relating to allocating blocks after resizing an
ext3 file system when using the ext4 file system driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=6cRD
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 update from Ted Ts'o:
"Fixed regressions (two stability regressions and a performance
regression) introduced during the 3.10-rc1 merge window.
Also included is a bug fix relating to allocating blocks after
resizing an ext3 file system when using the ext4 file system driver"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
jbd,jbd2: fix oops in jbd2_journal_put_journal_head()
ext4: revert "ext4: use io_end for multiple bios"
ext4: limit group search loop for non-extent files
ext4: fix fio regression
This reverts commit 4eec708d26.
Multiple users have reported crashes which is apparently caused by
this commit. Thanks to Dmitry Monakhov for bisecting it.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: Jan Kara <jack@suse.cz>
Merge more incoming from Andrew Morton:
- Various fixes which were stalled or which I picked up recently
- A large rotorooting of the AIO code. Allegedly to improve
performance but I don't really have good performance numbers (I might
have lost the email) and I can't raise Kent today. I held this out
of 3.9 and we could give it another cycle if it's all too late/scary.
I ended up taking only the first two thirds of the AIO rotorooting. I
left the percpu parts and the batch completion for later. - Linus
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (33 commits)
aio: don't include aio.h in sched.h
aio: kill ki_retry
aio: kill ki_key
aio: give shared kioctx fields their own cachelines
aio: kill struct aio_ring_info
aio: kill batch allocation
aio: change reqs_active to include unreaped completions
aio: use cancellation list lazily
aio: use flush_dcache_page()
aio: make aio_read_evt() more efficient, convert to hrtimers
wait: add wait_event_hrtimeout()
aio: refcounting cleanup
aio: make aio_put_req() lockless
aio: do fget() after aio_get_req()
aio: dprintk() -> pr_debug()
aio: move private stuff out of aio.h
aio: add kiocb_cancel()
aio: kill return value of aio_complete()
char: add aio_{read,write} to /dev/{null,zero}
aio: remove retry-based AIO
...
same story as with the previous patches - note that return
value of blkdev_close() is lost, since there's nowhere the
caller (__fput()) could return it to.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In the case where we are allocating for a non-extent file,
we must limit the groups we allocate from to those below
2^32 blocks, and ext4_mb_regular_allocator() attempts to
do this initially by putting a cap on ngroups for the
subsequent search loop.
However, the initial target group comes in from the
allocation context (ac), and it may already be beyond
the artificially limited ngroups. In this case,
the limit
if (group == ngroups)
group = 0;
at the top of the loop is never true, and the loop will
run away.
Catch this case inside the loop and reset the search to
start at group 0.
[sandeen@redhat.com: add commit msg & comments]
Signed-off-by: Lachlan McIlroy <lmcilroy@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
We (Linux Kernel Performance project) found a regression introduced
by commit:
f7fec032aa ext4: track all extent status in extent status tree
The commit causes about 20% performance decrease in fio random write
test. Profiler shows that rb_next() uses a lot of CPU time. The call
stack is:
rb_next
ext4_es_find_delayed_extent
ext4_map_blocks
_ext4_get_block
ext4_get_block_write
__blockdev_direct_IO
ext4_direct_IO
generic_file_direct_write
__generic_file_aio_write
ext4_file_write
aio_rw_vect_retry
aio_run_iocb
do_io_submit
sys_io_submit
system_call_fastpath
io_submit
td_io_getevents
io_u_queued_complete
thread_main
main
__libc_start_main
The cause is that ext4_es_find_delayed_extent() doesn't have an
upper bound, it keeps searching until a delayed extent is found.
When there are a lots of non-delayed entries in the extent state
tree, ext4_es_find_delayed_extent() may uses a lot of CPU time.
Reported-by: LKP project <lkp@linux.intel.com>
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Pull VFS updates from Al Viro,
Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).
7kloc removed.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
don't bother with deferred freeing of fdtables
proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
proc: Make the PROC_I() and PDE() macros internal to procfs
proc: Supply a function to remove a proc entry by PDE
take cgroup_open() and cpuset_open() to fs/proc/base.c
ppc: Clean up scanlog
ppc: Clean up rtas_flash driver somewhat
hostap: proc: Use remove_proc_subtree()
drm: proc: Use remove_proc_subtree()
drm: proc: Use minor->index to label things, not PDE->name
drm: Constify drm_proc_list[]
zoran: Don't print proc_dir_entry data in debug
reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
proc: Supply an accessor for getting the data from a PDE's parent
airo: Use remove_proc_subtree()
rtl8192u: Don't need to save device proc dir PDE
rtl8187se: Use a dir under /proc/net/r8180/
proc: Add proc_mkdir_data()
proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
proc: Move PDE_NET() to fs/proc/proc_net.c
...
Due to a missing cast, the high 32-bits of a 64-bit block number used
when calculating the readahead block for inode tables can get lost.
This means we can end up fetching the wrong blocks for readahead for
file systems > 16TB.
Linus found this when experimenting with an enhacement to the sparse
static code checker which checks for missing widening casts before
binary "not" operators.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fox the Kconfig documentation for CONFIG_EXT4_DEBUG to match the
change made by commit a0b30c1229: ext4: use module parameters instead
of debugfs for mballoc_debug
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Commit fb0a387dcd restricts block allocations for indirect-mapped
files to block groups less than s_blockfile_groups. However, the
online resizing code wasn't setting s_blockfile_groups, so the newly
added block groups were not available for non-extent mapped files.
Reported-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
This allows metadata writebacks which are issued via block device
writeback to be sent with the current write request flags.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
As Dave Chinner pointed out at the 2013 LSF/MM workshop, it's
important that metadata I/O requests are marked as such to avoid
priority inversions caused by I/O bandwidth throttling.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Zach reported a problem that if inline data is enabled, we don't
tell the difference between the offset of '.' and '..'. And a
getdents will fail if the user only want to get '.'. And what's
worse, we may meet with duplicate dir entries as the offset
for inline dir and non-inline one is quite different.
This patch just try to resolve this problem if dir_index
is disabled. In this case, f_pos is the real offset with
the dir block, so for inline dir, we just pretend as if
we are a dir block and returns the offset like a norml
dir block does.
Reported-by: Zach Brown <zab@redhat.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Zach reported a problem that if inline data is enabled, we don't
tell the difference between the offset of '.' and '..'. And a
getdents will fail if the user only want to get '.' and what's worse,
if there is a conversion happens when the user calls getdents
many times, he/she may get the same entry twice.
In theory, a dir block would also fail if it is converted to a
hashed-index based dir since f_pos will become a hash value, not the
real one, but it doesn't happen. And a deep investigation shows that
we uses a hash based solution even for a normal dir if the dir_index
feature is enabled.
So this patch just adds a new htree_inlinedir_to_tree for inline dir,
and if we find that the hash index is supported, we will do like what
we do for a dir block.
Reported-by: Zach Brown <zab@redhat.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Inode allocation transaction is pretty heavy (246 credits with quotas
and extents before previous patch, still around 200 after it). This is
mostly due to credits required for allocation of quota structures
(credits there are heavily overestimated but it's difficult to make
better estimates if we don't want to wire non-trivial assumptions about
quota format into filesystem).
So move quota initialization out of allocation transaction. That way
transaction for quota structure allocation will be started only if we
need to look up quota structure on disk (rare) and furthermore it will
be started for each quota type separately, not for all of them at once.
This reduces maximum transaction size to 34 is most cases and to 73 in
the worst case.
[ Modified by tytso to clean up the cleanup paths for error handling.
Also use a separate call to ext4_std_error() for each failure so it
is easier for someone who is debugging a problem in this function to
determine which function call failed. ]
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Jan Kara <jack@suse.cz>
SUSE is carrying out of tree patches for Rich ACL support for ext4 as
they didn't get upstream due to opposition of some VFS maintainers.
Reserve xattr index for Rich ACLs so that it cannot be taken by
anything else which would force users to backup and reset their Rich
ACLs on files.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently noone cleared buffer_uninit flag. This results in writeback
needlessly marking io_end as needing extent conversion scanning extent
tree for extents to convert. So clear the buffer_uninit flag once the
buffer is submitted for IO and the flag is transformed into
EXT4_IO_END_UNWRITTEN flag.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Change writeback path to create just one io_end structure for the
extent to which we submit IO and share it among bios writing that
extent. This prevents needless splitting and joining of unwritten
extents when they cannot be submitted as a single bio.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
So far ext4_bio_write_page() attached all the pages to ext4_io_end
structure. This makes that structure pretty heavy (1 KB for pointers
+ 16 bytes per page attached to the bio). Also later we would like to
share ext4_io_end structure among several bios in case IO to a single
extent needs to be split among several bios and pointing to pages from
ext4_io_end makes this complex.
We remove page pointers from ext4_io_end and use pointers from bio
itself instead. This isn't as easy when blocksize < pagesize because
then we can have several bios in flight for a single page and we have
to be careful when to call end_page_writeback(). However this is a
known problem already solved by block_write_full_page() /
end_buffer_async_write() so we mimic its behavior here. We mark
buffers going to disk with BH_Async_Write flag and in
ext4_bio_end_io() we check whether there are any buffers with
BH_Async_Write flag left. If there are not, we can call
end_page_writeback().
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
In parse_strtoul() we're still using deprecated simple_strtoul(). Remove
parse_strtoul() altogether and replace it with kstrtoul()
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
- grab_cache_page_write_begin() may not wait on page's writeback since
(1d1d1a7672). But it is still reasonable to wait on page's writeback
here in order to be on the safe side.
- Fix miss typo: pass 'length' instead of 'end' to __block_write_begin()
https://bugzilla.kernel.org/show_bug.cgi?id=56241
TESTCASE: git://oss.sgi.com/xfs/cmds/xfstests.git
MKFS_OPTIONS="-b1024" ; ./check ext4/304
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Akira Fujita <a-fujita.rs.jp.nec.com>
With bigalloc feature enabled we do not support indirect addressing at all
so we have to prevent extent addressing to indirect addressing
conversion in this case. The problem has been introduced with the commit
"ext4: support simple conversion of extent-mapped inodes to use i_blocks"
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Move ext4_ind_migrate() into migrate.c file since it makes much more
sense and ext4_ext_migrate() is there as well.
Also fix tiny style problem - add spaces around "=" in "i=0".
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently in ENOSPC condition when writing into unwritten space, or
punching a hole, we might need to split the extent and grow extent tree.
However since we can not allocate any new metadata blocks we'll have to
zero out unwritten part of extent or punched out part of extent, or in
the worst case return ENOSPC even though use actually does not allocate
any space.
Also in delalloc path we do reserve metadata and data blocks for the
time we're going to write out, however metadata block reservation is
very tricky especially since we expect that logical connectivity implies
physical connectivity, however that might not be the case and hence we
might end up allocating more metadata blocks than previously reserved.
So in future, metadata reservation checks should be removed since we can
not assure that we do not under reserve.
And this is where reserved space comes into the picture. When mounting
the file system we slice off a little bit of the file system space (2%
or 4096 clusters, whichever is smaller) which can be then used for the
cases mentioned above to prevent costly zeroout, or unexpected ENOSPC.
The number of reserved clusters can be set via sysfs, however it can
never be bigger than number of free clusters in the file system.
Note that this patch fixes the failure of xfstest 274 as expected.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
The only part of proc_dir_entry the code outside of fs/proc
really cares about is PDE(inode)->data. Provide a helper
for that; static inline for now, eventually will be moved
to fs/proc, along with the knowledge of struct proc_dir_entry
layout.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Estimate of 27 credits for allocation of a block in extent based inode
is unnecessarily high. We can easily argue 20 is enough.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Improve mb_free_blocks speed by clearing entire range at once instead
of iterating over each bit. Freeing block-by-block also makes buddy
bitmap subtree flip twice making most of the work a no-op. Very few
bits in buddy bitmap require change, e.g. freeing entire group is a 1
bit flip only. As a result, releasing blocks of 60G file now takes
5ms instead of 2.7s. This is especially good for non-preemptive
kernels as there is no rescheduling during release.
Signed-off-by: Andrey Sidorov <qrxd43@motorola.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Values stored in s_freeclusters_counter and s_dirtyclusters_counter
are both in cluster units. Remove the cluster to block conversion
applied to s_freeclusters_counter causing an inflated estimate of
free space because s_dirtyclusters_counter is not similarly
converted. Rename free_blocks and dirty_blocks to better reflect
the units these variables contain to avoid future confusion. This
fix corrects ENOSPC failures for xfstests 127 and 231 on bigalloc
file systems.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We didn't mark hidden quota files with S_NOQUOTA flag and thus quota was
accounted even for quota files. Thus we could recurse back to quota code
when adding new blocks to quota file which can easily deadlock. Mark
hidden quota files properly.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
existing locking ordering: journal-> i_data_sem, but
ext4_ind_migrate() grab locks in opposite order which may result in
deadlock.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a new ioctl, EXT4_IOC_SWAP_BOOT which swaps i_blocks and
associated attributes (like i_blocks, i_size, i_flags, ...) from the
specified inode with inode EXT4_BOOT_LOADER_INO (#5). This is
typically used to store a boot loader in a secure part of the
filesystem, where it can't be changed by a normal user by accident.
The data blocks of the previous boot loader will be associated with
the given inode.
This usercode program is a simple example of the usage:
int main(int argc, char *argv[])
{
int fd;
int err;
if ( argc != 2 ) {
printf("usage: ext4-swap-boot-inode FILE-TO-SWAP\n");
exit(1);
}
fd = open(argv[1], O_WRONLY);
if ( fd < 0 ) {
perror("open");
exit(1);
}
err = ioctl(fd, EXT4_IOC_SWAP_BOOT);
if ( err < 0 ) {
perror("ioctl");
exit(1);
}
close(fd);
exit(0);
}
[ Modified by Theodore Ts'o to fix a number of bugs in the original code.]
Signed-off-by: Dr. Tilmann Bubeck <t.bubeck@reinform.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently when inserting extent in ext4_ext_insert_extent() we would
only try to to see if we can append new extent to the found extent. If
we can not, then we proceed with adding new extent into the extent tree,
but then possibly merging it back again.
We can avoid this situation by trying to append and prepend new extent
to the existing ones. However since the new extent can be on either
sides of the existing extent, we have to pick the right extent to try to
append/prepend to.
This patch adds the conditions to pick the right extent to
append/prepend to and adds the actual prepending condition as well. This
will also eliminate the need to use "reserved" block for possibly
growing extent tree.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently when converting extent to initialized we attempt to transfer
initialized block to the left neighbour if possible when certain
criteria are met. However we do not attempt to do the same for the
right neighbor.
This commit adds the possibility to transfer initialized block to the
right neighbour if:
1. We're not converting the whole extent
2. Both extents are stored in the same extent tree node
3. Right neighbor is initialized
4. Right neighbor is logically abutting the current one
5. Right neighbor is physically abutting the current one
6. Right neighbor would not overflow the length limit
This is basically the same logic as with transferring to the left. This
will gain us some performance benefits since it is faster than inserting
extent and then merging it.
It would also prevent some situation in delalloc patch when we might run
out of metadata reservation. This is due to the fact that we would
attempt to split the extent first (possibly allocating new metadata
block) even though we did not counted for that because it can (and will)
be merged again. This commit fix that scenario, because we no longer
need to split the extent in such case.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Currently on many places in ext4 we're using
ext4_get_group_no_and_offset() even though we're only interested in
knowing the block group of the particular block, not the offset within
the block group so we can use more efficient way to compute block
group.
This patch introduces ext4_get_group_number() which computes block
group for a given block much more efficiently. Use this function
instead of ext4_get_group_no_and_offset() everywhere where we're only
interested in knowing the block group.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently in when getting the block group number for a particular
block in ext4_block_in_group() we're using
ext4_get_group_no_and_offset() which uses do_div() to get the block
group and the remainer which is offset within the group.
We don't need all of that in ext4_block_in_group() as we only need to
figure out the group number.
This commit changes ext4_block_in_group() to calculate group number
directly. This shows as a big improvement with regards to cpu
utilization. Measuring fallocate -l 15T on fresh file system with perf
showed that 23% of cpu time was spend in the
ext4_get_group_no_and_offset(). With this change it completely
disappears from the list only bumping the occurrence of
ext4_init_block_bitmap() which is the biggest user of
ext4_block_in_group() by 4%. As the result of this change on my system
the fallocate call was approx. 10% faster.
However since there is '-g' option in mkfs which allow us setting
different groups size (mostly for developers) I've introduced new per
file system flag whether we have a standard block group size or
not. The flag is used to determine whether we can use the bit shift
optimization or not.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
It is incorrect to use list_for_each_entry_safe() for journal callback
traversial because ->next may be removed by other task:
->ext4_mb_free_metadata()
->ext4_mb_free_metadata()
->ext4_journal_callback_del()
This results in the following issue:
WARNING: at lib/list_debug.c:62 __list_del_entry+0x1c0/0x250()
Hardware name:
list_del corruption. prev->next should be ffff88019a4ec198, but was 6b6b6b6b6b6b6b6b
Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel microcode sg xhci_hcd button sd_mod crc_t10dif aesni_intel ablk_helper cryptd lrw aes_x86_64 xts gf128mul ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_mod
Pid: 16400, comm: jbd2/dm-1-8 Tainted: G W 3.8.0-rc3+ #107
Call Trace:
[<ffffffff8106fb0d>] warn_slowpath_common+0xad/0xf0
[<ffffffff8106fc06>] warn_slowpath_fmt+0x46/0x50
[<ffffffff813637e9>] ? ext4_journal_commit_callback+0x99/0xc0
[<ffffffff8148cae0>] __list_del_entry+0x1c0/0x250
[<ffffffff813637bf>] ext4_journal_commit_callback+0x6f/0xc0
[<ffffffff813ca336>] jbd2_journal_commit_transaction+0x23a6/0x2570
[<ffffffff8108aa42>] ? try_to_del_timer_sync+0x82/0xa0
[<ffffffff8108b491>] ? del_timer_sync+0x91/0x1e0
[<ffffffff813d3ecf>] kjournald2+0x19f/0x6a0
[<ffffffff810ad630>] ? wake_up_bit+0x40/0x40
[<ffffffff813d3d30>] ? bit_spin_lock+0x80/0x80
[<ffffffff810ac6be>] kthread+0x10e/0x120
[<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70
[<ffffffff818ff6ac>] ret_from_fork+0x7c/0xb0
[<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70
This patch fix the issue as follows:
- ext4_journal_commit_callback() make list truly traversial safe
simply by always starting from list_head
- fix race between two ext4_journal_callback_del() and
ext4_journal_callback_try_del()
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.com
In order to make it simpler to test the code which support
i_blocks/indirect-mapped inodes, support the conversion of inodes
which are less than 12 blocks and which are contained in no more than
a single extent.
The primary intended use of this code is to converting freshly created
zero-length files and empty directories.
Note that the version of chattr in e2fsprogs 1.42.7 and earlier has a
check that prevents the clearing of the extent flag. A simple patch
which allows "chattr -e <file>" to work will be checked into the
e2fsprogs git repository.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In the case where an inode has a very stale transaction id (tid) in
i_datasync_tid or i_sync_tid, it's possible that after a very large
(2**31) number of transactions, that the tid number space might wrap,
causing tid_geq()'s calculations to fail.
Commit deeeaf13 "jbd2: fix fsync() tid wraparound bug", later modified
by commit e7b04ac0 "jbd2: don't wake kjournald unnecessarily",
attempted to fix this problem, but it only avoided kjournald spinning
forever by fixing the logic in jbd2_log_start_commit().
Unfortunately, in the codepaths in fs/ext4/fsync.c and fs/ext4/inode.c
that might call jbd2_log_start_commit() with a stale tid, those
functions will subsequently call jbd2_log_wait_commit() with the same
stale tid, and then wait for a very long time. To fix this, we
replace the calls to jbd2_log_start_commit() and
jbd2_log_wait_commit() with a call to a new function,
jbd2_complete_transaction(), which will correctly handle stale tid's.
As a bonus, jbd2_complete_transaction() will avoid locking
j_state_lock for writing unless a commit needs to be started. This
should have a small (but probably not measurable) improvement for
ext4's scalability.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Reported-by: George Barnett <gbarnett@atlassian.com>
Cc: stable@vger.kernel.org
[ Added fixup from Lukáš Czerner which only checks the assertion when
the inode is not new and is not being freed. ]
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Move common code in ext4_ind_truncate() and ext4_ext_truncate() into
ext4_truncate(). This saves over 60 lines of code.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Move common code in ext4_ind_punch_hole() and ext4_ext_punch_hole()
into ext4_punch_hole(). This saves over 150 lines of code.
This also fixes a potential bug when the punch_hole() code is racing
against indirect-to-extents or extents-to-indirect migation. We are
currently using i_mutex to protect against changes to the inode flag;
specifically, the append-only, immutable, and extents inode flags. So
we need to take i_mutex before deciding whether to use the
extents-specific or indirect-specific punch_hole code.
Also, there was a missing call to ext4_inode_block_unlocked_dio() in
the indirect punch codepath. This was added in commit 02d262dffc
to block DIO readers racing against the punch operation in the
codepath for extent-mapped inodes, but it was missing for
indirect-block mapped inodes. One of the advantages of refactoring
the code is that it makes such oversights much less likely.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The older code was far more complicated than it needed to be because
of how we spliced in the ext4's new multiblock allocator into ext3's
indirect block code. By folding ext4_alloc_blocks() into
ext4_alloc_branch(), we make the code far more understable, shave off
over 130 lines of code and half a kilobyte of compiled object code.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
After collapsing the handling of data ordered and data writeback
codepath, ext4_generic_write_end() has only one caller,
ext4_write_end(). So we fold it into ext4_write_end().
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
The only difference between how we handle data=ordered and
data=writeback is a single call to ext4_jbd2_file_inode(). Eliminate
code duplication by factoring out redundant the code paths.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
When an extent was zeroed out, we forgot to do convert from cpu to le16.
It could make us hit a BUG_ON when we try to write dirty pages out. So
fix it.
[ Also fix a bug found by Dmitry Monakhov where we were missing
le32_to_cpu() calls in the new indirect punch hole code.
There are a number of other big endian warnings found by static code
analyzers, but we'll wait for the next merge window to fix them all
up. These fixes are designed to be Obviously Correct by code
inspection, and easy to demonstrate that it won't make any
difference (and hence, won't introduce any bugs) on little endian
architectures such as x86. --tytso ]
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: CAI Qian <caiqian@redhat.com>
Reported-by: Christian Kujau <lists@nerdbynature.de>
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
relatively obscure cornercases or races that were found using
regression tests.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=X3vc
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linue' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a number of regression and other bugs in ext4, most of which were
relatively obscure cornercases or races that were found using
regression tests."
* tag 'ext4_for_linue' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (21 commits)
ext4: fix data=journal fast mount/umount hang
ext4: fix ext4_evict_inode() racing against workqueue processing code
ext4: fix memory leakage in mext_check_coverage
ext4: use s_extent_max_zeroout_kb value as number of kb
ext4: use atomic64_t for the per-flexbg free_clusters count
jbd2: fix use after free in jbd2_journal_dirty_metadata()
ext4: reserve metadata block for every delayed write
ext4: update reserved space after the 'correction'
ext4: do not use yield()
ext4: remove unused variable in ext4_free_blocks()
ext4: fix WARN_ON from ext4_releasepage()
ext4: fix the wrong number of the allocated blocks in ext4_split_extent()
ext4: update extent status tree after an extent is zeroed out
ext4: fix wrong m_len value after unwritten extent conversion
ext4: add self-testing infrastructure to do a sanity check
ext4: avoid a potential overflow in ext4_es_can_be_merged()
ext4: invalidate extent status tree during extent migration
ext4: remove unnecessary wait for extent conversion in ext4_fallocate()
ext4: add warning to ext4_convert_unwritten_extents_endio
ext4: disable merging of uninitialized extents
...
In data=journal mode, if we unmount the file system before a
transaction has a chance to complete, when the journal inode is being
evicted, we can end up calling into jbd2_log_wait_commit() for the
last transaction, after the journalling machinery has been shut down.
Arguably we should adjust ext4_should_journal_data() to return FALSE
for the journal inode, but the only place it matters is
ext4_evict_inode(), and so to save a bit of CPU time, and to make the
patch much more obviously correct by inspection(tm), we'll fix it by
explicitly not trying to waiting for a journal commit when we are
evicting the journal inode, since it's guaranteed to never succeed in
this case.
This can be easily replicated via:
mount -t ext4 -o data=journal /dev/vdb /vdb ; umount /vdb
------------[ cut here ]------------
WARNING: at /usr/projects/linux/ext4/fs/jbd2/journal.c:542 __jbd2_log_start_commit+0xba/0xcd()
Hardware name: Bochs
JBD2: bad log_start_commit: 3005630206 3005630206 0 0
Modules linked in:
Pid: 2909, comm: umount Not tainted 3.8.0-rc3 #1020
Call Trace:
[<c015c0ef>] warn_slowpath_common+0x68/0x7d
[<c02b7e7d>] ? __jbd2_log_start_commit+0xba/0xcd
[<c015c177>] warn_slowpath_fmt+0x2b/0x2f
[<c02b7e7d>] __jbd2_log_start_commit+0xba/0xcd
[<c02b8075>] jbd2_log_start_commit+0x24/0x34
[<c0279ed5>] ext4_evict_inode+0x71/0x2e3
[<c021f0ec>] evict+0x94/0x135
[<c021f9aa>] iput+0x10a/0x110
[<c02b7836>] jbd2_journal_destroy+0x190/0x1ce
[<c0175284>] ? bit_waitqueue+0x50/0x50
[<c028d23f>] ext4_put_super+0x52/0x294
[<c020efe3>] generic_shutdown_super+0x48/0xb4
[<c020f071>] kill_block_super+0x22/0x60
[<c020f3e0>] deactivate_locked_super+0x22/0x49
[<c020f5d6>] deactivate_super+0x30/0x33
[<c0222795>] mntput_no_expire+0x107/0x10c
[<c02233a7>] sys_umount+0x2cf/0x2e0
[<c02233ca>] sys_oldumount+0x12/0x14
[<c08096b8>] syscall_call+0x7/0xb
---[ end trace 6a954cc790501c1f ]---
jbd2_log_wait_commit: error: j_commit_request=-1289337090, tid=0
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Commit 84c17543ab (ext4: move work from io_end to inode) triggered a
regression when running xfstest #270 when the file system is mounted
with dioread_nolock.
The problem is that after ext4_evict_inode() calls ext4_ioend_wait(),
this guarantees that last io_end structure has been freed, but it does
not guarantee that the workqueue structure, which was moved into the
inode by commit 84c17543ab, is actually finished. Once
ext4_flush_completed_IO() calls ext4_free_io_end() on CPU #1, this
will allow ext4_ioend_wait() to return on CPU #2, at which point the
evict_inode() codepath can race against the workqueue code on CPU #1
accessing EXT4_I(inode)->i_unwritten_work to find the next item of
work to do.
Fix this by calling cancel_work_sync() in ext4_ioend_wait(), which
will be renamed ext4_ioend_shutdown(), since it is only used by
ext4_evict_inode(). Also, move the call to ext4_ioend_shutdown()
until after truncate_inode_pages() and filemap_write_and_wait() are
called, to make sure all dirty pages have been written back and
flushed from the page cache first.
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<c01dda6a>] cwq_activate_delayed_work+0x3b/0x7e
*pdpt = 0000000030bc3001 *pde = 0000000000000000
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
Modules linked in:
Pid: 6, comm: kworker/u:0 Not tainted 3.8.0-rc3-00013-g84c1754-dirty #91 Bochs Bochs
EIP: 0060:[<c01dda6a>] EFLAGS: 00010046 CPU: 0
EIP is at cwq_activate_delayed_work+0x3b/0x7e
EAX: 00000000 EBX: 00000000 ECX: f505fe54 EDX: 00000000
ESI: ed5b697c EDI: 00000006 EBP: f64b7e8c ESP: f64b7e84
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
CR0: 8005003b CR2: 00000000 CR3: 30bc2000 CR4: 000006f0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
Process kworker/u:0 (pid: 6, ti=f64b6000 task=f64b4160 task.ti=f64b6000)
Stack:
f505fe00 00000006 f64b7e9c c01de3d7 f6435540 00000003 f64b7efc c01def1d
f6435540 00000002 00000000 0000008a c16d0808 c040a10b c16d07d8 c16d08b0
f505fe00 c16d0780 00000000 00000000 ee153df4 c1ce4a30 c17d0e30 00000000
Call Trace:
[<c01de3d7>] cwq_dec_nr_in_flight+0x71/0xfb
[<c01def1d>] process_one_work+0x5d8/0x637
[<c040a10b>] ? ext4_end_bio+0x300/0x300
[<c01e3105>] worker_thread+0x249/0x3ef
[<c01ea317>] kthread+0xd8/0xeb
[<c01e2ebc>] ? manage_workers+0x4bb/0x4bb
[<c023a370>] ? trace_hardirqs_on+0x27/0x37
[<c0f1b4b7>] ret_from_kernel_thread+0x1b/0x28
[<c01ea23f>] ? __init_kthread_worker+0x71/0x71
Code: 01 83 15 ac ff 6c c1 00 31 db 89 c6 8b 00 a8 04 74 12 89 c3 30 db 83 05 b0 ff 6c c1 01 83 15 b4 ff 6c c1 00 89 f0 e8 42 ff ff ff <8b> 13 89 f0 83 05 b8 ff 6c c1
6c c1 00 31 c9 83
EIP: [<c01dda6a>] cwq_activate_delayed_work+0x3b/0x7e SS:ESP 0068:f64b7e84
CR2: 0000000000000000
---[ end trace a1923229da53d8a4 ]---
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
Regression was introduced by following commit 8c854473
TESTCASE (git://oss.sgi.com/xfs/cmds/xfstests.git):
#while true;do ./check 301 || break ;done
Also fix potential memory leakage in get_ext_path() once
ext4_ext_find_extent() have failed.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
I had assumed that the only use of module aliases for filesystems
prior to "fs: Limit sys_mount to only request filesystem modules."
was in request_module. It turns out I was wrong. At least mkinitcpio
in Arch linux uses these aliases.
So readd the preexising aliases, to keep from breaking userspace.
Userspace eventually will have to follow and use the same aliases the
kernel does. So at some point we may be delete these aliases without
problems. However that day is not today.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Currently when converting extent to initialized, we have to decide
whether to zeroout part/all of the uninitialized extent in order to
avoid extent tree growing rapidly.
The decision is made by comparing the size of the extent with the
configurable value s_extent_max_zeroout_kb which is in kibibytes units.
However when converting it to number of blocks we currently use it as it
was in bytes. This is obviously bug and it will result in ext4 _never_
zeroout extents, but rather always split and convert parts to
initialized while leaving the rest uninitialized in default setting.
Fix this by using s_extent_max_zeroout_kb as kibibytes.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
A user who was using a 8TB+ file system and with a very large flexbg
size (> 65536) could cause the atomic_t used in the struct flex_groups
to overflow. This was detected by PaX security patchset:
http://forums.grsecurity.net/viewtopic.php?f=3&t=3289&p=12551#p12551
This bug was introduced in commit 9f24e4208f, so it's been around
since 2.6.30. :-(
Fix this by using an atomic64_t for struct orlav_stats's
free_clusters.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Cc: stable@vger.kernel.org
Currently we only reserve space (data+metadata) in delayed allocation if
we're allocating from new cluster (which is always in non-bigalloc file
system) which is ok for data blocks, because we reserve the whole cluster.
However we have to reserve metadata for every delayed block we're going
to write because every block could potentially require metedata block
when we need to grow the extent tree.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Currently in ext4_ext_map_blocks() in delayed allocation writeback
we would update the reservation and after that check whether we claimed
cluster outside of the range of the allocation and if so, we'll give the
block back to the reservation pool.
However this also means that if the number of reserved data block
dropped to zero before the correction, we would release all the metadata
reservation as well, however we might still need it because the we're
not done with the delayed allocation and there might be more blocks to
come. This will result in error messages such as:
EXT4-fs warning (device sdb): ext4_da_update_reserve_space:361: ino 12,
allocated 1 with only 0 reserved metadata blocks (releasing 1 blocks
with reserved 1 data blocks)
This will only happen on bigalloc file system and it can be easily
reproduced using fiemap-tester from xfstests like this:
./src/fiemap-tester -m DHDHDHDHD -S -p0 /mnt/test/file
Or using xfstests such as 225.
Fix this by doing the correction first and updating the reservation
after that so that we do not accidentally decrease
i_reserved_data_blocks to zero.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Using yield() is strongly discouraged (see sched/core.c) especially
since we can just use cond_resched().
Replace all use of yield() with cond_resched().
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4_releasepage() warns when it is passed a page with PageChecked set.
However this can correctly happen when invalidate_inode_pages2_range()
invalidates pages - and we should fail the release in that case. Since
the page was dirty anyway, it won't be discarded and no harm has
happened but it's good to be safe. Also remove bogus page_has_buffers()
check - we are guaranteed page has buffers in this function.
Reported-by: Zheng Liu <gnehzuil.liu@gmail.com>
Tested-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
This commit fixes a wrong return value of the number of the allocated
blocks in ext4_split_extent. When the length of blocks we want to
allocate is greater than the length of the current extent, we return a
wrong number. Let's see what happens in the following case when we
call ext4_split_extent().
map: [48, 72]
ex: [32, 64, u]
'ex' will be split into two parts:
ex1: [32, 47, u]
ex2: [48, 64, w]
'map->m_len' is returned from this function, and the value is 24. But
the real length is 16. So it should be fixed.
Meanwhile in this commit we use right length of the allocated blocks
when get_reserved_cluster_alloc in ext4_ext_handle_uninitialized_extents
is called.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: stable@vger.kernel.org
When we try to split an extent, this extent could be zeroed out and mark
as initialized. But we don't know this in ext4_map_blocks because it
only returns a length of allocated extent. Meanwhile we will mark this
extent as uninitialized because we only check m_flags.
This commit update extent status tree when we try to split an unwritten
extent. We don't need to worry about the status of this extent because
we always mark it as initialized.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
The ext4_ext_handle_uninitialized_extents() function was assuming the
return value of ext4_ext_map_blocks() is equal to map->m_len. This
incorrect assumption was harmless until we started use status tree as
a extent cache because we need to update status tree according to
'm_len' value.
Meanwhile this commit marks EXT4_MAP_MAPPED flag after unwritten extent
conversion. It shouldn't cause a bug because we update status tree
according to checking EXT4_MAP_UNWRITTEN flag. But it should be fixed.
After applied this commit, the following error message from self-testing
infrastructure disappears.
...
kernel: ES len assertation failed for inode: 230 retval 1 !=
map->m_len 3 in ext4_map_blocks (allocation)
...
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
This commit adds a self-testing infrastructure like extent tree does to
do a sanity check for extent status tree. After status tree is as a
extent cache, we'd better to make sure that it caches right result.
After applied this commit, we will get a lot of messages when we run
xfstests as below.
...
kernel: ES len assertation failed for inode: 230 retval 1 != map->m_len
3 in ext4_map_blocks (allocation)
...
kernel: ES cache assertation failed for inode: 230 es_cached ex
[974/2/4781/20] != found ex [974/1/4781/1000]
...
kernel: ES insert assertation failed for inode: 635 ex_status
[0/45/21388/w] != es_status [44/1/21432/u]
...
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Check the length of an extent to avoid a potential overflow in
ext4_es_can_be_merged().
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
mext_replace_branches() will change inode's extents layout so
we have to drop corresponding cache.
TESTCASE: 301'th xfstest was not yet accepted to official xfstest's branch
and can be found here: 7b7efeee30
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Now that we don't merge uninitialized extents anymore,
ext4_fallocate() is free to operate on the inode while there are still
some extent conversions pending - it won't disturb them in any way.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Splitting extents inside endio is a bad thing, but unfortunately it is
still possible. In fact we are pretty close to the moment when all
related issues will be fixed. Let's warn developer if it still the
case.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Derived from Jan's patch:http://permalink.gmane.org/gmane.comp.file-systems.ext4/36470
Merging of uninitialized extents creates all sorts of interesting race
possibilities when writeback / DIO races with fallocate. Thus
ext4_convert_unwritten_extents_endio() has to deal with a case where
extent to be converted needs to be split out first. That isn't nice
for two reasons:
1) It may need allocation of extent tree block so ENOSPC is possible.
2) It complicates end_io handling code
So we disable merging of uninitialized extents which allows us to simplify
the code. Extents will get merged after they are converted to initialized
ones.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
When ext4_split_extent_at() ends up doing zeroout & conversion to
initialized instead of split & conversion, ext4_split_extent() gets
confused and can wrongly mark the extent back as uninitialized
resulting in end IO code getting confused from large unwritten extents
and may result in data loss.
The example of problematic behavior is:
lblk len lblk len
ext4_split_extent() (ex=[1000,30,uninit], map=[1010,10])
ext4_split_extent_at() (split [1000,30,uninit] at 1020)
ext4_ext_insert_extent() -> ENOSPC
ext4_ext_zeroout()
-> extent [1000,30] is now initialized
ext4_split_extent_at() (split [1000,30,init] at 1010,
MARK_UNINIT1 | MARK_UNINIT2)
-> extent is split and parts marked as uninitialized
Fix the problem by rechecking extent type after the first
ext4_split_extent_at() returns. None of split_flags can not be applied
to initialized extent so this patch also add BUG_ON to prevent similar
issues in future.
TESTCASE: b8a55eb5ce
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Modify the request_module to prefix the file system type with "fs-"
and add aliases to all of the filesystems that can be built as modules
to match.
A common practice is to build all of the kernel code and leave code
that is not commonly needed as modules, with the result that many
users are exposed to any bug anywhere in the kernel.
Looking for filesystems with a fs- prefix limits the pool of possible
modules that can be loaded by mount to just filesystems trivially
making things safer with no real cost.
Using aliases means user space can control the policy of which
filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf
with blacklist and alias directives. Allowing simple, safe,
well understood work-arounds to known problematic software.
This also addresses a rare but unfortunate problem where the filesystem
name is not the same as it's module name and module auto-loading
would not work. While writing this patch I saw a handful of such
cases. The most significant being autofs that lives in the module
autofs4.
This is relevant to user namespaces because we can reach the request
module in get_fs_type() without having any special permissions, and
people get uncomfortable when a user specified string (in this case
the filesystem type) goes all of the way to request_module.
After having looked at this issue I don't think there is any
particular reason to perform any filtering or permission checks beyond
making it clear in the module request that we want a filesystem
module. The common pattern in the kernel is to call request_module()
without regards to the users permissions. In general all a filesystem
module does once loaded is call register_filesystem() and go to sleep.
Which means there is not much attack surface exposed by loading a
filesytem module unless the filesystem is mounted. In a user
namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT,
which most filesystems do not set today.
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reported-by: Kees Cook <keescook@google.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Pull more VFS bits from Al Viro:
"Unfortunately, it looks like xattr series will have to wait until the
next cycle ;-/
This pile contains 9p cleanups and fixes (races in v9fs_fid_add()
etc), fixup for nommu breakage in shmem.c, several cleanups and a bit
more file_inode() work"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
constify path_get/path_put and fs_struct.c stuff
fix nommu breakage in shmem.c
cache the value of file_inode() in struct file
9p: if v9fs_fid_lookup() gets to asking server, it'd better have hashed dentry
9p: make sure ->lookup() adds fid to the right dentry
9p: untangle ->lookup() a bit
9p: double iput() in ->lookup() if d_materialise_unique() fails
9p: v9fs_fid_add() can't fail now
v9fs: get rid of v9fs_dentry
9p: turn fid->dlist into hlist
9p: don't bother with private lock in ->d_fsdata; dentry->d_lock will do just fine
more file_inode() open-coded instances
selinux: opened file can't have NULL or negative ->f_path.dentry
(In the meantime, the hlist traversal macros have changed, so this
required a semantic conflict fixup for the newly hlistified fid->dlist)
extent cache's slab shrinker which can cause significant, user-visible
pauses when the system is under memory pressure.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=+vcC
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bug fixes from Ted Ts'o:
"Various bug fixes for ext4. The most important is a fix for the new
extent cache's slab shrinker which can cause significant, user-visible
pauses when the system is under memory pressure."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: enable quotas before orphan cleanup
ext4: don't allow quota mount options when quota feature enabled
ext4: fix a warning from sparse check for ext4_dir_llseek
ext4: convert number of blocks to clusters properly
ext4: fix possible memory leak in ext4_remount()
jbd2: fix ERR_PTR dereference in jbd2__journal_start
ext4: use percpu counter for extent cache count
ext4: optimize ext4_es_shrink()
When using quota feature we need to enable quotas before orphan cleanup
so that changes happening during it are properly reflected in quota
accounting.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
So far we silently ignored when quota mount options were set while quota
feature was enabled. But this can create confusion in userspace when
mount options are set but silently ignored and also creates opportunities
for bugs when we don't properly test all quota types. Actually
ext4_mark_dquot_dirty() forgets to test for quota feature so it was
dependent on journaled quota options being set. OTOH ext4_orphan_cleanup()
tries to enable journaled quota when quota options are specified which is
wrong when quota feature is enabled.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4_dir_llseek is only used as a callback function, and no one calls
it directly. So make it as a static function in order to remove a
warning message from sparse check.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We're using macro EXT4_B2C() to convert number of blocks to number of
clusters for bigalloc file systems. However, we should be using
EXT4_NUM_B2C().
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
'orig_data' is malloced in ext4_remount() and should be freed
before leaving from the error handling cases, otherwise it will
cause memory leak.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Cc: stable@vger.kernel.org
Use a percpu counter rather than atomic types for shrinker accounting.
There's no need for ultimate accuracy in the shrinker, so this
should come a little more cheaply. The percpu struct is somewhat
large, but there was a big gap before the cache-aligned
s_es_lru_lock anyway, and it fits nicely in there.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When the system is under memory pressure, ext4_es_srhink() will get
called very often. So optimize returning the number of items in the
file system's extent status cache by keeping a per-filesystem count,
instead of calculating it each time by scanning all of the inodes in
the extent status cache.
Also rename the slab used for the extent status cache to be
"ext4_extent_status" so it's obviousl the slab in question is created
by ext4.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Zheng Liu <gnehzuil.liu@gmail.com>
file systems larger than 512GB.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=cuPi
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 regression fix from Theodore Ts'o:
"This fixes a real brown paper bag bug which causes ext4 to choke on
file systems larger than 512GB."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix extent status tree regression for file systems > 512GB
This fixes a regression introduced by commit f7fec032aa. The
problem was that the extents status flags caused us to mask out block
numbers smaller than 2**28 blocks. Since we didn't test with file
systems smaller than 512GB, we didn't notice this during the
development cycle.
A typical failure looks like this:
EXT4-fs error (device sdb1): htree_dirblock_to_tree:919: inode #172235804: block
152052301: comm ls: bad entry in directory: rec_len is smaller than minimal -
offset=0(0), inode=0, rec_len=0, name_len=0
... where 'debugfs -R "stat <172235804>" /dev/sdb1' reports that the
inode has block number 688923213. When viewed in hex, block number
152052301 (from the syslog) is 0x910224D, while block number 688923213
is 0x2910224D. Note the missing "0x20000000" in the block number.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Verified-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Reported-by: Dave Jones <davej@redhat.com>
Verified-by: Dave Jones <davej@redhat.com>
Cc: Zheng Liu <gnehzuil.liu@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Pull vfs pile (part one) from Al Viro:
"Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
locking violations, etc.
The most visible changes here are death of FS_REVAL_DOT (replaced with
"has ->d_weak_revalidate()") and a new helper getting from struct file
to inode. Some bits of preparation to xattr method interface changes.
Misc patches by various people sent this cycle *and* ocfs2 fixes from
several cycles ago that should've been upstream right then.
PS: the next vfs pile will be xattr stuff."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
saner proc_get_inode() calling conventions
proc: avoid extra pde_put() in proc_fill_super()
fs: change return values from -EACCES to -EPERM
fs/exec.c: make bprm_mm_init() static
ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
ocfs2: fix possible use-after-free with AIO
ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
target: writev() on single-element vector is pointless
export kernel_write(), convert open-coded instances
fs: encode_fh: return FILEID_INVALID if invalid fid_type
kill f_vfsmnt
vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
nfsd: handle vfs_getattr errors in acl protocol
switch vfs_getattr() to struct path
default SET_PERSONALITY() in linux/elf.h
ceph: prepopulate inodes only when request is aborted
d_hash_and_lookup(): export, switch open-coded instances
9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
9p: split dropping the acls from v9fs_set_create_acl()
...
the "punch hole" functionality for inodes that are not using extent
maps.
In the bug fix category, we fixed some races in the AIO and fstrim
code, and some potential NULL pointer dereferences and memory leaks in
error handling code paths.
In the optimization category, we fixed a performance regression in the
jbd2 layer introduced by commit d9b0193 (introduced in v3.0) which
shows up in the AIM7 benchmark. We also further optimized jbd2 by
minimize the amount of time that transaction handles are held active.
This patch series also features some additional enhancement of the
extent status tree, which is now used to cache extent information in a
more efficient/compact form than what we use on-disk.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=KSV1
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Theodore Ts'o:
"The one new feature added in this patch series is the ability to use
the "punch hole" functionality for inodes that are not using extent
maps.
In the bug fix category, we fixed some races in the AIO and fstrim
code, and some potential NULL pointer dereferences and memory leaks in
error handling code paths.
In the optimization category, we fixed a performance regression in the
jbd2 layer introduced by commit d9b01934d5 ("jbd: fix fsync() tid
wraparound bug", introduced in v3.0) which shows up in the AIM7
benchmark. We also further optimized jbd2 by minimize the amount of
time that transaction handles are held active.
This patch series also features some additional enhancement of the
extent status tree, which is now used to cache extent information in a
more efficient/compact form than what we use on-disk."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (65 commits)
ext4: fix free clusters calculation in bigalloc filesystem
ext4: no need to remove extent if len is 0 in ext4_es_remove_extent()
ext4: fix xattr block allocation/release with bigalloc
ext4: reclaim extents from extent status tree
ext4: adjust some functions for reclaiming extents from extent status tree
ext4: remove single extent cache
ext4: lookup block mapping in extent status tree
ext4: track all extent status in extent status tree
ext4: let ext4_ext_map_blocks return EXT4_MAP_UNWRITTEN flag
ext4: rename and improbe ext4_es_find_extent()
ext4: add physical block and status member into extent status tree
ext4: refine extent status tree
ext4: use ERR_PTR() abstraction for ext4_append()
ext4: refactor code to read directory blocks into ext4_read_dirblock()
ext4: add debugging context for warning in ext4_da_update_reserve_space()
ext4: use KERN_WARNING for warning messages
jbd2: use module parameters instead of debugfs for jbd_debug
ext4: use module parameters instead of debugfs for mballoc_debug
ext4: start handle at the last possible moment when creating inodes
ext4: fix the number of credits needed for acl ops with inline data
...
Pull ext2, ext3, udf updates from Jan Kara:
"Several UDF fixes, a support for UDF extent cache, and couple of ext2
and ext3 cleanups and minor fixes"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
Ext2: remove the static function release_blocks to optimize the kernel
Ext2: mark inode dirty after the function dquot_free_block_nodirty is called
Ext2: remove the overhead check about sb in the function ext2_new_blocks
udf: Remove unused s_extLength from udf_bitmap
udf: Make s_block_bitmap standard array
udf: Fix bitmap overflow on large filesystems with small block size
udf: add extent cache support in case of file reading
udf: Write LVID to disk after opening / closing
Ext3: return ENOMEM rather than EIO if sb_getblk fails
Ext2: return ENOMEM rather than EIO if sb_getblk fails
Ext3: use unlikely to improve the efficiency of the kernel
Ext2: use unlikely to improve the efficiency of the kernel
Ext3: add necessary check in case IO error happens
Ext2: free memory allocated and forget buffer head when io error happens
ext3: Fix memory leak when quota options are specified multiple times
ext3, ext4, ocfs2: remove unused macro NAMEI_RA_INDEX
ext4_has_free_clusters() should tell us whether there is enough free
clusters to allocate, however number of free clusters in the file system
is converted to blocks using EXT4_C2B() which is not only wrong use of
the macro (we should have used EXT4_NUM_B2C) but it's also completely
wrong concept since everything else is in cluster units.
Moreover when calculating number of root clusters we should be using
macro EXT4_NUM_B2C() instead of EXT4_B2C() otherwise the result might be
off by one. However r_blocks_count should always be a multiple of the
cluster ratio so doing a plain bit shift should be enough here. We
avoid using EXT4_B2C() because it's confusing.
As a result of the first problem number of free clusters is much bigger
than it should have been and ext4_has_free_clusters() would return 1 even
if there is really not enough free clusters available.
Fix this by removing the EXT4_C2B() conversion of free clusters and
using bit shift when calculating number of root clusters. This bug
affects number of xfstests tests covering file system ENOSPC situation
handling. With this patch most of the ENOSPC problems with bigalloc file
system disappear, especially the errors caused by delayed allocation not
having enough space when the actual allocation is finally requested.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
len is 0 means no extent needs to be removed, so return immediately.
Otherwise it could trigger the following BUG_ON() in
ext4_es_remove_extent()
end = lblk + len - 1;
BUG_ON(end < lblk);
This could be reproduced by a simple truncate(1) command by an
unprivileged user
truncate -s $(($((2**32 - 1)) * 4096)) /mnt/ext4/testfile
The same is true for __es_insert_extent().
Patched kernel passed xfstests regression test.
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Create a helper function to check if a backing device requires stable
page writes and, if so, performs the necessary wait. Then, make it so
that all points in the memory manager that handle making pages writable
use the helper function. This should provide stable page write support
to most filesystems, while eliminating unnecessary waiting for devices
that don't require the feature.
Before this patchset, all filesystems would block, regardless of whether
or not it was necessary. ext3 would wait, but still generate occasional
checksum errors. The network filesystems were left to do their own
thing, so they'd wait too.
After this patchset, all the disk filesystems except ext3 and btrfs will
wait only if the hardware requires it. ext3 (if necessary) snapshots
pages instead of blocking, and btrfs provides its own bdi so the mm will
never wait. Network filesystems haven't been touched, so either they
provide their own stable page guarantees or they don't block at all.
The blocking behavior is back to what it was before 3.0 if you don't
have a disk requiring stable page writes.
Here's the result of using dbench to test latency on ext2:
3.8.0-rc3:
Operation Count AvgLat MaxLat
----------------------------------------
WriteX 109347 0.028 59.817
ReadX 347180 0.004 3.391
Flush 15514 29.828 287.283
Throughput 57.429 MB/sec 4 clients 4 procs max_latency=287.290 ms
3.8.0-rc3 + patches:
WriteX 105556 0.029 4.273
ReadX 335004 0.005 4.112
Flush 14982 30.540 298.634
Throughput 55.4496 MB/sec 4 clients 4 procs max_latency=298.650 ms
As you can see, the maximum write latency drops considerably with this
patch enabled. The other filesystems (ext3/ext4/xfs/btrfs) behave
similarly, but see the cover letter for those results.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently when new xattr block is created or released we we would call
dquot_free_block() or dquot_alloc_block() respectively, among the else
decrementing or incrementing the number of blocks assigned to the
inode by one block.
This however does not work for bigalloc file system because we always
allocate/free the whole cluster so we have to count with that in
dquot_free_block() and dquot_alloc_block() as well.
Use the clusters-to-blocks conversion EXT4_C2B() when passing number of
blocks to the dquot_alloc/free functions to fix the problem.
The problem has been revealed by xfstests #117 (and possibly others).
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Cc: stable@vger.kernel.org
Although extent status is loaded on-demand, we also need to reclaim
extent from the tree when we are under a heavy memory pressure because
in some cases fragmented extent tree causes status tree costs too much
memory.
Here we maintain a lru list in super_block. When the extent status of
an inode is accessed and changed, this inode will be move to the tail
of the list. The inode will be dropped from this list when it is
cleared. In the inode, a counter is added to count the number of
cached objects in extent status tree. Here only written/unwritten/hole
extent is counted because delayed extent doesn't be reclaimed due to
fiemap, bigalloc and seek_data/hole need it. The counter will be
increased as a new extent is allocated, and it will be decreased as a
extent is freed.
In this commit we use normal shrinker framework to reclaim memory from
the status tree. ext4_es_reclaim_extents_count() traverses the lru list
to count the number of reclaimable extents. ext4_es_shrink() tries to
reclaim written/unwritten/hole extents from extent status tree. The
inode that has been shrunk is moved to the tail of lru list.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan kara <jack@suse.cz>
This commit changes some interfaces in extent status tree because we
need to use inode to count the cached objects in a extent status tree.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan kara <jack@suse.cz>
Single extent cache could be removed because we have extent status tree
as a extent cache, and it would be better.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan kara <jack@suse.cz>
After tracking all extent status, we already have a extent cache in
memory. Every time we want to lookup a block mapping, we can first
try to lookup it in extent status tree to avoid a potential disk I/O.
A new function called ext4_es_lookup_extent is defined to finish this
work. When we try to lookup a block mapping, we always call
ext4_map_blocks and/or ext4_da_map_blocks. So in these functions we
first try to lookup a block mapping in extent status tree.
A new flag EXT4_GET_BLOCKS_NO_PUT_HOLE is used in ext4_da_map_blocks
in order not to put a hole into extent status tree because this hole
will be converted to delayed extent in the tree immediately.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan kara <jack@suse.cz>
By recording the phycisal block and status, extent status tree is able
to track the status of every extents. When we call _map_blocks
functions to lookup an extent or create a new written/unwritten/delayed
extent, this extent will be inserted into extent status tree.
We don't load all extents from disk in alloc_inode() because it costs
too much memory, and if a file is opened and closed frequently it will
takes too much time to load all extent information. So currently when
we create/lookup an extent, this extent will be inserted into extent
status tree. Hence, the extent status tree may not comprehensively
contain all of the extents found in the file.
Here a condition we need to take care is that an extent might contains
unwritten and delayed status simultaneously because an extent is delayed
allocated and could be allocated by fallocate. At this time we need to
keep delayed status because later we need to update delayed reservation
space using it.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan kara <jack@suse.cz>
This commit lets ext4_ext_map_blocks return EXT4_MAP_UNWRITTEN flag
because in later commit ext4_map_blocks needs to use this flag to
determine the extent status.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
This commit renames ext4_es_find_extent with ext4_es_find_delayed_extent
and improve this function. First, we split input and output parameter.
Second, this function never return the first block of the next delayed
extent after 'es'.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan kara <jack@suse.cz>
This commit adds two members in extent_status structure to let it record
physical block and extent status. Here es_pblk is used to record both
of them because physical block only has 48 bits. So extent status could
be stashed into it so that we can save some memory. Now written,
unwritten, delayed and hole are defined as status.
Due to new member is added into extent status tree, all interfaces need
to be adjusted.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
This commit refines the extent status tree code.
1) A prefix 'es_' is added to to the extent status tree structure
members.
2) Refactored es_remove_extent() so that __es_remove_extent() can be
used by es_insert_extent() to remove the old extent entry(-ies) before
inserting a new one.
3) Rename extent_status_end() to ext4_es_end()
4) ext4_es_can_be_merged() is define to check whether two extents can
be merged or not.
5) Update and clarified comments.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Use ERR_PTR()/IS_ERR() abstraction instead of passing in a separate
pointer to an integer for the error code, as a code cleanup.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The code to read in directory blocks and verify their metadata
checksums was replicated in ten different places across
fs/ext4/namei.c, and the code was buggy in subtle ways in a number of
those replicated sites. In some cases, ext4_error() was called with a
training newline. In others, in particularly in empty_dir(), it was
possible to call ext4_dirent_csum_verify() on an index block, which
would trigger false warnings requesting the system adminsitrator to
run e2fsck.
By refactoring the code, we make the code more readable, as well as
shrinking the compiled object file by over 700 bytes and 50 lines of
code.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Print some additional debugging context to hopefully help to debug a
warning which is getting triggered by xfstests #74.
Also remove extraneous newlines from when printk's were converted to
ext4_warning() and ext4_msg().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Some messages printed related to a WARN_ON(1) were printed using
KERN_NOTICE. Use KERN_WARNING or ext4_warning() instead so that
context related to the WARN_ON() is printed at the same printk warning
level (and log files, etc.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There are multiple reasons to move away from debugfs. First of all,
we are only using it for a single parameter, and it is much more
complicated to set up (some 30 lines of code compared to 3), and one
more thing that might fail while loading the ext4 module.
Secondly, as a module paramter it can be specified as a boot option if
ext4 is built into the kernel, or as a parameter when the module is
loaded, and it can also be manipulated dynamically under
/sys/module/ext4/parameters/mballoc_debug. So it is more flexible.
Ultimately we want to move away from using mb_debug() towards
tracepoints, but for now this is still a useful simplification of the
code base.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In ext4_{create,mknod,mkdir,symlink}(), don't start the journal handle
until the inode has been succesfully allocated. In order to do this,
we need to start the handle in the ext4_new_inode(). So create a new
variant of this function, ext4_new_inode_start_handle(), so the handle
can be created at the last possible minute, before we need to modify
the inode allocation bitmap block.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Operations which modify extended attributes may need extra journal
credits if inline data is used, since there is a chance that some
extended attributes may need to get pushed to an external attribute
block.
Changes to reflect this was made in xattr.c, but they were missed in
fs/ext4/acl.c. To fix this, abstract the calculation of the number of
credits needed for xattr operations to an inline function defined in
ext4_jbd2.h, and use it in acl.c and xattr.c.
Also move the function declarations used in inline.c from xattr.h
(where they are non-obviously hidden, and caused problems since
ext4_jbd2.h needs to use the function ext4_has_inline_data), and move
them to ext4.h.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Tao Ma <boyu.mt@taobao.com>
Reviewed-by: Jan Kara <jack@suse.cz>
The ext4_unlink() and ext4_rmdir() don't actually release the blocks
associated with the file/directory. This gets done in a separate jbd2
handle called via ext4_evict_inode(). Thus, we don't need to reserve
lots of journal credits for the truncate.
Note that using too many journal credits is non-optimal because it can
leading to the journal transmit getting closed too early, before it is
strictly necessary.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
The migration ioctl creates a temporary inode. Since this inode is
never linked to a directory, we don't need to reserve journal credits
required for modifying the directory.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Don't start the jbd2 transaction handle until after the directory
entry has been found, to minimize the amount of time that a handle is
held active.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Don't start the jbd2 transaction handle until after the directory
entry has been found, to minimize the amount of time that a handle is
held active.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
The grab_cache_page_write_begin() function can potentially sleep for a
long time, since it may need to do memory allocation which can block
if the system is under significant memory pressure, and because it may
be blocked on page writeback. If it does take a long time to grab the
page, it's better that we not hold an active jbd2 handle.
So grab a handle on the page first, and _then_ start the transaction
handle.
This commit fixes the following long transaction handle hold time:
postmark-2917 [000] .... 196.435786: jbd2_handle_stats: dev 254,32
tid 570 type 2 line_no 2541 interval 311 sync 0 requested_blocks 1
dirtied_blocks 0
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
So we can better understand what bits of ext4 are responsible for
long-running jbd2 handles, use jbd2__journal_start() so we can pass
context information for logging purposes.
The recommended way for finding the longer-running handles is:
T=/sys/kernel/debug/tracing
EVENT=$T/events/jbd2/jbd2_handle_stats
echo "interval > 5" > $EVENT/filter
echo 1 > $EVENT/enable
./run-my-fs-benchmark
cat $T/trace > /tmp/problem-handles
This will list handles that were active for longer than 20ms. Having
longer-running handles is bad, because a commit started at the wrong
time could stall for those 20+ milliseconds, which could delay an
fsync() or an O_SYNC operation. Here is an example line from the
trace file describing a handle which lived on for 311 jiffies, or over
1.2 seconds:
postmark-2917 [000] .... 196.435786: jbd2_handle_stats: dev 254,32
tid 570 type 2 line_no 2541 interval 311 sync 0 requested_blocks 1
dirtied_blocks 0
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Move the jbd2 wrapper functions which start and stop handles out of
super.c, where they don't really logically belong, and into
ext4_jbd2.c.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext4 block allocator only maintains buddy bitmaps for chunks which
are less than or equal to one quarter of a block group. That is, for
a file aystem with a 1k blocksize, and where the number of blocks in a
block group is 8192 blocks, the largest chunk size tracked by buddy
bitmaps is 2048 blocks.
For a file system with a 4k blocksize, and where the number of blocks
in a block group is 32768 blocks, the largest chunk size tracked by
buddy bitmaps is 8192 blocks.
To work around this code, mballoc.c before this commit would truncate
allocation requests to the number of blocks in a block group minus 10.
Why 10? Aside from being a completely arbitrary number, it avoids
block allocation to be a power of two larger than 25% of the block
group. If you try to explicitly fallocate 50% of the block group
size, this will demonstrate the problem; the block allocation code
will scan the all of the blocks in the file system with cr==0 (since
the request is for a natural power of two), but then completely fail
for all blocks groups, since the buddy bitmaps don't track chunk sizes
of 50% of the block group.
To fix this, in these we use ext4_mb_complex_scan_group() instead of
ext4_mb_simple_scan_group().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger@dilger.ca>
Check for incompatible mount options when using the ext4 file system
driver to mount ext2 or ext3 file systems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If argument of inode_readahead_blk is too big, we just bail out
without printing any error. Fix this since it could confuse users.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The loop looking for correct mount option entry is more logical if it is
written rewritten as an empty loop looking for correct option entry and then
code handling the option. It also saves one level of indentation for a lot of
code so we can join a couple of split lines.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Several mount option (resuid, resgid, journal_dev, journal_ioprio) are
currently handled before we enter standard option handling loop. I don't
see a reason for this so move them to normal handling loop to make things
more regular.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
It is unnecessary to check i<4 after the loop; just do it before the
break.
Signed-off-by: Cong Ding <dinggnu@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In ext4_mb_add_n_trim(), lg_prealloc_lock should be taken when
changing the lg_prealloc_list.
Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Commit 2147b1a6a4 resulted in a new smatch warning:
> fs/ext4/move_extent.c:693 mext_replace_branches()
> warn: variable dereferenced before check 'dext' (see line 683)
Fix this by adding a check to make sure dext is non-NULL before we
derefrence it.
Signed-off-by: Akria Fujita <a-fujita@rs.jp.nec.com>
[ modified by tytso to make sure an ext4_error is called ]
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use WARN rather than printk followed by WARN_ON(1), for conciseness.
A simplified version of the semantic patch that makes this transformation
is as follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression list es;
@@
-printk(
+WARN(1,
es);
-WARN_ON(1);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Running AIO is pinning inode in memory using file reference. Once AIO
is completed using aio_complete(), file reference is put and inode can
be freed from memory. So we have to be sure that calling aio_complete()
is the last thing we do with the inode.
CC: stable@vger.kernel.org
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
brelse() and ext4_journal_force_commit() are both inlined and able
to handle NULL.
Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
After commit 978fef9 (create __ext4_insert_dentry for dir entry
insertion), 'reclen' is not used anymore.
Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Commit b0336e8d (ext4: calculate and verify checksums of directory
leaf blocks) and commit dbe89444 (ext4: Calculate and verify checksums
for htree nodes) forget to release buffer when checksum failed, at
some places.
Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
In two places we call WARN_ON() before we print out the debug message,
however we agreed that the WARN_ON() is unnecessary at those places so
remove them.
Also use ext4_warning() instead of ext4_msg() and printk().
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Remove unused variable flags from dump_completed_IO(). The code is
only exercised when EXT4FS_DEBUG is defined.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
So far ext4_writepage() skipped writing pages that had any delayed or
unwritten buffers attached. When blocksize < pagesize this breaks
data=ordered mode guarantees as we can have a page with one freshly
allocated buffer whose allocation is part of the committing
transaction and another buffer in the page which is delayed or
unwritten. So fix this problem by calling ext4_bio_writepage()
anyway. It will submit mapped buffers and leave others alone.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
So far ext4_bio_writepage() unconditionally cleared dirty bit on all
buffers underlying the page. That implicitely assumes we can write all
buffers. So far that is true because callers call into
ext4_bio_writepage() make sure all buffers in the page are mapped but:
a) it's a data corruption bug waiting to happen
b) in data=ordered mode when blocksize < pagesize we do need to write
pages that may have only some of dirty buffers mapped.
So change ext4_bio_writepage() to skip buffers that cannot be written without
clearing their dirty bit.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The argument b_size of mpage_add_bh_to_extent() was bogus since it was
always == blocksize (which we can easily derive from inode->i_blkbits).
Also second branch of condition:
if (nrblocks >= EXT4_MAX_TRANS_DATA) {
} else if ((nrblocks + (b_size >> mpd->inode->i_blkbits)) >
EXT4_MAX_TRANS_DATA) {
}
was never taken because (b_size >> mpd->inode->i_blkbits) == 1.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4_writepage(), write_cache_pages_da(), and mpage_da_submit_io()
doesn't have to deal with the case when page doesn't have buffers. We
attach buffers to a page in ->write_begin() and ->page_mkwrite() which
covers all places where a page can become dirty.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The function splices i_completed_io_list to its private list
first. From that moment on we don't need any lock for working with
io_end structures because all io_end structure on the list are only
our own. So we can remove the other two lists in the function and free
io_end immediately after we are done with it.
CC: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
It does not make much sense to have struct work in ext4_io_end_t
because we always use it for only one ext4_io_end_t per inode (the
first one in the i_completed_io list). So just move the structure to
inode itself. This also allows for a small simplification in
processing io_end structures.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We don't support delayed allocation in data=journal mode. So checking for it in
mpage_da_submit_io() doesn't make really sence. If we ever decide to extend
delayed allocation support to data=journal mode, adding
__ext4_journalled_writepage() call will be the least of problems we have to
solve. Most likely we'd have to implement separate writepages call anyways
because we don't have transaction credits for writing more than a single page
so mapping of page buffers would have to be done differently.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When we cannot write a page we should use redirty_page_for_writepage()
instead of plain set_page_dirty(). That tells writeback code we have
problems, redirties only the page (redirtying buffers is not needed),
and updates mm accounting of failed page writes.
Also move clearing of buffer dirty flag after io_submit_add_bh(). At that
moment we are sure buffer will be going to disk.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
