Currently sub routine may_leak_address() is checking regex against Perl
special variable $_ which is _fortunately_ being set correctly in a loop
before this sub routine is called. We already have declared a variable
to hold this value '$line' we should use it.
Use $line in regex match instead of implicit $_
Signed-off-by: Tobin C. Harding <me@tobin.cc>
We have git now, we don't need a version number. This was originally
added because leaking_addresses.pl shamelessly (and mindlessly) copied
checkpatch.pl
Remove version number from script.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
The pointers listed in /proc/1/syscall are user pointers, and negative
syscall args will show up like kernel addresses.
For example
/proc/31808/syscall: 0 0x3 0x55b107a38180 0x2000 0xffffffffffffffb0 \
0x55b107a302d0 0x55b107a38180 0x7fffa313b8e8 0x7ff098560d11
Skip parsing /proc/1/syscall
Suggested-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Tobin C. Harding <me@tobin.cc>
When the system is idle it is likely that most files under /proc/PID
will be identical for various processes. Scanning _all_ the PIDs under
/proc is unnecessary and implies that we are thoroughly scanning /proc.
This is _not_ the case because there may be ways userspace can trigger
creation of /proc files that leak addresses but were not present during
a scan. For these two reasons we should exclude all PID directories
under /proc except '1/'
Exclude all /proc/PID except /proc/1.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently we are repeatedly calling `uname -m`. This is causing the
script to take a long time to run (more than 10 seconds to parse
/proc/kallsyms). We can use Perl state variables to cache the result of
the first call to `uname -m`. With this change in place the script
scans the whole kernel in under a minute.
Cache machine architecture in state variable.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently script has multiple configuration arrays. This is confusing,
evident by the fact that a bunch of the entries are in the wrong place.
We can simplify the code by just having a single array for absolute
paths to skip and a single array for file names to skip wherever they
appear in the scanned directory tree. There are also currently multiple
subroutines to handle the different arrays, we can reduce these to a
single subroutine also.
Simplify the path skipping code.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently script parses binary files. Since we are scanning for
readable kernel addresses there is no need to parse binary files. We
can use Perl to check if file is binary and skip parsing it if so.
Do not parse binary files.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently script only supports x86_64 and ppc64. It would be nice to be
able to scan 32-bit machines also. We can add support for 32-bit
architectures by modifying how we check for false positives, taking
advantage of the page offset used by the kernel, and using the correct
regular expression.
Support for 32-bit machines is enabled by the observation that the kernel
addresses on 32-bit machines are larger [in value] than the page offset.
We can use this to filter false positives when scanning the kernel for
leaking addresses.
Programmatic determination of the running architecture is not
immediately obvious (current 32-bit machines return various strings from
`uname -m`). We therefore provide a flag to enable scanning of 32-bit
kernels. Also we can check the kernel config file for the offset and if
not found default to 0xc0000000. A command line option to parse in the
page offset is also provided. We do automatically detect architecture
if running on ix86.
Add support for 32-bit kernels. Add a command line option for page
offset.
Suggested-by: Kaiwan N Billimoria <kaiwan.billimoria@gmail.com>
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently there is duplicate code when checking the architecture type.
We can remove the duplication by implementing a wrapper function
is_arch().
Implement and use wrapper function is_arch().
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently script uses Perl to get the machine architecture. This can be
erroneous since Perl uses the architecture of the machine that Perl was
compiled on not the architecture of the running machine. We should use
the systems `uname` command instead.
Use `uname -m` instead of Perl to get the machine architecture.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently script only supports 4 page table levels because of the way
the kernel address regular expression is crafted. We can do better than
this. Using previously added support for kernel configuration options we
can get the number of page table levels defined by
CONFIG_PGTABLE_LEVELS. Using this value a correct regular expression can
be crafted. This only supports 5 page tables on x86_64.
Add support for 5 page table levels on x86_64.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Features that rely on the ability to get kernel configuration options
are ready to be implemented in script. In preparation for this we can
add support for kernel config options as a separate patch to ease
review.
Add support for locating and parsing kernel configuration file.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently script checks only first and last address in the vsyscall
memory range. We can do better than this. When checking for false
positives against $match, we can convert $match to a hexadecimal value
then check if it lies within the range of vsyscall addresses.
Check whole range of vsyscall addresses when checking for false
positive.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
A number of the command line options to script are dependant on the
option --input-raw being set. If we indent these options it makes
explicit this dependency.
Indent options dependant on --input-raw.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently help output includes command examples. These were cute when we
first started development of this script but are unnecessary.
Remove command examples.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
leaking_addresses.pl can be run with kptr_restrict==0 now, we don't need
the comment about setting kptr_restrict any more.
Remove comment suggesting setting kptr_restrict.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently code uses a check against an undefined variable because the
variable is a sub routine name and is not evaluated.
Evaluate subroutine; add parenthesis to sub routine name.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
There is a change in how command line parsing is done in this version.
Excludes and includes are now ordered with the file list. Since
the spec file puts the file list before the exclude list it means newer
tar ignores the excludes and packs all the build output into the
kernel-devel RPM resulting in a huge package.
Simple argument re-ordering fixes the problem.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since d5d332d3f7, a couple of links in scripts/dtc/include-prefixes
are additionally required in order to build device trees with the header
package.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Some filesystems have timestamps with coarse precision that may allow
for a recently built object file to have the same timestamp as the
updated time on one of its dependency files. When that happens, the
object file doesn't get rebuilt as it should.
This is especially the case on filesystems that don't have sub-second
time precision, such as ext3 or Ext4 with 128B inodes.
Let's prevent that by making sure updated dependency files have a newer
timestamp than the first file we created (i.e. autoksyms.h.tmpnew).
Reported-by: Thomas Lindroth <thomas.lindroth@gmail.com>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Thomas Lindroth <thomas.lindroth@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
cmd_dt_S_dtb constructs the assembly source to incorporate a devicetree
FDT (that is, the .dtb file) as binary data in the kernel image. This
assembly source contains labels before and after the binary data. The
label names incorporate the file name of the corresponding .dtb file.
Hyphens are not legal characters in labels, so .dtb files built into the
kernel with hyphens in the file name result in errors like the
following:
bcm3368-netgear-cvg834g.dtb.S: Assembler messages:
bcm3368-netgear-cvg834g.dtb.S:5: Error: : no such section
bcm3368-netgear-cvg834g.dtb.S:5: Error: junk at end of line, first unrecognized character is `-'
bcm3368-netgear-cvg834g.dtb.S:6: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_begin:'
bcm3368-netgear-cvg834g.dtb.S:8: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_end:'
bcm3368-netgear-cvg834g.dtb.S:9: Error: : no such section
bcm3368-netgear-cvg834g.dtb.S:9: Error: junk at end of line, first unrecognized character is `-'
Fix this by updating cmd_dt_S_dtb to transform all hyphens from the file
name to underscores when constructing the labels.
As of v4.16-rc2, 1139 .dts files across ARM64, ARM, MIPS and PowerPC
contain hyphens in their names, but the issue only currently manifests
on Broadcom MIPS platforms, as that is the only place where such files
are built into the kernel. For example when CONFIG_DT_NETGEAR_CVG834G=y,
or on BMIPS kernels when the dtbs target is used (in the latter case it
admittedly shouldn't really build all the dtb.o files, but thats a
separate issue).
Fixes: 695835511f ("MIPS: BMIPS: rename bcm96358nb4ser to bcm6358-neufbox4-sercom")
Signed-off-by: James Hogan <jhogan@kernel.org>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: <stable@vger.kernel.org> # 4.9+
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The bloat-o-meter script has two typos in the help, fix both.
Fixes: 192efb7a1f ("bloat-o-meter: provide 3 different arguments for data, function and All")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
kconfig.h was excluded from consideration by fixdep by
6a5be57f0f (fixdep: fix extraneous dependencies) to avoid some false
positive hits
(1) include/config/.h
(2) include/config/h.h
(3) include/config/foo.h
(1) occurred because kconfig.h contains the string CONFIG_ in a
comment. However, since dee81e9886 (fixdep: faster CONFIG_ search), we
have a check that the part after CONFIG_ is non-empty, so this does not
happen anymore (and CONFIG_ appears by itself elsewhere, so that check
is worthwhile).
(2) comes from the include guard, __LINUX_KCONFIG_H. But with the
previous patch, we no longer match that either.
That leaves (3), which amounts to one [1] false dependency (aka stat() call
done by make), which I think we can live with:
We've already had one case [2] where the lack of include/linux/kconfig.h in
the .o.cmd file caused a missing rebuild, and while I originally thought
we should just put kconfig.h in the dependency list without parsing it
for the CONFIG_ pattern, we actually do have some real CONFIG_ symbols
mentioned in it, and one can imagine some translation unit that just
does '#ifdef __BIG_ENDIAN' but doesn't through some other header
actually depend on CONFIG_CPU_BIG_ENDIAN - so changing the target
endianness could end up rebuilding the world, minus that small
TU. Quoting Linus,
... when missing dependencies cause a missed re-compile, the resulting
bugs can be _really_ subtle.
[1] well, two, we now also have CONFIG_BOOGER/booger.h - we could change
that to FOO if we care
[2] https://lkml.org/lkml/2018/2/22/838
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The string CONFIG_ quite often appears after other alphanumerics,
meaning that that instance cannot be referencing a Kconfig
symbol. Omitting these means make has fewer files to stat() when
deciding what needs to be rebuilt - for a defconfig build, this seems to
remove about 2% of the (wildcard ...) lines from the .o.cmd files.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
uml-config.h hasn't existed in this decade (87e299e5c7 - x86, um: get
rid of uml-config.h). The few remaining UML_CONFIG instances are defined
directly in terms of their real CONFIG symbol in common-offsets.h, so
unlike when the symbols got defined via a sed script, anything that uses
UML_CONFIG_FOO now should also automatically pick up a dependency on
CONFIG_FOO via the normal fixdep mechanism (since common-offsets.h
should at least recursively be a dependency). Hence I believe we should
actually be able to ignore the HELLO_CONFIG_BOOM cases.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Richard Weinberger <richard@nod.at>
Cc: user-mode-linux-devel@lists.sourceforge.net
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- suppress sparse warnings about unknown attributes
- fix typos and stale comments
- fix build error of arch/sh
- fix wrong use of ld-option vs cc-ldoption
- remove redundant GCC_PLUGINS_CFLAGS assignment
- fix another memory leak of Kconfig
- fix line number in error messages of Kconfig
- do not write confusing CONFIG_DEFCONFIG_LIST out to .config
- add xstrdup() to Kconfig to handle memory shortage errors
- show also a Debian package name if ncurses is missing
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=sr4l
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- suppress sparse warnings about unknown attributes
- fix typos and stale comments
- fix build error of arch/sh
- fix wrong use of ld-option vs cc-ldoption
- remove redundant GCC_PLUGINS_CFLAGS assignment
- fix another memory leak of Kconfig
- fix line number in error messages of Kconfig
- do not write confusing CONFIG_DEFCONFIG_LIST out to .config
- add xstrdup() to Kconfig to handle memory shortage errors
- show also a Debian package name if ncurses is missing
* tag 'kbuild-fixes-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
MAINTAINERS: take over Kconfig maintainership
kconfig: fix line number in recursive inclusion error message
Coccinelle: memdup: Fix typo in warning messages
kconfig: Update ncurses package names for menuconfig
kbuild/kallsyms: trivial typo fix
kbuild: test --build-id linker flag by ld-option instead of cc-ldoption
kbuild: drop superfluous GCC_PLUGINS_CFLAGS assignment
kconfig: Don't leak choice names during parsing
sh: fix build error for empty CONFIG_BUILTIN_DTB_SOURCE
kconfig: set SYMBOL_AUTO to the symbol marked with defconfig_list
kconfig: add xstrdup() helper
kbuild: disable sparse warnings about unknown attributes
Makefile: Fix lying comment re. silentoldconfig
When recursive inclusion is detected, the line number of the last
'included from:' is wrong.
[Test Case]
Kconfig:
-------->8--------
source "Kconfig2"
-------->8--------
Kconfig2:
-------->8--------
source "Kconfig3"
-------->8--------
Kconfig3:
-------->8--------
source "Kconfig"
-------->8--------
[Result]
$ make allyesconfig
scripts/kconfig/conf --allyesconfig Kconfig
Kconfig:1: recursive inclusion detected. Inclusion path:
current file : 'Kconfig'
included from: 'Kconfig3:1'
included from: 'Kconfig2:1'
included from: 'Kconfig:3'
scripts/kconfig/Makefile:89: recipe for target 'allyesconfig' failed
make[1]: *** [allyesconfig] Error 1
Makefile:512: recipe for target 'allyesconfig' failed
make: *** [allyesconfig] Error 2
where we expect
current file : 'Kconfig'
included from: 'Kconfig3:1'
included from: 'Kconfig2:1'
included from: 'Kconfig:1'
The 'iter->lineno+1' in the second fpinrtf() should be 'iter->lineno-1'.
I refactored the code to merge the two fprintf() calls.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
The package name is ncurses-devel for Redhat based distros
and libncurses-dev for Debian based distros.
Signed-off-by: Arvind Prasanna <arvindprasanna@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
GCC_PLUGINS_CFLAGS is already in the environment, so it is superfluous
to add it in commandline of final build of init/.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The named choice is not used in the kernel tree, but if it were used,
it would not be freed.
The intention of the named choice can be seen in the log of
commit 5a1aa8a1af ("kconfig: add named choice group").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
The 'defconfig_list' is a weird attribute. If the '.config' is
missing, conf_read_simple() iterates over all visible defaults,
then it uses the first one for which fopen() succeeds.
config DEFCONFIG_LIST
string
depends on !UML
option defconfig_list
default "/lib/modules/$UNAME_RELEASE/.config"
default "/etc/kernel-config"
default "/boot/config-$UNAME_RELEASE"
default "$ARCH_DEFCONFIG"
default "arch/$ARCH/defconfig"
However, like other symbols, the first visible default is always
written out to the .config file. This might be different from what
has been actually used.
For example, on my machine, the third one "/boot/config-$UNAME_RELEASE"
is opened, like follows:
$ rm .config
$ make oldconfig 2>/dev/null
scripts/kconfig/conf --oldconfig Kconfig
#
# using defaults found in /boot/config-4.4.0-112-generic
#
*
* Restart config...
*
*
* IRQ subsystem
*
Expose irq internals in debugfs (GENERIC_IRQ_DEBUGFS) [N/y/?] (NEW)
However, the resulted .config file contains the first one since it is
visible:
$ grep CONFIG_DEFCONFIG_LIST .config
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
In order to stop confusing people, prevent this CONFIG option from
being written to the .config file.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
We already have xmalloc(), xcalloc(), and xrealloc((). Add xstrdup()
as well to save tedious error handling.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Disable retpoline validation in objtool if your compiler sucks, and otherwise
select the validation stuff for CONFIG_RETPOLINE=y (most builds would already
have it set due to ORC).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
David allowed retpolines in .init.text, except for modules, which will
trip up objtool retpoline validation, fix that.
Requested-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
David requested a objtool validation pass for CONFIG_RETPOLINE=y enabled
builds, where it validates no unannotated indirect jumps or calls are
left.
Add an additional .discard.retpoline_safe section to allow annotating
the few indirect sites that are required and safe.
Requested-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Makefile changes:
- enable unused-variable warning that was wrongly disabled for clang
Kconfig changes:
- warn blank 'help' and fix existing instances
- fix 'choice' behavior to not write out invisible symbols
- fix misc weirdness
Coccinell changes:
- fix false positive of free after managed memory alloc detection
- improve performance of NULL dereference detection
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jy5l
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
"Makefile changes:
- enable unused-variable warning that was wrongly disabled for clang
Kconfig changes:
- warn about blank 'help' and fix existing instances
- fix 'choice' behavior to not write out invisible symbols
- fix misc weirdness
Coccinell changes:
- fix false positive of free after managed memory alloc detection
- improve performance of NULL dereference detection"
* tag 'kbuild-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits)
kconfig: remove const qualifier from sym_expand_string_value()
kconfig: add xrealloc() helper
kconfig: send error messages to stderr
kconfig: echo stdin to stdout if either is redirected
kconfig: remove check_stdin()
kconfig: remove 'config*' pattern from .gitignnore
kconfig: show '?' prompt even if no help text is available
kconfig: do not write choice values when their dependency becomes n
coccinelle: deref_null: avoid useless computation
coccinelle: devm_free: reduce false positives
kbuild: clang: disable unused variable warnings only when constant
kconfig: Warn if help text is blank
nios2: kconfig: Remove blank help text
arm: vt8500: kconfig: Remove blank help text
MIPS: kconfig: Remove blank help text
MIPS: BCM63XX: kconfig: Remove blank help text
lib/Kconfig.debug: Remove blank help text
Staging: rtl8192e: kconfig: Remove blank help text
Staging: rtl8192u: kconfig: Remove blank help text
mmc: kconfig: Remove blank help text
...
This function returns realloc'ed memory, so the returned pointer
must be passed to free() when done. So, 'const' qualifier is odd.
It is allowed to modify the expanded string.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
We already have xmalloc(), xcalloc(). Add xrealloc() as well
to save tedious error handling.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
These messages should be directed to stderr.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
If stdio is not tty, conf_askvalue() puts additional new line to
prevent prompts from being concatenated into a single line. This
care is missing in conf_choice(), so a 'choice' prompt and the next
prompt are shown in the same line.
Move the code into xfgets() to cater to all cases. To improve this
more, let's echo stdin to stdout. This clarifies what keys were
input from stdio and the stdout looks like as if it were from tty.
I removed the isatty(2) check since stderr is unrelated here.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
Except silentoldconfig, valid_stdin is 1, so check_stdin() is no-op.
oldconfig and silentoldconfig work almost in the same way except that
the latter generates additional files under include/. Both ask users
for input for new symbols.
I do not know why only silentoldconfig requires stdio be tty.
$ rm -f .config; touch .config
$ yes "" | make oldconfig > stdout
$ rm -f .config; touch .config
$ yes "" | make silentoldconfig > stdout
make[1]: *** [silentoldconfig] Error 1
make: *** [silentoldconfig] Error 2
$ tail -n 4 stdout
Console input/output is redirected. Run 'make oldconfig' to update configuration.
scripts/kconfig/Makefile:40: recipe for target 'silentoldconfig' failed
Makefile:507: recipe for target 'silentoldconfig' failed
Redirection is useful, for example, for testing where we want to give
particular key inputs from a test file, then check the result.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
I could not figure out why this pattern should be ignored.
Checking commit 1e65174a33 ("Add some basic .gitignore files")
did not help.
Let's remove this pattern, then see if it is really needed.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
'make config', 'make oldconfig', etc. always receive '?' as a valid
input and show useful information even if no help text is available.
------------------------>8------------------------
foo (FOO) [N/y] (NEW) ?
There is no help available for this option.
Symbol: FOO [=n]
Type : bool
Prompt: foo
Defined at Kconfig:1
------------------------>8------------------------
However, '?' is not shown in the prompt if its help text is missing.
Let's show '?' all the time so that the prompt and the behavior match.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
"# CONFIG_... is not set" for choice values are wrongly written into
the .config file if they are once visible, then become invisible later.
Test case
---------
---------------------------(Kconfig)----------------------------
config A
bool "A"
choice
prompt "Choice ?"
depends on A
config CHOICE_B
bool "Choice B"
config CHOICE_C
bool "Choice C"
endchoice
----------------------------------------------------------------
---------------------------(.config)----------------------------
CONFIG_A=y
----------------------------------------------------------------
With the Kconfig and .config above,
$ make config
scripts/kconfig/conf --oldaskconfig Kconfig
*
* Linux Kernel Configuration
*
A (A) [Y/n] n
#
# configuration written to .config
#
$ cat .config
#
# Automatically generated file; DO NOT EDIT.
# Linux Kernel Configuration
#
# CONFIG_A is not set
# CONFIG_CHOICE_B is not set
# CONFIG_CHOICE_C is not set
Here,
# CONFIG_CHOICE_B is not set
# CONFIG_CHOICE_C is not set
should not be written into the .config file because their dependency
"depends on A" is unmet.
Currently, there is no code that clears SYMBOL_WRITE of choice values.
Clear SYMBOL_WRITE for all symbols in sym_calc_value(), then set it
again after calculating visibility. To simplify the logic, set the
flag if they have non-n visibility, regardless of types, and regardless
of whether they are choice values or not.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
The effect of the rules ifm1, pr11, and pr12 is only used in the final rule,
which depends on context && !org && !report. Thus these rules should only
be performed in those circumstances.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Some files use both a non-devm allocation and a devm_allocation. Don't
complain about a free when the same function contains a non-devm
allocation.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
