This patch spits out the time taken by the various steps in the
journal recover process. Previously, the journal recovery time
didn't account for finding the journal head in the log which takes
up a significant portion of time.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Instead of zeroing out fallocated blocks in gfs2_iomap_alloc, zero them
out in fallocate_chunk, much higher up the call stack. This gets rid of
gfs2's abuse of the IOMAP_ZERO flag as well as the gfs2 specific zeronew
buffer flag. I can't think of a reason why zeroing out the blocks in
gfs2_iomap_alloc would have any benefits: there is no additional locking
at that level that would add protection to the newly allocated blocks.
While at it, change fallocate over from gs2_block_map to gfs2_iomap_begin.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
And use it in a few more places rather than opencoding the values.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
I_DIRTY_DATASYNC is a strict superset of I_DIRTY_SYNC semantics, as
in mark dirty to be written out by fdatasync as well. So dirtying
for both flags makes no sense.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When punching a hole or truncating an inode down to a given size, also
check if the truncate point / start of the hole is within the range we
have metadata for. Otherwise, we can end up freeing blocks that
shouldn't be freed, corrupting the inode, or crashing the machine when
trying to punch a hole into the void.
When growing an inode via truncate, we set the new size but we don't
allocate additional levels of indirect blocks and grow the inode height.
When shrinking that inode again, the new size may still point beyond the
end of the inode's metadata.
Fixes xfstest generic/476.
Debugged-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
In the gfs2_iomap_end tracepoint, log the physical block address, just
as in the gfs2_bmap tracepoint.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, GFS2 was setting the PageChecked flag for ordered
write pages. This is unnecessary. The ext3 file system only does it
for jdata, and it's only used in jdata circumstances. It only muddies
the already murky waters of writing pages in the aops.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Function gfs2_remove_from_ail is only ever used from log.c, so there
is no reason to declare it extern. This patch removes the extern and
declares it static.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Mark the source inode dirty during a rename instead of just updating the
underlying buffer head. Otherwise, fsync may find the inode clean and
will then skip flushing the journal. A subsequent power failure will
cause the rename to be lost. This happens in command sequences like:
xfs_io -f -c 'pwrite 0 4096' -c 'fsync' foo
mv foo bar
xfs_io -c 'fsync' bar
# power failure
Fixes xfstests generic/322, generic/376.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
The chunk size of allocations in __gfs2_fallocate is calculated
incorrectly. The size can collapse, causing __gfs2_fallocate to
allocate one block at a time, which is very inefficient. This needs
fixing in two places:
In gfs2_quota_lock_check, always set ap->allowed to UINT_MAX to indicate
that there is no quota limit. This fixes callers that rely on
ap->allowed to be set even when quotas are off.
In __gfs2_fallocate, reset max_blks to UINT_MAX in each iteration of the
loop to make sure that allocation limits from one resource group won't
spill over into another resource group.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
It turns out that commit 3229c18c0d6b2 'Fixes to "Implement iomap for
block_map"' introduced another bug in gfs2_iomap_begin that can cause
gfs2_block_map to set bh->b_size of an actual buffer to 0. This can
lead to arbitrary incorrect behavior including crashes or disk
corruption. Revert the incorrect part of that commit.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
It turns out that commit 3974320ca6 "Implement iomap for block_map"
introduced a few bugs that trigger occasional failures with xfstest
generic/476:
In gfs2_iomap_begin, we jump to do_alloc when we determine that we are
beyond the end of the allocated metadata (height > ip->i_height).
There, we can end up calling hole_size with a metapath that doesn't
match the current metadata tree, which doesn't make sense. After
untangling the code at do_alloc, fix this by checking if the block we
are looking for is within the range of allocated metadata.
In addition, add a BUG() in case gfs2_iomap_begin is accidentally called
for reading stuffed files: this is handled separately. Make sure we
don't truncate iomap->length for reads beyond the end of the file; in
that case, the entire range counts as a hole.
Finally, revert to taking a bitmap write lock when doing allocations.
It's unclear why that change didn't lead to any failures during testing.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Restore an optimization removed in commit 7f19449553 "Fix debugfs glocks
dump": keep the glock hash table iterator active while the glock dump
file is held open. This avoids having to rescan the hash table from the
start for each read, with quadratically rising runtime.
In addition, use rhastable_walk_peek for resuming a glock dump at the
current position: when a glock doesn't fit in the provided buffer
anymore, the next read must revisit the same glock.
Finally, also restart the dump from the first entry when we notice that
the hash table has been resized in gfs2_glock_seq_start.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Depend on LIBCRC32C which uses the crypto API to select the appropriate
crc32c implementation. With the CRYPTO and CRYPTO_CRC32C dependencies,
gfs2 would still need to use the crypto API directly like ext4 and btrfs
do, which isn't necessary.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Pull networking updates from David Miller:
1) Significantly shrink the core networking routing structures. Result
of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf
2) Add netdevsim driver for testing various offloads, from Jakub
Kicinski.
3) Support cross-chip FDB operations in DSA, from Vivien Didelot.
4) Add a 2nd listener hash table for TCP, similar to what was done for
UDP. From Martin KaFai Lau.
5) Add eBPF based queue selection to tun, from Jason Wang.
6) Lockless qdisc support, from John Fastabend.
7) SCTP stream interleave support, from Xin Long.
8) Smoother TCP receive autotuning, from Eric Dumazet.
9) Lots of erspan tunneling enhancements, from William Tu.
10) Add true function call support to BPF, from Alexei Starovoitov.
11) Add explicit support for GRO HW offloading, from Michael Chan.
12) Support extack generation in more netlink subsystems. From Alexander
Aring, Quentin Monnet, and Jakub Kicinski.
13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From
Russell King.
14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso.
15) Many improvements and simplifications to the NFP driver bpf JIT,
from Jakub Kicinski.
16) Support for ipv6 non-equal cost multipath routing, from Ido
Schimmel.
17) Add resource abstration to devlink, from Arkadi Sharshevsky.
18) Packet scheduler classifier shared filter block support, from Jiri
Pirko.
19) Avoid locking in act_csum, from Davide Caratti.
20) devinet_ioctl() simplifications from Al viro.
21) More TCP bpf improvements from Lawrence Brakmo.
22) Add support for onlink ipv6 route flag, similar to ipv4, from David
Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits)
tls: Add support for encryption using async offload accelerator
ip6mr: fix stale iterator
net/sched: kconfig: Remove blank help texts
openvswitch: meter: Use 64-bit arithmetic instead of 32-bit
tcp_nv: fix potential integer overflow in tcpnv_acked
r8169: fix RTL8168EP take too long to complete driver initialization.
qmi_wwan: Add support for Quectel EP06
rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK
ipmr: Fix ptrdiff_t print formatting
ibmvnic: Wait for device response when changing MAC
qlcnic: fix deadlock bug
tcp: release sk_frag.page in tcp_disconnect
ipv4: Get the address of interface correctly.
net_sched: gen_estimator: fix lockdep splat
net: macb: Handle HRESP error
net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring
ipv6: addrconf: break critical section in addrconf_verify_rtnl()
ipv6: change route cache aging logic
i40e/i40evf: Update DESC_NEEDED value to reflect larger value
bnxt_en: cleanup DIM work on device shutdown
...
Some of the info, warning, and error messages are missing their trailing
newline.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
The vfs clears the I_DIRTY inode flag before calling gfs2_write_inode()
having queued any data that needed to be written to disk.
This is a good time to remove such inodes from our ordered write list
so they don't hang around for long periods of time.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, if function gfs2_unlink failed to get a valid
transaction (for example, not enough journal blocks) it would go
to label out_end_trans which did gfs2_trans_end. But if the
trans_begin failed, there's no transaction to end, and trying to
do so results in: kernel BUG at fs/gfs2/trans.c:117!
This patch changes the goto so that it does not try to end a
non-existent transaction.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This patch just adds the capability for GFS2 to track which function
called gfs2_log_flush. This should make it easier to diagnose
problems based on the sequence of events found in the journals.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch adds a new structure called gfs2_log_header_v2 which is used
to store expanded fields into previously unused areas of the log headers
(i.e., this change is backwards compatible). Some of these are used for
debug purposes so we can backtrack when problems occur. Others are
reserved for future expansion.
This patch is based on a prototype from Steve Whitehouse.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Get rid of gfs2_log_header_in by integrating it into get_log_header.
Clean up the crc32 computations and use the same functions for encoding
and decoding to make things less confusing. Eliminate lh_hash from
gfs2_log_header_host which is completely useless.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
The to parameter of gfs2_page_add_databufs is passed inconsistently:
once as from + len, once as from + len - 1. Just pass len instead.
In addition, once we're past the end, we can immediately break out of
the loop.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Add a small inline function for computing the maximum size of a stuffed
inode instead of open coding that in several places throughout the code.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Implement the top-level bits of punching a hole into a file.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Add an upper bound to the range of blocks to deallocate blocks to
function trunc_dealloc so that this function can be used for truncating
a file as well as for punching a hole into a file.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Pull the code for computing the range of metapointers to iterate out of
gfs2_metapath_ra (for readahead), sweep_bh_for_rgrps (for deallocating
metapointers within a block), and trunc_dealloc (for walking the
metadata tree).
In sweep_bh_for_rgrps, move the code for looking up the resource group
descriptor of the current resource group out of the inner loop. The
metatype check moves to trunc_dealloc.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Turn gfs2_block_truncate_page into a function that zeroes a range within
a block rather than only the end of a block. This will be used for
cleaning the end of the first partial block and the start of the last
partial block when punching a hole in a file.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
In rare cases, the current non-recursive delete algorithm doesn't
deallocate empty intermediary indirect blocks. This should have very
little practical effect, but deallocating all blocks correctly should
still be preferable as it is cleaner and easier to validate.
The fix consists of using the first block to deallocate to compute the
start marker of the truncate point instead of the last block that needs
to be kept. With that change, computing which indirect blocks are still
needed becomes relatively easy.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
The metadata read-ahead algorithm broke when switching from recursive to
non-recursive delete: the current algorithm reads ahead blocks at height
N - 1 while deallocating the blocks at hight N. However, deallocating
the blocks at height N requires a complete walk of the metadata tree,
not only down to height N - 1. Consequently, all blocks below height
N - 1 will be accessed without read-ahead.
Fix this by issuing read-aheads as early as possible, after each
metapath lookup.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Split out the entire lookup loop from lookup_metapath and
fillup_metapath. Make both functions return the actual height in
mp->mp_aheight, and return 0 on success. Handle lookup errors properly
in trunc_dealloc.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
First, this function truncates the file in chunks. When the original
file size isn't block aligned, each chunk that is truncated will remain
be misaligned. This is inefficient.
Second, this function doesn't recognize where holes are, so it loops
through them. For each chunk of a hole, it creates a new transaction.
At least avoid creating another transactions whe the current one is
still empty. (An better fix would be to skip large holes, of course.)
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
The current transaction is being dereferenced before asserting that is
not NULL; that isn't going to help.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Document when to use gfs2_blk2rgrpd for "inexact" resource group
matching. Based on that, fix an incorrect use of gfs2_blk2rgrpd in
sweep_bh_for_rgrps.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
We iterate through the entire ordered writes list in
gfs2_ordered_write() to write out inodes. It's a good
place to try and shrink the list by throwing out inodes
that don't have any pages.
Signed-off-by: Abhi Das <adas@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, there was a lot of code redundancy between functions
log_write_header (which uses bio) and clean_journal (which uses
buffer_head). This patch reduces the redundancy to simplify the code
and make log header writing more consistent. We want more consistency
and reduced redundancy because we plan to add a bunch of new fields
to improve performance (by eliminating the local statfs and quota files)
improve metadata integrity (by adding new crcs and such) and for better
debugging (by adding new fields to track when and where metadata was
pushed through the journals.) We don't want to duplicate setting these
new fields, nor allow for human error in the process.
This reduction in code redundancy is accomplished by introducing a new
helper function, gfs2_write_log_header which uses bio rather than bh.
That simplifies recovery function clean_journal() to use the new helper
function and iomap rather than redundancy and block_map (and eventually
we can maybe remove block_map). It also reduces our dependency on
buffer_heads.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Add the rg_crc field to store a crc32 of the gfs2_rgrp structure. This
allows us to check resource group headers' integrity and removes the
requirement to check them against the rindex entries in fsck. If this
field is found to be zero, it should be ignored (or updated with an
accurate value).
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Add rg_data0, rg_data and rg_bitbytes to struct gfs2_rgrp. The fields
are identical to their counterparts in struct gfs2_rindex and are
intended to reduce the use of the rindex. For now the fields are only
written back as the in-memory equivalents in struct gfs2_rgrpd are set
using values from the rindex. However, they are needed at this point so
that userspace can make use of them, allowing a migration away from the
rindex over time.
The new fields take up previously reserved space which was explicitly
zeroed on write so, in clusters with mixed kernels, these fields could
get zeroed after being set and this should not be treated as an error.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Add a new rg_skip field to struct gfs2_rgrp, replacing __pad. The
rg_skip field has the following meaning:
- If rg_skip is zero, it is considered unset and not useful.
- If rg_skip is non-zero, its value will be the number of blocks between
this rgrp's address and the next rgrp's address. This can be used as a
hint by fsck.gfs2 when rebuilding a bad rindex, for example.
This will provide less dependency on the rindex in future, and allow
tools such as fsck.gfs2 to iterate the resource groups without keeping
the rindex around.
The field is updated in gfs2_rgrp_out() so that existing file systems
will have it set. This means that any resource groups that aren't ever
written will not be updated. The final rgrp is a special case as there
is no next rgrp, so it will always have a rg_skip of 0 (unless the fs is
extended).
Before this patch, gfs2_rgrp_out() zeroes the __pad field explicitly, so
the rg_skip field can get set back to 0 in cases where nodes with and
without this patch are mixed in a cluster. In some cases, the field may
bounce between being set by one node and then zeroed by another which
may harm performance slightly, e.g. when two nodes create many small
files. In testing this situation is rare but it becomes more likely as
the filesystem fills up and there are fewer resource groups to choose
from. The problem goes away when all nodes are running with this patch.
Dipping into the space currently occupied by the rg_reserved field would
have resulted in the same problem as it is also explicitly zeroed, so
unfortunately there is no other way around it.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Most callers of rhashtable_walk_start don't care about a resize event
which is indicated by a return value of -EAGAIN. So calls to
rhashtable_walk_start are wrapped wih code to ignore -EAGAIN. Something
like this is common:
ret = rhashtable_walk_start(rhiter);
if (ret && ret != -EAGAIN)
goto out;
Since zero and -EAGAIN are the only possible return values from the
function this check is pointless. The condition never evaluates to true.
This patch changes rhashtable_walk_start to return void. This simplifies
code for the callers that ignore -EAGAIN. For the few cases where the
caller cares about the resize event, particularly where the table can be
walked in mulitple parts for netlink or seq file dump, the function
rhashtable_walk_start_check has been added that returns -EAGAIN on a
resize event.
Signed-off-by: Tom Herbert <tom@quantonium.net>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a pure automated search-and-replace of the internal kernel
superblock flags.
The s_flags are now called SB_*, with the names and the values for the
moment mirroring the MS_* flags that they're equivalent to.
Note how the MS_xyz flags are the ones passed to the mount system call,
while the SB_xyz flags are what we then use in sb->s_flags.
The script to do this was:
# places to look in; re security/*: it generally should *not* be
# touched (that stuff parses mount(2) arguments directly), but
# there are two places where we really deal with superblock flags.
FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
include/linux/fs.h include/uapi/linux/bfs_fs.h \
security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
# the list of MS_... constants
SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
ACTIVE NOUSER"
SED_PROG=
for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done
# we want files that contain at least one of MS_...,
# with fs/namespace.c and fs/pnode.c excluded.
L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')
for f in $L; do sed -i $f $SED_PROG; done
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As a follow-up to commit d2bc5b3c67, remove the end parameter which is
now unused.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
init_gfs2_fs() is calling e.g. calling unregister_shrinker() without
register_shrinker() when an error occurred during initialization.
Rename goto labels and call appropriate undo function.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, function gfs2_free_di was 4 lines of code, and
one of those lines was to call gfs2_free_uninit_di. Although
unlikely, if function gfs2_free_uninit_di encountered an error
finding the block to be freed, the error was silently ignored by the
caller, which went ahead and improperly did a quota-change operation
and meta_wipe despite the error. This patch combines the two
functions into one to make the code more readable and fixes the bug
by returning from the combined function before it takes those next
incorrect steps.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Every pagevec_init user claims the pages being released are hot even in
cases where it is unlikely the pages are hot. As no one cares about the
hotness of pages being released to the allocator, just ditch the
parameter.
No performance impact is expected as the overhead is marginal. The
parameter is removed simply because it is a bit stupid to have a useless
parameter copied everywhere.
Link: http://lkml.kernel.org/r/20171018075952.10627-6-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All users of pagevec_lookup() and pagevec_lookup_range() now pass
PAGEVEC_SIZE as a desired number of pages. Just drop the argument.
Link: http://lkml.kernel.org/r/20171009151359.31984-15-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We want only pages from given range in gfs2_write_cache_jdata(). Use
pagevec_lookup_range_tag() instead of pagevec_lookup_tag() and remove
unnecessary code.
Link: http://lkml.kernel.org/r/20171009151359.31984-9-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
patches are basically in three categories: (1) patches related to
broken xfstest cases, (2) patches related to improving iomap and
start using it in GFS2, and (3) general typos and clarifications.
Please note that one of the iomap patches extends beyond GFS2 and
affects other file systems, but it was publically reviewed by a
variety of file system people in the community.
1. Andreas has a patch that simply renames variable 'bsize' to 'factor'
to clarify the logic related to gfs2_block_map.
2. He also has a patch to correctly set ctime in the setflags ioctl,
which fixes broken xfstests test 277.
3. He also fixed broken xfstest 258, due to an atime initialization
problem.
4. He also fixed broken xfstest 307, in which GFS2 was not setting
ctime when setting acls.
5. He has a patch to switch general iomap code from blkno to disk
offset for a variety of file systems.
6. He has a patch to add a new IOMAP_F_DATA_INLINE flag for iomap
to indicate blocks that have data mixed with metadata.
7. I contributed a patch to make inode height info part of the
'metapath' data structure to facilitate using iomap in GFS2.
8. I have a patch to start using iomap inside GFS2 and switch GFS2's
block_map functions to use iomap under the covers.
9. I have a patch to switch GFS2's fiemap implementation from using
block_map to using iomap under the covers.
10. Andreas has a patch to implement SEEK_HOLE and SEEK_DATA via
iomap in GFS2.
11. I have a patch related to journaled data pages not being properly
synced to media when writing inodes. This was caught with xfstests.
12. I have a patch to fix another failing xfstest case in which
switching a file from ordered_write to journaled data via set_flags
caused a deadlock.
13. Andreas has a patch to fix failing xfstest case 066, which was
due to not properly syncing dirty inodes when changing extended
attributes.
14. Andreas fixed a minor typo in a comment.
15. Andreas contributed a patch to partially fix xfstest 424, which
involved GET_FLAGS and SET_FLAGS ioctl. This is also a cleanup
and simplification of the translation of flags from fs flags to
gfs2 flags.
16. He also added support for STATX_ATTR_ in statx, which fixed broken
xfstest 424.
17. He also contributed a fix for failing xfstest 093 which fixes a
recursive glock problem with gfs2_xattr_get and _set.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaCx5uAAoJENeLYdPf93o7Nb8H/RLJ2CsEbTSJQ82RH4eptoxe
XbQ4HVig9Hm8k5teSTH9DdVypkxjPtbJZY9k1Y4mEtddtCZ/yS407aTdr/pP0C5r
3W8Ouu2JXmqPKWg0sp3wC/Pji2ThCYssQXNyBSDPADsF2C8XEuT7aL/YPzMitIdm
Lxa9JHo1tKgdFnkloNyaTt4MdBGNF5M5UBr6KgRfwhgooHWbxM0rNyZIXJtySb0I
vsaNNOA7a4VQp1Fo1DkHQomNbOG5hpVKfswUOOZvk2RdAewTPN+jXiOAmIhNjQ3Y
/PkJLjRCf8Ob/VIYmt2BTs16+07mODGv1d6DuhgXzH/dfiVihVGvVo71DxXx5uw=
=i8b2
-----END PGP SIGNATURE-----
Merge tag 'gfs2-4.15.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Bob Peterson:
"We've got a total of 17 GFS2 patches for this merge window. The
patches are basically in three categories: (1) patches related to
broken xfstest cases, (2) patches related to improving iomap and start
using it in GFS2, and (3) general typos and clarifications.
Please note that one of the iomap patches extends beyond GFS2 and
affects other file systems, but it was publically reviewed by a
variety of file system people in the community.
From Andreas Gruenbacher:
- rename variable 'bsize' to 'factor' to clarify the logic related to
gfs2_block_map.
- correctly set ctime in the setflags ioctl, which fixes broken
xfstests test 277.
- fix broken xfstest 258, due to an atime initialization problem.
- fix broken xfstest 307, in which GFS2 was not setting ctime when
setting acls.
- switch general iomap code from blkno to disk offset for a variety
of file systems.
- add a new IOMAP_F_DATA_INLINE flag for iomap to indicate blocks
that have data mixed with metadata.
- implement SEEK_HOLE and SEEK_DATA via iomap in GFS2.
- fix failing xfstest case 066, which was due to not properly syncing
dirty inodes when changing extended attributes.
- fix a minor typo in a comment.
- partially fix xfstest 424, which involved GET_FLAGS and SET_FLAGS
ioctl. This is also a cleanup and simplification of the translation
of flags from fs flags to gfs2 flags.
- add support for STATX_ATTR_ in statx, which fixed broken xfstest
424.
- fix for failing xfstest 093 which fixes a recursive glock problem
with gfs2_xattr_get and _set
From me:
- make inode height info part of the 'metapath' data structure to
facilitate using iomap in GFS2.
- start using iomap inside GFS2 and switch GFS2's block_map functions
to use iomap under the covers.
- switch GFS2's fiemap implementation from using block_map to using
iomap under the covers.
- fix journaled data pages not being properly synced to media when
writing inodes. This was caught with xfstests.
- fix another failing xfstest case in which switching a file from
ordered_write to journaled data via set_flags caused a deadlock"
* tag 'gfs2-4.15.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Allow gfs2_xattr_set to be called with the glock held
gfs2: Add support for statx inode flags
gfs2: Fix and clean up {GET,SET}FLAGS ioctl
gfs2: Fix a harmless typo
gfs2: Fix xattr fsync
GFS2: Take inode off order_write list when setting jdata flag
GFS2: flush the log and all pages for jdata as we do for WB_SYNC_ALL
gfs2: Implement SEEK_HOLE / SEEK_DATA via iomap
GFS2: Switch fiemap implementation to use iomap
GFS2: Implement iomap for block_map
GFS2: Make height info part of metapath
gfs2: Always update inode ctime in set_acl
gfs2: Support negative atimes
gfs2: Update ctime in setflags ioctl
gfs2: Clarify gfs2_block_map
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On the following call path:
gfs2_setattr -> setattr_prepare -> ... ->
cap_inode_killpriv -> ... ->
gfs2_xattr_set
the glock is locked in gfs2_setattr, so check for recursive locking in
gfs2_xattr_set as gfs2_xattr_get already does. While at it, get rid of
need_unlock in gfs2_xattr_get.
Fixes xfstest generic/093.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Add support for the STATX_ATTR_ flags in statx. (Compression,
encryption, and the nodump flag are not supported by gfs2.)
Partially fixes xfstest generic/424.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Switch to a simple array for mapping between the FS_*_FL and GFS_DIF_*
flags. Clarify how the mapping between FS_JOURNAL_DATA_FL and the
filesystem flags works. The GFS2_DIF_SYSTEM flag cannot be set from
user space, so remove it from GFS2_FLAGS_USER_SET. Fail with -EINVAL
when trying to set flags that are not supported instead of silently
ignoring those flags.
Partially fixes xfstest generic/424.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Make sure that changing xattrs marks the corresponding inode dirty so
that a subsequent fsync will sync those changes to disk. We set
I_DIRTY_SYNC as well as I_DIRTY_DATASYNC so that both fsync and
fdatasync will sync xattr changes: xattrs can contain information
critical to how the data can be accessed, so we don't want fdatasync
to skip them.
Fixes xfstest generic/066.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This patch fixes a deadlock caused when the jdata flag is set for
inodes that are already on the ordered write list. Since it is
on the ordered write list, log_flush calls gfs2_ordered_write which
calls filemap_fdatawrite. But since the inode had the jdata flag
set, that calls gfs2_jdata_writepages, which tries to start a new
transaction. A new transaction cannot be started because it tries
to acquire the log_flush rwsem which is already locked by the log
flush operation.
The bottom line is: We cannot switch an inode from ordered to jdata
until we eliminate any ordered data pages (via log flush) or any
log_flush operation afterward will create the circular dependency
above. So we need to flush the log before setting the diskflags to
switch the file mode, then we need to remove the inode from the
ordered writes list.
Before this patch, the log flush was done for jdata->ordered, but
that's wrong. If we're going from jdata to ordered, we don't need
to call gfs2_log_flush because the call to filemap_fdatawrite will
do it for us:
filemap_fdatawrite() -> __filemap_fdatawrite_range()
__filemap_fdatawrite_range() -> do_writepages()
do_writepages() -> gfs2_jdata_writepages()
gfs2_jdata_writepages() -> gfs2_log_flush()
This patch modifies function do_gfs2_set_flags so that if a file
has its jdata flag set, and it's already on the ordered write list,
the log will be flushed and it will be removed from the list
before setting the flag.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Abhijith Das <adas@redhat.com>
In function gfs2_write_inode, starting with patch a9185b41a4, we
only flush the log and call filemap_fdatawait if we're passed in a
wbc sync_mode of WB_SYNC_ALL. We also need to do these things if
we're evicting a jdata inode, because we might have jdata pages
still attached to bufdata descriptors that need to be revoked, but
by the time it gets to evict() it's too late to start a new
transaction. This patch changes it to treat jdata inodes as if
WB_SYNC_ALL had been specified.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Abhijith Das <adas@redhat.com>
This patch switches GFS2's implementation of fiemap from the old
block_map code to the new iomap interface.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch implements iomap for block mapping, and switches the
block_map function to use it under the covers.
The additional IOMAP_F_BOUNDARY iomap flag indicates when iomap has
reached a "metadata boundary" and fetching the next mapping is likely to
incur an additional I/O. This flag is used for setting the bh buffer
boundary flag.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch eliminates height parameters from function gfs2_bmap_alloc.
Function find_metapath determines the metapath's "find height", also
known as the desired height. Function lookup_metapath determines the
metapath's "actual height", previously known as starting height or
sheight. Function gfs2_bmap_alloc now gets both height values from
the metapath. This simplification was done as a step toward switching
the block_map functions to using iomap. The bh_map responsibilities
are also removed from function gfs2_bmap_alloc for the same reason.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This tag is meant for pulling a patch called "gfs2: Fix
debugfs glocks dump" which fixes a regression introduced
by commit 88ffbf3e03. The regression caused the glock
dump in debugfs to not report all the glocks, which makes
debugging extremely difficult.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZyUI8AAoJENeLYdPf93o7iq4IAKhb9wJ8kmpu7LZ5k6Fl8BCy
GFztPe2bKsFG8cul1o1gZx8c/GWORaCHe3ZDI6pxl16/E+AvWoA1pKbBLYB1GSvD
90a7/m6+hx02ZXR/MHxBUQLWYXBtBrVMVcZDCmFMHWYCRUIiX2etPZL8wOXeJLTl
lNCSGdd1+3y6IJbthaIKTt1ctzsR8ZqV4QN786d2C3L9dxZ63FnAV43p3rUBzBLX
B5uT5LTmdWSLRqe0A9rnrPga/BfEnA8GDtIYUMic9Yz0Hq2a3vEnCC3P3Myp0DJZ
PGposwqL/emRhXkC4+ICrGsTOIy1BzwMXLF47GQaB/k+2Rd3/l9r/hU5ESjQOgA=
=taQL
-----END PGP SIGNATURE-----
Merge tag 'gfs2-for-linus-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fix from Bob Peterson:
"GFS2: Fix an old regression in GFS2's debugfs interface
This fixes a regression introduced by commit 88ffbf3e03 ("GFS2: Use
resizable hash table for glocks"). The regression caused the glock dump
in debugfs to not report all the glocks, which makes debugging
extremely difficult"
* tag 'gfs2-for-linus-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix debugfs glocks dump
Three-entry POSIX ACLs can be stored in the file mode permission bits,
with no need to store them in extended attributes. When a process sets
such a minimal ACL, the kernel updates the file mode like chmod does,
and removes any existing extended attributes for that ACL. Make sure
the ctime is always updated in that case.
Fixes xfstest generic/307.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
When inodes are read from disk, GFS2 will only update in-memory atimes
older than the on-disk atimes; this prevents atimes from going
backwards. The atimes of newly allocated inodes are initialized to 0.
This means that when an atime is explicitly set to a negative value,
this value will not persist.
Fix by setting the atime of newly allocated inodes to the lowest
possible value instead of 0.
Fixes xfstest generic/258.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
The FS_IOC_SETFLAGS ioctl is supposed to update the inode ctime.
Fixes xfstests generic/277.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Add a comment about the logical block size for directories. Rename
"bsize" in gfs2_block_map to "factor". Fix a typo in the description of
metaptr1.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
The switch to rhashtables (commit 88ffbf3e03) broke the debugfs glock
dump (/sys/kernel/debug/gfs2/<device>/glocks) for dumps bigger than a
single buffer: the right function for restarting an rhashtable iteration
from the beginning of the hash table is rhashtable_walk_enter;
rhashtable_walk_stop + rhashtable_walk_start will just resume from the
current position.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Cc: stable@vger.kernel.org # v4.3+
Pull mount flag updates from Al Viro:
"Another chunk of fmount preparations from dhowells; only trivial
conflicts for that part. It separates MS_... bits (very grotty
mount(2) ABI) from the struct super_block ->s_flags (kernel-internal,
only a small subset of MS_... stuff).
This does *not* convert the filesystems to new constants; only the
infrastructure is done here. The next step in that series is where the
conflicts would be; that's the conversion of filesystems. It's purely
mechanical and it's better done after the merge, so if you could run
something like
list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$')
sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \
-e 's/\<MS_NOSUID\>/SB_NOSUID/g' \
-e 's/\<MS_NODEV\>/SB_NODEV/g' \
-e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \
-e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \
-e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \
-e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \
-e 's/\<MS_NOATIME\>/SB_NOATIME/g' \
-e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \
-e 's/\<MS_SILENT\>/SB_SILENT/g' \
-e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \
-e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \
-e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \
-e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \
$list
and commit it with something along the lines of 'convert filesystems
away from use of MS_... constants' as commit message, it would save a
quite a bit of headache next cycle"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
VFS: Differentiate mount flags (MS_*) from internal superblock flags
VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)
vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
Pull block layer updates from Jens Axboe:
"This is the first pull request for 4.14, containing most of the code
changes. It's a quiet series this round, which I think we needed after
the churn of the last few series. This contains:
- Fix for a registration race in loop, from Anton Volkov.
- Overflow complaint fix from Arnd for DAC960.
- Series of drbd changes from the usual suspects.
- Conversion of the stec/skd driver to blk-mq. From Bart.
- A few BFQ improvements/fixes from Paolo.
- CFQ improvement from Ritesh, allowing idling for group idle.
- A few fixes found by Dan's smatch, courtesy of Dan.
- A warning fixup for a race between changing the IO scheduler and
device remova. From David Jeffery.
- A few nbd fixes from Josef.
- Support for cgroup info in blktrace, from Shaohua.
- Also from Shaohua, new features in the null_blk driver to allow it
to actually hold data, among other things.
- Various corner cases and error handling fixes from Weiping Zhang.
- Improvements to the IO stats tracking for blk-mq from me. Can
drastically improve performance for fast devices and/or big
machines.
- Series from Christoph removing bi_bdev as being needed for IO
submission, in preparation for nvme multipathing code.
- Series from Bart, including various cleanups and fixes for switch
fall through case complaints"
* 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits)
kernfs: checking for IS_ERR() instead of NULL
drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set
drbd: Fix allyesconfig build, fix recent commit
drbd: switch from kmalloc() to kmalloc_array()
drbd: abort drbd_start_resync if there is no connection
drbd: move global variables to drbd namespace and make some static
drbd: rename "usermode_helper" to "drbd_usermode_helper"
drbd: fix race between handshake and admin disconnect/down
drbd: fix potential deadlock when trying to detach during handshake
drbd: A single dot should be put into a sequence.
drbd: fix rmmod cleanup, remove _all_ debugfs entries
drbd: Use setup_timer() instead of init_timer() to simplify the code.
drbd: fix potential get_ldev/put_ldev refcount imbalance during attach
drbd: new disk-option disable-write-same
drbd: Fix resource role for newly created resources in events2
drbd: mark symbols static where possible
drbd: Send P_NEG_ACK upon write error in protocol != C
drbd: add explicit plugging when submitting batches
drbd: change list_for_each_safe to while(list_first_entry_or_null)
drbd: introduce drbd_recv_header_maybe_unplug
...
-----BEGIN PGP SIGNATURE-----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=LLY3
-----END PGP SIGNATURE-----
Merge tag 'wberr-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull writeback error handling updates from Jeff Layton:
"This pile continues the work from last cycle on better tracking
writeback errors. In v4.13 we added some basic errseq_t infrastructure
and converted a few filesystems to use it.
This set continues refining that infrastructure, adds documentation,
and converts most of the other filesystems to use it. The main
exception at this point is the NFS client"
* tag 'wberr-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
ecryptfs: convert to file_write_and_wait in ->fsync
mm: remove optimizations based on i_size in mapping writeback waits
fs: convert a pile of fsync routines to errseq_t based reporting
gfs2: convert to errseq_t based writeback error reporting for fsync
fs: convert sync_file_range to use errseq_t based error-tracking
mm: add file_fdatawait_range and file_write_and_wait
fuse: convert to errseq_t based error tracking for fsync
mm: consolidate dax / non-dax checks for writeback
Documentation: add some docs for errseq_t
errseq: rename __errseq_set to errseq_set
because we held some back from the previous merge window until we
could get them perfected and well tested. We have a couple patch
sets, including my patch set for protecting glock gl_object and
Andreas Gruenbacher's patch set to fix the long-standing shrink-
slab hang, plus a bunch of assorted bugs and cleanups:
1. I fixed a bug whereby an IO error would lead to a double-brelse.
2. Andreas Gruenbacher made a minor cleanup to call his relatively
new function, gfs2_holder_initialized, rather than doing it
manually. This was just missed by a previous patch set.
3. Jan Kara fixed a bug whereby the SGID was being cleared when
inheriting ACLs.
4. Andreas found a bug and fixed it in his previous patch,
"Get rid of flush_delayed_work in gfs2_evict_inode". A call to
flush_delayed_work was deleted from *gfs2_inode_lookup and added
to gfs2_create_inode.
5. Wang Xibo found and fixed a list_add call in inode_go_lock
that specified the parameters in the wrong order.
6. Coly Li submitted a patch to add the REQ_PRIO to some of GFS2's
metadata reads that were accidentally missing them.
7 - 10. I submitted a 4-patch set to protect the glock gl_object
field. GFS2 was setting and checking gl_object with no locking
mechanism, so the value was occasionally stomped on, which caused
file system corruption.
11. I submitted a small cleanup to function gfs2_clear_rgrpd.
It was needlessly adding rgrp glocks to the lru list, then pulling
them back off immediately. The rgrp glocks don't use the lru list
anyway, so doing so was just a waste of time.
12. I submitted a patch that checks the GLOF_LRU flag on a glock
before trying to remove it from the lru_list. This avoids a lot
of unnecessary spin_lock contention.
13. I submitted a patch to delete GFS2's debugfs files only after
we evict all the glocks. Before this patch, GFS2 would delete the
debugfs files, and if unmount hung waiting for a glock, there was
no way to debug the problem. Now, if a hang occurs during umount,
we can examine the debugfs files to figure out why it's hung.
14. Andreas Gruenbacher submitted a patch to fix some trivial typos.
15 - 19. Andreas also submitted a five-part patch set to fix the
longstanding hang involving the slab shrinker: dlm requires
memory, calls the inode shrinker, which calls gfs2's evict, which
calls back into DLM before it can evict an inode.
20. Abhi Das submitted a patch to forcibly flush the active items
list to relieve memory pressure. This fixes a long-standing bug
whereby GFS2 was getting hung permanently in balance_dirty_pages.
21. Thomas Tai submitted a patch to fix a slab corruption problem
due to a residual pointer left in the lock_dlm lockstruct.
22. I submitted a patch to withdraw the file system if IO errors
are encountered while writing to the journals or statfs system
file which were previously not being sent back up. Before, some
IO errors were sometimes not be detected for several hours, and
at recovery time, the journal errors made journal replay
impossible.
23. Andreas has a patch to fix an annoying format-truncation compiler
warning so GFS2 compiles cleanly.
24. I have a patch that fixes a handful of sparse compiler warnings.
25. Andreas fixed up an useless gl_object warning caused by an
earlier patch.
26. Arvind Yadav added a patch to properly constify our rhashtable
params declare.
27. I added a patch to fix a regression caused by the non-recursive
delete and truncate patch that caused file system blocks to not
be properly freed.
28. Ernesto A. Fernández added a patch to fix a place where GFS2
would send back the wrong return code setting extended attributes.
29. Ernesto also added a patch to fix a case in which GFS2 was
improperly setting an inode's i_mode, potentially granting access
to the wrong users.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZrMC2AAoJENeLYdPf93o7PIQIAKY4hdC2pMM5tiiIHx5fPAAr
tjpVuFkDQzyEaTb9sArVLxEdva3ShKERQKoYq/VVxqbAEwPgXbzJFNNil1WTJi1t
J2gE4wE4G5x1+A7XDzCdPI8KAcF+yX63AaFYlVKyuZSq5w7njIRc1Vk+TFiIexxC
xb0nP0g9L6Zt114rE8kfi0/GLjTO9vOKM3XsJgG612I3/cs3RUx4gJ+nSUG0bYLA
qoBIXEJ3SFHw2Zr/LgHZ9QDHnlPVl3bjg03sRQaWZms7XbLegDBYsDSvS1HLZ300
gjTc0Dgz/6KwzDVJ7cZ/fPNYtIFY58tKs6aqqDTrCncsX9nPjcTAxYkBNWsFyZM=
=tXJ8
-----END PGP SIGNATURE-----
Merge tag 'gfs2-4.14.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Bob Peterson:
"We've got a whopping 29 GFS2 patches for this merge window, mainly
because we held some back from the previous merge window until we
could get them perfected and well tested. We have a couple patch sets,
including my patch set for protecting glock gl_object and Andreas
Gruenbacher's patch set to fix the long-standing shrink- slab hang,
plus a bunch of assorted bugs and cleanups.
Summary:
- I fixed a bug whereby an IO error would lead to a double-brelse.
- Andreas Gruenbacher made a minor cleanup to call his relatively new
function, gfs2_holder_initialized, rather than doing it manually.
This was just missed by a previous patch set.
- Jan Kara fixed a bug whereby the SGID was being cleared when
inheriting ACLs.
- Andreas found a bug and fixed it in his previous patch, "Get rid of
flush_delayed_work in gfs2_evict_inode". A call to
flush_delayed_work was deleted from *gfs2_inode_lookup and added to
gfs2_create_inode.
- Wang Xibo found and fixed a list_add call in inode_go_lock that
specified the parameters in the wrong order.
- Coly Li submitted a patch to add the REQ_PRIO to some of GFS2's
metadata reads that were accidentally missing them.
- I submitted a 4-patch set to protect the glock gl_object field.
GFS2 was setting and checking gl_object with no locking mechanism,
so the value was occasionally stomped on, which caused file system
corruption.
- I submitted a small cleanup to function gfs2_clear_rgrpd. It was
needlessly adding rgrp glocks to the lru list, then pulling them
back off immediately. The rgrp glocks don't use the lru list
anyway, so doing so was just a waste of time.
- I submitted a patch that checks the GLOF_LRU flag on a glock before
trying to remove it from the lru_list. This avoids a lot of
unnecessary spin_lock contention.
- I submitted a patch to delete GFS2's debugfs files only after we
evict all the glocks. Before this patch, GFS2 would delete the
debugfs files, and if unmount hung waiting for a glock, there was
no way to debug the problem. Now, if a hang occurs during umount,
we can examine the debugfs files to figure out why it's hung.
- Andreas Gruenbacher submitted a patch to fix some trivial typos.
- Andreas also submitted a five-part patch set to fix the
longstanding hang involving the slab shrinker: dlm requires memory,
calls the inode shrinker, which calls gfs2's evict, which calls
back into DLM before it can evict an inode.
- Abhi Das submitted a patch to forcibly flush the active items list
to relieve memory pressure. This fixes a long-standing bug whereby
GFS2 was getting hung permanently in balance_dirty_pages.
- Thomas Tai submitted a patch to fix a slab corruption problem due
to a residual pointer left in the lock_dlm lockstruct.
- I submitted a patch to withdraw the file system if IO errors are
encountered while writing to the journals or statfs system file
which were previously not being sent back up. Before, some IO
errors were sometimes not be detected for several hours, and at
recovery time, the journal errors made journal replay impossible.
- Andreas has a patch to fix an annoying format-truncation compiler
warning so GFS2 compiles cleanly.
- I have a patch that fixes a handful of sparse compiler warnings.
- Andreas fixed up an useless gl_object warning caused by an earlier
patch.
- Arvind Yadav added a patch to properly constify our rhashtable
params declare.
- I added a patch to fix a regression caused by the non-recursive
delete and truncate patch that caused file system blocks to not be
properly freed.
- Ernesto A. Fernández added a patch to fix a place where GFS2 would
send back the wrong return code setting extended attributes.
- Ernesto also added a patch to fix a case in which GFS2 was
improperly setting an inode's i_mode, potentially granting access
to the wrong users"
* tag 'gfs2-4.14.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (29 commits)
gfs2: preserve i_mode if __gfs2_set_acl() fails
gfs2: don't return ENODATA in __gfs2_xattr_set unless replacing
GFS2: Fix non-recursive truncate bug
gfs2: constify rhashtable_params
GFS2: Fix gl_object warnings
GFS2: Fix up some sparse warnings
gfs2: Silence gcc format-truncation warning
GFS2: Withdraw for IO errors writing to the journal or statfs
gfs2: fix slab corruption during mounting and umounting gfs file system
gfs2: forcibly flush ail to relieve memory pressure
gfs2: Clean up waiting on glocks
gfs2: Defer deleting inodes under memory pressure
gfs2: gfs2_evict_inode: Put glocks asynchronously
gfs2: Get rid of gfs2_set_nlink
gfs2: gfs2_glock_get: Wait on freeing glocks
gfs2: Fix trivial typos
GFS2: Delete debugfs files only after we evict the glocks
GFS2: Don't waste time locking lru_lock for non-lru glocks
GFS2: Don't bother trying to add rgrps to the lru list
GFS2: Clear gl_object when deleting an inode in gfs2_delete_inode
...
When changing a file's acl mask, __gfs2_set_acl() will first set the
group bits of i_mode to the value of the mask, and only then set the
actual extended attribute representing the new acl.
If the second part fails (due to lack of space, for example) and the
file had no acl attribute to begin with, the system will from now on
assume that the mask permission bits are actual group permission bits,
potentially granting access to the wrong users.
Prevent this by only changing the inode mode after the acl has been set.
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
The function __gfs2_xattr_set() will return -ENODATA when called to
remove a xattr that does not exist. The result is that setfacl will
show an exit status of 1 when called to set only a file's mode bits
(on a file with no ACLs), despite succeeding. A "No data available"
error will be printed as well.
To fix this return 0 instead, except when the XATTR_REPLACE flag is
set, in which case -ENODATA is appropriate. This is consistent with
how most other xattr setting functions work, in other filesystems.
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch if you truncated a file to a smaller size it
wasn't freeing all the blocks properly. There are two reasons.
First, the metapath comparison was not comparing previous heights.
I added a function, mp_eq_to_hgt, which checks the metapath at
all heights prior to the target height.
Second, in function find_nonnull_ptr, it needed to zero out all
pointers for heights following the target height. Translated into
decimal integer terms, this way a number like 299, when incremented,
becomes 300, not 399. The 2 gets incremented to 3, and the following
digits need to be reset.
These two things allow the truncate state machine to properly find
the blocks it needs to delete.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
rhashtable_params are not supposed to change at runtime. All
Functions rhashtable_* working with const rhashtable_params
provided by <linux/rhashtable.h>. So mark the non-const structs
as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
The following cleanup is needed to avoid spilling the syslog with
false warnings.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This patch cleans up various pieces of GFS2 to avoid sparse errors.
This doesn't fix them all, but it fixes several. The first error,
in function glock_hash_walk was a genuine bug where the rhashtable
could be started and not stopped.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Enlarge sd_fsname to be big enough for the longest long lock table name
and an arbitrary journal number. This silences two -Wformat-truncation
warnings with gcc 7.1.1.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, if GFS2 encountered IO errors while writing to
the journal, it would not report the problem, so they would go
unnoticed, sometimes for many hours. Sometimes this would only be
noticed later, when recovery tried to do journal replay and failed
due to invalid metadata at the blocks that resulted in IO errors.
This patch makes GFS2's log daemon check for IO errors. If it
encounters one, it withdraws from the file system and reports
why in dmesg. A similar action is taken when IO errors occur when
writing to the system statfs file.
These errors are also reported back to any callers of fsync, since
that requires the journal to be flushed. Therefore, any IO errors
that would previously go unnoticed are now noticed and the file
system is withdrawn as early as possible, thus preventing further
file system damage.
Also note that this reintroduces superblock variable sd_log_error,
which Christoph removed with commit f729b66fca.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This way we don't need a block_device structure to submit I/O. The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open. Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).
For the actual I/O path all that we need is the gendisk, which exists
once per block device. But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.
Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When using cman-3.0.12.1 and gfs2-utils-3.0.12.1, mounting and
unmounting GFS2 file system would cause kernel to hang. The slab
allocator suggests that it is likely a double free memory corruption.
The issue is traced back to v3.9-rc6 where a patch is submitted to
use kzalloc() for storing a bitmap instead of using a local variable.
The intention is to allocate memory during mount and to free memory
during unmount. The original patch misses a code path which has
already freed the memory and caused memory corruption. This patch sets
the memory pointer to NULL after the memory is freed, so that double
free memory corruption will not happen.
gdlm_mount()
'-- set_recover_size() which use kzalloc()
'-- if dlm does not support ops callbacks then
'--- free_recover_size() which use kfree()
gldm_unmount()
'-- free_recover_size() which use kfree()
Previous patch which introduced the double free issue is
commit 57c7310b8e ("GFS2: use kmalloc for lvb bitmap")
Signed-off-by: Thomas Tai <thomas.tai@oracle.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
On systems with low memory, it is possible for gfs2 to infinitely
loop in balance_dirty_pages() under heavy IO (creating sparse files).
balance_dirty_pages() attempts to write out the dirty pages via
gfs2_writepages() but none are found because these dirty pages are
being used by the journaling code in the ail. Normally, the journal
has an upper threshold which when hit triggers an automatic flush
of the ail. But this threshold can be higher than the number of
allowable dirty pages and result in the ail never being flushed.
This patch forces an ail flush when gfs2_writepages() fails to write
anything. This is a good indication that the ail might be holding
some dirty pages.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
The prepare_to_wait_on_glock and finish_wait_on_glock functions introduced in
commit 56a365be "gfs2: gfs2_glock_get: Wait on freeing glocks" are
better removed, resulting in cleaner code.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
When under memory pressure and an inode's link count has dropped to
zero, defer deleting the inode to the delete workqueue. This avoids
calling into DLM under memory pressure, which can deadlock.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
gfs2_evict_inode is called to free inodes under memory pressure. The
function calls into DLM when an inode's last cluster-wide reference goes
away (remote unlink) and to release the glock and associated DLM lock
before finally destroying the inode. However, if DLM is blocked on
memory to become available, calling into DLM again will deadlock.
Avoid that by decoupling releasing glocks from destroying inodes in that
case: with gfs2_glock_queue_put, glocks will be dequeued asynchronously
in work queue context, when the associated inodes have likely already
been destroyed.
With this change, inodes can end up being unlinked, remote-unlink can be
triggered, and then the inode can be reallocated before all
remote-unlink callbacks are processed. To detect that, revalidate the
link count in gfs2_evict_inode to make sure we're not deleting an
allocated, referenced inode.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Remove gfs2_set_nlink which prevents the link count of an inode from
becoming non-zero once it has reached zero. The next commit reduces the
amount of waiting on glocks when an inode is evicted from memory. With
that, an inode can become reallocated before all the remote-unlink
callbacks from a previous delete are processed, which causes the link
count to change from zero to non-zero.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Keep glocks in their hash table until they are freed instead of removing
them when their last reference is dropped. This allows to wait for any
previous instances of a glock to go away in gfs2_glock_get before
creating a new glocks.
Special thanks to Andy Price for finding and fixing a problem which also
required us to delete the rcu_read_unlock from the error case in function
gfs2_glock_get.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This patch moves the call to gfs2_delete_debugfs_file so that it
comes after the glock hash table has been cleared. This way we
can query the debugfs files if umount hangs.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, glock_dq would call gfs2_glock_remove_from_lru.
For glocks that are never put on the LRU, such as the transaction
glock, this just takes the spin_lock, determines there's nothing to
be done because the list is empty, then unlocks again. This was
causing unnecessary lock contention on the lru_lock spin_lock.
This patch adds a check for GLOF_LRU in the glops before taking
the spin_lock.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This patch removes a call to gfs2_glock_add_to_lru from function
gfs2_clear_rgrpd. The call is just a waste of time because as soon
as it adds it to the lru_list, the call to gfs2_glock_put takes it
back off again.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This patch adds some calls to clear gl_object in function
gfs2_delete_inode. Since we are deleting the inode, and the glock
typically outlives the inode in core, we must clear gl_object
so subsequent use of the glock (e.g. for a new inode in its place)
will not have the old pointer sitting there. In error cases we
need to tidy up after ourselves. In non-error cases, we need to
clear gl_object before we set the block free in the bitmap so
residules aren't left for potential inode creators.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
If function gfs2_create_inode fails after the inode has been
created (for example, if the inode_refresh fails for some reason)
the function was setting gl_object but never clearing it again.
The glocks are left pointing to a freed inode. This patch adds
the calls to clear gl_object in the appropriate error paths.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, the inode glock's gl_object was set after a
reference was acquired, but before the block type was verified.
In cases where the block was unlinked, then freed and reused on
another node, a residule delete callback (delete_work) would try
to look up the inode, eventually failing the block check, but
only after it overwrites gl_object with a pointer to the wrong
inode. This patch moves the assignment of gl_object after the
block check so it won't be improperly overwritten.
Likewise, at the end of the function, gfs2_inode_lookup was
clearing gl_object after it unlocked the glock, which meant
another process might free the glock in the meantime. This
patch guards against that case.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch introduces a new helper function in glock.h that
clears gl_object, with an added integrity check. An additional
integrity check has been added to glock_set_object, plus comments.
This is step 1 in a series to ensure gl_object integrity.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
When gfs2 does metadata I/O, only REQ_META is used as a metadata hint of
the bio. But flag REQ_META is just a hint for block trace, not for block
layer code to handle a bio as metadata request.
For some of metadata I/Os of gfs2, A REQ_PRIO flag on the metadata bio
would be very informative to block layer code. For example, if bcache is
used as a I/O cache for gfs2, it will be possible for bcache code to get
the hint and cache the pre-fetched metadata blocks on cache device. This
behavior may be helpful to improve metadata I/O performance if the
following requests hit the cache.
Here are the locations in gfs2 code where a REQ_PRIO flag should be added,
- All places where REQ_READAHEAD is used, gfs2 code uses this flag for
metadata read ahead.
- In gfs2_meta_rq() where the first metadata block is read in.
- In gfs2_write_buf_to_page(), read in quota metadata blocks to have them
up to date.
These metadata blocks are probably to be accessed again in future, adding
a REQ_PRIO flag may have bcache to keep such metadata in fast cache
device. For system without a cache layer, REQ_PRIO can still provide hint
to block layer to handle metadata requests more properly.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
In inode_go_lock() function, the parameter order of list_add() is error.
According to the define of list_add(), the first parameter is new entry
and the second is the list head, so ip->i_trunc_list should be the
first parameter and the sdp->sd_trunc_list should be second.
Signed-off-by: Wang Xibo<wang.xibo@zte.com.cn>
Signed-off-by: Xiao Likun<xiao.likun@zte.com.cn>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
When commit 4fd1a57952 moved the call to flush_delayed_work from
gfs2_evict_inode to gfs2_inode_lookup to avoid calling into DLM during
evict, a similar call should have been added to gfs2_create_inode:
that's another code path in which glocks of previous inodes may be
reused.
The flush of the iopen glock work queue added by 4fd1a57952, on the
other hand, is unnecessary and can be removed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit
set, DIR1 is expected to have SGID bit set (and owning group equal to
the owning group of 'DIR0'). However when 'DIR0' also has some default
ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on
'DIR1' to get cleared if user is not member of the owning group.
Fix the problem by moving posix_acl_update_mode() out of
__gfs2_set_acl() into gfs2_set_acl(). That way the function will not be
called when inheriting ACLs which is what we want as it prevents SGID
bit clearing and the mode has been properly set by posix_acl_create()
anyway.
Fixes: 073931017b
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Function gfs2_holder_initialized should be used in do_flock as well.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, problems reading in indirect buffers would send
an IO error back to the caller, and release the buffer_head with
brelse() in function gfs2_meta_indirect_buffer, however, it would
still return the address of the buffer_head it released. After the
error was discovered, function gfs2_block_map would call function
release_metapath to free all buffers. That checked:
if (mp->mp_bh[i] == NULL) but since the value was set after the
error, it was non-zero, so brelse was called a second time. This
resulted in the following error:
kernel: WARNING: at fs/buffer.c:1224 __brelse+0x3a/0x40() (Tainted: G W -- ------------ )
kernel: Hardware name: RHEV Hypervisor
kernel: VFS: brelse: Trying to free free buffer
This patch changes gfs2_meta_indirect_buffer so it only sets
the buffer_head pointer in cases where it isn't released.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Firstly by applying the following with coccinelle's spatch:
@@ expression SB; @@
-SB->s_flags & MS_RDONLY
+sb_rdonly(SB)
to effect the conversion to sb_rdonly(sb), then by applying:
@@ expression A, SB; @@
(
-(!sb_rdonly(SB)) && A
+!sb_rdonly(SB) && A
|
-A != (sb_rdonly(SB))
+A != sb_rdonly(SB)
|
-A == (sb_rdonly(SB))
+A == sb_rdonly(SB)
|
-!(sb_rdonly(SB))
+!sb_rdonly(SB)
|
-A && (sb_rdonly(SB))
+A && sb_rdonly(SB)
|
-A || (sb_rdonly(SB))
+A || sb_rdonly(SB)
|
-(sb_rdonly(SB)) != A
+sb_rdonly(SB) != A
|
-(sb_rdonly(SB)) == A
+sb_rdonly(SB) == A
|
-(sb_rdonly(SB)) && A
+sb_rdonly(SB) && A
|
-(sb_rdonly(SB)) || A
+sb_rdonly(SB) || A
)
@@ expression A, B, SB; @@
(
-(sb_rdonly(SB)) ? 1 : 0
+sb_rdonly(SB)
|
-(sb_rdonly(SB)) ? A : B
+sb_rdonly(SB) ? A : B
)
to remove left over excess bracketage and finally by applying:
@@ expression A, SB; @@
(
-(A & MS_RDONLY) != sb_rdonly(SB)
+(bool)(A & MS_RDONLY) != sb_rdonly(SB)
|
-(A & MS_RDONLY) == sb_rdonly(SB)
+(bool)(A & MS_RDONLY) == sb_rdonly(SB)
)
to make comparisons against the result of sb_rdonly() (which is a bool)
work correctly.
Signed-off-by: David Howells <dhowells@redhat.com>
Pull ->s_options removal from Al Viro:
"Preparations for fsmount/fsopen stuff (coming next cycle). Everything
gets moved to explicit ->show_options(), killing ->s_options off +
some cosmetic bits around fs/namespace.c and friends. Basically, the
stuff needed to work with fsmount series with minimum of conflicts
with other work.
It's not strictly required for this merge window, but it would reduce
the PITA during the coming cycle, so it would be nice to have those
bits and pieces out of the way"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
isofs: Fix isofs_show_options()
VFS: Kill off s_options and helpers
orangefs: Implement show_options
9p: Implement show_options
isofs: Implement show_options
afs: Implement show_options
affs: Implement show_options
befs: Implement show_options
spufs: Implement show_options
bpf: Implement show_options
ramfs: Implement show_options
pstore: Implement show_options
omfs: Implement show_options
hugetlbfs: Implement show_options
VFS: Don't use save/replace_mount_options if not using generic_show_options
VFS: Provide empty name qstr
VFS: Make get_filesystem() return the affected filesystem
VFS: Clean up whitespace in fs/namespace.c and fs/super.c
Provide a function to create a NUL-terminated string from unterminated data
-----BEGIN PGP SIGNATURE-----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=3Z93
-----END PGP SIGNATURE-----
Merge tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull Writeback error handling updates from Jeff Layton:
"This pile represents the bulk of the writeback error handling fixes
that I have for this cycle. Some of the earlier patches in this pile
may look trivial but they are prerequisites for later patches in the
series.
The aim of this set is to improve how we track and report writeback
errors to userland. Most applications that care about data integrity
will periodically call fsync/fdatasync/msync to ensure that their
writes have made it to the backing store.
For a very long time, we have tracked writeback errors using two flags
in the address_space: AS_EIO and AS_ENOSPC. Those flags are set when a
writeback error occurs (via mapping_set_error) and are cleared as a
side-effect of filemap_check_errors (as you noted yesterday). This
model really sucks for userland.
Only the first task to call fsync (or msync or fdatasync) will see the
error. Any subsequent task calling fsync on a file will get back 0
(unless another writeback error occurs in the interim). If I have
several tasks writing to a file and calling fsync to ensure that their
writes got stored, then I need to have them coordinate with one
another. That's difficult enough, but in a world of containerized
setups that coordination may even not be possible.
But wait...it gets worse!
The calls to filemap_check_errors can be buried pretty far down in the
call stack, and there are internal callers of filemap_write_and_wait
and the like that also end up clearing those errors. Many of those
callers ignore the error return from that function or return it to
userland at nonsensical times (e.g. truncate() or stat()). If I get
back -EIO on a truncate, there is no reason to think that it was
because some previous writeback failed, and a subsequent fsync() will
(incorrectly) return 0.
This pile aims to do three things:
1) ensure that when a writeback error occurs that that error will be
reported to userland on a subsequent fsync/fdatasync/msync call,
regardless of what internal callers are doing
2) report writeback errors on all file descriptions that were open at
the time that the error occurred. This is a user-visible change,
but I think most applications are written to assume this behavior
anyway. Those that aren't are unlikely to be hurt by it.
3) document what filesystems should do when there is a writeback
error. Today, there is very little consistency between them, and a
lot of cargo-cult copying. We need to make it very clear what
filesystems should do in this situation.
To achieve this, the set adds a new data type (errseq_t) and then
builds new writeback error tracking infrastructure around that. Once
all of that is in place, we change the filesystems to use the new
infrastructure for reporting wb errors to userland.
Note that this is just the initial foray into cleaning up this mess.
There is a lot of work remaining here:
1) convert the rest of the filesystems in a similar fashion. Once the
initial set is in, then I think most other fs' will be fairly
simple to convert. Hopefully most of those can in via individual
filesystem trees.
2) convert internal waiters on writeback to use errseq_t for
detecting errors instead of relying on the AS_* flags. I have some
draft patches for this for ext4, but they are not quite ready for
prime time yet.
This was a discussion topic this year at LSF/MM too. If you're
interested in the gory details, LWN has some good articles about this:
https://lwn.net/Articles/718734/https://lwn.net/Articles/724307/"
* tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
btrfs: minimal conversion to errseq_t writeback error reporting on fsync
xfs: minimal conversion to errseq_t writeback error reporting
ext4: use errseq_t based error handling for reporting data writeback errors
fs: convert __generic_file_fsync to use errseq_t based reporting
block: convert to errseq_t based writeback error tracking
dax: set errors in mapping when writeback fails
Documentation: flesh out the section in vfs.txt on storing and reporting writeback errors
mm: set both AS_EIO/AS_ENOSPC and errseq_t in mapping_set_error
fs: new infrastructure for writeback error handling and reporting
lib: add errseq_t type and infrastructure for handling it
mm: don't TestClearPageError in __filemap_fdatawait_range
mm: clear AS_EIO/AS_ENOSPC when writeback initiation fails
jbd2: don't clear and reset errors after waiting on writeback
buffer: set errors in mapping at the time that the error occurs
fs: check for writeback errors after syncing out buffers in generic_file_fsync
buffer: use mapping_set_error instead of setting the flag
mm: fix mapping_set_error call in me_pagecache_dirty
Before commit 88ffbf3e03 "GFS2: Use resizable hash table for glocks",
glocks were freed via call_rcu to allow reading the glock hashtable
locklessly using rcu. This was then changed to free glocks immediately,
which made reading the glock hashtable unsafe. Bring back the original
code for freeing glocks via call_rcu.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Cc: stable@vger.kernel.org # 4.3+
I noticed on xfs that I could still sometimes get back an error on fsync
on a fd that was opened after the error condition had been cleared.
The problem is that the buffer code sets the write_io_error flag and
then later checks that flag to set the error in the mapping. That flag
perisists for quite a while however. If the file is later opened with
O_TRUNC, the buffers will then be invalidated and the mapping's error
set such that a subsequent fsync will return error. I think this is
incorrect, as there was no writeback between the open and fsync.
Add a new mark_buffer_write_io_error operation that sets the flag and
the error in the mapping at the same time. Replace all calls to
set_buffer_write_io_error with mark_buffer_write_io_error, and remove
the places that check this flag in order to set the error in the
mapping.
This sets the error in the mapping earlier, at the time that it's first
detected.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Provide an empty name (ie. "") qstr for general use.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
1. Andreas Gruenbacher has four patches related to cleaning up the GFS2
inode evict process. This is about half of his patches designed to
fix a long-standing GFS2 hang related to the inode shrinker.
(Shrinker calls gfs2 evict, evict calls DLM, DLM requires memory
and blocks on the shrinker.) These 4 patches have been well tested.
His second set of patches are still being tested, so I plan to hold
them until the next merge window, after we have more weeks of testing.
The first patch eliminates the flush_delayed_work, which can block.
2. Andreas's second patch protects setting of gl_object for rgrps with
a spin_lock to prevent proven races.
3. His third patch introduces a centralized mechanism for queueing glock
work with better reference counting, to prevent more races.
4. His fourth patch retains a reference to inode glocks when an error
occurs while creating an inode. This keeps the subsequent evict from
needing to reacquire the glock, which might call into DLM and block
in low memory conditions.
5. Arvind Yadav has a patch to add const to attribute_group structures.
6. I have a patch to detect directory entry inconsistencies and withdraw
the file system if any are found. Better that than silent corruption.
7. I have a patch to remove a vestigial variable from glock structures,
saving some slab space.
8. I have another patch to remove a vestigial variable from the GFS2
in-core superblock structure.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZXOIfAAoJENeLYdPf93o7RVcH/jLEK3hmZOd94pDTYg3Damuo
KI3xjyutDgQT83uwg8p5UBPwRYCDnyiOLwOWGBJJvjPEI1S4syrXq/FzOmxmX6cV
nE28ARL/OXCoFEXBMUVHvHL3nK+zEUr8rO6Xz51B1ifVq7GV8iVK+ZgxzRhx0PWP
f+0SVHiQtU0HKyxR5y9p43oygtHZaGbjy4WL0YbmFZM59y5q9A8rBHFACn2JyPBm
/zXN6gF/Orao+BDXLT6OM3vNXZcOQ7FUPWwctguHsAO/bLzWiISyfJxLWJsHvSdW
tzFTN1DByjXvqAhs4HTSuh9JfBDAyxcXkmczXJyATBkCTEJv42Iev+ILmre+wwQ=
=YTwn
-----END PGP SIGNATURE-----
Merge tag 'gfs2-4.13.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Bob Peterson:
"We've got eight GFS2 patches for this merge window:
- Andreas Gruenbacher has four patches related to cleaning up the
GFS2 inode evict process. This is about half of his patches
designed to fix a long-standing GFS2 hang related to the inode
shrinker: Shrinker calls gfs2 evict, evict calls DLM, DLM requires
memory and blocks on the shrinker.
These four patches have been well tested. His second set of patches
are still being tested, so I plan to hold them until the next merge
window, after we have more weeks of testing. The first patch
eliminates the flush_delayed_work, which can block.
- Andreas's second patch protects setting of gl_object for rgrps with
a spin_lock to prevent proven races.
- His third patch introduces a centralized mechanism for queueing
glock work with better reference counting, to prevent more races.
-His fourth patch retains a reference to inode glocks when an error
occurs while creating an inode. This keeps the subsequent evict
from needing to reacquire the glock, which might call into DLM and
block in low memory conditions.
- Arvind Yadav has a patch to add const to attribute_group
structures.
- I have a patch to detect directory entry inconsistencies and
withdraw the file system if any are found. Better that than silent
corruption.
- I have a patch to remove a vestigial variable from glock
structures, saving some slab space.
- I have another patch to remove a vestigial variable from the GFS2
in-core superblock structure"
* tag 'gfs2-4.13.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
GFS2: constify attribute_group structures.
gfs2: gfs2_create_inode: Keep glock across iput
gfs2: Clean up glock work enqueuing
gfs2: Protect gl->gl_object by spin lock
gfs2: Get rid of flush_delayed_work in gfs2_evict_inode
GFS2: Eliminate vestigial sd_log_flush_wrapped
GFS2: Remove gl_list from glock structure
GFS2: Withdraw when directory entry inconsistencies are detected
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
5259 1344 8 6611 19d3 fs/gfs2/sys.o
File size After adding 'const':
text data bss dec hex filename
5371 1216 8 6595 19c3 fs/gfs2/sys.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
On failure, keep the inode glock across the final iput of the new inode
so that gfs2_evict_inode doesn't have to re-acquire the glock. That
way, gfs2_evict_inode won't need to revalidate the block type.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This patch adds a standardized queueing mechanism for glock work
with spin_lock protection to prevent races.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Put all remaining accesses to gl->gl_object under the
gl->gl_lockref.lock spinlock to prevent races.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
So far, gfs2_evict_inode clears gl->gl_object and then flushes the glock
work queue to make sure that inode glops which dereference gl->gl_object
have finished running before the inode is destroyed. However, flushing
the work queue may do more work than needed, and in particular, it may
call into DLM, which we want to avoid here. Use a bit lock
(GIF_GLOP_PENDING) to synchronize between the inode glops and
gfs2_evict_inode instead to get rid of the flushing.
In addition, flush the work queues of existing glocks before reusing
them for new inodes to get those glocks into a known state: the glock
state engine currently doesn't handle glock re-appropriation correctly.
(We may be able to fix the glock state engine instead later.)
Based on a patch by Steven Whitehouse <swhiteho@redhat.com>.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This patch prints an inode consistency error and withdraws the file
system when directory entry counts are mismatched.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZPdbLAAoJEHm+PkMAQRiGx4wH/1nCjfnl6fE8oJ24/1gEAOUh
biFdqJkYZmlLYHVtYfLm4Ueg4adJdg0wx6qM/4RaAzmQVvLfDV34bc1qBf1+P95G
kVF+osWyXrZo5cTwkwapHW/KNu4VJwAx2D1wrlxKDVG5AOrULH1pYOYGOpApEkZU
4N+q5+M0ce0GJpqtUZX+UnI33ygjdDbBxXoFKsr24B7eA0ouGbAJ7dC88WcaETL+
2/7tT01SvDMo0jBSV0WIqlgXwZ5gp3yPGnklC3F4159Yze6VFrzHMKS/UpPF8o8E
W9EbuzwxsKyXUifX2GY348L1f+47glen/1sedbuKnFhP6E9aqUQQJXvEO7ueQl4=
=m2Gx
-----END PGP SIGNATURE-----
Merge tag 'v4.12-rc5' into for-4.13/block
We've already got a few conflicts and upcoming work depends on some of the
changes that have gone into mainline as regression fixes for this series.
Pull in 4.12-rc5 to resolve these conflicts and make it easier on down stream
trees to continue working on 4.13 changes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace bi_error with a new bi_status to allow for a clear conversion.
Note that device mapper overloaded bi_error with a private value, which
we'll have to keep arround at least for now and thus propagate to a
proper blk_status_t value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
For some file systems we still memcpy into it, but in various places this
already allows us to use the proper uuid helpers. More to come..
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com> (Changes to IMA/EVM)
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Commit b685d3d65a "block: treat REQ_FUA and REQ_PREFLUSH as
synchronous" removed REQ_SYNC flag from WRITE_{FUA|PREFLUSH|...}
definitions. generic_make_request_checks() however strips REQ_FUA and
REQ_PREFLUSH flags from a bio when the storage doesn't report volatile
write cache and thus write effectively becomes asynchronous which can
lead to performance regressions
Fix the problem by making sure all bios which are synchronous are
properly marked with REQ_SYNC.
Fixes: b685d3d65a
CC: Steven Whitehouse <swhiteho@redhat.com>
CC: cluster-devel@redhat.com
CC: stable@vger.kernel.org
Acked-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
1. Andreas Gruenbacher wrote a patch to replace the deprecated
call to rhashtable_walk_init with rhashtable_walk_enter.
2. Andreas also wrote a patch to eliminate redundant code in
two of our debugfs sequence files.
3. Andreas also cleaned up the rhashtable key ugliness Linus
pointed out during this cycle, following Linus's suggestions.
4. Andreas also wrote a patch to take advantage of his new
function rhashtable_lookup_get_insert_fast. This makes glock
lookup faster and more bullet-proof.
5. Andreas also wrote a patch to revert a patch in the evict
path that caused occasional deadlocks, and is no longer
needed.
6. Andrew Price wrote a patch to re-enable fallocate for the
rindex system file to enable gfs2_grow to grow properly on
secondary file system grow operations.
7. I wrote a patch to initialize an inode number field to make
certain kernel trace points more understandable.
8. I also wrote a patch that makes GFS2 file system "withdraw"
work more like it should by ignoring operations after a
withdraw that would formerly cause a BUG() and kernel panic.
9. I also reworked the entire truncate/delete algorithm,
scrapping the old recursive algorithm in favor of a new
non-recursive algorithm. This was done for performance:
This way, GFS2 no longer needs to lock multiple resource
groups while doing truncates and deletes of files that cross
multiple resource group boundaries, allowing for better
parallelism. It also solves a problem whereby deleting large
files would request a large chunk of kernel memory, which
resulted in a get_page_from_freelist warning.
10. Due to a regression found during testing, I added a new
patch to correct "GFS2: Prevent BUG from occurring when
normal Withdraws occur".
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZDNnaAAoJENeLYdPf93o7B7kIAJzwz7vVDVg2TpWVhMmXIWhf
rZx3Gth5F0h+ZHddW7HzTLg+64XQ5//GyDD3UDtCpkhl5SJH+nt3juHyPJlRwioT
0ua4SjyKLQSoJJVAEgAwu42QjORTXab7NjYn5LEhvRc0Gg/El9WGU+ZgmP2/aAvf
KE2u/IEYNDkoJNS3Oqc7shajAyLYda6wCAASs/1ZGt9u48m/o/I23Zd7wr7EOkzw
rd3gB0x80cJqDAB5IcymGOm111Tg4g34LwsRuyMnWE3H1jOgV+J515FVHEIvZuPq
Wl9X7V8CzktI7nyLKVnZhpuv5JzyMq/vOPiD01tTFx8Oy1JCRezjmATXFjW/zIo=
=MX3c
-----END PGP SIGNATURE-----
Merge tag 'gfs2-4.12.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Bob Peterson:
"We've got ten GFS2 patches for this merge window.
- Andreas Gruenbacher wrote a patch to replace the deprecated call to
rhashtable_walk_init with rhashtable_walk_enter.
- Andreas also wrote a patch to eliminate redundant code in two of
our debugfs sequence files.
- Andreas also cleaned up the rhashtable key ugliness Linus pointed
out during this cycle, following Linus's suggestions.
- Andreas also wrote a patch to take advantage of his new function
rhashtable_lookup_get_insert_fast. This makes glock lookup faster
and more bullet-proof.
- Andreas also wrote a patch to revert a patch in the evict path that
caused occasional deadlocks, and is no longer needed.
- Andrew Price wrote a patch to re-enable fallocate for the rindex
system file to enable gfs2_grow to grow properly on secondary file
system grow operations.
- I wrote a patch to initialize an inode number field to make certain
kernel trace points more understandable.
- I also wrote a patch that makes GFS2 file system "withdraw" work
more like it should by ignoring operations after a withdraw that
would formerly cause a BUG() and kernel panic.
- I also reworked the entire truncate/delete algorithm, scrapping the
old recursive algorithm in favor of a new non-recursive algorithm.
This was done for performance: This way, GFS2 no longer needs to
lock multiple resource groups while doing truncates and deletes of
files that cross multiple resource group boundaries, allowing for
better parallelism. It also solves a problem whereby deleting large
files would request a large chunk of kernel memory, which resulted
in a get_page_from_freelist warning.
- Due to a regression found during testing, I added a new patch to
correct 'GFS2: Prevent BUG from occurring when normal Withdraws
occur'."
* tag 'gfs2-4.12.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
GFS2: Allow glocks to be unlocked after withdraw
GFS2: Non-recursive delete
gfs2: Re-enable fallocate for the rindex
Revert "GFS2: Wait for iopen glock dequeues"
gfs2: Switch to rhashtable_lookup_get_insert_fast
GFS2: Temporarily zero i_no_addr when creating a dinode
gfs2: Don't pack struct lm_lockname
gfs2: Deduplicate gfs2_{glocks,glstats}_open
gfs2: Replace rhashtable_walk_init with rhashtable_walk_enter
GFS2: Prevent BUG from occurring when normal Withdraws occur
This bug fixes a regression introduced by patch 0d1c7ae9d8.
The intent of the patch was to stop promoting glocks after a
file system is withdrawn due to a variety of errors, because doing
so results in a BUG(). (You should be able to unmount after a
withdraw rather than having the kernel panic.)
Unfortunately, it also stopped demotions, so glocks could not be
unlocked after withdraw, which means the unmount would hang.
This patch allows function do_xmote to demote locks to an
unlocked state after a withdraw, but not promote them.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Now that all bdi structures filesystems use are properly refcounted, we
can remove the SB_I_DYNBDI flag.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Similarly to set_bdev_super() GFS2 just used block device reference to
bdi. Convert it to properly getting bdi reference. The reference will
get automatically dropped on superblock destruction.
CC: Steven Whitehouse <swhiteho@redhat.com>
CC: Bob Peterson <rpeterso@redhat.com>
CC: cluster-devel@redhat.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Implement truncate/delete as a non-recursive algorithm. The older
algorithm was implemented with recursion to strip off each layer
at a time (going by height, starting with the maximum height.
This version tries to do the same thing but without recursion,
and without needing to allocate new structures or lists in memory.
For example, say you want to truncate a very large file to 1 byte,
and its end-of-file metapath is: 0.505.463.428. The starting
metapath would be 0.0.0.0. Since it's a truncate to non-zero, it
needs to preserve that byte, and all metadata pointing to it.
So it would start at 0.0.0.0, look up all its metadata buffers,
then free all data blocks pointed to at the highest level.
After that buffer is "swept", it moves on to 0.0.0.1, then
0.0.0.2, etc., reading in buffers and sweeping them clean.
When it gets to the end of the 0.0.0 metadata buffer (for 4K
blocks the last valid one is 0.0.0.508), it backs up to the
previous height and starts working on 0.0.1.0, then 0.0.1.1,
and so forth. After it reaches the end and sweeps 0.0.1.508,
it continues with 0.0.2.0, and so on. When that height is
exhausted, and it reaches 0.0.508.508 it backs up another level,
to 0.1.0.0, then 0.1.0.1, through 0.1.0.508. So it has to keep
marching backwards and forwards through the metadata until it's
all swept clean. Once it has all the data blocks freed, it
lowers the strip height, and begins the process all over again,
but with one less height. This time it sweeps 0.0.0 through
0.505.463. When that's clean, it lowers the strip height again
and works to free 0.505. Eventually it strips the lowest height, 0.
For a delete or truncate to 0, all metadata for all heights of
0.0.0.0 would be freed. For a truncate to 1 byte, 0.0.0.0 would
be preserved.
This isn't much different from normal integer incrementing,
where an integer gets incremented from 0000 (0.0.0.0) to 3021
(3.0.2.1). So 0000 gets increments to 0001, 0002, up to 0009,
then on to 0010, 0011 up to 0099, then 0100 and so forth. It's
just that each "digit" goes from 0 to 508 (for a total of 509
pointers) rather than from 0 to 9.
Note that the dinode will only have 483 pointers due to the
dinode structure itself.
Also note: this is just an example. These numbers (509 and 483)
are based on a standard 4K block size. Smaller block sizes will
yield smaller numbers of indirect pointers accordingly.
The truncation process is accomplished with the help of two
major functions and a few helper functions.
Functions do_strip and recursive_scan are obsolete, so removed.
New function sweep_bh_for_rgrps cleans a buffer_head pointed to
by the given metapath and height. By cleaning, I mean it frees
all blocks starting at the offset passed in metapath. It starts
at the first block in the buffer pointed to by the metapath and
identifies its resource group (rgrp). From there it frees all
subsequent block pointers that lie within that rgrp. If it's
already inside a transaction, it stays within it as long as it
can. In other words, it doesn't close a transaction until it knows
it's freed what it can from the resource group. In this way,
multiple buffers may be cleaned in a single transaction, as long
as those blocks in the buffer all lie within the same rgrp.
If it's not in a transaction, it starts one. If the buffer_head
has references to blocks within multiple rgrps, it frees all the
blocks inside the first rgrp it finds, then closes the
transaction. Then it repeats the cycle: identifies the next
unfreed block, uses it to find its rgrp, then starts a new
transaction for that set. It repeats this process repeatedly
until the buffer_head contains no more references to any blocks
past the given metapath.
Function trunc_dealloc has been reworked into a finite state
automaton. It has basically 3 active states:
DEALLOC_MP_FULL, DEALLOC_MP_LOWER, and DEALLOC_FILL_MP:
The DEALLOC_MP_FULL state implies the metapath has a full set
of buffers out to the "shrink height", and therefore, it can
call function sweep_bh_for_rgrps to free the blocks within the
highest height of the metapath. If it's just swept the lowest
level (or an error has occurred) the state machine is ended.
Otherwise it proceeds to the DEALLOC_MP_LOWER state.
The DEALLOC_MP_LOWER state implies we are finished with a given
buffer_head, which may now be released, and therefore we are
then missing some buffer information from the metapath. So we
need to find more buffers to read in. In most cases, this is
just a matter of releasing the buffer_head and moving to the
next pointer from the previous height, so it may be read in and
swept as well. If it can't find another non-null pointer to
process, it checks whether it's reached the end of a height
and needs to lower the strip height, or whether it still needs
move forward through the previous height's metadata. In this
state, all zero-pointers are skipped. From this state, it can
only loop around (once more backing up another height) or,
once a valid metapath is found (one that has non-zero
pointers), proceed to state DEALLOC_FILL_MP.
The DEALLOC_FILL_MP state implies that we have a metapath
but not all its buffers are read in. So we must proceed to read
in buffer_heads until the metapath has a valid buffer for every
height. If the previous state backed us up 3 heights, we may
need to read in a buffer, increment the height, then repeat the
process until buffers have been read in for all required heights.
If it's successful reading a buffer, and it's at the highest
height we need, it proceeds back to the DEALLOC_MP_FULL state.
If it's unable to fill in a buffer, (encounters a hole, etc.)
it tries to find another non-zero block pointer. If they're all
zero, it lowers the height and returns to the DEALLOC_MP_LOWER
state. If it finds a good non-null pointer, it loops around and
reads it in, while keeping the metapath in lock-step with the
pointers it examines.
The state machine runs until the truncation request is
satisfied. Then any transactions are ended, the quota and
statfs data are updated, and the function is complete.
Helper function metaptr1 was introduced to be an easy way to
determine the start of a buffer_head's indirect pointers.
Helper function lookup_mp_height was introduced to find a
metapath index and read in the buffer that corresponds to it.
In this way, function lookup_metapath becomes a simple loop to
call it for every height.
Helper function fillup_metapath is similar to lookup_metapath
except it can do partial lookups. If the state machine
backed up multiple levels (like 2999 wrapping to 3000) it
needs to find out the next starting point and start issuing
metadata reads at that point.
Helper function hptrs is a shortcut to determine how many
pointers should be expected in a buffer. Height 0 is the dinode
which has fewer pointers than the others.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Commit 86066914ed "gfs2: Don't support
fallocate on jdata files" removed the ability of gfs2_grow to reserve
space at the end of the rindex, which could prevent a second gfs2_grow
from succeeding if the fs is full. Allow fallocate to work on the rindex
once again.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Revert commit 86d067a797: it turns out
that waiting for iopen glock dequeues here isn't needed anymore because
the bugs that commit was meant to fix have been fixed otherwise.
In addition, we want to avoid waiting on glocks in gfs2_evict_inode in
shrinker context because the shrinker may be invoked on behalf of DLM,
in which case calling into DLM again would deadlock. This commit makes
the described scenario less likely without completely avoiding it; it's
still a step in the right direction, though.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Switch from rhashtable_lookup_insert_fast + rhashtable_lookup_fast to
rhashtable_lookup_get_insert_fast, which is cleaner and avoids an extra
rhashtable lookup.
At the same time, turn the retry loop in gfs2_glock_get into an infinite
loop. The lookup or insert will eventually succeed, usually very fast,
but there is no reason to give up trying at a fixed number of
iterations.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch i_no_addr was not initialized until after the
return from allocating its block. That meant the i_no_addr was
temporarily uninitialized storage. Ordinarily that's not a concern,
but if inplace_reserve can't find space, it can call try_rgrp_unlink
which references i_no_addr as a block to avoid. That can result in
unpredictable behavior. More importantly, the trace point in
gfs2_alloc_blocks references ip->i_no_addr before it is set, which
is misleading when reading the kernel traces. This patch makes it
look like the new dinode block was assigned in the name of inode 0
rather than a random inode that's completely unrelated.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
As per a suggestion by Linus, don't pack struct lm_lockname: we did that
because the struct is used as a rhashtable key, but packing tells the
compiler that the 64-bit fields in the struct may be unaligned, causing
it to generate worse code on some architectures. Instead, rearrange the
fields in the struct so that there is no padding between fields, and
exclude any tail padding from the hash key size.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Both functions are identical except for the seq_operations used.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Function rhashtable_walk_init is deprecated.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
When the GFS2 file system withdraws due to metadata corruption, it
often has outstanding transactions in the journal and delayed work
queued for its glocks. This patch adds some new checks for a
withdrawn file system before proceeding with operations that would
obviously cause a BUG() to be triggered. That allows GFS2 to be
safely unmounted rather than cause the system to go down.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Commit 88ffbf3e03 switches to using rhashtables for glocks, hashing over
the entire struct lm_lockname instead of its individual fields. On some
architectures, struct lm_lockname contains a hole of uninitialized
memory due to alignment rules, which now leads to incorrect hash values.
Get rid of that hole.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
CC: <stable@vger.kernel.org> #v4.3+
Pull vfs 'statx()' update from Al Viro.
This adds the new extended stat() interface that internally subsumes our
previous stat interfaces, and allows user mode to specify in more detail
what kind of information it wants.
It also allows for some explicit synchronization information to be
passed to the filesystem, which can be relevant for network filesystems:
is the cached value ok, or do you need open/close consistency, or what?
From David Howells.
Andreas Dilger points out that the first version of the extended statx
interface was posted June 29, 2010:
https://www.spinics.net/lists/linux-fsdevel/msg33831.html
* 'rebased-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
statx: Add a system call to make enhanced file info available
Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.
The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode. This change is propagated to the vfs_getattr*()
function.
Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.
========
OVERVIEW
========
The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.
A number of requests were gathered for features to be included. The
following have been included:
(1) Make the fields a consistent size on all arches and make them large.
(2) Spare space, request flags and information flags are provided for
future expansion.
(3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
__s64).
(4) Creation time: The SMB protocol carries the creation time, which could
be exported by Samba, which will in turn help CIFS make use of
FS-Cache as that can be used for coherency data (stx_btime).
This is also specified in NFSv4 as a recommended attribute and could
be exported by NFSD [Steve French].
(5) Lightweight stat: Ask for just those details of interest, and allow a
netfs (such as NFS) to approximate anything not of interest, possibly
without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
Dilger] (AT_STATX_DONT_SYNC).
(6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
its cached attributes are up to date [Trond Myklebust]
(AT_STATX_FORCE_SYNC).
And the following have been left out for future extension:
(7) Data version number: Could be used by userspace NFS servers [Aneesh
Kumar].
Can also be used to modify fill_post_wcc() in NFSD which retrieves
i_version directly, but has just called vfs_getattr(). It could get
it from the kstat struct if it used vfs_xgetattr() instead.
(There's disagreement on the exact semantics of a single field, since
not all filesystems do this the same way).
(8) BSD stat compatibility: Including more fields from the BSD stat such
as creation time (st_btime) and inode generation number (st_gen)
[Jeremy Allison, Bernd Schubert].
(9) Inode generation number: Useful for FUSE and userspace NFS servers
[Bernd Schubert].
(This was asked for but later deemed unnecessary with the
open-by-handle capability available and caused disagreement as to
whether it's a security hole or not).
(10) Extra coherency data may be useful in making backups [Andreas Dilger].
(No particular data were offered, but things like last backup
timestamp, the data version number and the DOS archive bit would come
into this category).
(11) Allow the filesystem to indicate what it can/cannot provide: A
filesystem can now say it doesn't support a standard stat feature if
that isn't available, so if, for instance, inode numbers or UIDs don't
exist or are fabricated locally...
(This requires a separate system call - I have an fsinfo() call idea
for this).
(12) Store a 16-byte volume ID in the superblock that can be returned in
struct xstat [Steve French].
(Deferred to fsinfo).
(13) Include granularity fields in the time data to indicate the
granularity of each of the times (NFSv4 time_delta) [Steve French].
(Deferred to fsinfo).
(14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags.
Note that the Linux IOC flags are a mess and filesystems such as Ext4
define flags that aren't in linux/fs.h, so translation in the kernel
may be a necessity (or, possibly, we provide the filesystem type too).
(Some attributes are made available in stx_attributes, but the general
feeling was that the IOC flags were to ext[234]-specific and shouldn't
be exposed through statx this way).
(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
Michael Kerrisk].
(Deferred, probably to fsinfo. Finding out if there's an ACL or
seclabal might require extra filesystem operations).
(16) Femtosecond-resolution timestamps [Dave Chinner].
(A __reserved field has been left in the statx_timestamp struct for
this - if there proves to be a need).
(17) A set multiple attributes syscall to go with this.
===============
NEW SYSTEM CALL
===============
The new system call is:
int ret = statx(int dfd,
const char *filename,
unsigned int flags,
unsigned int mask,
struct statx *buffer);
The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat(). There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.
Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):
(1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
respect.
(2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
its attributes with the server - which might require data writeback to
occur to get the timestamps correct.
(3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
network filesystem. The resulting values should be considered
approximate.
mask is a bitmask indicating the fields in struct statx that are of
interest to the caller. The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat(). It should be noted that asking for
more information may entail extra I/O operations.
buffer points to the destination for the data. This must be 256 bytes in
size.
======================
MAIN ATTRIBUTES RECORD
======================
The following structures are defined in which to return the main attribute
set:
struct statx_timestamp {
__s64 tv_sec;
__s32 tv_nsec;
__s32 __reserved;
};
struct statx {
__u32 stx_mask;
__u32 stx_blksize;
__u64 stx_attributes;
__u32 stx_nlink;
__u32 stx_uid;
__u32 stx_gid;
__u16 stx_mode;
__u16 __spare0[1];
__u64 stx_ino;
__u64 stx_size;
__u64 stx_blocks;
__u64 __spare1[1];
struct statx_timestamp stx_atime;
struct statx_timestamp stx_btime;
struct statx_timestamp stx_ctime;
struct statx_timestamp stx_mtime;
__u32 stx_rdev_major;
__u32 stx_rdev_minor;
__u32 stx_dev_major;
__u32 stx_dev_minor;
__u64 __spare2[14];
};
The defined bits in request_mask and stx_mask are:
STATX_TYPE Want/got stx_mode & S_IFMT
STATX_MODE Want/got stx_mode & ~S_IFMT
STATX_NLINK Want/got stx_nlink
STATX_UID Want/got stx_uid
STATX_GID Want/got stx_gid
STATX_ATIME Want/got stx_atime{,_ns}
STATX_MTIME Want/got stx_mtime{,_ns}
STATX_CTIME Want/got stx_ctime{,_ns}
STATX_INO Want/got stx_ino
STATX_SIZE Want/got stx_size
STATX_BLOCKS Want/got stx_blocks
STATX_BASIC_STATS [The stuff in the normal stat struct]
STATX_BTIME Want/got stx_btime{,_ns}
STATX_ALL [All currently available stuff]
stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.
Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution. Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.
The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does. The following
attributes map to FS_*_FL flags and are the same numerical value:
STATX_ATTR_COMPRESSED File is compressed by the fs
STATX_ATTR_IMMUTABLE File is marked immutable
STATX_ATTR_APPEND File is append-only
STATX_ATTR_NODUMP File is not to be dumped
STATX_ATTR_ENCRYPTED File requires key to decrypt in fs
Within the kernel, the supported flags are listed by:
KSTAT_ATTR_FS_IOC_FLAGS
[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]
New flags include:
STATX_ATTR_AUTOMOUNT Object is an automount trigger
These are for the use of GUI tools that might want to mark files specially,
depending on what they are.
Fields in struct statx come in a number of classes:
(0) stx_dev_*, stx_blksize.
These are local system information and are always available.
(1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
stx_size, stx_blocks.
These will be returned whether the caller asks for them or not. The
corresponding bits in stx_mask will be set to indicate whether they
actually have valid values.
If the caller didn't ask for them, then they may be approximated. For
example, NFS won't waste any time updating them from the server,
unless as a byproduct of updating something requested.
If the values don't actually exist for the underlying object (such as
UID or GID on a DOS file), then the bit won't be set in the stx_mask,
even if the caller asked for the value. In such a case, the returned
value will be a fabrication.
Note that there are instances where the type might not be valid, for
instance Windows reparse points.
(2) stx_rdev_*.
This will be set only if stx_mode indicates we're looking at a
blockdev or a chardev, otherwise will be 0.
(3) stx_btime.
Similar to (1), except this will be set to 0 if it doesn't exist.
=======
TESTING
=======
The following test program can be used to test the statx system call:
samples/statx/test-statx.c
Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.
Here's some example output. Firstly, an NFS directory that crosses to
another FSID. Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.
[root@andromeda ~]# /tmp/test-statx -A /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:26 Inode: 1703937 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)
Secondly, the result of automounting on that directory.
[root@andromeda ~]# /tmp/test-statx /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:27 Inode: 2 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add #include <linux/cred.h> dependencies to all .c files rely on sched.h
doing that for them.
Note that even if the count where we need to add extra headers seems high,
it's still a net win, because <linux/sched.h> is included in over
2,200 files ...
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to
take a vma and vmf parameter when the vma already resides in vmf.
Remove the vma parameter to simplify things.
[arnd@arndb.de: fix ARM build]
Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Price wrote this patch to close a nasty race condition
that allows access to glocks that are being destroyed. Without
this patch, GFS2 is vulnerable to random corruption and kernel
panic.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYrv8+AAoJENeLYdPf93o7T58H/i3K+awecX1yrCl9qvAvxte+
UJioZd9wnrjHsprFkMMzeVC2rFH5EIm5JKEyl8zGGwIq/oaGtgWlxQsBOvyOnSyx
WRvu99XjZTzu3vov7u1kiWmOOvVturdcALPHH6mFdgkCw8d15AHqQdfDvljfWbRp
aHFc+x1evptskRTj4D7I6EeWig8v3Sr9qosJ2N8uKtsrcc/xIlh4ItsonlQh3Cz0
Dg83HVN2opHI5CWjRAjTK6zjF6XoEMgsjIOR4HLRVC9XEXiWLd3w+JBnTbFYJt0f
k8NMk8oGbmzTC/HteJvnzGuNfSlkk4RAwaCkYo7F9f6hcKsWPECzUdyHn3ubm7M=
=uIIs
-----END PGP SIGNATURE-----
Merge tag 'gfs2-4.11.addendum' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 fix from Bob Peterson:
"This is an addendum for the 4.11 merge window.
Andy Price wrote this patch to close a nasty race condition that
allows access to glocks that are being destroyed. Without this patch,
GFS2 is vulnerable to random corruption and kernel panic"
* tag 'gfs2-4.11.addendum' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Add missing rcu locking for glock lookup
We must hold the rcu read lock across looking up glocks and trying to
bump their refcount to prevent the glocks from being freed in between.
Cc: <stable@vger.kernel.org> # 4.3+
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Pull networking updates from David Miller:
"Highlights:
1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini
Varadhan.
2) Simplify classifier state on sk_buff in order to shrink it a bit.
From Willem de Bruijn.
3) Introduce SIPHASH and it's usage for secure sequence numbers and
syncookies. From Jason A. Donenfeld.
4) Reduce CPU usage for ICMP replies we are going to limit or
suppress, from Jesper Dangaard Brouer.
5) Introduce Shared Memory Communications socket layer, from Ursula
Braun.
6) Add RACK loss detection and allow it to actually trigger fast
recovery instead of just assisting after other algorithms have
triggered it. From Yuchung Cheng.
7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot.
8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert.
9) Export MPLS packet stats via netlink, from Robert Shearman.
10) Significantly improve inet port bind conflict handling, especially
when an application is restarted and changes it's setting of
reuseport. From Josef Bacik.
11) Implement TX batching in vhost_net, from Jason Wang.
12) Extend the dummy device so that VF (virtual function) features,
such as configuration, can be more easily tested. From Phil
Sutter.
13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric
Dumazet.
14) Add new bpf MAP, implementing a longest prefix match trie. From
Daniel Mack.
15) Packet sample offloading support in mlxsw driver, from Yotam Gigi.
16) Add new aquantia driver, from David VomLehn.
17) Add bpf tracepoints, from Daniel Borkmann.
18) Add support for port mirroring to b53 and bcm_sf2 drivers, from
Florian Fainelli.
19) Remove custom busy polling in many drivers, it is done in the core
networking since 4.5 times. From Eric Dumazet.
20) Support XDP adjust_head in virtio_net, from John Fastabend.
21) Fix several major holes in neighbour entry confirmation, from
Julian Anastasov.
22) Add XDP support to bnxt_en driver, from Michael Chan.
23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan.
24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi.
25) Support GRO in IPSEC protocols, from Steffen Klassert"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits)
Revert "ath10k: Search SMBIOS for OEM board file extension"
net: socket: fix recvmmsg not returning error from sock_error
bnxt_en: use eth_hw_addr_random()
bpf: fix unlocking of jited image when module ronx not set
arch: add ARCH_HAS_SET_MEMORY config
net: napi_watchdog() can use napi_schedule_irqoff()
tcp: Revert "tcp: tcp_probe: use spin_lock_bh()"
net/hsr: use eth_hw_addr_random()
net: mvpp2: enable building on 64-bit platforms
net: mvpp2: switch to build_skb() in the RX path
net: mvpp2: simplify MVPP2_PRS_RI_* definitions
net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT
net: mvpp2: remove unused register definitions
net: mvpp2: simplify mvpp2_bm_bufs_add()
net: mvpp2: drop useless fields in mvpp2_bm_pool and related code
net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue'
net: mvpp2: release reference to txq_cpu[] entry after unmapping
net: mvpp2: handle too large value in mvpp2_rx_time_coal_set()
net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set()
net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=z7AL
-----END PGP SIGNATURE-----
Merge tag 'for-4.11/linus-merge-signed' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
- blk-mq scheduling framework from me and Omar, with a port of the
deadline scheduler for this framework. A port of BFQ from Paolo is in
the works, and should be ready for 4.12.
- Various fixups and improvements to the above scheduling framework
from Omar, Paolo, Bart, me, others.
- Cleanup of the exported sysfs blk-mq data into debugfs, from Omar.
This allows us to export more information that helps debug hangs or
performance issues, without cluttering or abusing the sysfs API.
- Fixes for the sbitmap code, the scalable bitmap code that was
migrated from blk-mq, from Omar.
- Removal of the BLOCK_PC support in struct request, and refactoring of
carrying SCSI payloads in the block layer. This cleans up the code
nicely, and enables us to kill the SCSI specific parts of struct
request, shrinking it down nicely. From Christoph mainly, with help
from Hannes.
- Support for ranged discard requests and discard merging, also from
Christoph.
- Support for OPAL in the block layer, and for NVMe as well. Mainly
from Scott Bauer, with fixes/updates from various others folks.
- Error code fixup for gdrom from Christophe.
- cciss pci irq allocation cleanup from Christoph.
- Making the cdrom device operations read only, from Kees Cook.
- Fixes for duplicate bdi registrations and bdi/queue life time
problems from Jan and Dan.
- Set of fixes and updates for lightnvm, from Matias and Javier.
- A few fixes for nbd from Josef, using idr to name devices and a
workqueue deadlock fix on receive. Also marks Josef as the current
maintainer of nbd.
- Fix from Josef, overwriting queue settings when the number of
hardware queues is updated for a blk-mq device.
- NVMe fix from Keith, ensuring that we don't repeatedly mark and IO
aborted, if we didn't end up aborting it.
- SG gap merging fix from Ming Lei for block.
- Loop fix also from Ming, fixing a race and crash between setting loop
status and IO.
- Two block race fixes from Tahsin, fixing request list iteration and
fixing a race between device registration and udev device add
notifiations.
- Double free fix from cgroup writeback, from Tejun.
- Another double free fix in blkcg, from Hou Tao.
- Partition overflow fix for EFI from Alden Tondettar.
* tag 'for-4.11/linus-merge-signed' of git://git.kernel.dk/linux-block: (156 commits)
nvme: Check for Security send/recv support before issuing commands.
block/sed-opal: allocate struct opal_dev dynamically
block/sed-opal: tone down not supported warnings
block: don't defer flushes on blk-mq + scheduling
blk-mq-sched: ask scheduler for work, if we failed dispatching leftovers
blk-mq: don't special case flush inserts for blk-mq-sched
blk-mq-sched: don't add flushes to the head of requeue queue
blk-mq: have blk_mq_dispatch_rq_list() return if we queued IO or not
block: do not allow updates through sysfs until registration completes
lightnvm: set default lun range when no luns are specified
lightnvm: fix off-by-one error on target initialization
Maintainers: Modify SED list from nvme to block
Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN
uapi: sed-opal fix IOW for activate lsp to use correct struct
cdrom: Make device operations read-only
elevator: fix loading wrong elevator type for blk-mq devices
cciss: switch to pci_irq_alloc_vectors
block/loop: fix race between I/O and set_status
blk-mq-sched: don't hold queue_lock when calling exit_icq
block: set make_request_fn manually in blk_mq_update_nr_hw_queues
...
1. Andy Price submitted a patch to make gfs2_write_full_page a
static function.
2. Dan Carpenter submitted a patch to fix a ERR_PTR thinko.
I've also got a few patches, three of which fix bugs related to
deleting very large files, which cause GFS2 to run out of
journal space:
3. The first one prevents GFS2 delete operation from requesting too
much journal space.
4. The second one fixes a problem whereby GFS2 can hang because it
wasn't taking journal space demand into its calculations.
5. The third one wakes up IO waiters when a flush is done to restart
processes stuck waiting for journal space to become available.
The other three patches are a performance improvement related to
spin_lock contention between multiple writers:
6. The "tr_touched" variable was switched to a flag to be more atomic
and eliminate the possibility of some races.
7. Function meta_lo_add was moved inline with its only caller to make
the code more readable and efficient.
8. Contention on the gfs2_log_lock spinlock was greatly reduced by
avoiding the lock altogether in cases where we don't really need
it: buffers that already appear in the appropriate metadata list
for the journal. Many thanks to Steve Whitehouse for the ideas and
principles behind these patches.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYrEEEAAoJENeLYdPf93o7bjoIAIqPG/EAzi+idgMWDPQa9Eit
53dPy16snkrbWwtaK6spSWlH6bGYuHeanXORYon9bvtVjKYaa4NQclGihN2IE6uB
O8zT+MGwP45LDhNplVJpumaOALZ9ZDqQSe+3tHeNK3FhNirLyiIjSqrHt/7Yi1qi
fPLlT4Jx0TBo5rhvEGa7Yg01WhWVtnmVSMqJXj/7ZtC50s1aPyDUikdNIDfDCN2X
LxfKGDXuk6p63VQ6JKqYSBVATCR0/bbKfkuk/kBUTYLoHoapImxB8d0HgIdsh1Mv
9PlbZnnNW8k5oapuhVxjl0T5G0JsQgCkPb/wlte+ryOCjBoc2L2fCUV5qc0QxWc=
=xQyl
-----END PGP SIGNATURE-----
Merge tag 'gfs2-4.11.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Robert Peterson:
"We've got eight GFS2 patches for this merge window:
- Andy Price submitted a patch to make gfs2_write_full_page a static
function.
- Dan Carpenter submitted a patch to fix a ERR_PTR thinko.
Three patches fix bugs related to deleting very large files, which
cause GFS2 to run out of journal space:
- The first one prevents GFS2 delete operation from requesting too
much journal space.
- The second one fixes a problem whereby GFS2 can hang because it
wasn't taking journal space demand into its calculations.
- The third one wakes up IO waiters when a flush is done to restart
processes stuck waiting for journal space to become available.
The final three patches are a performance improvement related to
spin_lock contention between multiple writers:
- The "tr_touched" variable was switched to a flag to be more atomic
and eliminate the possibility of some races.
- Function meta_lo_add was moved inline with its only caller to make
the code more readable and efficient.
- Contention on the gfs2_log_lock spinlock was greatly reduced by
avoiding the lock altogether in cases where we don't really need
it: buffers that already appear in the appropriate metadata list
for the journal. Many thanks to Steve Whitehouse for the ideas and
principles behind these patches"
* tag 'gfs2-4.11.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Make gfs2_write_full_page static
GFS2: Reduce contention on gfs2_log_lock
GFS2: Inline function meta_lo_add
GFS2: Switch tr_touched to flag in transaction
GFS2: Wake up io waiters whenever a flush is done
GFS2: Made logd daemon take into account log demand
GFS2: Limit number of transaction blocks requested for truncates
GFS2: Fix reference to ERR_PTR in gfs2_glock_iter_next
The function glock_hash_walk walks the rhashtable by hand. This
is broken because if it catches the hash table in the middle of
a rehash, then it will miss entries.
This patch replaces the manual walk by using the rhashtable walk
interface.
Fixes: 88ffbf3e03 ("GFS2: Use resizable hash table for glocks")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
It only gets called from aops.c and doesn't appear in any headers.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
We will want to have struct backing_dev_info allocated separately from
struct request_queue. As the first step add pointer to backing_dev_info
to request_queue and convert all users touching it. No functional
changes in this patch.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch modifies functions gfs2_trans_add_meta and _data so that
they check whether the buffer_head is already in a transaction,
and if so, avoid taking the gfs2_log_lock.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This patch simply combines function meta_lo_add with its only
caller, trans_add_meta. This makes the code easier to read and
will make it easier to reduce contention on gfs2_log_lock.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This patch eliminates the int variable tr_touched in favor of a
new flag in the transaction. This is a step toward reducing contention
on the gfs2_log_lock spin_lock.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, if a process called function gfs2_log_reserve to
reserve some journal blocks, but the journal not enough blocks were
free, it would call io_schedule. However, in the log flush daemon,
it woke up the waiters only if an gfs2_ail_flush was no longer
required. This resulted in situations where processes would wait
forever because the number of blocks required was so high that it
pushed the journal into a perpetual state of flush being required.
This patch changes the logd daemon so that it wakes up io waiters
every time the log is actually flushed.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, the logd daemon only tried to flush things when
the log blocks pinned exceeded a certain threshold. But when we're
deleting very large files, it may require a huge number of journal
blocks, and that, in turn, may exceed the threshold. This patch
factors that into account.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This patch limits the number of transaction blocks requested during
file truncates. If we have very large multi-terabyte files, and want
to delete or truncate them, they might span so many resource groups
that we overflow the journal blocks, and cause an assert failure.
By limiting the number of blocks in the transaction, we prevent this
overflow and give other running processes time to do transactions.
The limiting factor I chose is sd_log_thresh2 which is currently
set to 4/5ths of the journal. This same ratio is used in function
gfs2_ail_flush_reqd to determine when a log flush is required.
If we make the maximum value less than this, we can get into a
infinite hang whereby the log stops moving because the number of
used blocks is less than the threshold and the iterative loop
needs more, but since we're under the threshold, the log daemon
never starts any IO on the log.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
ktime_set(S,N) was required for the timespec storage type and is still
useful for situations where a Seconds and Nanoseconds part of a time value
needs to be converted. For anything where the Seconds argument is 0, this
is pointless and can be replaced with a simple assignment.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull partial readlink cleanups from Miklos Szeredi.
This is the uncontroversial part of the readlink cleanup patch-set that
simplifies the default readlink handling.
Miklos and Al are still discussing the rest of the series.
* git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
vfs: make generic_readlink() static
vfs: remove ".readlink = generic_readlink" assignments
vfs: default to generic_readlink()
vfs: replace calling i_op->readlink with vfs_readlink()
proc/self: use generic_readlink
ecryptfs: use vfs_get_link()
bad_inode: add missing i_op initializers
Pull more vfs updates from Al Viro:
"In this pile:
- autofs-namespace series
- dedupe stuff
- more struct path constification"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits)
ocfs2: implement the VFS clone_range, copy_range, and dedupe_range features
ocfs2: charge quota for reflinked blocks
ocfs2: fix bad pointer cast
ocfs2: always unlock when completing dio writes
ocfs2: don't eat io errors during _dio_end_io_write
ocfs2: budget for extent tree splits when adding refcount flag
ocfs2: prohibit refcounted swapfiles
ocfs2: add newlines to some error messages
ocfs2: convert inode refcount test to a helper
simple_write_end(): don't zero in short copy into uptodate
exofs: don't mess with simple_write_{begin,end}
9p: saner ->write_end() on failing copy into non-uptodate page
fix gfs2_stuffed_write_end() on short copies
fix ceph_write_end()
nfs_write_end(): fix handling of short copies
vfs: refactor clone/dedupe_file_range common functions
fs: try to clone files first in vfs_copy_file_range
vfs: misc struct path constification
namespace.c: constify struct path passed to a bunch of primitives
quota: constify struct path in quota_on
...
This patch fixes a place where function gfs2_glock_iter_next can
reference an invalid error pointer.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
a) the page is uptodate - ->write_begin() would either fail (in which
case we don't reach ->write_end()), or unstuff the inode, or find the
page already uptodate, or do a successful call of stuffed_readpage(),
which would've made it uptodate
b) zeroing the tail in pagecache is wrong. kill -9 at the right time
while writing unmodified file contents to the same file should _not_
leave us in a situation when read() from the file will be reporting
it full of zeroes. Especially since that effect will be transient -
at some later point the page will be evicted and then we'll be back
to the real file contents.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If .readlink == NULL implies generic_readlink().
Generated by:
to_del="\.readlink.*=.*generic_readlink"
for i in `git grep -l $to_del`; do sed -i "/$to_del"/d $i; done
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add wbc_to_write_flags(), which returns the write modifier flags to use,
based on a struct writeback_control. No functional changes in this
patch, but it prepares us for factoring other wbc fields for write type.
Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Remove the WRITE_* and READ_SYNC wrappers, and just use the flags
directly. Where applicable this also drops usage of the
bio_set_op_attrs wrapper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Now that we don't need the common flags to overflow outside the range
of a 32-bit type we can encode them the same way for both the bio and
request fields. This in addition allows us to place the operation
first (and make some room for more ops while we're at it) and to
stop having to shift around the operation values.
In addition this allows passing around only one value in the block layer
instead of two (and eventuall also in the file systems, but we can do
that later) and thus clean up a lot of code.
Last but not least this allows decreasing the size of the cmd_flags
field in struct request to 32-bits. Various functions passing this
value could also be updated, but I'd like to avoid the churn for now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull more vfs updates from Al Viro:
">rename2() work from Miklos + current_time() from Deepa"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Replace current_fs_time() with current_time()
fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps
fs: Replace CURRENT_TIME with current_time() for inode timestamps
fs: proc: Delete inode time initializations in proc_alloc_inode()
vfs: Add current_time() api
vfs: add note about i_op->rename changes to porting
fs: rename "rename2" i_op to "rename"
vfs: remove unused i_op->rename
fs: make remaining filesystems use .rename2
libfs: support RENAME_NOREPLACE in simple_rename()
fs: support RENAME_NOREPLACE for local filesystems
ncpfs: fix unused variable warning
Pull vfs xattr updates from Al Viro:
"xattr stuff from Andreas
This completes the switch to xattr_handler ->get()/->set() from
->getxattr/->setxattr/->removexattr"
* 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: Remove {get,set,remove}xattr inode operations
xattr: Stop calling {get,set,remove}xattr inode operations
vfs: Check for the IOP_XATTR flag in listxattr
xattr: Add __vfs_{get,set,remove}xattr helpers
libfs: Use IOP_XATTR flag for empty directory handling
vfs: Use IOP_XATTR flag for bad-inode handling
vfs: Add IOP_XATTR inode operations flag
vfs: Move xattr_resolve_name to the front of fs/xattr.c
ecryptfs: Switch to generic xattr handlers
sockfs: Get rid of getxattr iop
sockfs: getxattr: Fail with -EOPNOTSUPP for invalid attribute names
kernfs: Switch to generic xattr handlers
hfs: Switch to generic xattr handlers
jffs2: Remove jffs2_{get,set,remove}xattr macros
xattr: Remove unnecessary NULL attribute name check
Pull misc vfs updates from Al Viro:
"Assorted misc bits and pieces.
There are several single-topic branches left after this (rename2
series from Miklos, current_time series from Deepa Dinamani, xattr
series from Andreas, uaccess stuff from from me) and I'd prefer to
send those separately"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (39 commits)
proc: switch auxv to use of __mem_open()
hpfs: support FIEMAP
cifs: get rid of unused arguments of CIFSSMBWrite()
posix_acl: uapi header split
posix_acl: xattr representation cleanups
fs/aio.c: eliminate redundant loads in put_aio_ring_file
fs/internal.h: add const to ns_dentry_operations declaration
compat: remove compat_printk()
fs/buffer.c: make __getblk_slow() static
proc: unsigned file descriptors
fs/file: more unsigned file descriptors
fs: compat: remove redundant check of nr_segs
cachefiles: Fix attempt to read i_blocks after deleting file [ver #2]
cifs: don't use memcpy() to copy struct iov_iter
get rid of separate multipage fault-in primitives
fs: Avoid premature clearing of capabilities
fs: Give dentry to inode_change_ok() instead of inode
fuse: Propagate dentry down to inode_change_ok()
ceph: Propagate dentry down to inode_change_ok()
xfs: Propagate dentry down to inode_change_ok()
...
These inode operations are no longer used; remove them.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull VFS splice updates from Al Viro:
"There's a bunch of branches this cycle, both mine and from other folks
and I'd rather send pull requests separately.
This one is the conversion of ->splice_read() to ITER_PIPE iov_iter
(and introduction of such). Gets rid of a lot of code in fs/splice.c
and elsewhere; there will be followups, but these are for the next
cycle... Some pipe/splice-related cleanups from Miklos in the same
branch as well"
* 'work.splice_read' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
pipe: fix comment in pipe_buf_operations
pipe: add pipe_buf_steal() helper
pipe: add pipe_buf_confirm() helper
pipe: add pipe_buf_release() helper
pipe: add pipe_buf_get() helper
relay: simplify relay_file_read()
switch default_file_splice_read() to use of pipe-backed iov_iter
switch generic_file_splice_read() to use of ->read_iter()
new iov_iter flavour: pipe-backed
fuse_dev_splice_read(): switch to add_to_pipe()
skb_splice_bits(): get rid of callback
new helper: add_to_pipe()
splice: lift pipe_lock out of splice_to_pipe()
splice: switch get_iovec_page_array() to iov_iter
splice_to_pipe(): don't open-code wakeup_pipe_readers()
consistent treatment of EFAULT on O_DIRECT read/write
1. Fabian Frederick submitted a nice cleanup that uses the BIT macro
rather than bit shifting.
2. Andreas Gruenbacher contributed a patch that fixes a long-standing
annoyance whereby GFS2 warned about dirty pages.
3. Andreas also fixed a problem with the recent extended attribute
readahead feature.
4. Chao Yu contributed a patch that checks the return code from function
register_shrinker and reacts accordingly. Previously, it was not checked.
5. Andreas Gruenbacher also fixed a problem whereby incore file timestamps
were forgotten if the file was invalidated. This merely moves the
assignment inside the inode glock where it belongs.
6. He also fixed a problem where incore timestamps were not initialized.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJX8oqYAAoJENeLYdPf93o7m5YIAIvBQ4WAmMmNuLT0AkvXIKXW
ZHXtV5oizSOl+qOrb5x3ANbnZWZ5NnWRP6E0frDf3Y5wk6U4qWAqU0V8BTbdr2E+
IryOLQ+62CAa4UbHqgQRFCpwkPxEaCsOde7eQh/ppTyBKjP0da7tUvSfPcLrWU+9
qhYiqAv5qVk38JjFiwhw4zER+dOCPDIg1xkkMPG6fspjM8/CkXR9p4lh73qNJT/j
NDzyjHSBYK32lkcb5xagjpLjmN/fIm6gXvdk65bD1euqxfUeuSCg6AF8QWkEXkcB
pbqQVIOWrZixS9HMTqT7w8nNstsBKSrEwQhulZWBZygRAzJJAWu6IaHQ9gZkUsE=
=1Fjo
-----END PGP SIGNATURE-----
Merge tag 'gfs2-4.8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Bob Peterson:
"We've only got six GFS2 patches for this merge window. In patch
order:
- Fabian Frederick submitted a nice cleanup that uses the BIT macro
rather than bit shifting.
- Andreas Gruenbacher contributed a patch that fixes a long-standing
annoyance whereby GFS2 warned about dirty pages.
- Andreas also fixed a problem with the recent extended attribute
readahead feature.
- Chao Yu contributed a patch that checks the return code from
function register_shrinker and reacts accordingly. Previously, it
was not checked.
- Andreas Gruenbacher also fixed a problem whereby incore file
timestamps were forgotten if the file was invalidated. This merely
moves the assignment inside the inode glock where it belongs.
- Andreas also fixed a problem where incore timestamps were not
initialized"
* tag 'gfs2-4.8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Initialize atime of I_NEW inodes
gfs2: Update file times after grabbing glock
gfs2: fix to detect failure of register_shrinker
gfs2: Fix extended attribute readahead optimization
gfs2: Remove dirty buffer warning from gfs2_releasepage
GFS2: use BIT() macro
CURRENT_TIME macro is not appropriate for filesystems as it
doesn't use the right granularity for filesystem timestamps.
Use current_time() instead.
CURRENT_TIME is also not y2038 safe.
This is also in preparation for the patch that transitions
vfs timestamps to use 64 bit time and hence make them
y2038 safe. As part of the effort current_time() will be
extended to do range checks. Hence, it is necessary for all
file system timestamps to use current_time(). Also,
current_time() will be transitioned along with vfs to be
y2038 safe.
Note that whenever a single call to current_time() is used
to change timestamps in different inodes, it is because they
share the same time granularity.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Felipe Balbi <balbi@kernel.org>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fix for commit 719ee344: initialize atime of I_NEW inodes to 0 so that
the timestamps read from disk will always be more recent than the
initial timestamp, and the atime in the I_NEW inode will be set correctly.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
In gfs2_page_mkwrite, grab the inode glock in EX mode before calling
file_update_time: grabbing the lock may result in a call to
gfs2_dinode_in, which will reset the file times to their on-disk state.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
inode_change_ok() will be resposible for clearing capabilities and IMA
extended attributes and as such will need dentry. Give it as an argument
to inode_change_ok() instead of an inode. Also rename inode_change_ok()
to setattr_prepare() to better relect that it does also some
modifications in addition to checks.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
When file permissions are modified via chmod(2) and the user is not in
the owning group or capable of CAP_FSETID, the setgid bit is cleared in
inode_change_ok(). Setting a POSIX ACL via setxattr(2) sets the file
permissions as well as the new ACL, but doesn't clear the setgid bit in
a similar way; this allows to bypass the check in chmod(2). Fix that.
References: CVE-2016-7097
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
register_shrinker can fail after commit 1d3d4437ea ("vmscan: per-node
deferred work"), we should detect the failure of it, otherwise we may
fail to register shrinker after gfs2 module was been inited successfully.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Commit 39b0555f didn't check for a failing bio_add_page in
gfs2_submit_bhs. This could cause I/O requests to get lost, and the
affected buffer heads to stay locked forever. Fix that by submitting
the current bio and allocating another one when bio_add_page fails. (It
is guaranteed that we can at least add one page to a bio.)
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Unlike what its documentation suggests, the releasepage address space
operation can currently be called on dirty pages via shrink_active_list.
This may eventually be changed when the remaining code relying on the
current behavior has been fixed, but until then, it makes no sense to
warn on dirty buffers in gfs2_releasepage.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
In most cases, EPERM is returned on immutable inode, and there're only a
few places returning EACCES. I noticed this when running LTP on
overlayfs, setxattr03 failed due to unexpected EACCES on immutable
inode.
So converting all EACCES to EPERM on immutable inode.
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace 1 << value shift by more explicit BIT() macro
Also fixes two bare unsigned definitions:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+ unsigned hsize = BIT(ip->i_depth);
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Pull block driver updates from Jens Axboe:
"This branch also contains core changes. I've come to the conclusion
that from 4.9 and forward, I'll be doing just a single branch. We
often have dependencies between core and drivers, and it's hard to
always split them up appropriately without pulling core into drivers
when that happens.
That said, this contains:
- separate secure erase type for the core block layer, from
Christoph.
- set of discard fixes, from Christoph.
- bio shrinking fixes from Christoph, as a followup up to the
op/flags change in the core branch.
- map and append request fixes from Christoph.
- NVMeF (NVMe over Fabrics) code from Christoph. This is pretty
exciting!
- nvme-loop fixes from Arnd.
- removal of ->driverfs_dev from Dan, after providing a
device_add_disk() helper.
- bcache fixes from Bhaktipriya and Yijing.
- cdrom subchannel read fix from Vchannaiah.
- set of lightnvm updates from Wenwei, Matias, Johannes, and Javier.
- set of drbd updates and fixes from Fabian, Lars, and Philipp.
- mg_disk error path fix from Bart.
- user notification for failed device add for loop, from Minfei.
- NVMe in general:
+ NVMe delay quirk from Guilherme.
+ SR-IOV support and command retry limits from Keith.
+ fix for memory-less NUMA node from Masayoshi.
+ use UINT_MAX for discard sectors, from Minfei.
+ cancel IO fixes from Ming.
+ don't allocate unused major, from Neil.
+ error code fixup from Dan.
+ use constants for PSDT/FUSE from James.
+ variable init fix from Jay.
+ fabrics fixes from Ming, Sagi, and Wei.
+ various fixes"
* 'for-4.8/drivers' of git://git.kernel.dk/linux-block: (115 commits)
nvme/pci: Provide SR-IOV support
nvme: initialize variable before logical OR'ing it
block: unexport various bio mapping helpers
scsi/osd: open code blk_make_request
target: stop using blk_make_request
block: simplify and export blk_rq_append_bio
block: ensure bios return from blk_get_request are properly initialized
virtio_blk: use blk_rq_map_kern
memstick: don't allow REQ_TYPE_BLOCK_PC requests
block: shrink bio size again
block: simplify and cleanup bvec pool handling
block: get rid of bio_rw and READA
block: don't ignore -EOPNOTSUPP blkdev_issue_write_same
block: introduce BLKDEV_DISCARD_ZERO to fix zeroout
NVMe: don't allocate unused nvme_major
nvme: avoid crashes when node 0 is memoryless node.
nvme: Limit command retries
loop: Make user notify for adding loop device failed
nvme-loop: fix nvme-loop Kconfig dependencies
nvmet: fix return value check in nvmet_subsys_alloc()
...
Pull core block updates from Jens Axboe:
- the big change is the cleanup from Mike Christie, cleaning up our
uses of command types and modified flags. This is what will throw
some merge conflicts
- regression fix for the above for btrfs, from Vincent
- following up to the above, better packing of struct request from
Christoph
- a 2038 fix for blktrace from Arnd
- a few trivial/spelling fixes from Bart Van Assche
- a front merge check fix from Damien, which could cause issues on
SMR drives
- Atari partition fix from Gabriel
- convert cfq to highres timers, since jiffies isn't granular enough
for some devices these days. From Jan and Jeff
- CFQ priority boost fix idle classes, from me
- cleanup series from Ming, improving our bio/bvec iteration
- a direct issue fix for blk-mq from Omar
- fix for plug merging not involving the IO scheduler, like we do for
other types of merges. From Tahsin
- expose DAX type internally and through sysfs. From Toshi and Yigal
* 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits)
block: Fix front merge check
block: do not merge requests without consulting with io scheduler
block: Fix spelling in a source code comment
block: expose QUEUE_FLAG_DAX in sysfs
block: add QUEUE_FLAG_DAX for devices to advertise their DAX support
Btrfs: fix comparison in __btrfs_map_block()
block: atari: Return early for unsupported sector size
Doc: block: Fix a typo in queue-sysfs.txt
cfq-iosched: Charge at least 1 jiffie instead of 1 ns
cfq-iosched: Fix regression in bonnie++ rewrite performance
cfq-iosched: Convert slice_resid from u64 to s64
block: Convert fifo_time from ulong to u64
blktrace: avoid using timespec
block/blk-cgroup.c: Declare local symbols static
block/bio-integrity.c: Add #include "blk.h"
block/partition-generic.c: Remove a set-but-not-used variable
block: bio: kill BIO_MAX_SIZE
cfq-iosched: temporarily boost queue priority for idle classes
block: drbd: avoid to use BIO_MAX_SIZE
block: bio: remove BIO_MAX_SECTORS
...
of nasty outcomes when inodes are transitioned from the unlinked state
to the free state. Small file systems are particularly vulnerable to these
problems, and it can manifest as mainly hangs, but also file system
corruption. The patches have been tested for literally many weeks, with a
very gruelling test, so I have a high level of confidence.
- Andreas Gruenbacher wrote a series of 5 patches for various lockups
during the transition of inodes from unlinked to free. The main patch
is titled "Fix gfs2_lookup_by_inum lock inversion" and the other 4 are
support and cleanup patches related to that.
- Ben Marzinski contributed 2 patches with regard to a recreatable
problem when gfs2 tries to write a page to a file that is being
truncated, resulting in a BUG() in gfs2_remove_from_journal.
Note that Ben had to export vfs function __block_write_full_page to get
this to work properly. It's been posted a long time and he talked to
various VFS people about it, and nobody seemed to mind.
- I contributed 3 patches. (1) The first one fixes a memory corruptor:
a race in which one process can overwrite the gl_object pointer set by
another process, causing kernel panic and other symptoms. (2) The second
patch fixes another race that resulted in a false-positive BUG_ON. This
occurred when resource group reservations were freed by one process
while another process was trying to grab a new reservation in the same
resource group. (3) The third patch fixes a problem with doing journal
replay when the journals are not all the same size.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXklXIAAoJENeLYdPf93o7AbIIAImLEixK+4CaItEArAKG9TXv
WbO+eDJfo6AOtAteB6+MdX2UxXAHJsCY6RmiEIAi5LzlVFiiCgRo4z/QgDARAw3c
2RxlndElaESh82S27sLiFbgZeY7GZv04C0t6AzMkc830BLXiKMs6bXfeq1fzW8Sf
AgAneACVsX0faRWo/XDuQcK81dwZ+qdOnR2+FvtOSFl1KgV0BrtnsW7IHv+5MIot
SREDN7VvSQwQrLgwMlC0PvhwK3KCVvuO9ZziLEPpYJONESJfEmuCpG265+tUJNTw
dIcW3p/vvgow8fb56fSnAxaeplPLlF9qJCq1M9fWZrKVbHg2uyCZMx4P52Fnmz4=
=uUVs
-----END PGP SIGNATURE-----
Merge tag 'gfs2-4.7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Bob Peterson:
"We've got ten patches this time, half of which are related to a
plethora of nasty outcomes when inodes are transitioned from the
unlinked state to the free state. Small file systems are particularly
vulnerable to these problems, and it can manifest as mainly hangs, but
also file system corruption. The patches have been tested for
literally many weeks, with a very gruelling test, so I have a high
level of confidence.
- Andreas Gruenbacher wrote a series of five patches for various
lockups during the transition of inodes from unlinked to free.
The main patch is titled "Fix gfs2_lookup_by_inum lock inversion"
and the other four are support and cleanup patches related to that.
- Ben Marzinski contributed two patches with regard to a recreatable
problem when gfs2 tries to write a page to a file that is being
truncated, resulting in a BUG() in gfs2_remove_from_journal.
Note that Ben had to export vfs function __block_write_full_page to
get this to work properly. It's been posted a long time and he
talked to various VFS people about it, and nobody seemed to mind.
- I contributed 3 patches:
o The first one fixes a memory corruptor: a race in which one
process can overwrite the gl_object pointer set by another
process, causing kernel panic and other symptoms.
o The second patch fixes another race that resulted in a
false-positive BUG_ON. This occurred when resource group
reservations were freed by one process while another process
was trying to grab a new reservation in the same resource
group.
o The third patch fixes a problem with doing journal replay when
the journals are not all the same size"
* tag 'gfs2-4.7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
GFS2: Fix gfs2_replay_incr_blk for multiple journal sizes
GFS2: Check rs_free with rd_rsspin protection
gfs2: writeout truncated pages
fs: export __block_write_full_page
gfs2: Lock holder cleanup
gfs2: Large-filesystem fix for 32-bit systems
gfs2: Get rid of gfs2_ilookup
gfs2: Fix gfs2_lookup_by_inum lock inversion
gfs2: Initialize iopen glock holder for new inodes
GFS2: don't set rgrp gl_object until it's inserted into rgrp tree
Before this patch, if you used gfs2_jadd to add new journals of a
size smaller than the existing journals, replaying those new journals
would withdraw. That's because function gfs2_replay_incr_blk was
using the number of journal blocks (jd_block) from the superblock's
journal pointer. In other words, "My journal's max size" rather than
"the journal we're replaying's size." This patch changes the function
to use the size of the pertinent journal rather than always using the
journal we happen to be using.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
These two are confusing leftover of the old world order, combining
values of the REQ_OP_ and REQ_ namespaces. For callers that don't
special case we mostly just replace bi_rw with bio_data_dir or
op_is_write, except for the few cases where a switch over the REQ_OP_
values makes more sense. Any check for READA is replaced with an
explicit check for REQ_RAHEAD. Also remove the READA alias for
REQ_RAHEAD.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
For the last process to close a file opened for write, function
gfs2_rsqa_delete was deleting the file's inode's block reservation
out of the rgrp reservations tree. Then it was checking to make sure
rs_free was 0, but it was performing the check outside the protection
of rd_rsspin spin_lock. The rd_rsspin spin_lock protection is needed
to prevent a race between the process freeing the reservation and
another who is allocating a new set of blocks inside the same rgrp
for the same inode, thus changing its value.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
->atomic_open() can be given an in-lookup dentry *or* a negative one
found in dcache. Use d_in_lookup() to tell one from another, rather
than d_unhashed().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When gfs2 attempts to write a page to a file that is being truncated,
and notices that the page is completely outside of the file size, it
tries to invalidate it. However, this may require a transaction for
journaled data files to revoke any buffers from the page on the active
items list. Unfortunately, this can happen inside a log flush, where a
transaction cannot be started. Also, gfs2 may need to be able to remove
the buffer from the ail1 list before it can finish the log flush.
To deal with this, when writing a page of a file with data journalling
enabled gfs2 now skips the check to see if the write is outside the file
size, and simply writes it anyway. This situation can only occur when
the truncate code still has the file locked exclusively, and hasn't
marked this block as free in the metadata (which happens later in
truc_dealloc). After gfs2 writes this page out, the truncation code
will shortly invalidate it and write out any revokes if necessary.
To do this, gfs2 now implements its own version of block_write_full_page
without the check, and calls the newly exported __block_write_full_page.
It also no longer calls gfs2_writepage_common from gfs2_jdata_writepage.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Make the code more readable by cleaning up the different ways of
initializing lock holders and checking for initialized lock holders:
mark lock holders as uninitialized by setting the holder's glock to NULL
(gfs2_holder_mark_uninitialized) instead of zeroing out the entire
object or using a separate flag. Recognize initialized holders by their
non-NULL glock (gfs2_holder_initialized). Don't zero out holder objects
which are immeditiately initialized via gfs2_holder_init or
gfs2_glock_nq_init.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Commit ff34245d switched from iget5_locked to iget_locked among other
things, but iget_locked doesn't work for filesystems larger than 2^32
blocks on 32-bit systems. Switch back to iget5_locked. Filesystems
larger than 2^32 blocks are unrealistic to work well on 32-bit systems,
so this is mostly a code cleanliness fix.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Now that gfs2_lookup_by_inum only takes the inode glock for new inodes
(and not for cached inodes anymore), there no longer is a need to
optimize the cached-inode case in gfs2_get_dentry or delete_work_func,
and gfs2_ilookup can be removed.
In addition, gfs2_get_dentry wasn't checking the GFS2_DIF_SYSTEM flag in
i_diskflags in the gfs2_ilookup case (see gfs2_lookup_by_inum); this
inconsistency goes away as well.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
The current gfs2_lookup_by_inum takes the glock of a presumed inode
identified by block number, verifies that the block is indeed an inode,
and then instantiates and reads the new inode via gfs2_inode_lookup.
However, instantiating a new inode may block on freeing a previous
instance of that inode (__wait_on_freeing_inode), and freeing an inode
requires to take the glock already held, leading to lock inversion and
deadlock.
Fix this by first instantiating the new inode, then verifying that the
block is an inode (if required), and then reading in the new inode, all
in gfs2_inode_lookup.
If the block we are looking for is not an inode, we discard the new
inode via iget_failed, which marks inodes as bad and unhashes them.
Other tasks waiting on that inode will get back a bad inode back from
ilookup or iget_locked; in that case, retry the lookup.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
In gfs2_init_inode_once, initialize inode->i_iopen_gh.gh_gl to NULL:
otherwise, when gfs2_inode_lookup fails, the iopen glock holder can
remain unset and iget_failed can end up accessing random memory.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, function read_rindex_entry would set a rgrp
glock's gl_object pointer to itself before inserting the rgrp into
the rgrp rbtree. The problem is: if another process was also reading
the rgrp in, and had already inserted its newly created rgrp, then
the second call to read_rindex_entry would overwrite that value,
then return a bad return code to the caller. Later, other functions
would reference the now-freed rgrp memory by way of gl_object.
In some cases, that could result in gfs2_rgrp_brelse being called
twice for the same rgrp: once for the failed attempt and once for
the "real" rgrp release. Eventually the kernel would panic.
There are also a number of other things that could go wrong when
a kernel module is accessing freed storage. For example, this could
result in rgrp corruption because the fake rgrp would point to a
fake bitmap in memory too, causing gfs2_inplace_reserve to search
some random memory for free blocks, and find some, since we were
never setting rgd->rd_bits to NULL before freeing it.
This patch fixes the problem by not setting gl_object until we
have successfully inserted the rgrp into the rbtree. Also, it sets
rd_bits to NULL as it frees them, which will ensure any accidental
access to the wrong rgrp will result in a kernel panic rather than
file system corruption, which is preferred.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Separate the op from the rq_flag_bits and have gfs2
set/get the bio using bio_set_op_attrs/bio_op.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This has ll_rw_block users pass in the operation and flags separately,
so ll_rw_block can setup the bio op and bi_rw flags on the bio that
is submitted.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This has submit_bh users pass in the operation and flags separately,
so submit_bh_wbc can setup the bio op and bi_rw flags on the bio that
is submitted.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw
instead of passing it in. This makes that use the same as
generic_make_request and how we set the other bio fields.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Fixed up fs/ext4/crypto.c
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull vfs fixes from Al Viro:
"Followups to the parallel lookup work:
- update docs
- restore killability of the places that used to take ->i_mutex
killably now that we have down_write_killable() merged
- Additionally, it turns out that I missed a prerequisite for
security_d_instantiate() stuff - ->getxattr() wasn't the only thing
that could be called before dentry is attached to inode; with smack
we needed the same treatment applied to ->setxattr() as well"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
switch ->setxattr() to passing dentry and inode separately
switch xattr_handler->set() to passing dentry and inode separately
restore killability of old mutex_lock_killable(&inode->i_mutex) users
add down_write_killable_nested()
update D/f/directory-locking
Most users of IS_ERR_VALUE() in the kernel are wrong, as they
pass an 'int' into a function that takes an 'unsigned long'
argument. This happens to work because the type is sign-extended
on 64-bit architectures before it gets converted into an
unsigned type.
However, anything that passes an 'unsigned short' or 'unsigned int'
argument into IS_ERR_VALUE() is guaranteed to be broken, as are
8-bit integers and types that are wider than 'unsigned long'.
Andrzej Hajda has already fixed a lot of the worst abusers that
were causing actual bugs, but it would be nice to prevent any
users that are not passing 'unsigned long' arguments.
This patch changes all users of IS_ERR_VALUE() that I could find
on 32-bit ARM randconfig builds and x86 allmodconfig. For the
moment, this doesn't change the definition of IS_ERR_VALUE()
because there are probably still architecture specific users
elsewhere.
Almost all the warnings I got are for files that are better off
using 'if (err)' or 'if (err < 0)'.
The only legitimate user I could find that we get a warning for
is the (32-bit only) freescale fman driver, so I did not remove
the IS_ERR_VALUE() there but changed the type to 'unsigned long'.
For 9pfs, I just worked around one user whose calling conventions
are so obscure that I did not dare change the behavior.
I was using this definition for testing:
#define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \
unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO))
which ends up making all 16-bit or wider types work correctly with
the most plausible interpretation of what IS_ERR_VALUE() was supposed
to return according to its users, but also causes a compile-time
warning for any users that do not pass an 'unsigned long' argument.
I suggested this approach earlier this year, but back then we ended
up deciding to just fix the users that are obviously broken. After
the initial warning that caused me to get involved in the discussion
(fs/gfs2/dir.c) showed up again in the mainline kernel, Linus
asked me to send the whole thing again.
[ Updated the 9p parts as per Al Viro - Linus ]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.org/lkml/2016/1/7/363
Link: https://lkml.org/lkml/2016/5/27/486
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Abhi Das has two patches that fix a GFS2 splice issue (and an adjustment).
- Ben Marzinski has a patch which allows the proper unmount of a GFS2
file system after hitting a withdraw error.
- I have a patch to fix a problem where GFS2 would dereference an error
value, plus three cosmetic / refactoring patches.
- Daniel DeFreez has a patch to fix two glock reference count problems,
where GFS2 was not properly "uninitializing" its glock holder on error
paths.
- Denys Vlasenko has a patch to change a function to not be inlined,
thus reducing the memory footprint of the GFS2 module.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXP2KLAAoJENeLYdPf93o7nScH/jlDCv+JzwBwAiFEVelgB657
lFY+Q3bPvmcTaHiOqXzco7U1EeyvAuZ+x9duaFBBEGC2/NydIbkAdCP1XjDOTAGZ
aVVAP8qov4adFiXTfBdzMYjJ7DArOy/JRnlC8WK5OiD/3yxsXJZNlAHTgjjL/ZMq
PkhjxX2Lc9ZHGF9YIFTyeoBlqf1qO6WbhkxvSNefgq3c702QPM+T9XND5T1duGDF
ThEcXS2DRRoE+6wr3h+ruvS5kcfxXRLLausAgqNpj2FYQOFCQ6XXgGK8pyXA5V/t
3Vh8mHW0VmSjAfrRWslCRjd+APXoOf+7QHqOHUAA1dvQ6CGfC9qTETH9Wp32JCI=
=8g+a
-----END PGP SIGNATURE-----
Merge tag 'gfs2-4.7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Bob Peterson:
"We've got nine patches this time:
- Abhi Das has two patches that fix a GFS2 splice issue (and an
adjustment).
- Ben Marzinski has a patch which allows the proper unmount of a GFS2
file system after hitting a withdraw error.
- I have a patch to fix a problem where GFS2 would dereference an
error value, plus three cosmetic / refactoring patches.
- Daniel DeFreez has a patch to fix two glock reference count
problems, where GFS2 was not properly "uninitializing" its glock
holder on error paths.
- Denys Vlasenko has a patch to change a function to not be inlined,
thus reducing the memory footprint of the GFS2 module"
* tag 'gfs2-4.7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
GFS2: Refactor gfs2_remove_from_journal
GFS2: Remove allocation parms from gfs2_rbm_find
gfs2: use inode_lock/unlock instead of accessing i_mutex directly
GFS2: Add calls to gfs2_holder_uninit in two error handlers
GFS2: Don't dereference inode in gfs2_inode_lookup until it's valid
GFS2: fs/gfs2/glock.c: Deinline do_error, save 1856 bytes
gfs2: Use gfs2 wrapper to sync inode before calling generic_file_splice_read()
GFS2: Get rid of dead code in inode_go_demote_ok
GFS2: ignore unlock failures after withdraw
Pull remaining vfs xattr work from Al Viro:
"The rest of work.xattr (non-cifs conversions)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
btrfs: Switch to generic xattr handlers
ubifs: Switch to generic xattr handlers
jfs: Switch to generic xattr handlers
jfs: Clean up xattr name mapping
gfs2: Switch to generic xattr handlers
ceph: kill __ceph_removexattr()
ceph: Switch to generic xattr handlers
ceph: Get rid of d_find_alias in ceph_set_acl
Pull networking updates from David Miller:
"Highlights:
1) Support SPI based w5100 devices, from Akinobu Mita.
2) Partial Segmentation Offload, from Alexander Duyck.
3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE.
4) Allow cls_flower stats offload, from Amir Vadai.
5) Implement bpf blinding, from Daniel Borkmann.
6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is
actually using FASYNC these atomics are superfluous. From Eric
Dumazet.
7) Run TCP more preemptibly, also from Eric Dumazet.
8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e
driver, from Gal Pressman.
9) Allow creating ppp devices via rtnetlink, from Guillaume Nault.
10) Improve BPF usage documentation, from Jesper Dangaard Brouer.
11) Support tunneling offloads in qed, from Manish Chopra.
12) aRFS offloading in mlx5e, from Maor Gottlieb.
13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo
Leitner.
14) Add MSG_EOR support to TCP, this allows controlling packet
coalescing on application record boundaries for more accurate
socket timestamp sampling. From Martin KaFai Lau.
15) Fix alignment of 64-bit netlink attributes across the board, from
Nicolas Dichtel.
16) Per-vlan stats in bridging, from Nikolay Aleksandrov.
17) Several conversions of drivers to ethtool ksettings, from Philippe
Reynes.
18) Checksum neutral ILA in ipv6, from Tom Herbert.
19) Factorize all of the various marvell dsa drivers into one, from
Vivien Didelot
20) Add VF support to qed driver, from Yuval Mintz"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits)
Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m"
Revert "phy dp83867: Make rgmii parameters optional"
r8169: default to 64-bit DMA on recent PCIe chips
phy dp83867: Make rgmii parameters optional
phy dp83867: Fix compilation with CONFIG_OF_MDIO=m
bpf: arm64: remove callee-save registers use for tmp registers
asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions
switchdev: pass pointer to fib_info instead of copy
net_sched: close another race condition in tcf_mirred_release()
tipc: fix nametable publication field in nl compat
drivers: net: Don't print unpopulated net_device name
qed: add support for dcbx.
ravb: Add missing free_irq() calls to ravb_close()
qed: Remove a stray tab
net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings
net: ethernet: fec-mpc52xx: use phydev from struct net_device
bpf, doc: fix typo on bpf_asm descriptions
stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set
net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings
net: ethernet: fs-enet: use phydev from struct net_device
...
Pull vfs cleanups from Al Viro:
"More cleanups from Christoph"
* 'work.preadv2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
nfsd: use RWF_SYNC
fs: add RWF_DSYNC aand RWF_SYNC
ceph: use generic_write_sync
fs: simplify the generic_write_sync prototype
fs: add IOCB_SYNC and IOCB_DSYNC
direct-io: remove the offset argument to dio_complete
direct-io: eliminate the offset argument to ->direct_IO
xfs: eliminate the pos variable in xfs_file_dio_aio_write
filemap: remove the pos argument to generic_file_direct_write
filemap: remove pos variables in generic_file_read_iter
Switch to the generic xattr handlers and take the necessary glocks at
the layer below. The following are the new xattr "entry points"; they
are called with the glock held already in the following cases:
gfs2_xattr_get: From SELinux, during lookups.
gfs2_xattr_set: The glock is never held.
gfs2_get_acl: From gfs2_create_inode -> posix_acl_create and
gfs2_setattr -> posix_acl_chmod.
gfs2_set_acl: From gfs2_setattr -> posix_acl_chmod.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch makes two simple changes to function gfs2_remove_from_journal.
First, it removes the parameter that specifies the transaction.
Since it's always passed in as current->journal_info, we might as well
set that in the function rather than passing it in. Second, it changes
the meta parameter to use an enum to make the code more clear.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
ta-da!
The main issue is the lack of down_write_killable(), so the places
like readdir.c switched to plain inode_lock(); once killable
variants of rwsem primitives appear, that'll be dealt with.
lockdep side also might need more work
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
i_mutex has been replaced by i_rwsem and directly accessing the
non-existent i_mutex breaks the kernel build.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This will allow us to do per-I/O sync file writes, as required by a lot
of fileservers or storage targets.
XXX: Will need a few additional audits for O_DSYNC
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Including blkdev_direct_IO and dax_do_io. It has to be ki_pos to actually
work, so eliminate the superflous argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch fixes two locations that do not call gfs2_holder_uninit
if gfs2_glock_nq returns an error.
Signed-off-by: Daniel DeFreez <dcdefreez@ucdavis.edu>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Function gfs2_inode_lookup was dereferencing the inode, and after,
it checks for the value being NULL. We need to check that first.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This function compiles to 522 bytes of machine code.
Error paths are not very time critical.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
gfs2_file_splice_read() f_op grabs and releases the cluster-wide
inode glock to sync the inode size to the latest.
Without this, generic_file_splice_read() uses an older i_size value
and can return EOF for valid offsets in the inode.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Function inode_go_demote_ok had some code that was only executed
if gl_holders was not empty. However, if gl_holders was not empty,
the only caller, demote_ok(), returns before inode_go_demote_ok
would ever be called. Therefore, it's dead code, so I removed it.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
In certain cases, the 802.11 mesh pathtable code wants to
iterate over all of the entries in the forwarding table from
the receive path, which is inside an RCU read-side critical
section. Enable walks inside atomic sections by allowing
GFP_ATOMIC allocations for the walker state.
Change all existing callsites to pass in GFP_KERNEL.
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
[also adjust gfs2/glock.c and rhashtable tests]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After gfs2 has withdrawn the filesystem, it may still have many locks not
in the unlocked state. If it is using lock_dlm, it will failed trying
the unlocks since it has already unmounted the lock manager. Instead, it
should set the SDF_SKIP_DLM_UNLOCK flag on withdraw, to signal that
it can skip the lock_manager on unlocks, and failback to lock_nolock
style unlocking.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
We only have six patches ready for this merge window.
- Arnd Bergmann contributed a patch that fixes an uninitialized variable
warning.
- The second patch avoids a kernel panic due to referencing an iopen
glock that may not be held, in an error path.
- The third patch fixes a rounding error that caused xfs_tests direct IO
write "fsx" tests to fail on GFS2.
- The fourth patch tidies up the code path when glocks are being reused
to recreate a dinode that was recently deleted.
- The fifth reverts an ages-old patch that should no longer be needed, and
which interfered with the transition of dinodes from unlinked to free.
- And lastly, a patch to eliminate a function parameter that's not needed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJW6qcKAAoJENeLYdPf93o70SwH/0czrFBIWaPbRgyuGLNvye4G
qvfIk2Yky3UKfgUA+ZW+cAWkxeKubc9scMwce0elKxm0e03rNwIX0slIOx8hymj3
19AgMnj3kcCJvRLdkBITNqnd6vTY2quadLN3j8I2cCNbHOV0GelEkP4jWcTHB+2F
AG0ZJOsvvrcD1ClgdIvGdV52qipZApS/kgZjLpJBEyzxq8SpRe9vNqMDsDyoKWgi
yjp0+aJ0IJAWA24fzdT5HE4fb5yGRWehg51l6Z2mbfXAvT+oeKcYrQiq1zhUutHw
dT6SUHbjt+y0EulPClsf3r5zjRjVCCbpj0wkUY3kPB98lgnpAD2QnUP/JDA+CD0=
=xRmX
-----END PGP SIGNATURE-----
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Bob Peterson:
"We only have six patches ready for this merge window:
- Arnd Bergmann contributed a patch that fixes an uninitialized
variable warning.
- The second patch avoids a kernel panic due to referencing an iopen
glock that may not be held, in an error path.
- The third patch fixes a rounding error that caused xfs_tests direct
IO write "fsx" tests to fail on GFS2.
- The fourth patch tidies up the code path when glocks are being
reused to recreate a dinode that was recently deleted.
- The fifth reverts an ages-old patch that should no longer be
needed, and which interfered with the transition of dinodes from
unlinked to free.
- And lastly, a patch to eliminate a function parameter that's not
needed"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
GFS2: Eliminate parameter non_block on gfs2_inode_lookup
GFS2: Don't filter out I_FREEING inodes anymore
GFS2: Prevent delete work from occurring on glocks used for create
GFS2: Fix direct IO write rounding error
gfs2: avoid uninitialized variable warning
GFS2: Check if iopen is held when deleting inode
Now that we're not filtering out I_FREEING inodes from our lookups
anymore, we can eliminate the non_block parameter from the lookup
function.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
This patch basically reverts a very old patch from 2008,
7a9f53b3c1, with the title
"Alternate gfs2_iget to avoid looking up inodes being freed".
The original patch was designed to avoid a deadlock caused by lock
ordering with try_rgrp_unlink. The patch forced the function to not
find inodes that were being removed by VFS. The problem is, that
made it impossible for nodes to delete their own unlinked dinodes
after a certain point in time, because the inode needed was not found
by this filtering process. There is no longer a need for the patch,
since function try_rgrp_unlink no longer locks the inode: All it does
is queue the glock onto the delete work_queue, so there should be no
more deadlock.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch tries to prevent delete work (queued via iopen callback)
from executing if the glock is currently being used to create
a new inode.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
The fsx test in xfstests was failing because it was using direct IO
writes which were using a bad calculation. It was using
loff_t lstart = offset & (PAGE_CACHE_SIZE - 1); when it should be
loff_t lstart = offset & ~(PAGE_CACHE_SIZE - 1);
Thus, the write at offset 0x67e00 was calculating lstart to be
0xe00, the address of our corruption. Instead, it should have been
0x67000. This patch fixes the calculation.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
We get a bogus warning about a potential uninitialized variable
use in gfs2, because the compiler does not figure out that we
never use the leaf number if get_leaf_nr() returns an error:
fs/gfs2/dir.c: In function 'get_first_leaf':
fs/gfs2/dir.c:802:9: warning: 'leaf_no' may be used uninitialized in this function [-Wmaybe-uninitialized]
fs/gfs2/dir.c: In function 'dir_split_leaf':
fs/gfs2/dir.c:1021:8: warning: 'leaf_no' may be used uninitialized in this function [-Wmaybe-uninitialized]
Changing the 'if (!error)' to 'if (!IS_ERR_VALUE(error))' is
sufficient to let gcc understand that this is exactly the same
condition as in IS_ERR() so it can optimize the code path enough
to understand it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).
Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull security subsystem updates from James Morris:
- EVM gains support for loading an x509 cert from the kernel
(EVM_LOAD_X509), into the EVM trusted kernel keyring.
- Smack implements 'file receive' process-based permission checking for
sockets, rather than just depending on inode checks.
- Misc enhancments for TPM & TPM2.
- Cleanups and bugfixes for SELinux, Keys, and IMA.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (41 commits)
selinux: Inode label revalidation performance fix
KEYS: refcount bug fix
ima: ima_write_policy() limit locking
IMA: policy can be updated zero times
selinux: rate-limit netlink message warnings in selinux_nlmsg_perm()
selinux: export validatetrans decisions
gfs2: Invalid security labels of inodes when they go invalid
selinux: Revalidate invalid inode security labels
security: Add hook to invalidate inode security labels
selinux: Add accessor functions for inode->i_security
security: Make inode argument of inode_getsecid non-const
security: Make inode argument of inode_getsecurity non-const
selinux: Remove unused variable in selinux_inode_init_security
keys, trusted: seal with a TPM2 authorization policy
keys, trusted: select hash algorithm for TPM2 chips
keys, trusted: fix: *do not* allow duplicate key options
tpm_ibmvtpm: properly handle interrupted packet receptions
tpm_tis: Tighten IRQ auto-probing
tpm_tis: Refactor the interrupt setup
tpm_tis: Get rid of the duplicate IRQ probing code
...
Mark those kmem allocations that are known to be easily triggered from
userspace as __GFP_ACCOUNT/SLAB_ACCOUNT, which makes them accounted to
memcg. For the list, see below:
- threadinfo
- task_struct
- task_delay_info
- pid
- cred
- mm_struct
- vm_area_struct and vm_region (nommu)
- anon_vma and anon_vma_chain
- signal_struct
- sighand_struct
- fs_struct
- files_struct
- fdtable and fdtable->full_fds_bits
- dentry and external_name
- inode for all filesystems. This is the most tedious part, because
most filesystems overwrite the alloc_inode method.
The list is far from complete, so feel free to add more objects.
Nevertheless, it should be close to "account everything" approach and
keep most workloads within bounds. Malevolent users will be able to
breach the limit, but this was possible even with the former "account
everything" approach (simply because it did not account everything in
fact).
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch fixes an error condition in which an inode is partially
created in gfs2_create_inode() but then some error is discovered,
which causes it to fail and call iput() before the iopen glock is
created or held. In that case, gfs2_delete_inode would try to
unlock an iopen glock that doesn't yet exist. Therefore, we test
its holder (which must exist) for the HIF_HOLDER bit before trying
to dq it.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Here is a list of patches we've accumulated for GFS2 for the current upstream
merge window. Last window's set was short, but I warned that this one would
be bigger, and so it is. We've got 19 patches:
- A patch from Abhi Das to propagate the GFS2_DIF_SYSTEM bit so that newly
added journals don't get flagged, deleted, and recreated by fsck.gfs2.
- Two patches from Andreas Gruenbacher to improve GFS2 performance where
extended attributes are involved.
- A patch from Andy Price to fix a suspicious rcu dereference error.
- Two patches from Ben Marzinski that rework how GFS2's NFS cookies are
managed. This fixes readdir problems with nfs-over-gfs2.
- A patch from Ben Marzinski that fixes a race in unmounting GFS2.
- A set of four patches from me to move the resource group reservations
inside the gfs2 inode to improve performance and fix a bug whereby
get_write_access improperly prevented some operations like chown.
- A patch from me to spinlock-protect the setting of system statfs file data.
This was causing small discrepancies between df and du.
- A patch from me to reintroduce a timeout while clearing glocks which was
accidentally dropped some time ago.
- A patch from me to wait for iopen glock dequeues in order to improve
deleting of files that were unlinked from a different cluster node.
- A patch from me to ensure metadata address spaces get truncated when an
inode is evicted.
- A patch from me to fix a bug in which a memory leak could occur in some
error cases when inodes were trying to be created.
- A patch to consistently use iopen glocks to transition from the unlinked
state to the deleted state.
- A patch to fix a glock reference count error when inode creation fails.
- A patch from Junxiao Bi to fix an flock panic.
- A patch from Markus Elfring that removes an unnecessary if.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWlUOCAAoJENeLYdPf93o78/IH/0PfoQtQnYQpvbTPgaFICEUI
rx+uLqPxpJgjJMsbIy+VA/bhZsbuENDbor99Cs6GiTLy3Q/4TKNY9NxDN+aO8o+Q
qrp3ZANkyTGaneCzrXzfgmOxe1G8xRQ7pboRUEt2yPlGK1oLax+PR4uPb+IuJ5Wa
QvSwnZj+9K2LkMQkKPyxoltjZiZLywvNB5dx0F35+dvriQxHXfJ1Naek6gs140MB
SfG4/Zi8dfGOJQjSQTUENatFhyFB0V7CbDPFuBVzTGD8IS4ASgqIBMFjO0VBHkP4
gt4zb0BJAn0aQcbxIaDtsuEffpn+5zdK/Onq5g4Fr9ZJv3fkVpVcOgYui/rkDD0=
=28ev
-----END PGP SIGNATURE-----
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Bob Peterson:
"Here is a list of patches we've accumulated for GFS2 for the current
upstream merge window. Last window's set was short, but I warned that
this one would be bigger, and so it is. We've got 19 patches:
- A patch from Abhi Das to propagate the GFS2_DIF_SYSTEM bit so that
newly added journals don't get flagged, deleted, and recreated by
fsck.gfs2.
- Two patches from Andreas Gruenbacher to improve GFS2 performance
where extended attributes are involved.
- A patch from Andy Price to fix a suspicious rcu dereference error.
- Two patches from Ben Marzinski that rework how GFS2's NFS cookies
are managed. This fixes readdir problems with nfs-over-gfs2.
- A patch from Ben Marzinski that fixes a race in unmounting GFS2.
- A set of four patches from me to move the resource group
reservations inside the gfs2 inode to improve performance and fix a
bug whereby get_write_access improperly prevented some operations
like chown.
- A patch from me to spinlock-protect the setting of system statfs
file data. This was causing small discrepancies between df and du.
- A patch from me to reintroduce a timeout while clearing glocks
which was accidentally dropped some time ago.
- A patch from me to wait for iopen glock dequeues in order to
improve deleting of files that were unlinked from a different
cluster node.
- A patch from me to ensure metadata address spaces get truncated
when an inode is evicted.
- A patch from me to fix a bug in which a memory leak could occur in
some error cases when inodes were trying to be created.
- A patch to consistently use iopen glocks to transition from the
unlinked state to the deleted state.
- A patch to fix a glock reference count error when inode creation
fails.
- A patch from Junxiao Bi to fix an flock panic.
- A patch from Markus Elfring that removes an unnecessary if"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: fix flock panic issue
GFS2: Don't do glock put on when inode creation fails
GFS2: Always use iopen glock for gl_deletes
GFS2: Release iopen glock in gfs2_create_inode error cases
GFS2: Truncate address space mapping when deleting an inode
GFS2: Wait for iopen glock dequeues
gfs2: clear journal live bit in gfs2_log_flush
gfs2: change gfs2 readdir cookie
gfs2: keep offset when splitting dir leaf blocks
GFS2: Reintroduce a timeout in function gfs2_gl_hash_clear
GFS2: Update master statfs buffer with sd_statfs_spin locked
GFS2: Reduce size of incore inode
GFS2: Make rgrp reservations part of the gfs2_inode structure
GFS2: Extract quota data from reservations structure (revert 5407e24)
gfs2: Extended attribute readahead optimization
gfs2: Extended attribute readahead
GFS2: Use rht_for_each_entry_rcu in glock_hash_walk
GFS2: Delete an unnecessary check before the function call "iput"
gfs2: Automatically set GFS2_DIF_SYSTEM flag on system files
