When receiving a DATA_FIN MPTCP option on a TCP FIN packet, the DATA_FIN
information would be stored but the MPTCP worker did not get
scheduled. In turn, the MPTCP socket state would remain in
TCP_ESTABLISHED and no blocked operations would be awakened.
TCP FIN packets are seen by the MPTCP socket when moving skbs out of the
subflow receive queues, so schedule the MPTCP worker when a skb with
DATA_FIN but no data payload is moved from a subflow queue. Other cases
(DATA_FIN on a bare TCP ACK or on a packet with data payload) are
already handled.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/84
Fixes: 43b54c6ee3 ("mptcp: Use full MPTCP-level disconnect state machine")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch set the init remote_id to zero, otherwise it will be a random
number.
Then it added the missing subflow's remote_id setting code both in
__mptcp_subflow_connect and in subflow_ulp_clone.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Fixes: ec3edaa7ca ("mptcp: Add handling of outgoing MP_JOIN requests")
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
In mptcp_pm_nl_get_local_id, skc_local is the same as msk_local, so it
always return 0. Thus every subflow's local_id is 0. It's incorrect.
This patch fixed this issue.
Also, we need to ignore the zero address here, like 0.0.0.0 in IPv4. When
we use the zero address as a local address, it means that we can use any
one of the local addresses. The zero address is not a new address, we don't
need to add it to PM, so this patch added a new function address_zero to
check whether an address is the zero address, if it is, we ignore this
address.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi
Kivilinna.
2) Fix loss of RTT samples in rxrpc, from David Howells.
3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu.
4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka.
5) We disable BH for too lokng in sctp_get_port_local(), add a
cond_resched() here as well, from Xin Long.
6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu.
7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from
Yonghong Song.
8) Missing of_node_put() in mt7530 DSA driver, from Sumera
Priyadarsini.
9) Fix crash in bnxt_fw_reset_task(), from Michael Chan.
10) Fix geneve tunnel checksumming bug in hns3, from Yi Li.
11) Memory leak in rxkad_verify_response, from Dinghao Liu.
12) In tipc, don't use smp_processor_id() in preemptible context. From
Tuong Lien.
13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu.
14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter.
15) Fix ABI mismatch between driver and firmware in nfp, from Louis
Peens.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits)
net/smc: fix sock refcounting in case of termination
net/smc: reset sndbuf_desc if freed
net/smc: set rx_off for SMCR explicitly
net/smc: fix toleration of fake add_link messages
tg3: Fix soft lockup when tg3_reset_task() fails.
doc: net: dsa: Fix typo in config code sample
net: dp83867: Fix WoL SecureOn password
nfp: flower: fix ABI mismatch between driver and firmware
tipc: fix shutdown() of connectionless socket
ipv6: Fix sysctl max for fib_multipath_hash_policy
drivers/net/wan/hdlc: Change the default of hard_header_len to 0
net: gemini: Fix another missing clk_disable_unprepare() in probe
net: bcmgenet: fix mask check in bcmgenet_validate_flow()
amd-xgbe: Add support for new port mode
net: usb: dm9601: Add USB ID of Keenetic Plus DSL
vhost: fix typo in error message
net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init()
pktgen: fix error message with wrong function name
net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode
cxgb4: fix thermal zone device registration
...
After subflow lock is dropped, more wmem might have been made available.
This fixes a deadlock in mptcp_connect.sh 'mmap' mode: wmem is exhausted.
But as the mptcp socket holds on to already-acked data (for retransmit)
no wakeup will occur.
Using 'goto restart' calls mptcp_clean_una(sk) which will free pages
that have been acked completely in the mean time.
Fixes: fb529e62d3 ("mptcp: break and restart in case mptcp sndbuf is full")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fix wasn't correct: When this function is invoked from the
retransmission worker, the iterator contains garbage and resetting
it causes a crash.
As the work queue should not be performance critical also zero the
msghdr struct.
Fixes: 3575938313 "(mptcp: sendmsg: reset iter on error)"
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Once we've copied data from the iterator we need to revert in case we
end up not sending any data.
This bug doesn't trigger with normal 'poll' based tests, because
we only feed a small chunk of data to kernel after poll indicated
POLLOUT. With blocking IO and large writes this triggers. Receiver
ends up with less data than it should get.
Fixes: 72511aab95 ("mptcp: avoid blocking in tcp_sendpages")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With commit b93df08ccd ("mptcp: explicitly track the fully
established status"), the status of unaccepted mptcp closed in
mptcp_sock_destruct() changes from TCP_SYN_RECV to TCP_ESTABLISHED.
As a result mptcp_sock_destruct() does not perform the proper
cleanup and inet_sock_destruct() will later emit a warn.
Address the issue updating the condition tested in mptcp_sock_destruct().
Also update the related comment.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/66
Reported-and-tested-by: Christoph Paasch <cpaasch@apple.com>
Fixes: b93df08ccd ("mptcp: explicitly track the fully established status")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking updates from David Miller:
1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.
2) Support UDP segmentation in code TSO code, from Eric Dumazet.
3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.
4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.
5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.
6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.
7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.
8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.
9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.
10) Switch qca8k driver over to phylink, from Jonathan McDowell.
11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.
12) Several conversions over to generic power management, from Vaibhav
Gupta.
13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.
14) Various https url conversions, from Alexander A. Klimov.
15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.
16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.
17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.
18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.
19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.
20) XDP support for xen-netfront, from Denis Kirjanov.
21) Support receive buffer autotuning in MPTCP, from Florian Westphal.
22) Support EF100 chip in sfc driver, from Edward Cree.
23) Add XDP support to mvpp2 driver, from Matteo Croce.
24) Support MPTCP in sock_diag, from Paolo Abeni.
25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.
26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.
27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.
28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.
29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.
30) Add rfc4884 support to icmp code, from Willem de Bruijn.
31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.
32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.
33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.
34) Support TCP syncookies in MPTCP, from Flowian Westphal.
35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...
In case of memory pressure, mptcp_sendmsg() may call
sk_stream_wait_memory() after succesfully xmitting some
bytes. If the latter fails we currently return to the
user-space the error code, ignoring the succeful xmit.
Address the issue always checking for the xmitted bytes
before mptcp_sendmsg() completes.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use mptcp_for_each_subflow in mptcp_stream_accept instead of
open-coding.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull crypto updates from Herbert Xu:
"API:
- Add support for allocating transforms on a specific NUMA Node
- Introduce the flag CRYPTO_ALG_ALLOCATES_MEMORY for storage users
Algorithms:
- Drop PMULL based ghash on arm64
- Fixes for building with clang on x86
- Add sha256 helper that does the digest in one go
- Add SP800-56A rev 3 validation checks to dh
Drivers:
- Permit users to specify NUMA node in hisilicon/zip
- Add support for i.MX6 in imx-rngc
- Add sa2ul crypto driver
- Add BA431 hwrng driver
- Add Ingenic JZ4780 and X1000 hwrng driver
- Spread IRQ affinity in inside-secure and marvell/cesa"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (157 commits)
crypto: sa2ul - Fix inconsistent IS_ERR and PTR_ERR
hwrng: core - remove redundant initialization of variable ret
crypto: x86/curve25519 - Remove unused carry variables
crypto: ingenic - Add hardware RNG for Ingenic JZ4780 and X1000
dt-bindings: RNG: Add Ingenic RNG bindings.
crypto: caam/qi2 - add module alias
crypto: caam - add more RNG hw error codes
crypto: caam/jr - remove incorrect reference to caam_jr_register()
crypto: caam - silence .setkey in case of bad key length
crypto: caam/qi2 - create ahash shared descriptors only once
crypto: caam/qi2 - fix error reporting for caam_hash_alloc
crypto: caam - remove deadcode on 32-bit platforms
crypto: ccp - use generic power management
crypto: xts - Replace memcpy() invocation with simple assignment
crypto: marvell/cesa - irq balance
crypto: inside-secure - irq balance
crypto: ecc - SP800-56A rev 3 local public key validation
crypto: dh - SP800-56A rev 3 local public key validation
crypto: dh - check validity of Z before export
lib/mpi: Add mpi_sub_ui()
...
kernel test robot says:
net/mptcp/syncookies.c: In function 'mptcp_join_cookie_init':
include/linux/kernel.h:47:38: warning: division by zero [-Wdiv-by-zero]
#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]) + __must_be_array(arr))
I forgot that spinock_t size is 0 on UP, so ARRAY_SIZE cannot be used.
Fixes: 9466a1cceb ("mptcp: enable JOIN requests even if cookies are in use")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
JOIN requests do not work in syncookie mode -- for HMAC validation, the
peers nonce and the mptcp token (to obtain the desired connection socket
the join is for) are required, but this information is only present in the
initial syn.
So either we need to drop all JOIN requests once a listening socket enters
syncookie mode, or we need to store enough state to reconstruct the request
socket later.
This adds a state table (1024 entries) to store the data present in the
MP_JOIN syn request and the random nonce used for the cookie syn/ack.
When a MP_JOIN ACK passed cookie validation, the table is consulted
to rebuild the request socket from it.
An alternate approach would be to "cancel" syn-cookie mode and force
MP_JOIN to always use a syn queue entry.
However, doing so brings the backlog over the configured queue limit.
v2: use req->syncookie, not (removed) want_cookie arg
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Will be used to initialize the mptcp request socket when a MP_CAPABLE
request was handled in syncookie mode, i.e. when a TCP ACK containing a
MP_CAPABLE option is a valid syncookie value.
Normally (non-cookie case), MPTCP will generate a unique 32 bit connection
ID and stores it in the MPTCP token storage to be able to retrieve the
mptcp socket for subflow joining.
In syncookie case, we do not want to store any state, so just generate the
unique ID and use it in the reply.
This means there is a small window where another connection could generate
the same token.
When Cookie ACK comes back, we check that the token has not been registered
in the mean time. If it was, the connection needs to fall back to TCP.
Changes in v2:
- use req->syncookie instead of passing 'want_cookie' arg to ->init_req()
(Eric Dumazet)
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syncookie code path needs to create an mptcp request sock.
Prepare for this and add mptcp prefix plus needed export of ops struct.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When syncookie support is added, we will need to add a variant of
subflow_init_req() helper. It will do almost same thing except
that it will not compute/add a token to the mptcp token tree.
To avoid excess copy&paste, this commit splits away part of the
code into a new helper, __subflow_init_req, that can then be re-used
from the 'no insert' function added in a followup change.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Once syncookie support is added, no state will be stored anymore when the
syn/ack is generated in syncookie mode.
When the ACK comes back, the generated key will be taken from the TCP ACK,
the token is re-generated and inserted into the token tree.
This means we can't retry with a new key when the token is already taken
in the syncookie case.
Therefore, move the retry logic to the caller to prepare for syncookie
support in mptcp.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MPTCP socket's write_seq member can be read without the msk lock
held, so use WRITE_ONCE() to store it.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MPTCP socket's write_seq member should be read with READ_ONCE() when
the msk lock is not held.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bare TCP ack skbs are freed right after MPTCP sees them, so the work to
allocate, zero, and populate the MPTCP skb extension is wasted. Detect
these skbs and do not add skb extensions to them.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MPTCP state machine handles disconnections on non-fallback connections,
but the mptcp_sock still needs to get notified when fallback subflows
disconnect.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFC 8684 appendix D describes the connection state machine for
MPTCP. This patch implements the DATA_FIN / DATA_ACK exchanges and
MPTCP-level socket state changes described in that appendix, rather than
simply sending DATA_FIN along with TCP FIN when disconnecting subflows.
DATA_FIN is now sent and acknowledged before shutting down the
subflows. Received DATA_FIN information (if not part of a data packet)
is written to the MPTCP socket when the incoming DSS option is parsed by
the subflow, and the MPTCP worker is scheduled to process the
flag. DATA_FIN received as part of a full DSS mapping will be handled
when the mapping is processed.
The DATA_FIN is acknowledged by the worker if the reader is caught
up. If there is still data to be moved to the MPTCP-level queue, ack_seq
will be incremented to account for the DATA_FIN when it reaches the end
of the stream and a DATA_ACK will be sent to the peer.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After DATA_FIN has been sent, the peer will acknowledge it. An ack of
the relevant MPTCP-level sequence number will update the MPTCP
connection state appropriately.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This will be used to transition to the appropriate state on close and
determine if a DATA_FIN needs to be sent for that state transition.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Incoming DATA_FIN headers need to propagate the presence of the DATA_FIN
bit and the associated sequence number to the MPTCP layer, even when
arriving on a bare ACK that does not get added to the receive queue. Add
structure members to store the DATA_FIN information and helpers to set
and check those values.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since DATA_FIN information is the same for every subflow, store it only
in the mptcp_sock.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mptcp_close() acquires the msk lock, so it clearly should not be held
before the function is called.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A MPTCP socket where sending has been shut down should not attempt to
send additional data, since DATA_FIN has already been sent.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFC 8684-compliant DATA_FIN needs to be sent and ack'd before subflows
are closed with TCP FIN, so write DATA_FIN DSS headers whenever their
transmission has been enabled by the MPTCP connection-level socket.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unblocking sockets used for outgoing connections were not containing
inet info about the initial connection due to a typo there: the value of
"err" variable is negative in the kernelspace.
This fixes the creation of additional subflows where the remote port has
to be reused if the other host didn't announce another one. This also
fixes inet_diag showing blank info about MPTCP sockets from unblocking
sockets doing a connect().
Fixes: 41be81a8d3 ("mptcp: fix unblocking connect()")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rework the remaining setsockopt code to pass a sockptr_t instead of a
plain user pointer. This removes the last remaining set_fs(KERNEL_DS)
outside of architecture specific code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154]
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
So that we can easily perform some basic PM-related
adimission checks before creating the child socket.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_send_active_reset() is more prone to transient errors
(memory allocation or xmit queue full): in stress conditions
the kernel may drop the egress packet, and the client will be
stuck.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When syncookie are in use, the TCP stack may feed into
subflow_syn_recv_sock() plain TCP request sockets. We can't
access mptcp_subflow_request_sock-specific fields on such
sockets. Explicitly check the rsk ops to do safe accesses.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mentioned function has several unneeded branches,
handle each case - MP_CAPABLE, MP_JOIN, fallback -
under a single conditional and drop quite a bit of
duplicate code.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently accepted msk sockets become established only after
accept() returns the new sk to user-space.
As MP_JOIN request are refused as per RFC spec on non fully
established socket, the above causes mp_join self-tests
instabilities.
This change lets the msk entering the established status
as soon as it receives the 3rd ack and propagates the first
subflow fully established status on the msk socket.
Finally we can change the subflow acceptance condition to
take in account both the sock state and the msk fully
established flag.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the unlikely event of a failure at connect time,
we currently clear the request_mptcp flag - so that
the MPC handshake is not started at all, but the msk
is not explicitly marked as fallback.
This would lead to later insertion of wrong DSS options
in the xmitted packets, in violation of RFC specs and
possibly fooling the peer.
Fixes: e1ff9e82e2 ("net: mptcp: improve fallback to TCP")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When updating a partially acked data fragment, we
actually corrupt it. This is irrelevant till we send
data on a single subflow, as retransmitted data, if
any are discarded by the peer as duplicate, but it
will cause data corruption as soon as we will start
creating non backup subflows.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we do not init the subflow write sequence for
MP_JOIN subflows. This will cause bad mapping being
generated as soon as we will use non backup subflow.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Otherwise the 'chain_len' filed will carry random values,
some token creation calls will fail due to excessive chain
length, causing unexpected fallback to TCP.
Fixes: 2c5ebd001d ("mptcp: refactor token container")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the compat handling to sock_common_{get,set}sockopt instead,
keyed of in_compat_syscall(). This allow to remove the now unused
->compat_{get,set}sockopt methods from struct proto_ops.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
since commit d47a721520 ("mptcp: fix race in subflow_data_ready()"), it
is possible to observe a regression in MP_JOIN kselftests. For sockets in
TCP_CLOSE state, it's not sufficient to just wake up the main socket: we
also need to ensure that received data are made available to the reader.
Silence the WARN_ON_ONCE() in these cases: it preserves the syzkaller fix
and restores kselftests when they are ran as follows:
# while true; do
> make KBUILD_OUTPUT=/tmp/kselftest TARGETS=net/mptcp kselftest
> done
Reported-by: Florian Westphal <fw@strlen.de>
Fixes: d47a721520 ("mptcp: fix race in subflow_data_ready()")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/47
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that there's a function that calculates the SHA-256 digest of a
buffer in one step, use it instead of sha256_init() + sha256_update() +
sha256_final().
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Cc: mptcp@lists.01.org
Cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
Cc: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
