Calling kthread_run with a single name parameter causes it to be handled
as a format string. Many callers are passing potentially dynamic string
content, so use "%s" in those cases to avoid any potential accidents.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stacking drivers may append bvecs to existing bio's, resulting
in non-zero bi_idx conditions. This patch counts the loops of
bio_for_each_segment() rather than inheriting the bi_idx value
to pass as a segment count to the hardware submission routine.
Signed-off-by: Sam Bradshaw <sbradshaw@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
An open file-handle to one or more of the driver exported debugfs
nodes causes raciness in recursive removal during module unload;
sometimes a stale parent dentry is dereferenced when more than 1
pci device is present.
Signed-off-by: Sam Bradshaw <sbradshaw@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull block driver updates from Jens Axboe:
"It might look big in volume, but when categorized, not a lot of
drivers are touched. The pull request contains:
- mtip32xx fixes from Micron.
- A slew of drbd updates, this time in a nicer series.
- bcache, a flash/ssd caching framework from Kent.
- Fixes for cciss"
* 'for-3.10/drivers' of git://git.kernel.dk/linux-block: (66 commits)
bcache: Use bd_link_disk_holder()
bcache: Allocator cleanup/fixes
cciss: bug fix to prevent cciss from loading in kdump crash kernel
cciss: add cciss_allow_hpsa module parameter
drivers/block/mg_disk.c: add CONFIG_PM_SLEEP to suspend/resume functions
mtip32xx: Workaround for unaligned writes
bcache: Make sure blocksize isn't smaller than device blocksize
bcache: Fix merge_bvec_fn usage for when it modifies the bvm
bcache: Correctly check against BIO_MAX_PAGES
bcache: Hack around stuff that clones up to bi_max_vecs
bcache: Set ra_pages based on backing device's ra_pages
bcache: Take data offset from the bdev superblock.
mtip32xx: mtip32xx: Disable TRIM support
mtip32xx: fix a smatch warning
bcache: Disable broken btree fuzz tester
bcache: Fix a format string overflow
bcache: Fix a minor memory leak on device teardown
bcache: Documentation updates
bcache: Use WARN_ONCE() instead of __WARN()
bcache: Add missing #include <linux/prefetch.h>
...
Workaround for handling unaligned writes: limit number of outstanding
unaligned writes
Signed-off-by: Sam Bradshaw <sbradshaw@micron.com>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Temporarily disabling TRIM support until TRIM related issues
are addressed in the firmware.
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reported smatch warning:
drivers/block/mtip32xx/mtip32xx.c:4163 mtip_block_shutdown() warn: variable dereferenced before check 'dd->disk' (see line 4159)
dd->disk->disk_name accessed before the check if dd->disk is NULL. Fixed this
and access of dd->queue/dd->disk->queue.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dan reports:
New smatch warnings:
drivers/block/mtip32xx/mtip32xx.c:2728 show_device_status() warn: variable dereferenced before check 'dd' (see line 2727)
drivers/block/mtip32xx/mtip32xx.c:2758 show_device_status() warn: variable dereferenced before check 'dd' (see line 2757)
which are checking if dd == NULL, in a list_for_each_entry() type loop.
Get rid of the check, dd can never be NULL here.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds a new debugfs entry 'device_status' in
/sys/kernel/debug/rssd. The value of this entry shows
devices online and those in the process of removing.
Signed-off-by: Sam Bradshaw <sbradshaw@micron.com>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix to return 0 from pci probe in case of rebuild. If not, pci consider
probe has failed, and crash during rmmod.
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To recover from command timeouts, reset the device. In addition
to that improved timeout handling of PIO commands.
Signed-off-by: Sam Bradshaw <sbradshaw@micron.com>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Konrad writes:
Please git pull the following branch:
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git stable/for-jens-3.9
which has bug-fixes that did not make it in v3.8. They all are marked as
material for the stable tree as well. There are two bug-fixes for
the code that has been in there for some time (that is the Jan's fix
and one of mine). And there are two bug-fixes for the persistent grant
feature that debuted in v3.8 for xen blk[back|front]end.
Hi Asai,
FYI, there are new sparse warnings show up in
tree: git://git.kernel.dk/linux-block.git for-3.9/drivers
head: 3d6a87430e
commit: 152834694d [2/3] mtip32xx: add trim support
>> drivers/block/mtip32xx/mtip32xx.c:1726:5: sparse: symbol 'mtip_send_trim' was not declared. Should it be static?
drivers/block/mtip32xx/mtip32xx.c:3348:17: sparse: cast to restricted __le32
drivers/block/mtip32xx/mtip32xx.c:4125:1: sparse: symbol 'mtip_workq_sdbf0' was not declared. Should it be static?
drivers/block/mtip32xx/mtip32xx.c:4126:1: sparse: symbol 'mtip_workq_sdbf1' was not declared. Should it be static?
drivers/block/mtip32xx/mtip32xx.c:4127:1: sparse: symbol 'mtip_workq_sdbf2' was not declared. Should it be static?
drivers/block/mtip32xx/mtip32xx.c:4128:1: sparse: symbol 'mtip_workq_sdbf3' was not declared. Should it be static?
drivers/block/mtip32xx/mtip32xx.c:4129:1: sparse: symbol 'mtip_workq_sdbf4' was not declared. Should it be static?
drivers/block/mtip32xx/mtip32xx.c:4130:1: sparse: symbol 'mtip_workq_sdbf5' was not declared. Should it be static?
drivers/block/mtip32xx/mtip32xx.c:4131:1: sparse: symbol 'mtip_workq_sdbf6' was not declared. Should it be static?
drivers/block/mtip32xx/mtip32xx.c:4132:1: sparse: symbol 'mtip_workq_sdbf7' was not declared. Should it be static?
drivers/block/mtip32xx/mtip32xx.c: In function 'mtip_hw_read_flags':
drivers/block/mtip32xx/mtip32xx.c:2804:1: warning: the frame size of 1036 bytes is larger than 1024 bytes [-Wframe-larger-than=]
drivers/block/mtip32xx/mtip32xx.c: In function 'mtip_hw_read_registers':
drivers/block/mtip32xx/mtip32xx.c:2781:1: warning: the frame size of 1044 bytes is larger than 1024 bytes [-Wframe-larger-than=]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hi Asai,
FYI, there are new sparse warnings show up in
tree: git://git.kernel.dk/linux-block.git for-3.9/drivers
head: 3d6a87430e
commit: 16c906e51c [1/3] mtip32xx: Add workqueue and NUMA support
drivers/block/mtip32xx/mtip32xx.c:3267:17: sparse: cast to restricted __le32
>> drivers/block/mtip32xx/mtip32xx.c:4029:1: sparse: symbol 'mtip_workq_sdbf0' was not declared. Should it be static?
>> drivers/block/mtip32xx/mtip32xx.c:4030:1: sparse: symbol 'mtip_workq_sdbf1' was not declared. Should it be static?
>> drivers/block/mtip32xx/mtip32xx.c:4031:1: sparse: symbol 'mtip_workq_sdbf2' was not declared. Should it be static?
>> drivers/block/mtip32xx/mtip32xx.c:4032:1: sparse: symbol 'mtip_workq_sdbf3' was not declared. Should it be static?
>> drivers/block/mtip32xx/mtip32xx.c:4033:1: sparse: symbol 'mtip_workq_sdbf4' was not declared. Should it be static?
>> drivers/block/mtip32xx/mtip32xx.c:4034:1: sparse: symbol 'mtip_workq_sdbf5' was not declared. Should it be static?
>> drivers/block/mtip32xx/mtip32xx.c:4035:1: sparse: symbol 'mtip_workq_sdbf6' was not declared. Should it be static?
>> drivers/block/mtip32xx/mtip32xx.c:4036:1: sparse: symbol 'mtip_workq_sdbf7' was not declared. Should it be static?
drivers/block/mtip32xx/mtip32xx.c: In function 'mtip_hw_read_flags':
drivers/block/mtip32xx/mtip32xx.c:2723:1: warning: the frame size of 1036 bytes is larger than 1024 bytes [-Wframe-larger-than=]
drivers/block/mtip32xx/mtip32xx.c: In function 'mtip_hw_read_registers':
drivers/block/mtip32xx/mtip32xx.c:2700:1: warning: the frame size of 1044 bytes is larger than 1024 bytes [-Wframe-larger-than=]
Please consider folding the below diff :-)
Signed-off-by: Jens Axboe <axboe@kernel.dk>
TRIM support added through vendor unique command.
Signed-off-by: Sam Bradshaw < sbradshaw@micron.com>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch contains
* parallel command completion using workers
* bind the workers to the chosen numa node
* bind isr to the chosen numa node
* allocating memory in the chosen numa node
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Sam Bradshaw <sbradshaw@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When rebuild is in progress, disk->queue is yet to be created. Surprise
removing the device will call remove()-> del_gendisk(). del_gendisk()
expect disk->queue be not NULL. Fix is to call put_disk() when disk_queue
is NULL.
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If an I/O command times out when a PIO command is active,
MTIP_PF_EH_ACTIVE_BIT is not cleared. This results in I/O
hang in the driver. Fix is to clear this bit.
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The dereference to port should be moved below the NULL test.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we're building a 32-bit kernel and CONFIG_LBADF isn't set,
sector_t is 32-bits wide. The shifts by 32 and 40 are thus
larger than we support.
Cast the sector offset to a u64 to avoid these warnings.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Earlier lba address was assigned directly to lba_low and lba_low_ex,
which would result in a different number (bytes reversed) in
big-endian systems. Now assigning lba address byte-by-byte to fis.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Selvan Mani <smani@micron.com>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The mtip driver lifted this code from elsewhere and then added a special
handling check for SEC_ERASE_UNIT. If the caller tries to do a security
erase but passes no output data for the command then outbuf is not
allocated and the driver duly explodes.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Selvan Mani <smani@micron.com>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Added appropriate timeout value for secure erase based on identify device data
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Selvan Mani <smani@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Current user_buffer check is incorrect and causes hdparm to fail
# hdparm -I /dev/rssda
HDIO_DRIVE_CMD(identify) failed: Input/output error
/dev/rssda:
Patching linux-3.6-rc5 hdparm works as expected
# hdparm -I /dev/rssda
/dev/rssda:
ATA device, with non-removable media
Model Number: DELL_P320h-MTFDGAL350SAH
Serial Number: 00000000121302025F01
Firmware Revision: B1442808
<snip>
Reported-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Removed the dead code in mtip_hw_read_registers() and mtip_hw_read_flags().
Reported-by: Coverity
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Selvan Mani <smani@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Changed printk to be compliant with latest style changes
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Selvan Mani <smani@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Proper reporting of write protect status on big-endian
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Selvan Mani <smani@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Increased timeout for standby command to work with larger capacity drives
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Selvan Mani <smani@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Return error for NCQ commands when the drive is in security locked state
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Selvan Mani <smani@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On module load, creates a debugfs parent 'rssd' in debugfs root. Then for each
device, create a new node with corresponding disk name. Under the new node, two
entries 'registers' and 'flags' are created.
NOTE: These entries were removed from sysfs in the previous patch
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch removes entries 'registers' and 'flags' from sysfs. Updated ABI file
to reflect this change.
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Formatted the output of 'registers' entry
* Added "Commands in Q' to output of 'registers' entry
* Added a new entry 'flags'
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When checking for command completions if the register value is zero, proceed
to next register.
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix to support more than one sector in exec_drive_command().
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
'cmd_issue_lock' is for only acquiring a free slot, and it is not used
in interrupt context. So replaced irq version with non-irq version of spinlock.
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set the following block queue boundary variables
* max_hw_sectors
* max_segment_size
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Removed setting of q->nr_requests.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a PIO (IOCTL/internal) command resulted in TFE, signal the wait event or break out of polling.
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For the ioctl command HDIO_GET_IDENTITY, return the stored copy of IDENTIFY
DATA instead of sending the command to the device - similar to libata.
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This change sets custom timeouts depending on PIO command.
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix clearing an incorrect register in mtip_init_port
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Release the semaphore in an error path in mtip_hw_get_scatterlist(). This
fixes the smatch warning inconsistent returns.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dump tagmap on failure, instead of individual tags.
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* If a ncq command time out and a non-ncq command is active, skip restart port
* Queue(pause) ncq commands during operations spanning more than one non-ncq commands - secure erase, download microcode
* When a non-ncq command is active, allow incoming non-ncq commands to wait instead of failing back
* Changed timeout for download microcode and smart commands
* If the device in write protect mode, fail all writes (do not send to device)
* Set maximum retries to 2
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Shortened macros used to represent mtip_port->flags and dd->dd_flag
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Handle the interrupt completion of polled internal commands
* Do not check remove pending flag for standby command
* On rebuild failure,
- set corresponding bit dd_flag
- do not send standby command
* Free ida index in remove path
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Add support for detecting the following device status
- write protect
- over temp (thermal shutdown)
* Add new sysfs entry 'status', possible values - online, write_protect, thermal_shutdown
* Add new file 'sysfs-block-rssd' to document ABI (Reported-by: Greg Kroah-Hartman)
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Moved setting completion time into mtip_issue_ncq_command()
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Merged the following flags into one variable 'dd_flag':
* drv_cleanup_done
* resumeflag
* Added the following flags into 'dd_flag'
* remove pending
* init done
* Removed 'ftlrebuildflag' (similar flag is already part of mti_port->flags)
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
