Ensure that the realtime bitmap file is backed entirely by written
extents. No holes, no unwritten blocks, etc.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
The data fork scrubber calls filemap_write_and_wait to flush dirty pages
and delalloc reservations out to disk prior to checking the data fork's
extent mappings. Unfortunately, this means that scrub can consume the
EIO/ENOSPC errors that would otherwise have stayed around in the address
space until (we hope) the writer application calls fsync to persist data
and collect errors. The end result is that programs that wrote to a
file might never see the error code and proceed as if nothing were
wrong.
xfs_scrub is not in a position to notify file writers about the
writeback failure, and it's only here to check metadata, not file
contents. Therefore, if writeback fails, we should stuff the error code
back into the address space so that an fsync by the writer application
can pick that up.
Fixes: 99d9d8d05d ("xfs: scrub inode block mappings")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Both the data and attr fork have a format that is stored in the legacy
idinode. Move it into the xfs_ifork structure instead, where it uses
up padding.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There are there are three extents counters per inode, one for each of
the forks. Two are in the legacy icdinode and one is directly in
struct xfs_inode. Switch to a single counter in the xfs_ifork structure
where it uses up padding at the end of the structure. This simplifies
various bits of code that just wants the number of extents counter and
can now directly dereference it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
XFS_IFORK_Q is supposed to be a predicate, not a function returning a
value. Its usage is in xchk_bmap_check_rmaps is incorrect, but that
function only cares about whether or not the "size" of the data is zero
or not. Convert that logic to use a proper boolean, and teach the
caller to skip the call entirely if the end result would be that we'd do
nothing anyway. This avoids a crash later in this series.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[hch: generalized the NULL ifor check]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
iget_flags is unused in xfs_imap_to_bp(). Remove the parameter and
fix up the callers.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
I noticed that fsfreeze can take a very long time to freeze an XFS if
there happens to be a GETFSMAP caller running in the background. I also
happened to notice the following in dmesg:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 43492 at fs/xfs/xfs_super.c:853 xfs_quiesce_attr+0x83/0x90 [xfs]
Modules linked in: xfs libcrc32c ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 ip_set_hash_ip ip_set_hash_net xt_tcpudp xt_set ip_set_hash_mac ip_set nfnetlink ip6table_filter ip6_tables bfq iptable_filter sch_fq_codel ip_tables x_tables nfsv4 af_packet [last unloaded: xfs]
CPU: 2 PID: 43492 Comm: xfs_io Not tainted 5.6.0-rc4-djw #rc4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:xfs_quiesce_attr+0x83/0x90 [xfs]
Code: 7c 07 00 00 85 c0 75 22 48 89 df 5b e9 96 c1 00 00 48 c7 c6 b0 2d 38 a0 48 89 df e8 57 64 ff ff 8b 83 7c 07 00 00 85 c0 74 de <0f> 0b 48 89 df 5b e9 72 c1 00 00 66 90 0f 1f 44 00 00 41 55 41 54
RSP: 0018:ffffc900030f3e28 EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffff88802ac54000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff81e4a6f0 RDI: 00000000ffffffff
RBP: ffff88807859f070 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000010 R12: 0000000000000000
R13: ffff88807859f388 R14: ffff88807859f4b8 R15: ffff88807859f5e8
FS: 00007fad1c6c0fc0(0000) GS:ffff88807e000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0c7d237000 CR3: 0000000077f01003 CR4: 00000000001606a0
Call Trace:
xfs_fs_freeze+0x25/0x40 [xfs]
freeze_super+0xc8/0x180
do_vfs_ioctl+0x70b/0x750
? __fget_files+0x135/0x210
ksys_ioctl+0x3a/0xb0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x50/0x1a0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
These two things appear to be related. The assertion trips when another
thread initiates a fsmap request (which uses an empty transaction) after
the freezer waited for m_active_trans to hit zero but before the the
freezer executes the WARN_ON just prior to calling xfs_log_quiesce.
The lengthy delays in freezing happen because the freezer calls
xfs_wait_buftarg to clean out the buffer lru list. Meanwhile, the
GETFSMAP caller is continuing to grab and release buffers, which means
that it can take a very long time for the buffer lru list to empty out.
We fix both of these races by calling sb_start_write to obtain freeze
protection while using empty transactions for GETFSMAP and for metadata
scrubbing. The other two users occur during mount, during which time we
cannot fs freeze.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
When we're checking bestfree information in directory blocks, always
drop the block buffer at the end of the function. We should always
release resources when we're done using them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The dirattr btree checking code uses the altpath substructure of the
dirattr state structure to check the sibling pointers of dir/attr tree
blocks. At the end of sibling checks, xfs_da3_path_shift could have
changed multiple levels of buffer pointers in the altpath structure.
Although we release the leaf level buffer, this isn't enough -- we also
need to release the node buffers that are unique to the altpath.
Not releasing all of the altpath buffers leaves them locked to the
transaction. This is suboptimal because we should release resources
when we don't need them anymore. Fix the function to loop all levels of
the altpath, and fix the return logic so that we always run the loop.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add a xbitmap_hweight helper function so that we can get rid of the
open-coded loop.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Shorten the name of xfs_bitmap to xbitmap since the scrub bitmap has
nothing to do with the libxfs bitmap.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Remove the xfs_bitmap_destroy call from the end of xrep_reap_extents
because this sort of violates our rule that the function initializing a
structure should destroy it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
bc_private.b -> bc_ino conversion via script:
$ sed -i 's/bc_private\.b/bc_ino/g' fs/xfs/*[ch] fs/xfs/*/*[ch]
And then revert the change to the bc_ino #define in
fs/xfs/libxfs/xfs_btree.h manually.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: tweak the subject line slightly]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
bc_private.a -> bc_ag conversion via script:
`sed -i 's/bc_private\.a/bc_ag/g' fs/xfs/*[ch] fs/xfs/*/*[ch]`
And then revert the change to the bc_ag #define in
fs/xfs/libxfs/xfs_btree.h manually.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
In xchk_xattr_listent, we attempt to validate the extended attribute
hash structures by performing a attr lookup by (hashed) name. If the
lookup returns ENODATA, that means that the hash information is corrupt.
The _process_error functions don't catch this, so we have to add that
explicitly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
In xchk_dir_actor, we attempt to validate the directory hash structures
by performing a directory entry lookup by (hashed) name. If the lookup
returns ENOENT, that means that the hash information is corrupt. The
_process_error functions don't catch this, so we have to add that
explicitly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Just dereference bp->b_addr directly and make the code a little
simpler and more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Just dereference bp->b_addr directly and make the code a little
simpler and more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Just dereference bp->b_addr directly and make the code a little
simpler and more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
struct xfs_agfl is a header in front of the AGFL entries that exists
for CRC enabled file systems. For not CRC enabled file systems the AGFL
is simply a list of agbno. Make the CRC case similar to that by just
using the list behind the new header. This indirectly solves a problem
with modern gcc versions that warn about taking addresses of packed
structures (and we have to pack the AGFL given that gcc rounds up
structure sizes). Also replace the helper macro to get from a buffer
with an inline function in xfs_alloc.h to make the code easier to
read.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The attrlist cursor only exists as part of an attr list context, so
embedd the structure instead of pointing to it. Also give it a proper
xfs_ prefix and remove the obsolete typedef.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The ATTR_* flags have a long IRIX history, where they a userspace
interface, the on-disk format and an internal interface. We've split
out the on-disk interface to the XFS_ATTR_* values, but despite (or
because?) of that the flag have still been a mess. Switch the
internal interface to pass the on-disk XFS_ATTR_* flags for the
namespace and the Linux XATTR_* flags for the actual flags instead.
The ATTR_* values that are actually used are move to xfs_fs.h with a
new XFS_IOC_* prefix to not conflict with the userspace version that
has the same name and must have the same value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The version taking the context structure is the main interface to list
attributes, so drop the _int postfix.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
op_flags with the XFS_DA_OP_* flags is the usual place for in-kernel
only flags, so move the notime flag there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The inode can easily be derived from the args structure. Also
don't bother with else statements after early returns.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace the ATTR_INCOMPLETE flag with a new boolean field in struct
xfs_attr_list_context.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
- Refactor the metadata buffer functions to return the usual int error
value instead of the open coded error checking mess we have now.
-----BEGIN PGP SIGNATURE-----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=APXi
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.6-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull moar xfs updates from Darrick Wong:
"This contains the buffer error code refactoring I mentioned last week,
now that it has had extra time to complete the full xfs fuzz testing
suite to make sure there aren't any obvious new bugs"
* tag 'xfs-5.6-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix xfs_buf_ioerror_alert location reporting
xfs: remove unnecessary null pointer checks from _read_agf callers
xfs: make xfs_*read_agf return EAGAIN to ALLOC_FLAG_TRYLOCK callers
xfs: remove the xfs_btree_get_buf[ls] functions
xfs: make xfs_trans_get_buf return an error code
xfs: make xfs_trans_get_buf_map return an error code
xfs: make xfs_buf_read return an error code
xfs: make xfs_buf_get_uncached return an error code
xfs: make xfs_buf_get return an error code
xfs: make xfs_buf_read_map return an error code
xfs: make xfs_buf_get_map return an error code
xfs: make xfs_buf_alloc return an error code
- Get rid of compat_time_t
- Convert time_t to time64_t in quota code
- Remove shadow variables
- Prevent ATTR_ flag misuse in the attrmulti ioctls
- Clean out strlen in the attr code
- Remove some bogus asserts
- Fix various file size limit calculation errors with 32-bit kernels
- Pack xfs_dir2_sf_entry_t to fix build errors on arm oabi
- Fix nowait inode locking calls for directio aio reads.
- Fix memory corruption bugs when invalidating remote xattr value
buffers.
- Streamline remote attr value removal.
- Make the buffer log format size consistent across platforms.
- Strengthen buffer log format size checking.
- Fix messed up return types of xfs_inode_need_cow.
- Fix some unused variable warnings.
-----BEGIN PGP SIGNATURE-----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=J5Em
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.6-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"In this release we clean out the last of the old 32-bit timestamp
code, fix a number of bugs and memory corruptions on 32-bit platforms,
and a refactoring of some of the extended attribute code.
I think I'll be back next week with some refactoring of how the XFS
buffer code returns error codes, however I prefer to hold onto that
for another week to let it soak a while longer
Summary:
- Get rid of compat_time_t
- Convert time_t to time64_t in quota code
- Remove shadow variables
- Prevent ATTR_ flag misuse in the attrmulti ioctls
- Clean out strlen in the attr code
- Remove some bogus asserts
- Fix various file size limit calculation errors with 32-bit kernels
- Pack xfs_dir2_sf_entry_t to fix build errors on arm oabi
- Fix nowait inode locking calls for directio aio reads
- Fix memory corruption bugs when invalidating remote xattr value
buffers
- Streamline remote attr value removal
- Make the buffer log format size consistent across platforms
- Strengthen buffer log format size checking
- Fix messed up return types of xfs_inode_need_cow
- Fix some unused variable warnings"
* tag 'xfs-5.6-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (24 commits)
xfs: remove unused variable 'done'
xfs: fix uninitialized variable in xfs_attr3_leaf_inactive
xfs: change return value of xfs_inode_need_cow to int
xfs: check log iovec size to make sure it's plausibly a buffer log format
xfs: make struct xfs_buf_log_format have a consistent size
xfs: complain if anyone tries to create a too-large buffer log item
xfs: clean up xfs_buf_item_get_format return value
xfs: streamline xfs_attr3_leaf_inactive
xfs: fix memory corruption during remote attr value buffer invalidation
xfs: refactor remote attr value buffer invalidation
xfs: fix IOCB_NOWAIT handling in xfs_file_dio_aio_read
xfs: Add __packed to xfs_dir2_sf_entry_t definition
xfs: fix s_maxbytes computation on 32-bit kernels
xfs: truncate should remove all blocks, not just to the end of the page cache
xfs: introduce XFS_MAX_FILEOFF
xfs: remove bogus assertion when online repair isn't enabled
xfs: Remove all strlen in all xfs_attr_* functions for attr names.
xfs: fix misuse of the XFS_ATTR_INCOMPLETE flag
xfs: also remove cached ACLs when removing the underlying attr
xfs: reject invalid flags combinations in XFS_IOC_ATTRMULTI_BY_HANDLE
...
Drop the null buffer pointer checks in all code that calls
xfs_alloc_read_agf and doesn't pass XFS_ALLOC_FLAG_TRYLOCK because
they're no longer necessary.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Convert xfs_trans_get_buf() to return numeric error codes like most
everywhere else in xfs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
We don't need to assert on !REPAIR in the stub version of
xrep_calc_ag_resblks that is called when online repair hasn't been
compiled into the kernel because none of the repair code will ever run.
Reported-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Allow a fatal signal to interrupt us when we're scanning a directory to
verify a parent pointer.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Rework event_create_dir() to use an array of static data instead of
function pointers where possible.
The problem is that it would call the function pointer on module load
before parse_args(), possibly even before jump_labels were initialized.
Luckily the generated functions don't use jump_labels but it still seems
fragile. It also gets in the way of changing when we make the module map
executable.
The generated function are basically calling trace_define_field() with a
bunch of static arguments. So instead of a function, capture these
arguments in a static array, avoiding the function call.
Now there are a number of cases where the fields are dynamic (syscall
arguments, kprobes and uprobes), in which case a static array does not
work, for these we preserve the function call. Luckily all these cases
are not related to modules and so we can retain the function call for
them.
Also fix up all broken tracepoint definitions that now generate a
compile error.
Tested-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191111132458.342979914@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Move the code for reading an already mapped block into
xfs_da3_node_read_mapped, which is the only caller ever passing a block
number in the mappedbno argument and replace the mappedbno argument with
the simple xfs_dabuf_get flags.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This argument is always hard coded to -1, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace the mappedbno argument with the simple flags for xfs_da_reada_buf
and xfs_dir3_data_readahead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace the ->data_bestfree_p dir ops method with a directly called
xfs_dir2_data_bestfree_p helper that takes care of the differences
between the v4 and v5 on-disk format.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move the data block fixed offsets towards our structure for dir/attr
geometry parameters.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace the ->data_entry_tag_p dir ops method with a directly called
xfs_dir2_data_entry_tag_p helper that takes care of the differences
between the directory format with and without the file type field.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace the ->data_entsize dir ops method with a directly called
xfs_dir2_data_entsize helper that takes care of the differences between
the directory format with and without the file type field.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All the callers really want an offset into the buffer, so adopt
the helper to return that instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use an offset as the main means for iteration, and only do pointer
arithmetics to find the data/unused entries.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use an offset as the main means for iteration, and only do pointer
arithmetics to find the data/unused entries.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All but two callers of the ->free_bests_p dir operation already have a
struct xfs_dir3_icfree_hdr from a previous call to
xfs_dir2_free_hdr_from_disk at hand. Add a pointer to the bests to
struct xfs_dir3_icfree_hdr to clean up this pattern. To optimize this
pattern, pass the struct xfs_dir3_icfree_hdr to xfs_dir2_free_log_bests
instead of recalculating the pointer there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace the ->free_hdr_from_disk dir ops method with a directly called
xfs_dir_free_hdr_from_disk helper that takes care of the differences
between the v4 and v5 on-disk format.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move the max leaf entries count towards our structure for dir/attr
geometry parameters.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All callers of the ->node_tree_p dir operation already have a struct
xfs_dir3_icleaf_hdr from a previous call to xfs_da_leaf_hdr_from_disk at
hand, or just need slight changes to the calling conventions to do so.
Add a pointer to the entries to struct xfs_dir3_icleaf_hdr to clean up
this pattern. To make this possible the xfs_dir3_leaf_log_ents function
grow a new argument to pass the xfs_dir3_icleaf_hdr that call callers
already have, and xfs_dir2_leaf_lookup_int returns the
xfs_dir3_icleaf_hdr to the callers so that they can later use it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace the ->leaf_hdr_from_disk dir ops method with a directly called
xfs_dir2_leaf_hdr_from_disk helper that takes care of the differences
between the v4 and v5 on-disk format.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All but two callers of the ->node_tree_p dir operation already have a
xfs_da3_icnode_hdr from a previous call to xfs_da3_node_hdr_from_disk at
hand. Add a pointer to the btree entries to struct xfs_da3_icnode_hdr
to clean up this pattern. The two remaining callers now expand the
whole header as well, but that isn't very expensive and not in a super
hot path anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace the ->node_hdr_from_disk dir ops method with a directly called
xfs_da_node_hdr_from_disk helper that takes care of the v4 vs v5
difference.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Break up xchk_da_btree_entry and handle looking up leaf node entries
in the attr / dir callbacks, so that only the generic node handling
is left in the common core code. Note that the checks for the crc
enabled blocks are removed, as the scrubbing code already remaps the
magic numbers earlier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace the open-coded checks for whether or not an inode fork maps
blocks with a macro that will implant the code for us. This helps us
declutter the bmap code a bit.
Note that I had to use a macro instead of a static inline function
because of C header dependency problems between xfs_inode.h and
xfs_inode_fork.h.
Conversion was performed with the following Coccinelle script:
@@
expression ip, w;
@@
- XFS_IFORK_FORMAT(ip, w) == XFS_DINODE_FMT_EXTENTS || XFS_IFORK_FORMAT(ip, w) == XFS_DINODE_FMT_BTREE
+ xfs_ifork_has_extents(ip, w)
@@
expression ip, w;
@@
- XFS_IFORK_FORMAT(ip, w) != XFS_DINODE_FMT_EXTENTS && XFS_IFORK_FORMAT(ip, w) != XFS_DINODE_FMT_BTREE
+ !xfs_ifork_has_extents(ip, w)
@@
expression ip, w;
@@
- XFS_IFORK_FORMAT(ip, w) == XFS_DINODE_FMT_BTREE || XFS_IFORK_FORMAT(ip, w) == XFS_DINODE_FMT_EXTENTS
+ xfs_ifork_has_extents(ip, w)
@@
expression ip, w;
@@
- XFS_IFORK_FORMAT(ip, w) != XFS_DINODE_FMT_BTREE && XFS_IFORK_FORMAT(ip, w) != XFS_DINODE_FMT_EXTENTS
+ !xfs_ifork_has_extents(ip, w)
@@
expression ip, w;
@@
- (xfs_ifork_has_extents(ip, w))
+ xfs_ifork_has_extents(ip, w)
@@
expression ip, w;
@@
- (!xfs_ifork_has_extents(ip, w))
+ !xfs_ifork_has_extents(ip, w)
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Some of the xfs source files are missing header includes, so add them
back. Sparse complains about non-static functions that don't have a
forward declaration anywhere.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Christoph Hellwig complained about the following soft lockup warning
when running scrub after generic/175 when preemption is disabled and
slub debugging is enabled:
watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [xfs_scrub:161]
Modules linked in:
irq event stamp: 41692326
hardirqs last enabled at (41692325): [<ffffffff8232c3b7>] _raw_0
hardirqs last disabled at (41692326): [<ffffffff81001c5a>] trace0
softirqs last enabled at (41684994): [<ffffffff8260031f>] __do_e
softirqs last disabled at (41684987): [<ffffffff81127d8c>] irq_e0
CPU: 3 PID: 16189 Comm: xfs_scrub Not tainted 5.4.0-rc3+ #30
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.124
RIP: 0010:_raw_spin_unlock_irqrestore+0x39/0x40
Code: 89 f3 be 01 00 00 00 e8 d5 3a e5 fe 48 89 ef e8 ed 87 e5 f2
RSP: 0018:ffffc9000233f970 EFLAGS: 00000286 ORIG_RAX: ffffffffff3
RAX: ffff88813b398040 RBX: 0000000000000286 RCX: 0000000000000006
RDX: 0000000000000006 RSI: ffff88813b3988c0 RDI: ffff88813b398040
RBP: ffff888137958640 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffea00042b0c00
R13: 0000000000000001 R14: ffff88810ac32308 R15: ffff8881376fc040
FS: 00007f6113dea700(0000) GS:ffff88813bb80000(0000) knlGS:00000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6113de8ff8 CR3: 000000012f290000 CR4: 00000000000006e0
Call Trace:
free_debug_processing+0x1dd/0x240
__slab_free+0x231/0x410
kmem_cache_free+0x30e/0x360
xchk_ag_btcur_free+0x76/0xb0
xchk_ag_free+0x10/0x80
xchk_bmap_iextent_xref.isra.14+0xd9/0x120
xchk_bmap_iextent+0x187/0x210
xchk_bmap+0x2e0/0x3b0
xfs_scrub_metadata+0x2e7/0x500
xfs_ioc_scrub_metadata+0x4a/0xa0
xfs_file_ioctl+0x58a/0xcd0
do_vfs_ioctl+0xa0/0x6f0
ksys_ioctl+0x5b/0x90
__x64_sys_ioctl+0x11/0x20
do_syscall_64+0x4b/0x1a0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
If preemption is disabled, all metadata buffers needed to perform the
scrub are already in memory, and there are a lot of records to check,
it's possible that the scrub thread will run for an extended period of
time without sleeping for IO or any other reason. Then the watchdog
timer or the RCU stall timeout can trigger, producing the backtrace
above.
To fix this problem, call cond_resched() from the scrub thread so that
we back out to the scheduler whenever necessary.
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Scrubbing directories, quotas, and fs counters all involve iterating
some collection of metadata items. The per-item scrub functions for
these three are missing some of the components they need to be able to
check for a fatal signal and terminate early.
Per-item scrub functions need to call xchk_should_terminate to look for
fatal signals, and they need to check the scrub context's corruption
flag because there's no point in continuing a scan once we've decided
the data structure is bad. Add both of these where missing.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
xfs_iread_extents open-codes everything in xfs_btree_visit_blocks, so
refactor the btree helper to be able to iterate only the records on
level 0, then port iread_extents to use it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Removed unused error variable. Instead of using error variable,
returned the value directly as it wasn't updated.
Signed-off-by: Aliasgar Surti <aliasgar.surti500@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Returned value directly instead of using variable as it wasn't updated.
Signed-off-by: Aliasgar Surti <aliasgar.surti500@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Shortform, leaf and remote value attr value retrieval return
different values for success. This makes it more complex to handle
actual errors xfs_attr_get() as some errors mean success and some
mean failure. Make the return values consistent for success and
failure consistent for all attribute formats.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use -ECANCELED to signal "stop iterating" instead of these magical
*_ITER_ABORT values, since it's duplicative.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
xfs_trans_log_buf() takes a final argument of the last byte to
log in the buffer; b_length is in basic blocks, so this isn't
the correct last byte. Fix it.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The inode block mapping scrub function does more work for btree format
extent maps than is absolutely necessary -- first it will walk the bmbt
and check all the entries, and then it will load the incore tree and
check every entry in that tree, possibly for a second time.
Simplify the code and decrease check runtime by separating the two
responsibilities. The bmbt walk will make sure the incore extent
mappings are loaded, check the shape of the bmap btree (via xchk_btree)
and check that every bmbt record has a corresponding incore extent map;
and the incore extent map walk takes all the responsibility for checking
the mapping records and cross referencing them with other AG metadata.
This enables us to clean up some messy parameter handling and reduce
redundant code. Rename a few functions to make the split of
responsibilities clearer.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Since no caller is using KM_NOSLEEP and no callee branches on KM_SLEEP,
we can remove KM_NOSLEEP and replace KM_SLEEP with 0.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In xchk_da_btree_block_check_sibling(), there is an if statement on
line 274 to check whether ds->state->altpath.blk[level].bp is NULL:
if (ds->state->altpath.blk[level].bp)
When ds->state->altpath.blk[level].bp is NULL, it is used on line 281:
xfs_trans_brelse(..., ds->state->altpath.blk[level].bp);
struct xfs_buf_log_item *bip = bp->b_log_item;
ASSERT(bp->b_transp == tp);
Thus, possible null-pointer dereferences may occur.
To fix these bugs, ds->state->altpath.blk[level].bp is checked before
being used.
These bugs are found by a static analysis tool STCheck written by us.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The xattr scrubber functions use the temporary memory buffer either for
storing bitmaps or for testing if attribute value extraction works. The
bitmap code always zeroes what it needs and the value extraction sets
the buffer contents, so it's not necessary to waste CPU time zeroing on
allocation.
Note that while we never read the contents that the attr value
extraction function sets, we do need to call it to check the remote
attribute header and CRCs to check for corruption.
A flame graph analysis showed that we were spending 7% of a xfs_scrub
run (the whole program, not just the attr scrubber itself) allocating
and zeroing 64k segments needlessly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
In examining a flame graph of time spent running xfs_scrub on various
filesystems, I noticed that we spent nearly 7% of the total runtime on
allocating a zeroed 65k buffer for every SCRUB_TYPE_XATTR invocation.
We do this even if none of the attribute values were anywhere near 64k
in size, even if there were no attribute blocks to check space on, and
even if it just turns out there are no attributes at all.
Therefore, rearrange the xattr buffer setup code to support reallocating
with a bigger buffer and redistribute the callers of that function so
that we only allocate memory just prior to needing it, and only allocate
as much as we need. If we can't get memory with the ILOCK held we'll
bail out with EDEADLOCK which will allocate the maximum memory.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Move the code that allocates memory buffers for the extended attribute
scrub code into a separate function so we can reduce memory allocations
in the next patch.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Replace the open-coded attribute buffer pointer calculations with helper
functions to make it more obvious what we're doing with our freeform
memory allocation w.r.t. either storing xattr values or computing btree
block free space.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
When we're iterating all the attributes using the built-in xattr
iterator, we can use the seen_enough variable to pass error codes back
to the main scrub function instead of flattening them into 0/1. This
will be used in a more exciting fashion in upcoming patches.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Currently, xfs doesn't have generic error codes defined for "stop
iterating"; we just reuse the XFS_BTREE_QUERY_* return values. This
looks a little weird if we're not actually iterating a btree index.
Before we start adding more iterators, we should create general
XFS_ITER_{CONTINUE,ABORT} return values and define the XFS_BTREE_QUERY_*
ones from that.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
There are many, many xfs header files which are included but
unneeded (or included twice) in the xfs code, so remove them.
nb: xfs_linux.h includes about 9 headers for everyone, so those
explicit includes get removed by this. I'm not sure what the
preference is, but if we wanted explicit includes everywhere,
a followup patch could remove those xfs_*.h includes from
xfs_linux.h and move them into the files that need them.
Or it could be left as-is.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There are several functions which take a flag argument that is
only ever passed as "0," so remove these arguments.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Separate the inode geometry information into a distinct structure.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The im_boffset field is in units of bytes, whereas XFS_INO_OFFSET
returns a value in units of inodes. Convert the units so that scrub on
a 64k-block filesystem works correctly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Teach online scrub how to check the filesystem summary counters. We use
the incore delalloc block counter along with the incore AG headers to
compute expected values for fdblocks, icount, and ifree, and then check
that the percpu counter is within a certain threshold of the expected
value. This is done to avoid having to freeze or otherwise lock the
filesystem, which means that we're only checking that the counters are
fairly close, not that they're exactly correct.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
In theory, the incore per-AG structure counters should match the ones on
disk, so check that.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The forthcoming summary counter patch races with regular filesystem
activity to compute rough expected values for the counters. This design
was chosen to avoid having to freeze the entire filesystem to check the
counters, but while that's running we'd prefer to minimize background
reclamation activity to reduce the perturbations to the incore free
block count. Therefore, provide a way for scrubbers to disable
background posteof and cowblock reclamation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
In xrep_roll_ag_trans, the transaction roll will always set sc->tp to
the new transaction, even if committing the old one fails. A bare
transaction roll leaves the buffer(s) locked but not joined to the new
transaction, so it's not necessary to release the hold if the roll
fails. Remove the incorrect xfs_trans_bhold_release calls.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Skip cross-referencing with a btree if the health report tells us that
it's known to be bad. This should reduce the dmesg spew considerably.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Now that we have the ability to track sick metadata in-core, make scrub
and repair update those health assessments after doing work.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Now that we no longer memset the scrub context, we can move the
already_fixed variable into the scrub context's state flags instead of
passing around pointers to separate stack variables.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Combine all the boolean state flags in struct xfs_scrub into a single
unsigned int, because we're going to be adding more state flags soon.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
It's a little silly how the memset in scrub context initialization
forces us to declare stack variables to preserve context variables
across a retry. Since the teardown functions already null out most of
the ephemeral state (buffer pointers, btree cursors, etc.), just skip
the memset and move the initialization as needed.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
In xchk_btree_check_owner, we can be passed a null buffer pointer. This
should only happen for the root of a root-in-inode btree type, but we
should program defensively in case the btree cursor state ever gets
screwed up and we get a null buffer anyway.
Coverity-id: 1438713
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Make sure scrub's dabtree iterator function checks that we're not
going deeper in the stack than our cursor permits.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Fix a backwards endian conversion of a constant.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
A previous commit removed the initialization of variable 'error' to zero,
and can cause a bogus error return. This occurs when error contains a
non-zero garbage value and the call to xchk_should_terminate detects a
pending fatal signal and checks for a zero error before setting it
to -EAGAIN. Fix the issue by initializing error to zero.
Fixes: b9454fe056 ("xfs: clean up the inode cluster checking in the inobt scrub")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that we encode block magic numbers in all the buffer ops, use that
for block type detection in the ag header repair code instead of
encoding magics directly in the repair code.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Similar to the inode btree verifier, the same allocation btree
verifier structure is shared between the by-bno (bnobt) and by-size
(cntbt) btrees. This prevents the ability to distinguish magic
values between them. Separate the verifier into two, one for each
tree, and assign them appropriately. No functional changes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The inobt verifier is reused for the inobt and finobt, which
prevents the ability to distinguish between magic values on a
per-tree basis. Create a separate finobt structure in preparation
for changes to enforce the appropriate magic value for the
associated tree. This patch has no functional change.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Add a new helper to check that a per-AG inode pointer is either null or
points somewhere valid within that AG.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Check extended attribute entry names for invalid characters.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Check directory entry names for invalid characters.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Fix an off-by-one error in the realtime bitmap "is used" cross-reference
helper function if the realtime extent size is a single block.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Teach scrub to flag extent maps that exceed the range that can be mapped
with a xfs_dablk_t.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The extended attribute scrubber should abort the "read all attrs" loop
if there's a fatal signal pending on the process.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Move all the confusing dinode mapping code that's split between
xchk_iallocbt_check_cluster and xchk_iallocbt_check_cluster_ifree into
the first function so that it's clearer how we find the dinode for a
given inode.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Teach scrub how to handle the case that there are one or more inobt
records covering a given inode cluster. This fixes the operation on big
block filesystems (e.g. 64k blocks, 512 byte inodes).
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The code to check inobt records against inode clusters is a mess of
poorly named variables and unnecessary parameters. Clean the
unnecessary inode number parameters out of _check_cluster_freemask in
favor of computing them inside the function instead of making the caller
do it. In xchk_iallocbt_check_cluster, rename the variables to make it
more obvious just what chunk_ino and cluster_ino represent.
Add a tracepoint to make it easier to track each inode cluster as we
scrub it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
