* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits)
net: Allow dependancies of FDDI & Tokenring to be modular.
igb: Fix build warning when DCA is disabled.
net: Fix warning fallout from recent NAPI interface changes.
gro: Fix potential use after free
sfc: If AN is enabled, always read speed/duplex from the AN advertising bits
sfc: When disabling the NIC, close the device rather than unregistering it
sfc: SFT9001: Add cable diagnostics
sfc: Add support for multiple PHY self-tests
sfc: Merge top-level functions for self-tests
sfc: Clean up PHY mode management in loopback self-test
sfc: Fix unreliable link detection in some loopback modes
sfc: Generate unique names for per-NIC workqueues
802.3ad: use standard ethhdr instead of ad_header
802.3ad: generalize out mac address initializer
802.3ad: initialize ports LACPDU from const initializer
802.3ad: remove typedef around ad_system
802.3ad: turn ports is_individual into a bool
802.3ad: turn ports is_enabled into a bool
802.3ad: make ntt bool
ixgbe: Fix set_ringparam in ixgbe to use the same memory pools.
...
Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due
to the conversion to %pI (in this networking merge) and the addition of
doing IPv6 addresses (from the earlier merge of CIFS).
Define the OCFS2_FEATURE_COMPAT_JBD2 bit in the filesystem header.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
When we create xattr bucket during the process of xattr set, we always
need to update the ocfs2_xattr_search since even if the bucket size is
the same as block size, the offset will change because of the removal
of the ocfs2_xattr_block header.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Conflicts:
fs/nfsd/nfs4recover.c
Manually fixed above to use new creds API functions, e.g.
nfs4_save_creds().
Signed-off-by: James Morris <jmorris@namei.org>
We're panicing in ocfs2_read_blocks_sync() if a jbd-managed buffer is seen.
At first glance, this seems ok but in reality it can happen. My test case
was to just run 'exorcist'. A struct inode is being pushed out of memory but
is then re-read at a later time, before the buffer has been checkpointed by
jbd. This causes a BUG to be hit in ocfs2_read_blocks_sync().
Reviewed-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
In init_dlmfs_fs(), if calling kmem_cache_create() failed, the code will use return value from
calling bdi_init(). The correct behavior should be set status as -ENOMEM before going to "bail:".
Signed-off-by: Coly Li <coyli@suse.de>
Acked-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
In ocfs2_unlock_ast(), call wake_up() on lockres before releasing
the spin lock on it. As soon as the spin lock is released, the
lockres can be freed.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The locking_state dump, ocfs2_dlm_seq_show, reads the lvb on locks where it
has not yet been initialized by a lock call.
Signed-off-by: David Teigland <teigland@redhat.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Conflicts:
security/keys/internal.h
security/keys/process_keys.c
security/keys/request_key.c
Fixed conflicts above by using the non 'tsk' versions.
Signed-off-by: James Morris <jmorris@namei.org>
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.
Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: ocfs2-devel@oss.oracle.com
Signed-off-by: James Morris <jmorris@namei.org>
ocfs2_xattr_block_get() calls ocfs2_xattr_search() to find an external
xattr, but doesn't check the search result that is passed back via struct
ocfs2_xattr_search. Add a check for search result, and pass back -ENODATA if
the xattr search failed. This avoids a later NULL pointer error.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Dmitri Monakhov <dmonakhov@openvz.org>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Joel Becker <Joel.Becker@oracle.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
In ocfs2/xattr, we must make sure the xattrs which have the same hash value
exist in the same bucket so that the search schema can work. But in the old
implementation, when we want to extend a bucket, we just move half number of
xattrs to the new bucket. This works in most cases, but if we are lucky
enough we will move 2 xattrs into 2 different buckets. This means that an
xattr from the previous bucket cannot be found anymore. This patch fix this
problem by finding the right position during extending the bucket and extend
an empty bucket if needed.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Cc: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
In ocfs2_page_mkwrite, we return -EINVAL when we found the page mapping
isn't updated, and it will cause the user space program get SIGBUS and
exit. The reason is that during race writeable mmap, we will do
unmap_mapping_range in ocfs2_data_downconvert_worker. The good thing is
that if we reuturn 0 in page_mkwrite, VFS will retry fault and then
call page_mkwrite again, so it is safe to return 0 here.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Patch sets journal descriptor to NULL after the journal is shutdown.
This ensures that jbd2_journal_release_jbd_inode(), which removes the
jbd2 inode from txn lists, can be called safely from ocfs2_clear_inode()
even after the journal has been shutdown.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
On failure, ocfs2_start_trans() returns values like ERR_PTR(-ENOMEM),
so we should check whether handle is NULL. Fix them to use IS_ERR().
Jan has made the patch for other part in ocfs2(thank Jan for it), so
this is just the fix for fs/ocfs2/xattr.c.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
We forgot to set i_nlink to 0 when returning due to error from ocfs2_mknod_locked()
and thus inode was not properly released via ocfs2_delete_inode() (e.g. claimed
space was not released). Fix it.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
new_inode() does not return ERR_PTR() but NULL in case of failure. Correct
checking of the return value.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
On failure, ocfs2_start_trans() returns values like ERR_PTR(-ENOMEM).
Thus checks for !handle are wrong. Fix them to use IS_ERR().
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Fix some typos in the xattr annotations.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Reported-by: Coly Li <coyli@suse.de>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Since now ocfs2 supports empty xattr buckets, we will never remove
the xattr index tree even if all the xattrs are removed, so this
function will never be called. So remove it.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
ocfs2_xattr_block_get() looks up the xattr in a startlingly familiar
way; it's identical to the function ocfs2_xattr_block_find(). Let's just
use the later in the former.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
There are a couple places that get an xattr bucket that may be reading
an existing one or may be allocating a new one. They should specify the
correct journal access mode depending.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The ocfs2_xattr_update_xattr_search() function can return an error when
trying to read blocks off of disk. The caller needs to check this error
before using those (possibly invalid) blocks.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
If the xattr disk structures are corrupt, return -EIO, not -EFAULT.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The xattr.c code is currently memcmp()ing naking buffer pointers.
Create the OCFS2_IS_VALID_XATTR_BLOCK() macro to match its peers and use
that.
In addition, failed signature checks were returning -EFAULT, which is
completely wrong. Return -EIO.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Make the handler_map array as large as the possible value range to avoid
a fencepost error.
[ Utilize alternate method -- Joel ]
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Include/linux/xattr.h already has the definition about xattr prefix,
so remove the duplicate definitions in xattr.c.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Because we merged the xattr sources into one file, some functions
no longer belong in the header file.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch fixes the license in xattr.c and xattr.h.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u
can be replaced with %pI4
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nothing uses prepare_write or commit_write. Remove them from the tree
completely.
[akpm@linux-foundation.org: schedule simple_prepare_write() for unexporting]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/viro/bdev: (66 commits)
[PATCH] kill the rest of struct file propagation in block ioctls
[PATCH] get rid of struct file use in blkdev_ioctl() BLKBSZSET
[PATCH] get rid of blkdev_locked_ioctl()
[PATCH] get rid of blkdev_driver_ioctl()
[PATCH] sanitize blkdev_get() and friends
[PATCH] remember mode of reiserfs journal
[PATCH] propagate mode through swsusp_close()
[PATCH] propagate mode through open_bdev_excl/close_bdev_excl
[PATCH] pass fmode_t to blkdev_put()
[PATCH] kill the unused bsize on the send side of /dev/loop
[PATCH] trim file propagation in block/compat_ioctl.c
[PATCH] end of methods switch: remove the old ones
[PATCH] switch sr
[PATCH] switch sd
[PATCH] switch ide-scsi
[PATCH] switch tape_block
[PATCH] switch dcssblk
[PATCH] switch dasd
[PATCH] switch mtd_blkdevs
[PATCH] switch mmc
...
* get rid of fake struct file/struct dentry in __blkdev_get()
* merge __blkdev_get() and do_open()
* get rid of flags argument of blkdev_get()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ocfs2_read_blocks() currently requires the CACHED flag for cached I/O.
However, that's the common case. Let's flip it around and provide an
IGNORE_CACHE flag for the special users. This has the added benefit of
cleaning up the code some (ignore_cache takes on its special meaning
earlier in the loop).
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
ocfs2's cached buffer I/O goes through ocfs2_read_block(s)(). dir.c had
a naked wait_on_buffer() to wait for some readahead, but it should
use ocfs2_read_block() instead.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
dir.c is the only place using ocfs2_bread(), so let's make it static to
that file.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
More than 30 callers of ocfs2_read_block() pass exactly OCFS2_BH_CACHED.
Only six pass a different flag set. Rather than have every caller care,
let's make ocfs2_read_block() take no flags and always do a cached read.
The remaining six places can call ocfs2_read_blocks() directly.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Now that synchronous readers are using ocfs2_read_blocks_sync(), all
callers of ocfs2_read_blocks() are passing an inode. Use it
unconditionally. Since it's there, we don't need to pass the
ocfs2_super either.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The ocfs2_read_blocks() function currently handles sync reads, cached,
reads, and sometimes cached reads. We're going to add some
functionality to it, so first we should simplify it. The uncached,
synchronous reads are much easer to handle as a separate function, so we
instroduce ocfs2_read_blocks_sync().
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
According to Christoph Hellwig's advice, we really don't need
a ->list to handle one xattr's list. Just a map from index to
xattr prefix is enough. And I also refactor the old list method
with the reference from fs/xfs/linux-2.6/xfs_xattr.c and the
xattr list method in btrfs.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
According to Christoph Hellwig's advice, the hash value of EA
is only calculated by its suffix.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
