2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 14:43:58 +08:00
Commit Graph

22 Commits

Author SHA1 Message Date
Christoph Hellwig
2a842acab1 block: introduce new block status code type
Currently we use nornal Linux errno values in the block layer, and while
we accept any error a few have overloaded magic meanings.  This patch
instead introduces a new  blk_status_t value that holds block layer specific
status codes and explicitly explains their meaning.  Helpers to convert from
and to the previous special meanings are provided for now, but I suspect
we want to get rid of them in the long run - those drivers that have a
errno input (e.g. networking) usually get errnos that don't know about
the special block layer overloads, and similarly returning them to userspace
will usually return somethings that strictly speaking isn't correct
for file system operations, but that's left as an exercise for later.

For now the set of errors is a very limited set that closely corresponds
to the previous overloaded errno values, but there is some low hanging
fruite to improve it.

blk_status_t (ab)uses the sparse __bitwise annotations to allow for sparse
typechecking, so that we can easily catch places passing the wrong values.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-09 09:27:32 -06:00
Christoph Hellwig
17d5363b83 scsi: introduce a result field in struct scsi_request
This passes on the scsi_cmnd result field to users of passthrough
requests.  Currently we abuse req->errors for this purpose, but that
field will go away in its current form.

Note that the old IDE code abuses the errors field in very creative
ways and stores all kinds of different values in it.  I didn't dare
to touch this magic, so the abuses are brought forward 1:1.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20 12:16:10 -06:00
Christoph Hellwig
aebf526b53 block: fold cmd_type into the REQ_OP_ space
Instead of keeping two levels of indirection for requests types, fold it
all into the operations.  The little caveat here is that previously
cmd_type only applied to struct request, while the request and bio op
fields were set to plain REQ_OP_READ/WRITE even for passthrough
operations.

Instead this patch adds new REQ_OP_* for SCSI passthrough and driver
private requests, althought it has to add two for each so that we
can communicate the data in/out nature of the request.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31 14:00:44 -07:00
Christoph Hellwig
2f5a8e80f7 ide: don't abuse cmd_type
Currently the legacy ide driver defines several request types of it's own,
which is in the way of removing that field entirely.

Instead add a type field to struct ide_request and use that to distinguish
the different types of IDE-internal requests.

It's a bit of a mess, but so is the surrounding code..

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31 14:00:39 -07:00
Christoph Hellwig
82ed4db499 block: split scsi_request out of struct request
And require all drivers that want to support BLOCK_PC to allocate it
as the first thing of their private data.  To support this the legacy
IDE and BSG code is switched to set cmd_size on their queues to let
the block layer allocate the additional space.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-27 15:08:35 -07:00
Christoph Hellwig
a7928c1578 block: move PM request support to IDE
This removes the request types and hacks from the block code and into the
old IDE driver.  There is a small amunt of code duplication due to this,
but it's not too bad.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-05 13:40:42 -06:00
Christoph Hellwig
4f8c9510ba block: rename REQ_TYPE_SPECIAL to REQ_TYPE_DRV_PRIV
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-05 13:40:03 -06:00
Paul Gortmaker
38789fda29 ide/ata: Add export.h for EXPORT_SYMBOL/THIS_MODULE where needed
They were getting this implicitly by an include of module.h
from device.h -- but we are going to clean that up and break
that include chain, so include export.h explicitly now.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:37 -04:00
Christoph Hellwig
33659ebbae block: remove wrappers for request type/flags
Remove all the trivial wrappers for the cmd_type and cmd_flags fields in
struct requests.  This allows much easier grepping for different request
types instead of unwinding through macros.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:17:56 +02:00
Bartlomiej Zolnierkiewicz
5e955245d6 ide: always kill the whole request on error
* Use blk_rq_bytes() instead of obsolete ide_rq_bytes() in ide_kill_rq()
  and ide_floppy_do_request() for failed requests.
  [ bugfix part ]

* Use blk_rq_bytes() instead of obsolete ide_rq_bytes() in ide_do_devset()
  and ide_complete_drive_reset().  Then remove ide_rq_bytes().
  [ cleanup part ]

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-25 23:57:16 -07:00
Bartlomiej Zolnierkiewicz
734affdcae ide: add IDE_DFLAG_NIEN_QUIRK device flag
Add IDE_DFLAG_NIEN_QUIRK device flag and use it instead of
drive->quirk_list.

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 15:37:10 +02:00
Bartlomiej Zolnierkiewicz
ca1b96e00a ide: replace special_t typedef by IDE_SFLAG_* flags
Replace:
- special_t typedef by IDE_SFLAG_* flags
- 'special_t special' ide_drive_t's field by 'u8 special_flags' one

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 19:12:21 +02:00
Sergei Shtylyov
fdd88f0af6 ide: inline SELECT_DRIVE()
Since SELECT_DRIVE() has boiled down to a mere dev_select() method call, it now
makes sense to just inline it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:33 +02:00
Sergei Shtylyov
ecf3a31d2a ide: turn set_irq() method into write_devctl() method
Turn set_irq() method with its software reset hack into write_devctl() method
(for just writing a value into the device control register) at last...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:30 +02:00
Bartlomiej Zolnierkiewicz
60c0cd02b2 ide: set hwif->expiry prior to calling [__]ide_set_handler()
* Set hwif->expiry prior to calling [__]ide_set_handler()
  and drop 'expiry' argument.

* Set hwif->expiry to NULL in ide_{timer_expiry,intr}()
  and remove 'hwif->expiry = NULL' assignments.

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:46 +01:00
Bartlomiej Zolnierkiewicz
130e886708 ide: remove ide_end_request()
* Add ide_rq_bytes() helper.

* Add blk_noretry_request() quirk to ide_complete_rq() (currently only fs
  requests can be marked as "noretry" so there is no change in behavior).

* Switch current ide_end_request() users to use ide_complete_rq().

  [ No need to check for rq->nr_sectors == 0 in {ide_dma,task_pio}_intr(),
    nsectors == 0 in cdrom_end_request() and err == 0 in ide_do_devset(). ]

* Remove no longer needed ide_end_request().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:45 +01:00
Bartlomiej Zolnierkiewicz
f974b196f5 ide: pass number of bytes to complete to ide_complete_rq()
There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:44 +01:00
Bartlomiej Zolnierkiewicz
89f78b3261 ide: move rq->errors quirk out from ide_end_request()
Move rq->errors quirk out from ide_end_request() to its call sites.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:43 +01:00
Bartlomiej Zolnierkiewicz
6902a53312 ide: pass error value to ide_complete_rq()
Set rq->errors at ide_complete_rq() call sites and then pass
error value to ide_complete_rq().

[ Some rq->errors assignments look really wrong but this patch
  leaves them alone to not introduce too many changes at once. ]

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:43 +01:00
Bartlomiej Zolnierkiewicz
22aa4b32a1 ide: remove ide_task_t typedef
While at it:
- rename struct ide_task_s to struct ide_cmd
- remove stale comments from idedisk_{read_native,set}_max_address()
- drop unused 'cmd' argument from ide_{cmd,task}_ioctl()
- drop unused 'task' argument from tx4939ide_tf_load_fixup()
- rename ide_complete_task() to ide_complete_cmd()
- use consistent naming for struct ide_cmd variables

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:37 +01:00
Bartlomiej Zolnierkiewicz
a09485df9c ide: move request type specific code from ide_end_drive_cmd() to callers (v3)
* Move request type specific code from ide_end_drive_cmd() to callers.

* Remove stale ide_end_drive_cmd() documentation and drop no longer
  used 'stat' argument.  Then rename the function to ide_complete_rq().

v2:
* Fix handling of blk_pm_request() requests in task_no_data_intr().

v3:
* Some ide_no_data_taskfile() users (HPA code and HDIO_DRIVE_* ioctls
  handlers) access original command later so we need to update it in
  ide_complete_task().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:31 +01:00
Bartlomiej Zolnierkiewicz
327fa1c294 ide: move error handling code to ide-eh.c (v2)
Do some CodingStyle fixups in <linux/ide.h> while at it.

v2:
Add missing <linux/delay.h> include (reported by Stephen Rothwell).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24 23:22:47 +01:00