ARM:
- Improved guest IPA space support (32 to 52 bits)
- RAS event delivery for 32bit
- PMU fixes
- Guest entry hardening
- Various cleanups
- Port of dirty_log_test selftest
PPC:
- Nested HV KVM support for radix guests on POWER9. The performance is
much better than with PR KVM. Migration and arbitrary level of
nesting is supported.
- Disable nested HV-KVM on early POWER9 chips that need a particular hardware
bug workaround
- One VM per core mode to prevent potential data leaks
- PCI pass-through optimization
- merge ppc-kvm topic branch and kvm-ppc-fixes to get a better base
s390:
- Initial version of AP crypto virtualization via vfio-mdev
- Improvement for vfio-ap
- Set the host program identifier
- Optimize page table locking
x86:
- Enable nested virtualization by default
- Implement Hyper-V IPI hypercalls
- Improve #PF and #DB handling
- Allow guests to use Enlightened VMCS
- Add migration selftests for VMCS and Enlightened VMCS
- Allow coalesced PIO accesses
- Add an option to perform nested VMCS host state consistency check
through hardware
- Automatic tuning of lapic_timer_advance_ns
- Many fixes, minor improvements, and cleanups
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJb0FINAAoJEED/6hsPKofoI60IAJRS3vOAQ9Fav8cJsO1oBHcX
3+NexfnBke1bzrjIR3SUcHKGZbdnVPNZc+Q4JjIbPpPmmOMU5jc9BC1dmd5f4Vzh
BMnQ0yCvgFv3A3fy/Icx1Z8NJppxosdmqdQLrQrNo8aD3cjnqY2yQixdXrAfzLzw
XEgKdIFCCz8oVN/C9TT4wwJn6l9OE7BM5bMKGFy5VNXzMu7t64UDOLbbjZxNgi1g
teYvfVGdt5mH0N7b2GPPWRbJmgnz5ygVVpVNQUEFrdKZoCm6r5u9d19N+RRXAwan
ZYFj10W2T8pJOUf3tryev4V33X7MRQitfJBo4tP5hZfi9uRX89np5zP1CFE7AtY=
=yEPW
-----END PGP SIGNATURE-----
Merge tag 'kvm-4.20-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Radim Krčmář:
"ARM:
- Improved guest IPA space support (32 to 52 bits)
- RAS event delivery for 32bit
- PMU fixes
- Guest entry hardening
- Various cleanups
- Port of dirty_log_test selftest
PPC:
- Nested HV KVM support for radix guests on POWER9. The performance
is much better than with PR KVM. Migration and arbitrary level of
nesting is supported.
- Disable nested HV-KVM on early POWER9 chips that need a particular
hardware bug workaround
- One VM per core mode to prevent potential data leaks
- PCI pass-through optimization
- merge ppc-kvm topic branch and kvm-ppc-fixes to get a better base
s390:
- Initial version of AP crypto virtualization via vfio-mdev
- Improvement for vfio-ap
- Set the host program identifier
- Optimize page table locking
x86:
- Enable nested virtualization by default
- Implement Hyper-V IPI hypercalls
- Improve #PF and #DB handling
- Allow guests to use Enlightened VMCS
- Add migration selftests for VMCS and Enlightened VMCS
- Allow coalesced PIO accesses
- Add an option to perform nested VMCS host state consistency check
through hardware
- Automatic tuning of lapic_timer_advance_ns
- Many fixes, minor improvements, and cleanups"
* tag 'kvm-4.20-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
KVM/nVMX: Do not validate that posted_intr_desc_addr is page aligned
Revert "kvm: x86: optimize dr6 restore"
KVM: PPC: Optimize clearing TCEs for sparse tables
x86/kvm/nVMX: tweak shadow fields
selftests/kvm: add missing executables to .gitignore
KVM: arm64: Safety check PSTATE when entering guest and handle IL
KVM: PPC: Book3S HV: Don't use streamlined entry path on early POWER9 chips
arm/arm64: KVM: Enable 32 bits kvm vcpu events support
arm/arm64: KVM: Rename function kvm_arch_dev_ioctl_check_extension()
KVM: arm64: Fix caching of host MDCR_EL2 value
KVM: VMX: enable nested virtualization by default
KVM/x86: Use 32bit xor to clear registers in svm.c
kvm: x86: Introduce KVM_CAP_EXCEPTION_PAYLOAD
kvm: vmx: Defer setting of DR6 until #DB delivery
kvm: x86: Defer setting of CR2 until #PF delivery
kvm: x86: Add payload operands to kvm_multiple_exception
kvm: x86: Add exception payload fields to kvm_vcpu_events
kvm: x86: Add has_payload and payload to kvm_queued_exception
KVM: Documentation: Fix omission in struct kvm_vcpu_events
KVM: selftests: add Enlightened VMCS test
...
-----BEGIN PGP SIGNATURE-----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=58I4
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- Fix ASPM link_state teardown on removal (Lukas Wunner)
- Fix misleading _OSC ASPM message (Sinan Kaya)
- Make _OSC optional for PCI (Sinan Kaya)
- Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set
(Patrick Talbert)
- Remove x86 and arm64 node-local allocation for host bridge structures
(Punit Agrawal)
- Pay attention to device-specific _PXM node values (Jonathan Cameron)
- Support new Immediate Readiness bit (Felipe Balbi)
- Differentiate between pciehp surprise and safe removal (Lukas Wunner)
- Remove unnecessary pciehp includes (Lukas Wunner)
- Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner)
- Tolerate PCIe Slot Presence Detect being hardwired to zero to
workaround broken hardware, e.g., the Wilocity switch/wireless device
(Lukas Wunner)
- Unify pciehp controller & slot structs (Lukas Wunner)
- Constify hotplug_slot_ops (Lukas Wunner)
- Drop hotplug_slot_info (Lukas Wunner)
- Embed hotplug_slot struct into users instead of allocating it
separately (Lukas Wunner)
- Initialize PCIe port service drivers directly instead of relying on
initcall ordering (Keith Busch)
- Restore PCI config state after a slot reset (Keith Busch)
- Save/restore DPC config state along with other PCI config state
(Keith Busch)
- Reference count devices during AER handling to avoid race issue with
concurrent hot removal (Keith Busch)
- If an Upstream Port reports ERR_FATAL, don't try to read the Port's
config space because it is probably unreachable (Keith Busch)
- During error handling, use slot-specific reset instead of secondary
bus reset to avoid link up/down issues on hotplug ports (Keith Busch)
- Restore previous AER/DPC handling that does not remove and
re-enumerate devices on ERR_FATAL (Keith Busch)
- Notify all drivers that may be affected by error recovery resets
(Keith Busch)
- Always generate error recovery uevents, even if a driver doesn't have
error callbacks (Keith Busch)
- Make PCIe link active reporting detection generic (Keith Busch)
- Support D3cold in PCIe hierarchies during system sleep and runtime,
including hotplug and Thunderbolt ports (Mika Westerberg)
- Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots
are empty or occupied (Jon Derrick)
- Remove duplicated include from pci/pcie/err.c and unused variable
from cpqphp (YueHaibing)
- Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza
Pawandeep)
- Uninline PCI bus accessors for better ftracing (Keith Busch)
- Remove unused AER Root Port .error_resume method (Keith Busch)
- Use kfifo in AER instead of a local version (Keith Busch)
- Use threaded IRQ in AER bottom half (Keith Busch)
- Use managed resources in AER core (Keith Busch)
- Reuse pcie_port_find_device() for AER injection (Keith Busch)
- Abstract AER interrupt handling to disconnect error injection (Keith
Busch)
- Refactor AER injection callbacks to simplify future improvments
(Keith Busch)
- Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski)
- Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko)
- Add switch fall-through annotations (Gustavo A. R. Silva)
- Remove unused Switchtec quirk variable (Joshua Abraham)
- Fix pci.c kernel-doc warning (Randy Dunlap)
- Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig)
- Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng)
- Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid
useless dmesg errors (Logan Gunthorpe)
- Update Switchtec NTB documentation (Wesley Yung)
- Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz)
- Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang)
- Add PCI support for peer-to-peer DMA (Logan Gunthorpe)
- Add sysfs group for PCI peer-to-peer memory statistics (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA scatterlist mapping interface (Logan
Gunthorpe)
- Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA driver writer's documentation (Logan
Gunthorpe)
- Add block layer flag to indicate driver support for PCI peer-to-peer
DMA (Logan Gunthorpe)
- Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P
memory (Logan Gunthorpe)
- Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan
Gunthorpe)
- Add nvme-pci support for PCI peer-to-peer memory in requests (Logan
Gunthorpe)
- Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise,
Christoph Hellwig, Logan Gunthorpe)
- Cache VF config space size to optimize enumeration of many VFs
(KarimAllah Ahmed)
- Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas)
- Fix VMD AERSID quirk Device ID matching (Jon Derrick)
- Fix Cadence PHY handling during probe (Alan Douglas)
- Signal Cadence Endpoint interrupts via AXI region 0 instead of last
region (Alan Douglas)
- Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan
Douglas)
- Remove redundant controller tests for "device_type == pci" (Rob
Herring)
- Document R-Car E3 (R8A77990) bindings (Tho Vu)
- Add device tree support for R-Car r8a7744 (Biju Das)
- Drop unused mvebu PCIe capability code (Thomas Petazzoni)
- Add shared PCI bridge emulation code (Thomas Petazzoni)
- Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni)
- Add aardvark Root Port emulation (Thomas Petazzoni)
- Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach)
- Add initial power management for i.MX7 (Leonard Crestez)
- Add PME_Turn_Off support for i.MX7 (Leonard Crestez)
- Fix qcom runtime power management error handling (Bjorn Andersson)
- Update TI dra7xx unaligned access errata workaround for host mode as
well as endpoint mode (Vignesh R)
- Fix kirin section mismatch warning (Nathan Chancellor)
- Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare)
- Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I)
- Update Keystone to use MRRS quirk for host bridge instead of open
coding (Kishon Vijay Abraham I)
- Refactor Keystone link establishment (Kishon Vijay Abraham I)
- Simplify and speed up Keystone link training (Kishon Vijay Abraham I)
- Remove unused Keystone host_init argument (Kishon Vijay Abraham I)
- Merge Keystone driver files into one (Kishon Vijay Abraham I)
- Remove redundant Keystone platform_set_drvdata() (Kishon Vijay
Abraham I)
- Rename Keystone functions for uniformity (Kishon Vijay Abraham I)
- Add Keystone device control module DT binding (Kishon Vijay Abraham
I)
- Use SYSCON API to get Keystone control module device IDs (Kishon
Vijay Abraham I)
- Clean up Keystone PHY handling (Kishon Vijay Abraham I)
- Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I)
- Clean up Keystone config space access checks (Kishon Vijay Abraham I)
- Get Keystone outbound window count from DT (Kishon Vijay Abraham I)
- Clean up Keystone outbound window configuration (Kishon Vijay Abraham
I)
- Clean up Keystone DBI setup (Kishon Vijay Abraham I)
- Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I)
- Fix Keystone IRQ status checking (Kishon Vijay Abraham I)
- Add debug messages for all Keystone errors (Kishon Vijay Abraham I)
- Clean up Keystone includes and macros (Kishon Vijay Abraham I)
- Fix Mediatek unchecked return value from devm_pci_remap_iospace()
(Gustavo A. R. Silva)
- Fix Mediatek endpoint/port matching logic (Honghui Zhang)
- Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui
Zhang)
- Remove redundant Mediatek PM domain check (Honghui Zhang)
- Convert Mediatek to pci_host_probe() (Honghui Zhang)
- Fix Mediatek MSI enablement (Honghui Zhang)
- Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang)
- Add Mediatek loadable module support (Honghui Zhang)
- Detach VMD resources after stopping root bus to prevent orphan
resources (Jon Derrick)
- Convert pcitest build process to that used by other tools (iio, perf,
etc) (Gustavo Pimentel)
* tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
PCI/AER: Refactor error injection fallbacks
PCI/AER: Abstract AER interrupt handling
PCI/AER: Reuse existing pcie_port_find_device() interface
PCI/AER: Use managed resource allocations
PCI: pcie: Remove redundant 'default n' from Kconfig
PCI: aardvark: Implement emulated root PCI bridge config space
PCI: mvebu: Convert to PCI emulated bridge config space
PCI: mvebu: Drop unused PCI express capability code
PCI: Introduce PCI bridge emulated config space common logic
PCI: vmd: Detach resources after stopping root bus
nvmet: Optionally use PCI P2P memory
nvmet: Introduce helper functions to allocate and free request SGLs
nvme-pci: Add support for P2P memory in requests
nvme-pci: Use PCI p2pmem subsystem to manage the CMB
IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]()
block: Add PCI P2P flag for request queue
PCI/P2PDMA: Add P2P DMA driver writer's documentation
docs-rst: Add a new directory for PCI documentation
PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers
PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset
...
Pull networking updates from David Miller:
1) Add VF IPSEC offload support in ixgbe, from Shannon Nelson.
2) Add zero-copy AF_XDP support to i40e, from Björn Töpel.
3) All in-tree drivers are converted to {g,s}et_link_ksettings() so we
can get rid of the {g,s}et_settings ethtool callbacks, from Michal
Kubecek.
4) Add software timestamping to veth driver, from Michael Walle.
5) More work to make packet classifiers and actions lockless, from Vlad
Buslov.
6) Support sticky FDB entries in bridge, from Nikolay Aleksandrov.
7) Add ipv6 version of IP_MULTICAST_ALL sockopt, from Andre Naujoks.
8) Support batching of XDP buffers in vhost_net, from Jason Wang.
9) Add flow dissector BPF hook, from Petar Penkov.
10) i40e vf --> generic iavf conversion, from Jesse Brandeburg.
11) Add NLA_REJECT netlink attribute policy type, to signal when users
provide attributes in situations which don't make sense. From
Johannes Berg.
12) Switch TCP and fair-queue scheduler over to earliest departure time
model. From Eric Dumazet.
13) Improve guest receive performance by doing rx busy polling in tx
path of vhost networking driver, from Tonghao Zhang.
14) Add per-cgroup local storage to bpf
15) Add reference tracking to BPF, from Joe Stringer. The verifier can
now make sure that references taken to objects are properly released
by the program.
16) Support in-place encryption in TLS, from Vakul Garg.
17) Add new taprio packet scheduler, from Vinicius Costa Gomes.
18) Lots of selftests additions, too numerous to mention one by one here
but all of which are very much appreciated.
19) Support offloading of eBPF programs containing BPF to BPF calls in
nfp driver, frm Quentin Monnet.
20) Move dpaa2_ptp driver out of staging, from Yangbo Lu.
21) Lots of u32 classifier cleanups and simplifications, from Al Viro.
22) Add new strict versions of netlink message parsers, and enable them
for some situations. From David Ahern.
23) Evict neighbour entries on carrier down, also from David Ahern.
24) Support BPF sk_msg verdict programs with kTLS, from Daniel Borkmann
and John Fastabend.
25) Add support for filtering route dumps, from David Ahern.
26) New igc Intel driver for 2.5G parts, from Sasha Neftin et al.
27) Allow vxlan enslavement to bridges in mlxsw driver, from Ido
Schimmel.
28) Add queue and stack map types to eBPF, from Mauricio Vasquez B.
29) Add back byte-queue-limit support to r8169, with all the bug fixes
in other areas of the driver it works now! From Florian Westphal and
Heiner Kallweit.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2147 commits)
tcp: add tcp_reset_xmit_timer() helper
qed: Fix static checker warning
Revert "be2net: remove desc field from be_eq_obj"
Revert "net: simplify sock_poll_wait"
net: socionext: Reset tx queue in ndo_stop
net: socionext: Add dummy PHY register read in phy_write()
net: socionext: Stop PHY before resetting netsec
net: stmmac: Set OWN bit for jumbo frames
arm64: dts: stratix10: Support Ethernet Jumbo frame
tls: Add maintainers
net: ethernet: ti: cpsw: unsync mcast entries while switch promisc mode
octeontx2-af: Support for NIXLF's UCAST/PROMISC/ALLMULTI modes
octeontx2-af: Support for setting MAC address
octeontx2-af: Support for changing RSS algorithm
octeontx2-af: NIX Rx flowkey configuration for RSS
octeontx2-af: Install ucast and bcast pkt forwarding rules
octeontx2-af: Add LMAC channel info to NIXLF_ALLOC response
octeontx2-af: NPC MCAM and LDATA extract minimal configuration
octeontx2-af: Enable packet length and csum validation
octeontx2-af: Support for VTAG strip and capture
...
- Improved access control for the zcrypt driver, multiple device nodes
can now be created with different access control lists
- Extend the pkey API to provide random protected keys, this is useful
for encrypted swap device with ephemeral protected keys
- Add support for virtually mapped kernel stacks
- Rework the early boot code, this moves the memory detection into the
boot code that runs prior to decompression.
- Add KASAN support
- Bug fixes and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJbzXKpAAoJEDjwexyKj9rg98YH/jZ5/kEYV44JsACroTNBC782
6QLCvoCvSgXUAqRwnIfnxrcjrUVNW2aK6rOSsI/I8rQDsSA3boJ7FimoEI2BsUZG
dcMy0hC47AYB7yKREQX3gdDEj8f0bn8v2ize5F6gwLkIx0A+aBUSivRQeYMaF8sn
N/5OkSJwjCb+ZkNmDa3SHif+hC5+iL+q1hfuBdQkeCBok9pAqhyosRkgLe8CQgUV
HGrvaWJ4FudIpg4tu2jL2OsNoZFX2pK5d+Up886+KGKQEUfiXKYtdmzX17Vd7PIk
Vkf7EWUipzIA7UtrJ6pljoFsrNa+83jm4j5Dgy0ohadCVUBYLORte3yEl4P1EoM=
=MMf0
-----END PGP SIGNATURE-----
Merge tag 's390-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
- Improved access control for the zcrypt driver, multiple device nodes
can now be created with different access control lists
- Extend the pkey API to provide random protected keys, this is useful
for encrypted swap device with ephemeral protected keys
- Add support for virtually mapped kernel stacks
- Rework the early boot code, this moves the memory detection into the
boot code that runs prior to decompression.
- Add KASAN support
- Bug fixes and cleanups
* tag 's390-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (83 commits)
s390/pkey: move pckmo subfunction available checks away from module init
s390/kasan: support preemptible kernel build
s390/pkey: Load pkey kernel module automatically
s390/perf: Return error when debug_register fails
s390/sthyi: Fix machine name validity indication
s390/zcrypt: fix broken zcrypt_send_cprb in-kernel api function
s390/vmalloc: fix VMALLOC_START calculation
s390/mem_detect: add missing include
s390/dumpstack: print psw mask and address again
s390/crypto: Enhance paes cipher to accept variable length key material
s390/pkey: Introduce new API for transforming key blobs
s390/pkey: Introduce new API for random protected key verification
s390/pkey: Add sysfs attributes to emit secure key blobs
s390/pkey: Add sysfs attributes to emit protected key blobs
s390/pkey: Define protected key blob format
s390/pkey: Introduce new API for random protected key generation
s390/zcrypt: add ap_adapter_mask sysfs attribute
s390/zcrypt: provide apfs failure code on type 86 error reply
s390/zcrypt: zcrypt device driver cleanup
s390/kasan: add support for mem= kernel parameter
...
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAlvNQKgQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgps+8D/9Iy6YIeoPwN10gYsqIh0P2fS3wKzL3kiww
3vFsWO78PzgLxUlNmB7teLtNFc/R5mi8becZmAdvs9za5YFZk56o3Ifv1x+e+z00
VY1/gxhiJD6suLeJ6lECnERGDaiWOZVRMo2TE17vxYGW6GGaa0Ts6PUUXmpla1u5
WKctgt0Qv9WVNyiIdLdeHqzKJwsSSwNTt8fK7eFhy3x8e0CwJr+GtXckbbW3LFkY
lug0npsTli3EmEPMovZhd25SjZmTk5GTM+ADZQ7Tnv5KXoDWB9jn6TcCSAi3G+5d
5WUVwfnDyYJiH8qvlg5tRJ690muIy3xMOmpr7QBQ0YnR/LQ3EW+1CVfqD+qimgLH
TXzlREXQpBP3YlxSDS5nddz4o5z84GZmC9B/43ujPaZKIQ6eBXYdkmQH7tPtSugm
C6VGomR5tHotjxIiAsexh/5hAus+wW8bObKGTPTyINT0ub3XNclwCKLh26CgI9ie
WvbS9g3j/KPvu/7s6weZpgD+cks0YdWe/XdXXxiHwsGI9h3J2aJna5RQt1rKWDm5
wGCgbc/B8eSwiWx+GXlqdB9/Dy/bGXOnSTDnKpEVl1f5zNjeLwUKXbjvkMefWs4m
jEIcquuDETORY+ZYEfa5YbmS4Lhskr0kzMVTVkZ++81tAWpSCU9Xh3IHrR8TNpt+
J0oh0FHBDg==
=LRTT
-----END PGP SIGNATURE-----
Merge tag 'for-4.20/block-20181021' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
"This is the main pull request for block changes for 4.20. This
contains:
- Series enabling runtime PM for blk-mq (Bart).
- Two pull requests from Christoph for NVMe, with items such as;
- Better AEN tracking
- Multipath improvements
- RDMA fixes
- Rework of FC for target removal
- Fixes for issues identified by static checkers
- Fabric cleanups, as prep for TCP transport
- Various cleanups and bug fixes
- Block merging cleanups (Christoph)
- Conversion of drivers to generic DMA mapping API (Christoph)
- Series fixing ref count issues with blkcg (Dennis)
- Series improving BFQ heuristics (Paolo, et al)
- Series improving heuristics for the Kyber IO scheduler (Omar)
- Removal of dangerous bio_rewind_iter() API (Ming)
- Apply single queue IPI redirection logic to blk-mq (Ming)
- Set of fixes and improvements for bcache (Coly et al)
- Series closing a hotplug race with sysfs group attributes (Hannes)
- Set of patches for lightnvm:
- pblk trace support (Hans)
- SPDX license header update (Javier)
- Tons of refactoring patches to cleanly abstract the 1.2 and 2.0
specs behind a common core interface. (Javier, Matias)
- Enable pblk to use a common interface to retrieve chunk metadata
(Matias)
- Bug fixes (Various)
- Set of fixes and updates to the blk IO latency target (Josef)
- blk-mq queue number updates fixes (Jianchao)
- Convert a bunch of drivers from the old legacy IO interface to
blk-mq. This will conclude with the removal of the legacy IO
interface itself in 4.21, with the rest of the drivers (me, Omar)
- Removal of the DAC960 driver. The SCSI tree will introduce two
replacement drivers for this (Hannes)"
* tag 'for-4.20/block-20181021' of git://git.kernel.dk/linux-block: (204 commits)
block: setup bounce bio_sets properly
blkcg: reassociate bios when make_request() is called recursively
blkcg: fix edge case for blk_get_rl() under memory pressure
nvme-fabrics: move controller options matching to fabrics
nvme-rdma: always have a valid trsvcid
mtip32xx: fully switch to the generic DMA API
rsxx: switch to the generic DMA API
umem: switch to the generic DMA API
sx8: switch to the generic DMA API
sx8: remove dead IF_64BIT_DMA_IS_POSSIBLE code
skd: switch to the generic DMA API
ubd: remove use of blk_rq_map_sg
nvme-pci: remove duplicate check
drivers/block: Remove DAC960 driver
nvme-pci: fix hot removal during error handling
nvmet-fcloop: suppress a compiler warning
nvme-core: make implicit seed truncation explicit
nvmet-fc: fix kernel-doc headers
nvme-fc: rework the request initialization code
nvme-fc: introduce struct nvme_fcp_op_w_sgl
...
The init of the pkey module currently fails if the pckmo instruction
or the subfunctions are not available. However, customers may
restrict their LPAR to switch off exactly these functions and work
with secure key only. So it is a valid case to have the pkey module
active and use it for secure key to protected key transfer only.
This patch moves the pckmo subfunction check from the pkey module init
function into the internal function where the pckmo instruction is
called. So now only on invocation of the pckmo instruction the check
for the required subfunction is done. If not available EOPNOTSUPP is
returned to the caller.
The check for having the pckmo instruction available is still done
during module init. This instruction came in with MSA 3 together with
the basic set of kmc instructions needed to work with protected keys.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
With the recent enhancements of the pkey kernel module,
the pkey kernel module should be loaded automatically
during system startup, if MSA is available.
When used for swap device encryption with random protected
keys, pkey must be loaded before /etc/crypttab is processed,
otherwise the sysfs attributes to read the key from are
not available.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
With the new multi zcrypt device node support there came
in a code rework which broke the in-kernel api function
zcrypt_send_cprb(). This function is used by the pkey kernel
module and as an effect, transforming a secure key into a
protected key did not work any more.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Conflicts were easy to resolve using immediate context mostly,
except the cls_u32.c one where I simply too the entire HEAD
chunk.
Signed-off-by: David S. Miller <davem@davemloft.net>
Except for the new HW header id, this works just like TSO6 on L3 devices
and reuses all the existing data path support in qeth_xmit().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds TSO6 support for L3 qeth devices.
Just like for standard IPv6 traffic, TSO6 doesn't use IP offload and
thus runs over the normal qeth_xmit() path.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TSO6 requires the full programming sequence, and not just a simple
START command. This implements the additional ENABLE command, and adds
some sanity checks that were missing for the START command.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for IPv6 TSO, turn the protocol version into a parameter
for the TSO control code.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The few callers can just use dma_set_max_seg_size ()directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The two callers can just use dma_set_seg_boundary() directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Four more patches for 4.19
- Fix resume after suspend-to-disk if resume-CPU != suspend-CPU
- Fix vfio-ccw check for pinned pages
- Two patches to avoid a usercopy-whitelist warning in vfio-ccw
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJbvEC8AAoJEDjwexyKj9rg9vEIANHnOfx9qzM6grkvc3hH4kTR
VSZ2kZE+bQOqmxUF2XiOuBZkjX6EWZKmWwL8p+5uIydxkqmUvDtG2hYqo7GKkddP
e3Qze+pSNz4uU+LT4t3wOUJfL1R1Pgrdea7rSr1DwbQQ8K4FiEImMr9pDfVPaHjq
XDnkpIwavG1s4Lxlkc6IbGHX0tYt2wp2lXO/QEp8sLjqAdUBnOiZhA3Ssy8veS+M
Q0u0Vgara5enhq9UDevr6e+jJ5w1qT4SZ0T38eif4FJSJMSZpWFe9qI92gKCIv9U
3oBZM/Qof0He9ow/Yl57rgxLmt8VGXiO5rL+VfT7j0H6kGkmao79SCvgyon0R+M=
=/FjH
-----END PGP SIGNATURE-----
Merge tag 's390-4.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Martin writes:
"s390 fixes for 4.19-rc8
Four more patches for 4.19:
- Fix resume after suspend-to-disk if resume-CPU != suspend-CPU
- Fix vfio-ccw check for pinned pages
- Two patches to avoid a usercopy-whitelist warning in vfio-ccw"
* tag 's390-4.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: Fix how vfio-ccw checks pinned pages
s390/cio: Refactor alloc of ccw_io_region
s390/cio: Convert ccw_io_region to pointer
s390/hibernate: fix error handling when suspend cpu != resume cpu
Introduce a new ioctl API and in-kernel API to transform
a variable length key blob of any supported type into a
protected key.
Transforming a secure key blob uses the already existing
function pkey_sec2protk().
Transforming a protected key blob also verifies if the
protected key is still valid. If not, -ENODEV is returned.
Both APIs are described in detail in the header files
arch/s390/include/asm/pkey.h and arch/s390/include/uapi/asm/pkey.h.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Introduce a new ioctl API and in-kernel API to verify if a
random protected key is still valid. A protected key is
invalid when its wrapping key verification pattern does not
match the verification pattern of the LPAR. Each time an LPAR
is activated, a new LPAR wrapping key is generated and the
wrapping key verification pattern is updated.
Both APIs are described in detail in the header files
arch/s390/include/asm/pkey.h and arch/s390/include/uapi/asm/pkey.h.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add binary read-only sysfs attributes for the pkey module
that can be used to read random ccadata secure keys from.
Keys are read from these attributes using a cat-like interface.
A typical use case for those keys is to encrypt a swap device
using the paes cipher. During processing of /etc/crypttab, the
random random ccadata secure key to encrypt the swap device is
read from one of the attributes.
The following attributes are added:
ccadata/aes_128
ccadata/aes_192
ccadata/aes_256
ccadata/aes_128_xts
ccadata/aes_256_xts
Each attribute emits a secure key blob for the corresponding
key size and cipher mode.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add binary read-only sysfs attributes for the pkey module
that can be used to read random protected keys from.
Keys are read from these attributes using a cat-like interface.
A typical use case for those keys is to encrypt a swap device
using the paes cipher. During processing of /etc/crypttab, the
random protected key to encrypt the swap device is read from
one of the attributes.
The following attributes are added:
protkey/aes_128
protkey/aes_192
protkey/aes_256
protkey/aes_128_xts
protkey/aes_256_xts
Each attribute emits a protected key blob for the corresponding
key size and cipher mode.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Define a new protected key blob format. Protected key
blobs use a type of 0x00, to be distinguished from other
CCA key blobs. CCA defines type 0x00 as NULL key blob,
but pkey will never use NULL keys anyway, so it is save
to reuse this type. Using another so far undefined type
value would introduce the risk that sometimes in the
future CCA defines this so far unassigned type for a
future key blob.
Also add defines for the key token types and versions,
and use them instead of hard coded hex values.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This patch introduces a new ioctl API and in-kernel API to
generate a random protected key. The protected key is generated
in a way that the effective clear key is never exposed in clear.
Both APIs are described in detail in the header files
arch/s390/include/asm/pkey.h and arch/s390/include/uapi/asm/pkey.h.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This patch provides a new sysfs attribute file
/sys/bus/ap/ap_adapter_mask. This read-only attribute
refrects the apm field as it is found in the PQAP(QCI)
crypto info.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The apfs field (AP final status) is set on transport
protocol failures (reply code 0x90) for type 86 replies.
For CCA cprbs this value is copied into the xcrb status
field which gives userspace a hint for the failure reason.
However, for EP11 cprbs there is no such status field
in the xcrb struct. So now regardless of the request
type, if a reply type 86 with transport protocol failure
is seen, the apfs value is printed as part of the debug
message. So the user has a chance to see the apfs value
without using a special build kernel.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Some cleanup in the s390 zcrypt device driver:
- Removed fragments of pcixx crypto card code. This code
can't be reached anymore because the hardware detection
function does not recognize crypto cards < CEX2 since
commit f56545430736 ("s390/zcrypt: Introduce QACT support
for AP bus devices.")
- Rename of some files and driver names which where still
reflecting pcixx support to cex2a/cex2c.
- Removed all the zcrypt version strings in the file headers.
There is only one place left - the zcrypt.h header file is
now the only place for zcrypt device driver version info.
- Zcrypt version pump up from 2.2.0 to 2.2.1.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Instrumented C code cannot run without the kasan shadow area. Exempt
source code files from kasan which are running before / used during
kasan initialization.
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Introduce sclp_early_get_hsa_size function to be used during early
memory detection. This function allows to find a memory limit imposed
during zfcpdump.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
In a situation when other memory detection methods are not available
(no SCLP and no z/VM diag260), continuous online memory is assumed.
Replacing tprot loop with faster binary search, as only online memory
end has to be found.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
SCLP storage info allows to detect continuous and non-continuous online
memory under LPAR, z/VM and KVM, when standby memory is defined.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Move memory detection to early boot phase. To store online memory
regions "struct mem_detect_info" has been introduced together with
for_each_mem_detect_block iterator. mem_detect_info is later converted
to memblock.
Also introduces sclp_early_get_meminfo function to get maximum physical
memory and maximum increment number.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
To enable early online memory detection sclp_early_read_info has
been moved to sclp_early_core.c. sclp_info_sccb has been made a part
of .boot.data, which allows to reuse it later during early kernel
startup and make sclp_early_read_info call just once.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Architecture documentation suggests that hsa_size has been available in
the read info since the list-directed ipl dump has been introduced. By
using this value few early sclp calls could be avoided.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
With CONFIG_VMAP_STACK=y the stack is allocated from the vmalloc space.
Data structures passed to a hardware or a hypervisor interface that
requires V=R can not be allocated on the stack anymore.
Use kmalloc to get memory for the appldata_parameter_list and
appldata_product_id structures.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
In preparation for CONFIG_VMAP_STACK=y move the allocation of the
struct appldata_parameter_list to the caller of appldata_asm().
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
no functional change, just hygiene.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Provide function to find a ccwgroup device by its busid.
Acked-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This patch is an extension to the zcrypt device driver to provide,
support and maintain multiple zcrypt device nodes. The individual
zcrypt device nodes can be restricted in terms of crypto cards,
domains and available ioctls. Such a device node can be used as a
base for container solutions like docker to control and restrict
the access to crypto resources.
The handling is done with a new sysfs subdir /sys/class/zcrypt.
Echoing a name (or an empty sting) into the attribute "create" creates
a new zcrypt device node. In /sys/class/zcrypt a new link will appear
which points to the sysfs device tree of this new device. The
attribute files "ioctlmask", "apmask" and "aqmask" in this directory
are used to customize this new zcrypt device node instance. Finally
the zcrypt device node can be destroyed by echoing the name into
/sys/class/zcrypt/destroy. The internal structs holding the device
info are reference counted - so a destroy will not hard remove a
device but only marks it as removable when the reference counter drops
to zero.
The mask values are bitmaps in big endian order starting with bit 0.
So adapter number 0 is the leftmost bit, mask is 0x8000... The sysfs
attributes accept 2 different formats:
* Absolute hex string starting with 0x like "0x12345678" does set
the mask starting from left to right. If the given string is shorter
than the mask it is padded with 0s on the right. If the string is
longer than the mask an error comes back (EINVAL).
* Relative format - a concatenation (done with ',') of the
terms +<bitnr>[-<bitnr>] or -<bitnr>[-<bitnr>]. <bitnr> may be any
valid number (hex, decimal or octal) in the range 0...255. Here are
some examples:
"+0-15,+32,-128,-0xFF"
"-0-255,+1-16,+0x128"
"+1,+2,+3,+4,-5,-7-10"
A simple usage examples:
# create new zcrypt device 'my_zcrypt':
echo "my_zcrypt" >/sys/class/zcrypt/create
# go into the device dir of this new device
echo "my_zcrypt" >create
cd my_zcrypt/
ls -l
total 0
-rw-r--r-- 1 root root 4096 Jul 20 15:23 apmask
-rw-r--r-- 1 root root 4096 Jul 20 15:23 aqmask
-r--r--r-- 1 root root 4096 Jul 20 15:23 dev
-rw-r--r-- 1 root root 4096 Jul 20 15:23 ioctlmask
lrwxrwxrwx 1 root root 0 Jul 20 15:23 subsystem -> ../../../../class/zcrypt
...
# customize this zcrypt node clone
# enable only adapter 0 and 2
echo "0xa0" >apmask
# enable only domain 6
echo "+6" >aqmask
# enable all 256 ioctls
echo "+0-255" >ioctls
# now the /dev/my_zcrypt may be used
# finally destroy it
echo "my_zcrypt" >/sys/class/zcrypt/destroy
Please note that a very similar 'filtering behavior' also applies to
the parent z90crypt device. The two mask attributes apmask and aqmask
in /sys/bus/ap act the very same for the z90crypt device node. However
the implementation here is totally different as the ap bus acts on
bind/unbind of queue devices and associated drivers but the effect is
still the same. So there are two filters active for each additional
zcrypt device node: The adapter/domain needs to be enabled on the ap
bus level and it needs to be active on the zcrypt device node level.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
We replace the vfio_ap_mdev_copy_masks() by the new
kvm_arch_crypto_set_masks() to be able to use the standard
KVM tracing system.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <1538728270-10340-3-git-send-email-pmorel@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Minor conflict in net/core/rtnetlink.c, David Ahern's bug fix in 'net'
overlapped the renaming of a netlink attribute in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
We have two nested loops to check the entries within the pfn_array_table
arrays. But we mistakenly use the outer array as an index in our check,
and completely ignore the indexing performed by the inner loop.
Cc: stable@vger.kernel.org
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20181002010235.42483-1-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
-----BEGIN PGP SIGNATURE-----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=dMl4
-----END PGP SIGNATURE-----
Merge tag 'v4.19-rc6' into for-4.20/block
Merge -rc6 in, for two reasons:
1) Resolve a trivial conflict in the blk-mq-tag.c documentation
2) A few important regression fixes went into upstream directly, so
they aren't in the 4.20 branch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* tag 'v4.19-rc6': (780 commits)
Linux 4.19-rc6
MAINTAINERS: fix reference to moved drivers/{misc => auxdisplay}/panel.c
cpufreq: qcom-kryo: Fix section annotations
perf/core: Add sanity check to deal with pinned event failure
xen/blkfront: correct purging of persistent grants
Revert "xen/blkfront: When purging persistent grants, keep them in the buffer"
selftests/powerpc: Fix Makefiles for headers_install change
blk-mq: I/O and timer unplugs are inverted in blktrace
dax: Fix deadlock in dax_lock_mapping_entry()
x86/boot: Fix kexec booting failure in the SEV bit detection code
bcache: add separate workqueue for journal_write to avoid deadlock
drm/amd/display: Fix Edid emulation for linux
drm/amd/display: Fix Vega10 lightup on S3 resume
drm/amdgpu: Fix vce work queue was not cancelled when suspend
Revert "drm/panel: Add device_link from panel device to DRM device"
xen/blkfront: When purging persistent grants, keep them in the buffer
clocksource/drivers/timer-atmel-pit: Properly handle error cases
block: fix deadline elevator drain for zoned block devices
ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge
drm/syncobj: Don't leak fences when WAIT_FOR_SUBMIT is set
...
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Functions qeth_get_ipa_msg and qeth_get_ipa_cmd_name are modifying
the last member of global arrays without any locking that I can see.
If two instances of either function are running at the same time,
it could cause a race ultimately leading to an array overrun (the
contents of the last entry of the array is the only guarantee that
the loop will ever stop).
Performing the lookups without modifying the arrays is admittedly
slower (two comparisons per iteration instead of one) but these
are operations which are rare (should only be needed in error
cases or when debugging, not during successful operation) and it
seems still less costly than introducing a mutex to protect the
arrays in question.
As a side bonus, it allows us to declare both arrays as const data.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Julian Wiedmann <jwi@linux.ibm.com>
Cc: Ursula Braun <ubraun@linux.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the common code ARRAY_SIZE macro instead of a private implementation.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update device_add_disk() to take an 'groups' argument so that
individual drivers can register a device with additional sysfs
attributes.
This avoids race condition the driver would otherwise have if these
groups were to be created with sysfs_add_groups().
Signed-off-by: Martin Wilck <martin.wilck@suse.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implements the VFIO_DEVICE_RESET ioctl. This ioctl zeroizes
all of the AP queues assigned to the guest.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20180925231641.4954-15-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's call PAPQ(ZAPQ) to zeroize a queue for each queue configured
for a mediated matrix device when it is released.
Zeroizing a queue resets the queue, clears all pending
messages for the queue entries and disables adapter interruptions
associated with the queue.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20180925231641.4954-14-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Adds support for the VFIO_DEVICE_GET_INFO ioctl to the VFIO
AP Matrix device driver. This is a minimal implementation,
as vfio-ap does not use I/O regions.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20180925231641.4954-13-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Implements the open callback on the mediated matrix device.
The function registers a group notifier to receive notification
of the VFIO_GROUP_NOTIFY_SET_KVM event. When notified,
the vfio_ap device driver will get access to the guest's
kvm structure. The open callback must ensure that only one
mediated device shall be opened per guest.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Pierre Morel <pmorel@linux.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20180925231641.4954-12-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If I attach a vfio-ccw device to my guest, I get the following warning
on the host when the host kernel is CONFIG_HARDENED_USERCOPY=y
[250757.595325] Bad or missing usercopy whitelist? Kernel memory overwrite attempt detected to SLUB object 'dma-kmalloc-512' (offset 64, size 124)!
[250757.595365] WARNING: CPU: 2 PID: 10958 at mm/usercopy.c:81 usercopy_warn+0xac/0xd8
[250757.595369] Modules linked in: kvm vhost_net vhost tap xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack libcrc32c devlink tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables sunrpc dm_multipath s390_trng crc32_vx_s390 ghash_s390 prng aes_s390 des_s390 des_generic sha512_s390 sha1_s390 eadm_sch tape_3590 tape tape_class qeth_l2 qeth ccwgroup vfio_ccw vfio_mdev zcrypt_cex4 mdev vfio_iommu_type1 zcrypt vfio sha256_s390 sha_common zfcp scsi_transport_fc qdio dasd_eckd_mod dasd_mod
[250757.595424] CPU: 2 PID: 10958 Comm: CPU 2/KVM Not tainted 4.18.0-derp #2
[250757.595426] Hardware name: IBM 3906 M05 780 (LPAR)
...snip regs...
[250757.595523] Call Trace:
[250757.595529] ([<0000000000349210>] usercopy_warn+0xa8/0xd8)
[250757.595535] [<000000000032daaa>] __check_heap_object+0xfa/0x160
[250757.595540] [<0000000000349396>] __check_object_size+0x156/0x1d0
[250757.595547] [<000003ff80332d04>] vfio_ccw_mdev_write+0x74/0x148 [vfio_ccw]
[250757.595552] [<000000000034ed12>] __vfs_write+0x3a/0x188
[250757.595556] [<000000000034f040>] vfs_write+0xa8/0x1b8
[250757.595559] [<000000000034f4e6>] ksys_pwrite64+0x86/0xc0
[250757.595568] [<00000000008959a0>] system_call+0xdc/0x2b0
[250757.595570] Last Breaking-Event-Address:
[250757.595573] [<0000000000349210>] usercopy_warn+0xa8/0xd8
While vfio_ccw_mdev_{write|read} validates that the input position/count
does not run over the ccw_io_region struct, the usercopy code that does
copy_{to|from}_user doesn't necessarily know this. It sees the variable
length and gets worried that it's affecting a normal kmalloc'd struct,
and generates the above warning.
Adjust how the ccw_io_region is alloc'd with a whitelist to remove this
warning. The boundary checking will continue to do its thing.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20180921204013.95804-3-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
In the event that we want to change the layout of the ccw_io_region in the
future[1], it might be easier to work with it as a pointer within the
vfio_ccw_private struct rather than an embedded struct.
[1] https://patchwork.kernel.org/comment/22228541/
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20180921204013.95804-2-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Provides a sysfs interface to view the AP matrix configured for the
mediated matrix device.
The relevant sysfs structures are:
/sys/devices/vfio_ap/matrix/
...... [mdev_supported_types]
......... [vfio_ap-passthrough]
............ [devices]
...............[$uuid]
.................. matrix
To view the matrix configured for the mediated matrix device,
print the matrix file:
cat matrix
Below are examples of the output from the above command:
Example 1: Adapters and domains assigned
Assignments:
Adapters 5 and 6
Domains 4 and 71 (0x47)
Output
05.0004
05.0047
06.0004
06.0047
Examples 2: Only adapters assigned
Assignments:
Adapters 5 and 6
Output:
05.
06.
Examples 3: Only domains assigned
Assignments:
Domains 4 and 71 (0x47)
Output:
.0004
.0047
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20180925231641.4954-10-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Provides the sysfs interfaces for:
1. Assigning AP control domains to the mediated matrix device
2. Unassigning AP control domains from a mediated matrix device
3. Displaying the control domains assigned to a mediated matrix
device
The IDs of the AP control domains assigned to the mediated matrix
device are stored in an AP domain mask (ADM). The bits in the ADM,
from most significant to least significant bit, correspond to
AP domain numbers 0 to 255. On some systems, the maximum allowable
domain number may be less than 255 - depending upon the host's
AP configuration - and assignment may be rejected if the input
domain ID exceeds the limit.
When a control domain is assigned, the bit corresponding its domain
ID will be set in the ADM. Likewise, when a domain is unassigned,
the bit corresponding to its domain ID will be cleared in the ADM.
The relevant sysfs structures are:
/sys/devices/vfio_ap/matrix/
...... [mdev_supported_types]
......... [vfio_ap-passthrough]
............ [devices]
...............[$uuid]
.................. assign_control_domain
.................. unassign_control_domain
To assign a control domain to the $uuid mediated matrix device's
ADM, write its domain number to the assign_control_domain file.
To unassign a domain, write its domain number to the
unassign_control_domain file. The domain number is specified
using conventional semantics: If it begins with 0x the number
will be parsed as a hexadecimal (case insensitive) number;
if it begins with 0, it is parsed as an octal number;
otherwise, it will be parsed as a decimal number.
For example, to assign control domain 173 (0xad) to the mediated
matrix device $uuid:
echo 173 > assign_control_domain
or
echo 0255 > assign_control_domain
or
echo 0xad > assign_control_domain
To unassign control domain 173 (0xad):
echo 173 > unassign_control_domain
or
echo 0255 > unassign_control_domain
or
echo 0xad > unassign_control_domain
The assignment will be rejected if the APQI exceeds the maximum
value for an AP domain:
* If the AP Extended Addressing (APXA) facility is installed,
the max value is 255
* Else the max value is 15
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20180925231641.4954-9-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Introduces two new sysfs attributes for the VFIO mediated
matrix device for assigning AP domains to and unassigning
AP domains from a mediated matrix device. The IDs of the
AP domains assigned to the mediated matrix device will be
stored in an AP queue mask (AQM).
The bits in the AQM, from most significant to least
significant bit, correspond to AP queue index (APQI) 0 to
255 (note that an APQI is synonymous with with a domain ID).
On some systems, the maximum allowable domain number may be
less than 255 - depending upon the host's AP configuration -
and assignment may be rejected if the input domain ID exceeds
the limit.
When a domain is assigned, the bit corresponding to the APQI
will be set in the AQM. Likewise, when a domain is unassigned,
the bit corresponding to the APQI will be cleared from the AQM.
In order to successfully assign a domain, the APQNs derived from
the domain ID being assigned and the adapter numbers of all
adapters previously assigned:
1. Must be bound to the vfio_ap device driver.
2. Must not be assigned to any other mediated matrix device.
If there are no adapters assigned to the mdev, then there must
be an AP queue bound to the vfio_ap device driver with an
APQN containing the domain ID (i.e., APQI), otherwise all
adapters subsequently assigned will fail because there will be no
AP queues bound with an APQN containing the APQI.
Assigning or un-assigning an AP domain will also be rejected if
a guest using the mediated matrix device is running.
The relevant sysfs structures are:
/sys/devices/vfio_ap/matrix/
...... [mdev_supported_types]
......... [vfio_ap-passthrough]
............ [devices]
...............[$uuid]
.................. assign_domain
.................. unassign_domain
To assign a domain to the $uuid mediated matrix device,
write the domain's ID to the assign_domain file. To
unassign a domain, write the domain's ID to the
unassign_domain file. The ID is specified using
conventional semantics: If it begins with 0x, the number
will be parsed as a hexadecimal (case insensitive) number;
if it begins with 0, it will be parsed as an octal number;
otherwise, it will be parsed as a decimal number.
For example, to assign domain 173 (0xad) to the mediated matrix
device $uuid:
echo 173 > assign_domain
or
echo 0255 > assign_domain
or
echo 0xad > assign_domain
To unassign domain 173 (0xad):
echo 173 > unassign_domain
or
echo 0255 > unassign_domain
or
echo 0xad > unassign_domain
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20180925231641.4954-8-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Introduces two new sysfs attributes for the VFIO mediated
matrix device for assigning AP adapters to and unassigning
AP adapters from a mediated matrix device. The IDs of the
AP adapters assigned to the mediated matrix device will be
stored in an AP mask (APM).
The bits in the APM, from most significant to least significant
bit, correspond to AP adapter IDs (APID) 0 to 255. On
some systems, the maximum allowable adapter number may be less
than 255 - depending upon the host's AP configuration - and
assignment may be rejected if the input adapter ID exceeds the
limit.
When an adapter is assigned, the bit corresponding to the APID
will be set in the APM. Likewise, when an adapter is
unassigned, the bit corresponding to the APID will be cleared
from the APM.
In order to successfully assign an adapter, the APQNs derived from
the adapter ID being assigned and the queue indexes of all domains
previously assigned:
1. Must be bound to the vfio_ap device driver.
2. Must not be assigned to any other mediated matrix device
If there are no domains assigned to the mdev, then there must
be an AP queue bound to the vfio_ap device driver with an
APQN containing the APID, otherwise all domains
subsequently assigned will fail because there will be no
AP queues bound with an APQN containing the adapter ID.
Assigning or un-assigning an AP adapter will be rejected if
a guest using the mediated matrix device is running.
The relevant sysfs structures are:
/sys/devices/vfio_ap/matrix/
...... [mdev_supported_types]
......... [vfio_ap-passthrough]
............ [devices]
...............[$uuid]
.................. assign_adapter
.................. unassign_adapter
To assign an adapter to the $uuid mediated matrix device's APM,
write the APID to the assign_adapter file. To unassign an adapter,
write the APID to the unassign_adapter file. The APID is specified
using conventional semantics: If it begins with 0x the number will
be parsed as a hexadecimal number; if it begins with a 0 the number
will be parsed as an octal number; otherwise, it will be parsed as a
decimal number.
For example, to assign adapter 173 (0xad) to the mediated matrix
device $uuid:
echo 173 > assign_adapter
or
echo 0xad > assign_adapter
or
echo 0255 > assign_adapter
To unassign adapter 173 (0xad):
echo 173 > unassign_adapter
or
echo 0xad > unassign_adapter
or
echo 0255 > unassign_adapter
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Registers the matrix device created by the VFIO AP device
driver with the VFIO mediated device framework.
Registering the matrix device will create the sysfs
structures needed to create mediated matrix devices
each of which will be used to configure the AP matrix
for a guest and connect it to the VFIO AP device driver.
Registering the matrix device with the VFIO mediated device
framework will create the following sysfs structures:
/sys/devices/vfio_ap/matrix/
...... [mdev_supported_types]
......... [vfio_ap-passthrough]
............ create
To create a mediated device for the AP matrix device, write a UUID
to the create file:
uuidgen > create
A symbolic link to the mediated device's directory will be created in the
devices subdirectory named after the generated $uuid:
/sys/devices/vfio_ap/matrix/
...... [mdev_supported_types]
......... [vfio_ap-passthrough]
............ [devices]
............... [$uuid]
A symbolic link to the mediated device will also be created
in the vfio_ap matrix's directory:
/sys/devices/vfio_ap/matrix/[$uuid]
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <20180925231641.4954-6-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Introduces a new AP device driver. This device driver
is built on the VFIO mediated device framework. The framework
provides sysfs interfaces that facilitate passthrough
access by guests to devices installed on the linux host.
The VFIO AP device driver will serve two purposes:
1. Provide the interfaces to reserve AP devices for exclusive
use by KVM guests. This is accomplished by unbinding the
devices to be reserved for guest usage from the zcrypt
device driver and binding them to the VFIO AP device driver.
2. Implements the functions, callbacks and sysfs attribute
interfaces required to create one or more VFIO mediated
devices each of which will be used to configure the AP
matrix for a guest and serve as a file descriptor
for facilitating communication between QEMU and the
VFIO AP device driver.
When the VFIO AP device driver is initialized:
* It registers with the AP bus for control of type 10 (CEX4
and newer) AP queue devices. This limitation was imposed
due to:
1. A desire to keep the code as simple as possible;
2. Some older models are no longer supported by the kernel
and others are getting close to end of service.
3. A lack of older systems on which to test older devices.
The probe and remove callbacks will be provided to support
the binding/unbinding of AP queue devices to/from the VFIO
AP device driver.
* Creates a matrix device, /sys/devices/vfio_ap/matrix,
to serve as the parent of the mediated devices created, one
for each guest, and to hold the APQNs of the AP devices bound to
the VFIO AP device driver.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The netdevice is always available, apply any carrier state changes to it
without caching them.
On a STARTLAN event (ie. carrier-up), defer updating the state to
qeth_core_hardsetup_card() in the subsequent recovery action.
Also remove the carrier-state checks from the xmit routines. Stopping
transmission on carrier-down is the responsibility of upper-level code
(eg see dev_direct_xmit()).
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If qeth_check_ipa_data() consumed an event, there's no point in
processing it further. So drop it early, and make the surrounding code
a tiny bit more readable.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull one level of checking up into qeth_send_control_data_cb(), and
clean up an else-after-return. No functional change.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have no code that is waiting for these events, so just drop them when
they arrive.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1. tracing iob->rc makes no sense when it hasn't been modified by the
callback,
2. the qeth_dbf_list is declared with LIST_HEAD, which also initializes
the list,
3. the ccwgroup core only calls the thaw/restore callbacks if the gdev
is online, so we don't have to check for it again.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The cdev-to-card translation walks through two layers of drvdata,
with no locking or refcounting (where eg. the ccwgroup core only
accesses a cdev's drvdata while holding the ccwlock).
This might be safe for now, but any careless usage of the helper has the
potential for subtle races and use-after-free's. Luckily there's only
one occurrence where we _really_ need it (in qeth_irq()), for any other
user we can just pass through an appropriate card pointer.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows us to remove the CARD_FROM_CDEV calls in the iob callbacks.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When not using the CQ, this allows us avoid the second skb queue walk
in qeth_release_skbs().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This was presumably left over from back when qeth recursed into
dev_queue_xmit().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To match the use of __skb_queue_purge(), also make the skb's enqueue in
qeth_fill_buffer() lockless.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch attempts to untangle the TX and RX code in qeth from
af_iucv's respective HiperTransport path:
On the TX side, pointing skb_network_header() at the IUCV header
means that qeth_l3_fill_af_iucv_hdr() no longer needs a magical offset
to access the header.
On the RX side, qeth pulls the (fake) L2 header off the skb like any
normal ethernet driver would. This makes working with the IUCV header
in af_iucv easier, since we no longer have to assume a fixed skb layout.
While at it, replace the open-coded length checks in af_iucv's RX path
with pskb_may_pull().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qeth_core_probe_device() sets the gdev's drvdata, but doesn't reset it
on a subsequent error. Move the (re-)setting around a bit, so that it
happens symmetrically on allocating/freeing the qeth_card struct.
This is no actual problem, as the ccwgroup core will discard the gdev
on a probe error. But from qeth's perspective the gdev is an external
resource, so it's best to manage it cleanly.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Device initialization code usually first loads a subdriver
(via qeth_core_load_discipline()), and then runs its setup() callback.
If this fails, it rolls back the load via qeth_core_free_discipline().
qeth_core_free_discipline() expects the options.layer attribute to be
initialized, but on error in setup() that's currently not the case.
Resulting in misbalanced symbol_put() calls.
Fix this by setting options.layer when loading the subdriver.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Consolidate declaration and initialization of a static variable.
While at it reduce its scope in qeth_core_load_discipline(), and simplify
the return logic accordingly.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While the raw values are fixed due to their use in a sysfs attribute,
we can still use the proper QETH_DISCIPLINE_* enum within the driver.
Also move the initialization into qeth_set_initial_options(), along with
all other user-configurable fields.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I've stumbled over this too many times now... AOBs are only ever used on
Output Queues. So in qdio_kick_handler(), move the call to their handler
into the Output-only path, and get rid of the convoluted contains_aobs()
helper. No functional change.
While at it, also remove
1. the unused sbal_state->aob field. For processing an async completion,
upper-layer drivers get their AOB pointer from the CQ buffer.
2. an unused EXPORT for qdio_allocate_aob(). External users would have
no way of passing an allocated AOB back into qdio.ko anyways...
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The AP bus scan is aborted before doing anything worth mentioning if
ap_select_domain() fails, e.g. if the ap_rights.aqm mask is all zeros.
As the result of this the ap bus fails to manage (e.g. create and
register) devices like it is supposed to.
Let us make ap_scan_bus() work even if ap_select_domain() can't select a
default domain. Let's also make ap_select_domain() return void, as there
are no more callers interested in its return value.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Michael Mueller <mimu@linux.ibm.com>
Fixes: 7e0bdbe5c2 "s390/zcrypt: AP bus support for alternate driver(s)"
[freude@linux.ibm.com: title and patch header slightly modified]
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Trivial fix to spelling mistake in message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Use the common code ARRAY_SIZE macro instead of a private implementation.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
kmemdup has implemented the function that kmalloc() + memcpy() will
do. We prefer to use the kmemdup function rather than an open coded
implementation.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The SCLP event 24 "Adapter Error Notification" supports three different
action qualifier of which 'adapter reset' is currently not enabled in
the sysfs interface. However, userspace tools might want to be able
to use the reset functionality as well. Enable the 'adapter reset'
qualifier.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
kmem_cache_destroy() can handle NULL pointer correctly, so there is
no need to check NULL pointer before calling kmem_cache_destroy().
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The resume code checks if the resume cpu is the same as the suspend cpu.
If not, and if it is also not possible to switch to the suspend cpu, an
error message should be printed and the resume process should be stopped
by loading a disabled wait psw.
The current logic is broken in multiple ways, the message is never printed,
and the disabled wait psw never loaded because the kernel panics before that:
- sam31 and SIGP_SET_ARCHITECTURE to ESA mode is wrong, this will break
on the first 64bit instruction in sclp_early_printk().
- The init stack should be used, but the stack pointer is not set up correctly
(missing aghi %r15,-STACK_FRAME_OVERHEAD).
- __sclp_early_printk() checks the sclp_init_state. If it is not
sclp_init_state_uninitialized, it simply returns w/o printing anything.
In the resumed kernel however, sclp_init_state will never be uninitialized.
This patch fixes those issues by removing the sam31/ESA logic, adding a
correct init stack pointer, and also introducing sclp_early_printk_force()
to allow using sclp_early_printk() even when sclp_init_state is not
uninitialized.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Two new tls tests added in parallel in both net and net-next.
Used Stephen Rothwell's linux-next resolution.
Signed-off-by: David S. Miller <davem@davemloft.net>
qeth_get_ipacmd_buffer() obtains its buffers for building IPA cmds from
__qeth_get_buffer(), where they are fully cleared. So get rid of all the
additional zero-ing in various other places.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For quite a lot of code paths it's obvious that they will never run in
IRQ context. So replace their spin_lock_irqsave() calls with
spin_lock_irq().
While at it, get rid of the redundant card pointer in struct qeth_reply
that was used by qeth_send_control_data() to access the card's lock.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Assuming this was just a typo, as returning an actual negative value
from a cmd callback would make no sense either.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Calling napi_schedule() from process context does not ensure that the
NET_RX softirq is run in a timely fashion. So trigger it manually.
This is no big issue with current code. A call to ndo_open() is usually
followed by a ndo_set_rx_mode() call, and for qeth this contains a
spin_unlock_bh(). Except for OSN, where qeth_l2_set_rx_mode() bails out
early.
Nevertheless it's best to not depend on this behaviour, and just fix
the issue at its source like all other drivers do. For instance see
commit 83a0c6e589 ("i40e: Invoke softirqs after napi_reschedule").
Fixes: a1c3ed4c9c ("qeth: NAPI support for l2 and l3 discipline")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When setting up, qeth installs its IRQ handler on the ccw devices. But
the IRQ handler is not cleared on removal - so even after qeth yields
control of the ccw devices, spurious interrupts would still be presented
to us.
Make (de-)installation of the IRQ handler part of the ccw channel
setup/removal helpers, and while at it also add the appropriate locking.
Shift around qeth_setup_channel() to avoid a forward declaration for
qeth_irq().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Restructure the OSN xmit path to handle misaligned HW headers properly,
without shifting the packet data around.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Switch TSO over to the faster transmit path, and remove all the unused
old TSO code.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add all the necessary TSO plumbing to the copy-less transmit path.
This includes calculating the right length of required protocol headers,
and always building a separate buffer element for the TSO headers.
A follow-up patch will then switch TSO traffic over to this path.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When qeth_add_hw_header() falls back to the header cache, ensure that
the requested length doesn't exceed the object size.
For current usage this is a no-brainer, but TSO transmission will
introduce protocol headers of varying length.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When qeth_add_hw_header() falls back to the HW header cache, it also
copies over the necessary protocol headers. Thus any manipulation to
the protocol headers needs to happen before adding the HW header.
For current usage this doesn't matter, but it becomes relevant when
moving TSO transmission over to the faster code path.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Combined L3+L4 csum offload is only required for some L3 HW. So for
L2 devices, don't offload the IP header csum calculation.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reference-ID: JUP 394553
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the last remaining user of qeth_get_elements_no() to
qeth_count_elements(), so this helper can be removed.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qeth_l3_xmit() is now only used for TSOv4 traffic, shrink it down.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
L3 OSAs can only offload IPv4 traffic, use the common L2 transmit path
for all other traffic.
In particular there's no support for TX VLAN offload, so any such packet
needs to be manually de-accelerated via ndo_features_check().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need the exact same transmit path for non-offload-eligible traffic on
L3 OSAs. So make it accessible from both sub-drivers.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One fix for the zcrypt driver to correctly handle incomplete
encryption/decryption operations.
A cleanup for the aqmask/apmask parsing to avoid variable
length arrays on the stack.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJbmkYUAAoJEDjwexyKj9rgrugH/21Uf1S0mkkRfDeYxD6lJva6
zNmEZ3V+GXc8L/0CisFWQOcIU1fO+jozp9HPGkQxeTvAuqIfVhBRVoMMxiTRaZb3
xdSBel8EvAGxlZq/6eq6fU59HPWGm+N53rC9J5MMQQqgpSmq8F2QeO5CoidflRh8
bdio9cliLsjPu+3P2JU3noolhb/f577J3dgP4gKARRpOfh8vUI7NLU3Mham+7886
ASjG8s/zr9spPnrErJusloOLDJt4M94J8KrIbB/WAT1wZv7GxClaGsCoyCuk4cDt
TV8zIgMK9TChedwMOO0T8WMaxq+XJV+iI0dC1eZ7xNUlaIBw+UbifxCG335L3E0=
=dHq1
-----END PGP SIGNATURE-----
Merge tag 's390-4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
- One fix for the zcrypt driver to correctly handle incomplete
encryption/decryption operations.
- A cleanup for the aqmask/apmask parsing to avoid variable length
arrays on the stack.
* tag 's390-4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: remove VLA usage from the AP bus
s390/crypto: Fix return code checking in cbc_paes_crypt()
For inbound data with an unsupported HW header format, only dump the
actual HW header. We have no idea how much payload follows it, and what
it contains. Worst case, we dump past the end of the Inbound Buffer and
access whatever is located next in memory.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qeth_query_oat_command() currently allocates the kernel buffer for
the SIOC_QETH_QUERY_OAT ioctl with kzalloc. So on systems with
fragmented memory, large allocations may fail (eg. the qethqoat tool by
default uses 132KB).
Solve this issue by using vzalloc, backing the allocation with
non-contiguous memory.
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Scatter-gather transmit brings a nice performance boost. Considering the
rather large MTU sizes at play, it's also totally the Right Thing To Do.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bailing out on allocation error is nice, but we also need to tell the
ccwgroup core that creating the qeth groupdev failed.
Fixes: d3d1b205e8 ("s390/qeth: allocate netdevice early")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The use of variable length arrays on the stack is deprecated.
git commit 3d8f60d38e
"s390/zcrypt: hex string mask improvements for apmask and aqmask."
added three new VLA arrays. Remove them again.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Collection of misc libnvdimm patches for 4.19 submission
* Adding support to read locked nvdimm capacity.
* Change test code to make DSM failure code injection an override.
* Add support for calculate maximum contiguous area for namespace.
* Add support for queueing a short ARS when there is on going ARS for
nvdimm.
* Allow NULL to be passed in to ->direct_access() for kaddr and
pfn params.
* Improve smart injection support for nvdimm emulation testing.
* Fix test code that supports for emulating controller temperature.
* Fix hang on error before devm_memremap_pages()
* Fix a bug that causes user memory corruption when data returned
to user for ars_status.
* Maintainer updates for Ross Zwisler emails and adding Jan Kara to fsdax.
-----BEGIN PGP SIGNATURE-----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=5p2n
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.19_misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dave Jiang:
"Collection of misc libnvdimm patches for 4.19 submission:
- Adding support to read locked nvdimm capacity.
- Change test code to make DSM failure code injection an override.
- Add support for calculate maximum contiguous area for namespace.
- Add support for queueing a short ARS when there is on going ARS for
nvdimm.
- Allow NULL to be passed in to ->direct_access() for kaddr and pfn
params.
- Improve smart injection support for nvdimm emulation testing.
- Fix test code that supports for emulating controller temperature.
- Fix hang on error before devm_memremap_pages()
- Fix a bug that causes user memory corruption when data returned to
user for ars_status.
- Maintainer updates for Ross Zwisler emails and adding Jan Kara to
fsdax"
* tag 'libnvdimm-for-4.19_misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm: fix ars_status output length calculation
device-dax: avoid hang on error before devm_memremap_pages()
tools/testing/nvdimm: improve emulation of smart injection
filesystem-dax: Do not request kaddr and pfn when not required
md/dm-writecache: Don't request pointer dummy_addr when not required
dax/super: Do not request a pointer kaddr when not required
tools/testing/nvdimm: kaddr and pfn can be NULL to ->direct_access()
s390, dcssblk: kaddr and pfn can be NULL to ->direct_access()
libnvdimm, pmem: kaddr and pfn can be NULL to ->direct_access()
acpi/nfit: queue issuing of ars when an uc error notification comes in
libnvdimm: Export max available extent
libnvdimm: Use max contiguous area for namespace size
MAINTAINERS: Add Jan Kara for filesystem DAX
MAINTAINERS: update Ross Zwisler's email address
tools/testing/nvdimm: Fix support for emulating controller temperature
tools/testing/nvdimm: Make DSM failure code injection an override
acpi, nfit: Prefer _DSM over _LSR for namespace label reads
libnvdimm: Introduce locked DIMM capacity support
Pull s390 updates from Martin Schwidefsky:
- A couple of patches for the zcrypt driver:
+ Add two masks to determine which AP cards and queues are host
devices, this will be useful for KVM AP device passthrough
+ Add-on patch to improve the parsing of the new apmask and aqmask
+ Some code beautification
- Second try to reenable the GCC plugins, the first patch set had a
patch to do this but the merge somehow missed this
- Remove the s390 specific GCC version check and use the generic one
- Three patches for kdump, two bug fixes and one cleanup
- Three patches for the PCI layer, one bug fix and two cleanups
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: remove gcc version check (4.3 or newer)
s390/zcrypt: hex string mask improvements for apmask and aqmask.
s390/zcrypt: AP bus support for alternate driver(s)
s390/zcrypt: code beautify
s390/zcrypt: switch return type to bool for ap_instructions_available()
s390/kdump: Remove kzalloc_panic
s390/kdump: Fix memleak in nt_vmcoreinfo
s390/kdump: Make elfcorehdr size calculation ABI compliant
s390/pci: remove fmb address from debug output
s390/pci: remove stale rc
s390/pci: fix out of bounds access during irq setup
s390/zcrypt: fix ap_instructions_available() returncodes
s390: reenable gcc plugins for real
The sysfs attributes /sys/bus/ap/apmask and /sys/bus/ap/aqmask
and the kernel command line arguments ap.apm and ap.aqm get
an improvement of the value parsing with this patch:
The mask values are bitmaps in big endian order starting with bit 0.
So adapter number 0 is the leftmost bit, mask is 0x8000... The sysfs
attributes and the kernel command line accept 2 different formats:
- Absolute hex string starting with 0x like "0x12345678" does set
the mask starting from left to right. If the given string is shorter
than the mask it is padded with 0s on the right. If the string is
longer than the mask an error comes back (EINVAL).
- Relative format - a concatenation (done with ',') of the terms
+<bitnr>[-<bitnr>] or -<bitnr>[-<bitnr>]. <bitnr> may be any
valid number (hex, decimal or octal) in the range 0...255.
Here are some examples:
"+0-15,+32,-128,-0xFF"
"-0-255,+1-16,+0x128"
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The current AP bus, AP devices and AP device drivers implementation
uses a clearly defined mapping for binding AP devices to AP device
drivers. So for example a CEX6C queue will always be bound to the
cex4queue device driver.
The Linux Device Driver model has no sensitivity for more than one
device driver eligible for one device type. If there exist more than
one drivers matching to the device type, simple all drivers are tried
consecutively. There is no way to determine and influence the probing
order of the drivers.
With KVM there is a need to provide additional device drivers matching
to the very same type of AP devices. With a simple implementation the
KVM drivers run in competition to the regular drivers. Whichever
'wins' a device depends on build order and implementation details
within the common Linux Device Driver Model and is not
deterministic. However, a userspace process could figure out which
device should be bound to which driver and sort out the correct
binding by manipulating attributes in the sysfs.
If for security reasons a AP device must not get bound to the 'wrong'
device driver the sorting out has to be done within the Linux kernel
by the AP bus code. This patch modifies the behavior of the AP bus
for probing drivers for devices in a way that two sets of drivers are
usable. Two new bitmasks 'apmask' and 'aqmask' are used to mark a
subset of the APQN range for 'usable by the ap bus and the default
drivers' or 'not usable by the default drivers and thus available for
alternate drivers like vfio-xxx'. So an APQN which is addressed by
this masking only the default drivers will be probed. In contrary an
APQN which is not addressed by the masks will never be probed and
bound to default drivers but onny to alternate drivers.
Eventually the two masks give a way to divide the range of APQNs into
two pools: one pool of APQNs used by the AP bus and the default
drivers and thus via zcrypt drivers available to the userspace of the
system. And another pool where no zcrypt drivers are bound to and
which can be used by alternate drivers (like vfio-xxx) for their
needs. This division is hot-plug save and makes sure a APQN assigned
to an alternate driver is at no time somehow exploitable by the wrong
party.
The two masks are located in sysfs at /sys/bus/ap/apmask and
/sys/bus/ap/aqmask. The mask syntax is exactly the same as the
already existing mask attributes in the /sys/bus/ap directory (for
example ap_usage_domain_mask and ap_control_domain_mask).
By default all APQNs belong to the ap bus and the default drivers:
cat /sys/bus/ap/apmask
0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
cat /sys/bus/ap/aqmask
0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
The masks can be changed at boot time with the kernel command line
like this:
... ap.apmask=0xffff ap.aqmask=0x40
This would give these two pools:
default drivers pool: adapter 0 - 15, domain 1
alternate drivers pool: adapter 0 - 15, all but domain 1
adapter 16-255, all domains
The sysfs attributes for this two masks are writeable and an
administrator is able to reconfigure the assignements on the fly by
writing new mask values into. With changing the mask(s) a revision of
the existing queue to driver bindings is done. So all APQNs which are
bound to the 'wrong' driver are reprobed via kernel function
device_reprobe() and thus the new correct driver will be assigned with
respect of the changed apmask and aqmask bits.
The mask values are bitmaps in big endian order starting with bit 0.
So adapter number 0 is the leftmost bit, mask is 0x8000... The sysfs
attributes accept 2 different formats:
- Absolute hex string starting with 0x like "0x12345678" does set
the mask starting from left to right. If the given string is shorter
than the mask it is padded with 0s on the right. If the string is
longer than the mask an error comes back (EINVAL).
- '+' or '-' followed by a numerical value. Valid examples are "+1",
"-13", "+0x41", "-0xff" and even "+0" and "-0". Only the addressed
bit in the mask is switched on ('+') or off ('-').
This patch will also be the base for an upcoming extension to the
zcrypt drivers to be able to provide additional zcrypt device nodes
with filtering based on ap and aq masks.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Code beautify by following most of the checkpatch suggestions:
- SPDX license identifier line complains by checkpatch
- missing space or newline complains by checkpatch
- octal numbers for permssions complains by checkpatch
- renaming of static sysfs functions complains by checkpatch
- fix of block comment complains by checkpatch
- fix printf like calls where function name instead of %s __func__
was used
- __packed instead of __attribute__((packed))
- init to zero for static variables removed
- use of DEVICE_ATTR_RO and DEVICE_ATTR_RW macros
No functional code changes or API changes!
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Here is the big tty and serial driver pull request for 4.19-rc1.
It's not all that big, just a number of small serial driver updates and
fixes, along with some better vt handling for unicode characters for
those using braille terminals.
Full details are in the shortlog.
All of these patches have been in linux-next for a long time with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW3g/5Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynZDwCdETeD4sIqt06hXeG4ADiVORb3gLgAnjJTbl9Y
reffAFDRWrwD42SvTi1X
=7tX/
-----END PGP SIGNATURE-----
Merge tag 'tty-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big tty and serial driver pull request for 4.19-rc1.
It's not all that big, just a number of small serial driver updates
and fixes, along with some better vt handling for unicode characters
for those using braille terminals.
All of these patches have been in linux-next for a long time with no
reported issues"
* tag 'tty-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (73 commits)
tty: serial: 8250: Revert NXP SC16C2552 workaround
serial: 8250_exar: Read INT0 from slave device, too
tty: rocket: Fix possible buffer overwrite on register_PCI
serial: 8250_dw: Add ACPI support for uart on Broadcom SoC
serial: 8250_dw: always set baud rate in dw8250_set_termios
dt-bindings: serial: Add binding for uartlite
tty: serial: uartlite: Add support for suspend and resume
tty: serial: uartlite: Add clock adaptation
tty: serial: uartlite: Add structure for private data
serial: sh-sci: Improve support for separate TEI and DRI interrupts
serial: sh-sci: Remove SCIx_RZ_SCIFA_REGTYPE
serial: sh-sci: Allow for compressed SCIF address
serial: sh-sci: Improve interrupts description
serial: 8250: Use cached port name directly in messages
serial: 8250_exar: Drop unused variable in pci_xr17v35x_setup()
vt: drop unused struct vt_struct
vt: avoid a VLA in the unicode screen scroll function
vt: add /dev/vcsu* to devices.txt
vt: coherence validation code for the unicode screen buffer
vt: selection: take screen contents from uniscr if available
...
cma_alloc() doesn't really support gfp flags other than __GFP_NOWARN, so
convert gfp_mask parameter to boolean no_warn parameter.
This will help to avoid giving false feeling that this function supports
standard gfp flags and callers can pass __GFP_ZERO to get zeroed buffer,
what has already been an issue: see commit dd65a941f6 ("arm64:
dma-mapping: clear buffers allocated with FORCE_CONTIGUOUS flag").
Link: http://lkml.kernel.org/r/20180709122019eucas1p2340da484acfcc932537e6014f4fd2c29~-sqTPJKij2939229392eucas1p2j@eucas1p2.samsung.com
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michał Nazarewicz <mina86@mina86.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
During review of KVM patches it was complained that the
ap_instructions_available() function returns 0 if AP
instructions are available and -ENODEV if not. The function
acts like a boolean function to check for AP instructions
available and thus should return 0 on failure and != 0 on
success. Changed to the suggested behaviour and adapted
the one and only caller of this function which is the ap
bus core code.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Pull networking updates from David Miller:
"Highlights:
- Gustavo A. R. Silva keeps working on the implicit switch fallthru
changes.
- Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
Luca Coelho.
- Re-enable ASPM in r8169, from Kai-Heng Feng.
- Add virtual XFRM interfaces, which avoids all of the limitations of
existing IPSEC tunnels. From Steffen Klassert.
- Convert GRO over to use a hash table, so that when we have many
flows active we don't traverse a long list during accumluation.
- Many new self tests for routing, TC, tunnels, etc. Too many
contributors to mention them all, but I'm really happy to keep
seeing this stuff.
- Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.
- Lots of cleanups and fixes in L2TP code from Guillaume Nault.
- Add IPSEC offload support to netdevsim, from Shannon Nelson.
- Add support for slotting with non-uniform distribution to netem
packet scheduler, from Yousuk Seung.
- Add UDP GSO support to mlx5e, from Boris Pismenny.
- Support offloading of Team LAG in NFP, from John Hurley.
- Allow to configure TX queue selection based upon RX queue, from
Amritha Nambiar.
- Support ethtool ring size configuration in aquantia, from Anton
Mikaev.
- Support DSCP and flowlabel per-transport in SCTP, from Xin Long.
- Support list based batching and stack traversal of SKBs, this is
very exciting work. From Edward Cree.
- Busyloop optimizations in vhost_net, from Toshiaki Makita.
- Introduce the ETF qdisc, which allows time based transmissions. IGB
can offload this in hardware. From Vinicius Costa Gomes.
- Add parameter support to devlink, from Moshe Shemesh.
- Several multiplication and division optimizations for BPF JIT in
nfp driver, from Jiong Wang.
- Lots of prepatory work to make more of the packet scheduler layer
lockless, when possible, from Vlad Buslov.
- Add ACK filter and NAT awareness to sch_cake packet scheduler, from
Toke Høiland-Jørgensen.
- Support regions and region snapshots in devlink, from Alex Vesker.
- Allow to attach XDP programs to both HW and SW at the same time on
a given device, with initial support in nfp. From Jakub Kicinski.
- Add TLS RX offload and support in mlx5, from Ilya Lesokhin.
- Use PHYLIB in r8169 driver, from Heiner Kallweit.
- All sorts of changes to support Spectrum 2 in mlxsw driver, from
Ido Schimmel.
- PTP support in mv88e6xxx DSA driver, from Andrew Lunn.
- Make TCP_USER_TIMEOUT socket option more accurate, from Jon
Maxwell.
- Support for templates in packet scheduler classifier, from Jiri
Pirko.
- IPV6 support in RDS, from Ka-Cheong Poon.
- Native tproxy support in nf_tables, from Máté Eckl.
- Maintain IP fragment queue in an rbtree, but optimize properly for
in-order frags. From Peter Oskolkov.
- Improvde handling of ACKs on hole repairs, from Yuchung Cheng"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
hv/netvsc: Fix NULL dereference at single queue mode fallback
net: filter: mark expected switch fall-through
xen-netfront: fix warn message as irq device name has '/'
cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
net: dsa: mv88e6xxx: missing unlock on error path
rds: fix building with IPV6=m
inet/connection_sock: prefer _THIS_IP_ to current_text_addr
net: dsa: mv88e6xxx: bitwise vs logical bug
net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
ieee802154: hwsim: using right kind of iteration
net: hns3: Add vlan filter setting by ethtool command -K
net: hns3: Set tx ring' tc info when netdev is up
net: hns3: Remove tx ring BD len register in hns3_enet
net: hns3: Fix desc num set to default when setting channel
net: hns3: Fix for phy link issue when using marvell phy driver
net: hns3: Fix for information of phydev lost problem when down/up
net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
net: hns3: Add support for serdes loopback selftest
bnxt_en: take coredump_record structure off stack
...
Pull s390 updates from Heiko Carstens:
"Since Martin is on vacation you get the s390 pull request from me:
- Host large page support for KVM guests. As the patches have large
impact on arch/s390/mm/ this series goes out via both the KVM and
the s390 tree.
- Add an option for no compression to the "Kernel compression mode"
menu, this will come in handy with the rework of the early boot
code.
- A large rework of the early boot code that will make life easier
for KASAN and KASLR. With the rework the bootable uncompressed
image is not generated anymore, only the bzImage is available. For
debuggung purposes the new "no compression" option is used.
- Re-enable the gcc plugins as the issue with the latent entropy
plugin is solved with the early boot code rework.
- More spectre relates changes:
+ Detect the etoken facility and remove expolines automatically.
+ Add expolines to a few more indirect branches.
- A rewrite of the common I/O layer trace points to make them
consumable by 'perf stat'.
- Add support for format-3 PCI function measurement blocks.
- Changes for the zcrypt driver:
+ Add attributes to indicate the load of cards and queues.
+ Restructure some code for the upcoming AP device support in KVM.
- Build flags improvements in various Makefiles.
- A few fixes for the kdump support.
- A couple of patches for gcc 8 compile warning cleanup.
- Cleanup s390 specific proc handlers.
- Add s390 support to the restartable sequence self tests.
- Some PTR_RET vs PTR_ERR_OR_ZERO cleanup.
- Lots of bug fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (107 commits)
s390/dasd: fix hanging offline processing due to canceled worker
s390/dasd: fix panic for failed online processing
s390/mm: fix addressing exception after suspend/resume
rseq/selftests: add s390 support
s390: fix br_r1_trampoline for machines without exrl
s390/lib: use expoline for all bcr instructions
s390/numa: move initial setup of node_to_cpumask_map
s390/kdump: Fix elfcorehdr size calculation
s390/cpum_sf: save TOD clock base in SDBs for time conversion
KVM: s390: Add huge page enablement control
s390/mm: Add huge page gmap linking support
s390/mm: hugetlb pages within a gmap can not be freed
KVM: s390: Add skey emulation fault handling
s390/mm: Add huge pmd storage key handling
s390/mm: Clear skeys for newly mapped huge guest pmds
s390/mm: Clear huge page storage keys on enable_skey
s390/mm: Add huge page dirty sync support
s390/mm: Add gmap pmd invalidation and clearing
s390/mm: Add gmap pmd notification bit setting
s390/mm: Add gmap pmd linking
...
Return statements in functions returning bool should use true or false
instead of an integer value.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allocating the main qeth_card struct with GFP_DMA blocks us from moving
it into netdev_priv(). But the only reason why we need DMA memory is the
ccw1 structs embedded into each ccw channel. So extract those into
separate allocations, like we already do for the cmd buffers.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The qeth_card struct is kzalloc-ed, so remove all the redundant
0-initializations. While at it, split up what's left of
qeth_determine_card_type().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The data channel currently doesn't need a setup operation, because we
don't use pre-allocated cmd buffers for its IO. But subsequent changes
will introduce further setup that also applies to the data channel.
This refactors things a bit, so that the new stuff can then be
automatically applied to all channels.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Re-work the helper a little bit, so that it can be used for all CCWs
that qeth issues.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Where possible use accessor macros and local pointers to access the ccw
channels. This makes it less likely to miss a spot.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During offline processing two worker threads are canceled without
freeing the device reference which leads to a hanging offline process.
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fix a panic that occurs for a device that got an error in
dasd_eckd_check_characteristics() during online processing.
For example the read configuration data command may have failed.
If this error occurs the device is not being set online and the earlier
invoked steps during online processing are rolled back. Therefore
dasd_eckd_uncheck_device() is called which needs a valid private
structure. But this pointer is not valid if
dasd_eckd_check_characteristics() has failed.
Check for a valid device->private pointer to prevent a panic.
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
dcssblk_direct_access() needs to check the validity of pointers kaddr
and pfn for NULL assignment. If anyone equals to NULL, it doesn't need
to calculate the value.
If either of them is equal to NULL, that is to say callers may
have no need for kaddr or pfn, so this patch is prepared for allowing
them to pass in NULL instead of having to pass in a pointer or local
variable that they then just throw away.
Signed-off-by: Huaisheng Ye <yehs1@lenovo.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Dave Jiang <dave.jianig@intel.com>
Tools like 'perf stat' parse the trace point format files defined
in /sys/kernel/debug/tracing/events/s390/.../format to handle
the print fmt: statement. The kernel provides a library in
directory linux/tools/lib/traceevent/* for this reason.
This library can not handle structures or unions defined in
the TRACE_EVENT/TP_STRUCT__entry macros with __field_struct macro.
There is no possibility to extract a structure member
(which might be a bit field) since there is no packing
information nor bit field offset by parsing the printf fmt line.
Therefore rewrite the TRACE_EVENT macro and add the
__field macro for the necessary members.
Keep the __fieldstruct macro to extract the complete
structure when dumps are analysed.
Note that the same information is displayed, this is no
interface change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Acked-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Tools like 'perf stat' parse the trace point format files defined
in /sys/kernel/debug/tracing/events/s390/.../format to handle
the print fmt: statement. The kernel provides a library in
directory linux/tools/lib/traceevent/* for this reason.
This library can not handle structures or unions defined in
the TRACE_EVENT/TP_STRUCT__entry macros with __field_struct macro.
There is no possibility to extract a structure member
(which might be a bit field) since there is no packing
information nor bit field offset by parsing the printf fmt line.
Therefore rewrite the TRACE_EVENT macro and add the
__field macro for the necessary members.
Keep the __fieldstruct macro to extract the complete
structure when dumps are analysed.
Note that the same information is displayed, this is no
interface change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Acked-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Tools like 'perf stat' parse the trace point format files defined
in /sys/kernel/debug/tracing/events/s390/.../format to handle
the print fmt: statement. The kernel provides a library in
directory linux/tools/lib/traceevent/* for this reason.
This library can not handle structures or unions defined in
the TRACE_EVENT/TP_STRUCT__entry macros with __field_struct macro.
There is no possibility to extract a structure member
(which might be a bit field) since there is no packing
information nor bit field offset by parsing the printf fmt line.
Therefore rewrite the TRACE_EVENT macro and add the
__field macro for the necessary members.
Keep the __fieldstruct macro to extract the complete
structure when dumps are analysed.
Note that the same information is displayed, this is no
interface change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Acked-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Tools like 'perf stat' parse the trace point format files defined
in /sys/kernel/debug/tracing/events/s390/.../format to handle
the print fmt: statement. The kernel provides a library in
directory linux/tools/lib/traceevent/* for this reason.
This library can not handle structures or unions defined in
the TRACE_EVENT/TP_STRUCT__entry macros with __field_struct macro.
There is no possibility to extract a structure member
(which might be a bit field) since there is no packing
information nor bit field offset by parsing the printf fmt line.
Therefore rewrite the TRACE_EVENT macro and add the
the __field macro for the missing members.
Keep the __fieldstruct macro to extract the complete
structure when dumps are analysed.
Note that the same information is displayed, this is no
interface change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Acked-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Tools like 'perf stat' parse the trace point format files defined
in /sys/kernel/debug/tracing/events/s390/.../format to handle
the print fmt: statement. The kernel provides a library in
directory linux/tools/lib/traceevent/* for this reason.
This library can not handle structures or unions defined in
the TRACE_EVENT/TP_STRUCT__entry macros with __field_struct macro.
There is no possibility to extract a structure member
(which might be a bit field) since there is no packing
information nor bit field offset by parsing the printf fmt line.
Therefore rewrite the TRACE_EVENT macro and add the
__field macro for the members adapter_IO, isc and type
of struct tpi_info.
Note that the same information is displayed, this is no
interface change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Acked-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Tools like 'perf stat' parse the trace point format files defined
in /sys/kernel/debug/tracing/events/s390/.../format to handle
the print fmt: statement. The kernel provides a library in
directory linux/tools/lib/traceevent/* for this reason.
This library can not handle structures or unions defined in
the TRACE_EVENT/TP_STRUCT__entry macros with __field_struct macro.
There is no possibility to extract a structure member
(which might be a bit field) since there is no packing
information nor bit field offset by parsing the printf fmt line.
Therefore rewrite the TRACE_EVENT macro and add the
__field macro for the necessary fields.
Keep the __fieldstruct macro to extract the complete
structure when dumps are analysed.
Note that the same information is displayed, this is no
interface change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Acked-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Modify the L2 OSA xmit path so that it also supports L2 IQD devices
(in particular, their HW header requirements). This allows IQD devices
to advertise NETIF_F_SG support, and eliminates the allocation overhead
for the HW header.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some transmit modes require that the HW header is located in the same
page as the initial protocol headers in skb->data. Let callers specify
the size of this contiguous header range, and enforce it when building
the HW header.
While at it, apply some gentle renaming to the relevant L2 code so that
it matches the L3 code.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When checking whether an skb needs to be linearized to fit into an IO
buffer, it's desirable to consider the skb's final size and layout
(ie. after the HW header was added). But a subsequent linearization can
then cause the re-positioned HW header to violate its alignment
restrictions.
Dealing with this situation in two different code paths is quite tricky.
This patch integrates a) linearize-check and b) HW header construction
into one 3 step-sequence:
1. evaluate how the HW header needs to be added (to identify if it takes
up an additional buffer element), then
2. check if the required buffer elements exceed the device's limit.
Linearize when necessary and re-evaluate the HW header placement.
3. Add the HW header in the best-possible way:
a) push, without taking up an additional buffer element
b) push, but consume another buffer element
c) allocate a header object from the cache.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nowadays an skb fragment typically spans over multiple pages. So replace
the obsolete, SG-only 'fragments' counter with one that tracks the
consumed buffer elements. This is what actually matters for performance.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qeth's ndo_change_mtu() only applies some trivial bounds checking. Set
up dev->min_mtu properly, so that dev_set_mtu() can do this for us.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the MPC initialization code discovers the HW-specific max MTU,
apply the resulting changes straight to the netdevice.
If this is the device's first initialization, also set its MTU
(HiperSockets: the max MTU; else: a layer-specific default value).
Then cap the current MTU by the new max MTU.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The netdevice is always available now, so get the portno from there.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allocation of the netdevice is currently delayed until a qeth card first
goes online. This complicates matters in several places, where we need
to cache values instead of applying them straight to the netdevice.
Improve on this by moving the allocation up to where the qeth card
itself is created. This is also one step in direction of eventually
placing the qeth card into netdev_priv().
In all subsequent code, remove the now redundant checks whether
card->dev is valid.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the subdriver's remove() routine has completed, the card's layer
mode is undetermined again. Reflect this in the layer2 field.
If qeth_dev_layer2_store() hits an error after remove() was called, the
card _always_ requires a setup(), even if the previous layer mode is
requested again.
But qeth_dev_layer2_store() bails out early if the requested layer mode
still matches the current one. So unless we reset the layer2 field,
re-probing the card back to its previous mode is currently not possible.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
By updating q->used_buffers only _after_ do_QDIO() has completed, there
is a potential race against the buffer's TX completion. In the unlikely
case that the TX completion path wins, qeth_qdio_output_handler() would
decrement the counter before qeth_flush_buffers() even incremented it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PTR_RET is deprecated, use PTR_ERR_OR_ZERO instead.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
PTR_RET is deprecated, use PTR_ERR_OR_ZERO instead.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
PTR_RET is deprecated, use PTR_ERR_OR_ZERO instead.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The kbd_ioctl uses two user controlled indexes for KDGKBENT/KDSKBENT.
Use array_index_nospec to prevent any out of bounds speculation.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Remove attribute packed where possible failing this add proper alignment
information to fix warnings like the one below:
drivers/s390/cio/chsc.c: In function 'chsc_siosl':
drivers/s390/cio/chsc.c:1287:2: warning: alignment 1 of 'struct <anonymous>' is less than 4 [-Wpacked-not-aligned]
} __attribute__ ((packed)) *siosl_area;
Note: this patch should be a nop since non of these structs use auto
storage but allocated pages. However there are changes to the generated
code because of additional padding at the end of some of the structs due
to alignment when memset(foo, 0, sizeof(*foo)) is used.
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Both css_evaluate_new_subchannel and cio_validate_subchannel used
stsch and css_sch_is_valid to check for a valid device.
Reduce stsch calls during subchannel evaluation by re-using schib
data. Also the type/devno valid information is only checked once.
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
In css_alloc_subchannel we allocate the subchannel and do a
validation of the subchannel (to decide if we should look for
devices via this subchannel). On a typical LPAR we find lots
of subchannels to be invalid (because there is no device
attached or the device is blacklisted) leading to lots of
useless kmalloc and kfree calls.
This patch changes the order to only allocate the subchannels
that have been found valid.
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The css bus code uses 2 initcalls: channel_subsystem_init to
initialize internal data and channel_subsystem_init_sync to
start scanning for devices and wait for it to finish.
The start scanning for devices part is moved to the first
initcall such that more work happens in parallel.
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Improve locking in chp_new to make sure that we don't register
the same chpid twice. Chpid registration was synchronized via
the machine check handler thread but we also have codepaths to
look for new chpids triggered independent of that thread (during
IPL or resume from hibernate).
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Replace strncpy which is used to deliberately avoid string NUL-termination
with memcpy. This allows to get rid of gcc 8 stringop-truncation warning:
inlined from 'query_crypto_facility.constprop' at
drivers/s390/crypto/pkey_api.c:702:2:
./include/linux/string.h:246:9: warning: '__builtin_strncpy' output
truncated before terminating nul copying 8 bytes from a string of the
same length [-Wstringop-truncation]
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Move the xmit of offload-eligible (ie IPv4) traffic on OSA over to the
new, copy-free path.
As with L2, we'll need to preserve the skb_orphan() behaviour of the
old code path until TX completion is sufficiently fast.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This implements a new xmit path for L3 HiperSockets, which carves the
HW header from skb headroom instead of allocating it from the hdr cache.
It also adds NETIF_F_SG support.
The delta in qeth_l3_xmit() is all just removal of IQD-specific code and
some minor consolidation.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for future work, move the high-level xmit work into a
separate wrapper. This matches the L2 xmit code.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a L3 device doesn't offer TSO, allow the stack to build full-size
GSO skbs.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove some redundant EXPORTs. While at it, also move some L2-only
prototypes into the proper header file.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reshuffle the code a bit so that everything is in one place.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Consolidate duplicated code, fix the misuse of RTN_UNSPEC and simplify
the handling of non-unicast traffic on IQD devices.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Changing a device's address lists (or its promisc mode) already triggers
an RX modeset, there's no need to do it manually from the L2 driver's
ndo_vlan_rx_kill_vid() hook.
Also when setting a device online, dev_open() already calls
dev_set_rx_mode(). So a manual modeset is only necessary from the
recovery path.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Except for tracing, the pointer is not used.
At the same time, accessing it from qeth_qdio_output_handler() is racy:
whenever qeth_qdio_cq_handler() gets control, its call to
qeth_qdio_handle_aob() frees the AOB.
So the AOB pointer that qeth_qdio_output_handler() stores into 'buffer'
can go stale at any time, and trigger a use-after-free.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the new qeth_scrub_qdio_buffer() helper, remove an extra parameter
from qeth_clear_output_buffer(), init the bufstates.user field just once
(in qeth_flush_buffers()) and remove some noisy trace messages.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This completes dead keys definitions for internationalization
completeness on the console. The representatives have been chosen
coherently with libx11 compose sequences, which avoid symetry conflicts
(e.g. there is U with caron, but no c with breve).
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull s390 fixes from Martin Schwidefsky:
"A few more changes for v4.18:
- wire up the two new system calls io_pgetevents and rseq
- fix a register corruption in the expolines code for machines
without EXRL
- drastically reduce the memory utilization of the dasd driver
- fix reference counting for KVM page table pages"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: wire up rseq system call
s390: wire up io_pgetevents system call
s390/mm: fix refcount usage for 4K pgste
s390/dasd: reduce the default queue depth and nr of hardware queues
s390: Correct register corruption in critical section cleanup
Change the tasklets parameter type to fix W=1 warnings when building
with gcc 8 like below:
drivers/s390/block/dasd.c: In function 'dasd_alloc_device':
drivers/s390/block/dasd.c:129:8: warning: cast between incompatible function types
from 'void (*)(struct dasd_device *)' to 'void (*)(long unsigned int)' [-Wcast-function-type]
(void (*)(unsigned long)) dasd_device_tasklet,
^
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Simple overlapping changes in stmmac driver.
Adjust skb_gro_flush_final_remcsum function signature to make GRO list
changes in net-next, as per Stephen Rothwell's example merge
resolution.
Signed-off-by: David S. Miller <davem@davemloft.net>
The following gcc warning is issued for strncpy which is used to
deliberately avoid string NUL-termination. Reuse memcpy to avoid the
warning.
inlined from 'monwrite_diag' at drivers/s390/char/monwriter.c:64:2:
./include/linux/string.h:246:9: warning: '__builtin_strncpy' output
truncated before terminating nul copying 7 bytes from a string of the
same length [-Wstringop-truncation]
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Replace strncpy which is used to deliberately avoid string NUL-termination
with memcpy. This allows to get rid of gcc 8 stringop-truncation warning:
inlined from 'ext_to_int_kekl' at drivers/s390/char/tape_3590.c:123:2:
./include/linux/string.h:246:9: warning: '__builtin_strncpy'
output may be truncated copying 64 bytes from a string of length 64
[-Wstringop-truncation]
Also replaces "for" loop on memset.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Use strlcpy to make sure strings are NUL-terminated. Fixes the following
gcc 8 warning:
inlined from 'register_tape_dev' at drivers/s390/char/tape_class.c:57:2:
./include/linux/string.h:246:9: warning: '__builtin_strncpy' specified
bound 32 equals destination size [-Wstringop-truncation]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
There have been identified some places in the zcrypt
device driver where copy_from_user() is called but the
length value is not explicitly checked.
So now some plausibility checks and comments have been
introduced there.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
drivers/s390/block/dasd_alias.c:711:2: warning: 'strncpy' output truncated
before terminating nul copying 4 bytes from a string of the same length
[-Wstringop-truncation]
strncpy((char *) &cqr->magic, "ECKD", 4);
Replace strncpy to int as a buffer with memcpy.
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The numa_node field of the tag_set struct has to be explicitly
initialized, otherwise it stays as 0, which is a valid numa node id and
cause memory allocation failure if node 0 is offline.
Acked-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The numa_node field of the tag_set struct has to be explicitly
initialized, otherwise it stays as 0, which is a valid numa node id and
cause memory allocation failure if node 0 is offline.
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reduce the default values for the number of hardware queues and queue depth
to significantly reduce the memory footprint of a DASD device.
The memory consumption per DASD device reduces from approximately 40MB to
approximately 1.5MB.
This is necessary to build systems with a large number of DASD devices and
a reasonable amount of memory.
Performance measurements showed that good performance results are possible
with the new default values even on systems with lots of CPUs and lots of
alias devices.
Fixes: e443343e50 ("s390/dasd: blk-mq conversion")
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
commit e830baa9c3 ("qeth: restore device features after recovery") and
commit ce34435641 ("s390/qeth: rely on kernel for feature recovery")
made sure that the HW functions for device features get re-programmed
after recovery.
But we missed that the same handling is also required when a card is
first set offline (destroying all HW context), and then online again.
Fix this by moving the re-enable action out of the recovery-only path.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If qeth_qdio_output_handler() detects that a transmit requires async
completion, it replaces the pending buffer's metadata object
(qeth_qdio_out_buffer) so that this queue buffer can be re-used while
the data is pending completion.
Later when the CQ indicates async completion of such a metadata object,
qeth_qdio_cq_handler() tries to free any data associated with this
object (since HW has now completed the transfer). By calling
qeth_clear_output_buffer(), it erronously operates on the queue buffer
that _previously_ belonged to this transfer ... but which has been
potentially re-used several times by now.
This results in double-free's of the buffer's data, and failing
transmits as the buffer descriptor is scrubbed in mid-air.
The correct way of handling this situation is to
1. scrub the queue buffer when it is prepared for re-use, and
2. later obtain the data addresses from the async-completion notifier
(ie. the AOB), instead of the queue buffer.
All this only affects qeth devices used for af_iucv HiperTransport.
Fixes: 0da9581ddb ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
*ether_addr*_64bits functions have been introduced to optimize
performance critical paths, which access 6-byte ethernet address as u64
value to get "nice" assembly. A harmless hack works nicely on ethernet
addresses shoved into a structure or a larger buffer, until busted by
Kasan on smth like plain (u8 *)[6].
qeth_l2_set_mac_address calls qeth_l2_remove_mac passing
u8 old_addr[ETH_ALEN] as an argument.
Adding/removing macs for an ethernet adapter is not that performance
critical. Moreover is_multicast_ether_addr_64bits itself on s390 is not
faster than is_multicast_ether_addr:
is_multicast_ether_addr(%r2) -> %r2
llc %r2,0(%r2)
risbg %r2,%r2,63,191,0
is_multicast_ether_addr_64bits(%r2) -> %r2
llgc %r2,0(%r2)
risbg %r2,%r2,63,191,0
So, let's just use is_multicast_ether_addr instead of
is_multicast_ether_addr_64bits.
Fixes: bcacfcbc82 ("s390/qeth: fix MAC address update sequence")
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When qeth_l2_set_mac_address() finds the card in a non-reachable state,
it merely copies the new MAC address into dev->dev_addr so that
__qeth_l2_set_online() can later register it with the HW.
But __qeth_l2_set_online() may very well be running concurrently, so we
can't trust the card state without appropriate locking:
If the online sequence is past the point where it registers
dev->dev_addr (but not yet in SOFTSETUP state), any address change needs
to be properly programmed into the HW. Otherwise the netdevice ends up
with a different MAC address than what's set in the HW, and inbound
traffic is not forwarded as expected.
This is most likely to occur for OSD in LPAR, where
commit 21b1702af1 ("s390/qeth: improve fallback to random MAC address")
now triggers eg. systemd to immediately change the MAC when the netdevice
is registered with a NET_ADDR_RANDOM address.
Fixes: bcacfcbc82 ("s390/qeth: fix MAC address update sequence")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit b7493e91c1.
On its own, querying RDEV for a MAC address works fine. But when upgrading
from a qeth that previously queried DDEV on a z/VM NIC (ie. any kernel with
commit ec61bd2fd2), the RDEV query now returns a _different_ MAC address
than the DDEV query.
If the NIC is configured with MACPROTECT, z/VM apparently requires us to
use the MAC that was initially returned (on DDEV) and registered. So after
upgrading to a kernel that uses RDEV, the SETVMAC registration cmd for the
new MAC address fails and we end up with a non-operabel interface.
To avoid regressions on upgrade, switch back to using DDEV for the MAC
address query. The downgrade path (first RDEV, later DDEV) is fine, in this
case both queries return the same MAC address.
Fixes: b7493e91c1 ("s390/qeth: use Read device to query hypervisor for MAC")
Reported-by: Michal Kubecek <mkubecek@suse.com>
Tested-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the Internal Shared Memory vPCI Adapter.
This driver implements the interfaces of the SMC-D protocol.
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move all the inline functions from the ap bus header
file ap_asm.h into the in-kernel api header file
arch/s390/include/asm/ap.h so that KVM can make use
of all the low level AP functions.
Signed-off-by: Harald Freudenberger <freude@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Show the current load value of cards and queues in sysfs.
The load value for each card and queue is maintained by
the zcrypt device driver for dispatching and load
balancing requests over the available devices.
This patch provides the load value to userspace via a
new read only sysfs attribute 'load' per card and queue.
Signed-off-by: Harald Freudenberger <freude@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed and adapted the register use and asm constraints
of the C inline assembler functions in accordance to the
the AP instructions specifications.
Signed-off-by: Harald Freudenberger <freude@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Added new inline function ap_pqap_zapq()
which is a C inline function wrapper for
the AP PQAP(ZAPQ) instruction.
Signed-off-by: Harald Freudenberger <freude@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Re-compile ebcdic.c and sclp_early_core.c for the decompressor,
using proper decompressor CFLAGS. This also allows to potentially use
instrumentation for those files when built for the main kernel image.
With kbuild there is no easy way to re-compile a source file from
another directory. Bypass ugly rules and Makefile meta-programming
with relative path includes of original files.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
When allocating a new AOB fails, handle_outbound() is still capable of
transmitting the selected buffer (just without async completion).
But if a previous transfer on this queue slot used async completion, its
sbal_state flags field is still set to QDIO_OUTBUF_STATE_FLAG_PENDING.
So when the upper layer driver sees this stale flag, it expects an async
completion that never happens.
Fix this by unconditionally clearing the flags field.
Fixes: 104ea556ee ("qdio: support asynchronous delivery of storage blocks")
Cc: <stable@vger.kernel.org> #v3.2+
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Pull s390 updates from Martin Schwidefsky:
"common I/O layer
- Fix bit-fields crossing storage-unit boundaries in css_general_char
dasd driver
- Avoid a sparse warning in regard to the queue lock
- Allocate the struct dasd_ccw_req as per request data. Only for
internal I/O is the structure allocated separately
- Remove the unused function dasd_kmalloc_set_cda
- Save a few bytes in struct dasd_ccw_req by reordering fields
- Convert remaining users of dasd_kmalloc_request to
dasd_smalloc_request and remove the now unused function
vfio/ccw
- Refactor and improve pfn_array_alloc_pin/pfn_array_pin
- Add a new tracepoint for failed vfio/ccw requests
- Add a CCW translation improvement to accept more requests as valid
- Bug fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/dasd: only use preallocated requests
s390/dasd: reshuffle struct dasd_ccw_req
s390/dasd: remove dasd_kmalloc_set_cda
s390/dasd: move dasd_ccw_req to per request data
s390/dasd: simplify locking in process_final_queue
s390/cio: sanitize css_general_characteristics definition
vfio: ccw: add tracepoints for interesting error paths
vfio: ccw: set ccw->cda to NULL defensively
vfio: ccw: refactor and improve pfn_array_alloc_pin()
vfio: ccw: shorten kernel doc description for pfn_array_pin()
vfio: ccw: push down unsupported IDA check
vfio: ccw: fix error return in vfio_ccw_sch_event
s390/archrandom: Rework arch random implementation.
s390/net: add pnetid support
Change the remaining users of dasd_kmalloc_request to use
preallocated memory and remove this function.
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Move some members of struct dasd_ccw_req to get rid of padding
bytes. This saves 16 bytes per dasd request.
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
There is no user of this function. Just remove it.
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Let the block layer allocate per request data to store
struct dasd_ccw_req. We still need extra preallocated
memory for usage by ccw programs (which vary in length)
and for requests which don't originate from the block
layer.
Link: https://lkml.kernel.org/r/20180530074130.GA6927@infradead.org
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Simplify locking in __dasd_device_process_final_queue to fix
the following sparse warning:
drivers/s390/block/dasd.c:1902:9: warning:
context imbalance in '__dasd_device_process_final_queue' - different lock contexts for basic block
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
at adding tracepoints.
-----BEGIN PGP SIGNATURE-----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=rUuD
-----END PGP SIGNATURE-----
Merge tag 'vfio-ccw-20180529' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into features
Pull vfio-ccw from Cornelia Huck with the following changes:
- Various fixes and improvements in vfio-ccw, including a first stab
at adding tracepoints.
This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc,
xfcp, hisi_sas, cxlflash, qla2xxx. In the absence of Nic, we're also
taking target updates which are mostly minor except for the tcmu
refactor. The only real core change to worry about is the removal of
high page bouncing (in sas, storvsc and iscsi). This has been well
tested and no problems have shown up so far.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCWx1pbCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishUucAP42pccS
ziKyiOizuxv9fZ4Q+nXd1A9zhI5tqqpkHjcQegEA40qiZSi3EKGKR8W0UpX7Ntmo
tqrZJGojx9lnrAM2RbQ=
=NMXg
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc,
xfcp, hisi_sas, cxlflash, qla2xxx.
In the absence of Nic, we're also taking target updates which are
mostly minor except for the tcmu refactor.
The only real core change to worry about is the removal of high page
bouncing (in sas, storvsc and iscsi). This has been well tested and no
problems have shown up so far"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (268 commits)
scsi: lpfc: update driver version to 12.0.0.4
scsi: lpfc: Fix port initialization failure.
scsi: lpfc: Fix 16gb hbas failing cq create.
scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc
scsi: lpfc: correct oversubscription of nvme io requests for an adapter
scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx)
scsi: hisi_sas: Mark PHY as in reset for nexus reset
scsi: hisi_sas: Fix return value when get_free_slot() failed
scsi: hisi_sas: Terminate STP reject quickly for v2 hw
scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command
scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot
scsi: hisi_sas: Try wait commands before before controller reset
scsi: hisi_sas: Init disks after controller reset
scsi: hisi_sas: Create a scsi_host_template per HW module
scsi: hisi_sas: Reset disks when discovered
scsi: hisi_sas: Add LED feature for v3 hw
scsi: hisi_sas: Change common allocation mode of device id
scsi: hisi_sas: change slot index allocation mode
scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate()
scsi: hisi_sas: fix a typo in hisi_sas_task_prep()
...
* DAX broke a fundamental assumption of truncate of file mapped pages.
The truncate path assumed that it is safe to disconnect a pinned page
from a file and let the filesystem reclaim the physical block. With DAX
the page is equivalent to the filesystem block. Introduce
dax_layout_busy_page() to enable filesystems to wait for pinned DAX
pages to be released. Without this wait a filesystem could allocate
blocks under active device-DMA to a new file.
* DAX arranges for the block layer to be bypassed and uses
dax_direct_access() + copy_to_iter() to satisfy read(2) calls.
However, the memcpy_mcsafe() facility is available through the pmem
block driver. In order to safely handle media errors, via the DAX
block-layer bypass, introduce copy_to_iter_mcsafe().
* Fix cache management policy relative to the ACPI NFIT Platform
Capabilities Structure to properly elide cache flushes when they are not
necessary. The table indicates whether CPU caches are power-fail
protected. Clarify that a deep flush is always performed on
REQ_{FUA,PREFLUSH} requests.
-----BEGIN PGP SIGNATURE-----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=4bfw
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"This adds a user for the new 'bytes-remaining' updates to
memcpy_mcsafe() that you already received through Ingo via the
x86-dax- for-linus pull.
Not included here, but still targeting this cycle, is support for
handling memory media errors (poison) consumed via userspace dax
mappings.
Summary:
- DAX broke a fundamental assumption of truncate of file mapped
pages. The truncate path assumed that it is safe to disconnect a
pinned page from a file and let the filesystem reclaim the physical
block. With DAX the page is equivalent to the filesystem block.
Introduce dax_layout_busy_page() to enable filesystems to wait for
pinned DAX pages to be released. Without this wait a filesystem
could allocate blocks under active device-DMA to a new file.
- DAX arranges for the block layer to be bypassed and uses
dax_direct_access() + copy_to_iter() to satisfy read(2) calls.
However, the memcpy_mcsafe() facility is available through the pmem
block driver. In order to safely handle media errors, via the DAX
block-layer bypass, introduce copy_to_iter_mcsafe().
- Fix cache management policy relative to the ACPI NFIT Platform
Capabilities Structure to properly elide cache flushes when they
are not necessary. The table indicates whether CPU caches are
power-fail protected. Clarify that a deep flush is always performed
on REQ_{FUA,PREFLUSH} requests"
* tag 'libnvdimm-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits)
dax: Use dax_write_cache* helpers
libnvdimm, pmem: Do not flush power-fail protected CPU caches
libnvdimm, pmem: Unconditionally deep flush on *sync
libnvdimm, pmem: Complete REQ_FLUSH => REQ_PREFLUSH
acpi, nfit: Remove ecc_unit_size
dax: dax_insert_mapping_entry always succeeds
libnvdimm, e820: Register all pmem resources
libnvdimm: Debug probe times
linvdimm, pmem: Preserve read-only setting for pmem devices
x86, nfit_test: Add unit test for memcpy_mcsafe()
pmem: Switch to copy_to_iter_mcsafe()
dax: Report bytes remaining in dax_iomap_actor()
dax: Introduce a ->copy_to_iter dax operation
uio, lib: Fix CONFIG_ARCH_HAS_UACCESS_MCSAFE compilation
xfs, dax: introduce xfs_break_dax_layouts()
xfs: prepare xfs_break_layouts() for another layout type
xfs: prepare xfs_break_layouts() to be called with XFS_MMAPLOCK_EXCL
mm, fs, dax: handle layout changes to pinned dax mappings
mm: fix __gup_device_huge vs unmap
mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS
...
Pull networking updates from David Miller:
1) Add Maglev hashing scheduler to IPVS, from Inju Song.
2) Lots of new TC subsystem tests from Roman Mashak.
3) Add TCP zero copy receive and fix delayed acks and autotuning with
SO_RCVLOWAT, from Eric Dumazet.
4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
Brouer.
5) Add ttl inherit support to vxlan, from Hangbin Liu.
6) Properly separate ipv6 routes into their logically independant
components. fib6_info for the routing table, and fib6_nh for sets of
nexthops, which thus can be shared. From David Ahern.
7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
messages from XDP programs. From Nikita V. Shirokov.
8) Lots of long overdue cleanups to the r8169 driver, from Heiner
Kallweit.
9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.
10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.
11) Plumb extack down into fib_rules, from Roopa Prabhu.
12) Add Flower classifier offload support to igb, from Vinicius Costa
Gomes.
13) Add UDP GSO support, from Willem de Bruijn.
14) Add documentation for eBPF helpers, from Quentin Monnet.
15) Add TLS tx offload to mlx5, from Ilya Lesokhin.
16) Allow applications to be given the number of bytes available to read
on a socket via a control message returned from recvmsg(), from
Soheil Hassas Yeganeh.
17) Add x86_32 eBPF JIT compiler, from Wang YanQing.
18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
From Björn Töpel.
19) Remove indirect load support from all of the BPF JITs and handle
these operations in the verifier by translating them into native BPF
instead. From Daniel Borkmann.
20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.
21) Allow XDP programs to do lookups in the main kernel routing tables
for forwarding. From David Ahern.
22) Allow drivers to store hardware state into an ELF section of kernel
dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.
23) Various RACK and loss detection improvements in TCP, from Yuchung
Cheng.
24) Add TCP SACK compression, from Eric Dumazet.
25) Add User Mode Helper support and basic bpfilter infrastructure, from
Alexei Starovoitov.
26) Support ports and protocol values in RTM_GETROUTE, from Roopa
Prabhu.
27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
Brouer.
28) Add lots of forwarding selftests, from Petr Machata.
29) Add generic network device failover driver, from Sridhar Samudrala.
* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
strparser: Add __strp_unpause and use it in ktls.
rxrpc: Fix terminal retransmission connection ID to include the channel
net: hns3: Optimize PF CMDQ interrupt switching process
net: hns3: Fix for VF mailbox receiving unknown message
net: hns3: Fix for VF mailbox cannot receiving PF response
bnx2x: use the right constant
Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
enic: fix UDP rss bits
netdev-FAQ: clarify DaveM's position for stable backports
rtnetlink: validate attributes in do_setlink()
mlxsw: Add extack messages for port_{un, }split failures
netdevsim: Add extack error message for devlink reload
devlink: Add extack to reload and port_{un, }split operations
net: metrics: add proper netlink validation
ipmr: fix error path when ipmr_new_table fails
ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
net: hns3: remove unused hclgevf_cfg_func_mta_filter
netfilter: provide udp*_lib_lookup for nf_tproxy
qed*: Utilize FW 8.37.2.0
...
