In short, we have three kinds of role switches:
- Based on SoC: ID and VBUS
- Based on external connnctor, eg, Type-C or GPIO Connector
- Based on user choices through sysfs
Since HW handling and usb-role-switch handling are at
different places, we do not need role_override any more,
and this flag could not judge external connector case well.
With role_override deleted, We use cdns3_hw_role_switch for
the 1st use case, and usb-role-switch for the 2nd and 3rd cases.
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
After that, the role switch device (eg, Type-C device) could call
cdns3_role_set to finish the role switch.
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
If there are still pending requests because no TRB was available,
prepare more when started requests are completed.
Introduce dwc3_gadget_ep_should_continue() to check for incomplete and
pending requests to resume updating new TRBs to the controller's TRB
cache.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Register vbus_draw to gadget ops and update corresponding vbus
draw current to usb_phy.
Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
If the driver issued START_TRANSFER and received a no-resource status,
then generally there are a few reasons for this:
1) The driver did not allocate resource for the endpoint during
power-on-reset initialization.
2) The transfer resource was reset. At this moment, we don't do this in
the driver, but it occurs when the driver issues START_CONFIG cmd to ep0
with resource index=2.
3) The driver issues the START_TRANSFER command to an already started
endpoint. Usually, this is because the END_TRANSFER command hasn't
completed yet.
Print out a warning to help debug this issue in the driver.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
After a number of unsuccessful start isoc attempts due to bus-expiry
status, issue END_TRANSFER command and retry on the next XferNotReady
event.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
As long as the START_TRANSFER command completes, it provides the
resource index of the endpoint. Use this when we need to issue
END_TRANSFER command to an isoc endpoint to retry with a new
XferNotReady event.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
If dwc3 fails to issue START_TRANSFER/UPDATE_TRANSFER command, then we
should properly end an active transfer and give back all the started
requests. However if it's for an isoc endpoint, the failure maybe due to
bus-expiry status. In this case, don't give back the requests and wait
for the next retry.
Fixes: 72246da40f ("usb: Introduce DesignWare USB3 DRD Driver")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
If the driver is configured to use DRD role-switch, let the drd code
path decide the default dr_mode.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
If the driver is configured to use DRD role-switch, it's not OTG. There
won't be OTG irq to free. Check for dwc->otg_irq before freeing it.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Refactor the USB2 PHY init code patch to handle the Amlogic GXL/GXM
not having the PHY mode control registers in the Glue but in the PHY
registers.
The Amlogic GXL/GXM will call phy_set_mode() instead of programming the
PHY mode control registers, thus add two new callbacks to the SoC match
data.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
The dwc3_meson_g12a_usb_init function can return an error, check it.
Fixes: c99993376f ("usb: dwc3: Add Amlogic G12A DWC3 glue")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
In order to support the Amlogic GXL/GXM SoCs, the reset line must
be handled as shared since also used by the PHYs.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
On the Amlogic GXL/GXM SoCs, only the USB control registers are available,
the PHY mode being handled in the PHY registers.
Thus, handle the PHY mode registers in separate regmaps and prepare
support for Amlogic GXL/GXM SoCs by moving the regmap setup in a callback
set in the SoC match data.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
To handle the variable USB2 PHY counts on GXL and GXM SoCs, add the
possible PHY names for each SoC in the compatible match data.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hanjie Lin <hanjie.lin@amlogic.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
The Amlogic GXL and GXM is slightly different from the Amlogic G12A Glue.
The GXL SoCs only embeds 2 USB2 PHYs and no USB3 PHYs, and the GXM SoCs
embeds 3 USB2 PHYs.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Add compatible for SC7180 in usb dwc3 bindings.
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Convert USB DWC3 bindings to DT schema format using json-schema.
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
The flow from function dwc3_gadget_ep_dequeue() is not easy to follow.
Refactor it for easier read. No functional change in this commit.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Remove 2 unnecessary checks:
1) A request in the started_list must have its trb field set. So
checking for req->trb is unnecessary.
2) An endpoint must have started (and have not ended) for the request to
still be in the started_list. There's no point to check if the endpoint
is started. We had this check because previously the driver didn't
handle the endpoint's started/ended flags for END_TRANSFER command
properly. See commit 9f45581f5e ("usb: dwc3: gadget: early giveback
if End Transfer already completed").
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
If a request is dequeued, the transfer is cancelled. Give back all
the started requests.
In most scenarios, the function driver dequeues all requests of a
transfer when there's a failure. If the function driver follows this,
then it's fine. If not, then we'd be skipping TRBs at different points
within the dequeue and enqueue pointers, making dequeue/enqueue pointers
useless. To enforce and make sure that we're properly skipping TRBs,
cancel all the started requests and give back all the cancelled requests
to the function drivers.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
DWC3 must not issue CLEAR_STALL command to control endpoints. The
controller automatically clears the STALL when it receives the SETUP
token. Also, when the driver receives ClearFeature(halt_ep), DWC3 must
stop any active transfer from the endpoint and give back all the
requests to the function drivers.
Fixes: 72246da40f ("usb: Introduce DesignWare USB3 DRD Driver")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Update device tree binding document for aspeed vhub's device IDs and
string properties.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
This patch moves patch-usb1-dev-desc logic from get-descriptor handler
to "ast_vhub_fixup_usb1_dev_desc" function so the code is executed only
once (at vhub initial time).
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
The patch overrides idVendor, idProduct and bcdDevice fields in vhub
Device Descriptor if according device tree properties are defined.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
If "vhub,string-descriptor" device tree property is defined, the driver
will load string descriptors from device tree; otherwise, the default
string descriptors will be used.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
The USB LANGID validation code in "check_user_usb_string" function is
moved to "usb_validate_langid" function which can be used by other usb
gadget drivers.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
This patch introduces a link list to store string descriptors with
different languages, and "ast_vhub_rep_string" function is also improved
to support multiple language usb strings.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
This patch evaluates vhub ports' irq mask before going through per-port
irq handling one by one, which helps to speed up irq handling in case
there is no port interrupt.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
The DRD module calls dwc3_set_mode() on role switches, i.e. when a device is
being plugged in. In order to support continuous runtime power management when
plugging in / unplugging a cable, we need to call pm_runtime_get_sync() in
this path.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Mark all local functions static to fix sparse warnings.
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
This patch corrects the SPDX License Identifier style in
header files related to DesignWare USB2 DRD Core Support.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used).
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
This patch corrects the SPDX License Identifier style in
header files related to DesignWare USB3 DRD Core Support.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used).
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
This patch corrects the SPDX License Identifier style in
header files related to USB peripheral controller drivers.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used).
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xn0p
-----END PGP SIGNATURE-----
Merge tag 'for-5.7-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull more btrfs fixes from David Sterba:
"A few more stability fixes, minor build warning fixes and git url
fixup:
- fix partial loss of prealloc extent past i_size after fsync
- fix potential deadlock due to wrong transaction handle passing via
journal_info
- fix gcc 4.8 struct intialization warning
- update git URL in MAINTAINERS entry"
* tag 'for-5.7-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
MAINTAINERS: btrfs: fix git repo URL
btrfs: fix gcc-4.8 build warning for struct initializer
btrfs: transaction: Avoid deadlock due to bad initialization timing of fs_info::journal_info
btrfs: fix partial loss of prealloc extent past i_size after fsync
Including:
- Fix for a memory leak when dev_iommu gets freed and a
sub-pointer does not.
- Build dependency fixes for Mediatek, spapr_tce, and
Intel IOMMU driver.
- Export iommu_group_get_for_dev() only for GPLed modules
- Fix for AMD IOMMU interrupt remapping when x2apic is
enabled
- Fix for error path in the QCOM IOMMU driver probe function
-----BEGIN PGP SIGNATURE-----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=UhNC
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- Fix a memory leak when dev_iommu gets freed and a sub-pointer does
not
- Build dependency fixes for Mediatek, spapr_tce, and Intel IOMMU
driver
- Export iommu_group_get_for_dev() only for GPLed modules
- Fix AMD IOMMU interrupt remapping when x2apic is enabled
- Fix error path in the QCOM IOMMU driver probe function
* tag 'iommu-fixes-v5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/qcom: Fix local_base status check
iommu: Properly export iommu_group_get_for_dev()
iommu/vt-d: Use right Kconfig option name
iommu/amd: Fix legacy interrupt remapping for x2APIC-enabled system
iommu: spapr_tce: Disable compile testing to fix build on book3s_32 config
iommu/mediatek: Fix MTK_IOMMU dependencies
iommu: Fix the memory leak in dev_iommu_free()
The git repo listed for btrfs hasn't been updated in over a year.
List the current one instead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Prevent the intel_pstate driver from printing excessive diagnostic
messages in some cases (Chris Wilson), make the hibernation restore
kernel freeze kernel threads as well as user space tasks (Dexuan Cui)
and fix the ACPI device PM disagnostic messages to include the correct
power state name (Kai-Heng Feng).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl6tzqwSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxm2sP/0qZTJNgR9QrA6V0J0qzvJDMhHtZ28nf
iNbhTMOC/0UlZFvO3ILFdX3iLnYbVdC/wOHdzAk0LetrLJAXmbdHxT6f9LgbaGcZ
CefiMxNFDCpwKU1FdZLQiqh7WEHeQK0R/khMYAudljzxp+ou4g6WdYBOhAzxCdoW
anDXJA6a8NIfUAfa/UyNL1amo7LTv7kRsipOY7DQNHt3ql0O+VXvJMaCnPzLUV1q
7kvn7KsebwurbErByrUPwv/YJN3xvIFrTl0Hc7FLMd+OT7bI6JKWWAXByABBSXxv
Ol/YbT7ruxVdlSAl0P1382i79VHCze9xd/r5o1Bv4HY3lIKWettGWTWRnNvA+upc
bNpebdj0to7S/9UQzjsUiGpzoMHeBcUSNoXczk6xhIuT1qTRcrCbVXKocw4kcUWM
W0HLAJfkBFYN687XyI+Kf+DfC/9kU6AQRetCkBw+2fHH83xw1hB8w0oW0PWQZh1X
R0ivuKHzWsOHAV+ijEil2Uuxzbm2sUIwAH3pxx99eGlIGH8W3TI1Ffxj4o9PSJk/
l4rOJyr1549PVOo8a6dE6etMzOGS/sl0O+MTGxdDUujeayCb6c2pLut9zGx772fR
zzXvYyxH38wJmRwv9lWNww5p+VGYYjbk4CjvifdePHoFIfFkXQH4HLKr/GiP+XaL
nmD/dCzykj9f
=SE5Q
-----END PGP SIGNATURE-----
Merge tag 'pm-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
- prevent the intel_pstate driver from printing excessive diagnostic
messages in some cases (Chris Wilson)
- make the hibernation restore kernel freeze kernel threads as well as
user space tasks (Dexuan Cui)
- fix the ACPI device PM disagnostic messages to include the correct
power state name (Kai-Heng Feng).
* tag 'pm-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: ACPI: Output correct message on target power state
PM: hibernate: Freeze kernel threads in software_resume()
cpufreq: intel_pstate: Only mention the BIOS disabling turbo mode once
- Move the FIBMAP range check and warning out of the backend iomap
implementation and into the frontend ioctl_fibmap so that the checking
is consistent for all implementations.
-----BEGIN PGP SIGNATURE-----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=6rBo
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.7-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap fix from Darrick Wong:
"Hoist the check for an unrepresentable FIBMAP return value into
ioctl_fibmap.
The internal kernel function can handle 64-bit values (and is needed
to fix a regression on ext4 + jbd2). It is only the userspace ioctl
that is so old that it cannot deal"
* tag 'iomap-5.7-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
fibmap: Warn and return an error in case of block > INT_MAX
Highlights include:
Stable fixes
- fix handling of backchannel binding in BIND_CONN_TO_SESSION
Bugfixes
- Fix a credential use-after-free issue in pnfs_roc()
- Fix potential posix_acl refcnt leak in nfs3_set_acl
- defer slow parts of rpc_free_client() to a workqueue
- Fix an Oopsable race in __nfs_list_for_each_server()
- Fix trace point use-after-free race
- Regression: the RDMA client no longer responds to server disconnect requests
- Fix return values of xdr_stream_encode_item_{present, absent}
- _pnfs_return_layout() must always wait for layoutreturn completion
Cleanups
- Remove unreachable error conditions
-----BEGIN PGP SIGNATURE-----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=w0zk
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.7-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Stable fixes:
- fix handling of backchannel binding in BIND_CONN_TO_SESSION
Bugfixes:
- Fix a credential use-after-free issue in pnfs_roc()
- Fix potential posix_acl refcnt leak in nfs3_set_acl
- defer slow parts of rpc_free_client() to a workqueue
- Fix an Oopsable race in __nfs_list_for_each_server()
- Fix trace point use-after-free race
- Regression: the RDMA client no longer responds to server disconnect
requests
- Fix return values of xdr_stream_encode_item_{present, absent}
- _pnfs_return_layout() must always wait for layoutreturn completion
Cleanups:
- Remove unreachable error conditions"
* tag 'nfs-for-5.7-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix a race in __nfs_list_for_each_server()
NFSv4.1: fix handling of backchannel binding in BIND_CONN_TO_SESSION
SUNRPC: defer slow parts of rpc_free_client() to a workqueue.
NFSv4: Remove unreachable error condition due to rpc_run_task()
SUNRPC: Remove unreachable error condition
xprtrdma: Fix use of xdr_stream_encode_item_{present, absent}
xprtrdma: Fix trace point use-after-free race
xprtrdma: Restore wake-up-all to rpcrdma_cm_event_handler()
nfs: Fix potential posix_acl refcnt leak in nfs3_set_acl
NFS/pnfs: Fix a credential use-after-free issue in pnfs_roc()
NFS/pnfs: Ensure that _pnfs_return_layout() waits for layoutreturn completion
Core:
- Documentation typo fixes
- fix the channel indexes
- Dmatest: fixes for process hang and iterations
Drivers:
- hisilicon: build error fix without PCI_MSI
- ti-k3: deadlock fix
- uniphier-xdmac: fix for reg region
- pch: fix data race
- tegra: fix clock state
-----BEGIN PGP SIGNATURE-----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=py+J
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-5.7-rc4' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"Core:
- Documentation typo fixes
- fix the channel indexes
- dmatest: fixes for process hang and iterations
Drivers:
- hisilicon: build error fix without PCI_MSI
- ti-k3: deadlock fix
- uniphier-xdmac: fix for reg region
- pch: fix data race
- tegra: fix clock state"
* tag 'dmaengine-fix-5.7-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: dmatest: Fix process hang when reading 'wait' parameter
dmaengine: dmatest: Fix iteration non-stop logic
dmaengine: tegra-apb: Ensure that clock is enabled during of DMA synchronization
dmaengine: fix channel index enumeration
dmaengine: mmp_tdma: Reset channel error on release
dmaengine: mmp_tdma: Do not ignore slave config validation errors
dmaengine: pch_dma.c: Avoid data race between probe and irq handler
dt-bindings: dma: uniphier-xdmac: switch to single reg region
include/linux/dmaengine: Typos fixes in API documentation
dmaengine: xilinx_dma: Add missing check for empty list
dmaengine: ti: k3-psil: fix deadlock on error path
dmaengine: hisilicon: Fix build error without PCI_MSI
- copy_*_user validity check for new vfio_dma_rw interface (Yan Zhao)
- Fix a potential math overflow (Yan Zhao)
- Use follow_pfn() for calculating PFNMAPs (Sean Christopherson)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=L+OC
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.7-rc4' of git://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- copy_*_user validity check for new vfio_dma_rw interface (Yan Zhao)
- Fix a potential math overflow (Yan Zhao)
- Use follow_pfn() for calculating PFNMAPs (Sean Christopherson)
* tag 'vfio-v5.7-rc4' of git://github.com/awilliam/linux-vfio:
vfio/type1: Fix VA->PA translation for PFNMAP VMAs in vaddr_get_pfn()
vfio: avoid possible overflow in vfio_iommu_type1_pin_pages
vfio: checking of validity of user vaddr in vfio_dma_rw
-----BEGIN PGP SIGNATURE-----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=cZOE
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.7-2020-05-01' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Fix for statx not grabbing the file table, making AT_EMPTY_PATH fail
- Cover a few cases where async poll can handle retry, eliminating the
need for an async thread
- fallback request busy/free fix (Bijan)
- syzbot reported SQPOLL thread exit fix for non-preempt (Xiaoguang)
- Fix extra put of req for sync_file_range (Pavel)
- Always punt splice async. We'll improve this for 5.8, but wanted to
eliminate the inode mutex lock from the non-blocking path for 5.7
(Pavel)
* tag 'io_uring-5.7-2020-05-01' of git://git.kernel.dk/linux-block:
io_uring: punt splice async because of inode mutex
io_uring: check non-sync defer_list carefully
io_uring: fix extra put in sync_file_range()
io_uring: use cond_resched() in io_ring_ctx_wait_and_kill()
io_uring: use proper references for fallback_req locking
io_uring: only force async punt if poll based retry can't handle it
io_uring: enable poll retry for any file with ->read_iter / ->write_iter
io_uring: statx must grab the file table for valid fd
-----BEGIN PGP SIGNATURE-----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=hQ0f
-----END PGP SIGNATURE-----
Merge tag 'block-5.7-2020-05-01' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes for this release:
- NVMe pull request from Christoph, with a single fix for a double
free in the namespace error handling.
- Kill the bd_openers check in blk_drop_partitions(), fixing a
regression in this merge window (Christoph)"
* tag 'block-5.7-2020-05-01' of git://git.kernel.dk/linux-block:
block: remove the bd_openers checks in blk_drop_partitions
nvme: prevent double free in nvme_alloc_ns() error handling
Pull i2c fixes from Wolfram Sang:
"Three driver bugfixes, and two reverts because the original patches
revealed underlying problems which the Tegra guys are now working on"
* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: aspeed: Avoid i2c interrupt status clear race condition.
i2c: amd-mp2-pci: Fix Oops in amd_mp2_pci_init() error handling
Revert "i2c: tegra: Better handle case where CPU0 is busy for a long time"
Revert "i2c: tegra: Synchronize DMA before termination"
i2c: iproc: generate stop event for slave writes
Just a collection of small fixes around this time.
- One more try for fixing PCM OSS regression
- HD-audio: a new quirk for Lenovo, the improved driver blacklisting,
a lock fix in the minor error path, and a fix for the possible race
at monitor notifiaction
- USB-audio: a quirk ID fix, a fix for POD HD500 workaround
-----BEGIN PGP SIGNATURE-----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=ePLE
-----END PGP SIGNATURE-----
Merge tag 'sound-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a collection of small fixes around this time:
- One more try for fixing PCM OSS regression
- HD-audio: a new quirk for Lenovo, the improved driver blacklisting,
a lock fix in the minor error path, and a fix for the possible race
at monitor notifiaction
- USB-audio: a quirk ID fix, a fix for POD HD500 workaround"
* tag 'sound-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Correct a typo of NuPrime DAC-10 USB ID
ALSA: opti9xx: shut up gcc-10 range warning
ALSA: hda/hdmi: fix without unlocked before return
ALSA: hda/hdmi: fix race in monitor detection during probe
ALSA: hda/realtek - Two front mics on a Lenovo ThinkCenter
ALSA: line6: Fix POD HD500 audio playback
ALSA: pcm: oss: Place the plugin buffer overflow checks correctly (for 5.7)
ALSA: pcm: oss: Place the plugin buffer overflow checks correctly
ALSA: hda: Match both PCI ID and SSID for driver blacklist
