Currently, the results for individial parameters in a parameterised test
are simply output as (K)TAP diagnostic lines.
As kunit_tool now supports nested subtests, report each parameter as its
own subtest.
For example, here's what the output now looks like:
# Subtest: inode_test_xtimestamp_decoding
ok 1 - 1901-12-13 Lower bound of 32bit < 0 timestamp, no extra bits
ok 2 - 1969-12-31 Upper bound of 32bit < 0 timestamp, no extra bits
ok 3 - 1970-01-01 Lower bound of 32bit >=0 timestamp, no extra bits
ok 4 - 2038-01-19 Upper bound of 32bit >=0 timestamp, no extra bits
ok 5 - 2038-01-19 Lower bound of 32bit <0 timestamp, lo extra sec bit on
ok 6 - 2106-02-07 Upper bound of 32bit <0 timestamp, lo extra sec bit on
ok 7 - 2106-02-07 Lower bound of 32bit >=0 timestamp, lo extra sec bit on
ok 8 - 2174-02-25 Upper bound of 32bit >=0 timestamp, lo extra sec bit on
ok 9 - 2174-02-25 Lower bound of 32bit <0 timestamp, hi extra sec bit on
ok 10 - 2242-03-16 Upper bound of 32bit <0 timestamp, hi extra sec bit on
ok 11 - 2242-03-16 Lower bound of 32bit >=0 timestamp, hi extra sec bit on
ok 12 - 2310-04-04 Upper bound of 32bit >=0 timestamp, hi extra sec bit on
ok 13 - 2310-04-04 Upper bound of 32bit>=0 timestamp, hi extra sec bit 1. 1 ns
ok 14 - 2378-04-22 Lower bound of 32bit>= timestamp. Extra sec bits 1. Max ns
ok 15 - 2378-04-22 Lower bound of 32bit >=0 timestamp. All extra sec bits on
ok 16 - 2446-05-10 Upper bound of 32bit >=0 timestamp. All extra sec bits on
# inode_test_xtimestamp_decoding: pass:16 fail:0 skip:0 total:16
ok 1 - inode_test_xtimestamp_decoding
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
It's possible that a parameterised test could end up with zero
parameters. At the moment, the test function will nevertheless be called
with NULL as the parameter. Instead, don't try to run the test code, and
just mark the test as SKIPped.
Reported-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Update complete_and_exit to call kthread_exit instead of do_exit.
Change the name to reflect this change in functionality. All of the
users of complete_and_exit are causing the current kthread to exit so
this change makes it clear what is happening.
Move the implementation of kthread_complete_and_exit from
kernel/exit.c to to kernel/kthread.c. As this function is kthread
specific it makes most sense to live with the kthread functions.
There are no functional change.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
There are some KUnit tests (KFENCE, Thunderbolt) which, for various
reasons, do not use the kunit_test_suite() macro and end up running
before the KUnit executor runs its tests. This means that their results
are printed separately, and they aren't included in the suite count used
by the executor.
This causes the executor output to be invalid TAP, however, as the suite
numbers used are no-longer 1-based, and don't match the test plan.
kunit_tool, therefore, prints a large number of warnings.
While it'd be nice to fix the tests to run in the executor, in the
meantime, reset the suite counter to 1 in __kunit_test_suites_exit.
Not only does this fix the executor, it means that if there are multiple
calls to __kunit_test_suites_init() across different tests, they'll each
get their own numbering.
kunit_tool likes this better: even if it's lacking the results for those
tests which don't use the executor (due to the lack of TAP header), the
output for the other tests is valid.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Context:
It's difficult to map a given .kunitconfig => set of enabled tests.
Letting kunit.py figure that out would be useful.
This patch:
* is intended to be an implementation detail used only by kunit.py
* adds a kunit.action module param with one valid non-null value, "list"
* for the "list" action, it simply prints out "<suite>.<test>"
* leaves the kunit.py changes to make use of this for another patch.
Note: kunit.filter_glob is respected for this and all future actions.
Hack: we print a TAP header (but no test plan) to allow kunit.py to
use the same code to pick up KUnit output that it does for normal tests.
Since this is intended to be an implementation detail, it seems fine for
now. Maybe in the future we output each test as SKIPPED or the like.
Go with a more generic "action" param, since it seems like we might
eventually have more modes besides just running or listing tests, e.g.
* perhaps a benchmark mode that reruns test cases and reports timing
* perhaps a deflake mode that reruns test cases that failed
* perhaps a mode where we randomize test order to try and catch
hermeticity bugs like "test a only passes if run after test b"
Tested:
$ ./tools/testing/kunit/kunit.py run --kernel_arg=kunit.action=list --raw_output=kunit
...
TAP version 14
1..1
example.example_simple_test
example.example_skip_test
example.example_mark_skipped_test
reboot: System halted
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When a user filters by a suite and not a test, e.g.
$ ./tools/testing/kunit/kunit.py run 'suite_name'
it hits this code
const int len = strlen(filter_glob);
...
parsed->suite_glob = kmalloc(len, GFP_KERNEL);
which fails to allocate space for the terminating NULL.
Somehow, it seems like we can't easily reproduce this under UML, so the
existing `parse_filter_test()` didn't catch this.
Fix this by allocating `len + 1` and switch to kzalloc() just to be a
bit more defensive. We're only going to run this code once per kernel
boot, and it should never be very long.
Also update the unit tests to be a bit more cautious.
This bug showed up as a NULL pointer dereference here:
> KUNIT_EXPECT_STREQ(test, (const char *)filtered.start[0][0]->name, "suite0");
`filtered.start[0][0]` was NULL, and `name` is at offset 0 in the struct,
so `...->name` was also NULL.
Fixes: 3b29021ddd10 ("kunit: tool: allow filtering test cases via glob")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 1d71307a6f ("kunit: add unit test for filtering suites by
names") introduced the ability to filter which suites we run via glob.
This change extends it so we can also filter individual test cases
inside of suites as well.
This is quite useful when, e.g.
* trying to run just the tests cases you've just added or are working on
* trying to debug issues with test hermeticity
Examples:
$ ./tools/testing/kunit/kunit.py run --kunitconfig=lib/kunit '*exec*.parse*'
...
============================================================
======== [PASSED] kunit_executor_test ========
[PASSED] parse_filter_test
============================================================
Testing complete. 1 tests run. 0 failed. 0 crashed.
$ ./tools/testing/kunit/kunit.py run --kunitconfig=lib/kunit '*.no_matching_tests'
...
[ERROR] no tests run!
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This test assumes that the declared kunit_suite object is the exact one
which is being executed, which KUnit will not guarantee [1].
Specifically, `suite->log` is not initialized until a suite object is
executed. So if KUnit makes a copy of the suite and runs that instead,
this test dereferences an invalid pointer and (hopefully) segfaults.
N.B. since we no longer assume this, we can no longer verify that
`suite->log` is *not* allocated during normal execution.
An alternative to this patch that would allow us to test that would
require exposing an API for the current test to get its current suite.
Exposing that for one internal kunit test seems like overkill, and
grants users more footguns (e.g. reusing a test case in multiple suites
and changing behavior based on the suite name, dynamically modifying the
setup/cleanup funcs, storing/reading stuff out of the suite->log, etc.).
[1] In a subsequent patch, KUnit will allow running subsets of test
cases within a suite by making a copy of the suite w/ the filtered test
list. But there are other reasons KUnit might execute a copy, e.g. if it
ever wants to support parallel execution of different suites, recovering
from errors and restarting suites
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The reference counting issue happens in the normal path of
kfree_at_end(). When kunit_alloc_and_get_resource() is invoked, the
function forgets to handle the returned resource object, whose refcount
increased inside, causing a refcount leak.
Fix this issue by calling kunit_alloc_resource() instead of
kunit_alloc_and_get_resource().
Fixed the following when applying:
Shuah Khan <skhan@linuxfoundation.org>
CHECK: Alignment should match open parenthesis
+ kunit_alloc_resource(test, NULL, kfree_res_free, GFP_KERNEL,
(void *)to_free);
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
-----BEGIN PGP SIGNATURE-----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=lw3M
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
* tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kbuild: redo fake deps at include/ksym/*.h
kbuild: clean up objtool_args slightly
modpost: get the *.mod file path more simply
checkkconfigsymbols.py: Fix the '--ignore' option
kbuild: merge vmlinux_link() between ARCH=um and other architectures
kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh
kbuild: merge vmlinux_link() between the ordinary link and Clang LTO
kbuild: remove stale *.symversions
kbuild: remove unused quiet_cmd_update_lto_symversions
gen_compile_commands: extract compiler command from a series of commands
x86: remove cc-option-yn test for -mtune=
arc: replace cc-option-yn uses with cc-option
s390: replace cc-option-yn uses with cc-option
ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild
sparc: move the install rule to arch/sparc/Makefile
security: remove unneeded subdir-$(CONFIG_...)
kbuild: sh: remove unused install script
kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y
kbuild: Switch to 'f' variants of integrated assembler flag
kbuild: Shuffle blank line to improve comment meaning
...
Ship minimal stdarg.h (1 type, 4 macros) as <linux/stdarg.h>.
stdarg.h is the only userspace header commonly used in the kernel.
GPL 2 version of <stdarg.h> can be extracted from
http://archive.debian.org/debian/pool/main/g/gcc-4.2/gcc-4.2_4.2.4.orig.tar.gz
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When a number of tests fail, it can be useful to get higher-level
statistics of how many tests are failing (or how many parameters are
failing in parameterised tests), and in what cases or suites. This is
already done by some non-KUnit tests, so add support for automatically
generating these for KUnit tests.
This change adds a 'kunit.stats_enabled' switch which has three values:
- 0: No stats are printed (current behaviour)
- 1: Stats are printed only for tests/suites with more than one
subtest (new default)
- 2: Always print test statistics
For parameterised tests, the summary line looks as follows:
" # inode_test_xtimestamp_decoding: pass:16 fail:0 skip:0 total:16"
For test suites, there are two lines looking like this:
"# ext4_inode_test: pass:1 fail:0 skip:0 total:1"
"# Totals: pass:16 fail:0 skip:0 total:16"
The first line gives the number of direct subtests, the second "Totals"
line is the accumulated sum of all tests and test parameters.
This format is based on the one used by kselftest[1].
[1]: https://elixir.bootlin.com/linux/latest/source/tools/testing/selftests/kselftest.h#L109
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This KUnit update for Linux 5.14-rc1 consists of fixes and features:
-- add support for skipped tests
-- introduce kunit_kmalloc_array/kunit_kcalloc() helpers
-- add gnu_printf specifiers
-- add kunit_shutdown
-- add unit test for filtering suites by names
-- convert lib/test_list_sort.c to use KUnit
-- code organization moving default config to tools/testing/kunit
-- refactor of internal parser input handling
-- cleanups and updates to documentation
-- code cleanup related to casts
-----BEGIN PGP SIGNATURE-----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=5QAv
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit update from Shuah Khan:
"Fixes and features:
- add support for skipped tests
- introduce kunit_kmalloc_array/kunit_kcalloc() helpers
- add gnu_printf specifiers
- add kunit_shutdown
- add unit test for filtering suites by names
- convert lib/test_list_sort.c to use KUnit
- code organization moving default config to tools/testing/kunit
- refactor of internal parser input handling
- cleanups and updates to documentation
- code cleanup related to casts"
* tag 'linux-kselftest-kunit-fixes-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits)
kunit: add unit test for filtering suites by names
kasan: test: make use of kunit_skip()
kunit: test: Add example tests which are always skipped
kunit: tool: Support skipped tests in kunit_tool
kunit: Support skipped tests
thunderbolt: test: Reinstate a few casts of bitfields
kunit: tool: internal refactor of parser input handling
lib/test: convert lib/test_list_sort.c to use KUnit
kunit: introduce kunit_kmalloc_array/kunit_kcalloc() helpers
kunit: Remove the unused all_tests.config
kunit: Move default config from arch/um -> tools/testing/kunit
kunit: arch/um/configs: Enable KUNIT_ALL_TESTS by default
kunit: Add gnu_printf specifiers
lib/cmdline_kunit: Remove a cast which are no-longer required
kernel/sysctl-test: Remove some casts which are no-longer required
thunderbolt: test: Remove some casts which are no longer required
mmc: sdhci-of-aspeed: Remove some unnecessary casts from KUnit tests
iio: Remove a cast in iio-test-format which is no longer required
device property: Remove some casts in property-entry-test
Documentation: kunit: Clean up some string casts in examples
...
The upcoming SLUB kunit test will be calling kunit_find_named_resource()
from a context with disabled interrupts. That means kunit's test->lock
needs to be IRQ safe to avoid potential deadlocks and lockdep splats.
This patch therefore changes the test->lock usage to spin_lock_irqsave()
and spin_unlock_irqrestore().
Link: https://lkml.kernel.org/r/20210511150734.3492-1-glittao@gmail.com
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Oliver Glitta <glittao@gmail.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Marco Elver <elver@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds unit tests for kunit_filter_subsuite() and
kunit_filter_suites().
Note: what the executor means by "subsuite" is the array of suites
corresponding to each test file.
This patch lightly refactors executor.c to avoid the use of global
variables to make it testable.
It also includes a clever `kfree_at_end()` helper that makes this test
easier to write than it otherwise would have been.
Tested by running just the new tests using itself
$ ./tools/testing/kunit/kunit.py run '*exec*'
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add two new tests to the example test suite, both of which are always
skipped. This is used as an example for how to write tests which are
skipped, and to demonstrate the difference between kunit_skip() and
kunit_mark_skipped().
Note that these tests are enabled by default, so a default run of KUnit
will have two skipped tests.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The kunit_mark_skipped() macro marks the current test as "skipped", with
the provided reason. The kunit_skip() macro will mark the test as
skipped, and abort the test.
The TAP specification supports this "SKIP directive" as a comment after
the "ok" / "not ok" for a test. See the "Directives" section of the TAP
spec for details:
https://testanything.org/tap-specification.html#directives
The 'success' field for KUnit tests is replaced with a kunit_status
enum, which can be SUCCESS, FAILURE, or SKIPPED, combined with a
'status_comment' containing information on why a test was skipped.
A new 'kunit_status' test suite is added to test this.
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Marco Elver <elver@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add in:
* kunit_kmalloc_array() and wire up kunit_kmalloc() to be a special
case of it.
* kunit_kcalloc() for symmetry with kunit_kzalloc()
This should using KUnit more natural by making it more similar to the
existing *alloc() APIs.
And while we shouldn't necessarily be writing unit tests where overflow
should be a concern, it can't hurt to be safe.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Some KUnit functions use variable arguments to implement a printf-like
format string. Use the __printf() attribute to let the compiler warn if
invalid format strings are passed in.
If the kernel is build with W=1, it complained about the lack of these
specifiers, e.g.:
../lib/kunit/test.c:72:2: warning: function ‘kunit_log_append’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a new kernel command-line option, 'kunit_shutdown', which allows the
user to specify that the kernel poweroff, halt, or reboot after
completing all KUnit tests; this is very handy for running KUnit tests
on UML or a VM so that the UML/VM process exits cleanly immediately
after running all tests without needing a special initramfs.
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-By: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When one parameter of a parameterised test failed, its failure would be
propagated to the overall test, but not to the suite result (unless it
was the last parameter).
This is because test_case->success was being reset to the test->success
result after each parameter was used, so a failing test's result would
be overwritten by a non-failing result. The overall test result was
handled in a third variable, test_result, but this was discarded after
the status line was printed.
Instead, just propagate the result after each parameter run.
Signed-off-by: David Gow <davidgow@google.com>
Fixes: fadb08e7c7 ("kunit: Support for Parameterized Testing")
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a kunit_fail_current_test() function to fail the currently running
test, if any, with an error message.
This is largely intended for dynamic analysis tools like UBSAN and for
fakes.
E.g. say I had a fake ops struct for testing and I wanted my `free`
function to complain if it was called with an invalid argument, or
caught a double-free. Most return void and have no normal means of
signalling failure (e.g. super_operations, iommu_ops, etc.).
Key points:
* Always update current->kunit_test so anyone can use it.
* commit 83c4e7a036 ("KUnit: KASAN Integration") only updated it for
CONFIG_KASAN=y
* Create a new header <kunit/test-bug.h> so non-test code doesn't have
to include all of <kunit/test.h> (e.g. lib/ubsan.c)
* Forward the file and line number to make it easier to track down
failures
* Declare the helper function for nice __printf() warnings about mismatched
format strings even when KUnit is not enabled.
Example output from kunit_fail_current_test("message"):
[15:19:34] [FAILED] example_simple_test
[15:19:34] # example_simple_test: initializing
[15:19:34] # example_simple_test: lib/kunit/kunit-example-test.c:24: message
[15:19:34] not ok 1 - example_simple_test
Fixed minor check patch with checkpatch --fix option:
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Uriel Guajardo <urielguajardo@google.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
TL;DR
$ ./tools/testing/kunit/kunit.py run --kunitconfig=lib/kunit
Per suggestion from Ted [1], we can reduce the amount of typing by
assuming a convention that these files are named '.kunitconfig'.
In the case of [1], we now have
$ ./tools/testing/kunit/kunit.py run --kunitconfig=fs/ext4
Also add in such a fragment for kunit itself so we can give that as an
example more close to home (and thus less likely to be accidentally
broken).
[1] https://lore.kernel.org/linux-ext4/YCNF4yP1dB97zzwD@mit.edu/
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Before:
> Expected str == "world", but
> str == hello
> "world" == world
After:
> Expected str == "world", but
> str == "hello"
<we don't need to tell the user that "world" == "world">
Note: like the literal ellision for integers, this doesn't handle the
case of
KUNIT_EXPECT_STREQ(test, "hello", "world")
since we don't expect it to realistically happen in checked in tests.
(If you really wanted a test to fail, KUNIT_FAIL("msg") exists)
In that case, you'd get:
> Expected "hello" == "world", but
<output for next failure>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Tidy up code by fixing the following checkpatch warnings:
CHECK: Alignment should match open parenthesis
CHECK: Lines should not end with a '('
Signed-off-by: Lucas Stankus <lucas.p.stankus@gmail.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
E.g. specifying this would run suites with "list" in their name.
kunit.filter_glob=list*
Note: the executor prints out a TAP header that includes the number of
suites we intend to run.
So unless we want to report empty results for filtered-out suites, we
need to do the filtering here in the executor.
It's also probably better in the executor since we most likely don't
want any filtering to apply to tests built as modules.
This code does add a CONFIG_GLOB=y dependency for CONFIG_KUNIT=y.
But the code seems light enough that it shouldn't be an issue.
For now, we only filter on suite names so we don't have to create copies
of the suites themselves, just the array (of arrays) holding them.
The name is rather generic since in the future, we could consider
extending it to a syntax like:
kunit.filter_glob=<suite_glob>.<test_glob>
E.g. to run all the del list tests
kunit.filter_glob=list-kunit-test.*del*
But at the moment, it's far easier to manually comment out test cases in
test files as opposed to messing with sets of Kconfig entries to select
specific suites.
So even just doing this makes using kunit far less annoying.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, given something (fairly dystopian) like
> KUNIT_EXPECT_EQ(test, 2 + 2, 5)
KUnit will prints a failure message like this.
> Expected 2 + 2 == 5, but
> 2 + 2 == 4
> 5 == 5
With this patch, the output just becomes
> Expected 2 + 2 == 5, but
> 2 + 2 == 4
This patch is slightly hacky, but it's quite common* to compare an
expression to a literal integer value, so this can make KUnit less
chatty in many cases. (This patch also fixes variants like
KUNIT_EXPECT_GT, LE, et al.).
It also allocates an additional string briefly, but given this only
happens on test failures, it doesn't seem too bad a tradeoff.
Also, in most cases it'll realize the lengths are unequal and bail out
before the allocation.
We could save the result of the formatted string to avoid wasting this
extra work, but it felt cleaner to leave it as-is.
Edge case: for something silly and unrealistic like
> KUNIT_EXPECT_EQ(test, 4, 5);
It'll generate this message with a trailing "but"
> Expected 4 == 5, but
> <next line of normal output>
It didn't feel worth adding a check up-front to see if both sides are
literals to handle this better.
*A quick grep suggests 100+ comparisons to an integer literal as the
right hand side.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Tested-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Implementation of support for parameterized testing in KUnit. This
approach requires the creation of a test case using the
KUNIT_CASE_PARAM() macro that accepts a generator function as input.
This generator function should return the next parameter given the
previous parameter in parameterized tests. It also provides a macro to
generate common-case generators based on arrays. Generators may also
optionally provide a human-readable description of parameters, which is
displayed where available.
Note, currently the result of each parameter run is displayed in
diagnostic lines, and only the overall test case output summarizes
TAP-compliant success or failure of all parameter runs. In future, when
supported by kunit-tool, these can be turned into subsubtest outputs.
Signed-off-by: Arpitha Raghunandan <98.arpi@gmail.com>
Co-developed-by: Marco Elver <elver@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This Kunit update for Linux 5.10-rc1 consists of:
- add Kunit to kernel_init() and remove KUnit from init calls entirely.
This addresses the concern Kunit would not work correctly during
late init phase.
- add a linker section where KUnit can put references to its test suites.
This patch is the first step in transitioning to dispatching all KUnit
tests from a centralized executor rather than having each as its own
separate late_initcall.
- add a centralized executor to dispatch tests rather than relying on
late_initcall to schedule each test suite separately. Centralized
execution is for built-in tests only; modules will execute tests when
loaded.
- convert bitfield test to use KUnit framework
- Documentation updates for naming guidelines and how kunit_test_suite()
works.
- add test plan to KUnit TAP format
-----BEGIN PGP SIGNATURE-----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=0Sco
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull more Kunit updates from Shuah Khan:
- add Kunit to kernel_init() and remove KUnit from init calls entirely.
This addresses the concern that Kunit would not work correctly during
late init phase.
- add a linker section where KUnit can put references to its test
suites.
This is the first step in transitioning to dispatching all KUnit
tests from a centralized executor rather than having each as its own
separate late_initcall.
- add a centralized executor to dispatch tests rather than relying on
late_initcall to schedule each test suite separately. Centralized
execution is for built-in tests only; modules will execute tests when
loaded.
- convert bitfield test to use KUnit framework
- Documentation updates for naming guidelines and how
kunit_test_suite() works.
- add test plan to KUnit TAP format
* tag 'linux-kselftest-kunit-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
lib: kunit: Fix compilation test when using TEST_BIT_FIELD_COMPILE
lib: kunit: add bitfield test conversion to KUnit
Documentation: kunit: add a brief blurb about kunit_test_suite
kunit: test: add test plan to KUnit TAP format
init: main: add KUnit to kernel init
kunit: test: create a single centralized executor for all tests
vmlinux.lds.h: add linker section for KUnit test suites
Documentation: kunit: Add naming guidelines
Integrate KASAN into KUnit testing framework.
- Fail tests when KASAN reports an error that is not expected
- Use KUNIT_EXPECT_KASAN_FAIL to expect a KASAN error in KASAN
tests
- Expected KASAN reports pass tests and are still printed when run
without kunit_tool (kunit_tool still bypasses the report due to the
test passing)
- KUnit struct in current task used to keep track of the current
test from KASAN code
Make use of "[PATCH v3 kunit-next 1/2] kunit: generalize kunit_resource
API beyond allocated resources" and "[PATCH v3 kunit-next 2/2] kunit: add
support for named resources" from Alan Maguire [1]
- A named resource is added to a test when a KASAN report is
expected
- This resource contains a struct for kasan_data containing
booleans representing if a KASAN report is expected and if a
KASAN report is found
[1] (https://lore.kernel.org/linux-kselftest/1583251361-12748-1-git-send-email-alan.maguire@oracle.com/T/#t)
Signed-off-by: Patricia Alfonso <trishalfonso@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20200915035828.570483-3-davidgow@google.com
Link: https://lkml.kernel.org/r/20200910070331.3358048-3-davidgow@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
TAP 14 allows an optional test plan to be emitted before the start of
the start of testing[1]; this is valuable because it makes it possible
for a test harness to detect whether the number of tests run matches the
number of tests expected to be run, ensuring that no tests silently
failed.
Link[1]: https://github.com/isaacs/testanything.github.io/blob/tap14/tap-version-14-specification.md#the-plan
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Although we have not seen any actual examples where KUnit doesn't work
because it runs in the late init phase of the kernel, it has been a
concern for some time that this could potentially be an issue in the
future. So, remove KUnit from init calls entirely, instead call directly
from kernel_init() so that KUnit runs after late init.
Co-developed-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a centralized executor to dispatch tests rather than relying on
late_initcall to schedule each test suite separately. Centralized
execution is for built-in tests only; modules will execute tests when
loaded.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Co-developed-by: Iurii Zaikin <yzaikin@google.com>
Signed-off-by: Iurii Zaikin <yzaikin@google.com>
Co-developed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The kunit resources API allows for custom initialization and
cleanup code (init/fini); here a new resource add function sets
the "struct kunit_resource" "name" field, and calls the standard
add function. Having a simple way to name resources is
useful in cases such as multithreaded tests where a set of
resources are shared among threads; a pointer to the
"struct kunit *" test state then is all that is needed to
retrieve and use named resources. Support is provided to add,
find and destroy named resources; the latter two are simply
wrappers that use a "match-by-name" callback.
If an attempt to add a resource with a name that already exists
is made kunit_add_named_resource() will return -EEXIST.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In its original form, the kunit resources API - consisting the
struct kunit_resource and associated functions - was focused on
adding allocated resources during test operation that would be
automatically cleaned up on test completion.
The recent RFC patch proposing converting KASAN tests to KUnit [1]
showed another potential model - where outside of test context,
but with a pointer to the test state, we wish to access/update
test-related data, but expressly want to avoid allocations.
It turns out we can generalize the kunit_resource to support
static resources where the struct kunit_resource * is passed
in and initialized for us. As part of this work, we also
change the "allocation" field to the more general "data" name,
as instead of associating an allocation, we can associate a
pointer to static data. Static data is distinguished by a NULL
free functions. A test is added to cover using kunit_add_resource()
with a static resource and data.
Finally we also make use of the kernel's krefcount interfaces
to manage reference counting of KUnit resources. The motivation
for this is simple; if we have kernel threads accessing and
using resources (say via kunit_find_resource()) we need to
ensure we do not remove said resources (or indeed free them
if they were dynamically allocated) until the reference count
reaches zero. A new function - kunit_put_resource() - is
added to handle this, and it should be called after a
thread using kunit_find_resource() is finished with the
retrieved resource.
We ensure that the functions needed to look up, use and
drop reference count are "static inline"-defined so that
they can be used by builtin code as well as modules in
the case that KUnit is built as a module.
A cosmetic change here also; I've tried moving to
kunit_[action]_resource() as the format of function names
for consistency and readability.
[1] https://lkml.org/lkml/2020/2/26/1286
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This makes it easier to enable all KUnit fragments.
Adding 'if !KUNIT_ALL_TESTS' so individual tests can not be turned off.
Therefore if KUNIT_ALL_TESTS is enabled that will hide the prompt in
menuconfig.
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Make it easier to enable all KUnit fragments. This is useful for kernel
devs or testers, so its easy to get all KUnit tests enabled and if new
gets added they will be enabled as well. Fragments that has to be
builtin will be missed if CONFIG_KUNIT_ALL_TESTS is set as a module.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add missing newline, as otherwise flushing of the final summary message
to the console log can be delayed.
Fixes: e2219db280 ("kunit: add debugfs /sys/kernel/debug/kunit/<suite>/results display")
Signed-off-by: Marco Elver <elver@google.com>
Tested-by: David Gow <davidgow@google.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Introduce KUNIT_SUBTEST_INDENT macro which corresponds to 4-space
indentation and KUNIT_SUBSUBTEST_INDENT macro which corresponds to
8-space indentation in line with TAP spec (e.g. see "Subtests"
section of https://node-tap.org/tap-protocol/).
Use these macros in place of one or two tabs in strings to clarify
why we are indenting.
Suggested-by: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
the logging test ensures multiple strings logged appear in the
log string associated with the test when CONFIG_KUNIT_DEBUGFS is
enabled.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
add debugfs support for displaying kunit test suite results; this is
especially useful for module-loaded tests to allow disentangling of
test result display from other dmesg events. debugfs support is
provided if CONFIG_KUNIT_DEBUGFS=y.
As well as printk()ing messages, we append them to a per-test log.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
KUnit assertions and expectations will print the values being tested. If
these are pointers (e.g., KUNIT_EXPECT_PTR_EQ(test, a, b)), these
pointers are currently printed with the %pK format specifier, which -- to
prevent information leaks which may compromise, e.g., ASLR -- are often
either hashed or replaced with ____ptrval____ or similar, making debugging
tests difficult.
By replacing %pK with %px as Documentation/core-api/printk-formats.rst
suggests, we disable this security feature for KUnit assertions and
expectations, allowing the actual pointer values to be printed. Given
that KUnit is not intended for use in production kernels, and the
pointers are only printed on failing tests, this seems like a worthwhile
tradeoff.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Making kunit itself buildable as a module allows for "always-on"
kunit configuration; specifying CONFIG_KUNIT=m means the module
is built but only used when loaded. Kunit test modules will load
kunit.ko as an implicit dependency, so simply running
"modprobe my-kunit-tests" will load the tests along with the kunit
module and run them.
Co-developed-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In discussion of how to handle timeouts, it was noted that if
sysctl_hung_task_timeout_seconds is exceeded for a kunit test,
the test task will be killed and an oops generated. This should
suffice as a means of debugging such timeout issues for now.
Hence remove use of sysctl_hung_task_timeout_secs, which has the
added benefit of avoiding the need to export that symbol from
the core kernel.
Co-developed-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
As tests are added to kunit, it will become less feasible to execute
all built tests together. By supporting modular tests we provide
a simple way to do selective execution on a running system; specifying
CONFIG_KUNIT=y
CONFIG_KUNIT_EXAMPLE_TEST=m
...means we can simply "insmod example-test.ko" to run the tests.
To achieve this we need to do the following:
o export the required symbols in kunit
o string-stream tests utilize non-exported symbols so for now we skip
building them when CONFIG_KUNIT_TEST=m.
o drivers/base/power/qos-test.c contains a few unexported interface
references, namely freq_qos_read_value() and freq_constraints_init().
Both of these could be potentially defined as static inline functions
in include/linux/pm_qos.h, but for now we simply avoid supporting
module build for that test suite.
o support a new way of declaring test suites. Because a module cannot
do multiple late_initcall()s, we provide a kunit_test_suites() macro
to declare multiple suites within the same module at once.
o some test module names would have been too general ("test-test"
and "example-test" for kunit tests, "inode-test" for ext4 tests);
rename these as appropriate ("kunit-test", "kunit-example-test"
and "ext4-inode-test" respectively).
Also define kunit_test_suite() via kunit_test_suites()
as callers in other trees may need the old definition.
Co-developed-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: Theodore Ts'o <tytso@mit.edu> # for ext4 bits
Acked-by: David Gow <davidgow@google.com> # For list-test
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Define function as static inline in try-catch-impl.h to allow it to
be used in kunit itself and tests. Also remove unused
kunit_generic_try_catch
Co-developed-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Previously KUnit assumed that printk would always be present, which is
not a valid assumption to make. Fix that by removing call to
vprintk_emit, and calling printk directly.
This fixes a build error[1] reported by Randy.
For context this change comes after much discussion. My first stab[2] at
this was just to make the KUnit logging code compile out; however, it
was agreed that if we were going to use vprintk_emit, then vprintk_emit
should provide a no-op stub, which lead to my second attempt[3]. In
response to me trying to stub out vprintk_emit, Sergey Senozhatsky
suggested a way for me to remove our usage of vprintk_emit, which led to
my third attempt at solving this[4].
In my third version of this patch[4], I completely removed vprintk_emit,
as suggested by Sergey; however, there was a bit of debate over whether
Sergey's solution was the best. The debate arose due to Sergey's version
resulting in a checkpatch warning, which resulted in a debate over
correct printk usage. Joe Perches offered an alternative fix which was
somewhat less far reaching than what Sergey had suggested and
importantly relied on continuing to use %pV. Much of the debated
centered around whether %pV should be widely used, and whether Sergey's
version would result in object size bloat. Ultimately, we decided to go
with Sergey's version.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Link[1]: https://lore.kernel.org/linux-kselftest/c7229254-0d90-d90e-f3df-5b6d6fc0b51f@infradead.org/
Link[2]: https://lore.kernel.org/linux-kselftest/20190827174932.44177-1-brendanhiggins@google.com/
Link[3]: https://lore.kernel.org/linux-kselftest/20190827234835.234473-1-brendanhiggins@google.com/
Link[4]: https://lore.kernel.org/linux-kselftest/20190828093143.163302-1-brendanhiggins@google.com/
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Tim.Bird@sony.com
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add unit tests for KUnit managed resources. KUnit managed resources
(struct kunit_resource) are resources that are automatically cleaned up
at the end of a KUnit test, similar to the concept of devm_* managed
resources.
Signed-off-by: Avinash Kondareddy <akndr41@gmail.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add support for assertions which are like expectations except the test
terminates if the assertion is not satisfied.
The idea with assertions is that you use them to state all the
preconditions for your test. Logically speaking, these are the premises
of the test case, so if a premise isn't true, there is no point in
continuing the test case because there are no conclusions that can be
drawn without the premises. Whereas, the expectation is the thing you
are trying to prove. It is not used universally in x-unit style test
frameworks, but I really like it as a convention. You could still
express the idea of a premise using the above idiom, but I think
KUNIT_ASSERT_* states the intended idea perfectly.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add KUnit tests for the KUnit test abort mechanism (see preceding
commit). Add tests both for general try catch mechanism as well as
non-architecture specific mechanism.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add support for aborting/bailing out of test cases, which is needed for
implementing assertions.
An assertion is like an expectation, but bails out of the test case
early if the assertion is not met. The idea with assertions is that you
use them to state all the preconditions for your test. Logically
speaking, these are the premises of the test case, so if a premise isn't
true, there is no point in continuing the test case because there are no
conclusions that can be drawn without the premises. Whereas, the
expectation is the thing you are trying to prove.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a test for string stream along with a simpler example.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add support for expectations, which allow properties to be specified and
then verified in tests.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add `struct kunit_assert` and friends which provide a structured way to
capture data from an expectation or an assertion (introduced later in
the series) so that it may be printed out in the event of a failure.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
A number of test features need to do pretty complicated string printing
where it may not be possible to rely on a single preallocated string
with parameters.
So provide a library for constructing the string as you go similar to
C++'s std::string. string_stream is really just a string builder,
nothing more.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Create a common API for test managed resources like memory and test
objects. A lot of times a test will want to set up infrastructure to be
used in test cases; this could be anything from just wanting to allocate
some memory to setting up a driver stack; this defines facilities for
creating "test resources" which are managed by the test infrastructure
and are automatically cleaned up at the conclusion of the test.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add core facilities for defining unit tests; this provides a common way
to define test cases, functions that execute code which is under test
and determine whether the code under test behaves as expected; this also
provides a way to group together related test cases in test suites (here
we call them test_modules).
Just define test cases and how to execute them for now; setting
expectations on code will be defined later.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
