As it is, path_lookupat() and path_mounpoint() might end up leaking struct file
reference in some cases.
Spotted-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
we used to check for "nobody else could start doing anything with
that opened file" by checking that refcount was 2 or less - one
for descriptor table and one we'd acquired in fget() on the way to
wherever we are. That was race-prone (somebody else might have
had a reference to descriptor table and do fget() just as we'd
been checking) and it had become flat-out incorrect back when
we switched to fget_light() on those codepaths - unlike fget(),
it doesn't grab an extra reference unless the descriptor table
is shared. The same change allowed a race-free check, though -
we are safe exactly when refcount is less than 2.
It was a long time ago; pre-2.6.12 for ioctl() (the codepath leading
to ppp one) and 2.6.17 for sendmsg() (netlink one). OTOH,
netlink hadn't grown that check until 3.9 and ppp used to live
in drivers/net, not drivers/net/ppp until 3.1. The bug existed
well before that, though, and the same fix used to apply in old
location of file.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It would make more sense to pass char __user * instead of
char * in callers of do_mount() and do getname() inside do_mount().
Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Seunghun Lee <waydi1@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
hashed dentry can be passed to ->atomic_open() only if
a) it has just passed revalidation and
b) it's negative
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
return dentry, not inode. dev->inode is never used by anything,
don't bother with storing it.
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The only way we can get to that function is from misc_open(), after
the latter has set file->f_op to exactly the same value we are
(re)assigning there.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The gcc version 4.9.1 compiler complains Even though it isn't possible for
these variables to not get initialized before they are used.
fs/namespace.c: In function ‘SyS_mount’:
fs/namespace.c:2720:8: warning: ‘kernel_dev’ may be used uninitialized in this function [-Wmaybe-uninitialized]
ret = do_mount(kernel_dev, kernel_dir->name, kernel_type, flags,
^
fs/namespace.c:2699:8: note: ‘kernel_dev’ was declared here
char *kernel_dev;
^
fs/namespace.c:2720:8: warning: ‘kernel_type’ may be used uninitialized in this function [-Wmaybe-uninitialized]
ret = do_mount(kernel_dev, kernel_dir->name, kernel_type, flags,
^
fs/namespace.c:2697:8: note: ‘kernel_type’ was declared here
char *kernel_type;
^
Fix the warnings by simplifying copy_mount_string() as suggested by Al Viro.
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
That loop in there is both anti-idiomatic *and* completely pointless.
strtoll() is there for purpose; use it and compare what's left with
acceptable suffices.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch makes it possible to kill a process looping in
cont_expand_zero. A process may spend a lot of time in this function, so
it is desirable to be able to kill it.
It happened to me that I wanted to copy a piece data from the disk to a
file. By mistake, I used the "seek" parameter to dd instead of "skip". Due
to the "seek" parameter, dd attempted to extend the file and became stuck
doing so - the only possibility was to reset the machine or wait many
hours until the filesystem runs out of space and cont_expand_zero fails.
We need this patch to be able to terminate the process.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
For DAX, we want to be able to copy between iovecs and kernel addresses
that don't necessarily have a struct page. This is a fairly simple
rearrangement for bvec iters to kmap the pages outside and pass them in,
but for user iovecs it gets more complicated because we might try various
different ways to kmap the memory. Duplicating the existing logic works
out best in this case.
We need to be able to write zeroes to an iovec for reads from unwritten
ranges in a file. This is performed by the new iov_iter_zero() function,
again patterned after the existing code that handles iovec iterators.
[AV: and export the buggers...]
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
total_objects could be 0 and is used as a denom.
While total_objects is a "long", total_objects == 0 unlikely happens for
3.12 and later kernels because 32-bit architectures would not be able to
hold (1 << 32) objects. However, total_objects == 0 may happen for kernels
between 3.1 and 3.11 because total_objects in prune_super() was an "int"
and (e.g.) x86_64 architecture might be able to hold (1 << 32) objects.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable <stable@kernel.org> # 3.1+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
schedule_delayed_work() happening when the work is already pending is
a cheap no-op. Don't bother with ->wbuf_queued logics - it's both
broken (cancelling ->wbuf_dwork leaves it set, as spotted by Jeff Harris)
and pointless. It's cheaper to let schedule_delayed_work() handle that
case.
Reported-by: Jeff Harris <jefftharris@gmail.com>
Tested-by: Jeff Harris <jefftharris@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The function which calls s_op->alloc_inode() is not inode_alloc(), but
instead alloc_inode() which lives in fs/inode.c .
The typo was there from the beginning from 5ea626aa (VFS: update
documentation, 2005) - there was no standalone inode_alloc() for the
whole kernel history.
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... rather than doing that in the guts of ->load_binary().
[updated to fix the bug spotted by Shentino - for SIGSEGV we really need
something stronger than send_sig_info(); again, better do that in one place]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
the only in-tree instance checks d_unhashed() anyway,
out-of-tree code can preserve the current behaviour by
adding such check if they want it and we get an ability
to use it in cases where we *want* to be notified of
killing being inevitable before ->d_lock is dropped,
whether it's unhashed or not. In particular, autofs
would benefit from that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The only reason for games with ->d_prune() was __d_drop(), which
was needed only to force dput() into killing the sucker off.
Note that lock_parent() can be called under ->i_lock and won't
drop it, so dentry is safe from somebody managing to kill it
under us - it won't happen while we are holding ->i_lock.
__dentry_kill() is called only with ->d_lockref.count being 0
(here and when picked from shrink list) or 1 (dput() and dropping
the ancestors in shrink_dentry_list()), so it will never be called
twice - the first thing it's doing is making ->d_lockref.count
negative and once that happens, nothing will increment it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now that d_invalidate always succeeds and flushes mount points use
it in stead of a combination of shrink_dcache_parent and d_drop
in proc_flush_task_mnt. This removes the danger of a mount point
under /proc/<pid>/... becoming unreachable after the d_drop.
Reviewed-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now that d_invalidate always succeeds it is not longer necessary or
desirable to hard code d_drop calls into filesystem specific
d_revalidate implementations.
Remove the unnecessary d_drop calls and rely on d_invalidate
to drop the dentries. Using d_invalidate ensures that paths
to mount points will not be dropped.
Reviewed-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now that d_invalidate can no longer fail, stop returning a useless
return code. For the few callers that checked the return code update
remove the handling of d_invalidate failure.
Reviewed-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now that d_invalidate is the only caller of check_submounts_and_drop,
expand check_submounts_and_drop inline in d_invalidate.
Reviewed-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now that check_submounts_and_drop can not fail and is called from
d_invalidate there is no longer a need to call check_submounts_and_drom
from filesystem d_revalidate methods so remove it.
Reviewed-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
With the introduction of mount namespaces and bind mounts it became
possible to access files and directories that on some paths are mount
points but are not mount points on other paths. It is very confusing
when rm -rf somedir returns -EBUSY simply because somedir is mounted
somewhere else. With the addition of user namespaces allowing
unprivileged mounts this condition has gone from annoying to allowing
a DOS attack on other users in the system.
The possibility for mischief is removed by updating the vfs to support
rename, unlink and rmdir on a dentry that is a mountpoint and by
lazily unmounting mountpoints on deleted dentries.
In particular this change allows rename, unlink and rmdir system calls
on a dentry without a mountpoint in the current mount namespace to
succeed, and it allows rename, unlink, and rmdir performed on a
distributed filesystem to update the vfs cache even if when there is a
mount in some namespace on the original dentry.
There are two common patterns of maintaining mounts: Mounts on trusted
paths with the parent directory of the mount point and all ancestory
directories up to / owned by root and modifiable only by root
(i.e. /media/xxx, /dev, /dev/pts, /proc, /sys, /sys/fs/cgroup/{cpu,
cpuacct, ...}, /usr, /usr/local). Mounts on unprivileged directories
maintained by fusermount.
In the case of mounts in trusted directories owned by root and
modifiable only by root the current parent directory permissions are
sufficient to ensure a mount point on a trusted path is not removed
or renamed by anyone other than root, even if there is a context
where the there are no mount points to prevent this.
In the case of mounts in directories owned by less privileged users
races with users modifying the path of a mount point are already a
danger. fusermount already uses a combination of chdir,
/proc/<pid>/fd/NNN, and UMOUNT_NOFOLLOW to prevent these races. The
removable of global rename, unlink, and rmdir protection really adds
nothing new to consider only a widening of the attack window, and
fusermount is already safe against unprivileged users modifying the
directory simultaneously.
In principle for perfect userspace programs returning -EBUSY for
unlink, rmdir, and rename of dentires that have mounts in the local
namespace is actually unnecessary. Unfortunately not all userspace
programs are perfect so retaining -EBUSY for unlink, rmdir and rename
of dentries that have mounts in the current mount namespace plays an
important role of maintaining consistency with historical behavior and
making imperfect userspace applications hard to exploit.
v2: Remove spurious old_dentry.
v3: Optimized shrink_submounts_and_drop
Removed unsued afs label
v4: Simplified the changes to check_submounts_and_drop
Do not rename check_submounts_and_drop shrink_submounts_and_drop
Document what why we need atomicity in check_submounts_and_drop
Rely on the parent inode mutex to make d_revalidate and d_invalidate
an atomic unit.
v5: Refcount the mountpoint to detach in case of simultaneous
renames.
Reviewed-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The new function detach_mounts comes in two pieces. The first piece
is a static inline test of d_mounpoint that returns immediately
without taking any locks if d_mounpoint is not set. In the common
case when mountpoints are absent this allows the vfs to continue
running with it's same cacheline foot print.
The second piece of detach_mounts __detach_mounts actually does the
work and it assumes that a mountpoint is present so it is slow and
takes namespace_sem for write, and then locks the mount hash (aka
mount_lock) after a struct mountpoint has been found.
With those two locks held each entry on the list of mounts on a
mountpoint is selected and lazily unmounted until all of the mount
have been lazily unmounted.
v7: Wrote a proper change description and removed the changelog
documenting deleted wrong turns.
Signed-off-by: Eric W. Biederman <ebiederman@twitter.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
I am shortly going to add a new user of struct mountpoint that
needs to look up existing entries but does not want to create
a struct mountpoint if one does not exist. Therefore to keep
the code simple and easy to read split out lookup_mountpoint
from new_mountpoint.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
To spot any possible problems call BUG if a mountpoint
is put when it's list of mounts is not empty.
AV: use hlist instead of list_head
Reviewed-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Eric W. Biederman <ebiederman@twitter.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In preparation for allowing mountpoints to be renamed and unlinked
in remote filesystems and in other mount namespaces test if on a dentry
there is a mount in the local mount namespace before allowing it to
be renamed or unlinked.
The primary motivation here are old versions of fusermount unmount
which is not safe if the a path can be renamed or unlinked while it is
verifying the mount is safe to unmount. More recent versions are simpler
and safer by simply using UMOUNT_NOFOLLOW when unmounting a mount
in a directory owned by an arbitrary user.
Miklos Szeredi <miklos@szeredi.hu> reports this is approach is good
enough to remove concerns about new kernels mixed with old versions
of fusermount.
A secondary motivation for restrictions here is that it removing empty
directories that have non-empty mount points on them appears to
violate the rule that rmdir can not remove empty directories. As
Linus Torvalds pointed out this is useful for programs (like git) that
test if a directory is empty with rmdir.
Therefore this patch arranges to enforce the existing mount point
semantics for local mount namespace.
v2: Rewrote the test to be a drop in replacement for d_mountpoint
v3: Use bool instead of int as the return type of is_local_mountpoint
Reviewed-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The current comments in d_invalidate about what and why it is doing
what it is doing are wildly off-base. Which is not surprising as
the comments date back to last minute bug fix of the 2.2 kernel.
The big fat lie of a comment said: If it's a directory, we can't drop
it for fear of somebody re-populating it with children (even though
dropping it would make it unreachable from that root, we still might
repopulate it if it was a working directory or similar).
[AV] What we really need to avoid is multiple dentry aliases of the
same directory inode; on all filesystems that have ->d_revalidate()
we either declare all positive dentries always valid (and thus never
fed to d_invalidate()) or use d_materialise_unique() and/or d_splice_alias(),
which take care of alias prevention.
The current rules are:
- To prevent mount point leaks dentries that are mount points or that
have childrent that are mount points may not be be unhashed.
- All dentries may be unhashed.
- Directories may be rehashed with d_materialise_unique
check_submounts_and_drop implements this already for well maintained
remote filesystems so implement the current rules in d_invalidate
by just calling check_submounts_and_drop.
The one difference between d_invalidate and check_submounts_and_drop
is that d_invalidate must respect it when a d_revalidate method has
earlier called d_drop so preserve the d_unhashed check in
d_invalidate.
Reviewed-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
