Pull perf fixes from Ingo Molnar:
"A bit larger than what I'd wish for - half of it is due to hw driver
updates to Intel Ivy-Bridge which info got recently released,
cycles:pp should work there now too, amongst other things. (but we
are generally making exceptions for hardware enablement of this type.)
There are also callchain fixes in it - responding to mostly
theoretical (but valid) concerns. The tooling side sports perf.data
endianness/portability fixes which did not make it for the merge
window - and various other fixes as well."
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
perf/x86: Check user address explicitly in copy_from_user_nmi()
perf/x86: Check if user fp is valid
perf: Limit callchains to 127
perf/x86: Allow multiple stacks
perf/x86: Update SNB PEBS constraints
perf/x86: Enable/Add IvyBridge hardware support
perf/x86: Implement cycles:p for SNB/IVB
perf/x86: Fix Intel shared extra MSR allocation
x86/decoder: Fix bsr/bsf/jmpe decoding with operand-size prefix
perf: Remove duplicate invocation on perf_event_for_each
perf uprobes: Remove unnecessary check before strlist__delete
perf symbols: Check for valid dso before creating map
perf evsel: Fix 32 bit values endianity swap for sample_id_all header
perf session: Handle endianity swap on sample_id_all header data
perf symbols: Handle different endians properly during symbol load
perf evlist: Pass third argument to ioctl explicitly
perf tools: Update ioctl documentation for PERF_IOC_FLAG_GROUP
perf tools: Make --version show kernel version instead of pull req tag
perf tools: Check if callchain is corrupted
perf callchain: Make callchain cursors TLS
...
Pull perf fixes from Arnaldo Carvalho de Melo:
* Endianness fixes from Jiri Olsa
* Fixes for make perf tarball
* Fix for DSO name in perf script callchains, from David Ahern
* Segfault fixes for perf top --callchain, from Namhyung Kim
* Minor function result fixes from Srikar Dronamraju
* Add missing 3rd ioctl parameter, from Namhyung Kim
* Fix pager usage in minimal embedded systems, from Avik Sil
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Initial IVB support went into turbostat in Linux-3.1:
553575f1ae
(tools turbostat: recognize and run properly on IVB)
However, when running on IVB, turbostat would fail
to report the new couters added with SNB, c7, pc2 and pc7.
So in scenarios where these counters are non-zero on IVB,
turbostat would report erroneous residencey results.
In particular c7 time would be added to c1 time,
since c1 time is calculated as "that which is left over".
Also, turbostat reports MHz capabilities when passed
the "-v" option, and it would incorrectly report 133MHz
bclk instead of 100MHz bclk for IVB, which would inflate
GHz reported with that option.
This patch is a backport of a fix already included in turbostat v2.
Signed-off-by: Len Brown <len.brown@intel.com>
Linux 3.4 included a modification to turbostat to
lower cross-call overhead by using scheduler affinity:
15aaa34654
(tools turbostat: reduce measurement overhead due to IPIs)
In the use-case where turbostat forks a child program,
that change had the un-intended side-effect of binding
the child to the last cpu in the system.
This change removed the binding before forking the child.
This is a back-port of a fix already included in turbostat v2.
Signed-off-by: Len Brown <len.brown@intel.com>
Merge misc patches from Andrew Morton:
- the "misc" tree - stuff from all over the map
- checkpatch updates
- fatfs
- kmod changes
- procfs
- cpumask
- UML
- kexec
- mqueue
- rapidio
- pidns
- some checkpoint-restore feature work. Reluctantly. Most of it
delayed a release. I'm still rather worried that we don't have a
clear roadmap to completion for this work.
* emailed from Andrew Morton <akpm@linux-foundation.org>: (78 patches)
kconfig: update compression algorithm info
c/r: prctl: add ability to set new mm_struct::exe_file
c/r: prctl: extend PR_SET_MM to set up more mm_struct entries
c/r: procfs: add arg_start/end, env_start/end and exit_code members to /proc/$pid/stat
syscalls, x86: add __NR_kcmp syscall
fs, proc: introduce /proc/<pid>/task/<tid>/children entry
sysctl: make kernel.ns_last_pid control dependent on CHECKPOINT_RESTORE
aio/vfs: cleanup of rw_copy_check_uvector() and compat_rw_copy_check_uvector()
eventfd: change int to __u64 in eventfd_signal()
fs/nls: add Apple NLS
pidns: make killed children autoreap
pidns: use task_active_pid_ns in do_notify_parent
rapidio/tsi721: add DMA engine support
rapidio: add DMA engine support for RIO data transfers
ipc/mqueue: add rbtree node caching support
tools/selftests: add mq_perf_tests
ipc/mqueue: strengthen checks on mqueue creation
ipc/mqueue: correct mq_attr_ok test
ipc/mqueue: improve performance of send/recv
selftests: add mq_open_tests
...
While doing the checkpoint-restore in the user space one need to determine
whether various kernel objects (like mm_struct-s of file_struct-s) are
shared between tasks and restore this state.
The 2nd step can be solved by using appropriate CLONE_ flags and the
unshare syscall, while there's currently no ways for solving the 1st one.
One of the ways for checking whether two tasks share e.g. mm_struct is to
provide some mm_struct ID of a task to its proc file, but showing such
info considered to be not that good for security reasons.
Thus after some debates we end up in conclusion that using that named
'comparison' syscall might be the best candidate. So here is it --
__NR_kcmp.
It takes up to 5 arguments - the pids of the two tasks (which
characteristics should be compared), the comparison type and (in case of
comparison of files) two file descriptors.
Lookups for pids are done in the caller's PID namespace only.
At moment only x86 is supported and tested.
[akpm@linux-foundation.org: fix up selftests, warnings]
[akpm@linux-foundation.org: include errno.h]
[akpm@linux-foundation.org: tweak comment text]
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Valdis.Kletnieks@vt.edu
Cc: Michal Marek <mmarek@suse.cz>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add the mq_perf_tests tool I used when creating my mq performance patch.
Also add a local .gitignore to keep the binaries from showing up in git
status output.
[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Doug Ledford <dledford@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a directory to house POSIX message queue subsystem specific tests.
Add first test which checks the operation of mq_open() under various
corner conditions.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Joe Korty <joe.korty@ccur.com>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We swap the sample_id_all header by u64 pointers. Some members of the
header happen to be 32 bit values. We need to handle them separatelly.
Together with other endianity patches, this change fixies perf report
discrepancies on origin and target systems as described in test 1 below,
e.g. following perf report diff:
...
0.12% ps [kernel.kallsyms] [k] clear_page
- 0.12% awk bash [.] alloc_word_desc
+ 0.12% awk bash [.] yyparse
0.11% beah-rhts-task libpython2.6.so.1.0 [.] 0x5560e
0.10% perf libc-2.12.so [.] __ctype_toupper_loc
- 0.09% rhts-test-runne bash [.] maybe_make_export_env
+ 0.09% rhts-test-runne bash [.] 0x385a0
0.09% ps [kernel.kallsyms] [k] page_fault
...
Note, running following to test perf endianity handling:
test 1)
- origin system:
# perf record -a -- sleep 10 (any perf record will do)
# perf report > report.origin
# perf archive perf.data
- copy the perf.data, report.origin and perf.data.tar.bz2
to a target system and run:
# tar xjvf perf.data.tar.bz2 -C ~/.debug
# perf report > report.target
# diff -u report.origin report.target
- the diff should produce no output
(besides some white space stuff and possibly different
date/TZ output)
test 2)
- origin system:
# perf record -ag -fo /tmp/perf.data -- sleep 1
- mount origin system root to the target system on /mnt/origin
- target system:
# perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \
--kallsyms /mnt/origin/proc/kallsyms
- complete perf.data header is displayed
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338380624-7443-4-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding endianity swapping for event header attached via sample_id_all.
Currently we dont do that and it's causing wrong data to be read when
running report on architecture with different endianity than the record.
The perf is currently able to process 32-bit PPC samples on 32-bit
and 64-bit x86.
Together with other endianity patches, this change fixies perf report
discrepancies on origin and target systems as described in test 1
below, e.g. following perf report diff:
...
0.12% ps [kernel.kallsyms] [k] clear_page
- 0.12% awk bash [.] alloc_word_desc
+ 0.12% awk bash [.] yyparse
0.11% beah-rhts-task libpython2.6.so.1.0 [.] 0x5560e
0.10% perf libc-2.12.so [.] __ctype_toupper_loc
- 0.09% rhts-test-runne bash [.] maybe_make_export_env
+ 0.09% rhts-test-runne bash [.] 0x385a0
0.09% ps [kernel.kallsyms] [k] page_fault
...
Note, running following to test perf endianity handling:
test 1)
- origin system:
# perf record -a -- sleep 10 (any perf record will do)
# perf report > report.origin
# perf archive perf.data
- copy the perf.data, report.origin and perf.data.tar.bz2
to a target system and run:
# tar xjvf perf.data.tar.bz2 -C ~/.debug
# perf report > report.target
# diff -u report.origin report.target
- the diff should produce no output
(besides some white space stuff and possibly different
date/TZ output)
test 2)
- origin system:
# perf record -ag -fo /tmp/perf.data -- sleep 1
- mount origin system root to the target system on /mnt/origin
- target system:
# perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \
--kallsyms /mnt/origin/proc/kallsyms
- complete perf.data header is displayed
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338380624-7443-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we dont care about the file object's endianness. It's possible
we read buildid file object from different architecture than we are
currentlly running on. So we need to care about properly reading such
object's data - handle different endianness properly.
Adding:
needs_swap DSO field
dso__swap_init function to initialize DSO's needs_swap
DSO__SWAP to read the data with proper swaps
Together with other endianity patches, this change fixies perf report
discrepancies on origin and target systems as described in test 1 below,
e.g. following perf report diff:
...
0.12% ps [kernel.kallsyms] [k] clear_page
- 0.12% awk bash [.] alloc_word_desc
+ 0.12% awk bash [.] yyparse
0.11% beah-rhts-task libpython2.6.so.1.0 [.] 0x5560e
0.10% perf libc-2.12.so [.] __ctype_toupper_loc
- 0.09% rhts-test-runne bash [.] maybe_make_export_env
+ 0.09% rhts-test-runne bash [.] 0x385a0
0.09% ps [kernel.kallsyms] [k] page_fault
...
Note, running following to test perf endianity handling:
test 1)
- origin system:
# perf record -a -- sleep 10 (any perf record will do)
# perf report > report.origin
# perf archive perf.data
- copy the perf.data, report.origin and perf.data.tar.bz2
to a target system and run:
# tar xjvf perf.data.tar.bz2 -C ~/.debug
# perf report > report.target
# diff -u report.origin report.target
- the diff should produce no output
(besides some white space stuff and possibly different
date/TZ output)
test 1)
- origin system:
# perf record -ag -fo /tmp/perf.data -- sleep 1
- mount origin system root to the target system on /mnt/origin
- target system:
# perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \
--kallsyms /mnt/origin/proc/kallsyms
- complete perf.data header is displayed
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338380624-7443-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ioctl on perf event fd wants 3 arguments but we only passed 2. As
the only user of the functions is perf record and it calls them for
every event (regardless of group setting), just pass 0 for now.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338443506-25009-3-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ioctl interface of perf event fd receives 3 arguments to control
event group behavior but it lacked documentation.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338443506-25009-2-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We faced segmentation fault on perf top -G at very high sampling rate
due to a corrupted callchain. While the root cause was not revealed (I
failed to figure it out), this patch tries to protect us from the
segfault on such cases.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sunjin Yang <fan4326@gmail.com>
Link: http://lkml.kernel.org/r/1338443007-24857-2-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf top -G has a race on callchain cursor between main thread and
display thread. Since the callchain cursors are used locally make them
thread-local data would solve the problem.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reported-by: Sunjin Yang <fan4326@gmail.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sunjin Yang <fan4326@gmail.com>
Link: http://lkml.kernel.org/r/1338443007-24857-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf updates from Ingo Molnar.
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
perf ui browser: Stop using 'self'
perf annotate browser: Read perf config file for settings
perf config: Allow '_' in config file variable names
perf annotate browser: Make feature toggles global
perf annotate browser: The idx_asm field should be used in asm only view
perf tools: Convert critical messages to ui__error()
perf ui: Make --stdio default when TUI is not supported
tools lib traceevent: Silence compiler warning on 32bit build
perf record: Fix branch_stack type in perf_record_opts
perf tools: Reconstruct event with modifiers from perf_event_attr
perf top: Fix counter name fixup when fallbacking to cpu-clock
perf tools: fix thread_map__new_by_pid_str() memory leak in error path
perf tools: Do not use _FORTIFY_SOURCE when DEBUG=1 is specified
tools lib traceevent: Fix signature of create_arg_item()
tools lib traceevent: Use proper function parameter type
tools lib traceevent: Fix freeing arg on process_dynamic_array()
tools lib traceevent: Fix a possibly wrong memory dereference
tools lib traceevent: Fix a possible memory leak
tools lib traceevent: Allow expressions in __print_symbolic() fields
perf evlist: Explicititely initialize input_name
...
Some Distributions may lack "less" package being included by default,
e.g., Linaro nano rootfs. In those cases use the portable "pager"
command instead of "less".
Signed-off-by: Avik Sil <avik.sil@linaro.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338287725-26382-1-git-send-email-avik.sil@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The patch series that introduced the top level tools/ makefile and the
libtraceevent broke this feature where files needed to build in a
detached tarball were not included in the MANIFEST file and thus not
included in the tarball.
Fix it by adding the relevant files to the MANIFEST.
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-z3mjj74927xvqwhlmu18kj80@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
$ perf script -i /tmp/perf.data
...
gcc 13623 544315.062858: context-switches:
ffffffff815f65c9 __schedule ([kernel.kallsyms])
ffffffff81087cea __cond_resched ([kernel.kallsyms])
ffffffff815f6b92 _cond_resched ([kernel.kallsyms])
ffffffff815fb87a do_page_fault ([kernel.kallsyms])
ffffffff815f8465 page_fault ([kernel.kallsyms])
2b7a71ea0303 _dl_lookup_symbol_x ([kernel.kallsyms])
2b7a71ea1eb5 _dl_relocate_object ([kernel.kallsyms])
2b7a71e99b2e dl_main ([kernel.kallsyms])
2b7a71eab7f4 _dl_sysdep_start ([kernel.kallsyms])
All DSO's in a callchain are printed as [kernel.kallsyms].
git bisect chased it to:
547a92e0ae is the first bad commit
commit 547a92e0ae
Author: Akihiro Nagai <akihiro.nagai.hw@hitachi.com>
Date: Mon Jan 30 13:42:57 2012 +0900
perf script: Unify the expressions indicating "unknown"
The perf script command uses various expressions to indicate "unknown".
It is unfriendly for user scripts to parse it. So, this patch unifies
the expressions to "[unknown]".
Looks like a copy-paste in that the other references use al.map but this one
should be node->map.
With this patch you get:
$ perf script -i /tmp/perf.data
...
gcc 13623 544315.062858: context-switches:
ffffffff815f65c9 __schedule ([kernel.kallsyms])
ffffffff81087cea __cond_resched ([kernel.kallsyms])
ffffffff815f6b92 _cond_resched ([kernel.kallsyms])
ffffffff815fb87a do_page_fault ([kernel.kallsyms])
ffffffff815f8465 page_fault ([kernel.kallsyms])
2b7a71ea0303 _dl_lookup_symbol_x (/lib64/ld-2.14.90.so)
2b7a71ea1eb5 _dl_relocate_object (/lib64/ld-2.14.90.so)
2b7a71e99b2e dl_main (/lib64/ld-2.14.90.so)
2b7a71eab7f4 _dl_sysdep_start (/lib64/ld-2.14.90.so)
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Akihiro Nagai <akihiro.nagai.hw@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1338353906-60706-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When no event is specified the tools use perf_evlist__add_default(), that will
call event_attr_init to initialize the KVM exclusion bits.
When the change was made to the tools so that by default guest samples would be
excluded, the changes were made just to the parsing routines and to
perf_evlist__add_default(), not to perf_evlist__add_attrs, that is used so far
just by perf stat to add multiple events, according to the level of detail
specified.
Recently the tools were changed to reconstruct the event name from all the
details in perf_event_attr, not just from .type and .config, but taking into
account all the feature bits (.exclude_{guest,host,user,kernel,etc},
.precise_ip, etc).
That is when we noticed that the default for perf stat wasn't the one for the
rest of the tools, i.e. the .exclude_guest bit wasn't being set.
I.e. the default, that doesn't call event_attr_init was showing the :HG
modifier:
$ perf stat usleep 1
Performance counter stats for 'usleep 1':
0.942119 task-clock # 0.454 CPUs utilized
1 context-switches # 0.001 M/sec
0 CPU-migrations # 0.000 K/sec
126 page-faults # 0.134 M/sec
693,193 cycles:HG # 0.736 GHz [40.11%]
407,461 stalled-cycles-frontend:HG # 58.78% frontend cycles idle [72.29%]
365,403 stalled-cycles-backend:HG # 52.71% backend cycles idle
465,982 instructions:HG # 0.67 insns per cycle
# 0.87 stalled cycles per insn
89,760 branches:HG # 95.275 M/sec
6,178 branch-misses:HG # 6.88% of all branches
0.002077228 seconds time elapsed
While if one explicitely specifies the same events, which will make the parsing code
to be called and thus event_attr_init is called:
$ perf stat -e task-clock,context-switches,migrations,page-faults,cycles,stalled-cycles-frontend,stalled-cycles-backend,instructions,branches,branch-misses usleep 1
Performance counter stats for 'usleep 1':
1.040349 task-clock # 0.500 CPUs utilized
2 context-switches # 0.002 M/sec
0 CPU-migrations # 0.000 K/sec
127 page-faults # 0.122 M/sec
587,966 cycles # 0.565 GHz [13.18%]
459,167 stalled-cycles-frontend # 78.09% frontend cycles idle
390,249 stalled-cycles-backend # 66.37% backend cycles idle
504,006 instructions # 0.86 insns per cycle
# 0.91 stalled cycles per insn
96,455 branches # 92.714 M/sec
6,522 branch-misses # 6.76% of all branches [96.12%]
0.002078681 seconds time elapsed
Fix it by introducing a perf_evlist__add_default_attrs method that will call
evlist_attr_init in all the perf_event_attr entries before adding the events.
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4eysr236r0pgiyum9epwxw7s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Its 'H', not 'h'. The later is for getting to the help window.
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-7zvwphhm815y2zczoxgstzuf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In non symbolic views, i.e. --sort without "symbol", as in:
perf report --sort comm
We're segfaulting in the --tui because we're testing the symbol resolved
and then trying to use the symbol on the histogram entry where we're
coalescing all hits for a COMM, and the first hist_entry for a comm may
have a NULL symbol, i.e. the RIP didn't resolve to any symbol.
In this case we're segfaulting, fix it by testing against the symbol in
the histogram entry.
Reported-by: William Cohen <wcohen@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8ylwubbcmu27ucc9ffrku3yv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge back Linus's latest branch so that we pick up the uprobes changes.
( I tested this branch locally and while it's one from the middle of the
merge window it's a good one to base further work off. )
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Stop using this python/OOP convention, doesn't really helps. Will do
more from time to time till we get it cleaned up in all of /perf.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5dyxyb8o0gf4yndk27kafbd1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For annotate I want to be able to have variables that are the same as
the ones representing feature toggles.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-7rhhf6m0a72p2wja4tgv1itg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that when navigating to another function from a call site or when
going to another annotation browser thru the main report/top browser the
options (hide source code, jump arrows, jumpy lines, etc) remains the
last ones selected.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0h0tah1zj59p01581snjufne@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When hide_src_view is true we can't use browser_disasm_line->idx, that
takes into account also non asm lines, we must use browser_disasm_line->idx_asm
instead, otherwise we may end up with an index after the number of
entries, oops, fix it.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-o1szpyjh3z87yi0n6x0cr8uu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Compiling page-type.c with a recent compiler produces many warnings,
mostly related to signed/unsigned comparisons. This patch cleans up most
of them.
One remaining warning is about an unused parameter. The <compiler.h> file
doesn't define a __unused macro (or the like) yet. This can be addressed
later.
Signed-off-by: Ulrich Drepper <drepper@gmail.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Programs using /proc/kpageflags need to know about the various flags. The
<linux/kernel-page-flags.h> provides them and the comments in the file
indicate that it is supposed to be used by user-level code. But the file
is not installed.
Install the headers and mark the unstable flags as out-of-bounds. The
page-type tool is also adjusted to not duplicate the definitions
Signed-off-by: Ulrich Drepper <drepper@gmail.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There were places where use ui__warning (or even fprintf) to show
critical messages. This patch converts them to ui__error so that the
front-end code can implement appropriate behavior.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338265382-6872-3-git-send-email-namhyung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit dc41b9b8f0 ("perf ui: Change fallback policy of
setup_browser") changed default behavior of the function but missed
setting the use_browser variable to 0 accidently. So perf report ends up
doing nothing in such cases. Fix it.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1338216802-5675-1-git-send-email-namhyung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The gcc complains about casting a pointer to unsigned long long directly:
SUBDIR ../lib/traceevent/
CC FPIC event-parse.o
CC FPIC trace-seq.o
CC FPIC parse-filter.o
/home/namhyung/project/linux/tools/lib/traceevent/parse-filter.c: In function ‘get_value’:
/home/namhyung/project/linux/tools/lib/traceevent/parse-filter.c:1588: warning: cast from pointer to integer of different size
CC FPIC parse-utils.o
BUILD STATIC LIB libtraceevent.a
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1338003691-3141-1-git-send-email-namhyung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The attr.branch_sample_type field is defined as u64 by the API. As
such, we need to ensure the variable holding the value of the branch
stack filters is also u64 otherwise we may lose bits in the future.
Note also that the bogus definition of the field in perf_record_opts
caused problems on big-endian PPC systems. Thanks to Anshuman Khandual
for tracking the problem on PPC.
Reported-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120525211344.GA7729@quad
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The modifiers:
k kernel space
u user space
h hypervisor
G guest
H host
p, pp, ppp precision level (PEBS)
that can be suffixed to an event were lost when tools used event_name()
to reconstruct them from the perf_event_attr entries in a perf.data
file.
Fix it by following the defaults used for these modifiers in the current
codebase, so:
$ perf record -e instructions:u usleep 1 2> /dev/null
$ perf evlist
instructions:u
$ perf record -e cycles:k usleep 1 2> /dev/null
$ perf evlist
cycles:k
$ perf record -e cycles:kh usleep 1 2> /dev/null
$ perf evlist
cycles:kh
$ perf record -e cache-misses:G usleep 1 2> /dev/null
$ perf evlist
cache-misses:G
$ perf record -e cycles:ppk usleep 1 2> /dev/null
$ perf evlist
cycles:kpp
$
Also works with 'top', 'report', etc.
More work needed to cover tracepoints and software events while not
dragging lots of baggage to the python binding, this is a minimal fix
for v3.5.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4hl5glle0hxlklw4usva1mkt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In 40491eaa "perf top: Update event name when falling back to cpu-clock"
we freed counter->name but didn't reset it to NULL, then when setting it
to the result of event_name(), event_name() would use the cached value,
which by now was overwritten and thus we got garbage or a zero lenght
string.
Fix it by just freeing and setting counter->name to NULL, this way
event_name() when called afterwards, will find the right counter name
and cache it again.
Found while trying 'cycles:pp' on a machine were :pp couldn't be
honoured. Probably the best fallback here is to tell the user that that
level of precision is not available on the PMU and then go removing 'p',
levels of precision till we get to play 'cycles' and if even that fails,
_then_ get to 'cpu-clock'.
But that is the matter for another patch, this one just needs to fix the
caching issue, which in the end will show 'cpu-clock' when tools ask for
the event name being used, which clarifies things for the user, that
will see that 'cycles:pp' or whatever not support event is not being
used, some sort of fallback happened.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-w1neie2dqli89we1bzwkf4id@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The namelist array (including its content) was not freed if we fail to
realloc a new 'threads' structure.
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1337952109-31995-1-git-send-email-fbuihuu@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull user-space probe instrumentation from Ingo Molnar:
"The uprobes code originates from SystemTap and has been used for years
in Fedora and RHEL kernels. This version is much rewritten, reviews
from PeterZ, Oleg and myself shaped the end result.
This tree includes uprobes support in 'perf probe' - but SystemTap
(and other tools) can take advantage of user probe points as well.
Sample usage of uprobes via perf, for example to profile malloc()
calls without modifying user-space binaries.
First boot a new kernel with CONFIG_UPROBE_EVENT=y enabled.
If you don't know which function you want to probe you can pick one
from 'perf top' or can get a list all functions that can be probed
within libc (binaries can be specified as well):
$ perf probe -F -x /lib/libc.so.6
To probe libc's malloc():
$ perf probe -x /lib64/libc.so.6 malloc
Added new event:
probe_libc:malloc (on 0x7eac0)
You can now use it in all perf tools, such as:
perf record -e probe_libc:malloc -aR sleep 1
Make use of it to create a call graph (as the flat profile is going to
look very boring):
$ perf record -e probe_libc:malloc -gR make
[ perf record: Woken up 173 times to write data ]
[ perf record: Captured and wrote 44.190 MB perf.data (~1930712
$ perf report | less
32.03% git libc-2.15.so [.] malloc
|
--- malloc
29.49% cc1 libc-2.15.so [.] malloc
|
--- malloc
|
|--0.95%-- 0x208eb1000000000
|
|--0.63%-- htab_traverse_noresize
11.04% as libc-2.15.so [.] malloc
|
--- malloc
|
7.15% ld libc-2.15.so [.] malloc
|
--- malloc
|
5.07% sh libc-2.15.so [.] malloc
|
--- malloc
|
4.99% python-config libc-2.15.so [.] malloc
|
--- malloc
|
4.54% make libc-2.15.so [.] malloc
|
--- malloc
|
|--7.34%-- glob
| |
| |--93.18%-- 0x41588f
| |
| --6.82%-- glob
| 0x41588f
...
Or:
$ perf report -g flat | less
# Overhead Command Shared Object Symbol
# ........ ............. ............. ..........
#
32.03% git libc-2.15.so [.] malloc
27.19%
malloc
29.49% cc1 libc-2.15.so [.] malloc
24.77%
malloc
11.04% as libc-2.15.so [.] malloc
11.02%
malloc
7.15% ld libc-2.15.so [.] malloc
6.57%
malloc
...
The core uprobes design is fairly straightforward: uprobes probe
points register themselves at (inode:offset) addresses of
libraries/binaries, after which all existing (or new) vmas that map
that address will have a software breakpoint injected at that address.
vmas are COW-ed to preserve original content. The probe points are
kept in an rbtree.
If user-space executes the probed inode:offset instruction address
then an event is generated which can be recovered from the regular
perf event channels and mmap-ed ring-buffer.
Multiple probes at the same address are supported, they create a
dynamic callback list of event consumers.
The basic model is further complicated by the XOL speedup: the
original instruction that is probed is copied (in an architecture
specific fashion) and executed out of line when the probe triggers.
The XOL area is a single vma per process, with a fixed number of
entries (which limits probe execution parallelism).
The API: uprobes are installed/removed via
/sys/kernel/debug/tracing/uprobe_events, the API is integrated to
align with the kprobes interface as much as possible, but is separate
to it.
Injecting a probe point is privileged operation, which can be relaxed
by setting perf_paranoid to -1.
You can use multiple probes as well and mix them with kprobes and
regular PMU events or tracepoints, when instrumenting a task."
Fix up trivial conflicts in mm/memory.c due to previous cleanup of
unmap_single_vma().
* 'perf-uprobes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
perf probe: Detect probe target when m/x options are absent
perf probe: Provide perf interface for uprobes
tracing: Fix kconfig warning due to a typo
tracing: Provide trace events interface for uprobes
tracing: Extract out common code for kprobes/uprobes trace events
tracing: Modify is_delete, is_return from int to bool
uprobes/core: Decrement uprobe count before the pages are unmapped
uprobes/core: Make background page replacement logic account for rss_stat counters
uprobes/core: Optimize probe hits with the help of a counter
uprobes/core: Allocate XOL slots for uprobes use
uprobes/core: Handle breakpoint and singlestep exceptions
uprobes/core: Rename bkpt to swbp
uprobes/core: Make order of function parameters consistent across functions
uprobes/core: Make macro names consistent
uprobes: Update copyright notices
uprobes/core: Move insn to arch specific structure
uprobes/core: Remove uprobe_opcode_sz
uprobes/core: Make instruction tables volatile
uprobes: Move to kernel/events/
uprobes/core: Clean up, refactor and improve the code
...
As:
make DEBUG=1 -C tools/perf
disables optimizations and _FORTIFY_SOURCE in recent distros requires
optimizations to be enabled, seen on a Fedora 17 system:
[acme@Fedora17 linux]$ make DEBUG=1 O=/home/acme/git/build/perf/ -C
tools/perf install
In file included from /usr/include/sys/types.h:26:0,
from /usr/include/libelf.h:53,
from /usr/include/gelf.h:53,
from /usr/include/elfutils/libdw.h:53,
from <stdin>:2:
/usr/include/features.h:314:4: error: #warning _FORTIFY_SOURCE requires
compiling with optimization (-O) [-Werror=cpp
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4ccyiebqju4uatm31ky7725b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The @type should be a type of enum event_type not enum filter_arg_type.
This fixes following warning:
$ make
COMPILE FPIC parse-events.o
COMPILE FPIC parse-filter.o
/home/namhyung/project/trace-cmd/parse-filter.c: In function ‘create_arg_item’:
/home/namhyung/project/trace-cmd/parse-filter.c:343:9: warning: comparison between ‘enum filter_arg_type’ and ‘enum event_type’ [-Wenum-compare]
/home/namhyung/project/trace-cmd/parse-filter.c:339:2: warning: case value ‘8’ not in enumerated type ‘enum filter_arg_type’ [-Wswitch]
BUILD STATIC LIB libparsevent.a
BUILD STATIC LIB libtracecmd.a
BUILD trace-cmd
/usr/bin/make -C /home/namhyung/project/trace-cmd/Documentation all
make[1]: Nothing to be done for `all'.
Note: to build the gui, type "make gui"
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337740619-27925-20-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The param needs to be updated when setting args up so that
the loop in process_defined_func() can see the correct
param->type for the farg.
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337740619-27925-15-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The @arg paremeter should not be freed inside of process_XXX(),
because it'd be freed from the caller of process_arg(). We can
free it only after it was reused for local usage.
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337740619-27925-14-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If set_op_prio() failed, the token will be freed at out_free,
then arg->op.op would turn out to be a dangle pointer. After
returning EVENT_ERROR from process_op(), free_arg() will be
called and then it will finally see the dangling pointer.
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337740619-27925-13-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If event_read_fields failed in the middle, each member of
struct format_field should be freed also.
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337740619-27925-11-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The __print_symbolic() function takes a sequence of key-value pairs for
pretty-printing a constant. The new kvm:kvm_exit print fmt uses the
expression:
__print_symbolic(..., { 0x040 + 1, "DB excp" }, ...)
Currently only atoms are supported and this print fmt fails to parse.
This patch adds support for expressions instead of just atoms so that
0x040 + 1 is parsed successfully.
Cc: Avi Kivity <avi@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337740619-27925-6-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was a global variable, so it was initialized, implicitely, to zero by
being placed in the bss.
Now it is just a local variable that is then passed to the __cmd_evlist
routine, so it must be explicitely set to NULL.
The problem manifested on a Fedora 17 system, using:
gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC)
But not on several other systems, by luck.
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5e8wolcjs3rgd5i6yi995gfh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
