mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-16 09:13:55 +08:00
10359213d0
8919 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Ebru Akagunduz
|
10359213d0 |
mm: incorporate read-only pages into transparent huge pages
This patch aims to improve THP collapse rates, by allowing THP collapse in the presence of read-only ptes, like those left in place by do_swap_page after a read fault. Currently THP can collapse 4kB pages into a THP when there are up to khugepaged_max_ptes_none pte_none ptes in a 2MB range. This patch applies the same limit for read-only ptes. The patch was tested with a test program that allocates 800MB of memory, writes to it, and then sleeps. I force the system to swap out all but 190MB of the program by touching other memory. Afterwards, the test program does a mix of reads and writes to its memory, and the memory gets swapped back in. Without the patch, only the memory that did not get swapped out remained in THPs, which corresponds to 24% of the memory of the program. The percentage did not increase over time. With this patch, after 5 minutes of waiting khugepaged had collapsed 50% of the program's memory back into THPs. Test results: With the patch: After swapped out: cat /proc/pid/smaps: Anonymous: 100464 kB AnonHugePages: 100352 kB Swap: 699540 kB Fraction: 99,88 cat /proc/meminfo: AnonPages: 1754448 kB AnonHugePages: 1716224 kB Fraction: 97,82 After swapped in: In a few seconds: cat /proc/pid/smaps: Anonymous: 800004 kB AnonHugePages: 145408 kB Swap: 0 kB Fraction: 18,17 cat /proc/meminfo: AnonPages: 2455016 kB AnonHugePages: 1761280 kB Fraction: 71,74 In 5 minutes: cat /proc/pid/smaps Anonymous: 800004 kB AnonHugePages: 407552 kB Swap: 0 kB Fraction: 50,94 cat /proc/meminfo: AnonPages: 2456872 kB AnonHugePages: 2023424 kB Fraction: 82,35 Without the patch: After swapped out: cat /proc/pid/smaps: Anonymous: 190660 kB AnonHugePages: 190464 kB Swap: 609344 kB Fraction: 99,89 cat /proc/meminfo: AnonPages: 1740456 kB AnonHugePages: 1667072 kB Fraction: 95,78 After swapped in: cat /proc/pid/smaps: Anonymous: 800004 kB AnonHugePages: 190464 kB Swap: 0 kB Fraction: 23,80 cat /proc/meminfo: AnonPages: 2350032 kB AnonHugePages: 1667072 kB Fraction: 70,93 I waited 10 minutes the fractions did not change without the patch. Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Michal Hocko
|
ba4877b9ca |
vmstat: do not use deferrable delayed work for vmstat_update
Vinayak Menon has reported that an excessive number of tasks was throttled in the direct reclaim inside too_many_isolated() because NR_ISOLATED_FILE was relatively high compared to NR_INACTIVE_FILE. However it turned out that the real number of NR_ISOLATED_FILE was 0 and the per-cpu vm_stat_diff wasn't transferred into the global counter. vmstat_work which is responsible for the sync is defined as deferrable delayed work which means that the defined timeout doesn't wake up an idle CPU. A CPU might stay in an idle state for a long time and general effort is to keep such a CPU in this state as long as possible which might lead to all sorts of troubles for vmstat consumers as can be seen with the excessive direct reclaim throttling. This patch basically reverts |
||
Vlastimil Babka
|
9c0415eb8c |
mm: more aggressive page stealing for UNMOVABLE allocations
When allocation falls back to stealing free pages of another migratetype, it can decide to steal extra pages, or even the whole pageblock in order to reduce fragmentation, which could happen if further allocation fallbacks pick a different pageblock. In try_to_steal_freepages(), one of the situations where extra pages are stolen happens when we are trying to allocate a MIGRATE_RECLAIMABLE page. However, MIGRATE_UNMOVABLE allocations are not treated the same way, although spreading such allocation over multiple fallback pageblocks is arguably even worse than it is for RECLAIMABLE allocations. To minimize fragmentation, we should minimize the number of such fallbacks, and thus steal as much as is possible from each fallback pageblock. Note that in theory this might put more pressure on movable pageblocks and cause movable allocations to steal back from unmovable pageblocks. However, movable allocations are not as aggressive with stealing, and do not cause permanent fragmentation, so the tradeoff is reasonable, and evaluation seems to support the change. This patch thus adds a check for MIGRATE_UNMOVABLE to the decision to steal extra free pages. When evaluating with stress-highalloc from mmtests, this has reduced the number of MIGRATE_UNMOVABLE fallbacks to roughly 1/6. The number of these fallbacks stealing from MIGRATE_MOVABLE block is reduced to 1/3. There was no observation of growing number of unmovable pageblocks over time, and also not of increased movable allocation fallbacks. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Minchan Kim <minchan@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Vlastimil Babka
|
3a1086fba9 |
mm: always steal split buddies in fallback allocations
When allocation falls back to another migratetype, it will steal a page with highest available order, and (depending on this order and desired migratetype), it might also steal the rest of free pages from the same pageblock. Given the preference of highest available order, it is likely that it will be higher than the desired order, and result in the stolen buddy page being split. The remaining pages after split are currently stolen only when the rest of the free pages are stolen. This can however lead to situations where for MOVABLE allocations we split e.g. order-4 fallback UNMOVABLE page, but steal only order-0 page. Then on the next MOVABLE allocation (which may be batched to fill the pcplists) we split another order-3 or higher page, etc. By stealing all pages that we have split, we can avoid further stealing. This patch therefore adjusts the page stealing so that buddy pages created by split are always stolen. This has effect only on MOVABLE allocations, as RECLAIMABLE and UNMOVABLE allocations already always do that in addition to stealing the rest of free pages from the pageblock. The change also allows to simplify try_to_steal_freepages() and factor out CMA handling. According to Mel, it has been intended since the beginning that buddy pages after split would be stolen always, but it doesn't seem like it was ever the case until commit |
||
|
Vlastimil Babka
|
99592d598e |
mm: when stealing freepages, also take pages created by splitting buddy page
When studying page stealing, I noticed some weird looking decisions in
try_to_steal_freepages(). The first I assume is a bug (Patch 1), the
following two patches were driven by evaluation.
Testing was done with stress-highalloc of mmtests, using the
mm_page_alloc_extfrag tracepoint and postprocessing to get counts of how
often page stealing occurs for individual migratetypes, and what
migratetypes are used for fallbacks. Arguably, the worst case of page
stealing is when UNMOVABLE allocation steals from MOVABLE pageblock.
RECLAIMABLE allocation stealing from MOVABLE allocation is also not ideal,
so the goal is to minimize these two cases.
The evaluation of v2 wasn't always clear win and Joonsoo questioned the
results. Here I used different baseline which includes RFC compaction
improvements from [1]. I found that the compaction improvements reduce
variability of stress-highalloc, so there's less noise in the data.
First, let's look at stress-highalloc configured to do sync compaction,
and how these patches reduce page stealing events during the test. First
column is after fresh reboot, other two are reiterations of test without
reboot. That was all accumulater over 5 re-iterations (so the benchmark
was run 5x3 times with 5 fresh restarts).
Baseline:
3.19-rc4 3.19-rc4 3.19-rc4
5-nothp-1 5-nothp-2 5-nothp-3
Page alloc extfrag event 10264225 8702233 10244125
Extfrag fragmenting 10263271 8701552 10243473
Extfrag fragmenting for unmovable 13595 17616 15960
Extfrag fragmenting unmovable placed with movable 7989 12193 8447
Extfrag fragmenting for reclaimable 658 1840 1817
Extfrag fragmenting reclaimable placed with movable 558 1677 1679
Extfrag fragmenting for movable 10249018 8682096 10225696
With Patch 1:
3.19-rc4 3.19-rc4 3.19-rc4
6-nothp-1 6-nothp-2 6-nothp-3
Page alloc extfrag event 11834954 9877523 9774860
Extfrag fragmenting 11833993 9876880 9774245
Extfrag fragmenting for unmovable 7342 16129 11712
Extfrag fragmenting unmovable placed with movable 4191 10547 6270
Extfrag fragmenting for reclaimable 373 1130 923
Extfrag fragmenting reclaimable placed with movable 302 906 738
Extfrag fragmenting for movable 11826278 9859621 9761610
With Patch 2:
3.19-rc4 3.19-rc4 3.19-rc4
7-nothp-1 7-nothp-2 7-nothp-3
Page alloc extfrag event 4725990 3668793 3807436
Extfrag fragmenting 4725104 3668252 3806898
Extfrag fragmenting for unmovable 6678 7974 7281
Extfrag fragmenting unmovable placed with movable 2051 3829 4017
Extfrag fragmenting for reclaimable 429 1208 1278
Extfrag fragmenting reclaimable placed with movable 369 976 1034
Extfrag fragmenting for movable 4717997 3659070 3798339
With Patch 3:
3.19-rc4 3.19-rc4 3.19-rc4
8-nothp-1 8-nothp-2 8-nothp-3
Page alloc extfrag event 5016183 4700142 3850633
Extfrag fragmenting 5015325 4699613 3850072
Extfrag fragmenting for unmovable 1312 3154 3088
Extfrag fragmenting unmovable placed with movable 1115 2777 2714
Extfrag fragmenting for reclaimable 437 1193 1097
Extfrag fragmenting reclaimable placed with movable 330 969 879
Extfrag fragmenting for movable 5013576 4695266 3845887
In v2 we've seen apparent regression with Patch 1 for unmovable events,
this is now gone, suggesting it was indeed noise. Here, each patch
improves the situation for unmovable events. Reclaimable is improved by
patch 1 and then either the same modulo noise, or perhaps sligtly worse -
a small price for unmovable improvements, IMHO. The number of movable
allocations falling back to other migratetypes is most noisy, but it's
reduced to half at Patch 2 nevertheless. These are least critical as
compaction can move them around.
If we look at success rates, the patches don't affect them, that didn't change.
Baseline:
3.19-rc4 3.19-rc4 3.19-rc4
5-nothp-1 5-nothp-2 5-nothp-3
Success 1 Min 49.00 ( 0.00%) 42.00 ( 14.29%) 41.00 ( 16.33%)
Success 1 Mean 51.00 ( 0.00%) 45.00 ( 11.76%) 42.60 ( 16.47%)
Success 1 Max 55.00 ( 0.00%) 51.00 ( 7.27%) 46.00 ( 16.36%)
Success 2 Min 53.00 ( 0.00%) 47.00 ( 11.32%) 44.00 ( 16.98%)
Success 2 Mean 59.60 ( 0.00%) 50.80 ( 14.77%) 48.20 ( 19.13%)
Success 2 Max 64.00 ( 0.00%) 56.00 ( 12.50%) 52.00 ( 18.75%)
Success 3 Min 84.00 ( 0.00%) 82.00 ( 2.38%) 78.00 ( 7.14%)
Success 3 Mean 85.60 ( 0.00%) 82.80 ( 3.27%) 79.40 ( 7.24%)
Success 3 Max 86.00 ( 0.00%) 83.00 ( 3.49%) 80.00 ( 6.98%)
Patch 1:
3.19-rc4 3.19-rc4 3.19-rc4
6-nothp-1 6-nothp-2 6-nothp-3
Success 1 Min 49.00 ( 0.00%) 44.00 ( 10.20%) 44.00 ( 10.20%)
Success 1 Mean 51.80 ( 0.00%) 46.00 ( 11.20%) 45.80 ( 11.58%)
Success 1 Max 54.00 ( 0.00%) 49.00 ( 9.26%) 49.00 ( 9.26%)
Success 2 Min 58.00 ( 0.00%) 49.00 ( 15.52%) 48.00 ( 17.24%)
Success 2 Mean 60.40 ( 0.00%) 51.80 ( 14.24%) 50.80 ( 15.89%)
Success 2 Max 63.00 ( 0.00%) 54.00 ( 14.29%) 55.00 ( 12.70%)
Success 3 Min 84.00 ( 0.00%) 81.00 ( 3.57%) 79.00 ( 5.95%)
Success 3 Mean 85.00 ( 0.00%) 81.60 ( 4.00%) 79.80 ( 6.12%)
Success 3 Max 86.00 ( 0.00%) 82.00 ( 4.65%) 82.00 ( 4.65%)
Patch 2:
3.19-rc4 3.19-rc4 3.19-rc4
7-nothp-1 7-nothp-2 7-nothp-3
Success 1 Min 50.00 ( 0.00%) 44.00 ( 12.00%) 39.00 ( 22.00%)
Success 1 Mean 52.80 ( 0.00%) 45.60 ( 13.64%) 42.40 ( 19.70%)
Success 1 Max 55.00 ( 0.00%) 46.00 ( 16.36%) 47.00 ( 14.55%)
Success 2 Min 52.00 ( 0.00%) 48.00 ( 7.69%) 45.00 ( 13.46%)
Success 2 Mean 53.40 ( 0.00%) 49.80 ( 6.74%) 48.80 ( 8.61%)
Success 2 Max 57.00 ( 0.00%) 52.00 ( 8.77%) 52.00 ( 8.77%)
Success 3 Min 84.00 ( 0.00%) 81.00 ( 3.57%) 79.00 ( 5.95%)
Success 3 Mean 85.00 ( 0.00%) 82.40 ( 3.06%) 79.60 ( 6.35%)
Success 3 Max 86.00 ( 0.00%) 83.00 ( 3.49%) 80.00 ( 6.98%)
Patch 3:
3.19-rc4 3.19-rc4 3.19-rc4
8-nothp-1 8-nothp-2 8-nothp-3
Success 1 Min 46.00 ( 0.00%) 44.00 ( 4.35%) 42.00 ( 8.70%)
Success 1 Mean 50.20 ( 0.00%) 45.60 ( 9.16%) 44.00 ( 12.35%)
Success 1 Max 52.00 ( 0.00%) 47.00 ( 9.62%) 47.00 ( 9.62%)
Success 2 Min 53.00 ( 0.00%) 49.00 ( 7.55%) 48.00 ( 9.43%)
Success 2 Mean 55.80 ( 0.00%) 50.60 ( 9.32%) 49.00 ( 12.19%)
Success 2 Max 59.00 ( 0.00%) 52.00 ( 11.86%) 51.00 ( 13.56%)
Success 3 Min 84.00 ( 0.00%) 80.00 ( 4.76%) 79.00 ( 5.95%)
Success 3 Mean 85.40 ( 0.00%) 81.60 ( 4.45%) 80.40 ( 5.85%)
Success 3 Max 87.00 ( 0.00%) 83.00 ( 4.60%) 82.00 ( 5.75%)
While there's no improvement here, I consider reduced fragmentation events
to be worth on its own. Patch 2 also seems to reduce scanning for free
pages, and migrations in compaction, suggesting it has somewhat less work
to do:
Patch 1:
Compaction stalls 4153 3959 3978
Compaction success 1523 1441 1446
Compaction failures 2630 2517 2531
Page migrate success 4600827 4943120 5104348
Page migrate failure 19763 16656 17806
Compaction pages isolated 9597640 10305617 10653541
Compaction migrate scanned 77828948 86533283 87137064
Compaction free scanned 517758295 521312840 521462251
Compaction cost 5503 5932 6110
Patch 2:
Compaction stalls 3800 3450 3518
Compaction success 1421 1316 1317
Compaction failures 2379 2134 2201
Page migrate success 4160421 4502708 4752148
Page migrate failure 19705 14340 14911
Compaction pages isolated 8731983 9382374 9910043
Compaction migrate scanned 98362797 96349194 98609686
Compaction free scanned 496512560 469502017 480442545
Compaction cost 5173 5526 5811
As with v2, /proc/pagetypeinfo appears unaffected with respect to numbers
of unmovable and reclaimable pageblocks.
Configuring the benchmark to allocate like THP page fault (i.e. no sync
compaction) gives much noisier results for iterations 2 and 3 after
reboot. This is not so surprising given how [1] offers lower improvements
in this scenario due to less restarts after deferred compaction which
would change compaction pivot.
Baseline:
3.19-rc4 3.19-rc4 3.19-rc4
5-thp-1 5-thp-2 5-thp-3
Page alloc extfrag event 8148965 6227815 6646741
Extfrag fragmenting 8147872 6227130 6646117
Extfrag fragmenting for unmovable 10324 12942 15975
Extfrag fragmenting unmovable placed with movable 5972 8495 10907
Extfrag fragmenting for reclaimable 601 1707 2210
Extfrag fragmenting reclaimable placed with movable 520 1570 2000
Extfrag fragmenting for movable 8136947 6212481 6627932
Patch 1:
3.19-rc4 3.19-rc4 3.19-rc4
6-thp-1 6-thp-2 6-thp-3
Page alloc extfrag event 8345457 7574471 7020419
Extfrag fragmenting 8343546 7573777 7019718
Extfrag fragmenting for unmovable 10256 18535 30716
Extfrag fragmenting unmovable placed with movable 6893 11726 22181
Extfrag fragmenting for reclaimable 465 1208 1023
Extfrag fragmenting reclaimable placed with movable 353 996 843
Extfrag fragmenting for movable 8332825 7554034 6987979
Patch 2:
3.19-rc4 3.19-rc4 3.19-rc4
7-thp-1 7-thp-2 7-thp-3
Page alloc extfrag event 3512847 3020756 2891625
Extfrag fragmenting 3511940 3020185 2891059
Extfrag fragmenting for unmovable 9017 6892 6191
Extfrag fragmenting unmovable placed with movable 1524 3053 2435
Extfrag fragmenting for reclaimable 445 1081 1160
Extfrag fragmenting reclaimable placed with movable 375 918 986
Extfrag fragmenting for movable
|
||
Naoya Horiguchi
|
1e25a271c8 |
mincore: apply page table walker on do_mincore()
This patch makes do_mincore() use walk_page_vma(), which reduces many lines of code by using common page table walk code. [daeseok.youn@gmail.com: remove unneeded variable 'err'] Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Naoya Horiguchi
|
48684a65b4 |
mm: pagewalk: fix misbehavior of walk_page_range for vma(VM_PFNMAP)
walk_page_range() silently skips vma having VM_PFNMAP set, which leads to undesirable behaviour at client end (who called walk_page_range). For example for pagemap_read(), when no callbacks are called against VM_PFNMAP vma, pagemap_read() may prepare pagemap data for next virtual address range at wrong index. That could confuse and/or break userspace applications. This patch avoid this misbehavior caused by vma(VM_PFNMAP) like follows: - for pagemap_read() which has its own ->pte_hole(), call the ->pte_hole() over vma(VM_PFNMAP), - for clear_refs and queue_pages which have their own ->tests_walk, just return 1 and skip vma(VM_PFNMAP). This is no problem because these are not interested in hole regions, - for other callers, just skip the vma(VM_PFNMAP) as a default behavior. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Shiraz Hashim <shashim@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Naoya Horiguchi
|
6f4576e368 |
mempolicy: apply page table walker on queue_pages_range()
queue_pages_range() does page table walking in its own way now, but there is some code duplicate. This patch applies page table walker to reduce lines of code. queue_pages_range() has to do some precheck to determine whether we really walk over the vma or just skip it. Now we have test_walk() callback in mm_walk for this purpose, so we can do this replacement cleanly. queue_pages_test_walk() depends on not only the current vma but also the previous one, so queue_pages->prev is introduced to remember it. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Naoya Horiguchi
|
26bcd64aa9 |
memcg: cleanup preparation for page table walk
pagewalk.c can handle vma in itself, so we don't have to pass vma via walk->private. And both of mem_cgroup_count_precharge() and mem_cgroup_move_charge() do for each vma loop themselves, but now it's done in pagewalk.c, so let's clean up them. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Naoya Horiguchi
|
900fc5f197 |
pagewalk: add walk_page_vma()
Introduce walk_page_vma(), which is useful for the callers which want to walk over a given vma. It's used by later patches. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Naoya Horiguchi
|
fafaa4264e |
pagewalk: improve vma handling
Current implementation of page table walker has a fundamental problem in vma handling, which started when we tried to handle vma(VM_HUGETLB). Because it's done in pgd loop, considering vma boundary makes code complicated and bug-prone. From the users viewpoint, some user checks some vma-related condition to determine whether the user really does page walk over the vma. In order to solve these, this patch moves vma check outside pgd loop and introduce a new callback ->test_walk(). Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Naoya Horiguchi
|
0b1fbfe500 |
mm/pagewalk: remove pgd_entry() and pud_entry()
Currently no user of page table walker sets ->pgd_entry() or ->pud_entry(), so checking their existence in each loop is just wasting CPU cycle. So let's remove it to reduce overhead. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Andrea Arcangeli
|
7e33912849 |
mm: gup: use get_user_pages_unlocked
This allows those get_user_pages calls to pass FAULT_FLAG_ALLOW_RETRY to the page fault in order to release the mmap_sem during the I/O. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Peter Feiner <pfeiner@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andrea Arcangeli
|
a7b780750e |
mm: gup: use get_user_pages_unlocked within get_user_pages_fast
This allows the get_user_pages_fast slow path to release the mmap_sem before blocking. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Peter Feiner <pfeiner@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andrea Arcangeli
|
0fd71a56f4 |
mm: gup: add __get_user_pages_unlocked to customize gup_flags
Some callers (like KVM) may want to set the gup_flags like FOLL_HWPOSION to get a proper -EHWPOSION retval instead of -EFAULT to take a more appropriate action if get_user_pages runs into a memory failure. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Peter Feiner <pfeiner@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andrea Arcangeli
|
f0818f472d |
mm: gup: add get_user_pages_locked and get_user_pages_unlocked
FAULT_FOLL_ALLOW_RETRY allows the page fault to drop the mmap_sem for reading to reduce the mmap_sem contention (for writing), like while waiting for I/O completion. The problem is that right now practically no get_user_pages call uses FAULT_FOLL_ALLOW_RETRY, so we're not leveraging that nifty feature. Andres fixed it for the KVM page fault. However get_user_pages_fast remains uncovered, and 99% of other get_user_pages aren't using it either (the only exception being FOLL_NOWAIT in KVM which is really nonblocking and in fact it doesn't even release the mmap_sem). So this patchsets extends the optimization Andres did in the KVM page fault to the whole kernel. It makes most important places (including gup_fast) to use FAULT_FOLL_ALLOW_RETRY to reduce the mmap_sem hold times during I/O. The only few places that remains uncovered are drivers like v4l and other exceptions that tends to work on their own memory and they're not working on random user memory (for example like O_DIRECT that uses gup_fast and is fully covered by this patch). A follow up patch should probably also add a printk_once warning to get_user_pages that should go obsolete and be phased out eventually. The "vmas" parameter of get_user_pages makes it fundamentally incompatible with FAULT_FOLL_ALLOW_RETRY (vmas array becomes meaningless the moment the mmap_sem is released). While this is just an optimization, this becomes an absolute requirement for the userfaultfd feature http://lwn.net/Articles/615086/ . The userfaultfd allows to block the page fault, and in order to do so I need to drop the mmap_sem first. So this patch also ensures that all memory where userfaultfd could be registered by KVM, the very first fault (no matter if it is a regular page fault, or a get_user_pages) always has FAULT_FOLL_ALLOW_RETRY set. Then the userfaultfd blocks and it is waken only when the pagetable is already mapped. The second fault attempt after the wakeup doesn't need FAULT_FOLL_ALLOW_RETRY, so it's ok to retry without it. This patch (of 5): We can leverage the VM_FAULT_RETRY functionality in the page fault paths better by using either get_user_pages_locked or get_user_pages_unlocked. The former allows conversion of get_user_pages invocations that will have to pass a "&locked" parameter to know if the mmap_sem was dropped during the call. Example from: down_read(&mm->mmap_sem); do_something() get_user_pages(tsk, mm, ..., pages, NULL); up_read(&mm->mmap_sem); to: int locked = 1; down_read(&mm->mmap_sem); do_something() get_user_pages_locked(tsk, mm, ..., pages, &locked); if (locked) up_read(&mm->mmap_sem); The latter is suitable only as a drop in replacement of the form: down_read(&mm->mmap_sem); get_user_pages(tsk, mm, ..., pages, NULL); up_read(&mm->mmap_sem); into: get_user_pages_unlocked(tsk, mm, ..., pages); Where tsk, mm, the intermediate "..." paramters and "pages" can be any value as before. Just the last parameter of get_user_pages (vmas) must be NULL for get_user_pages_locked|unlocked to be usable (the latter original form wouldn't have been safe anyway if vmas wasn't null, for the former we just make it explicit by dropping the parameter). If vmas is not NULL these two methods cannot be used. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com> Reviewed-by: Peter Feiner <pfeiner@google.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Vlastimil Babka
|
be97a41b29 |
mm/mempolicy.c: merge alloc_hugepage_vma to alloc_pages_vma
The previous commit ("mm/thp: Allocate transparent hugepages on local
node") introduced alloc_hugepage_vma() to mm/mempolicy.c to perform a
special policy for THP allocations. The function has the same interface
as alloc_pages_vma(), shares a lot of boilerplate code and a long
comment.
This patch merges the hugepage special case into alloc_pages_vma. The
extra if condition should be cheap enough price to pay. We also prevent
a (however unlikely) race with parallel mems_allowed update, which could
make hugepage allocation restart only within the fallback call to
alloc_hugepage_vma() and not reconsider the special rule in
alloc_hugepage_vma().
Also by making sure mpol_cond_put(pol) is always called before actual
allocation attempt, we can use a single exit path within the function.
Also update the comment for missing node parameter and obsolete reference
to mm_sem.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Aneesh Kumar K.V
|
077fcf116c |
mm/thp: allocate transparent hugepages on local node
This make sure that we try to allocate hugepages from local node if allowed by mempolicy. If we can't, we fallback to small page allocation based on mempolicy. This is based on the observation that allocating pages on local node is more beneficial than allocating hugepages on remote node. With this patch applied we may find transparent huge page allocation failures if the current node doesn't have enough freee hugepages. Before this patch such failures result in us retrying the allocation on other nodes in the numa node mask. [akpm@linux-foundation.org: fix comment, add CONFIG_TRANSPARENT_HUGEPAGE dependency] Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Joonsoo Kim
|
24e2716f63 |
mm/compaction: add tracepoint to observe behaviour of compaction defer
Compaction deferring logic is heavy hammer that block the way to the compaction. It doesn't consider overall system state, so it could prevent user from doing compaction falsely. In other words, even if system has enough range of memory to compact, compaction would be skipped due to compaction deferring logic. This patch add new tracepoint to understand work of deferring logic. This will also help to check compaction success and fail. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Joonsoo Kim
|
837d026d56 |
mm/compaction: more trace to understand when/why compaction start/finish
It is not well analyzed that when/why compaction start/finish or not. With these new tracepoints, we can know much more about start/finish reason of compaction. I can find following bug with these tracepoint. http://www.spinics.net/lists/linux-mm/msg81582.html Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Joonsoo Kim
|
e34d85f0e3 |
mm/compaction: print current range where compaction work
It'd be useful to know current range where compaction work for detailed analysis. With it, we can know pageblock where we actually scan and isolate, and, how much pages we try in that pageblock and can guess why it doesn't become freepage with pageblock order roughly. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Joonsoo Kim
|
16c4a097a0 |
mm/compaction: enhance tracepoint output for compaction begin/end
We now have tracepoint for begin event of compaction and it prints start position of both scanners, but, tracepoint for end event of compaction doesn't print finish position of both scanners. It'd be also useful to know finish position of both scanners so this patch add it. It will help to find odd behavior or problem on compaction internal logic. And mode is added to both begin/end tracepoint output, since according to mode, compaction behavior is quite different. And lastly, status format is changed to string rather than status number for readability. [akpm@linux-foundation.org: fix sparse warning] Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Konstantin Khebnikov
|
8d38633c3b |
page_writeback: put account_page_redirty() after set_page_dirty()
Helper account_page_redirty() fixes dirty pages counter for redirtied pages. This patch puts it after dirtying and prevents temporary underflows of dirtied pages counters on zone/bdi and current->nr_dirtied. Signed-off-by: Konstantin Khebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Kirill A. Shutemov
|
b30fe6c7ce |
mm: fix false-positive warning on exit due mm_nr_pmds(mm)
The problem is that we check nr_ptes/nr_pmds in exit_mmap() which happens *before* pgd_free(). And if an arch does pte/pmd allocation in pgd_alloc() and frees them in pgd_free() we see offset in counters by the time of the checks. We tried to workaround this by offsetting expected counter value according to FIRST_USER_ADDRESS for both nr_pte and nr_pmd in exit_mmap(). But it doesn't work in some cases: 1. ARM with LPAE enabled also has non-zero USER_PGTABLES_CEILING, but upper addresses occupied with huge pmd entries, so the trick with offsetting expected counter value will get really ugly: we will have to apply it nr_pmds, but not nr_ptes. 2. Metag has non-zero FIRST_USER_ADDRESS, but doesn't do allocation pte/pmd page tables allocation in pgd_alloc(), just setup a pgd entry which is allocated at boot and shared accross all processes. The proposal is to move the check to check_mm() which happens *after* pgd_free() and do proper accounting during pgd_alloc() and pgd_free() which would bring counters to zero if nothing leaked. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Tyler Baker <tyler.baker@linaro.org> Tested-by: Tyler Baker <tyler.baker@linaro.org> Tested-by: Nishanth Menon <nm@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: James Hogan <james.hogan@imgtec.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Kirill A. Shutemov
|
dc6c9a35b6 |
mm: account pmd page tables to the process
Dave noticed that unprivileged process can allocate significant amount of
memory -- >500 MiB on x86_64 -- and stay unnoticed by oom-killer and
memory cgroup. The trick is to allocate a lot of PMD page tables. Linux
kernel doesn't account PMD tables to the process, only PTE.
The use-cases below use few tricks to allocate a lot of PMD page tables
while keeping VmRSS and VmPTE low. oom_score for the process will be 0.
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/mman.h>
#include <sys/prctl.h>
#define PUD_SIZE (1UL << 30)
#define PMD_SIZE (1UL << 21)
#define NR_PUD 130000
int main(void)
{
char *addr = NULL;
unsigned long i;
prctl(PR_SET_THP_DISABLE);
for (i = 0; i < NR_PUD ; i++) {
addr = mmap(addr + PUD_SIZE, PUD_SIZE, PROT_WRITE|PROT_READ,
MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
if (addr == MAP_FAILED) {
perror("mmap");
break;
}
*addr = 'x';
munmap(addr, PMD_SIZE);
mmap(addr, PMD_SIZE, PROT_WRITE|PROT_READ,
MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED, -1, 0);
if (addr == MAP_FAILED)
perror("re-mmap"), exit(1);
}
printf("PID %d consumed %lu KiB in PMD page tables\n",
getpid(), i * 4096 >> 10);
return pause();
}
The patch addresses the issue by account PMD tables to the process the
same way we account PTE.
The main place where PMD tables is accounted is __pmd_alloc() and
free_pmd_range(). But there're few corner cases:
- HugeTLB can share PMD page tables. The patch handles by accounting
the table to all processes who share it.
- x86 PAE pre-allocates few PMD tables on fork.
- Architectures with FIRST_USER_ADDRESS > 0. We need to adjust sanity
check on exit(2).
Accounting only happens on configuration where PMD page table's level is
present (PMD is not folded). As with nr_ptes we use per-mm counter. The
counter value is used to calculate baseline for badness score by
oom-killer.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: David Rientjes <rientjes@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Johannes Weiner
|
21afa38eed |
mm: memcontrol: consolidate swap controller code
The swap controller code is scattered all over the file. Gather all the code that isn't directly needed by the memory controller at the end of the file in its own CONFIG_MEMCG_SWAP section. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Reviewed-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Johannes Weiner
|
95a045f63d |
mm: memcontrol: consolidate memory controller initialization
The initialization code for the per-cpu charge stock and the soft limit tree is compact enough to inline it into mem_cgroup_init(). Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Johannes Weiner
|
9c608dbe6a |
mm: memcontrol: simplify soft limit tree init code
- No need to test the node for N_MEMORY. node_online() is enough for node fallback to work in slab, use NUMA_NO_NODE for everything else. - Remove the BUG_ON() for allocation failure. A NULL pointer crash is just as descriptive, and the absent return value check is obvious. - Move local variables to the inner-most blocks. - Point to the tree structure after its initialized, not before, it's just more logical that way. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
George G. Davis
|
94737a85f3 |
mm: cma: fix totalcma_pages to include DT defined CMA regions
The totalcma_pages variable is not updated to account for CMA regions defined via device tree reserved-memory sub-nodes. Fix this omission by moving the calculation of totalcma_pages into cma_init_reserved_mem() instead of cma_declare_contiguous() such that it will include reserved memory used by all CMA regions. Signed-off-by: George G. Davis <george_davis@mentor.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
c32b3cbe0d |
oom, PM: make OOM detection in the freezer path raceless
Commit
|
||
|
Michal Hocko
|
63a8ca9b20 |
oom: thaw the OOM victim if it is frozen
oom_kill_process only sets TIF_MEMDIE flag and sends a signal to the victim. This is basically noop when the task is frozen though because the task sleeps in the uninterruptible sleep. The victim is eventually thawed later when oom_scan_process_thread meets the task again in a later OOM invocation so the OOM killer doesn't live lock. But this is less than optimal. Let's add __thaw_task into mark_tsk_oom_victim after we set TIF_MEMDIE to the victim. We are not checking whether the task is frozen because that would be racy and __thaw_task does that already. oom_scan_process_thread doesn't need to care about freezer anymore as TIF_MEMDIE and freezer are excluded completely now. Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
49550b6055 |
oom: add helpers for setting and clearing TIF_MEMDIE
This patchset addresses a race which was described in the changelog for
|
||
|
Johannes Weiner
|
1dfab5abcd |
mm: memcontrol: fold move_anon() and move_file()
Turn the move type enum into flags and give the flags field a shorter name. Once that is done, move_anon() and move_file() are simple enough to just fold them into the callsites. [akpm@linux-foundation.org: tweak MOVE_MASK definition, per Michal] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Johannes Weiner
|
241994ed86 |
mm: memcontrol: default hierarchy interface for memory
Introduce the basic control files to account, partition, and limit
memory using cgroups in default hierarchy mode.
This interface versioning allows us to address fundamental design
issues in the existing memory cgroup interface, further explained
below. The old interface will be maintained indefinitely, but a
clearer model and improved workload performance should encourage
existing users to switch over to the new one eventually.
The control files are thus:
- memory.current shows the current consumption of the cgroup and its
descendants, in bytes.
- memory.low configures the lower end of the cgroup's expected
memory consumption range. The kernel considers memory below that
boundary to be a reserve - the minimum that the workload needs in
order to make forward progress - and generally avoids reclaiming
it, unless there is an imminent risk of entering an OOM situation.
- memory.high configures the upper end of the cgroup's expected
memory consumption range. A cgroup whose consumption grows beyond
this threshold is forced into direct reclaim, to work off the
excess and to throttle new allocations heavily, but is generally
allowed to continue and the OOM killer is not invoked.
- memory.max configures the hard maximum amount of memory that the
cgroup is allowed to consume before the OOM killer is invoked.
- memory.events shows event counters that indicate how often the
cgroup was reclaimed while below memory.low, how often it was
forced to reclaim excess beyond memory.high, how often it hit
memory.max, and how often it entered OOM due to memory.max. This
allows users to identify configuration problems when observing a
degradation in workload performance. An overcommitted system will
have an increased rate of low boundary breaches, whereas increased
rates of high limit breaches, maximum hits, or even OOM situations
will indicate internally overcommitted cgroups.
For existing users of memory cgroups, the following deviations from
the current interface are worth pointing out and explaining:
- The original lower boundary, the soft limit, is defined as a limit
that is per default unset. As a result, the set of cgroups that
global reclaim prefers is opt-in, rather than opt-out. The costs
for optimizing these mostly negative lookups are so high that the
implementation, despite its enormous size, does not even provide
the basic desirable behavior. First off, the soft limit has no
hierarchical meaning. All configured groups are organized in a
global rbtree and treated like equal peers, regardless where they
are located in the hierarchy. This makes subtree delegation
impossible. Second, the soft limit reclaim pass is so aggressive
that it not just introduces high allocation latencies into the
system, but also impacts system performance due to overreclaim, to
the point where the feature becomes self-defeating.
The memory.low boundary on the other hand is a top-down allocated
reserve. A cgroup enjoys reclaim protection when it and all its
ancestors are below their low boundaries, which makes delegation
of subtrees possible. Secondly, new cgroups have no reserve per
default and in the common case most cgroups are eligible for the
preferred reclaim pass. This allows the new low boundary to be
efficiently implemented with just a minor addition to the generic
reclaim code, without the need for out-of-band data structures and
reclaim passes. Because the generic reclaim code considers all
cgroups except for the ones running low in the preferred first
reclaim pass, overreclaim of individual groups is eliminated as
well, resulting in much better overall workload performance.
- The original high boundary, the hard limit, is defined as a strict
limit that can not budge, even if the OOM killer has to be called.
But this generally goes against the goal of making the most out of
the available memory. The memory consumption of workloads varies
during runtime, and that requires users to overcommit. But doing
that with a strict upper limit requires either a fairly accurate
prediction of the working set size or adding slack to the limit.
Since working set size estimation is hard and error prone, and
getting it wrong results in OOM kills, most users tend to err on
the side of a looser limit and end up wasting precious resources.
The memory.high boundary on the other hand can be set much more
conservatively. When hit, it throttles allocations by forcing
them into direct reclaim to work off the excess, but it never
invokes the OOM killer. As a result, a high boundary that is
chosen too aggressively will not terminate the processes, but
instead it will lead to gradual performance degradation. The user
can monitor this and make corrections until the minimal memory
footprint that still gives acceptable performance is found.
In extreme cases, with many concurrent allocations and a complete
breakdown of reclaim progress within the group, the high boundary
can be exceeded. But even then it's mostly better to satisfy the
allocation from the slack available in other groups or the rest of
the system than killing the group. Otherwise, memory.max is there
to limit this type of spillover and ultimately contain buggy or
even malicious applications.
- The original control file names are unwieldy and inconsistent in
many different ways. For example, the upper boundary hit count is
exported in the memory.failcnt file, but an OOM event count has to
be manually counted by listening to memory.oom_control events, and
lower boundary / soft limit events have to be counted by first
setting a threshold for that value and then counting those events.
Also, usage and limit files encode their units in the filename.
That makes the filenames very long, even though this is not
information that a user needs to be reminded of every time they
type out those names.
To address these naming issues, as well as to signal clearly that
the new interface carries a new configuration model, the naming
conventions in it necessarily differ from the old interface.
- The original limit files indicate the state of an unset limit with
a very high number, and a configured limit can be unset by echoing
-1 into those files. But that very high number is implementation
and architecture dependent and not very descriptive. And while -1
can be understood as an underflow into the highest possible value,
-2 or -10M etc. do not work, so it's not inconsistent.
memory.low, memory.high, and memory.max will use the string
"infinity" to indicate and set the highest possible value.
[akpm@linux-foundation.org: use seq_puts() for basic strings]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Johannes Weiner
|
650c5e5654 |
mm: page_counter: pull "-1" handling out of page_counter_memparse()
The unified hierarchy interface for memory cgroups will no longer use "-1" to mean maximum possible resource value. In preparation for this, make the string an argument and let the caller supply it. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Juergen Gross
|
8d29e18a45 |
mm: use correct format specifiers when printing address ranges
Especially on 32 bit kernels memory node ranges are printed with 32 bit wide addresses only. Use u64 types and %llx specifiers to print full width of addresses. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Greg Thelen
|
0ca44b148e |
memcg: add BUILD_BUG_ON() for string tables
Use BUILD_BUG_ON() to compile assert that memcg string tables are in sync with corresponding enums. There aren't currently any issues with these tables. This is just defensive. Signed-off-by: Greg Thelen <gthelen@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vladimir Davydov
|
90cbc25088 |
vmscan: force scan offline memory cgroups
Since commit
|
||
|
Kirill A. Shutemov
|
81422f29c5 |
mm: more checks on free_pages_prepare() for tail pages
Although it was not called, destroy_compound_page() did some potentially useful checks. Let's re-introduce them in free_pages_prepare(), where they can be actually triggered when CONFIG_DEBUG_VM=y. compound_order() assert is already in free_pages_prepare(). We have few checks for tail pages left. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Kirill A. Shutemov
|
6e9f0d582d |
mm/page_alloc.c: drop dead destroy_compound_page()
The only caller is __free_one_page(). By the time we should have page->flags to be cleared already: - for 0-order pages though PCP list: free_hot_cold_page() free_pages_prepare() free_pages_check() page->flags &= ~PAGE_FLAGS_CHECK_AT_PREP; <put the page to PCP list> free_pcppages_bulk() page = <withdraw pages from PCP list> __free_one_page(page) - for non-0-order pages: __free_pages_ok() free_pages_prepare() free_pages_check() page->flags &= ~PAGE_FLAGS_CHECK_AT_PREP; free_one_page() __free_one_page() So there's no way PageCompound() will return true in __free_one_page(). Let's remove dead destroy_compound_page() and put assert for page->flags there instead. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Vlastimil Babka
|
05891fb065 |
mm: microoptimize zonelist operations
next_zones_zonelist() returns a zoneref pointer, as well as a zone pointer via extra parameter. Since the latter can be trivially obtained by dereferencing the former, the overhead of the extra parameter is unjustified. This patch thus removes the zone parameter from next_zones_zonelist(). Both callers happen to be in the same header file, so it's simple to add the zoneref dereference inline. We save some bytes of code size. add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-105 (-105) function old new delta nr_free_zone_pages 129 115 -14 __alloc_pages_nodemask 2300 2285 -15 get_page_from_freelist 2652 2576 -76 add/remove: 0/0 grow/shrink: 1/0 up/down: 10/0 (10) function old new delta try_to_compact_pages 569 579 +10 Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Minchan Kim <minchan@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Vlastimil Babka
|
1a6d53a105 |
mm: reduce try_to_compact_pages parameters
Expand the usage of the struct alloc_context introduced in the previous patch also for calling try_to_compact_pages(), to reduce the number of its parameters. Since the function is in different compilation unit, we need to move alloc_context definition in the shared mm/internal.h header. With this change we get simpler code and small savings of code size and stack usage: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-27 (-27) function old new delta __alloc_pages_direct_compact 283 256 -27 add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-13 (-13) function old new delta try_to_compact_pages 582 569 -13 Stack usage of __alloc_pages_direct_compact goes from 24 to none (per scripts/checkstack.pl). Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Minchan Kim <minchan@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Vlastimil Babka
|
a9263751e1 |
mm, page_alloc: reduce number of alloc_pages* functions' parameters
Introduce struct alloc_context to accumulate the numerous parameters passed between the alloc_pages* family of functions and get_page_from_freelist(). This excludes gfp_flags and alloc_info, which mutate too much along the way, and allocation order, which is conceptually different. The result is shorter function signatures, as well as overal code size and stack usage reductions. bloat-o-meter: add/remove: 0/0 grow/shrink: 1/2 up/down: 127/-310 (-183) function old new delta get_page_from_freelist 2525 2652 +127 __alloc_pages_direct_compact 329 283 -46 __alloc_pages_nodemask 2564 2300 -264 checkstack.pl: function old new __alloc_pages_nodemask 248 200 get_page_from_freelist 168 184 __alloc_pages_direct_compact 40 24 Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Minchan Kim <minchan@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Vlastimil Babka
|
753791910e |
mm: set page->pfmemalloc in prep_new_page()
The possibility of replacing the numerous parameters of alloc_pages*
functions with a single structure has been discussed when Minchan proposed
to expand the x86 kernel stack [1]. This series implements the change,
along with few more cleanups/microoptimizations.
The series is based on next-20150108 and I used gcc 4.8.3 20140627 on
openSUSE 13.2 for compiling. Config includess NUMA and COMPACTION.
The core change is the introduction of a new struct alloc_context, which looks
like this:
struct alloc_context {
struct zonelist *zonelist;
nodemask_t *nodemask;
struct zone *preferred_zone;
int classzone_idx;
int migratetype;
enum zone_type high_zoneidx;
};
All the contents is mostly constant, except that __alloc_pages_slowpath()
changes preferred_zone, classzone_idx and potentially zonelist. But
that's not a problem in case control returns to retry_cpuset: in
__alloc_pages_nodemask(), those will be reset to initial values again
(although it's a bit subtle). On the other hand, gfp_flags and alloc_info
mutate so much that it doesn't make sense to put them into alloc_context.
Still, the result is one parameter instead of up to 7. This is all in
Patch 2.
Patch 3 is a step to expand alloc_context usage out of page_alloc.c
itself. The function try_to_compact_pages() can also much benefit from
the parameter reduction, but it means the struct definition has to be
moved to a shared header.
Patch 1 should IMHO be included even if the rest is deemed not useful
enough. It improves maintainability and also has some code/stack
reduction. Patch 4 is OTOH a tiny optimization.
Overall bloat-o-meter results:
add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-460 (-460)
function old new delta
nr_free_zone_pages 129 115 -14
__alloc_pages_direct_compact 329 256 -73
get_page_from_freelist 2670 2576 -94
__alloc_pages_nodemask 2564 2285 -279
try_to_compact_pages 582 579 -3
Overall stack sizes per ./scripts/checkstack.pl:
old new delta
get_page_from_freelist: 184 184 0
__alloc_pages_nodemask 248 200 -48
__alloc_pages_direct_c 40 - -40
try_to_compact_pages 72 72 0
-88
[1] http://marc.info/?l=linux-mm&m=140142462528257&w=2
This patch (of 4):
prep_new_page() sets almost everything in the struct page of the page
being allocated, except page->pfmemalloc. This is not obvious and has at
least once led to a bug where page->pfmemalloc was forgotten to be set
correctly, see commit
|
||
|
Naoya Horiguchi
|
9fbc1f635f |
mm/hugetlb: add migration entry check in __unmap_hugepage_range
If __unmap_hugepage_range() tries to unmap the address range over which
hugepage migration is on the way, we get the wrong page because pte_page()
doesn't work for migration entries. This patch simply clears the pte for
migration entries as we do for hwpoison entries.
Fixes:
|
||
|
Naoya Horiguchi
|
a8bda28d87 |
mm/hugetlb: add migration/hwpoisoned entry check in hugetlb_change_protection
There is a race condition between hugepage migration and
change_protection(), where hugetlb_change_protection() doesn't care about
migration entries and wrongly overwrites them. That causes unexpected
results like kernel crash. HWPoison entries also can cause the same
problem.
This patch adds is_hugetlb_entry_(migration|hwpoisoned) check in this
function to do proper actions.
Fixes:
|
||
|
Naoya Horiguchi
|
0f792cf949 |
mm/hugetlb: fix getting refcount 0 page in hugetlb_fault()
When running the test which causes the race as shown in the previous patch,
we can hit the BUG "get_page() on refcount 0 page" in hugetlb_fault().
This race happens when pte turns into migration entry just after the first
check of is_hugetlb_entry_migration() in hugetlb_fault() passed with false.
To fix this, we need to check pte_present() again after huge_ptep_get().
This patch also reorders taking ptl and doing pte_page(), because
pte_page() should be done in ptl. Due to this reordering, we need use
trylock_page() in page != pagecache_page case to respect locking order.
Fixes:
|
||
|
Naoya Horiguchi
|
e66f17ff71 |
mm/hugetlb: take page table lock in follow_huge_pmd()
We have a race condition between move_pages() and freeing hugepages, where
move_pages() calls follow_page(FOLL_GET) for hugepages internally and
tries to get its refcount without preventing concurrent freeing. This
race crashes the kernel, so this patch fixes it by moving FOLL_GET code
for hugepages into follow_huge_pmd() with taking the page table lock.
This patch intentionally removes page==NULL check after pte_page.
This is justified because pte_page() never returns NULL for any
architectures or configurations.
This patch changes the behavior of follow_huge_pmd() for tail pages and
then tail pages can be pinned/returned. So the caller must be changed to
properly handle the returned tail pages.
We could have a choice to add the similar locking to
follow_huge_(addr|pud) for consistency, but it's not necessary because
currently these functions don't support FOLL_GET flag, so let's leave it
for future development.
Here is the reproducer:
$ cat movepages.c
#include <stdio.h>
#include <stdlib.h>
#include <numaif.h>
#define ADDR_INPUT 0x700000000000UL
#define HPS 0x200000
#define PS 0x1000
int main(int argc, char *argv[]) {
int i;
int nr_hp = strtol(argv[1], NULL, 0);
int nr_p = nr_hp * HPS / PS;
int ret;
void **addrs;
int *status;
int *nodes;
pid_t pid;
pid = strtol(argv[2], NULL, 0);
addrs = malloc(sizeof(char *) * nr_p + 1);
status = malloc(sizeof(char *) * nr_p + 1);
nodes = malloc(sizeof(char *) * nr_p + 1);
while (1) {
for (i = 0; i < nr_p; i++) {
addrs[i] = (void *)ADDR_INPUT + i * PS;
nodes[i] = 1;
status[i] = 0;
}
ret = numa_move_pages(pid, nr_p, addrs, nodes, status,
MPOL_MF_MOVE_ALL);
if (ret == -1)
err("move_pages");
for (i = 0; i < nr_p; i++) {
addrs[i] = (void *)ADDR_INPUT + i * PS;
nodes[i] = 0;
status[i] = 0;
}
ret = numa_move_pages(pid, nr_p, addrs, nodes, status,
MPOL_MF_MOVE_ALL);
if (ret == -1)
err("move_pages");
}
return 0;
}
$ cat hugepage.c
#include <stdio.h>
#include <sys/mman.h>
#include <string.h>
#define ADDR_INPUT 0x700000000000UL
#define HPS 0x200000
int main(int argc, char *argv[]) {
int nr_hp = strtol(argv[1], NULL, 0);
char *p;
while (1) {
p = mmap((void *)ADDR_INPUT, nr_hp * HPS, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB, -1, 0);
if (p != (void *)ADDR_INPUT) {
perror("mmap");
break;
}
memset(p, 0, nr_hp * HPS);
munmap(p, nr_hp * HPS);
}
}
$ sysctl vm.nr_hugepages=40
$ ./hugepage 10 &
$ ./movepages 10 $(pgrep -f hugepage)
Fixes:
|
||
|
Naoya Horiguchi
|
cbef8478be |
mm/hugetlb: pmd_huge() returns true for non-present hugepage
Migrating hugepages and hwpoisoned hugepages are considered as non-present
hugepages, and they are referenced via migration entries and hwpoison
entries in their page table slots.
This behavior causes race condition because pmd_huge() doesn't tell
non-huge pages from migrating/hwpoisoned hugepages. follow_page_mask() is
one example where the kernel would call follow_page_pte() for such
hugepage while this function is supposed to handle only normal pages.
To avoid this, this patch makes pmd_huge() return true when pmd_none() is
true *and* pmd_present() is false. We don't have to worry about mixing up
non-present pmd entry with normal pmd (pointing to leaf level pte entry)
because pmd_present() is true in normal pmd.
The same race condition could happen in (x86-specific) gup_pmd_range(),
where this patch simply adds pmd_present() check instead of pmd_huge().
This is because gup_pmd_range() is fast path. If we have non-present
hugepage in this function, we will go into gup_huge_pmd(), then return 0
at flag mask check, and finally fall back to the slow path.
Fixes:
|
||
|
Naoya Horiguchi
|
61f77eda9b |
mm/hugetlb: reduce arch dependent code around follow_huge_*
Currently we have many duplicates in definitions around follow_huge_addr(), follow_huge_pmd(), and follow_huge_pud(), so this patch tries to remove the m. The basic idea is to put the default implementation for these functions in mm/hugetlb.c as weak symbols (regardless of CONFIG_ARCH_WANT_GENERAL_HUGETL B), and to implement arch-specific code only when the arch needs it. For follow_huge_addr(), only powerpc and ia64 have their own implementation, and in all other architectures this function just returns ERR_PTR(-EINVAL). So this patch sets returning ERR_PTR(-EINVAL) as default. As for follow_huge_(pmd|pud)(), if (pmd|pud)_huge() is implemented to always return 0 in your architecture (like in ia64 or sparc,) it's never called (the callsite is optimized away) no matter how implemented it is. So in such architectures, we don't need arch-specific implementation. In some architecture (like mips, s390 and tile,) their current arch-specific follow_huge_(pmd|pud)() are effectively identical with the common code, so this patch lets these architecture use the common code. One exception is metag, where pmd_huge() could return non-zero but it expects follow_huge_pmd() to always return NULL. This means that we need arch-specific implementation which returns NULL. This behavior looks strange to me (because non-zero pmd_huge() implies that the architecture supports PMD-based hugepage, so follow_huge_pmd() can/should return some relevant value,) but that's beyond this cleanup patch, so let's keep it. Justification of non-trivial changes: - in s390, follow_huge_pmd() checks !MACHINE_HAS_HPAGE at first, and this patch removes the check. This is OK because we can assume MACHINE_HAS_HPAGE is true when follow_huge_pmd() can be called (note that pmd_huge() has the same check and always returns 0 for !MACHINE_HAS_HPAGE.) - in s390 and mips, we use HPAGE_MASK instead of PMD_MASK as done in common code. This patch forces these archs use PMD_MASK, but it's OK because they are identical in both archs. In s390, both of HPAGE_SHIFT and PMD_SHIFT are 20. In mips, HPAGE_SHIFT is defined as (PAGE_SHIFT + PAGE_SHIFT - 3) and PMD_SHIFT is define as (PAGE_SHIFT + PAGE_SHIFT + PTE_ORDER - 3), but PTE_ORDER is always 0, so these are identical. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Steve Capper <steve.capper@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |