renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-16 09:13:55 +08:00
Code
499,983 Commits 41 Branches 2 Tags 3.4 GiB
10359213d0
Commit Graph

499983 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Ebru Akagunduz
10359213d0 mm: incorporate read-only pages into transparent huge pages 
This patch aims to improve THP collapse rates, by allowing THP collapse in
the presence of read-only ptes, like those left in place by do_swap_page
after a read fault.

Currently THP can collapse 4kB pages into a THP when there are up to
khugepaged_max_ptes_none pte_none ptes in a 2MB range.  This patch applies
the same limit for read-only ptes.

The patch was tested with a test program that allocates 800MB of memory,
writes to it, and then sleeps.  I force the system to swap out all but
190MB of the program by touching other memory.  Afterwards, the test
program does a mix of reads and writes to its memory, and the memory gets
swapped back in.

Without the patch, only the memory that did not get swapped out remained
in THPs, which corresponds to 24% of the memory of the program.  The
percentage did not increase over time.

With this patch, after 5 minutes of waiting khugepaged had collapsed 50%
of the program's memory back into THPs.

Test results:

With the patch:
After swapped out:
cat /proc/pid/smaps:
Anonymous:      100464 kB
AnonHugePages:  100352 kB
Swap:           699540 kB
Fraction:       99,88

cat /proc/meminfo:
AnonPages:      1754448 kB
AnonHugePages:  1716224 kB
Fraction:       97,82

After swapped in:
In a few seconds:
cat /proc/pid/smaps:
Anonymous:      800004 kB
AnonHugePages:  145408 kB
Swap:           0 kB
Fraction:       18,17

cat /proc/meminfo:
AnonPages:      2455016 kB
AnonHugePages:  1761280 kB
Fraction:       71,74

In 5 minutes:
cat /proc/pid/smaps
Anonymous:      800004 kB
AnonHugePages:  407552 kB
Swap:           0 kB
Fraction:       50,94

cat /proc/meminfo:
AnonPages:      2456872 kB
AnonHugePages:  2023424 kB
Fraction:       82,35

Without the patch:
After swapped out:
cat /proc/pid/smaps:
Anonymous:      190660 kB
AnonHugePages:  190464 kB
Swap:           609344 kB
Fraction:       99,89

cat /proc/meminfo:
AnonPages:      1740456 kB
AnonHugePages:  1667072 kB
Fraction:       95,78

After swapped in:
cat /proc/pid/smaps:
Anonymous:      800004 kB
AnonHugePages:  190464 kB
Swap:           0 kB
Fraction:       23,80

cat /proc/meminfo:
AnonPages:      2350032 kB
AnonHugePages:  1667072 kB
Fraction:       70,93

I waited 10 minutes the fractions did not change without the patch.

Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:07 -08:00
Michal Hocko
ba4877b9ca vmstat: do not use deferrable delayed work for vmstat_update 
Vinayak Menon has reported that an excessive number of tasks was throttled
in the direct reclaim inside too_many_isolated() because NR_ISOLATED_FILE
was relatively high compared to NR_INACTIVE_FILE.  However it turned out
that the real number of NR_ISOLATED_FILE was 0 and the per-cpu
vm_stat_diff wasn't transferred into the global counter.

vmstat_work which is responsible for the sync is defined as deferrable
delayed work which means that the defined timeout doesn't wake up an idle
CPU.  A CPU might stay in an idle state for a long time and general effort
is to keep such a CPU in this state as long as possible which might lead
to all sorts of troubles for vmstat consumers as can be seen with the
excessive direct reclaim throttling.

This patch basically reverts 39bf6270f5 ("VM statistics: Make timer
deferrable") but it shouldn't cause any problems for idle CPUs because
only CPUs with an active per-cpu drift are woken up since 7cc36bbddd
("vmstat: on-demand vmstat workers v8") and CPUs which are idle for a
longer time shouldn't have per-cpu drift.

Fixes: 39bf6270f5 (VM statistics: Make timer deferrable)
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reported-by: Vinayak Menon <vinmenon@codeaurora.org>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:07 -08:00
Vlastimil Babka
9c0415eb8c mm: more aggressive page stealing for UNMOVABLE allocations 
When allocation falls back to stealing free pages of another migratetype,
it can decide to steal extra pages, or even the whole pageblock in order
to reduce fragmentation, which could happen if further allocation
fallbacks pick a different pageblock.  In try_to_steal_freepages(), one of
the situations where extra pages are stolen happens when we are trying to
allocate a MIGRATE_RECLAIMABLE page.

However, MIGRATE_UNMOVABLE allocations are not treated the same way,
although spreading such allocation over multiple fallback pageblocks is
arguably even worse than it is for RECLAIMABLE allocations.  To minimize
fragmentation, we should minimize the number of such fallbacks, and thus
steal as much as is possible from each fallback pageblock.

Note that in theory this might put more pressure on movable pageblocks and
cause movable allocations to steal back from unmovable pageblocks.
However, movable allocations are not as aggressive with stealing, and do
not cause permanent fragmentation, so the tradeoff is reasonable, and
evaluation seems to support the change.

This patch thus adds a check for MIGRATE_UNMOVABLE to the decision to
steal extra free pages.  When evaluating with stress-highalloc from
mmtests, this has reduced the number of MIGRATE_UNMOVABLE fallbacks to
roughly 1/6.  The number of these fallbacks stealing from MIGRATE_MOVABLE
block is reduced to 1/3.  There was no observation of growing number of
unmovable pageblocks over time, and also not of increased movable
allocation fallbacks.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:06 -08:00
Vlastimil Babka
3a1086fba9 mm: always steal split buddies in fallback allocations 
When allocation falls back to another migratetype, it will steal a page
with highest available order, and (depending on this order and desired
migratetype), it might also steal the rest of free pages from the same
pageblock.

Given the preference of highest available order, it is likely that it will
be higher than the desired order, and result in the stolen buddy page
being split.  The remaining pages after split are currently stolen only
when the rest of the free pages are stolen.  This can however lead to
situations where for MOVABLE allocations we split e.g.  order-4 fallback
UNMOVABLE page, but steal only order-0 page.  Then on the next MOVABLE
allocation (which may be batched to fill the pcplists) we split another
order-3 or higher page, etc.  By stealing all pages that we have split, we
can avoid further stealing.

This patch therefore adjusts the page stealing so that buddy pages created
by split are always stolen.  This has effect only on MOVABLE allocations,
as RECLAIMABLE and UNMOVABLE allocations already always do that in
addition to stealing the rest of free pages from the pageblock.  The
change also allows to simplify try_to_steal_freepages() and factor out CMA
handling.

According to Mel, it has been intended since the beginning that buddy
pages after split would be stolen always, but it doesn't seem like it was
ever the case until commit 47118af076 ("mm: mmzone: MIGRATE_CMA
migration type added").  The commit has unintentionally introduced this
behavior, but was reverted by commit 0cbef29a78 ("mm:
__rmqueue_fallback() should respect pageblock type").  Neither included
evaluation.

My evaluation with stress-highalloc from mmtests shows about 2.5x
reduction of page stealing events for MOVABLE allocations, without
affecting the page stealing events for other allocation migratetypes.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:06 -08:00
Vlastimil Babka
99592d598e mm: when stealing freepages, also take pages created by splitting buddy page 
When studying page stealing, I noticed some weird looking decisions in
try_to_steal_freepages().  The first I assume is a bug (Patch 1), the
following two patches were driven by evaluation.

Testing was done with stress-highalloc of mmtests, using the
mm_page_alloc_extfrag tracepoint and postprocessing to get counts of how
often page stealing occurs for individual migratetypes, and what
migratetypes are used for fallbacks.  Arguably, the worst case of page
stealing is when UNMOVABLE allocation steals from MOVABLE pageblock.
RECLAIMABLE allocation stealing from MOVABLE allocation is also not ideal,
so the goal is to minimize these two cases.

The evaluation of v2 wasn't always clear win and Joonsoo questioned the
results.  Here I used different baseline which includes RFC compaction
improvements from [1].  I found that the compaction improvements reduce
variability of stress-highalloc, so there's less noise in the data.

First, let's look at stress-highalloc configured to do sync compaction,
and how these patches reduce page stealing events during the test.  First
column is after fresh reboot, other two are reiterations of test without
reboot.  That was all accumulater over 5 re-iterations (so the benchmark
was run 5x3 times with 5 fresh restarts).

Baseline:

                                                   3.19-rc4        3.19-rc4        3.19-rc4
                                                  5-nothp-1       5-nothp-2       5-nothp-3
Page alloc extfrag event                               10264225     8702233    10244125
Extfrag fragmenting                                    10263271     8701552    10243473
Extfrag fragmenting for unmovable                         13595       17616       15960
Extfrag fragmenting unmovable placed with movable          7989       12193        8447
Extfrag fragmenting for reclaimable                         658        1840        1817
Extfrag fragmenting reclaimable placed with movable         558        1677        1679
Extfrag fragmenting for movable                        10249018     8682096    10225696

With Patch 1:
                                                   3.19-rc4        3.19-rc4        3.19-rc4
                                                  6-nothp-1       6-nothp-2       6-nothp-3
Page alloc extfrag event                               11834954     9877523     9774860
Extfrag fragmenting                                    11833993     9876880     9774245
Extfrag fragmenting for unmovable                          7342       16129       11712
Extfrag fragmenting unmovable placed with movable          4191       10547        6270
Extfrag fragmenting for reclaimable                         373        1130         923
Extfrag fragmenting reclaimable placed with movable         302         906         738
Extfrag fragmenting for movable                        11826278     9859621     9761610

With Patch 2:
                                                   3.19-rc4        3.19-rc4        3.19-rc4
                                                  7-nothp-1       7-nothp-2       7-nothp-3
Page alloc extfrag event                                4725990     3668793     3807436
Extfrag fragmenting                                     4725104     3668252     3806898
Extfrag fragmenting for unmovable                          6678        7974        7281
Extfrag fragmenting unmovable placed with movable          2051        3829        4017
Extfrag fragmenting for reclaimable                         429        1208        1278
Extfrag fragmenting reclaimable placed with movable         369         976        1034
Extfrag fragmenting for movable                         4717997     3659070     3798339

With Patch 3:
                                                   3.19-rc4        3.19-rc4        3.19-rc4
                                                  8-nothp-1       8-nothp-2       8-nothp-3
Page alloc extfrag event                                5016183     4700142     3850633
Extfrag fragmenting                                     5015325     4699613     3850072
Extfrag fragmenting for unmovable                          1312        3154        3088
Extfrag fragmenting unmovable placed with movable          1115        2777        2714
Extfrag fragmenting for reclaimable                         437        1193        1097
Extfrag fragmenting reclaimable placed with movable         330         969         879
Extfrag fragmenting for movable                         5013576     4695266     3845887

In v2 we've seen apparent regression with Patch 1 for unmovable events,
this is now gone, suggesting it was indeed noise.  Here, each patch
improves the situation for unmovable events.  Reclaimable is improved by
patch 1 and then either the same modulo noise, or perhaps sligtly worse -
a small price for unmovable improvements, IMHO.  The number of movable
allocations falling back to other migratetypes is most noisy, but it's
reduced to half at Patch 2 nevertheless.  These are least critical as
compaction can move them around.

If we look at success rates, the patches don't affect them, that didn't change.

Baseline:
                             3.19-rc4              3.19-rc4              3.19-rc4
                            5-nothp-1             5-nothp-2             5-nothp-3
Success 1 Min         49.00 (  0.00%)       42.00 ( 14.29%)       41.00 ( 16.33%)
Success 1 Mean        51.00 (  0.00%)       45.00 ( 11.76%)       42.60 ( 16.47%)
Success 1 Max         55.00 (  0.00%)       51.00 (  7.27%)       46.00 ( 16.36%)
Success 2 Min         53.00 (  0.00%)       47.00 ( 11.32%)       44.00 ( 16.98%)
Success 2 Mean        59.60 (  0.00%)       50.80 ( 14.77%)       48.20 ( 19.13%)
Success 2 Max         64.00 (  0.00%)       56.00 ( 12.50%)       52.00 ( 18.75%)
Success 3 Min         84.00 (  0.00%)       82.00 (  2.38%)       78.00 (  7.14%)
Success 3 Mean        85.60 (  0.00%)       82.80 (  3.27%)       79.40 (  7.24%)
Success 3 Max         86.00 (  0.00%)       83.00 (  3.49%)       80.00 (  6.98%)

Patch 1:
                             3.19-rc4              3.19-rc4              3.19-rc4
                            6-nothp-1             6-nothp-2             6-nothp-3
Success 1 Min         49.00 (  0.00%)       44.00 ( 10.20%)       44.00 ( 10.20%)
Success 1 Mean        51.80 (  0.00%)       46.00 ( 11.20%)       45.80 ( 11.58%)
Success 1 Max         54.00 (  0.00%)       49.00 (  9.26%)       49.00 (  9.26%)
Success 2 Min         58.00 (  0.00%)       49.00 ( 15.52%)       48.00 ( 17.24%)
Success 2 Mean        60.40 (  0.00%)       51.80 ( 14.24%)       50.80 ( 15.89%)
Success 2 Max         63.00 (  0.00%)       54.00 ( 14.29%)       55.00 ( 12.70%)
Success 3 Min         84.00 (  0.00%)       81.00 (  3.57%)       79.00 (  5.95%)
Success 3 Mean        85.00 (  0.00%)       81.60 (  4.00%)       79.80 (  6.12%)
Success 3 Max         86.00 (  0.00%)       82.00 (  4.65%)       82.00 (  4.65%)

Patch 2:

                             3.19-rc4              3.19-rc4              3.19-rc4
                            7-nothp-1             7-nothp-2             7-nothp-3
Success 1 Min         50.00 (  0.00%)       44.00 ( 12.00%)       39.00 ( 22.00%)
Success 1 Mean        52.80 (  0.00%)       45.60 ( 13.64%)       42.40 ( 19.70%)
Success 1 Max         55.00 (  0.00%)       46.00 ( 16.36%)       47.00 ( 14.55%)
Success 2 Min         52.00 (  0.00%)       48.00 (  7.69%)       45.00 ( 13.46%)
Success 2 Mean        53.40 (  0.00%)       49.80 (  6.74%)       48.80 (  8.61%)
Success 2 Max         57.00 (  0.00%)       52.00 (  8.77%)       52.00 (  8.77%)
Success 3 Min         84.00 (  0.00%)       81.00 (  3.57%)       79.00 (  5.95%)
Success 3 Mean        85.00 (  0.00%)       82.40 (  3.06%)       79.60 (  6.35%)
Success 3 Max         86.00 (  0.00%)       83.00 (  3.49%)       80.00 (  6.98%)

Patch 3:
                             3.19-rc4              3.19-rc4              3.19-rc4
                            8-nothp-1             8-nothp-2             8-nothp-3
Success 1 Min         46.00 (  0.00%)       44.00 (  4.35%)       42.00 (  8.70%)
Success 1 Mean        50.20 (  0.00%)       45.60 (  9.16%)       44.00 ( 12.35%)
Success 1 Max         52.00 (  0.00%)       47.00 (  9.62%)       47.00 (  9.62%)
Success 2 Min         53.00 (  0.00%)       49.00 (  7.55%)       48.00 (  9.43%)
Success 2 Mean        55.80 (  0.00%)       50.60 (  9.32%)       49.00 ( 12.19%)
Success 2 Max         59.00 (  0.00%)       52.00 ( 11.86%)       51.00 ( 13.56%)
Success 3 Min         84.00 (  0.00%)       80.00 (  4.76%)       79.00 (  5.95%)
Success 3 Mean        85.40 (  0.00%)       81.60 (  4.45%)       80.40 (  5.85%)
Success 3 Max         87.00 (  0.00%)       83.00 (  4.60%)       82.00 (  5.75%)

While there's no improvement here, I consider reduced fragmentation events
to be worth on its own.  Patch 2 also seems to reduce scanning for free
pages, and migrations in compaction, suggesting it has somewhat less work
to do:

Patch 1:

Compaction stalls                 4153        3959        3978
Compaction success                1523        1441        1446
Compaction failures               2630        2517        2531
Page migrate success           4600827     4943120     5104348
Page migrate failure             19763       16656       17806
Compaction pages isolated      9597640    10305617    10653541
Compaction migrate scanned    77828948    86533283    87137064
Compaction free scanned      517758295   521312840   521462251
Compaction cost                   5503        5932        6110

Patch 2:

Compaction stalls                 3800        3450        3518
Compaction success                1421        1316        1317
Compaction failures               2379        2134        2201
Page migrate success           4160421     4502708     4752148
Page migrate failure             19705       14340       14911
Compaction pages isolated      8731983     9382374     9910043
Compaction migrate scanned    98362797    96349194    98609686
Compaction free scanned      496512560   469502017   480442545
Compaction cost                   5173        5526        5811

As with v2, /proc/pagetypeinfo appears unaffected with respect to numbers
of unmovable and reclaimable pageblocks.

Configuring the benchmark to allocate like THP page fault (i.e.  no sync
compaction) gives much noisier results for iterations 2 and 3 after
reboot.  This is not so surprising given how [1] offers lower improvements
in this scenario due to less restarts after deferred compaction which
would change compaction pivot.

Baseline:
                                                   3.19-rc4        3.19-rc4        3.19-rc4
                                                    5-thp-1         5-thp-2         5-thp-3
Page alloc extfrag event                                8148965     6227815     6646741
Extfrag fragmenting                                     8147872     6227130     6646117
Extfrag fragmenting for unmovable                         10324       12942       15975
Extfrag fragmenting unmovable placed with movable          5972        8495       10907
Extfrag fragmenting for reclaimable                         601        1707        2210
Extfrag fragmenting reclaimable placed with movable         520        1570        2000
Extfrag fragmenting for movable                         8136947     6212481     6627932

Patch 1:
                                                   3.19-rc4        3.19-rc4        3.19-rc4
                                                    6-thp-1         6-thp-2         6-thp-3
Page alloc extfrag event                                8345457     7574471     7020419
Extfrag fragmenting                                     8343546     7573777     7019718
Extfrag fragmenting for unmovable                         10256       18535       30716
Extfrag fragmenting unmovable placed with movable          6893       11726       22181
Extfrag fragmenting for reclaimable                         465        1208        1023
Extfrag fragmenting reclaimable placed with movable         353         996         843
Extfrag fragmenting for movable                         8332825     7554034     6987979

Patch 2:
                                                   3.19-rc4        3.19-rc4        3.19-rc4
                                                    7-thp-1         7-thp-2         7-thp-3
Page alloc extfrag event                                3512847     3020756     2891625
Extfrag fragmenting                                     3511940     3020185     2891059
Extfrag fragmenting for unmovable                          9017        6892        6191
Extfrag fragmenting unmovable placed with movable          1524        3053        2435
Extfrag fragmenting for reclaimable                         445        1081        1160
Extfrag fragmenting reclaimable placed with movable         375         918         986
Extfrag fragmenting for movable                         3502478     3012212     2883708

Patch 3:
                                                   3.19-rc4        3.19-rc4        3.19-rc4
                                                    8-thp-1         8-thp-2         8-thp-3
Page alloc extfrag event                                3181699     3082881     2674164
Extfrag fragmenting                                     3180812     3082303     2673611
Extfrag fragmenting for unmovable                          1201        4031        4040
Extfrag fragmenting unmovable placed with movable           974        3611        3645
Extfrag fragmenting for reclaimable                         478        1165        1294
Extfrag fragmenting reclaimable placed with movable         387         985        1030
Extfrag fragmenting for movable                         3179133     3077107     2668277

The improvements for first iteration are clear, the rest is much noisier
and can appear like regression for Patch 1.  Anyway, patch 2 rectifies it.

Allocation success rates are again unaffected so there's no point in
making this e-mail any longer.

[1] http://marc.info/?l=linux-mm&m=142166196321125&w=2

This patch (of 3):

When __rmqueue_fallback() is called to allocate a page of order X, it will
find a page of order Y >= X of a fallback migratetype, which is different
from the desired migratetype.  With the help of try_to_steal_freepages(),
it may change the migratetype (to the desired one) also of:

1) all currently free pages in the pageblock containing the fallback page
2) the fallback pageblock itself
3) buddy pages created by splitting the fallback page (when Y > X)

These decisions take the order Y into account, as well as the desired
migratetype, with the goal of preventing multiple fallback allocations
that could e.g.  distribute UNMOVABLE allocations among multiple
pageblocks.

Originally, decision for 1) has implied the decision for 3).  Commit
47118af076 ("mm: mmzone: MIGRATE_CMA migration type added") changed that
(probably unintentionally) so that the buddy pages in case 3) are always
changed to the desired migratetype, except for CMA pageblocks.

Commit fef903efcf ("mm/page_allo.c: restructure free-page stealing code
and fix a bug") did some refactoring and added a comment that the case of
3) is intended.  Commit 0cbef29a78 ("mm: __rmqueue_fallback() should
respect pageblock type") removed the comment and tried to restore the
original behavior where 1) implies 3), but due to the previous
refactoring, the result is instead that only 2) implies 3) - and the
conditions for 2) are less frequently met than conditions for 1).  This
may increase fragmentation in situations where the code decides to steal
all free pages from the pageblock (case 1)), but then gives back the buddy
pages produced by splitting.

This patch restores the original intended logic where 1) implies 3).
During testing with stress-highalloc from mmtests, this has shown to
decrease the number of events where UNMOVABLE and RECLAIMABLE allocations
steal from MOVABLE pageblocks, which can lead to permanent fragmentation.
In some cases it has increased the number of events when MOVABLE
allocations steal from UNMOVABLE or RECLAIMABLE pageblocks, but these are
fixable by sync compaction and thus less harmful.

Note that evaluation has shown that the behavior introduced by
47118af076 for buddy pages in case 3) is actually even better than the
original logic, so the following patch will introduce it properly once
again.  For stable backports of this patch it makes thus sense to only fix
versions containing 0cbef29a78.

[iamjoonsoo.kim@lge.com: tracepoint fix]
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>	[3.13+ containing 0cbef29a78]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:06 -08:00
Naoya Horiguchi
1e25a271c8 mincore: apply page table walker on do_mincore() 
This patch makes do_mincore() use walk_page_vma(), which reduces many
lines of code by using common page table walk code.

[daeseok.youn@gmail.com: remove unneeded variable 'err']
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:06 -08:00
Kirill A. Shutemov
7d5b3bfaa2 mm: /proc/pid/clear_refs: avoid split_huge_page() 
Currently pagewalker splits all THP pages on any clear_refs request.  It's
not necessary.  We can handle this on PMD level.

One side effect is that soft dirty will potentially see more dirty memory,
since we will mark whole THP page dirty at once.

Sanity checked with CRIU test suite. More testing is required.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:06 -08:00
Naoya Horiguchi
48684a65b4 mm: pagewalk: fix misbehavior of walk_page_range for vma(VM_PFNMAP) 
walk_page_range() silently skips vma having VM_PFNMAP set, which leads to
undesirable behaviour at client end (who called walk_page_range).  For
example for pagemap_read(), when no callbacks are called against VM_PFNMAP
vma, pagemap_read() may prepare pagemap data for next virtual address
range at wrong index.  That could confuse and/or break userspace
applications.

This patch avoid this misbehavior caused by vma(VM_PFNMAP) like follows:
- for pagemap_read() which has its own ->pte_hole(), call the ->pte_hole()
  over vma(VM_PFNMAP),
- for clear_refs and queue_pages which have their own ->tests_walk,
  just return 1 and skip vma(VM_PFNMAP). This is no problem because
  these are not interested in hole regions,
- for other callers, just skip the vma(VM_PFNMAP) as a default behavior.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Shiraz Hashim <shashim@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:06 -08:00
Naoya Horiguchi
6f4576e368 mempolicy: apply page table walker on queue_pages_range() 
queue_pages_range() does page table walking in its own way now, but there
is some code duplicate.  This patch applies page table walker to reduce
lines of code.

queue_pages_range() has to do some precheck to determine whether we really
walk over the vma or just skip it.  Now we have test_walk() callback in
mm_walk for this purpose, so we can do this replacement cleanly.
queue_pages_test_walk() depends on not only the current vma but also the
previous one, so queue_pages->prev is introduced to remember it.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:06 -08:00
Naoya Horiguchi
1757bbd9c5 arch/powerpc/mm/subpage-prot.c: use walk->vma and walk_page_vma() 
We don't have to use mm_walk->private to pass vma to the callback function
because of mm_walk->vma.  And walk_page_vma() is useful if we walk over a
single vma.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:06 -08:00
Naoya Horiguchi
26bcd64aa9 memcg: cleanup preparation for page table walk 
pagewalk.c can handle vma in itself, so we don't have to pass vma via
walk->private.  And both of mem_cgroup_count_precharge() and
mem_cgroup_move_charge() do for each vma loop themselves, but now it's
done in pagewalk.c, so let's clean up them.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:06 -08:00
Naoya Horiguchi
d85f4d6d3b numa_maps: remove numa_maps->vma 
pagewalk.c can handle vma in itself, so we don't have to pass vma via
walk->private.  And show_numa_map() walks pages on vma basis, so using
walk_page_vma() is preferable.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:06 -08:00
Naoya Horiguchi
632fd60fe4 numa_maps: fix typo in gather_hugetbl_stats 
Just doing s/gather_hugetbl_stats/gather_hugetlb_stats/g, this makes code
grep-friendly.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:06 -08:00
Naoya Horiguchi
f995ece24d pagemap: use walk->vma instead of calling find_vma() 
Page table walker has the information of the current vma in mm_walk, so we
don't have to call find_vma() in each pagemap_(pte|hugetlb)_range() call
any longer.  Currently pagemap_pte_range() does vma loop itself, so this
patch reduces many lines of code.

NULL-vma check is omitted because we assume that we never run these
callbacks on any address outside vma.  And even if it were broken, NULL
pointer dereference would be detected, so we can get enough information
for debugging.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:05 -08:00
Naoya Horiguchi
5c64f52acd clear_refs: remove clear_refs_private->vma and introduce clear_refs_test_walk() 
clear_refs_write() has some prechecks to determine if we really walk over
a given vma.  Now we have a test_walk() callback to filter vmas, so let's
utilize it.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:05 -08:00
Naoya Horiguchi
14eb6fdd42 smaps: remove mem_size_stats->vma and use walk_page_vma() 
pagewalk.c can handle vma in itself, so we don't have to pass vma via
walk->private.  And show_smap() walks pages on vma basis, so using
walk_page_vma() is preferable.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:05 -08:00
Naoya Horiguchi
900fc5f197 pagewalk: add walk_page_vma() 
Introduce walk_page_vma(), which is useful for the callers which want to
walk over a given vma.  It's used by later patches.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:05 -08:00
Naoya Horiguchi
fafaa4264e pagewalk: improve vma handling 
Current implementation of page table walker has a fundamental problem in
vma handling, which started when we tried to handle vma(VM_HUGETLB).
Because it's done in pgd loop, considering vma boundary makes code
complicated and bug-prone.

From the users viewpoint, some user checks some vma-related condition to
determine whether the user really does page walk over the vma.

In order to solve these, this patch moves vma check outside pgd loop and
introduce a new callback ->test_walk().

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:05 -08:00
Naoya Horiguchi
0b1fbfe500 mm/pagewalk: remove pgd_entry() and pud_entry() 
Currently no user of page table walker sets ->pgd_entry() or
->pud_entry(), so checking their existence in each loop is just wasting
CPU cycle.  So let's remove it to reduce overhead.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:05 -08:00
Konstantin Khlebnikov
05fbf357d9 proc/pagemap: walk page tables under pte lock 
Lockless access to pte in pagemap_pte_range() might race with page
migration and trigger BUG_ON(!PageLocked()) in migration_entry_to_page():

CPU A (pagemap)                           CPU B (migration)
                                          lock_page()
                                          try_to_unmap(page, TTU_MIGRATION...)
                                               make_migration_entry()
                                               set_pte_at()
<read *pte>
pte_to_pagemap_entry()
                                          remove_migration_ptes()
                                          unlock_page()
    if(is_migration_entry())
        migration_entry_to_page()
            BUG_ON(!PageLocked(page))

Also lockless read might be non-atomic if pte is larger than wordsize.
Other pte walkers (smaps, numa_maps, clear_refs) already lock ptes.

Fixes: 052fb0d635 ("proc: report file/anon bit in /proc/pid/pagemap")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reported-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>	[3.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:05 -08:00
Andrea Arcangeli
0664e57ff0 mm: gup: kvm use get_user_pages_unlocked 
Use the more generic get_user_pages_unlocked which has the additional
benefit of passing FAULT_FLAG_ALLOW_RETRY at the very first page fault
(which allows the first page fault in an unmapped area to be always able
to block indefinitely by being allowed to release the mmap_sem).

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Peter Feiner <pfeiner@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:05 -08:00
Andrea Arcangeli
7e33912849 mm: gup: use get_user_pages_unlocked 
This allows those get_user_pages calls to pass FAULT_FLAG_ALLOW_RETRY to
the page fault in order to release the mmap_sem during the I/O.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Peter Feiner <pfeiner@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:05 -08:00
Andrea Arcangeli
a7b780750e mm: gup: use get_user_pages_unlocked within get_user_pages_fast 
This allows the get_user_pages_fast slow path to release the mmap_sem
before blocking.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Peter Feiner <pfeiner@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:05 -08:00
Andrea Arcangeli
0fd71a56f4 mm: gup: add __get_user_pages_unlocked to customize gup_flags 
Some callers (like KVM) may want to set the gup_flags like FOLL_HWPOSION
to get a proper -EHWPOSION retval instead of -EFAULT to take a more
appropriate action if get_user_pages runs into a memory failure.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Peter Feiner <pfeiner@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:05 -08:00
Andrea Arcangeli
f0818f472d mm: gup: add get_user_pages_locked and get_user_pages_unlocked 
FAULT_FOLL_ALLOW_RETRY allows the page fault to drop the mmap_sem for
reading to reduce the mmap_sem contention (for writing), like while
waiting for I/O completion.  The problem is that right now practically no
get_user_pages call uses FAULT_FOLL_ALLOW_RETRY, so we're not leveraging
that nifty feature.

Andres fixed it for the KVM page fault.  However get_user_pages_fast
remains uncovered, and 99% of other get_user_pages aren't using it either
(the only exception being FOLL_NOWAIT in KVM which is really nonblocking
and in fact it doesn't even release the mmap_sem).

So this patchsets extends the optimization Andres did in the KVM page
fault to the whole kernel.  It makes most important places (including
gup_fast) to use FAULT_FOLL_ALLOW_RETRY to reduce the mmap_sem hold times
during I/O.

The only few places that remains uncovered are drivers like v4l and other
exceptions that tends to work on their own memory and they're not working
on random user memory (for example like O_DIRECT that uses gup_fast and is
fully covered by this patch).

A follow up patch should probably also add a printk_once warning to
get_user_pages that should go obsolete and be phased out eventually.  The
"vmas" parameter of get_user_pages makes it fundamentally incompatible
with FAULT_FOLL_ALLOW_RETRY (vmas array becomes meaningless the moment the
mmap_sem is released).

While this is just an optimization, this becomes an absolute requirement
for the userfaultfd feature http://lwn.net/Articles/615086/ .

The userfaultfd allows to block the page fault, and in order to do so I
need to drop the mmap_sem first.  So this patch also ensures that all
memory where userfaultfd could be registered by KVM, the very first fault
(no matter if it is a regular page fault, or a get_user_pages) always has
FAULT_FOLL_ALLOW_RETRY set.  Then the userfaultfd blocks and it is waken
only when the pagetable is already mapped.  The second fault attempt after
the wakeup doesn't need FAULT_FOLL_ALLOW_RETRY, so it's ok to retry
without it.

This patch (of 5):

We can leverage the VM_FAULT_RETRY functionality in the page fault paths
better by using either get_user_pages_locked or get_user_pages_unlocked.

The former allows conversion of get_user_pages invocations that will have
to pass a "&locked" parameter to know if the mmap_sem was dropped during
the call.  Example from:

    down_read(&mm->mmap_sem);
    do_something()
    get_user_pages(tsk, mm, ..., pages, NULL);
    up_read(&mm->mmap_sem);

to:

    int locked = 1;
    down_read(&mm->mmap_sem);
    do_something()
    get_user_pages_locked(tsk, mm, ..., pages, &locked);
    if (locked)
        up_read(&mm->mmap_sem);

The latter is suitable only as a drop in replacement of the form:

    down_read(&mm->mmap_sem);
    get_user_pages(tsk, mm, ..., pages, NULL);
    up_read(&mm->mmap_sem);

into:

    get_user_pages_unlocked(tsk, mm, ..., pages);

Where tsk, mm, the intermediate "..." paramters and "pages" can be any
value as before.  Just the last parameter of get_user_pages (vmas) must be
NULL for get_user_pages_locked|unlocked to be usable (the latter original
form wouldn't have been safe anyway if vmas wasn't null, for the former we
just make it explicit by dropping the parameter).

If vmas is not NULL these two methods cannot be used.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com>
Reviewed-by: Peter Feiner <pfeiner@google.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:05 -08:00
Vlastimil Babka
be97a41b29 mm/mempolicy.c: merge alloc_hugepage_vma to alloc_pages_vma 
The previous commit ("mm/thp: Allocate transparent hugepages on local
node") introduced alloc_hugepage_vma() to mm/mempolicy.c to perform a
special policy for THP allocations.  The function has the same interface
as alloc_pages_vma(), shares a lot of boilerplate code and a long
comment.

This patch merges the hugepage special case into alloc_pages_vma.  The
extra if condition should be cheap enough price to pay.  We also prevent
a (however unlikely) race with parallel mems_allowed update, which could
make hugepage allocation restart only within the fallback call to
alloc_hugepage_vma() and not reconsider the special rule in
alloc_hugepage_vma().

Also by making sure mpol_cond_put(pol) is always called before actual
allocation attempt, we can use a single exit path within the function.

Also update the comment for missing node parameter and obsolete reference
to mm_sem.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:04 -08:00
Aneesh Kumar K.V
077fcf116c mm/thp: allocate transparent hugepages on local node 
This make sure that we try to allocate hugepages from local node if
allowed by mempolicy.  If we can't, we fallback to small page allocation
based on mempolicy.  This is based on the observation that allocating
pages on local node is more beneficial than allocating hugepages on remote
node.

With this patch applied we may find transparent huge page allocation
failures if the current node doesn't have enough freee hugepages.  Before
this patch such failures result in us retrying the allocation on other
nodes in the numa node mask.

[akpm@linux-foundation.org: fix comment, add CONFIG_TRANSPARENT_HUGEPAGE dependency]
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:04 -08:00
Joonsoo Kim
24e2716f63 mm/compaction: add tracepoint to observe behaviour of compaction defer 
Compaction deferring logic is heavy hammer that block the way to the
compaction.  It doesn't consider overall system state, so it could prevent
user from doing compaction falsely.  In other words, even if system has
enough range of memory to compact, compaction would be skipped due to
compaction deferring logic.  This patch add new tracepoint to understand
work of deferring logic.  This will also help to check compaction success
and fail.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:04 -08:00
Joonsoo Kim
837d026d56 mm/compaction: more trace to understand when/why compaction start/finish 
It is not well analyzed that when/why compaction start/finish or not.
With these new tracepoints, we can know much more about start/finish
reason of compaction.  I can find following bug with these tracepoint.

http://www.spinics.net/lists/linux-mm/msg81582.html

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:04 -08:00
Joonsoo Kim
e34d85f0e3 mm/compaction: print current range where compaction work 
It'd be useful to know current range where compaction work for detailed
analysis.  With it, we can know pageblock where we actually scan and
isolate, and, how much pages we try in that pageblock and can guess why it
doesn't become freepage with pageblock order roughly.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:04 -08:00
Joonsoo Kim
16c4a097a0 mm/compaction: enhance tracepoint output for compaction begin/end 
We now have tracepoint for begin event of compaction and it prints start
position of both scanners, but, tracepoint for end event of compaction
doesn't print finish position of both scanners.  It'd be also useful to
know finish position of both scanners so this patch add it.  It will help
to find odd behavior or problem on compaction internal logic.

And mode is added to both begin/end tracepoint output, since according to
mode, compaction behavior is quite different.

And lastly, status format is changed to string rather than status number
for readability.

[akpm@linux-foundation.org: fix sparse warning]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:04 -08:00
Joonsoo Kim
4645f06334 mm/compaction: change tracepoint format from decimal to hexadecimal 
To check the range that compaction is working, tracepoint print
start/end pfn of zone and start pfn of both scanner with decimal format.
Since we manage all pages in order of 2 and it is well represented by
hexadecimal, this patch change the tracepoint format from decimal to
hexadecimal.  This would improve readability.  For example, it makes us
easily notice whether current scanner try to compact previously
attempted pageblock or not.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:04 -08:00
Konstantin Khebnikov
8d38633c3b page_writeback: put account_page_redirty() after set_page_dirty() 
Helper account_page_redirty() fixes dirty pages counter for redirtied
pages.  This patch puts it after dirtying and prevents temporary
underflows of dirtied pages counters on zone/bdi and current->nr_dirtied.

Signed-off-by: Konstantin Khebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:04 -08:00
Kirill A. Shutemov
b30fe6c7ce mm: fix false-positive warning on exit due mm_nr_pmds(mm) 
The problem is that we check nr_ptes/nr_pmds in exit_mmap() which happens
*before* pgd_free().  And if an arch does pte/pmd allocation in
pgd_alloc() and frees them in pgd_free() we see offset in counters by the
time of the checks.

We tried to workaround this by offsetting expected counter value according
to FIRST_USER_ADDRESS for both nr_pte and nr_pmd in exit_mmap().  But it
doesn't work in some cases:

1. ARM with LPAE enabled also has non-zero USER_PGTABLES_CEILING, but
   upper addresses occupied with huge pmd entries, so the trick with
   offsetting expected counter value will get really ugly: we will have
   to apply it nr_pmds, but not nr_ptes.

2. Metag has non-zero FIRST_USER_ADDRESS, but doesn't do allocation
   pte/pmd page tables allocation in pgd_alloc(), just setup a pgd entry
   which is allocated at boot and shared accross all processes.

The proposal is to move the check to check_mm() which happens *after*
pgd_free() and do proper accounting during pgd_alloc() and pgd_free()
which would bring counters to zero if nothing leaked.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Tyler Baker <tyler.baker@linaro.org>
Tested-by: Tyler Baker <tyler.baker@linaro.org>
Tested-by: Nishanth Menon <nm@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:04 -08:00
Kirill A. Shutemov
dc6c9a35b6 mm: account pmd page tables to the process 
Dave noticed that unprivileged process can allocate significant amount of
memory -- >500 MiB on x86_64 -- and stay unnoticed by oom-killer and
memory cgroup.  The trick is to allocate a lot of PMD page tables.  Linux
kernel doesn't account PMD tables to the process, only PTE.

The use-cases below use few tricks to allocate a lot of PMD page tables
while keeping VmRSS and VmPTE low.  oom_score for the process will be 0.

	#include <errno.h>
	#include <stdio.h>
	#include <stdlib.h>
	#include <unistd.h>
	#include <sys/mman.h>
	#include <sys/prctl.h>

	#define PUD_SIZE (1UL << 30)
	#define PMD_SIZE (1UL << 21)

	#define NR_PUD 130000

	int main(void)
	{
		char *addr = NULL;
		unsigned long i;

		prctl(PR_SET_THP_DISABLE);
		for (i = 0; i < NR_PUD ; i++) {
			addr = mmap(addr + PUD_SIZE, PUD_SIZE, PROT_WRITE|PROT_READ,
					MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
			if (addr == MAP_FAILED) {
				perror("mmap");
				break;
			}
			*addr = 'x';
			munmap(addr, PMD_SIZE);
			mmap(addr, PMD_SIZE, PROT_WRITE|PROT_READ,
					MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED, -1, 0);
			if (addr == MAP_FAILED)
				perror("re-mmap"), exit(1);
		}
		printf("PID %d consumed %lu KiB in PMD page tables\n",
				getpid(), i * 4096 >> 10);
		return pause();
	}

The patch addresses the issue by account PMD tables to the process the
same way we account PTE.

The main place where PMD tables is accounted is __pmd_alloc() and
free_pmd_range(). But there're few corner cases:

 - HugeTLB can share PMD page tables. The patch handles by accounting
   the table to all processes who share it.

 - x86 PAE pre-allocates few PMD tables on fork.

 - Architectures with FIRST_USER_ADDRESS > 0. We need to adjust sanity
   check on exit(2).

Accounting only happens on configuration where PMD page table's level is
present (PMD is not folded).  As with nr_ptes we use per-mm counter.  The
counter value is used to calculate baseline for badness score by
oom-killer.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: David Rientjes <rientjes@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:04 -08:00
Kirill A. Shutemov
8aa76875dc arm: define __PAGETABLE_PMD_FOLDED for !LPAE 
ARM uses custom implementation of PMD folding in 2-level page table case.
Generic code expects to see __PAGETABLE_PMD_FOLDED to be defined if PMD is
folded, but ARM doesn't do this.  Let's fix it.

Defining __PAGETABLE_PMD_FOLDED will drop out unused __pmd_alloc().  It
also fixes problems with recently-introduced pmd accounting on ARM without
LPAE.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Nishanth Menon <nm@ti.com>
Reported-by: Simon Horman <horms@verge.net.au>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Tested-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Felipe Balbi <balbi@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:04 -08:00
Kirill A. Shutemov
4155b8e0a7 mm, asm-generic: define PUD_SHIFT in <asm-generic/4level-fixup.h> 
If an architecure uses <asm-generic/4level-fixup.h>, build fails if we
try to use PUD_SHIFT in generic code:

   In file included from arch/microblaze/include/asm/bug.h:1:0,
                    from include/linux/bug.h:4,
                    from include/linux/thread_info.h:11,
                    from include/asm-generic/preempt.h:4,
                    from arch/microblaze/include/generated/asm/preempt.h:1,
                    from include/linux/preempt.h:18,
                    from include/linux/spinlock.h:50,
                    from include/linux/mmzone.h:7,
                    from include/linux/gfp.h:5,
                    from include/linux/slab.h:14,
                    from mm/mmap.c:12:
   mm/mmap.c: In function 'exit_mmap':
>> mm/mmap.c:2858:46: error: 'PUD_SHIFT' undeclared (first use in this function)
       round_up(FIRST_USER_ADDRESS, PUD_SIZE) >> PUD_SHIFT);
                                                 ^
   include/asm-generic/bug.h:86:25: note: in definition of macro 'WARN_ON'
     int __ret_warn_on = !!(condition);    \
                            ^
   mm/mmap.c:2858:46: note: each undeclared identifier is reported only once for each function it appears in
       round_up(FIRST_USER_ADDRESS, PUD_SIZE) >> PUD_SHIFT);
                                                 ^
   include/asm-generic/bug.h:86:25: note: in definition of macro 'WARN_ON'
     int __ret_warn_on = !!(condition);    \
                            ^
As with <asm-generic/pgtable-nopud.h>, let's define PUD_SHIFT to
PGDIR_SHIFT.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:03 -08:00
Kirill A. Shutemov
d016bf7ece mm: make FIRST_USER_ADDRESS unsigned long on all archs 
LKP has triggered a compiler warning after my recent patch "mm: account
pmd page tables to the process":

    mm/mmap.c: In function 'exit_mmap':
 >> mm/mmap.c:2857:2: warning: right shift count >= width of type [enabled by default]

The code:

 > 2857                WARN_ON(mm_nr_pmds(mm) >
   2858                                round_up(FIRST_USER_ADDRESS, PUD_SIZE) >> PUD_SHIFT);

In this, on tile, we have FIRST_USER_ADDRESS defined as 0.  round_up() has
the same type -- int.  PUD_SHIFT.

I think the best way to fix it is to define FIRST_USER_ADDRESS as unsigned
long.  On every arch for consistency.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:03 -08:00
Kirill A. Shutemov
3ae3ad4e63 microblaze: define __PAGETABLE_PMD_FOLDED 
Microblaze uses custom implementation of PMD folding, but doesn't define
__PAGETABLE_PMD_FOLDED, which generic code expects to see.  Let's fix it.

Defining __PAGETABLE_PMD_FOLDED will drop out unused __pmd_alloc().  It
also fixes problems with recently-introduced pmd accounting.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:03 -08:00
Johannes Weiner
21afa38eed mm: memcontrol: consolidate swap controller code 
The swap controller code is scattered all over the file.  Gather all
the code that isn't directly needed by the memory controller at the
end of the file in its own CONFIG_MEMCG_SWAP section.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:03 -08:00
Johannes Weiner
95a045f63d mm: memcontrol: consolidate memory controller initialization 
The initialization code for the per-cpu charge stock and the soft
limit tree is compact enough to inline it into mem_cgroup_init().

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:03 -08:00
Johannes Weiner
9c608dbe6a mm: memcontrol: simplify soft limit tree init code 
- No need to test the node for N_MEMORY.  node_online() is enough for
  node fallback to work in slab, use NUMA_NO_NODE for everything else.

- Remove the BUG_ON() for allocation failure.  A NULL pointer crash is
  just as descriptive, and the absent return value check is obvious.

- Move local variables to the inner-most blocks.

- Point to the tree structure after its initialized, not before, it's
  just more logical that way.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:03 -08:00
George G. Davis
94737a85f3 mm: cma: fix totalcma_pages to include DT defined CMA regions 
The totalcma_pages variable is not updated to account for CMA regions
defined via device tree reserved-memory sub-nodes.  Fix this omission by
moving the calculation of totalcma_pages into cma_init_reserved_mem()
instead of cma_declare_contiguous() such that it will include reserved
memory used by all CMA regions.

Signed-off-by: George G. Davis <george_davis@mentor.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:03 -08:00
Michal Hocko
c32b3cbe0d oom, PM: make OOM detection in the freezer path raceless 
Commit 5695be142e ("OOM, PM: OOM killed task shouldn't escape PM
suspend") has left a race window when OOM killer manages to
note_oom_kill after freeze_processes checks the counter.  The race
window is quite small and really unlikely and partial solution deemed
sufficient at the time of submission.

Tejun wasn't happy about this partial solution though and insisted on a
full solution.  That requires the full OOM and freezer's task freezing
exclusion, though.  This is done by this patch which introduces oom_sem
RW lock and turns oom_killer_disable() into a full OOM barrier.

oom_killer_disabled check is moved from the allocation path to the OOM
level and we take oom_sem for reading for both the check and the whole
OOM invocation.

oom_killer_disable() takes oom_sem for writing so it waits for all
currently running OOM killer invocations.  Then it disable all the further
OOMs by setting oom_killer_disabled and checks for any oom victims.
Victims are counted via mark_tsk_oom_victim resp.  unmark_oom_victim.  The
last victim wakes up all waiters enqueued by oom_killer_disable().
Therefore this function acts as the full OOM barrier.

The page fault path is covered now as well although it was assumed to be
safe before.  As per Tejun, "We used to have freezing points deep in file
system code which may be reacheable from page fault." so it would be
better and more robust to not rely on freezing points here.  Same applies
to the memcg OOM killer.

out_of_memory tells the caller whether the OOM was allowed to trigger and
the callers are supposed to handle the situation.  The page allocation
path simply fails the allocation same as before.  The page fault path will
retry the fault (more on that later) and Sysrq OOM trigger will simply
complain to the log.

Normally there wouldn't be any unfrozen user tasks after
try_to_freeze_tasks so the function will not block. But if there was an
OOM killer racing with try_to_freeze_tasks and the OOM victim didn't
finish yet then we have to wait for it. This should complete in a finite
time, though, because

	- the victim cannot loop in the page fault handler (it would die
	  on the way out from the exception)
	- it cannot loop in the page allocator because all the further
	  allocation would fail and __GFP_NOFAIL allocations are not
	  acceptable at this stage
	- it shouldn't be blocked on any locks held by frozen tasks
	  (try_to_freeze expects lockless context) and kernel threads and
	  work queues are not frozen yet

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Suggested-by: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:03 -08:00
Michal Hocko
401e4a7cf6 sysrq: convert printk to pr_* equivalent 
While touching this area let's convert printk to pr_*.  This also makes
the printing of continuation lines done properly.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:03 -08:00
Michal Hocko
35536ae170 PM: convert printk to pr_* equivalent 
While touching this area let's convert printk to pr_*.  This also makes
the printing of continuation lines done properly.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:03 -08:00
Michal Hocko
63a8ca9b20 oom: thaw the OOM victim if it is frozen 
oom_kill_process only sets TIF_MEMDIE flag and sends a signal to the
victim.  This is basically noop when the task is frozen though because the
task sleeps in the uninterruptible sleep.  The victim is eventually thawed
later when oom_scan_process_thread meets the task again in a later OOM
invocation so the OOM killer doesn't live lock.  But this is less than
optimal.

Let's add __thaw_task into mark_tsk_oom_victim after we set TIF_MEMDIE to
the victim.  We are not checking whether the task is frozen because that
would be racy and __thaw_task does that already.  oom_scan_process_thread
doesn't need to care about freezer anymore as TIF_MEMDIE and freezer are
excluded completely now.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:03 -08:00
Michal Hocko
49550b6055 oom: add helpers for setting and clearing TIF_MEMDIE 
This patchset addresses a race which was described in the changelog for
5695be142e ("OOM, PM: OOM killed task shouldn't escape PM suspend"):

: PM freezer relies on having all tasks frozen by the time devices are
: getting frozen so that no task will touch them while they are getting
: frozen.  But OOM killer is allowed to kill an already frozen task in order
: to handle OOM situtation.  In order to protect from late wake ups OOM
: killer is disabled after all tasks are frozen.  This, however, still keeps
: a window open when a killed task didn't manage to die by the time
: freeze_processes finishes.

The original patch hasn't closed the race window completely because that
would require a more complex solution as it can be seen by this patchset.

The primary motivation was to close the race condition between OOM killer
and PM freezer _completely_.  As Tejun pointed out, even though the race
condition is unlikely the harder it would be to debug weird bugs deep in
the PM freezer when the debugging options are reduced considerably.  I can
only speculate what might happen when a task is still runnable
unexpectedly.

On a plus side and as a side effect the oom enable/disable has a better
(full barrier) semantic without polluting hot paths.

I have tested the series in KVM with 100M RAM:
- many small tasks (20M anon mmap) which are triggering OOM continually
- s2ram which resumes automatically is triggered in a loop
	echo processors > /sys/power/pm_test
	while true
	do
		echo mem > /sys/power/state
		sleep 1s
	done
- simple module which allocates and frees 20M in 8K chunks. If it sees
  freezing(current) then it tries another round of allocation before calling
  try_to_freeze
- debugging messages of PM stages and OOM killer enable/disable/fail added
  and unmark_oom_victim is delayed by 1s after it clears TIF_MEMDIE and before
  it wakes up waiters.
- rebased on top of the current mmotm which means some necessary updates
  in mm/oom_kill.c. mark_tsk_oom_victim is now called under task_lock but
  I think this should be OK because __thaw_task shouldn't interfere with any
  locking down wake_up_process. Oleg?

As expected there are no OOM killed tasks after oom is disabled and
allocations requested by the kernel thread are failing after all the tasks
are frozen and OOM disabled.  I wasn't able to catch a race where
oom_killer_disable would really have to wait but I kinda expected the race
is really unlikely.

[  242.609330] Killed process 2992 (mem_eater) total-vm:24412kB, anon-rss:2164kB, file-rss:4kB
[  243.628071] Unmarking 2992 OOM victim. oom_victims: 1
[  243.636072] (elapsed 2.837 seconds) done.
[  243.641985] Trying to disable OOM killer
[  243.643032] Waiting for concurent OOM victims
[  243.644342] OOM killer disabled
[  243.645447] Freezing remaining freezable tasks ... (elapsed 0.005 seconds) done.
[  243.652983] Suspending console(s) (use no_console_suspend to debug)
[  243.903299] kmem_eater: page allocation failure: order:1, mode:0x204010
[...]
[  243.992600] PM: suspend of devices complete after 336.667 msecs
[  243.993264] PM: late suspend of devices complete after 0.660 msecs
[  243.994713] PM: noirq suspend of devices complete after 1.446 msecs
[  243.994717] ACPI: Preparing to enter system sleep state S3
[  243.994795] PM: Saving platform NVS memory
[  243.994796] Disabling non-boot CPUs ...

The first 2 patches are simple cleanups for OOM.  They should go in
regardless the rest IMO.

Patches 3 and 4 are trivial printk -> pr_info conversion and they should
go in ditto.

The main patch is the last one and I would appreciate acks from Tejun and
Rafael.  I think the OOM part should be OK (except for __thaw_task vs.
task_lock where a look from Oleg would appreciated) but I am not so sure I
haven't screwed anything in the freezer code.  I have found several
surprises there.

This patch (of 5):

This patch is just a preparatory and it doesn't introduce any functional
change.

Note:
I am utterly unhappy about lowmemory killer abusing TIF_MEMDIE just to
wait for the oom victim and to prevent from new killing. This is
just a side effect of the flag. The primary meaning is to give the oom
victim access to the memory reserves and that shouldn't be necessary
here.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:03 -08:00
Johannes Weiner
1dfab5abcd mm: memcontrol: fold move_anon() and move_file() 
Turn the move type enum into flags and give the flags field a shorter
name.  Once that is done, move_anon() and move_file() are simple enough to
just fold them into the callsites.

[akpm@linux-foundation.org: tweak MOVE_MASK definition, per Michal]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:02 -08:00
Johannes Weiner
241994ed86 mm: memcontrol: default hierarchy interface for memory 
Introduce the basic control files to account, partition, and limit
memory using cgroups in default hierarchy mode.

This interface versioning allows us to address fundamental design
issues in the existing memory cgroup interface, further explained
below.  The old interface will be maintained indefinitely, but a
clearer model and improved workload performance should encourage
existing users to switch over to the new one eventually.

The control files are thus:

  - memory.current shows the current consumption of the cgroup and its
    descendants, in bytes.

  - memory.low configures the lower end of the cgroup's expected
    memory consumption range.  The kernel considers memory below that
    boundary to be a reserve - the minimum that the workload needs in
    order to make forward progress - and generally avoids reclaiming
    it, unless there is an imminent risk of entering an OOM situation.

  - memory.high configures the upper end of the cgroup's expected
    memory consumption range.  A cgroup whose consumption grows beyond
    this threshold is forced into direct reclaim, to work off the
    excess and to throttle new allocations heavily, but is generally
    allowed to continue and the OOM killer is not invoked.

  - memory.max configures the hard maximum amount of memory that the
    cgroup is allowed to consume before the OOM killer is invoked.

  - memory.events shows event counters that indicate how often the
    cgroup was reclaimed while below memory.low, how often it was
    forced to reclaim excess beyond memory.high, how often it hit
    memory.max, and how often it entered OOM due to memory.max.  This
    allows users to identify configuration problems when observing a
    degradation in workload performance.  An overcommitted system will
    have an increased rate of low boundary breaches, whereas increased
    rates of high limit breaches, maximum hits, or even OOM situations
    will indicate internally overcommitted cgroups.

For existing users of memory cgroups, the following deviations from
the current interface are worth pointing out and explaining:

  - The original lower boundary, the soft limit, is defined as a limit
    that is per default unset.  As a result, the set of cgroups that
    global reclaim prefers is opt-in, rather than opt-out.  The costs
    for optimizing these mostly negative lookups are so high that the
    implementation, despite its enormous size, does not even provide
    the basic desirable behavior.  First off, the soft limit has no
    hierarchical meaning.  All configured groups are organized in a
    global rbtree and treated like equal peers, regardless where they
    are located in the hierarchy.  This makes subtree delegation
    impossible.  Second, the soft limit reclaim pass is so aggressive
    that it not just introduces high allocation latencies into the
    system, but also impacts system performance due to overreclaim, to
    the point where the feature becomes self-defeating.

    The memory.low boundary on the other hand is a top-down allocated
    reserve.  A cgroup enjoys reclaim protection when it and all its
    ancestors are below their low boundaries, which makes delegation
    of subtrees possible.  Secondly, new cgroups have no reserve per
    default and in the common case most cgroups are eligible for the
    preferred reclaim pass.  This allows the new low boundary to be
    efficiently implemented with just a minor addition to the generic
    reclaim code, without the need for out-of-band data structures and
    reclaim passes.  Because the generic reclaim code considers all
    cgroups except for the ones running low in the preferred first
    reclaim pass, overreclaim of individual groups is eliminated as
    well, resulting in much better overall workload performance.

  - The original high boundary, the hard limit, is defined as a strict
    limit that can not budge, even if the OOM killer has to be called.
    But this generally goes against the goal of making the most out of
    the available memory.  The memory consumption of workloads varies
    during runtime, and that requires users to overcommit.  But doing
    that with a strict upper limit requires either a fairly accurate
    prediction of the working set size or adding slack to the limit.
    Since working set size estimation is hard and error prone, and
    getting it wrong results in OOM kills, most users tend to err on
    the side of a looser limit and end up wasting precious resources.

    The memory.high boundary on the other hand can be set much more
    conservatively.  When hit, it throttles allocations by forcing
    them into direct reclaim to work off the excess, but it never
    invokes the OOM killer.  As a result, a high boundary that is
    chosen too aggressively will not terminate the processes, but
    instead it will lead to gradual performance degradation.  The user
    can monitor this and make corrections until the minimal memory
    footprint that still gives acceptable performance is found.

    In extreme cases, with many concurrent allocations and a complete
    breakdown of reclaim progress within the group, the high boundary
    can be exceeded.  But even then it's mostly better to satisfy the
    allocation from the slack available in other groups or the rest of
    the system than killing the group.  Otherwise, memory.max is there
    to limit this type of spillover and ultimately contain buggy or
    even malicious applications.

  - The original control file names are unwieldy and inconsistent in
    many different ways.  For example, the upper boundary hit count is
    exported in the memory.failcnt file, but an OOM event count has to
    be manually counted by listening to memory.oom_control events, and
    lower boundary / soft limit events have to be counted by first
    setting a threshold for that value and then counting those events.
    Also, usage and limit files encode their units in the filename.
    That makes the filenames very long, even though this is not
    information that a user needs to be reminded of every time they
    type out those names.

    To address these naming issues, as well as to signal clearly that
    the new interface carries a new configuration model, the naming
    conventions in it necessarily differ from the old interface.

  - The original limit files indicate the state of an unset limit with
    a very high number, and a configured limit can be unset by echoing
    -1 into those files.  But that very high number is implementation
    and architecture dependent and not very descriptive.  And while -1
    can be understood as an underflow into the highest possible value,
    -2 or -10M etc. do not work, so it's not inconsistent.

    memory.low, memory.high, and memory.max will use the string
    "infinity" to indicate and set the highest possible value.

[akpm@linux-foundation.org: use seq_puts() for basic strings]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2015-02-11 17:06:02 -08:00