Prior to dma unmap/free operations the ism driver tries to ensure
that the memory is no longer accessed by the HW. When errors
during deregistration of memory regions from the HW occur the ism
driver will not unmap/free this memory.
When we receive notification from the hypervisor that a PCI function
has been detached we can no longer access the device and would never
unmap/free these memory regions which led to complaints by the DMA
debug API.
Treat this kind of errors during the deregistration of memory regions
from the HW as success since it is already ensured that the memory
is no longer accessed by HW.
Reported-by: Karsten Graul <kgraul@linux.ibm.com>
Reported-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
When an alternate driver (vfio-ap) has bound an ap queue and this
binding is revised the ap queue device is in an intermittent
state not bound to any driver. The internal state variable
covered this with the state AP_STATE_BORKED which is also used to
reflect broken devices. When now an ap bus scan runs such a
device is destroyed and on the next scan reconstructed.
So a stress test with high frequency switching the queue driver
between the default and the vfio-ap driver hit this gap and the
queue was removed until the next ap bus scan. This fix now
introduces another state for the in-between condition for a queue
momentary not bound to a driver and so the ap bus scan function
skips this device instead of removing it.
Also some very slight but maybe helpful debug feature messages
come with this patch - in particular a message showing that a
broken card/queue device will get removed.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEw9DWbcNiT/aowBjO3s9rk8bwL68FAlxYboYSHGNvaHVja0By
ZWRoYXQuY29tAAoJEN7Pa5PG8C+vNa0P/0XfHrBmrbfUUDLKiHje20fv8uGFiLNy
OxiCeXCqpjmYJD69UQyBtBgHksViYCgbQ1TA8Ia7BEbGrXDt8yixr2jZXQ0LMFfS
ZX1A2uvHnKhEY/yTt6gvH3bX8qB43EEZJBbrXmJGRNcZhV6TVoy51hMpaLaETeLO
3fJ9G2mzV/n/wBrPlyWcbrNW4iRzGzIdA6bWTYSgeKE3S/srMqLnCv8EPwDPhQV0
jfg0RYRgwphPi9OJ2bBuqoWExin2ScVFjW2ld+q3Lxuz5TlIu7zCVttIKqV57ubL
MXDabPREMUI/lkp3TAb7q265Bv6iOkwXyFWDQIkBkwxqlK0tgU1mzXeYlTKCVDnz
BOI1zPdU7ilzHClm9LJ9JZ5QKJCtSIwrxXlshdrItoF0dIpmhoyvQU2JltCTXumM
yCF5iUAvK0NQQPzK1pR/EwGd7ZzqFAWglKoTjN8wHgVxusLpJCCd8j/N9UZ0sjT0
djIdgbredP58xKEOGY1Tpa3C/P6lQTmy5a4xI8e8AmTHW2LuvtzKU9AO4xCswzsb
WRVDhTFtsj5LDBZmpKRHOwMbN755mSDXpUnDKGhXsm63WhaGoezTgq9XaW4UpCb7
FcowLgtw2xlWPil8rhNc6738BKWi5KCtVyOT2jlgH3vhRK/H0QGM5pPRCNY2Mtx7
VtQyUVc70JRH
=8LtS
-----END PGP SIGNATURE-----
Merge tag 'vfio-ccw-20190204' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into features
Pull vfio-ccw from Cornelia Huck with the following changes:
- A fix in ccw chain processing.
There is no need to use void pointers, all drivers are in agreement
about the underlying data structure of the SBAL arrays.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
When trying to calculate the length of a ccw chain, we assume
there are ccws after a TIC. This can lead to overcounting and
copying garbage data from guest memory.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <d63748c1f1b03147bcbf401596638627a5e35ef7.1548082107.git.alifm@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The s390x diagnose 318 instruction sets the control program name code (CPNC)
and control program version code (CPVC) to provide useful information
regarding the OS during debugging. The CPNC is explicitly set to 4 to
indicate a Linux/KVM environment.
The CPVC is a 7-byte value containing:
- 3-byte Linux version code, currently set to 0
- 3-byte unique value, currently set to 0
- 1-byte trailing null
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1544135405-22385-2-git-send-email-walling@linux.ibm.com>
[set version code to 0 until the structure is fully defined]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
We already need to zero out memory for dma_alloc_coherent(), as such
using dma_zalloc_coherent() is superflous. Phase it out.
This change was generated with the following Coccinelle SmPL patch:
@ replace_dma_zalloc_coherent @
expression dev, size, data, handle, flags;
@@
-dma_zalloc_coherent(dev, size, handle, flags)
+dma_alloc_coherent(dev, size, handle, flags)
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
[hch: re-ran the script on the latest tree]
Signed-off-by: Christoph Hellwig <hch@lst.de>
- A larger update for the zcrypt / AP bus code
+ Update two inline assemblies in the zcrypt driver to make gcc happy
+ Add a missing reply code for invalid special commands for zcrypt
+ Allow AP device reset to be triggered from user space
+ Split the AP scan function into smaller, more readable functions
- Updates for vfio-ccw and vfio-ap
+ Add maintainers and reviewer for vfio-ccw
+ Include facility.h in vfio_ap_drv.c to avoid fragile include chain
+ Simplicy vfio-ccw state machine
- Use the common code version of bust_spinlocks
- Make use of the DEFINE_SHOW_ATTRIBUTE
- Fix three incorrect file permissions in the DASD driver
- Remove bit spin-lock from the PCI interrupt handler
- Fix GFP_ATOMIC vs GFP_KERNEL in the PCI code
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJcLGoIAAoJEDjwexyKj9rgyN8IANaQvHbVBA3vz/Ssb6ZiR/K6
rTBoXjJQqyJ/cf6RZeFi1b4Douv4QWJw3s06KXbrdmK/ONm5rypXVfXlAhY71pg5
40BUb92MGXhJw6JFDQ50Udd6Z5r7r6RYR1puyg4tzHmBuNVL7FB5RqFm92UOkMOD
ZI03G1sfA6/1XUKhNfCfNBB6Jt6V+iAAex8bgrp09wAeoGnAO20oFuis9u7pLlNm
a5Cp9n7faXEN+qes1iBtVDr5o7opuhanwWKnhvsYTAbpOo7jGJ/47IPKT2Wfmurd
wkMZBEC+Ntk/IfkaBzp7azeISZD5EbucTcgo/I9nzq/aWeflfXXeYl7My0aQB48=
=Lqrh
-----END PGP SIGNATURE-----
Merge tag 's390-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
- A larger update for the zcrypt / AP bus code:
+ Update two inline assemblies in the zcrypt driver to make gcc happy
+ Add a missing reply code for invalid special commands for zcrypt
+ Allow AP device reset to be triggered from user space
+ Split the AP scan function into smaller, more readable functions
- Updates for vfio-ccw and vfio-ap
+ Add maintainers and reviewer for vfio-ccw
+ Include facility.h in vfio_ap_drv.c to avoid fragile include chain
+ Simplicy vfio-ccw state machine
- Use the common code version of bust_spinlocks
- Make use of the DEFINE_SHOW_ATTRIBUTE
- Fix three incorrect file permissions in the DASD driver
- Remove bit spin-lock from the PCI interrupt handler
- Fix GFP_ATOMIC vs GFP_KERNEL in the PCI code
* tag 's390-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: rework ap scan bus code
s390/zcrypt: make sysfs reset attribute trigger queue reset
s390/pci: fix sleeping in atomic during hotplug
s390/pci: remove bit_lock usage in interrupt handler
s390/drivers: fix proc/debugfs file permissions
s390: convert to DEFINE_SHOW_ATTRIBUTE
MAINTAINERS/vfio-ccw: add Farhan and Eric, make Halil Reviewer
vfio: ccw: Merge BUSY and BOXED states
s390: use common bust_spinlocks()
s390/zcrypt: improve special ap message cmd handling
s390/ap: rework assembler functions to use unions for in/out register variables
s390: vfio-ap: include <asm/facility> for test_facility()
This is mostly update of the usual drivers: smarpqi, lpfc, qedi,
megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas. Additionally, we have
a pile of annotation, unused variable and minor updates. The big API
change is the updates for Christoph's DMA rework which include
removing the DISABLE_CLUSTERING flag. And finally there are a couple
of target tree updates.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXCEUNiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdjKAP9vrTTv
qFaYmAoRSbPq9ZiixaXLMy0K/6o76Uay0gnBqgD/fgn3jg/KQ6alNaCjmfeV3wAj
u1j3H7tha9j1it+4pUw=
=GDa+
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: smarpqi, lpfc, qedi,
megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas.
Additionally, we have a pile of annotation, unused variable and minor
updates.
The big API change is the updates for Christoph's DMA rework which
include removing the DISABLE_CLUSTERING flag.
And finally there are a couple of target tree updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (259 commits)
scsi: isci: request: mark expected switch fall-through
scsi: isci: remote_node_context: mark expected switch fall-throughs
scsi: isci: remote_device: Mark expected switch fall-throughs
scsi: isci: phy: Mark expected switch fall-through
scsi: iscsi: Capture iscsi debug messages using tracepoints
scsi: myrb: Mark expected switch fall-throughs
scsi: megaraid: fix out-of-bound array accesses
scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through
scsi: fcoe: remove set but not used variable 'port'
scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown()
scsi: smartpqi: fix build warnings
scsi: smartpqi: update driver version
scsi: smartpqi: add ofa support
scsi: smartpqi: increase fw status register read timeout
scsi: smartpqi: bump driver version
scsi: smartpqi: add smp_utils support
scsi: smartpqi: correct lun reset issues
scsi: smartpqi: correct volume status
scsi: smartpqi: do not offline disks for transient did no connect conditions
scsi: smartpqi: allow for larger raid maps
...
-----BEGIN PGP SIGNATURE-----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=TRdW
-----END PGP SIGNATURE-----
Merge tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"This is the main pull request for block/storage for 4.21.
Larger than usual, it was a busy round with lots of goodies queued up.
Most notable is the removal of the old IO stack, which has been a long
time coming. No new features for a while, everything coming in this
week has all been fixes for things that were previously merged.
This contains:
- Use atomic counters instead of semaphores for mtip32xx (Arnd)
- Cleanup of the mtip32xx request setup (Christoph)
- Fix for circular locking dependency in loop (Jan, Tetsuo)
- bcache (Coly, Guoju, Shenghui)
* Optimizations for writeback caching
* Various fixes and improvements
- nvme (Chaitanya, Christoph, Sagi, Jay, me, Keith)
* host and target support for NVMe over TCP
* Error log page support
* Support for separate read/write/poll queues
* Much improved polling
* discard OOM fallback
* Tracepoint improvements
- lightnvm (Hans, Hua, Igor, Matias, Javier)
* Igor added packed metadata to pblk. Now drives without metadata
per LBA can be used as well.
* Fix from Geert on uninitialized value on chunk metadata reads.
* Fixes from Hans and Javier to pblk recovery and write path.
* Fix from Hua Su to fix a race condition in the pblk recovery
code.
* Scan optimization added to pblk recovery from Zhoujie.
* Small geometry cleanup from me.
- Conversion of the last few drivers that used the legacy path to
blk-mq (me)
- Removal of legacy IO path in SCSI (me, Christoph)
- Removal of legacy IO stack and schedulers (me)
- Support for much better polling, now without interrupts at all.
blk-mq adds support for multiple queue maps, which enables us to
have a map per type. This in turn enables nvme to have separate
completion queues for polling, which can then be interrupt-less.
Also means we're ready for async polled IO, which is hopefully
coming in the next release.
- Killing of (now) unused block exports (Christoph)
- Unification of the blk-rq-qos and blk-wbt wait handling (Josef)
- Support for zoned testing with null_blk (Masato)
- sx8 conversion to per-host tag sets (Christoph)
- IO priority improvements (Damien)
- mq-deadline zoned fix (Damien)
- Ref count blkcg series (Dennis)
- Lots of blk-mq improvements and speedups (me)
- sbitmap scalability improvements (me)
- Make core inflight IO accounting per-cpu (Mikulas)
- Export timeout setting in sysfs (Weiping)
- Cleanup the direct issue path (Jianchao)
- Export blk-wbt internals in block debugfs for easier debugging
(Ming)
- Lots of other fixes and improvements"
* tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-block: (364 commits)
kyber: use sbitmap add_wait_queue/list_del wait helpers
sbitmap: add helpers for add/del wait queue handling
block: save irq state in blkg_lookup_create()
dm: don't reuse bio for flushes
nvme-pci: trace SQ status on completions
nvme-rdma: implement polling queue map
nvme-fabrics: allow user to pass in nr_poll_queues
nvme-fabrics: allow nvmf_connect_io_queue to poll
nvme-core: optionally poll sync commands
block: make request_to_qc_t public
nvme-tcp: fix spelling mistake "attepmpt" -> "attempt"
nvme-tcp: fix endianess annotations
nvmet-tcp: fix endianess annotations
nvme-pci: refactor nvme_poll_irqdisable to make sparse happy
nvme-pci: only set nr_maps to 2 if poll queues are supported
nvmet: use a macro for default error location
nvmet: fix comparison of a u16 with -1
blk-mq: enable IO poll if .nr_queues of type poll > 0
blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight()
blk-mq: skip zero-queue maps in blk_mq_map_swqueue
...
Most SCSI drivers want to enable "clustering", that is merging of
segments so that they might span more than a single page. Remove the
ENABLE_CLUSTERING define, and require drivers to explicitly set
DISABLE_CLUSTERING to disable this feature.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rework of the AP bus scan code. The ap_scan_bus() function
is large, so this patch splits the code by introducing a new
new function _ap_scan_bus_adapter() which deals with just
one adapter and thus reduces the scan function code complexity.
Now the AP bus scan can handle a type change of an crypto
adapter on the fly (e.g. from CEX5 to CEX6). This may be
the case with newer versions of zVM where the card may
be pure virtual and a type change is just one click.
However a type or function change requires to unregister
all queue devices and the card device and re-register them.
Comments around the AP bus scan code have been added and/or
improved to provide some hopefully useful hints about what
the code is actually doing.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Until now there is no way to reset a AP queue or card. Driving a card
or queue offline and online again does only toggle the 'software'
online state. The only way to trigger a (hardware) reset is by running
hot-unplug/hot-plug for example on the HMC.
This patch makes the queue reset attribute in sysfs writable.
Writing into this attribute triggers a reset on the AP queue's state
machine. So the AP queue is flushed and state machine runs through the
initial states which cause a reset (PQAP(RAPQ)) and a re-registration
to interrupts (PQAP(AQIC)) if available.
The reset sysfs attribute is writable by root only. So only an
administrator is allowed to initiate a reset of AP queues. Please note
that the queue's counter values are left untouched by the reset.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Remove write permissions for fops without a write callback.
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
VFIO_CCW_STATE_BOXED and VFIO_CCW_STATE_BUSY have
identical actions for the same events.
Let's merge both into a single state to simplify the code.
We choose to keep VFIO_CCW_STATE_BUSY.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <1539767923-10539-2-git-send-email-pmorel@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Several conflicts, seemingly all over the place.
I used Stephen Rothwell's sample resolutions for many of these, if not
just to double check my own work, so definitely the credit largely
goes to him.
The NFP conflict consisted of a bug fix (moving operations
past the rhashtable operation) while chaning the initial
argument in the function call in the moved code.
The net/dsa/master.c conflict had to do with a bug fix intermixing of
making dsa_master_set_mtu() static with the fixing of the tagging
attribute location.
cls_flower had a conflict because the dup reject fix from Or
overlapped with the addition of port range classifiction.
__set_phy_supported()'s conflict was relatively easy to resolve
because Andrew fixed it in both trees, so it was just a matter
of taking the net-next copy. Or at least I think it was :-)
Joe Stringer's fix to the handling of netns id 0 in bpf_sk_lookup()
intermixed with changes on how the sdif and caller_net are calculated
in these code paths in net-next.
The remaining BPF conflicts were largely about the addition of the
__bpf_md_ptr stuff in 'net' overlapping with adjustments and additions
to the relevant data structure where the MD pointer macros are used.
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlwNpb0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGwGwH/00UHnXfxww3ixxz
zwTVDzptA6SPm6s84yJOWatM5fXhPiAltZaHSYF9lzRzNU71NCq7Frhq3fQUIXKM
OxqDn9nfSTWcjWTk2q5n2keyRV/KIn67YX7UgqFc1bO/mqtVjEgNWaMyblhI+e9E
giu1ZXayHr43jK1cDOmGExZubXUq7Vsc9TOlrd+d2SwIqeEP7TCMrPhnHDwCNvX2
UU5dtANpVzGtHaBcr37wJj+L8kODCc0f+PQ3g2ar5jTHst5SLlHp2u0AMRnUmgdi
VkGx+mu/uk8mtwUqMIMqhplklVoqK6LTeLqsY5Xt32SKruw9UqyJGdphLjW2QP/g
MkmA1lI=
=7kaD
-----END PGP SIGNATURE-----
Merge tag 'v4.20-rc6' into for-4.21/block
Pull in v4.20-rc6 to resolve the conflict in NVMe, but also to get the
two corruption fixes. We're going to be overhauling the direct dispatch
path, and we need to do that on top of the changes we made for that
in mainline.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Complements
v2.6.35 commit 64deb6efdc ("[SCSI] zfcp: Use status_read_buf_num
provided by FCP channel") which replaced the hardcoded 16 with a
variable value
Also complements already existing fixups for above commit
v2.6.35 commit 8d88cf3f3b ("[SCSI] zfcp: Update status read mempool")
v3.10 commit 9edf7d75ee ("[SCSI] zfcp: status read buffers on first adapter open with link down")
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Suppose adapter (open) recovery is between opened QDIO queues and before
(the end of) initial posting of status read buffers (SRBs). This time
window can be seconds long due to FSF_PROT_HOST_CONNECTION_INITIALIZING
causing by design looping with exponential increase sleeps in the function
performing exchange config data during recovery
[zfcp_erp_adapter_strat_fsf_xconf()]. Recovery triggered by local link up.
Suppose an event occurs for which the FCP channel would send an unsolicited
notification to zfcp by means of a previously posted SRB. We saw it with
local cable pull (link down) in multi-initiator zoning with multiple
NPIV-enabled subchannels of the same shared FCP channel.
As soon as zfcp_erp_adapter_strategy_open_fsf() starts posting the initial
status read buffers from within the adapter's ERP thread, the channel does
send an unsolicited notification.
Since v2.6.27 commit d26ab06ede ("[SCSI] zfcp: receiving an unsolicted
status can lead to I/O stall"), zfcp_fsf_status_read_handler() schedules
adapter->stat_work to re-fill the just consumed SRB from a work item.
Now the ERP thread and the work item post SRBs in parallel. Both contexts
call the helper function zfcp_status_read_refill(). The tracking of
missing (to be posted / re-filled) SRBs is not thread-safe due to separate
atomic_read() and atomic_dec(), in order to depend on posting
success. Hence, both contexts can see
atomic_read(&adapter->stat_miss) == 1. One of the two contexts posts
one too many SRB. Zfcp gets QDIO_ERROR_SLSB_STATE on the output queue
(trace tag "qdireq1") leading to zfcp_erp_adapter_shutdown() in
zfcp_qdio_handler_error().
An obvious and seemingly clean fix would be to schedule stat_work from the
ERP thread and wait for it to finish. This would serialize all SRB
re-fills. However, we already have another work item wait on the ERP
thread: adapter->scan_work runs zfcp_fc_scan_ports() which calls
zfcp_fc_eval_gpn_ft(). The latter calls zfcp_erp_wait() to wait for all the
open port recoveries during zfcp auto port scan, but in fact it waits for
any pending recovery including an adapter recovery. This approach leads to
a deadlock. [see also v3.19 commit 18f87a67e6 ("zfcp: auto port scan
resiliency"); v2.6.37 commit d3e1088d68
("[SCSI] zfcp: No ERP escalation on gpn_ft eval");
v2.6.28 commit fca55b6fb5
("[SCSI] zfcp: fix deadlock between wq triggered port scan and ERP")
fixing v2.6.27 commit c57a39a45a
("[SCSI] zfcp: wait until adapter is finished with ERP during auto-port");
v2.6.27 commit cc8c282963
("[SCSI] zfcp: Automatically attach remote ports")]
Instead make the accounting of missing SRBs atomic for parallel execution
in both the ERP thread and adapter->stat_work.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Fixes: d26ab06ede ("[SCSI] zfcp: receiving an unsolicted status can lead to I/O stall")
Cc: <stable@vger.kernel.org> #2.6.27+
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce separate zfcp module parameters to individually select support
for: DIF which should work (zfcp.dif, which used to be DIF+DIX, disabled)
or DIX+DIF which can cause trouble (zfcp.dix, new, disabled).
If DIX is enabled, we warn on zfcp driver initialization. As before, this
also reduces the maximum I/O request size to half, to support the worst
case of merged single sector requests with one protection data scatter
gather element per sector. This can impact the maximum throughput.
In DIF-only mode (zfcp.dif=1 zfcp.dix=0), we can use the full maximum I/O
request size as there is no protection data for zfcp.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Fedor Loshakov <loshakov@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In order to pass extack together with NETDEV_PRE_UP notifications, it's
necessary to route the extack to __dev_open() from diverse (possibly
indirect) callers. One prominent API through which the notification is
invoked is dev_open().
Therefore extend dev_open() with and extra extack argument and update
all users. Most of the calls end up just encoding NULL, but bond and
team drivers have the extack readily available.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While ccw_io_helper() seems like intended to be exclusive in a sense that
it is supposed to facilitate I/O for at most one thread at any given
time, there is actually nothing ensuring that threads won't pile up at
vcdev->wait_q. If they do, all threads get woken up and see the status
that belongs to some other request than their own. This can lead to bugs.
For an example see:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1788432
This race normally does not cause any problems. The operations provided
by struct virtio_config_ops are usually invoked in a well defined
sequence, normally don't fail, and are normally used quite infrequent
too.
Yet, if some of the these operations are directly triggered via sysfs
attributes, like in the case described by the referenced bug, userspace
is given an opportunity to force races by increasing the frequency of the
given operations.
Let us fix the problem by ensuring, that for each device, we finish
processing the previous request before starting with a new one.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Colin Ian King <colin.king@canonical.com>
Cc: stable@vger.kernel.org
Message-Id: <20180925121309.58524-3-pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently we have a race on vcdev->config in virtio_ccw_get_config() and
in virtio_ccw_set_config().
This normally does not cause problems, as these are usually infrequent
operations. However, for some devices writing to/reading from the config
space can be triggered through sysfs attributes. For these, userspace can
force the race by increasing the frequency.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Cc: stable@vger.kernel.org
Message-Id: <20180925121309.58524-2-pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlwEZdIeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGAlQH/19oax2Za3IPqF4X
DM3lal5M6zlUVkoYstqzpbR3MqUwgEnMfvoeMDC6mI9N4/+r2LkV7cRR8HzqQCCS
jDfD69IzRGb52VSeJmbOrkxBWsR1Nn0t4Z3rEeLPxwaOoNpRc8H973MbAQ2FKMpY
S4Y3jIK1dNiRRxdh52NupVkQF+djAUwkBuVk/rrvRJmTDij4la03cuCDAO+Di9lt
GHlVvygKw2SJhDR+z3ArwZNmE0ceCcE6+W7zPHzj2KeWuKrZg22kfUD454f2YEIw
FG0hu9qecgtpYCkLSm2vr4jQzmpsDoyq3ZfwhjGrP4qtvPC3Db3vL3dbQnkzUcJu
JtwhVCE=
=O1q1
-----END PGP SIGNATURE-----
Merge tag 'v4.20-rc5' into for-4.21/block
Pull in v4.20-rc5, solving a conflict we'll otherwise get in aio.c and
also getting the merge fix that went into mainline that users are
hitting testing for-4.21/block and/or for-next.
* tag 'v4.20-rc5': (664 commits)
Linux 4.20-rc5
PCI: Fix incorrect value returned from pcie_get_speed_cap()
MAINTAINERS: Update linux-mips mailing list address
ocfs2: fix potential use after free
mm/khugepaged: fix the xas_create_range() error path
mm/khugepaged: collapse_shmem() do not crash on Compound
mm/khugepaged: collapse_shmem() without freezing new_page
mm/khugepaged: minor reorderings in collapse_shmem()
mm/khugepaged: collapse_shmem() remember to clear holes
mm/khugepaged: fix crashes due to misaccounted holes
mm/khugepaged: collapse_shmem() stop if punched or truncated
mm/huge_memory: fix lockdep complaint on 32-bit i_size_read()
mm/huge_memory: splitting set mapping+index before unfreeze
mm/huge_memory: rename freeze_page() to unmap_page()
initramfs: clean old path before creating a hardlink
kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace
psi: make disabling/enabling easier for vendor kernels
proc: fixup map_files test on arm
debugobjects: avoid recursive calls with kmemleak
userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set
...
There exist very few ap messages which need to have the 'special' flag
enabled. This flag tells the firmware layer to do some pre- and maybe
postprocessing. However, it may happen that this special flag is
enabled but the firmware is unable to deal with this kind of message
and thus returns with reply code 0x41. For example older firmware may
not know the newest messages triggered by the zcrypt device driver and
thus react with reject and the named reply code. Unfortunately this
reply code is not known to the zcrypt error routines and thus default
behavior is to switch the ap queue offline.
This patch now makes the ap error routine aware of the reply code and
so userspace is informed about the bad processing result but the queue
is not switched to offline state any more.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The driver uses test_facility(), but does not include the
corresponding include file explicitly. The driver currently builds
only thanks to the following include chain:
vfio_ap_drv.c
<linux/module.h>
<linux/elf.h>
<asm/elf.h>
<linux/compat.h>
<asm/uaccess.h>
<asm/facility.h>
Files should not rely on such fragile implicit includes.
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
- Add two missing kfree calls on error paths in the vfio-ccw code
- Make sure that all data structures of a mediated vfio-ccw device are
initialized before registering it
- Fix a sparse warning in vfio-ccw
- A followup patch for the pgtable_bytes accounting, the page table
downgrade for compat processes missed a mm_dec_nr_pmds()
- Reject sampling requests in the PMU init function of the CPU
measurement counter facility
- With the vfio AP driver an AP queue needs to be reset on every device
probe as the alternative driver could have modified the device state
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJb/9clAAoJEDjwexyKj9rgDFIIAMifOGVivY5Dq+PbS2YfVJAS
QVMN6PZEyOZaLHk9rTxIFTAwaZ6i4i0vw01UOiE91VJkDz49wHenDiwaNELtVQrs
57FkzbEuAhjKJ6DaWIr7bWgeaBFUlC+Z4mNxXFaNI2olzNncHhDJME7lPI/XoBvu
zPlWBvliiNiaHAzLBDLw+zx1wyxyYjV+B8ZZ9HtH0xzHm3EOiRWpVsr2TbwePEmd
yC6fTYoDUSJHZF9eoVZaJ0p1wSa8d6NfTE7a5TZOIv7yZQHWo0/tyN0wzyoWb0Oo
7volx9/4BjbP7fBIkBN6LMPDNH8itTmrx6wdhekf+tElBj1iOOi27l8rcyTby00=
=AgxV
-----END PGP SIGNATURE-----
Merge tag 's390-4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
- Add two missing kfree calls on error paths in the vfio-ccw code
- Make sure that all data structures of a mediated vfio-ccw device are
initialized before registering it
- Fix a sparse warning in vfio-ccw
- A followup patch for the pgtable_bytes accounting, the page table
downgrade for compat processes missed a mm_dec_nr_pmds()
- Reject sampling requests in the PMU init function of the CPU
measurement counter facility
- With the vfio AP driver an AP queue needs to be reset on every device
probe as the alternative driver could have modified the device state
* tag 's390-4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: correct pgtable_bytes on page table downgrade
s390/zcrypt: reinit ap queue state machine during device probe
s390/cpum_cf: Reject request for sampling in event initialization
s390/cio: Fix cleanup when unsupported IDA format is used
s390/cio: Fix cleanup of pfn_array alloc failure
vfio: ccw: Register mediated device once all structures are initialized
s390/cio: make vfio_ccw_io_region static
Trivial conflict in net/core/filter.c, a locally computed
'sdif' is now an argument to the function.
Signed-off-by: David S. Miller <davem@davemloft.net>
The response for a SNMP request can consist of multiple parts, which
the cmd callback stages into a kernel buffer until all parts have been
received. If the callback detects that the staging buffer provides
insufficient space, it bails out with error.
This processing is buggy for the first part of the response - while it
initially checks for a length of 'data_len', it later copies an
additional amount of 'offsetof(struct qeth_snmp_cmd, data)' bytes.
Fix the calculation of 'data_len' for the first part of the response.
This also nicely cleans up the memcpy code.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Until the vfio-ap driver came into live there was a well known
agreement about the way how ap devices are initialized and their
states when the driver's probe function is called.
However, the vfio device driver when receiving an ap queue device does
additional resets thereby removing the registration for interrupts for
the ap device done by the ap bus core code. So when later the vfio
driver releases the device and one of the default zcrypt drivers takes
care of the device the interrupt registration needs to get
renewed. The current code does no renew and result is that requests
send into such a queue will never see a reply processed - the
application hangs.
This patch adds a function which resets the aq queue state machine for
the ap queue device and triggers the walk through the initial states
(which are reset and registration for interrupts). This function is
now called before the driver's probe function is invoked.
When the association between driver and device is released, the
driver's remove function is called. The current implementation calls a
ap queue function ap_queue_remove(). This invokation has been moved to
the ap bus function to make the probe / remove pair for ap bus and
drivers more symmetric.
Fixes: 7e0bdbe5c2 ("s390/zcrypt: AP bus support for alternate driver(s)")
Cc: stable@vger.kernel.org # 4.19+
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewd-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewd-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Currently, ccw, vop and remoteproc need some legacy virtio
APIs to create or access virtio rings, which are not supported
by packed ring. So disable packed ring on these transports
for now.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This was introduced with v2.6.27 commit 287ac01acf ("[SCSI] zfcp: Cleanup
code in zfcp_erp.c") but would now suppress helpful -Wswitch compiler
warnings when building with W=1 such as the following forced example:
drivers/s390/scsi/zfcp_erp.c: In function 'zfcp_erp_setup_act':
drivers/s390/scsi/zfcp_erp.c:220:2: warning: enumeration value 'ZFCP_ERP_ACTION_REOPEN_PORT' not handled in switch [-Wswitch]
switch (need) {
^~~~~~
But then again, only with W=1 we would notice unhandled enum cases.
Without the default cases and a missed unhandled enum case, the code might
perform unforeseen things we might not want...
As of today, we never run through the removed default case, so removing it
is no functional change. In the future, we never should run through a
default case but introduce the necessary specific case(s) to handle new
functionality.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This was introduced with v4.18 commit 8c3d20aada ("scsi: zfcp: fix
missing REC trigger trace for all objects in ERP_FAILED") but would now
suppress helpful -Wswitch compiler warnings when building with W=1 such as
the following forced example:
drivers/s390/scsi/zfcp_erp.c: In function 'zfcp_erp_handle_failed':
drivers/s390/scsi/zfcp_erp.c:126:2: warning: enumeration value 'ZFCP_ERP_ACTION_REOPEN_PORT_FORCED' not handled in switch [-Wswitch]
switch (want) {
^~~~~~
But then again, only with W=1 we would notice unhandled enum cases.
Without the default cases and a missed unhandled enum case, the code might
perform unforeseen things we might not want...
As of today, we never run through the removed default case, so removing it
is no functional change. In the future, we never should run through a
default case but introduce the necessary specific case(s) to handle new
functionality.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For some reason the already existing substring "fall through" in the
comment is not sufficient for GCC to silence -Wimplicit-fallthrough.
CC [M] drivers/s390/scsi/zfcp_erp.o
drivers/s390/scsi/zfcp_erp.c: In function 'zfcp_erp_lun_strategy':
drivers/s390/scsi/zfcp_erp.c:1065:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (atomic_read(&zfcp_sdev->status) & ZFCP_STATUS_COMMON_OPEN)
^
drivers/s390/scsi/zfcp_erp.c:1068:2: note: here
case ZFCP_ERP_STEP_LUN_CLOSING:
^~~~
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Improve whatever the following simple invocation reported:
$ ./scripts/kernel-doc -none drivers/s390/scsi/*.h
While at it, improve some related kdoc,
including struct zfcp_fsf_ct_els in zfcp_fsf.h.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While at it also improve some copy & paste kdoc mistakes.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
zfcp: <devbusid>: LUN 0x0 on port 0x5005076......... ...
zfcp: <devbusid>: LUN 0x1000000000000 on port 0x5005076......... ...
should be
zfcp: <devbusid>: LUN 0x0000000000000000 on port 0x5005076......... ...
zfcp: <devbusid>: LUN 0x0001000000000000 on port 0x5005076.........
is already in use by CSS., MIF Image ID .
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
With that instead of just "int" it becomes clear which functions return
this type and which ones also accept it as argument they just pass through
in some cases or modify in other cases. v2.6.27 commit 287ac01acf
("[SCSI] zfcp: Cleanup code in zfcp_erp.c") introduced the enum which was
cpp defines previously.
Silence some false -Wswitch compiler warning cases with individual
NOP cases. When adding more enum values and building with W=1 we
would get compiler warnings about missed new cases.
Consistently use the variable name "result", so change "retval" in
zfcp_erp_strategy() to "result". This avoids confusion with other compile
unit variables "retval" having different semantics and type.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the already defined enum for this purpose to get at least some build
checking (even though an enum is type equivalent to an int in C). v2.6.27
commit 287ac01acf ("[SCSI] zfcp: Cleanup code in zfcp_erp.c") introduced
the enum which was cpp defines previously.
Since struct zfcp_erp_action type is embedded into other structures living
in zfcp_def.h, we have to move enum zfcp_erp_act_type from its private
definition in zfcp_erp.c to the zfcp-global zfcp_def.h
Silence some false -Wswitch compiler warning cases with individual NOP
cases. When adding more enum values and building with W=1 we would get
compiler warnings about missed new cases.
Add missing break statements in some of the above switch cases. No
functional change, but making it future-proof. I think all of these should
have had a break statement ever since, even if these switch cases happened
to be the last ones in the switch statement body.
"Fall through" in the context of switch case usually means not to have a
break and fall through to the subsequent switch case. However, I think this
old comment meant that here we do not have an _early return_ in the switch
case but the code path continues after the switch case body.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
&zfcp_erp_action.action ==> &zfcp_erp_action.type
While at it, make use of the already defined enum for this purpose to get
at least some build checking (even though an enum is type equivalent to an
int in C). v2.6.27 commit 287ac01acf ("[SCSI] zfcp: Cleanup code in
zfcp_erp.c") introduced the enum which was cpp defines previously.
To prevent compiler warnings with the switch(act->type), we have to
separate the recently added eyecatchers from enum zfcp_erp_act_type.
Since struct zfcp_erp_action type is embedded into other structures living
in zfcp_def.h, we have to move enum zfcp_erp_act_type from its private
definition in zfcp_erp.c to the zfcp-global zfcp_def.h.
Silence one false -Wswitch compiler warning case: LUNs as the leaves in our
object tree do not have any follow-up success recovery.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
v2.6.30 commit 5ffd51a5e4 ("[SCSI] zfcp: replace current ERP logging with
a more convenient version") changed trace record distinguishing from a
numerical ID to a 7 character string called "trace tag". While starting to
use function arguments with different type and semantics, it did not change
the argument name accordingly.
v2.6.38 commit ae0904f60f ("[SCSI] zfcp: Redesign of the debug tracing
for recovery actions.") renamed variable names "id" into "tag" but only
within zfcp_dbf.*, not within zfcp_erp.c.
This was a bit confusing since the remainder of zfcp does use the term
"trace tag". Also "id" is quite generic and it's not obvious for what.
Just unify it consistently and use the "dbf" prefix to relate the arguments
to the code in zfcp_dbf.*.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
zfcp_erp_thread_setup() update complements v2.6.32 commit 347c6a965d
("[SCSI] zfcp: Use kthread API for zfcp erp thread").
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The CDB is just a part inside of FCP_CMND, see zfcp_fc_scsi_to_fcp().
While at it, fix the device driver reaction: adapter not LUN shutdown.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is no point for double bookkeeping especially just for tracing. The
trace can take it from the QTCB which always exists for non-SRB responses
traced with zfcp_dbf_hba_fsf_res().
As a side effect, this removes an alignment hole and reduces the size of
struct zfcp_fsf_req, and thus of each pending request, by 8 bytes.
Before:
$ pahole -C zfcp_fsf_req drivers/s390/scsi/zfcp.ko
...
struct fsf_qtcb * qtcb; /* 144 8 */
u32 seq_no; /* 152 4 */
/* XXX 4 bytes hole, try to pack */
void * data; /* 160 8 */
...
/* size: 296, cachelines: 2, members: 14 */
/* sum members: 288, holes: 2, sum holes: 8 */
/* last cacheline: 40 bytes */
After:
$ pahole -C zfcp_fsf_req drivers/s390/scsi/zfcp.ko
...
struct fsf_qtcb * qtcb; /* 144 8 */
void * data; /* 152 8 */
...
/* size: 288, cachelines: 2, members: 13 */
/* sum members: 284, holes: 1, sum holes: 4 */
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Status read buffers (SRBs, unsolicited notifications) never use a QTCB
[zfcp_fsf_req_create()]. zfcp_fsf_req_send() already uses this to
distinguish SRBs from other FSF request types. We can re-use this method in
zfcp_fsf_req_complete(). Introduce a helper function to make the check for
req->qtcb less magic.
SRBs always are FSF_QTCB_UNSOLICITED_STATUS, so we can hard-code this for
the two trace functions dealing with SRBs.
All other FSF request types have a QTCB and we can get the fsf_command from
there.
zfcp_dbf_hba_fsf_response() and thus zfcp_dbf_hba_fsf_res() are only called
for non-SRB requests so it's safe to dereference the QTCB
[zfcp_fsf_req_complete() returns early on SRB, else calls
zfcp_fsf_protstatus_eval() which calls zfcp_dbf_hba_fsf_response()]. In
zfcp_scsi_forget_cmnd() we guard the QTCB dereference with a preceding NULL
check and rely on boolean shortcut evaluation.
As a side effect, this causes an alignment hole which we can close in
a later patch after having cleaned up all fields of struct zfcp_fsf_req.
Before:
$ pahole -C zfcp_fsf_req drivers/s390/scsi/zfcp.ko
...
u32 status; /* 136 4 */
u32 fsf_command; /* 140 4 */
struct fsf_qtcb * qtcb; /* 144 8 */
...
After:
$ pahole -C zfcp_fsf_req drivers/s390/scsi/zfcp.ko
...
u32 status; /* 136 4 */
/* XXX 4 bytes hole, try to pack */
struct fsf_qtcb * qtcb; /* 144 8 */
...
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Have structures just before the structures that use them (without
disrupting sequences of using structures such as zfcp_unit and
zfcp_scsi_dev):
- zfcp_adapter_mempool embedded in zfcp_adapter,
- zfcp_latenc... embedded in zfcp_scsi_dev.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
