Need to set the dte flag on this asic.
Port the fix from amdgpu:
5cb818b861 ("drm/amd/amdgpu: fix si_enable_smc_cac() failed issue")
Reviewed-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The reference to object fence is dropped at the end of the loop.
However, it is dropped again outside the loop. The reference can be
dropped immediately after calling dma_fence_wait() in the loop and
thus the dropping operation outside the loop can be removed.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The object fence is not set to NULL after its reference is dropped. As a
result, its reference may be dropped again if error occurs after that,
which may lead to a use after free bug. To avoid the issue, fence is
explicitly set to NULL after dropping its reference.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Using unified VBIOS has performance drop in sriov environment.
The fix is switching to another register instead.
Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It needs to add warning to update firmware in gfx9
in case that firmware is too old to have function to
realize dummy read in cp firmware.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The GRBM register interface is now capable of bursting 1 cycle per
register wr->wr, wr->rd much faster than previous muticycle per
transaction done interface. This has caused a problem where
status registers requiring HW to update have a 1 cycle delay, due
to the register update having to go through GRBM.
For cp ucode, it has realized dummy read in cp firmware.It covers
the use of WAIT_REG_MEM operation 1 case only.So it needs to call
gfx_v10_0_wait_reg_mem in gfx10. Besides it also needs to add warning to
update firmware in case firmware is too old to have function to realize
dummy read in cp firmware.
For sdma ucode, it hasn't realized dummy read in sdma firmware. sdma is
moved to gfxhub in gfx10. So it needs to add dummy read in driver
between amdgpu_ring_emit_wreg and amdgpu_ring_emit_reg_wait for sdma_v5_0.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu_enable_umd_pstate() will try to get the smu->mutex which was already
hold by its parent API smu_force_performance_level() on the call path.
Thus deadlock happens.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
P-state switch should be performed after all devices from the hive
get initialized.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Jonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added lock protection so that the p-state switch will
be guarded to be sequential. Also update the hive
pstate only all device from the hive are in the same
state.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise, the feature enablement will be skipped due to wrong count.
Fixes: beff74bc6e ("drm/amdgpu: fix a race in GPU reset with IB test (v2)")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix workload bit (WORKLOAD_PPLIB_COMPUTE_BIT) map error
on vega20 and navi asic.
fix commit:
drm/amd/powerplay: add function get_workload_type_map for swsmu
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To fit the latest SMU firmware.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Direct uploading save/restore list via mmio register writes breaks the security
policy. Instead, the driver should pass s&r list to psp.
For all the ASICs that use rlc v2_1 headers, the driver actually upload s&r list
twice, in non-psp ucode front door loading phase and gfx pg initialization phase.
The latter is not allowed.
VG12 is the only exception where the driver still keeps legacy approach for S&R
list uploading. In theory, this can be elimnated if we have valid srcntl ucode
for VG12.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Candice Li <Candice.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix a static code checker warning.
v2: Drop PTR_ERR_OR_ZERO.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When unloading driver, need to free discovery memory.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we know where the tables came from.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 967a3b85ba.
Reason for revert: Root cause of this issue is found. The workaround is not needed anymore.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Navi10 has 6 PHY, but Navi14 only has 5 PHY, that is
because there is no ENGINE_ID_DIGD in Navi14. Without
this patch, many HDMI related issues (e.g. HDMI S3
resume failure, HDMI pink screen on boot) will be
observed.
[How]
If "eng_id" is larger than ENGINE_ID_DIGD, then
add "eng_id" by 1.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Neil Mayhew <neil@neil.mayhew.name>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To better clarify what is happening in this function.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's safe to enable dynamic VCN powergating on raven and
raven2 for increased power savings.
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add xgmi pstate setting on powerplay routine.
V2: split the change of is_support_sw_smu_xgmi into a separate patch
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add check for is_sw_smu routine and drop check
for amdgpu_dpm which seems non-sense.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pstate settings should be performed after all device of the
XGMI setup get initialized.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The HID descriptors for most Wacom devices oddly declare the serial
number and other related fields as signed integers. When these numbers
are ingested by the HID subsystem, they are automatically sign-extended
into 32-bit integers. We treat the fields as unsigned elsewhere in the
kernel and userspace, however, so this sign-extension causes problems.
In particular, the sign-extended tool ID sent to userspace as ABS_MISC
does not properly match unsigned IDs used by xf86-input-wacom and libwacom.
We introduce a function 'wacom_s32tou' that can undo the automatic sign
extension performed by 'hid_snto32'. We call this function when processing
the serial number and related fields to ensure that we are dealing with
and reporting the unsigned form. We opt to use this method rather than
adding a descriptor fixup in 'wacom_hid_usage_quirk' since it should be
more robust in the face of future devices.
Ref: https://github.com/linuxwacom/input-wacom/issues/134
Fixes: f85c9dc678 ("HID: wacom: generic: Support tool ID and additional tool types")
CC: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This reverts commit 385857adb8.
Reason for revert: Root cause of this issue is found. The workaround is not needed anymore.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Navi10 has 6 PHY, but Navi14 only has 5 PHY, that is
because there is no ENGINE_ID_DIGD in Navi14. Without
this patch, many HDMI related issues (e.g. HDMI S3
resume failure, HDMI pink screen on boot) will be
observed.
[How]
If "eng_id" is larger than ENGINE_ID_DIGD, then
add "eng_id" by 1.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
doing kthread_park()/unpark() from drm_sched_entity_fini
while GPU reset is in progress defeats all the purpose of
drm_sched_stop->kthread_park.
If drm_sched_entity_fini->kthread_unpark() happens AFTER
drm_sched_stop->kthread_park nothing prevents from another
(third) thread to keep submitting job to HW which will be
picked up by the unparked scheduler thread and try to submit
to HW but fail because the HW ring is deactivated.
[How]
grab the reset lock before calling drm_sched_entity_fini()
Signed-off-by: Shirish S <shirish.s@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These were not aligned for optimal performance for GPUVM.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change rem_nsec to u32 since that's what do_div returns, this avoids the
u64 divide in the drm_print args.
Changes in v2:
- Instead of doing do_div in drm_print, make rem_nsec u32 (Ville)
Link to v1: https://patchwork.freedesktop.org/patch/msgid/20191106173622.15573-1-sean@poorly.run
Fixes: 12a280c728 ("drm/dp_mst: Add topology ref history tracking for debugging")
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106194121.164458-1-sean@poorly.run
Merge more fixes from Andrew Morton:
"17 fixes"
Mostly mm fixes and one ocfs2 locking fix.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: memcontrol: fix network errors from failing __GFP_ATOMIC charges
mm/memory_hotplug: fix updating the node span
scripts/gdb: fix debugging modules compiled with hot/cold partitioning
mm: slab: make page_cgroup_ino() to recognize non-compound slab pages properly
MAINTAINERS: update information for "MEMORY MANAGEMENT"
dump_stack: avoid the livelock of the dump_lock
zswap: add Vitaly to the maintainers list
mm/page_alloc.c: ratelimit allocation failure warnings more aggressively
mm/khugepaged: fix might_sleep() warn with CONFIG_HIGHPTE=y
mm, vmstat: reduce zone->lock holding time by /proc/pagetypeinfo
mm, vmstat: hide /proc/pagetypeinfo from normal users
mm/mmu_notifiers: use the right return code for WARN_ON
ocfs2: protect extent tree in ocfs2_prepare_inode_for_write()
mm: thp: handle page cache THP correctly in PageTransCompoundMap
mm, meminit: recalculate pcpu batch and high limits after init completes
mm/gup_benchmark: fix MAP_HUGETLB case
mm: memcontrol: fix NULL-ptr deref in percpu stats flush
Following commit 73e86cb03c ("arm64: Move PTE_RDONLY bit handling out
of set_pte_at()"), the PTE_RDONLY bit is no longer managed by
set_pte_at() but built into the PAGE_* attribute definitions.
Consequently, pte_same() must include this bit when checking two PTEs
for equality.
Remove the arm64-specific pte_same() function, practically reverting
commit 747a70e60b ("arm64: Fix copy-on-write referencing in HugeTLB")
Fixes: 73e86cb03c ("arm64: Move PTE_RDONLY bit handling out of set_pte_at()")
Cc: <stable@vger.kernel.org> # 4.14.x-
Cc: Will Deacon <will@kernel.org>
Cc: Steve Capper <steve.capper@arm.com>
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
[Why]
doing kthread_park()/unpark() from drm_sched_entity_fini
while GPU reset is in progress defeats all the purpose of
drm_sched_stop->kthread_park.
If drm_sched_entity_fini->kthread_unpark() happens AFTER
drm_sched_stop->kthread_park nothing prevents from another
(third) thread to keep submitting job to HW which will be
picked up by the unparked scheduler thread and try to submit
to HW but fail because the HW ring is deactivated.
[How]
grab the reset lock before calling drm_sched_entity_fini()
Signed-off-by: Shirish S <shirish.s@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These were not aligned for optimal performance for GPUVM.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Doug Berger says:
====================
net: bcmgenet: restore internal EPHY support (part 2)
This is a follow up to my previous submission (see [1]).
The first commit provides what is intended to be a complete solution
for the issues that can result from insufficient clocking of the MAC
during reset of its state machines. It should be backported to the
stable releases.
It is intended to replace the partial solution of commit 1f51548627
("net: bcmgenet: soft reset 40nm EPHYs before MAC init") which is
reverted by the second commit of this series and should not be back-
ported as noted in [2].
The third commit corrects a timing hazard with a polled PHY that can
occur when the MAC resumes and also when a v3 internal EPHY is reset
by the change in commit 25382b991d ("net: bcmgenet: reset 40nm EPHY
on energy detect"). It is expected that commit 25382b991d be back-
ported to stable first before backporting this commit.
[1] https://lkml.org/lkml/2019/10/16/1706
[2] https://lkml.org/lkml/2019/10/31/749
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The phy_init_hw() function may reset the PHY to a configuration
that does not match manual network settings stored in the phydev
structure. If the phy state machine is polled rather than event
driven this can create a timing hazard where the phy state machine
might alter the settings stored in the phydev structure from the
value read from the BMCR.
This commit follows invocations of phy_init_hw() by the bcmgenet
driver with invocations of the genphy_config_aneg() function to
ensure that the BMCR is written to match the settings held in the
phydev structure. This prevents the risk of manual settings being
accidentally altered.
Fixes: 1c1008c793 ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 1f51548627.
This commit improved the chances of the umac resetting cleanly by
ensuring that the PHY was restored to its normal operation prior
to resetting the umac. However, there were still cases when the
PHY might not be driving a Tx clock to the umac during this window
(e.g. when the PHY detects no link).
The previous commit now ensures that the unimac receives clocks
from the MAC during its reset window so this commit is no longer
needed. This commit also has an unintended negative impact on the
MDIO performance of the UniMAC MDIO interface because it is used
before the MDIO interrupts are reenabled, so it should be removed.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As noted in commit 28c2d1a7a0 ("net: bcmgenet: enable loopback
during UniMAC sw_reset") the UniMAC must be clocked while sw_reset
is asserted for its state machines to reset cleanly.
The transmit and receive clocks used by the UniMAC are derived from
the signals used on its PHY interface. The bcmgenet MAC can be
configured to work with different PHY interfaces including MII,
GMII, RGMII, and Reverse MII on internal and external interfaces.
Unfortunately for the UniMAC, when configured for MII the Tx clock
is always driven from the PHY which places it outside of the direct
control of the MAC.
The earlier commit enabled a local loopback mode within the UniMAC
so that the receive clock would be derived from the transmit clock
which addressed the observed issue with an external GPHY disabling
it's Rx clock. However, when a Tx clock is not available this
loopback is insufficient.
This commit implements a workaround that leverages the fact that
the MAC can reliably generate all of its necessary clocking by
enterring the external GPHY RGMII interface mode with the UniMAC in
local loopback during the sw_reset interval. Unfortunately, this
has the undesirable side efect of the RGMII GTXCLK signal being
driven during the same window.
In most configurations this is a benign side effect as the signal
is either not routed to a pin or is already expected to drive the
pin. The one exception is when an external MII PHY is expected to
drive the same pin with its TX_CLK output creating output driver
contention.
This commit exploits the IEEE 802.3 clause 22 standard defined
isolate mode to force an external MII PHY to present a high
impedance on its TX_CLK output during the window to prevent any
contention at the pin.
The MII interface is used internally with the 40nm internal EPHY
which agressively disables its clocks for power savings leading to
incomplete resets of the UniMAC and many instabilities observed
over the years. The workaround of this commit is expected to put
an end to those problems.
Fixes: 1c1008c793 ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
perf report/top:
Jiri Olsa:
- Fix time sorting for big numbers, i.e.:
perf report -s time -F time,overhead --stdio
was failing because the sort comparision routine was returning 'int' while
that particular -s key was int64_t, fix it.
perf scripting engines:
Steven Rostedt (VMware):
- Iterate on tep event arrays directly, fixing a bug when generating python/perl
source code from a perf.data file with more than one tracepoint event.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXcGdpgAKCRCyPKLppCJ+
JwoXAQDeac29fMxv3fHcmkxjQnt5M0f3GV14+bT8qmUZhDgi0QD8DzVpa1iKF+cC
N26yDNU0zcj6Rs6WUWlBgyXfvrS4JQs=
=fbXe
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-5.4-20191105' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf fixes from Arnaldo Carvalho de Melo:
perf report/top:
Jiri Olsa:
- Fix time sorting for big numbers, i.e.:
perf report -s time -F time,overhead --stdio
was failing because the sort comparision routine was returning 'int' while
that particular -s key was int64_t, fix it.
perf scripting engines:
Steven Rostedt (VMware):
- Iterate on tep event arrays directly, fixing a bug when generating python/perl
source code from a perf.data file with more than one tracepoint event.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
drm_self_refresh_helper_update_avg_times() was incorrectly accessing the
new incoming state after drm_atomic_helper_commit_hw_done(). But this
state might have already been superceeded by an !nonblock atomic update
resulting in dereferencing an already free'd crtc_state.
TODO I *think* this will more or less do the right thing.. althought I'm
not 100% sure if, for example, we enter psr in a nonblock commit, and
then leave psr in a !nonblock commit that overtakes the completion of
the nonblock commit. Not sure if this sort of scenario can happen in
practice. But not crashing is better than crashing, so I guess we
should either take this patch or rever the self-refresh helpers until
Sean can figure out a better solution.
Fixes: d4da4e3334 ("drm: Measure Self Refresh Entry/Exit times to avoid thrashing")
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
[seanpaul fixed up some checkpatch warns]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104173737.142558-1-robdclark@gmail.com
Fix the cx debugbus related register configuration, to collect accurate
bus data during gpu snapshot. This helps with complete snapshot dump
and also complete proper GPU recovery.
Fixes: 1707add815 ("drm/msm/a6xx: Add a6xx gpu state")
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/339165
The clean up commit 41672c0c24 ("ALSA: timer: Simplify error path in
snd_timer_open()") unified the error handling code paths with the
standard goto, but it introduced a subtle bug: the timer instance is
stored in snd_timer_open() incorrectly even if it returns an error.
This may eventually lead to UAF, as spotted by fuzzer.
The culprit is the snd_timer_open() code checks the
SNDRV_TIMER_IFLG_EXCLUSIVE flag with the common variable timeri.
This variable is supposed to be the newly created instance, but we
(ab-)used it for a temporary check before the actual creation of a
timer instance. After that point, there is another check for the max
number of instances, and it bails out if over the threshold. Before
the refactoring above, it worked fine because the code returned
directly from that point. After the refactoring, however, it jumps to
the unified error path that stores the timeri variable in return --
even if it returns an error. Unfortunately this stored value is kept
in the caller side (snd_timer_user_tselect()) in tu->timeri. This
causes inconsistency later, as if the timer was successfully
assigned.
In this patch, we fix it by not re-using timeri variable but a
temporary variable for testing the exclusive connection, so timeri
remains NULL at that point.
Fixes: 41672c0c24 ("ALSA: timer: Simplify error path in snd_timer_open()")
Reported-and-tested-by: Tristan Madani <tristmd@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191106165547.23518-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While upgrading from 4.16 to 5.2, we noticed these allocation errors in
the log of the new kernel:
SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)
cache: tw_sock_TCPv6(960:helper-logs), object size: 232, buffer size: 240, default order: 1, min order: 0
node 0: slabs: 5, objs: 170, free: 0
slab_out_of_memory+1
___slab_alloc+969
__slab_alloc+14
kmem_cache_alloc+346
inet_twsk_alloc+60
tcp_time_wait+46
tcp_fin+206
tcp_data_queue+2034
tcp_rcv_state_process+784
tcp_v6_do_rcv+405
__release_sock+118
tcp_close+385
inet_release+46
__sock_release+55
sock_close+17
__fput+170
task_work_run+127
exit_to_usermode_loop+191
do_syscall_64+212
entry_SYSCALL_64_after_hwframe+68
accompanied by an increase in machines going completely radio silent
under memory pressure.
One thing that changed since 4.16 is e699e2c6a6 ("net, mm: account
sock objects to kmemcg"), which made these slab caches subject to cgroup
memory accounting and control.
The problem with that is that cgroups, unlike the page allocator, do not
maintain dedicated atomic reserves. As a cgroup's usage hovers at its
limit, atomic allocations - such as done during network rx - can fail
consistently for extended periods of time. The kernel is not able to
operate under these conditions.
We don't want to revert the culprit patch, because it indeed tracks a
potentially substantial amount of memory used by a cgroup.
We also don't want to implement dedicated atomic reserves for cgroups.
There is no point in keeping a fixed margin of unused bytes in the
cgroup's memory budget to accomodate a consumer that is impossible to
predict - we'd be wasting memory and get into configuration headaches,
not unlike what we have going with min_free_kbytes. We do this for
physical mem because we have to, but cgroups are an accounting game.
Instead, account these privileged allocations to the cgroup, but let
them bypass the configured limit if they have to. This way, we get the
benefits of accounting the consumed memory and have it exert pressure on
the rest of the cgroup, but like with the page allocator, we shift the
burden of reclaimining on behalf of atomic allocations onto the regular
allocations that can block.
Link: http://lkml.kernel.org/r/20191022233708.365764-1-hannes@cmpxchg.org
Fixes: e699e2c6a6 ("net, mm: account sock objects to kmemcg")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org> [4.18+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We recently started updating the node span based on the zone span to
avoid touching uninitialized memmaps.
Currently, we will always detect the node span to start at 0, meaning a
node can easily span too many pages. pgdat_is_empty() will still work
correctly if all zones span no pages. We should skip over all zones
without spanned pages and properly handle the first detected zone that
spans pages.
Unfortunately, in contrast to the zone span (/proc/zoneinfo), the node
span cannot easily be inspected and tested. The node span gives no real
guarantees when an architecture supports memory hotplug, meaning it can
easily contain holes or span pages of different nodes.
The node span is not really used after init on architectures that
support memory hotplug.
E.g., we use it in mm/memory_hotplug.c:try_offline_node() and in
mm/kmemleak.c:kmemleak_scan(). These users seem to be fine.
Link: http://lkml.kernel.org/r/20191027222714.5313-1-david@redhat.com
Fixes: 00d6c019b5 ("mm/memory_hotplug: don't access uninitialized memmaps in shrink_pgdat_span()")
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gcc's -freorder-blocks-and-partition option makes it group frequently
and infrequently used code in .text.hot and .text.unlikely sections
respectively. At least when building modules on s390, this option is
used by default.
gdb assumes that all code is located in .text section, and that .text
section is located at module load address. With such modules this is no
longer the case: there is code in .text.hot and .text.unlikely, and
either of them might precede .text.
Fix by explicitly telling gdb the addresses of code sections.
It might be tempting to do this for all sections, not only the ones in
the white list. Unfortunately, gdb appears to have an issue, when
telling it about e.g. loadable .note.gnu.build-id section causes it to
think that non-loadable .note.Linux section is loaded at address 0,
which in turn causes NULL pointers to be resolved to bogus symbols. So
keep using the white list approach for the time being.
Link: http://lkml.kernel.org/r/20191028152734.13065-1-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
