Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public licence as published by
the free software foundation either version 2 of the licence or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 114 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170857.552531963@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that no driver code is using mmiowb() directly, remove the dummy
definitions remaining in architectures that don't make use of
asm-generic/io.h, as well as the definition in asm-generic/io.h itself.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Removing explicit calls to mmiowb() from driver code means that we must
now call into the generic mmiowb_spin_{lock,unlock}() functions from the
core spinlock code. In order to elide barriers following critical
sections without any I/O writes, we also hook into the asm-generic I/O
routines.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The inX() and readX() I/O accessors must enforce ordering against
subsequent calls to the delay() routines, so that a read-back from a
device can be used to postpone a subsequent write to the same device.
On some architectures, including arm64, this ordering can only be
achieved by creating a dependency on the value returned by the I/O
accessor operation, so we need to pass the value we read to the
__io_par() and __io_ar() macros in these cases.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The !CONFIG_GENERIC_IOMAP version of ioport_map uses MMIO_UPPER_LIMIT to
prevent users from making I/O accesses outside the expected I/O range -
however it erroneously treats MMIO_UPPER_LIMIT as a mask which is
contradictory to its other users.
The introduction of CONFIG_INDIRECT_PIO, which subtracts an arbitrary
amount from IO_SPACE_LIMIT to form MMIO_UPPER_LIMIT, results in ioport_map
mangling the given port rather than capping it.
We address this by aligning more closely with the CONFIG_GENERIC_IOMAP
implementation of ioport_map by using the comparison operator and
returning NULL where the port exceeds MMIO_UPPER_LIMIT. Though note that
we preserve the existing behavior of masking with IO_SPACE_LIMIT such that
we don't break existing buggy drivers that somehow rely on this masking.
Fixes: 5745392e0c ("PCI: Apply the new generic I/O management on PCI IO hosts")
Reported-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
I have one regression fix for a minor build problem after the architecture
removal series, plus a rework of the barriers in the readl/writel
functions, thanks to work by Sinan Kaya:
This started from a discussion on the linuxpcc and rdma mailing lists
[1]. To summarize, we decided that architectures are responsible to
serialize readl() and writel() accesses on a device MMIO space relative
to DMA performed by that device.
This series provides a pessimistic implementation of that behavior for
asm-generic/io.h, which is in turn used by a number of architectures
(h8300, microblaze, nios2, openrisc, s390, sparc, um, unicore32, and
xtensa). Some of those presumably need no extra barriers, or something
weaker than rmb()/wmb(), and they are advised to override the new default
for better performance.
For inb()/outb(), the same barriers are used, but architectures might
want to add another barrier to outb() here if that can guarantee
non-posted behavior (some architectures can, others cannot do that).
The readl_relaxed()/writel_relaxed() family of functions retains the
existing behavior with no extra barriers.
[1]: https://lists.ozlabs.org/pipermail/linuxppc-dev/2018-March/170481.html
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=oBQh
-----END PGP SIGNATURE-----
Merge tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"I have one regression fix for a minor build problem after the
architecture removal series, plus a rework of the barriers in the
readl/writel functions, thanks to work by Sinan Kaya:
This started from a discussion on the linuxpcc and rdma mailing
lists[1]. To summarize, we decided that architectures are responsible
to serialize readl() and writel() accesses on a device MMIO space
relative to DMA performed by that device.
This series provides a pessimistic implementation of that behavior for
asm-generic/io.h, which is in turn used by a number of architectures
(h8300, microblaze, nios2, openrisc, s390, sparc, um, unicore32, and
xtensa). Some of those presumably need no extra barriers, or something
weaker than rmb()/wmb(), and they are advised to override the new
default for better performance.
For inb()/outb(), the same barriers are used, but architectures might
want to add another barrier to outb() here if that can guarantee
non-posted behavior (some architectures can, others cannot do that).
The readl_relaxed()/writel_relaxed() family of functions retains the
existing behavior with no extra barriers"
[1] https://lists.ozlabs.org/pipermail/linuxppc-dev/2018-March/170481.html
* tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
io: change writeX_relaxed() to remove barriers
io: change readX_relaxed() to remove barriers
dts: remove cris & metag dts hard link file
io: change inX() to have their own IO barrier overrides
io: change outX() to have their own IO barrier overrides
io: define stronger ordering for the default writeX() implementation
io: define stronger ordering for the default readX() implementation
io: define several IO & PIO barrier types for the asm-generic version
Now that we hardened writeX() API in asm-generic version, writeX_relaxed()
API is violating the rules when writeX_relaxed() == writeX() in the default
implementation.
The relaxed API shouldn't have any barriers in it and it doesn't provide
any ordering with respect to the memory transactions. The only requirement
is for writes to be ordered with respect to each other. This is achieved
by the volatile in the __raw_writeX() API.
Open code the relaxed API and remove any barriers in it.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Now that we hardened readX() API in asm-generic version, readX_relaxed()
API is violating the rules when readX_relaxed() == readX() in the default
implementation.
The relaxed API shouldn't have any barriers in it and it doesn't provide
any ordering with respect to the memory transactions. The only requirement
is for reads to be ordered with respect to each other. This is achieved
by the volatile in the __raw_readX() API.
Open code the relaxed API and remove any barriers in it.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=T++R
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- move pci_uevent_ers() out of pci.h (Michael Ellerman)
- skip ASPM common clock warning if BIOS already configured it (Sinan
Kaya)
- fix ASPM Coverity warning about threshold_ns (Gustavo A. R. Silva)
- remove last user of pci_get_bus_and_slot() and the function itself
(Sinan Kaya)
- add decoding for 16 GT/s link speed (Jay Fang)
- add interfaces to get max link speed and width (Tal Gilboa)
- add pcie_bandwidth_capable() to compute max supported link bandwidth
(Tal Gilboa)
- add pcie_bandwidth_available() to compute bandwidth available to
device (Tal Gilboa)
- add pcie_print_link_status() to log link speed and whether it's
limited (Tal Gilboa)
- use PCI core interfaces to report when device performance may be
limited by its slot instead of doing it in each driver (Tal Gilboa)
- fix possible cpqphp NULL pointer dereference (Shawn Lin)
- rescan more of the hierarchy on ACPI hotplug to fix Thunderbolt/xHCI
hotplug (Mika Westerberg)
- add support for PCI I/O port space that's neither directly accessible
via CPU in/out instructions nor directly mapped into CPU physical
memory space. This is fairly intrusive and includes minor changes to
interfaces used for I/O space on most platforms (Zhichang Yuan, John
Garry)
- add support for HiSilicon Hip06/Hip07 LPC I/O space (Zhichang Yuan,
John Garry)
- use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas)
- remove possible NULL pointer dereference in of_pci_bus_find_domain_nr()
(Shawn Lin)
- report quirk timings with dev_info (Bjorn Helgaas)
- report quirks that take longer than 10ms (Bjorn Helgaas)
- add and use Altera Vendor ID (Johannes Thumshirn)
- tidy Makefiles and comments (Bjorn Helgaas)
- don't set up INTx if MSI or MSI-X is enabled to align cris, frv,
ia64, and mn10300 with x86 (Bjorn Helgaas)
- move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick
Lawler)
- merge pcieport_if.h into portdrv.h (Bjorn Helgaas)
- move workaround for BIOS PME issue from portdrv to PCI core (Bjorn
Helgaas)
- completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas)
- remove portdrv link order dependency (Bjorn Helgaas)
- remove support for unused VC portdrv service (Bjorn Helgaas)
- simplify portdrv feature permission checking (Bjorn Helgaas)
- remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn
Helgaas)
- remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas)
- use cached AER capability offset (Frederick Lawler)
- don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg)
- rename pcie-dpc.c to dpc.c (Bjorn Helgaas)
- use generic pci_mmap_resource_range() instead of powerpc and xtensa
arch-specific versions (David Woodhouse)
- support arbitrary PCI host bridge offsets on sparc (Yinghai Lu)
- remove System and Video ROM reservations on sparc (Bjorn Helgaas)
- probe for device reset support during enumeration instead of runtime
(Bjorn Helgaas)
- add ACS quirk for Ampere (née APM) root ports (Feng Kan)
- add function 1 DMA alias quirk for Marvell 88SE9220 (Thomas
Vincent-Cross)
- protect device restore with device lock (Sinan Kaya)
- handle failure of FLR gracefully (Sinan Kaya)
- handle CRS (config retry status) after device resets (Sinan Kaya)
- skip various config reads for SR-IOV VFs as an optimization
(KarimAllah Ahmed)
- consolidate VPD code in vpd.c (Bjorn Helgaas)
- add Tegra dependency on PCI_MSI_IRQ_DOMAIN (Arnd Bergmann)
- add DT support for R-Car r8a7743 (Biju Das)
- fix a PCI_EJECT vs PCI_BUS_RELATIONS race condition in Hyper-V host
bridge driver that causes a general protection fault (Dexuan Cui)
- fix Hyper-V host bridge hang in MSI setup on 1-vCPU VMs with SR-IOV
(Dexuan Cui)
- fix Hyper-V host bridge hang when ejecting a VF before setting up MSI
(Dexuan Cui)
- make several structures static (Fengguang Wu)
- increase number of MSI IRQs supported by Synopsys DesignWare bridges
from 32 to 256 (Gustavo Pimentel)
- implemented multiplexed IRQ domain API and remove obsolete MSI IRQ
API from DesignWare drivers (Gustavo Pimentel)
- add Tegra power management support (Manikanta Maddireddy)
- add Tegra loadable module support (Manikanta Maddireddy)
- handle 64-bit BARs correctly in endpoint support (Niklas Cassel)
- support optional regulator for HiSilicon STB (Shawn Guo)
- use regulator bulk API for Qualcomm apq8064 (Srinivas Kandagatla)
- support power supplies for Qualcomm msm8996 (Srinivas Kandagatla)
* tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (123 commits)
MAINTAINERS: Add John Garry as maintainer for HiSilicon LPC driver
HISI LPC: Add ACPI support
ACPI / scan: Do not enumerate Indirect IO host children
ACPI / scan: Rename acpi_is_serial_bus_slave() for more general use
HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings
of: Add missing I/O range exception for indirect-IO devices
PCI: Apply the new generic I/O management on PCI IO hosts
PCI: Add fwnode handler as input param of pci_register_io_range()
PCI: Remove __weak tag from pci_register_io_range()
MAINTAINERS: Add missing /drivers/pci/cadence directory entry
fm10k: Report PCIe link properties with pcie_print_link_status()
net/mlx5e: Use pcie_bandwidth_available() to compute bandwidth
net/mlx5: Report PCIe link properties with pcie_print_link_status()
net/mlx4_core: Report PCIe link properties with pcie_print_link_status()
PCI: Add pcie_print_link_status() to log link speed and whether it's limited
PCI: Add pcie_bandwidth_available() to compute bandwidth available to device
misc: pci_endpoint_test: Handle 64-bit BARs properly
PCI: designware-ep: Make dw_pcie_ep_reset_bar() handle 64-bit BARs properly
PCI: endpoint: Make sure that BAR_5 does not have 64-bit flag set when clearing
PCI: endpoint: Make epc->ops->clear_bar()/pci_epc_clear_bar() take struct *epf_bar
...
Open code readX() inside inX() so that inX() variants have their own
overrideable Port IO barrier combinations as __io_pbr() and __io_par() for
actions to be taken before port IO and after port IO read.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Open code writeX() inside outX() so that outX() variants have their own
overrideable Port IO barrier combinations as __io_pbw() and __io_paw() for
actions to be taken before port IO and after port IO write.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The default implementation of mapping writeX() to __raw_writeX() is wrong.
writeX() has stronger ordering semantics. Compiler is allowed to reorder
memory writes against __raw_writeX().
Use the previously defined __io_aw() and __io_bw() macros to harden
code generation according to architecture support.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The default implementation of mapping readX() to __raw_readX() is wrong.
readX() has stronger ordering semantics. Compiler is allowed to reorder
__raw_readX() against the memory accesses following register read.
Use the previously defined __io_ar() and __io_br() macros to harden
code generation according to architecture support.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Getting ready to harden readX()/writeX() and inX()/outX() semantics for the
generic implementation.
Defining two set of macros as __io_br() and __io_ar() to indicate actions
to be taken before and after MMIO read.
Defining two set of macros as __io_bw() and __io_aw() to indicate actions
to be taken before and after MMIO write.
Defining two set of macros as __io_pbw() and __io_paw() to indicate actions
to be taken before and after Port IO write.
Defining two set of macros as __io_pbr() and __io_par() to indicate actions
to be taken before and after Port IO read.
If rmb() is available for the architecture, prefer rmb() as the default
implementation of __io_ar()/__io_par().
If wmb() is available for the architecture, prefer wmb() as the default
implementation of __io_bw()/__io_pbw().
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
After introducing the new generic I/O space management (Logical PIO), the
original PCI MMIO relevant helpers need to be updated based on the new
interfaces defined in logical PIO.
Adapt the corresponding code to match the changes introduced by logical
PIO.
Tested-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Zhichang Yuan <yuanzhichang@hisilicon.com>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de> # earlier draft
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
This removes the entire architecture code for blackfin, cris, frv, m32r,
metag, mn10300, score, and tile, including the associated device drivers.
I have been working with the (former) maintainers for each one to ensure
that my interpretation was right and the code is definitely unused in
mainline kernels. Many had fond memories of working on the respective
ports to start with and getting them included in upstream, but also saw
no point in keeping the port alive without any users.
In the end, it seems that while the eight architectures are extremely
different, they all suffered the same fate: There was one company
in charge of an SoC line, a CPU microarchitecture and a software
ecosystem, which was more costly than licensing newer off-the-shelf
CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems
that all the SoC product lines are still around, but have not used the
custom CPU architectures for several years at this point. In contrast,
CPU instruction sets that remain popular and have actively maintained
kernel ports tend to all be used across multiple licensees.
The removal came out of a discussion that is now documented at
https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
marking any ports as deprecated but remove them all at once after I made
sure that they are all unused. Some architectures (notably tile, mn10300,
and blackfin) are still being shipped in products with old kernels,
but those products will never be updated to newer kernel releases.
After this series, we still have a few architectures without mainline
gcc support:
- unicore32 and hexagon both have very outdated gcc releases, but the
maintainers promised to work on providing something newer. At least
in case of hexagon, this will only be llvm, not gcc.
- openrisc, risc-v and nds32 are still in the process of finishing their
support or getting it added to mainline gcc in the first place.
They all have patched gcc-7.3 ports that work to some degree, but
complete upstream support won't happen before gcc-8.1. Csky posted
their first kernel patch set last week, their situation will be similar.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=fQ8z
-----END PGP SIGNATURE-----
Merge tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pul removal of obsolete architecture ports from Arnd Bergmann:
"This removes the entire architecture code for blackfin, cris, frv,
m32r, metag, mn10300, score, and tile, including the associated device
drivers.
I have been working with the (former) maintainers for each one to
ensure that my interpretation was right and the code is definitely
unused in mainline kernels. Many had fond memories of working on the
respective ports to start with and getting them included in upstream,
but also saw no point in keeping the port alive without any users.
In the end, it seems that while the eight architectures are extremely
different, they all suffered the same fate: There was one company in
charge of an SoC line, a CPU microarchitecture and a software
ecosystem, which was more costly than licensing newer off-the-shelf
CPU cores from a third party (typically ARM, MIPS, or RISC-V). It
seems that all the SoC product lines are still around, but have not
used the custom CPU architectures for several years at this point. In
contrast, CPU instruction sets that remain popular and have actively
maintained kernel ports tend to all be used across multiple licensees.
[ See the new nds32 port merged in the previous commit for the next
generation of "one company in charge of an SoC line, a CPU
microarchitecture and a software ecosystem" - Linus ]
The removal came out of a discussion that is now documented at
https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
marking any ports as deprecated but remove them all at once after I
made sure that they are all unused. Some architectures (notably tile,
mn10300, and blackfin) are still being shipped in products with old
kernels, but those products will never be updated to newer kernel
releases.
After this series, we still have a few architectures without mainline
gcc support:
- unicore32 and hexagon both have very outdated gcc releases, but the
maintainers promised to work on providing something newer. At least
in case of hexagon, this will only be llvm, not gcc.
- openrisc, risc-v and nds32 are still in the process of finishing
their support or getting it added to mainline gcc in the first
place. They all have patched gcc-7.3 ports that work to some
degree, but complete upstream support won't happen before gcc-8.1.
Csky posted their first kernel patch set last week, their situation
will be similar
[ Palmer Dabbelt points out that RISC-V support is in mainline gcc
since gcc-7, although gcc-7.3.0 is the recommended minimum - Linus ]"
This really says it all:
2498 files changed, 95 insertions(+), 467668 deletions(-)
* tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits)
MAINTAINERS: UNICORE32: Change email account
staging: iio: remove iio-trig-bfin-timer driver
tty: hvc: remove tile driver
tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers
serial: remove tile uart driver
serial: remove m32r_sio driver
serial: remove blackfin drivers
serial: remove cris/etrax uart drivers
usb: Remove Blackfin references in USB support
usb: isp1362: remove blackfin arch glue
usb: musb: remove blackfin port
usb: host: remove tilegx platform glue
pwm: remove pwm-bfin driver
i2c: remove bfin-twi driver
spi: remove blackfin related host drivers
watchdog: remove bfin_wdt driver
can: remove bfin_can driver
mmc: remove bfin_sdh driver
input: misc: remove blackfin rotary driver
input: keyboard: remove bf54x driver
...
41f8bba7f5 ("of/pci: Add pci_register_io_range() and
pci_pio_to_address()") added support for PCI I/O space mapped into CPU
physical memory space. With that support, the I/O ranges configured for
PCI/PCIe hosts on some architectures can be mapped to logical PIO and
converted easily between CPU address and the corresponding logical PIO.
Based on this, PCI I/O port space can be accessed via in/out accessors that
use memory read/write.
But on some platforms, there are bus hosts that access I/O port space with
host-local I/O port addresses rather than memory addresses.
Add a more generic I/O mapping method to support those devices. With this
patch, both the CPU addresses and the host-local port can be mapped into
the logical PIO space with different logical/fake PIOs. After this, all
the I/O accesses to either PCI MMIO devices or host-local I/O peripherals
can be unified into the existing I/O accessors defined in asm-generic/io.h
and be redirected to the right device-specific hooks based on the input
logical PIO.
Tested-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Zhichang Yuan <yuanzhichang@hisilicon.com>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
[bhelgaas: remove -EFAULT return from logic_pio_register_range() per
https://lkml.kernel.org/r/20180403143909.GA21171@ulmo, fix NULL pointer
checking per https://lkml.kernel.org/r/20180403211505.GA29612@embeddedor.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
It allows some architectures to use this generic macro instead of
defining theirs.
sparc: io: To use the define of ioremap_[nocache|wc|wb] in asm-generic/io.h
It will move the ioremap_nocache out of the CONFIG_MMU ifdef. This means that
in order to suppress re-definition errors we need to remove the #define
in arch/sparc/include/asm/io_32.h. Also, the change adds a prototype for
ioremap where size is size_t and offset is phys_addr_t so fix that as well.
Signed-off-by: Greentime Hu <greentime@andestech.com>
Generic header defines xlate_dev_kmem_ptr().
Reuse it from generic header and remove in x86 code.
Move a description to the generic header as well.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Baolin Wang <baolin.wang@spreadtrum.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-i2c@vger.kernel.org
Cc: wsa@the-dreams.de
Link: http://lkml.kernel.org/r/20170630170934.83028-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Generic header defines memset_io, memcpy_fromio(). and memcpy_toio().
Reuse them from generic header and remove in x86 code.
Move the descriptions to the generic header as well.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Baolin Wang <baolin.wang@spreadtrum.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-i2c@vger.kernel.org
Cc: wsa@the-dreams.de
Link: http://lkml.kernel.org/r/20170630170934.83028-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This will allow device drivers to consistently use io{read,write}XX
also for 64-bit accesses.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
While reviewing the addition of io{read,write}64be accessors, Arnd
-finds a potential problem:
"If an architecture overrides readq/writeq to have barriers but does
not override ioread64be/iowrite64be, this will lack the barriers and
behave differently from the little-endian version. I think the only
affected architecture is ARC, since ARM and ARM64 both override the
big-endian accessors to have the correct barriers, and all others
don't use barriers at all."
-suggests a fix for the same problem in existing code (16/32-bit
accessors); the fix leads "to a double-swap on architectures that
don't override the io{read,write}{16,32}be accessors, but it will
work correctly on all architectures without them having to override
these accessors."
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Whilst commit 9439eb3ab9 ("asm-generic: io: implement relaxed
accessor macros as conditional wrappers") makes the *_relaxed forms of
I/O accessors universally available to drivers, in cases where writeq()
is implemented via the io-64-nonatomic helpers, writeq_relaxed() will
end up falling back to writel() regardless of whether writel_relaxed()
is available (identically for s/write/read/).
Add corresponding relaxed forms of the nonatomic helpers to delegate
to the equivalent 32-bit accessors as appropriate. We also need to fix
io.h to avoid defining default relaxed variants if the basic accessors
themselves don't exist.
CC: Christoph Hellwig <hch@lst.de>
CC: Darren Hart <dvhart@linux.intel.com>
CC: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We currently have no safe way of currently defining architecture
agnostic IOMMU ioremap_*() variants. The trend is for folks to
*assume* that ioremap_nocache() should be the default everywhere
and then add this mapping on each architectures -- this is not
correct today for a variety of reasons.
We have two options:
1) Sit and wait for every architecture in Linux to get a
an ioremap_*() variant defined before including it upstream.
2) Gather consensus on a safe architecture agnostic ioremap_*()
default.
Approach 1) introduces development latencies, and since 2) will
take time and work on clarifying semantics the only remaining
sensible thing to do to avoid issues is returning NULL on
ioremap_*() variants.
In order for this to work we must have all architectures declare
their own ioremap_*() variants as defined. This will take some
work, do this for ioremp_uc() to set the example as its only
currently implemented on x86. Document all this.
We only provide implementation support for ioremap_uc() as the
other ioremap_*() variants are well defined all over the kernel
for other architectures already.
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: benh@kernel.crashing.org
Cc: bp@suse.de
Cc: dan.j.williams@intel.com
Cc: geert@linux-m68k.org
Cc: hch@lst.de
Cc: hmh@hmh.eng.br
Cc: jgross@suse.com
Cc: linux-mm@kvack.org
Cc: luto@amacapital.net
Cc: mpe@ellerman.id.au
Cc: mst@redhat.com
Cc: ralf@linux-mips.org
Cc: ross.zwisler@linux.intel.com
Cc: stefan.bader@canonical.com
Cc: tj@kernel.org
Cc: tomi.valkeinen@ti.com
Cc: toshi.kani@hp.com
Link: http://lkml.kernel.org/r/1436488096-3165-1-git-send-email-mcgrof@do-not-panic.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add ioremap_wt() for creating Write-Through mappings on x86. It
follows the same model as ioremap_wc() for multi-arch support.
Define ARCH_HAS_IOREMAP_WT in the x86 version of io.h to
indicate that ioremap_wt() is implemented on x86.
Also update the PAT documentation file to cover ioremap_wt().
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: hch@lst.de
Cc: hmh@hmh.eng.br
Cc: jgross@suse.com
Cc: konrad.wilk@oracle.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: linux-nvdimm@lists.01.org
Cc: stefan.bader@canonical.com
Cc: yigal@plexistor.com
Link: http://lkml.kernel.org/r/1433436928-31903-8-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
ioremap_nocache() currently uses UC- by default. Our goal is to
eventually make UC the default. Linux maps UC- to PCD=1, PWT=0
page attributes on non-PAT systems. Linux maps UC to PCD=1,
PWT=1 page attributes on non-PAT systems. On non-PAT and PAT
systems a WC MTRR has different effects on pages with either of
these attributes. In order to help with a smooth transition its
best to enable use of UC (PCD,1, PWT=1) on a region as that
ensures a WC MTRR will have no effect on a region, this however
requires us to have an way to declare a region as UC and we
currently do not have a way to do this.
WC MTRR on non-PAT system with PCD=1, PWT=0 (UC-) yields WC.
WC MTRR on non-PAT system with PCD=1, PWT=1 (UC) yields UC.
WC MTRR on PAT system with PCD=1, PWT=0 (UC-) yields WC.
WC MTRR on PAT system with PCD=1, PWT=1 (UC) yields UC.
A flip of the default ioremap_nocache() behaviour from UC- to UC
can therefore regress a memory region from effective memory type
WC to UC if MTRRs are used. Use of MTRRs should be phased out
and in the best case only arch_phys_wc_add() use will remain,
even if this happens arch_phys_wc_add() will have an effect on
non-PAT systems and changes to default ioremap_nocache()
behaviour could regress drivers.
Now, ideally we'd use ioremap_nocache() on the regions in which
we'd need uncachable memory types and avoid any MTRRs on those
regions. There are however some restrictions on MTRRs use, such
as the requirement of having the base and size of variable sized
MTRRs to be powers of two, which could mean having to use a WC
MTRR over a large area which includes a region in which
write-combining effects are undesirable.
Add ioremap_uc() to help with the both phasing out of MTRR use
and also provide a way to blacklist small WC undesirable regions
in devices with mixed regions which are size-implicated to use
large WC MTRRs. Use of ioremap_uc() helps phase out MTRR use by
avoiding regressions with an eventual flip of default behaviour
or ioremap_nocache() from UC- to UC.
Drivers working with WC MTRRs can use the below table to review
and consider the use of ioremap*() and similar helpers to ensure
appropriate behaviour long term even if default
ioremap_nocache() behaviour changes from UC- to UC.
Although ioremap_uc() is being added we leave set_memory_uc() to
use UC- as only initial memory type setup is required to be able
to accommodate existing device drivers and phase out MTRR use.
It should also be clarified that set_memory_uc() cannot be used
with IO memory, even though its use will not return any errors,
it really has no effect.
----------------------------------------------------------------------
MTRR Non-PAT PAT Linux ioremap value Effective memory type
----------------------------------------------------------------------
Non-PAT | PAT
PAT
|PCD
||PWT
|||
WC 000 WB _PAGE_CACHE_MODE_WB WC | WC
WC 001 WC _PAGE_CACHE_MODE_WC WC* | WC
WC 010 UC- _PAGE_CACHE_MODE_UC_MINUS WC* | WC
WC 011 UC _PAGE_CACHE_MODE_UC UC | UC
----------------------------------------------------------------------
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Travis <travis@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Ville Syrjälä <syrjala@sci.fi>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-fbdev@vger.kernel.org
Link: http://lkml.kernel.org/r/1430343851-967-2-git-send-email-mcgrof@do-not-panic.com
Link: http://lkml.kernel.org/r/1431332153-18566-9-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently driver writers need to use io{read,write}{8,16,32}_rep() when
accessing FIFO registers portably. This is bad for two reasons: it is
inconsistent with how other registers are accessed using the standard
{read,write}{b,w,l}() functions, which can lead to confusion. On some
architectures the io{read,write}*() functions also need to perform some
extra checks to determine whether an address is memory-mapped or refers
to I/O space. Drivers which can be expected to never use I/O can safely
use the {read,write}s{b,w,l,q}(), just like they use their non-string
variants and there's no need for these extra checks.
This patch implements generic versions of readsb(), readsw(), readsl(),
readsq(), writesb(), writesw(), writesl() and writesq(). Variants of
these string functions for I/O accesses (ins*() and outs*() as well as
ioread*_rep() and iowrite*_rep()) are now implemented in terms of the
new functions.
Going forward, {read,write}{,s}{b,w,l,q}() should be used consistently
by drivers for devices that will only ever be memory-mapped and hence
don't need to access I/O space, whereas io{read,write}{8,16,32}_rep()
should be used by drivers for devices that can be either memory-mapped
or I/O-mapped.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Overriding I/O accessors and helpers is currently very inconsistent.
This commit introduces a homogeneous way to override functions by
checking for the existence of a macro with the same of the function.
Architectures can provide their own implementations and communicate this
to the generic header by defining the appropriate macro. Doing this will
also help prevent the implementations from being subsequently
overridden.
While at it, also turn a lot of macros into static inline functions for
better type checking and to provide a canonical signature for overriding
architectures to copy. Also reorder functions by logical groups.
Signed-off-by: Thierry Reding <treding@nvidia.com>
{read,write}{b,w,l,q}_relaxed are implemented by some architectures in
order to permit memory-mapped I/O accesses with weaker barrier semantics
than the non-relaxed variants.
This patch adds wrappers to asm-generic so that drivers can rely on the
relaxed accessors being available, even if they don't always provide
weaker ordering guarantees. Since some architectures both include
asm-generic/io.h and define some relaxed accessors, the definitions here
are conditional for the time being.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The !CONFIG_GENERIC_IOMAP version of ioport_map() is wrong. It returns a
mapped, i.e., virtual, address that can start from zero and completely
ignores the PCI_IOBASE and IO_SPACE_LIMIT that most architectures that use
!CONFIG_GENERIC_MAP define.
Tested-by: Tanmay Inamdar <tinamdar@apm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
If the renamed symbol is defined lib/iomap.c implements ioport_map and
ioport_unmap and currently (nearly) all platforms define the port
accessor functions outb/inb and friend unconditionally. So
HAS_IOPORT_MAP is the better name for this.
Consequently NO_IOPORT is renamed to NO_IOPORT_MAP.
The motivation for this change is to reintroduce a symbol HAS_IOPORT
that signals if outb/int et al are available. I will address that at
least one merge window later though to keep surprises to a minimum and
catch new introductions of (HAS|NO)_IOPORT.
The changes in this commit were done using:
$ git grep -l -E '(NO|HAS)_IOPORT' | xargs perl -p -i -e 's/\b((?:CONFIG_)?(?:NO|HAS)_IOPORT)\b/$1_MAP/'
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On s390 the prefix page and absolute zero pages are not correctly
returned when reading /dev/mem. The reason is that the s390 asm/io.h
file includes the asm-generic/io.h file which then defines
xlate_dev_mem_ptr() and therefore overwrites the s390 specific
version that does the correct swap operation for prefix and absolute
zero pages. The problem is a regression that was introduced with git
commit cd248341 (s390/pci: base support).
To fix the problem add "#ifndef xlate_dev_mem_ptr" in asm-generic/io.h
and "#define xlate_dev_mem_ptr" in asm/io.h. This ensures that the
s390 version is used. For completeness also add the "#ifndef"
construct for xlate_dev_kmem_ptr().
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This adds core architecture support for Imagination's Meta processor
cores, followed by some later miscellaneous arch/metag cleanups and
fixes which I kept separate to ease review:
- Support for basic Meta 1 (ATP) and Meta 2 (HTP) core architecture
- A few fixes all over, particularly for symbol prefixes
- A few privilege protection fixes
- Several cleanups (setup.c includes, split out a lot of metag_ksyms.c)
- Fix some missing exports
- Convert hugetlb to use vm_unmapped_area()
- Copy device tree to non-init memory
- Provide dma_get_sgtable()
Signed-off-by: James Hogan <james.hogan@imgtec.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=65cR
-----END PGP SIGNATURE-----
Merge tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag
Pull new ImgTec Meta architecture from James Hogan:
"This adds core architecture support for Imagination's Meta processor
cores, followed by some later miscellaneous arch/metag cleanups and
fixes which I kept separate to ease review:
- Support for basic Meta 1 (ATP) and Meta 2 (HTP) core architecture
- A few fixes all over, particularly for symbol prefixes
- A few privilege protection fixes
- Several cleanups (setup.c includes, split out a lot of
metag_ksyms.c)
- Fix some missing exports
- Convert hugetlb to use vm_unmapped_area()
- Copy device tree to non-init memory
- Provide dma_get_sgtable()"
* tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: (61 commits)
metag: Provide dma_get_sgtable()
metag: prom.h: remove declaration of metag_dt_memblock_reserve()
metag: copy devicetree to non-init memory
metag: cleanup metag_ksyms.c includes
metag: move mm/init.c exports out of metag_ksyms.c
metag: move usercopy.c exports out of metag_ksyms.c
metag: move setup.c exports out of metag_ksyms.c
metag: move kick.c exports out of metag_ksyms.c
metag: move traps.c exports out of metag_ksyms.c
metag: move irq enable out of irqflags.h on SMP
genksyms: fix metag symbol prefix on crc symbols
metag: hugetlb: convert to vm_unmapped_area()
metag: export clear_page and copy_page
metag: export metag_code_cache_flush_all
metag: protect more non-MMU memory regions
metag: make TXPRIVEXT bits explicit
metag: kernel/setup.c: sort includes
perf: Enable building perf tools for Meta
metag: add boot time LNKGET/LNKSET check
metag: add __init to metag_cache_probe()
...
Make asm-generic/io.h check CONFIG_VIRT_TO_BUS before defining
virt_to_bus() and bus_to_virt(), otherwise it's easy to accidentally
have a silently failing incorrect direct mapped definition rather then
no definition at all.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Pull microblaze update from Michal Simek:
"Microblaze changes.
After my discussion with Arnd I have also added there asm-generic io
patch which is Acked by him and Geert."
* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
asm-generic: io: Fix ioread16/32be and iowrite16/32be
microblaze: Do not use module.h in files which are not modules
microblaze: Fix coding style issues
microblaze: Add missing return from debugfs_tlb
microblaze: Makefile clean
microblaze: Add .gitignore entries for auto-generated files
microblaze: Fix strncpy_from_user macro
E.g. readl is defined like this
#define readl(addr) __le32_to_cpu(__raw_readl(addr))
If a there is a readl() call that doesn't check the return value
this will cause a compile warning on big endian machines due to
the __le32_to_cpu macro magic.
E.g. code like this:
readl(addr);
will generate the following compile warning:
warning: value computed is not used [-Wunused-value]
With this patch we get rid of dozens of compile warnings on s390.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fix ioreadXXbe and iowriteXXbe functions which did
additional little endian conversion on native big endian systems.
Using be_to_cpu (cpu_to_be) conversions with __raw_read/write
functions have resolved it.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Will Deacon <will.deacon@arm.com>
CC: linux-arch@vger.kernel.org
* a set of patches from Lars-Peter Clausen to generalize asm/mmu.h
and use it in the architectures that don't need any special handling.
* A patch from Will Deacon to remove the {read,write}s{b,w,l} as
discussed during the arm64 review
* A patch from James Hogan that helps with the meta architecture
series.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=uewR
-----END PGP SIGNATURE-----
Merge tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanup from Arnd Bergmann:
"These are a few cleanups for asm-generic:
- a set of patches from Lars-Peter Clausen to generalize asm/mmu.h
and use it in the architectures that don't need any special
handling.
- A patch from Will Deacon to remove the {read,write}s{b,w,l} as
discussed during the arm64 review
- A patch from James Hogan that helps with the meta architecture
series."
* tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
xtensa: Use generic asm/mmu.h for nommu
h8300: Use generic asm/mmu.h
c6x: Use generic asm/mmu.h
asm-generic/mmu.h: Add support for FDPIC
asm-generic/mmu.h: Remove unused vmlist field from mm_context_t
asm-generic: io: remove {read,write} string functions
asm-generic/io.h: remove asm/cacheflush.h include
The {in,out}s{b,w,l} functions are designed to operate on a stream of
bytes and therefore should not perform any byte-swapping, regardless of
the CPU byte order.
This patch fixes the generic IO header so that {in,out}s{b,w,l} call the
__raw_{read,write} functions directly rather than going via the
endian-correcting accessors.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ben Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add PCI support for s390, (only 64 bit mode is supported by hardware):
- PCI facility tests
- PCI instructions: pcilg, pcistg, pcistb, stpcifc, mpcifc, rpcit
- map readb/w/l/q and writeb/w/l/q to pcilg and pcistg instructions
- pci_iomap implementation
- memcpy_fromio/toio
- pci_root_ops using special pcilg/pcistg
- device, bus and domain allocation
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The {read,write}s{b,w,l} functions are not defined across all
architectures and therefore shouldn't be used by portable drivers. We
should encourage driver writers to use the io{read,write}{8,16,32}_rep
functions instead.
This patch removes the {read,write} string functions for the generic IO
header as they have no place in a new architecture port.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Including <asm/cacheflush.h> from <asm-generic/io.h> prevents
cacheflush.h being able to use I/O functions like readl and writel due
to circular include dependencies. It doesn't appear as if anything from
cacheflush.h is actually used by the generic io.h, so remove the
include.
I've compile tested a defconfig compilation of blackfin, openrisc (which
needed <asm/pgtable.h> including from it's <asm/io.h> to get the PAGE_*
definitions), and xtensa.
Other architectures which use asm-generic/io.h are score and unicore32,
and looking at their io.h I don't see any obvious problems.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Jonas Bonn <jonas@southpole.se>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Many architectures don't want to pull in iomap.c,
so they ended up duplicating pci_iomap from that file.
That function isn't trivial, and we are going to modify it
https://lkml.org/lkml/2011/11/14/183
so the duplication hurts.
This reduces the scope of the problem significantly,
by moving pci_iomap to a separate file and
referencing that from all architectures.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJPBZXBAAoJECgfDbjSjVRpuuYIAIMD0wE96MuTOSBJX4VG8VAP
UyjL9dsfMRy8CKioQo5/fxpTY07YBCWmNauSSX7pzgcoUKBfYIGn4Z1qwGYsWK9M
CzLs6PXLTugw0FtKobHZl/klRTWEBS6YOUjp9x568rplwF+Ppk7b993uj7eS/g+e
T0mUKzqg4/UavbHd9+W5KgC4drQ5hgtu2WZHoUxBK4umnd3C2G+U82Sthg50o/XU
SC8IGm39K8I36HoIWgXj3Y7nkOP3mQELohOT4ZPiVSmLvGS4i47+ix75anO+8ZvZ
jxHr8RC85IK1Nd89NZhbKOyvx0QQiwoKUZaTwcWXJNSOADzZnM6icdIsodc+Elo=
=ccQZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
lib: use generic pci_iomap on all architectures
Many architectures don't want to pull in iomap.c,
so they ended up duplicating pci_iomap from that file.
That function isn't trivial, and we are going to modify it
https://lkml.org/lkml/2011/11/14/183
so the duplication hurts.
This reduces the scope of the problem significantly,
by moving pci_iomap to a separate file and
referencing that from all architectures.
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
alpha: drop pci_iomap/pci_iounmap from pci-noop.c
mn10300: switch to GENERIC_PCI_IOMAP
mn10300: add missing __iomap markers
frv: switch to GENERIC_PCI_IOMAP
tile: switch to GENERIC_PCI_IOMAP
tile: don't panic on iomap
sparc: switch to GENERIC_PCI_IOMAP
sh: switch to GENERIC_PCI_IOMAP
powerpc: switch to GENERIC_PCI_IOMAP
parisc: switch to GENERIC_PCI_IOMAP
mips: switch to GENERIC_PCI_IOMAP
microblaze: switch to GENERIC_PCI_IOMAP
arm: switch to GENERIC_PCI_IOMAP
alpha: switch to GENERIC_PCI_IOMAP
lib: add GENERIC_PCI_IOMAP
lib: move GENERIC_IOMAP to lib/Kconfig
Fix up trivial conflicts due to changes nearby in arch/{m68k,score}/Kconfig
Many architectures want a generic pci_iomap but
not the rest of iomap.c. Split that to a separate .c
file and add a new config symbol. select automatically
by GENERIC_IOMAP.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the CONFIG_HAS_IOPORT and CONFIG_PCI options to decide whether or
not functions for mapping these areas are provided.
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Some of the implementations, in particular the ioremap variants, in
asm-generic/io.h are for systems without an MMU. In order to be able to
use the generic header file for systems with an MMU, this patch wraps
these implementations in checks for CONFIG_MMU.
Tested on OpenRISC.
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Cc: liqin.chen@sunplusct.com
Cc: gxt@mprc.pku.edu.cn
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The definitions for the PC-style PIO functions in asm-generic/io.h were
meant as dummies so you could compile code on architectures without
ISA and PCI buses. However, unicore32 actually wants to use them
with a real PCI bus, so they need to be defined to actually address
the register window holding the I/O ports.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
