Currently, QP1 is created using pkey index 0. This patch simply looks
for the index containing the default pkey, rather than hard-coding
pkey index 0.
This change will have no effect in native mode, since QP0 and QP1 are
created before the SM configures the port, so pkey table will still be
the default table defined by the IB Spec, in C10-123: "If non-volatile
storage is not used to hold P_Key Table contents, then if a PM
(Partition Manager) is not present, and prior to PM initialization of
the P_Key Table, the P_Key Table must act as if it contains a single
valid entry, at P_Key_ix = 0, containing the default partition
key. All other entries in the P_Key Table must be invalid."
Thus, in the native mode case, the driver will find the default pkey
at index 0 (so it will be no different than the hard-coding).
However, in SR-IOV mode, for VFs, the pkey table may be
paravirtualized, so that the VF's pkey index zero may not necessarily
be mapped to the real pkey index 0. For VFs, therefore, it is
important to find the virtual index which maps to the real default
pkey.
This commit does the following for QP1 creation:
1. Find the pkey index containing the default pkey, and use that index
if found. ib_find_pkey() returns the index of the
limited-membership default pkey (0x7FFF) if the full-member default
pkey is not in the table.
2. If neither form of the default pkey is found, use pkey index 0
(previous behavior).
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
In the sq_overhead() function, if qp_typ is equal to IB_QPT_RC, size
will be used uninitialized.
Signed-off-by: Andi Shyti <andi@etezian.org>
Acked-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Introduce enbale_hca and disable_hca commands to signify when the
driver starts or ceases to operate on the device.
In addition the driver will use boot and init pages count; boot pages
is required to allow firmware to complete boot commands and the other
to complete init hca. Command interface revision is bumped to 4 to
enforce using supported firmware.
This patch breaks compatibility with old versions of firmware (< 4);
however, the first GA firmware we will publish will support version 4
so this should not be a problem.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
We can't dereference "ent" after passing it to free_cmd().
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
We don't set "resp.reserved". Since it's at the end of the struct
that means we don't have to copy it to the user.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Fix to return a negative error code from the error handling case
instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Provide a kernel configuration option to allow the kernel user helpers
to be removed from the vector page, thereby preventing their use with
ROP (return orientated programming) attacks. This option is only
visible for CPU architectures which natively support all the operations
which kernel user helpers would normally provide, and must be enabled
with caution.
Cc: <stable@vger.kernel.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
FIQ should no longer copy the FIQ code into the user visible vector
page. Instead, it should use the hidden page. This change makes
that happen.
Cc: <stable@vger.kernel.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Use linker magic to create the vectors and vector stubs: we can tell the
linker to place them at an appropriate VMA, but keep the LMA within the
kernel. This gets rid of some unnecessary symbol manipulation, and
have the linker calculate the relocations appropriately.
Cc: <stable@vger.kernel.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Move the machine vector stubs into the page above the vector page,
which we can prevent from being visible to userspace. Also move
the reset stub, and place the swi vector at a location that the
'ldr' can get to it.
This hides pointers into the kernel which could give valuable
information to attackers, and reduces the number of exploitable
instructions at a fixed address.
Cc: <stable@vger.kernel.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Poison the memory between each kuser helper. This ensures that any
branch between the kuser helpers will be appropriately trapped.
Cc: <stable@vger.kernel.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Fill the empty regions of the vectors page with an exception generating
instruction. This ensures that any inappropriate branch to the vector
page is appropriately trapped, rather than just encountering some code
to execute. (The vectors page was filled with zero before, which
corresponds with the "andeq r0, r0, r0" instruction - a no-op.)
Cc: <stable@vger.kernel.org>
Acked-by Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Pull networking fixes from David Miller:
1) Fix association failures not triggering a connect-failure event in
cfg80211, from Johannes Berg.
2) Eliminate a potential NULL deref with older iptables tools when
configuring xt_socket rules, from Eric Dumazet.
3) Missing RTNL locking in wireless regulatory code, from Johannes
Berg.
4) Fix OOPS caused by firmware loading races in ath9k_htc, from Alexey
Khoroshilov.
5) Fix usb URB leak in usb_8dev CAN driver, also from Alexey
Khoroshilov.
6) VXLAN namespace teardown fails to unregister devices, from Stephen
Hemminger.
7) Fix multicast settings getting dropped by firmware in qlcnic driver,
from Sucheta Chakraborty.
8) Add sysctl range enforcement for tcp_syn_retries, from Michal Tesar.
9) Fix a nasty bug in bridging where an active timer would get
reinitialized with a setup_timer() call. From Eric Dumazet.
10) Fix use after free in new mlx5 driver, from Dan Carpenter.
11) Fix freed pointer reference in ipv6 multicast routing on namespace
cleanup, from Hannes Frederic Sowa.
12) Some usbnet drivers report TSO and SG in their feature set, but the
usbnet layer doesn't really support them. From Eric Dumazet.
13) Fix crash on EEH errors in tg3 driver, from Gavin Shan.
14) Drop cb_lock when requesting modules in genetlink, from Stanislaw
Gruszka.
15) Kernel stack leaks in cbq scheduler and af_key pfkey messages, from
Dan Carpenter.
16) FEC driver erroneously signals NETDEV_TX_BUSY on transmit leading to
endless loops, from Uwe Kleine-König.
17) Fix hangs from loading mvneta driver, from Arnaud Patard.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (84 commits)
mlx5: fix error return code in mlx5_alloc_uuars()
mvneta: Try to fix mvneta when compiled as module
mvneta: Fix hang when loading the mvneta driver
atl1c: Fix misuse of netdev_alloc_skb in refilling rx ring
genetlink: fix usage of NLM_F_EXCL or NLM_F_REPLACE
af_key: more info leaks in pfkey messages
net/fec: Don't let ndo_start_xmit return NETDEV_TX_BUSY without link
net_sched: Fix stack info leak in cbq_dump_wrr().
igb: fix vlan filtering in promisc mode when not in VT mode
ixgbe: Fix Tx Hang issue with lldpad on 82598EB
genetlink: release cb_lock before requesting additional module
net: fec: workaround stop tx during errata ERR006358
qlcnic: Fix diagnostic interrupt test for 83xx adapters.
qlcnic: Fix setting Guest VLAN
qlcnic: Fix operation type and command type.
qlcnic: Fix initialization of work function.
Revert "atl1c: Fix misuse of netdev_alloc_skb in refilling rx ring"
atl1c: Fix misuse of netdev_alloc_skb in refilling rx ring
net/tg3: Fix warning from pci_disable_device()
net/tg3: Fix kernel crash
...
When creating tunnel QPs for special QP tunneling, look for the
default pkey in the slave's virtual pkey table. If it is present, use
the real pkey index where the default pkey is located.
If the default pkey is not found in the pkey table, use the real pkey
index which is stored at index 0 in the slave's virtual pkey table
(this is the current behavior).
This change is required to support cloud computing, where the
paravirtualized index of the default pkey is moved to index 1 or
higher. The pkey at paravirtualized index 0 is used for the default
IPoIB interface created by the VF.
Its possible for the pkey value at paravirtualized index 0 to be
invalid (zero) at VF probe time (pkey index 0 is mapped to real pkey
index 127, which contains pkey = 0).
At some point after the VF probe, the cloud computing interface at the
hypervisor maps virtual index 0 for the VF to the pkey index
containing the pkey that IPoIB will use in its operation. However,
when the tunnel QP is created, the pkey at the slave's virtual index 0
is still mapped to the invalid pkey index, so tunnel QP creation
fails.
This commit causes the hypervisor to search for the default pkey in
the slave's pkey table -- and this pkey is present in the table (at
index > 0) at tunnel QP creation time, so that the tunnel QP creation
will succeed.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
We have:
- A build failure fix for the NCI SPI transport layer due to a
missing CRC_CCITT Kconfig dependency.
- A netlink command rename: CMD_FW_UPLOAD was merged during the 3.11
merge window but the typical terminology for loading a firmware to a
target is firmware download rather than upload. In order to avoid any
confusion in a file exported to userspace, we rename this command into
CMD_FW_DOWNLOAD.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=p4r5
-----END PGP SIGNATURE-----
Merge tag 'nfc-fixes-3.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-fixes
Samuel Ortiz <sameo@linux.intel.com> says:
'This is the second NFC fixes pull request for 3.11.
We have:
- A build failure fix for the NCI SPI transport layer due to a
missing CRC_CCITT Kconfig dependency.
- A netlink command rename: CMD_FW_UPLOAD was merged during the 3.11
merge window but the typical terminology for loading a firmware to a
target is firmware download rather than upload. In order to avoid any
confusion in a file exported to userspace, we rename this command into
CMD_FW_DOWNLOAD."
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Soon the coelho@ti.com email will not be valid anymore, so change it
to my private one.
Cc: Luciano Coelho <luca@coelho.fi>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
We missed bss_mode check for P2P client.
Signed-off-by: Stone Piao <piaoyun@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This patch fixes an issue wherein adhoc rates were being copied
into association request from P2P client.
Cc: <stable@vger.kernel.org> # 3.10.y
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Stone Piao <piaoyun@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This patch fixes an issue wherein association would fail on P2P
interfaces. This happened because we are checking priv->mode
against NL80211_IFTYPE_STATION. While this check is correct for
infrastructure stations, it would fail P2P clients for which mode
is NL80211_IFTYPE_P2P_CLIENT.
Better check would be bss_role which has only 2 values: STA/AP.
Cc: <stable@vger.kernel.org> # 3.10.y
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Stone Piao <piaoyun@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pull MIPS fixes from Ralf Baechle:
- BMIPS SMP fixes
- a build fix necessary for older compilers
- two more bugs found my Chandras' testing
- and one more build fix
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: BMIPS: fix slave CPU booting when physical CPU is not 0
MIPS: BMIPS: do not change interrupt routing depending on boot CPU
MIPS: powertv: Fix arguments for free_reserved_area()
MIPS: Set default CPU type for BCM47XX platforms
MIPS: uapi/asm/siginfo.h: Fix GCC 4.1.2 compilation
MIPS: Fix multiple definitions of UNCAC_BASE.
- Three fixes for ARM/ARM64 to either compile or not certain generic drivers
- Fix for avoiding a potential deadlock when an user space event channel is destroyed.
- Fix a workqueue resuming multiple times.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJR9/upAAoJEFjIrFwIi8fJueIH/0/cw1AP/wcUfD8QMmF8ySw2
s8BKUAZo6his9fepLw7mWN1r3SDR+TBBq3Oi/M96O3OZNEbLPxQBAIc/rTXJTxKH
Jw82IIWSNn50eUX3oldwbNZW+V0rzIupsRwESLOc48wbVnwyw74vU4/8lljH7Xyp
u8sSGw+2Q7mx9Pa85fA+HHMJA1LO1QemoSQqFVCbTFdv1MHJgFxb1eeDNQ/8X0by
wAOMDkyboWYK84kRxJTh+bj+Ie4Z+kC+NlDS/gvch9cdxHrVENZyND3grNwUXkMr
3S1zF6f0529IwkKjYDNCHtrAdRy6+o1KNvKnbp9/iylSnBRPquukMU1AmuvlrNM=
=lwZR
-----END PGP SIGNATURE-----
Merge tag 'stable/for-linus-3.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull Xen fixes from Konrad Rzeszutek Wilk:
- Three fixes for ARM/ARM64 to either compile or not certain generic
drivers
- Fix for avoiding a potential deadlock when an user space event
channel is destroyed.
- Fix a workqueue resuming multiple times.
* tag 'stable/for-linus-3.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/tmem: do not allow XEN_TMEM on ARM64
xen/evtchn: avoid a deadlock when unbinding an event channel
xen/arm: enable PV control for ARM
xen/arm64: Don't compile cpu hotplug
xenbus: frontend resume cleanup
Here are some tiny USB fixes for 3.11-rc4
Nothing major, some gadget fixes, some new device ids, a new tiny driver
for the ANT+ USB device, and a number of fixes for the mos7840 driver
that were much needed.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlH4EDUACgkQMUfUDdst+ynOJQCeLaSvPjYMIERxRNObzQ6Ggg6Z
vaoAn0tG1jItvDuBFll5efIDwBxITRBc
=XlRP
-----END PGP SIGNATURE-----
Merge tag 'usb-3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some tiny USB fixes for 3.11-rc4
Nothing major, some gadget fixes, some new device ids, a new tiny
driver for the ANT+ USB device, and a number of fixes for the mos7840
driver that were much needed"
* tag 'usb-3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: ftdi_sio: add more RT Systems ftdi devices
usb: chipidea: fix the build error with randconfig
usb: chipidea: cast PORTSC_PTS and DEVLC_PTS macros
usb: gadget: udc-core: fix the typo of udc state attribute
usb: gadget: f_phonet: remove unused preprocessor conditional
usb: gadget: multi: fix error return code in cdc_do_config()
USB: mos7840: fix pointer casts
USB: mos7840: fix race in led handling
USB: mos7840: fix device-type detection
USB: mos7840: fix race in register handling
USB: serial: add driver for Suunto ANT+ USB device
usb: gadget: free opts struct on error recovery
usb: gadget: ether: put_usb_function on unbind
usb: musb: fix resource passed from glue layer to musb
Here are 4 tiny tty and serial driver fixes for 3.11-rc4.
Nothing big, a refcount leak, a module alias fix, and two fixes to the
mxs-auart serial driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlH4ELoACgkQMUfUDdst+yktaACg1NxfFkjuz7A8uG7sST5pGJPb
+K8AoKmTPl0hGXOWEdgXdCnCmL+B223g
=u0GE
-----END PGP SIGNATURE-----
Merge tag 'tty-3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are 4 tiny tty and serial driver fixes for 3.11-rc4.
Nothing big, a refcount leak, a module alias fix, and two fixes to the
mxs-auart serial driver"
* tag 'tty-3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: arc_uart: Fix module alias
tty_port: Fix refcounting leak in tty_port_tty_hangup()
serial/mxs-auart: increase time to wait for transmitter to become idle
serial/mxs-auart: fix race condition in interrupt handler
Mutex can not be released unless all hid_device members are properly
initialized. Otherwise it would result in a race condition that can
cause NULL pointer kernel panic issue in hidraw_open where it uses
uninitialized 'list' member in list_add_tail().
Signed-off-by: Yonghua Zheng <younghua.zheng@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
If kzalloc() fails for `img' then we are going to leak the memory
for `out'. We are freeing the memory of all the tx/rx transfers
but the tx/rx buf pointers will be NULL if we drop out earlier.
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Commit 621a0147d5 ("ARM: 7757/1: mm:
don't flush icache in switch_mm with hardware broadcasting") breaks
the boot on OMAP2430SDP with omap2plus_defconfig. Tracked to an
undefined instruction abort from the CP15 read in
cache_ops_need_broadcast(). It turns out that gcc 4.5 reorders the
extended CP15 read above the is_smp() test. This breaks ARM1136 r0
cores, since they don't support several CP15 registers that later ARM
cores do. ARM1136JF-S TRM section 3.2.1 "Register allocation" has the
details.
So mark the extended CP15 read as clobbering memory, which prevents
the compiler from reordering it before the is_smp() test. Russell
states that the code generated from this approach is preferable to
marking the inline asm as volatile. Remove the existing condition
code clobber as it's obsolete, per Nico's post:
http://www.spinics.net/lists/arm-kernel/msg261208.html
This patch is a collaboration with Will Deacon and Russell King.
Comments from Paul Walmsley:
Russell, if you accept this one, might you also add Will's ack from the lists:
Comments from Paul Walmsley:
I'd also be obliged if you could add a Cc: line for Jonathan Austin, since he helped test:
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Tony Lindgren <tony@atomide.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Jonathan Austin <jonathan.austin@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The name changed in response to review comments for the nvic irqchip
driver when the original name was already accepted into Russell King's
tree.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
d8b51c11ff [ASoC: ac97c: Use
module_platform_driver()] broke the build:
CC sound/soc/au1x/ac97c.o
/home/ralf/src/linux/upstream-sfr/sound/soc/au1x/ac97c.c:344:1: error: expected identifier or ‘(’ before ‘&’ token
/home/ralf/src/linux/upstream-sfr/sound/soc/au1x/ac97c.c:344:1: error: pasting "__initcall_" and "&" does not give a valid preprocessing token
/home/ralf/src/linux/upstream-sfr/sound/soc/au1x/ac97c.c:344:1: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘&’ token
/home/ralf/src/linux/upstream-sfr/sound/soc/au1x/ac97c.c:344:1: error: expected identifier or ‘(’ before ‘&’ token
/home/ralf/src/linux/upstream-sfr/sound/soc/au1x/ac97c.c:344:1: error: pasting "__exitcall_" and "&" does not give a valid preprocessing token
/home/ralf/src/linux/upstream-sfr/sound/soc/au1x/ac97c.c:344:1: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘&’ token
/home/ralf/src/linux/upstream-sfr/sound/soc/au1x/ac97c.c:334:31: warning: ‘au1xac97c_driver’ defined but not used [-Wunused-variable]
make[5]: *** [sound/soc/au1x/ac97c.o] Error 1
make[4]: *** [sound/soc/au1x] Error 2
make[3]: *** [sound/soc] Error 2
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Calling cma_save_ib_info() for CM SIDR REQs results in a crash
accessing an invalid path record pointer.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
If a application is using AF_IB with a UD QP, but does not provide any
private data, we will end up accessing invalid memory. Check for this
case and handle it appropriately.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Fix to return -ENOMEM from the ioremap error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the mvneta driver is compiled as module, the clock is disabled before
it's loading. This will reset the registers values and all configuration
made by the bootloader.
This patch sets the "sgmii serdes configuration" register to a magical value
found in:
https://github.com/yellowback/ubuntu-precise-armadaxp/blob/master/arch/arm/mach-armadaxp/armada_xp_family/ctrlEnv/mvCtrlEnvLib.c
With this change, the interrupts are working/generated and ethernet is
working.
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the mvneta driver is compiled, it'll be loaded with clocks disabled.
This implies that the clocks should be enabled again before any register
access or it'll hang.
To fix it:
- enable clock earlier
- move timer callback after setting timer.data
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
On Mon, 2013-07-29 at 08:30 -0700, Eric Dumazet wrote:
> On Mon, 2013-07-29 at 13:09 +0100, Luis Henriques wrote:
>
> >
> > I confirm that I can't reproduce the issue using this patch.
> >
>
> Thanks, I'll send a polished patch, as this one had an error if
> build_skb() returns NULL (in case sk_buff allocation fails)
Please try the following patch : It should use 2K frags instead of 4K
for normal 1500 mtu
Thanks !
[PATCH] atl1c: use custom skb allocator
We had reports ( https://bugzilla.kernel.org/show_bug.cgi?id=54021 )
that using high order pages for skb allocations is problematic for atl1c
We do not know exactly what the problem is, but we suspect that crossing
4K pages is not well supported by this hardware.
Use a custom allocator, using page allocator and 2K fragments for
optimal stack behavior. We might make this allocator generic
in future kernels.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Luis Henriques <luis.henriques@canonical.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Upon some code refactoring, a hunk was missed. This was fixed for
next, but missed the current trees, and hasn't yet been merged by Dave
Airlie. It is fixed in:
commit 907b28c56e
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Jul 19 20:36:52 2013 +0100
drm/i915: Colocate all GT access routines in the same file
It is introduced by:
commit 181d1b9e31
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Sun Jul 21 13:16:24 2013 +0200
drm/i915: fix up gt init sequence fallout
Reported-by: Dave Jones <davej@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Currently, it is not possible to use neither NLM_F_EXCL nor
NLM_F_REPLACE from genetlink. This is due to this checking in
genl_family_rcv_msg:
if (nlh->nlmsg_flags & NLM_F_DUMP)
NLM_F_DUMP is NLM_F_MATCH|NLM_F_ROOT. Thus, if NLM_F_EXCL or
NLM_F_REPLACE flag is set, genetlink believes that you're
requesting a dump and it calls the .dumpit callback.
The solution that I propose is to refine this checking to
make it stricter:
if ((nlh->nlmsg_flags & NLM_F_DUMP) == NLM_F_DUMP)
And given the combination NLM_F_REPLACE and NLM_F_EXCL does
not make sense to me, it removes the ambiguity.
There was a patch that tried to fix this some time ago (0ab03c2
netlink: test for all flags of the NLM_F_DUMP composite) but it
tried to resolve this ambiguity in *all* existing netlink subsystems,
not only genetlink. That patch was reverted since it broke iproute2,
which is using NLM_F_ROOT to request the dump of the routing cache.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is inspired by a5cc68f3d6 "af_key: fix info leaks in notify
messages". There are some struct members which don't get initialized
and could disclose small amounts of private information.
Acked-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Loading a firmware into a target is typically called firmware
download, not firmware upload. So we rename the netlink API to
NFC_CMD_FW_DOWNLOAD in order to avoid any terminology confusion from
userspace.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Building cma.o triggers this gcc warning:
drivers/infiniband/core/cma.c: In function ‘rdma_resolve_addr’:
drivers/infiniband/core/cma.c:465:23: warning: ‘port’ may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/infiniband/core/cma.c:426:5: note: ‘port’ was declared here
This is a false positive, as "port" will always be initialized if we're
at "found". But if we assign to "id_priv->id.port_num" directly, we can
drop "port". That will, obviously, silence gcc.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Don't test for having link and let hardware deal with this situation.
Without this patch I see a machine running an -rt patched Linux being
stuck in sch_direct_xmit when it looses link while there is still a
packet to be sent. In this case the fec_enet_start_xmit routine returned
NETDEV_TX_BUSY which makes the network stack reschedule the packet and
so sch_direct_xmit calls fec_enet_start_xmit again.
I failed to reproduce a complete hang without -rt, but I think the
problem exists there, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit bca1935ccd, which removes variables
nes_tcp_state_str and nes_iwarp_state_str, assuming that they aren't
defined. However, they are defined within a #ifdef NES_DEBUG statement,
which if enabled causes "defined but not used" compiler warning, when
the variables are removed.
Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Alex writes:
- more fixes for SI dpm
- fix DP on some rv6xx boards
* 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/dpm: re-enable cac control on SI
drm/radeon/dpm: fix calculations in si_calculate_leakage_for_v_and_t_formula
drm: fix 64 bit drm fixed point helpers
drm/radeon/atom: initialize more atom interpretor elements to 0
drivers/gpio/gpio-msm-v1.c: In function 'gpio_msm_v1_probe':
drivers/gpio/gpio-msm-v1.c:656:2:
error: implicit declaration of function 'IS_ERR'
[-Werror=implicit-function-declaration]
drivers/gpio/gpio-msm-v1.c:657:3:
error: implicit declaration of function 'PTR_ERR'
[-Werror=implicit-function-declaration]
This driver failed to compile after commit 68515bb
(gpio_msm: Convert to use devm_ioremap_resource,
2013-06-10).
Acked-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
