On some boxes that don't have PS/2 mice connected at startup BIOS
completely disables AUX port and attempts to access it result in
hosed keyboard. Historically we do not trust ACPI/PNP data on
i386 and try to poke AUX port even if we did not find an active
PNP node for it. However in cases when BIOS writers got KBD port
properly described we can assume that they did the right thing
for AUX port as well.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
These serial touchscreens are found on some Fujitsu lifebook
P-series laptops, and the B6210. Using this requires a new
version of inputattach and doing:
inputattach -fjt /dev/ttyS0
Big thanks to Stephen Hemminger for testing it and making it
work on his B6210 laptop.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Pendown status from the PENIRQ pin is currently read only at the beginning
of a sample set. If the pen is lifted just after sampling has began then
sampled values become wrong.
This patch adds an optional platform penirq_recheck_delay attribute. If
non-zero, samples are only reported to the input subsystem if PENIRQ is
still active that long after the samples taken.
Signed-off-by: Semih Hazar <semih.hazar@indefia.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
The ads7846 driver has support for filtering, but when the chip gets
deselected between samples this causes noise. This patch adds support
for an optional settling delay time, so that two consecutive samples
will be taken with the specified delay time apart. This ensures that
the chip won't be deselected, so the noise won't appear.
Filtering can still be done, but will have less work to do since each
time a new sample is taken the same delay applies.
Signed-off-by: Semih Hazar <semih.hazar@indefia.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Export LEDs on Xbox360 pad via led subsystem as a single device in
/sys/class/leds/xpad[0-9]+.
Xbox360 pad has four leds, which form a circle. Unfortunately the leds
can't be controlled independently and can only display a predefined
set of patterns (for example one is turned on wile others are off or
a rotating pattern - 1-2-3-4). To activate a pattern one needs to send
a specific command to the device (see http://www.free60.org/wiki/Gamepad).
Led subsystem allows us to set brightness, but there is nothing like
brightness on this device. So brightness is actually interpreted as
the command (only values between 0 and 14 are accepted).
Signed-off-by: Jan Kratochvil <honza@jikos.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Currently, the freezer treats all tasks as freezable, except for the kernel
threads that explicitly set the PF_NOFREEZE flag for themselves. This
approach is problematic, since it requires every kernel thread to either
set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't
care for the freezing of tasks at all.
It seems better to only require the kernel threads that want to or need to
be frozen to use some freezer-related code and to remove any
freezer-related code from the other (nonfreezable) kernel threads, which is
done in this patch.
The patch causes all kernel threads to be nonfreezable by default (ie. to
have PF_NOFREEZE set by default) and introduces the set_freezable()
function that should be called by the freezable kernel threads in order to
unset PF_NOFREEZE. It also makes all of the currently freezable kernel
threads call set_freezable(), so it shouldn't cause any (intentional)
change of behaviour to appear. Additionally, it updates documentation to
describe the freezing of tasks more accurately.
[akpm@linux-foundation.org: build fixes]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Nigel Cunningham <nigel@nigel.suspend2.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sysfs is now completely out of driver/module lifetime game. After
deletion, a sysfs node doesn't access anything outside sysfs proper,
so there's no reason to hold onto the attribute owners. Note that
often the wrong modules were accounted for as owners leading to
accessing removed modules.
This patch kills now unnecessary attribute->owner. Note that with
this change, userland holding a sysfs node does not prevent the
backing module from being unloaded.
For more info regarding lifetime rule cleanup, please read the
following message.
http://article.gmane.org/gmane.linux.kernel/510293
(tweaked by Greg to not delete the field just yet, to make it easier to
merge things properly.)
Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/input/serio/serio_raw.c: In function 'serio_raw_read':
drivers/input/serio/serio_raw.c:163: warning: 'c' may be used uninitialized in this function
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
WWW/Homepage key on Microsoft-compatible keyboards generates KEY_WWW
when connected via PS/2 port but KEY_HOMEPAGE when connected via USB.
This patch changes mapping in atkbd to match one in HID driver.
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Acked-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
This patch adds support for IRTOUCHSYSTEMS (or UNITOP) infrared touchscreens.
The touchscreen sends data in 8-byte packets.
BYTE 0 - unknown meaning, seen only one value: 0x54
BYTE 1 - unknown meaning, 3 lowest bits indicate touch state
values seen: 0x81, 0x82 or 0x83
bit 0 = set if the screen is touched and was not touched before (touch
bit 1 = set if the screen is touched and was touched (dragging)
bit 2 = set if the touch was ended (release)
BYTES 2 and 3 - X position, high-order-byte first, range = 0 to 0x0FFF
BYTES 4 and 5 - Y position, high-order-byte first, range = 0 to 0x0FFF
BYTE 6 - unknown meaning, seen only one value: 0xFF
BYTE 7 - unknown meaning, seen only one value: 0x00
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Make the driver report Y/RY up as positive value and down as negative. Also
make DPAD mapping the same as classic xpad.
Reported-by: Brian Magnuson <bdmagnuson@gmail.com>
Tested-by: Jan Kratochvil <honza@jikos.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Adds support for simulating a mouse using GPIO lines. The driver
needs an appropriate platform device to be created by architecture
code.
The driver has been tested on AT32AP7000 microprocessor using the
ATSTK1000 development board.
Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Implement getkeycode and setkeycode methods for the device so
EVIOCGKEYCODE and EVIOCSKEYCODE ioctls will work.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Add support to wistron_btns for leds that come with the multimedia keys.
Mail and wifi leds are supported, on laptops which have them.
Depending on the laptop, wifi subsystem may control just the led, or both
the led and the wifi card. Wifi led interface is activated only for the
former type of laptops, as the latter type is already managed. Leds are
controled by the interface in /sys/class/leds.
Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Reduces the polling frequency from 10 Hz to 2 Hz, which should be less a burden
for laptops wrt energy saving. As it is multimedia keys, 500ms (maximum) of
latency should be still fine for the user. In order to keep fluent the feeling
when the user is pressing several keys in a raw (such as changing the volume),
the frequency is increased for a short duration after a key is pressed.
Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Function keys (also called macro keys) code corrected. Using a
lastMacro variable to keep track of key currently pressed. This
ensures proper resetting when dragging the pen in the drawing
area or to another key. Also suppress sending pressure reports
when over the macro key area.
Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Now echo "some value" > /sys/......./somefile is also acceptable.
Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Now the old tool is remembered, and reset when a new tool is
selected via the sysfs files.
Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
To get an on - off reporting for proximity, absolute misc reports are
used. The mixture of absolute and relative reports is awkward
Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Added warnings to the points where the tablet probe may fail
Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Have to use set_bit since some bit values are over 32, and bitwise or
won't work on these. To be safe for the future too, use set_bit for all
input dev capabilities
Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Corrections to relative mode, was looking at wrong byte
Signed-off-by: Mark Vytlacil <mrv@wi.rr.com>
Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Calculation of proximity bit and of data valid bits were reversed for
stylus reports.
Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Small fix that corrects the documentation on the report byte
format produced by the mouse
Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
When setting up input device use an array to list all the buttons
instead of setting every bit separately.
Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
There is no reason to do that, just tell the compiler that
we are dealing with signed values in buffer, that's it.
Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Use maps to convert for strings to internal constants and vice versa
in aiptek's sysfs attribute methods instead of open-coding it. This
results in smaller code that is also easier to maintain.
[Rene: fix a typo - stylys instead of stylus]
Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
It makes no sense to check for NULL in attribute methods -
we do usb_set_intfdata before creating attributes and once
attributes have been removed we are guaranteed to not be
called.
Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Use attribute group to simplify error handling and reduce code.
[Rene: add missing NULL to properly terminate aiptek_attributes]
Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
They are already exported by input core; there is no need to do it twice.
Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Do not try to export via sysfs associated event device - it does not
work when evdev is a module that is loaded after aiptek; also it pokes
too deply into input core internals.
Userspace should rely on udev to set up permanent device name for
the tablet.
Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Cortron PS/2 Trackballs (700-0001A) report the 4th button using the 4th
bit of the first packet (yes, it breaks the standard PS/2 protocol).
This patch adds an extra protocol to generate BTN_SIDE based on the 4th
bit. There's no way to detect those trackballs using any kind of special
sequence, thus the protocol must be activated explicitely by writing
into 'protocol' sysfs attribute:
echo -n "cortps" > /sys/devices/platform/i8042/serio1/protocol
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Implementation is using force feedback support for memoryless devices.
Signed-off-by: Jan Kratochvil <honza@jikos.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Xbox 360 gamepad is slightly different then the previous model so it has
its own version of process_packet method. Detection of this new device
relies on USB_DEVICE_INTERFACE_PROTOCOL macro. This device got vendor
specific subclass so it can't be matched with USB_INTERFACE_INFO and
we need only one interface protocol from four availaible. It means
USB_DEVICE can't be used either.
Added xpad360_btn structure with additional buttons for x360 gamepad.
Added xtype into xpad_device structure to distinguish between different
types of xbox devices.
Signed-off-by: Jan Kratochvil <honza@jikos.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: document some of keycodes
Input: add a new EV_SW SW_RADIO event, for radio switches on laptops
Input: serio - take drv_mutex in serio_cleanup()
Input: atkbd - use printk_ratelimit for spurious ACK messages
Input: atkbd - throttle LED switching
Input: i8042 - add HP Pavilion ZT1000 to the MUX blacklist
We need to take serio->drv_mutex in serio_cleanup() to prevent the
function from being called while driver is in the middle of attaching
to a serio port. Such situation can happen with i8042 and atkbd drivers
if user rapidly presses Ctrl-Alt-Del during system startup, and leads
to kernel oops.
Reported-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
On some boxes keyboard controllers are too slow to withstand
continuous flow of requests to turn keyboard LEDs on and off
and start losing some keypresses or even all of them.
Delay executing of LED switching request if we had another one
within 50 ms thus easing load on the controller.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
This should get rid of "atkbd.c: Suprious NAK on isa0060/serio0"
messages caused by broken MUX implementation. The box does not
have external PS/2 ports and, according to documentation,
automatically disables touchpad when an external mouse is plugged
into a port replicator, so MUX mode would not work anyway.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Not directly related to x86, but I got tired of seeing these warnings on every
kconfig update when building on a non m68k box:
drivers/input/keyboard/Kconfig:170:warning: 'select' used by config symbol 'KEYBOARD_ATARI' refers to undefined symbol 'ATARI_KBD_CORE'
drivers/input/mouse/Kconfig:182:warning: 'select' used by config symbol 'MOUSE_ATARI' refers to undefined symbol 'ATARI_KBD_CORE'
I moved the definition of ATARI_KBD_CORE into drivers/input/keyboard/Kconfig
so it's always seen by Kconfig.
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
