Conflicts:
drivers/net/ethernet/chelsio/cxgb4vf/sge.c
drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
sge.c was overlapping two changes, one to use the new
__dev_alloc_page() in net-next, and one to use s->fl_pg_order in net.
ixgbe_phy.c was a set of overlapping whitespace changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Reallocation is only required for shrinking and expanding and both rely
on a mutex for synchronization and callers of rhashtable_init() are in
non atomic context. Therefore, no reason to continue passing allocation
hints through the API.
Instead, use GFP_KERNEL and add __GFP_NOWARN | __GFP_NORETRY to allow
for silent fall back to vzalloc() without the OOM killer jumping in as
pointed out by Eric Dumazet and Eric W. Biederman.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently mutex_is_held can only test locks in the that are global
since it takes no arguments. This prevents rhashtable from being
used in places where locks are lock, e.g., per-namespace locks.
This patch adds a parent field to mutex_is_held and rhashtable_params
so that local locks can be used (and tested).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The rhashtable function mutex_is_held is only used when PROVE_LOCKING
is enabled. This patch modifies netlink so that we can rhashtable.h
itself can later make mutex_is_held optional depending on PROVE_LOCKING.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Even if netlink_kernel_cfg::unbind is implemented the unbind() method is
not called, because cfg->unbind is omitted in __netlink_kernel_create().
And fix wrong argument of test_bit() and off by one problem.
At this point, no unbind() method is implemented, so there is no real
issue.
Fixes: 4f52090052 ("netlink: have netlink per-protocol bind function return an error code.")
Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Cc: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This encapsulates all of the skb_copy_datagram_iovec() callers
with call argument signature "skb, offset, msghdr->msg_iov, length".
When we move to iov_iters in the networking, the iov_iter object will
sit in the msghdr.
Having a helper like this means there will be less places to touch
during that transformation.
Based upon descriptions and patch from Al Viro.
Signed-off-by: David S. Miller <davem@davemloft.net>
The synchronize_rcu() in netlink_release() introduces unacceptable
latency. Reintroduce minimal lookup so we can drop the
synchronize_rcu() until socket destruction has been RCUfied.
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: Steinar H. Gunderson <sgunderson@bigfoot.com>
Reported-and-tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
we used to check for "nobody else could start doing anything with
that opened file" by checking that refcount was 2 or less - one
for descriptor table and one we'd acquired in fget() on the way to
wherever we are. That was race-prone (somebody else might have
had a reference to descriptor table and do fget() just as we'd
been checking) and it had become flat-out incorrect back when
we switched to fget_light() on those codepaths - unlike fget(),
it doesn't grab an extra reference unless the descriptor table
is shared. The same change allowed a race-free check, though -
we are safe exactly when refcount is less than 2.
It was a long time ago; pre-2.6.12 for ioctl() (the codepath leading
to ppp one) and 2.6.17 for sendmsg() (netlink one). OTOH,
netlink hadn't grown that check until 3.9 and ppp used to live
in drivers/net, not drivers/net/ppp until 3.1. The bug existed
well before that, though, and the same fix used to apply in old
location of file.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Silences the following sparse warnings:
net/netlink/af_netlink.c:2926:21: warning: context imbalance in 'netlink_seq_start' - wrong count at exit
net/netlink/af_netlink.c:2972:13: warning: context imbalance in 'netlink_seq_stop' - unexpected unlock
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
netlink doesn't set any network header offset thus when the skb is
being passed to tap devices via dev_queue_xmit_nit(), it emits klog
false positives due to it being unset like:
...
[ 124.990397] protocol 0000 is buggy, dev nlmon0
[ 124.990411] protocol 0000 is buggy, dev nlmon0
...
So just reset the network header before passing to the device; for
packet sockets that just means nothing will change - mac and net
offset hold the same value just as before.
Reported-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Although RCU protection would be possible during diag dump, doing
so allows for concurrent table mutations which can render the
in-table offset between individual Netlink messages invalid and
thus cause legitimate sockets to be skipped in the dump.
Since the diag dump is relatively low volume and consistency is
more important than performance, the table mutex is held during
dump.
Reported-by: Andrey Wagin <avagin@gmail.com>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Fixes: e341694e3e ("netlink: Convert netlink_lookup() to use RCU protected hash table")
Signed-off-by: David S. Miller <davem@davemloft.net>
With netlink_lookup() conversion to RCU, we need to use appropriate
rcu dereference in netlink_seq_socket_idx() & netlink_seq_next()
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: e341694e3e ("netlink: Convert netlink_lookup() to use RCU protected hash table")
Signed-off-by: David S. Miller <davem@davemloft.net>
Heavy Netlink users such as Open vSwitch spend a considerable amount of
time in netlink_lookup() due to the read-lock on nl_table_lock. Use of
RCU relieves the lock contention.
Makes use of the new resizable hash table to avoid locking on the
lookup.
The hash table will grow if entries exceeds 75% of table size up to a
total table size of 64K. It will automatically shrink if usage falls
below 30%.
Also splits nl_table_lock into a separate mutex to protect hash table
mutations and allow synchronize_rcu() to sleep while waiting for readers
during expansion and shrinking.
Before:
9.16% kpktgend_0 [openvswitch] [k] masked_flow_lookup
6.42% kpktgend_0 [pktgen] [k] mod_cur_headers
6.26% kpktgend_0 [pktgen] [k] pktgen_thread_worker
6.23% kpktgend_0 [kernel.kallsyms] [k] memset
4.79% kpktgend_0 [kernel.kallsyms] [k] netlink_lookup
4.37% kpktgend_0 [kernel.kallsyms] [k] memcpy
3.60% kpktgend_0 [openvswitch] [k] ovs_flow_extract
2.69% kpktgend_0 [kernel.kallsyms] [k] jhash2
After:
15.26% kpktgend_0 [openvswitch] [k] masked_flow_lookup
8.12% kpktgend_0 [pktgen] [k] pktgen_thread_worker
7.92% kpktgend_0 [pktgen] [k] mod_cur_headers
5.11% kpktgend_0 [kernel.kallsyms] [k] memset
4.11% kpktgend_0 [openvswitch] [k] ovs_flow_extract
4.06% kpktgend_0 [kernel.kallsyms] [k] _raw_spin_lock
3.90% kpktgend_0 [kernel.kallsyms] [k] jhash2
[...]
0.67% kpktgend_0 [kernel.kallsyms] [k] netlink_lookup
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use PAGE_ALIGNED(...) instead of IS_ALIGNED(..., PAGE_SIZE).
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes the bool variable 'pass'.
If the swith case exist return true or return false.
Signed-off-by: Varka Bhadram <varkab@cdac.in>
Signed-off-by: David S. Miller <davem@davemloft.net>
netlink_dump() returns a negative errno value on error. Until now,
netlink_recvmsg() directly recorded that negative value in sk->sk_err, but
that's wrong since sk_err takes positive errno values. (This manifests as
userspace receiving a positive return value from the recv() system call,
falsely indicating success.) This bug was introduced in the commit that
started checking the netlink_dump() return value, commit b44d211 (netlink:
handle errors from netlink_dump()).
Multithreaded Netlink dumps are one way to trigger this behavior in
practice, as described in the commit message for the userspace workaround
posted here:
http://openvswitch.org/pipermail/dev/2014-June/042339.html
This commit also fixes the same bug in netlink_poll(), introduced in commit
cd1df525d (netlink: add flow control for memory mapped I/O).
Signed-off-by: Ben Pfaff <blp@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch changes the prototype of the do_one_broadcast() method so that it will return void.
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
include/net/inetpeer.h
net/ipv6/output_core.c
Changes in net were fixing bugs in code removed in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
It was possible to get a setuid root or setcap executable to write to
it's stdout or stderr (which has been set made a netlink socket) and
inadvertently reconfigure the networking stack.
To prevent this we check that both the creator of the socket and
the currentl applications has permission to reconfigure the network
stack.
Unfortunately this breaks Zebra which always uses sendto/sendmsg
and creates it's socket without any privileges.
To keep Zebra working don't bother checking if the creator of the
socket has privilege when a destination address is specified. Instead
rely exclusively on the privileges of the sender of the socket.
Note from Andy: This is exactly Eric's code except for some comment
clarifications and formatting fixes. Neither I nor, I think, anyone
else is thrilled with this approach, but I'm hesitant to wait on a
better fix since 3.15 is almost here.
Note to stable maintainers: This is a mess. An earlier series of
patches in 3.15 fix a rather serious security issue (CVE-2014-0181),
but they did so in a way that breaks Zebra. The offending series
includes:
commit aa4cf9452f
Author: Eric W. Biederman <ebiederm@xmission.com>
Date: Wed Apr 23 14:28:03 2014 -0700
net: Add variants of capable for use on netlink messages
If a given kernel version is missing that series of fixes, it's
probably worth backporting it and this patch. if that series is
present, then this fix is critical if you care about Zebra.
Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
the local variable ops and n_ops were just read out from family,
and not changed, hence no need to assign back.
Validation functions should operate on const parameters and not
change anything.
Signed-off-by: Cheng Renquan <crquan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
drivers/net/ethernet/altera/altera_sgdma.c
net/netlink/af_netlink.c
net/sched/cls_api.c
net/sched/sch_api.c
The netlink conflict dealt with moving to netlink_capable() and
netlink_ns_capable() in the 'net' tree vs. supporting 'tc' operations
in non-init namespaces. These were simple transformations from
netlink_capable to netlink_ns_capable.
The Altera driver conflict was simply code removal overlapping some
void pointer cast cleanups in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
It is possible by passing a netlink socket to a more privileged
executable and then to fool that executable into writing to the socket
data that happens to be valid netlink message to do something that
privileged executable did not intend to do.
To keep this from happening replace bare capable and ns_capable calls
with netlink_capable, netlink_net_calls and netlink_ns_capable calls.
Which act the same as the previous calls except they verify that the
opener of the socket had the desired permissions as well.
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
netlink_net_capable - The common case use, for operations that are safe on a network namespace
netlink_capable - For operations that are only known to be safe for the global root
netlink_ns_capable - The general case of capable used to handle special cases
__netlink_ns_capable - Same as netlink_ns_capable except taking a netlink_skb_parms instead of
the skbuff of a netlink message.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
netlink_capable is a static internal function in af_netlink.c and we
have better uses for the name netlink_capable.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Call the per-protocol unbind function rather than bind function on
NETLINK_DROP_MEMBERSHIP in netlink_setsockopt().
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Have the netlink per-protocol optional bind function return an int error code
rather than void to signal a failure.
This will enable netlink protocols to perform extra checks including
capabilities and permissions verifications when updating memberships in
multicast groups.
In netlink_bind() and netlink_setsockopt() the call to the per-protocol bind
function was moved above the multicast group update to prevent any access to
the multicast socket groups before checking with the per-protocol bind
function. This will enable the per-protocol bind function to be used to check
permissions which could be denied before making them available, and to avoid
the messy job of undoing the addition should the per-protocol bind function
fail.
The netfilter subsystem seems to be the only one currently using the
per-protocol bind function.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several spots in the kernel perform a sequence like:
skb_queue_tail(&sk->s_receive_queue, skb);
sk->sk_data_ready(sk, skb->len);
But at the moment we place the SKB onto the socket receive queue it
can be consumed and freed up. So this skb->len access is potentially
to freed up memory.
Furthermore, the skb->len can be modified by the consumer so it is
possible that the value isn't accurate.
And finally, no actual implementation of this callback actually uses
the length argument. And since nobody actually cared about it's
value, lots of call sites pass arbitrary values in such as '0' and
even '1'.
So just remove the length argument from the callback, that way there
is no confusion whatsoever and all of these use-after-free cases get
fixed as a side effect.
Based upon a patch by Eric Dumazet and his suggestion to audit this
issue tree-wide.
Signed-off-by: David S. Miller <davem@davemloft.net>
One known problem with netlink is the fact that NLMSG_GOODSIZE is
really small on PAGE_SIZE==4096 architectures, and it is difficult
to know in advance what buffer size is used by the application.
This patch adds an automatic learning of the size.
First netlink message will still be limited to ~4K, but if user used
bigger buffers, then following messages will be able to use up to 16KB.
This speedups dump() operations by a large factor and should be safe
for legacy applications.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Thomas Graf <tgraf@suug.ch>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
drivers/net/wireless/ath/ath9k/recv.c
drivers/net/wireless/mwifiex/pcie.c
net/ipv6/sit.c
The SIT driver conflict consists of a bug fix being done by hand
in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper
was created (netdev_alloc_pcpu_stats()) which takes care of this.
The two wireless conflicts were overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
netlink_sendmsg() was changed to prevent non-root processes from sending
messages with dst_pid != 0.
netlink_connect() however still only checks if nladdr->nl_groups is set.
This patch modifies netlink_connect() to check for the same condition.
Signed-off-by: Mike Pecovnik <mike.pecovnik@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ERROR: spaces required and "(foo*)" should be "(foo *)"
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a follow-up patch to f3d3342602 ("net: rework recvmsg
handler msg_name and msg_namelen logic").
DECLARE_SOCKADDR validates that the structure we use for writing the
name information to is not larger than the buffer which is reserved
for msg->msg_name (which is 128 bytes). Also use DECLARE_SOCKADDR
consistently in sendmsg code paths.
Signed-off-by: Steffen Hurrle <steffen@hurrle.net>
Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesse Gross says:
====================
[GIT net-next] Open vSwitch
Open vSwitch changes for net-next/3.14. Highlights are:
* Performance improvements in the mechanism to get packets to userspace
using memory mapped netlink and skb zero copy where appropriate.
* Per-cpu flow stats in situations where flows are likely to be shared
across CPUs. Standard flow stats are used in other situations to save
memory and allocation time.
* A handful of code cleanups and rationalization.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
An insufficent ring frame size configuration can lead to an
unnecessary skb allocation for every Netlink message. Check frame
size before taking the queue lock and allocating the skb and
re-check with lock to be safe.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Reviewed-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Allocates a new sk_buff large enough to cover the specified payload
plus required Netlink headers. Will check receiving socket for
memory mapped i/o capability and use it if enabled. Will fall back
to non-mapped skb if message size exceeds the frame size of the ring.
Signed-of-by: Thomas Graf <tgraf@suug.ch>
Reviewed-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Cleanups in netlink_tap code
* remove unused function netlink_clear_multicast_users
* make local function static
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to facilitate development for netlink protocol dissector,
fill the unused field skb->pkt_type of the cloned skb with a hint
of the address space of the new owner (receiver) socket in the
notion of "to kernel" resp. "to user".
At the time we invoke __netlink_deliver_tap_skb(), we already have
set the new skb owner via netlink_skb_set_owner_r(), so we can use
that for netlink_is_kernel() probing.
In normal PF_PACKET network traffic, this field denotes if the
packet is destined for us (PACKET_HOST), if it's broadcast
(PACKET_BROADCAST), etc.
As we only have 3 bit reserved, we can use the value (= 6) of
PACKET_FASTROUTE as it's _not used_ anywhere in the whole kernel
and not supported anywhere, and packets of such type were never
exposed to user space, so there are no overlapping users of such
kind. Thus, as wished, that seems the only way to make both
PACKET_* values non-overlapping and therefore device agnostic.
By using those two flags for netlink skbs on nlmon devices, they
can be made available and picked up via sll_pkttype (previously
unused in netlink context) in struct sockaddr_ll. We now have
these two directions:
- PACKET_USER (= 6) -> to user space
- PACKET_KERNEL (= 7) -> to kernel space
Partial `ip a` example strace for sa_family=AF_NETLINK with
detected nl msg direction:
syscall: direction:
sendto(3, ...) = 40 /* to kernel */
recvmsg(3, ...) = 3404 /* to user */
recvmsg(3, ...) = 1120 /* to user */
recvmsg(3, ...) = 20 /* to user */
sendto(3, ...) = 40 /* to kernel */
recvmsg(3, ...) = 168 /* to user */
recvmsg(3, ...) = 144 /* to user */
recvmsg(3, ...) = 20 /* to user */
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Jakub Zawadzki <darkjames-ws@darkjames.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
We should also deliver packets to nlmon devices when we are in
netlink_unicast_kernel(), and only one of the {src,dst} sockets
is user sk and the other one kernel sk. That's e.g. the case in
netlink diag, netlink route, etc. Still, forbid to deliver messages
from kernel to kernel sks.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Jakub Zawadzki <darkjames-ws@darkjames.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
The pmcraid driver is abusing the genetlink API and is using its
family ID as the multicast group ID, which is invalid and may
belong to somebody else (and likely will.)
Make it use the correct API, but since this may already be used
as-is by userspace, reserve a family ID for this code and also
reserve that group ID to not break userspace assumptions.
My previous patch broke event delivery in the driver as I missed
that it wasn't using the right API and forgot to update it later
in my series.
While changing this, I noticed that the genetlink code could use
the static group ID instead of a strcmp(), so also do that for
the VFS_DQUOT family.
Cc: Anil Ravindranath <anil_ravindranath@pmc-sierra.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/netlink/genetlink.c: In function ‘genl_validate_assign_mc_groups’:
net/netlink/genetlink.c:217: warning: ‘err’ may be used uninitialized in this
function
Commit 2a94fe48f3 ("genetlink: make multicast
groups const, prevent abuse") split genl_register_mc_group() in multiple
functions, but dropped the initialization of err.
Initialize err to zero to fix this.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unfortunately, I introduced a tremendously stupid bug into
genlmsg_multicast() when doing all those multicast group
changes: it adjusts the group number, but then passes it
to genlmsg_multicast_netns() which does that again.
Somehow, my tests failed to catch this, so add a warning
into genlmsg_multicast_netns() and remove the offending
group ID adjustment.
Also add a warning to the similar code in other functions
so people who misuse them are more loudly warned.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch now always passes msg->msg_namelen as 0. recvmsg handlers must
set msg_namelen to the proper size <= sizeof(struct sockaddr_storage)
to return msg_name to the user.
This prevents numerous uninitialized memory leaks we had in the
recvmsg handlers and makes it harder for new code to accidentally leak
uninitialized memory.
Optimize for the case recvfrom is called with NULL as address. We don't
need to copy the address at all, so set it to NULL before invoking the
recvmsg handler. We can do so, because all the recvmsg handlers must
cope with the case a plain read() is called on them. read() also sets
msg_name to NULL.
Also document these changes in include/linux/net.h as suggested by David
Miller.
Changes since RFC:
Set msg->msg_name = NULL if user specified a NULL in msg_name but had a
non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't
affect sendto as it would bail out earlier while trying to copy-in the
address. It also more naturally reflects the logic by the callers of
verify_iovec.
With this change in place I could remove "
if (!uaddr || msg_sys->msg_namelen == 0)
msg->msg_name = NULL
".
This change does not alter the user visible error logic as we ignore
msg_namelen as long as msg_name is NULL.
Also remove two unnecessary curly brackets in ___sys_recvmsg and change
comments to netdev style.
Cc: David Miller <davem@davemloft.net>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Register generic netlink multicast groups as an array with
the family and give them contiguous group IDs. Then instead
of passing the global group ID to the various functions that
send messages, pass the ID relative to the family - for most
families that's just 0 because the only have one group.
This avoids the list_head and ID in each group, adding a new
field for the mcast group ID offset to the family.
At the same time, this allows us to prevent abusing groups
again like the quota and dropmon code did, since we can now
check that a family only uses a group it owns.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This doesn't really change anything, but prepares for the
next patch that will change the APIs to pass the group ID
within the family, rather than the global group ID.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's no reason to have the family pointer there since it
can just be passed internally where needed, so remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are no users of this API remaining, and we'll soon
change group registration to be static (like ops are now)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The quota code is abusing the genetlink API and is using
its family ID as the multicast group ID, which is invalid
and may belong to somebody else (and likely will.)
Make the quota code use the correct API, but since this
is already used as-is by userspace, reserve a family ID
for this code and also reserve that group ID to not break
userspace assumptions.
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The drop monitor code is abusing the genetlink API and is
statically using the generic netlink multicast group 1, even
if that group belongs to somebody else (which it invariably
will, since it's not reserved.)
Make the drop monitor code use the proper APIs to reserve a
group ID, but also reserve the group id 1 in generic netlink
code to preserve the userspace API. Since drop monitor can
be a module, don't clear the bit for it on unregistration.
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As suggested by David Miller, make genl_register_family_with_ops()
a macro and pass only the array, evaluating ARRAY_SIZE() in the
macro, this is a little safer.
The openvswitch has some indirection, assing ops/n_ops directly in
that code. This might ultimately just assign the pointers in the
family initializations, saving the struct genl_family_and_ops and
code (once mcast groups are handled differently.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
