Set the CRYPTO_ALG_KERN_DRIVER_ONLY flag to all algorithms exposed by
the qce driver, since they are all hardware accelerated, accessible
through a kernel driver only, and not available directly to userspace.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use '__skb_put_data()' instead of rewritting it.
This improves readability.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Release all allocated memory if sha type is invalid:
In ccp_run_sha_cmd, if the type of sha is invalid, the allocated
hmac_buf should be released.
v2: fix the goto.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To avoid missing arm64 specific warnings that get introduced
in this driver, allow compile-testing on all 64-bit architectures.
The only actual arm64 specific code in this driver is an open-
coded 128 bit MMIO write. On non-arm64 the same can be done
using memcpy_toio. What I also noticed is that the mmio store
(either one) is not endian-safe, this will only work on little-
endian configurations, so I also add a Kconfig dependency on
that, regardless of the architecture.
Finally, a depenndecy on CONFIG_64BIT is needed because of the
writeq().
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the EIP196, which is an EIP197 derivative
that has no classification hardware and a simplified record cache.
The patch has been tested with the eip196b-ie and eip197c-iewxkbc
configurations on the Xilinx VCU118 development board as well as on the
Macchiatobin board (Marvell A8K - EIP197b-ieswx), including the crypto
extra tests.
Note that this patchset applies on top of the earlier submitted
"Add support for eip197f_iewc" series.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support to get microcode information in VF from PF via mailbox
message.
Signed-off-by: Nagadheeraj Rottela <rnagadheeraj@marvell.com>
Reviewed-by: Srikanth Jampala <jsrikanth@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The current driver assumes one dedicated ring interrupt controller per
ring. However, some existing EIP(1)97 HW has less ring AIC's than rings.
This patch allows the driver to work with such HW by detecting how many
ring AIC's are present and restricting the number of rings it *uses* by
the number of ring AIC's present. This allows it to at least function.
(optimization for the future: add ring dispatch functionality in the
interrupt service routine such that multiple rings can be supported from
one ring AIC, allowing all rings to be used)
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for large EIP197's with a 256 bit wide internal
bus, which affects the format of the result descriptor due to internal
alignment requirements.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for rfc4309(ccm(aes)) for use with IPsec ESP
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for rfc4543(gcm(aes)) - i.e. AES-GMAC - for use
with IPsec ESP
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for rfc4106(gcm(aes)) for use with IPsec ESP
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixed a corner case admin RAM probing issue witnessed on the
Xilinx VCU118 FPGA development board with an EIP197 configuration with
4096 words of admin RAM, of which only 2050 were recognised.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch corrects an error in the Transform Record Cache initialization
code that was causing intermittent stability problems on the Macchiatobin
board.
Unfortunately, due to HW platform specifics, the problem could not happen
on the main development platform, being the VCU118 Xilinx development
board. And since it was a problem with hash table access, it was very
dependent on the actual physical context record DMA buffers being used,
i.e. with some (bad) luck it could seemingly work quit stable for a while.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Self test failures are due to wrong output IV. This patch fixes this
issue by copying back output IV into skcipher request.
Signed-off-by: Nagadheeraj Rottela <rnagadheeraj@marvell.com>
Reviewed-by: Srikanth Jampala <jsrikanth@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Check if device supports assoclen to solve hung task timeout error when
extra tests are enabled. Return -EINVAL if assoclen is not supported.
Check authsize to return -EINVAL if authentication tag size is invalid.
Change blocksize to 1 to match with generic implementation.
Signed-off-by: Nagadheeraj Rottela <rnagadheeraj@marvell.com>
Reported-by: Mallesham Jatharakonda <mallesham.jatharakonda@oneconvergence.com>
Suggested-by: Mallesham Jatharakonda <mallesham.jatharakonda@oneconvergence.com>
Reviewed-by: Srikanth Jampala <jsrikanth@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the authenc(hmac(sha224),cbc(des)),
authenc(hmac(sha256),cbc(des)), authenc(hmac(sha384),cbc(des))
and authenc(hmac(sha512),cbc(des)) aead's
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the authenc(hmac(sha224),cbc(des3_ede)),
authenc(hmac(sha256),cbc(des3_ede)), authenc(hmac(sha384),cbc(des3_ede))
and authenc(hmac(sha512),cbc(des3_ede)) aead's
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the authenc(hmac(sha1),cbc(des)) aead
changes since v1:
- rebased on top of DES changes made to cryptodev/master
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Due to the addition of SHA3 and HMAC-SHA3 support to the inside-secure
driver, it now depends on CRYPTO_SHA3. Added reference.
changes since v1:
- added missing dependency to crypto/Kconfig
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for hmac(sha3-224), hmac(sha3-256), hmac(sha3-384)
and hmac(sha3-512) authentication algorithms.
The patch has been tested with the eip197c_iewxkbc configuration on the
Xilinx VCU118 development board, including the testmgr extra tests.
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for sha3-224, sha3-256, sha3-384 and sha3-512
basic hashes.
The patch has been tested with the eip197c_iewxkbc configuration on the
Xilinx VCU118 development board, including the testmgr extra tests.
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the authenc(hmac(sha1),cbc(sm4)),
authenc(hmac(sm3),cbc(sm4)), authenc(hmac(sha1),rfc3686(ctr(sm4))),
and authenc(hmac(sm3),rfc3686(ctr(sm4))) aead ciphersuites.
These are necessary to support IPsec according to the Chinese standard
GM/T 022-1014 - IPsec VPN specification.
Note that there are no testvectors present in testmgr for these
ciphersuites. However, considering all building blocks have already been
verified elsewhere, it is fair to assume the generic implementation to be
correct-by-construction.
The hardware implementation has been fuzzed against this generic
implementation by means of a locally modified testmgr. The intention is
to upstream these testmgr changes but this is pending other testmgr changes
being made by Eric Biggers.
The patch has been tested with the eip197c_iewxkbc configuration on the
Xilinx VCU118 development board, using the abovementioned modified testmgr
This patch applies on top of "Add support for SM4 ciphers" and needs to
be applied before "Add (HMAC) SHA3 support".
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for SM4 in (32 bit) CTR mode, i.e. skcipher
rfc3686(ctr(sm4)).
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for SM4 in CFB mode, i.e. skcipher cfb(sm4).
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for SM4 in OFB mode, i.e. skcipher ofb(sm4).
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for SM4 in CBC mode, i.e. skcipher cbc(sm4).
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for SM4 in ECB mode, i.e. skcipher ecb(sm4).
changes since v1:
- make SAFEXCEL_SM4 case entry explit, using the proper SM4_BLOCK_SIZE
instead of "borrowing" the AES code which "coincidentally" works
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Added support for the hmac(sm3) ahash authentication algorithm
changes since v1:
- added Acked-by tag below, no changes to the source
changes since v2:
- nothing
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Added support for the SM3 ahash algorithm
changes since v1:
- moved definition of CONTEXT_CONTROL_CRYPTO_ALG_SM3 (0x7) up above 0xf
changes since v2:
- allow compilation if CONFIG_CRYPTO_SM3 is not set
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Due to the addition of Chacha20-Poly1305 support to the inside-secure
driver, it now depends on CRYPTO_CHACHA20POLY1305. Added reference.
changes since v1:
- added missing dependency to crypto/Kconfig
changes since v2:
- nothing
changes since v3:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the Chacha20-Poly1305 cipher suite.
It adds both the basic rfc7539(chacha20,poly1305) as well as the
rfc7539esp(chacha20,poly1305) variant for IPsec ESP acceleration.
changes since v1:
- rebased on top of DES library changes done on cryptodev/master
- fixed crypto/Kconfig so that generic fallback is compiled as well
changes since v2:
- nothing
changes since v3:
- Fixed a problem where the tcrypt performance test would run fully on the
fallback cipher instead of the HW due to using an AAD length of 8 for
rfc7539esp. While this is not actually legal ESP (which includes SPI and
sequence number in the AAD as well), it is both inconvenient and not
necessary to run these vectors on the fallback cipher.
- Due to above, also realised that for plain (non-ESP) rfc7539, you
probably want to be able to run vectors with less than 8 bytes of AAD
on the HW, and this is actually possible as long as cryptlen is large
enough, so made that possible as well.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Added support for the CHACHA20 skcipher algorithm.
Tested on an eip197c-iesb configuration in the Xilinx VCU118 devboard,
passes all testmgr vectors plus the extra fuzzing tests.
changes since v1:
- rebased on top of DES library changes done on cryptodev/master
- fixed crypto/Kconfig so that generic fallback is compiled as well
changes since v2:
- made switch entry SAFEXCEL_AES explit and added empty default, as
requested by Antoine Tenart. Also needed to make SM4 patches apply.
changes since v3:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When VMAP_STACK is selected, stack cannot be DMA-mapped.
Therefore, the hash result has to be DMA-mapped in the request
context and copied into areq->result at completion.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the AES-CMAC authentication algorithm.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the AES XCBC authentication algorithm
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the AES-CBCMAC authentication algorithm.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the CRC32 "hash" algorithm
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Merge updates from Andrew Morton:
- a few hot fixes
- ocfs2 updates
- almost all of -mm (slab-generic, slab, slub, kmemleak, kasan,
cleanups, debug, pagecache, memcg, gup, pagemap, memory-hotplug,
sparsemem, vmalloc, initialization, z3fold, compaction, mempolicy,
oom-kill, hugetlb, migration, thp, mmap, madvise, shmem, zswap,
zsmalloc)
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (132 commits)
mm/zsmalloc.c: fix a -Wunused-function warning
zswap: do not map same object twice
zswap: use movable memory if zpool support allocate movable memory
zpool: add malloc_support_movable to zpool_driver
shmem: fix obsolete comment in shmem_getpage_gfp()
mm/madvise: reduce code duplication in error handling paths
mm: mmap: increase sockets maximum memory size pgoff for 32bits
mm/mmap.c: refine find_vma_prev() with rb_last()
riscv: make mmap allocation top-down by default
mips: use generic mmap top-down layout and brk randomization
mips: replace arch specific way to determine 32bit task with generic version
mips: adjust brk randomization offset to fit generic version
mips: use STACK_TOP when computing mmap base address
mips: properly account for stack randomization and stack guard gap
arm: use generic mmap top-down layout and brk randomization
arm: use STACK_TOP when computing mmap base address
arm: properly account for stack randomization and stack guard gap
arm64, mm: make randomization selected by generic topdown mmap layout
arm64, mm: move generic mmap layout functions to mm
arm64: consider stack randomization for mmap base only when necessary
...
Patch series "Make working with compound pages easier", v2.
These three patches add three helpers and convert the appropriate
places to use them.
This patch (of 3):
It's unnecessarily hard to find out the size of a potentially huge page.
Replace 'PAGE_SIZE << compound_order(page)' with page_size(page).
Link: http://lkml.kernel.org/r/20190721104612.19120-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull crypto fixes froim Herbert Xu:
"This fixes the following issues:
- potential boot hang in hwrng
- missing switch/break in talitos
- bugs and warnings in hisilicon
- build warning in inside-secure"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: hisilicon - avoid unused function warning
hwrng: core - don't wait on add_early_randomness()
crypto: hisilicon - Fix return value check in hisi_zip_acompress()
crypto: hisilicon - Matching the dma address for dma_pool_free()
crypto: hisilicon - Fix double free in sec_free_hw_sgl()
crypto: inside-secure - Fix unused variable warning when CONFIG_PCI=n
crypto: talitos - fix missing break in switch statement
The only caller of hisi_zip_vf_q_assign() is hidden in an #ifdef,
so the function causes a warning when CONFIG_PCI_IOV is disabled:
drivers/crypto/hisilicon/zip/zip_main.c:740:12: error: unused function 'hisi_zip_vf_q_assign' [-Werror,-Wunused-function]
Replace the #ifdef with an IS_ENABLED() check that leads to the
function being dropped based on the configuration.
Fixes: 79e09f30ee ("crypto: hisilicon - add SRIOV support for ZIP")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The return valude of add_comp_head() is int, but @head_size is size_t,
which is a unsigned type.
size_t head_size;
...
if (head_size < 0) // it will never work
return -ENOMEM
Modify the type of @head_size to int, then change the type to size_t
when invoke hisi_zip_create_req() as a parameter.
Fixes: 62c455ca85 ("crypto: hisilicon - add HiSilicon ZIP accelerator support")
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Acked-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When dma_pool_zalloc() fail in sec_alloc_and_fill_hw_sgl(),
dma_pool_free() is invoked, but the parameters that sgl_current and
sgl_current->next_sgl is not match.
Using sec_free_hw_sgl() instead of the original free routine.
Fixes: 915e4e8413 ("crypto: hisilicon - SEC security accelerator driver")
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are two problems in sec_free_hw_sgl():
First, when sgl_current->next is valid, @hw_sgl will be freed in the
first loop, but it free again after the loop.
Second, sgl_current and sgl_current->next_sgl is not match when
dma_pool_free() is invoked, the third parameter should be the dma
address of sgl_current, but sgl_current->next_sgl is the dma address
of next chain, so use sgl_current->next_sgl is wrong.
Fix this by deleting the last dma_pool_free() in sec_free_hw_sgl(),
modifying the condition for while loop, and matching the address for
dma_pool_free().
Fixes: 915e4e8413 ("crypto: hisilicon - SEC security accelerator driver")
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes an unused variable warning from the compiler when the
driver is being compiled without PCI support in the kernel.
Fixes: 625f269a5a ("crypto: inside-secure - add support for...")
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add missing break statement in order to prevent the code from falling
through to case CRYPTO_ALG_TYPE_AHASH.
Fixes: aeb4c132f3 ("crypto: talitos - Convert to new AEAD interface")
Cc: stable@vger.kernel.org
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull networking updates from David Miller:
1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski.
2) Use bio_vec in the networking instead of custom skb_frag_t, from
Matthew Wilcox.
3) Make use of xmit_more in r8169 driver, from Heiner Kallweit.
4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen.
5) Support all variants of 5750X bnxt_en chips, from Michael Chan.
6) More RTNL avoidance work in the core and mlx5 driver, from Vlad
Buslov.
7) Add TCP syn cookies bpf helper, from Petar Penkov.
8) Add 'nettest' to selftests and use it, from David Ahern.
9) Add extack support to drop_monitor, add packet alert mode and
support for HW drops, from Ido Schimmel.
10) Add VLAN offload to stmmac, from Jose Abreu.
11) Lots of devm_platform_ioremap_resource() conversions, from
YueHaibing.
12) Add IONIC driver, from Shannon Nelson.
13) Several kTLS cleanups, from Jakub Kicinski.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits)
mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer
mlxsw: spectrum: Register CPU port with devlink
mlxsw: spectrum_buffers: Prevent changing CPU port's configuration
net: ena: fix incorrect update of intr_delay_resolution
net: ena: fix retrieval of nonadaptive interrupt moderation intervals
net: ena: fix update of interrupt moderation register
net: ena: remove all old adaptive rx interrupt moderation code from ena_com
net: ena: remove ena_restore_ethtool_params() and relevant fields
net: ena: remove old adaptive interrupt moderation code from ena_netdev
net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*()
net: ena: enable the interrupt_moderation in driver_supported_features
net: ena: reimplement set/get_coalesce()
net: ena: switch to dim algorithm for rx adaptive interrupt moderation
net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it
net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable
ethtool: implement Energy Detect Powerdown support via phy-tunable
xen-netfront: do not assume sk_buff_head list is empty in error handling
s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb”
net: ena: don't wake up tx queue when down
drop_monitor: Better sanitize notified packets
...
Pull crypto updates from Herbert Xu:
"API:
- Add the ability to abort a skcipher walk.
Algorithms:
- Fix XTS to actually do the stealing.
- Add library helpers for AES and DES for single-block users.
- Add library helpers for SHA256.
- Add new DES key verification helper.
- Add surrounding bits for ESSIV generator.
- Add accelerations for aegis128.
- Add test vectors for lzo-rle.
Drivers:
- Add i.MX8MQ support to caam.
- Add gcm/ccm/cfb/ofb aes support in inside-secure.
- Add ofb/cfb aes support in media-tek.
- Add HiSilicon ZIP accelerator support.
Others:
- Fix potential race condition in padata.
- Use unbound workqueues in padata"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (311 commits)
crypto: caam - Cast to long first before pointer conversion
crypto: ccree - enable CTS support in AES-XTS
crypto: inside-secure - Probe transform record cache RAM sizes
crypto: inside-secure - Base RD fetchcount on actual RD FIFO size
crypto: inside-secure - Base CD fetchcount on actual CD FIFO size
crypto: inside-secure - Enable extended algorithms on newer HW
crypto: inside-secure: Corrected configuration of EIP96_TOKEN_CTRL
crypto: inside-secure - Add EIP97/EIP197 and endianness detection
padata: remove cpu_index from the parallel_queue
padata: unbind parallel jobs from specific CPUs
padata: use separate workqueues for parallel and serial work
padata, pcrypt: take CPU hotplug lock internally in padata_alloc_possible
crypto: pcrypt - remove padata cpumask notifier
padata: make padata_do_parallel find alternate callback CPU
workqueue: require CPU hotplug read exclusion for apply_workqueue_attrs
workqueue: unconfine alloc/apply/free_workqueue_attrs()
padata: allocate workqueue internally
arm64: dts: imx8mq: Add CAAM node
random: Use wait_event_freezable() in add_hwgenerator_randomness()
crypto: ux500 - Fix COMPILE_TEST warnings
...
- Add support for IBM z15 machines.
- Add SHA3 and CCA AES cipher key support in zcrypt and pkey refactoring.
- Move to arch_stack_walk infrastructure for the stack unwinder.
- Various kasan fixes and improvements.
- Various command line parsing fixes.
- Improve decompressor phase debuggability.
- Lift no bss usage restriction for the early code.
- Use refcount_t for reference counters for couple of places in
mm code.
- Logging improvements and return code fix in vfio-ccw code.
- Couple of zpci fixes and minor refactoring.
- Remove some outdated documentation.
- Fix secure boot detection.
- Other various minor code clean ups.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl1/pRoACgkQjYWKoQLX
FBjxLQf/Y1nlmoc8URLqaqfNTczIvUzdfXuahI7L75RoIIiqHtcHBrVwauSr7Lma
XVRzK/+6q0UPISrOIZEEtQKsMMM7rGuUv/+XTyrOB/Tsc31kN2EIRXltfXI/lkb8
BZdgch4Xs2rOD7y6TvqpYJsXYXsnLMWwCk8V+48V/pok4sEgMDgh0bTQRHPHYmZ6
1cv8ZQ0AeuVxC6ChM30LhajGRPkYd8RQ82K7fU7jxT0Tjzu66SyrW3pTwA5empBD
RI2yBZJ8EXwJyTCpvN8NKiBgihDs9oUZl61Dyq3j64Mb1OuNUhxXA/8jmtnGn0ok
O9vtImCWzExhjSMkvotuhHEC05nEEQ==
=LCgE
-----END PGP SIGNATURE-----
Merge tag 's390-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add support for IBM z15 machines.
- Add SHA3 and CCA AES cipher key support in zcrypt and pkey
refactoring.
- Move to arch_stack_walk infrastructure for the stack unwinder.
- Various kasan fixes and improvements.
- Various command line parsing fixes.
- Improve decompressor phase debuggability.
- Lift no bss usage restriction for the early code.
- Use refcount_t for reference counters for couple of places in mm
code.
- Logging improvements and return code fix in vfio-ccw code.
- Couple of zpci fixes and minor refactoring.
- Remove some outdated documentation.
- Fix secure boot detection.
- Other various minor code clean ups.
* tag 's390-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
s390: remove pointless drivers-y in drivers/s390/Makefile
s390/cpum_sf: Fix line length and format string
s390/pci: fix MSI message data
s390: add support for IBM z15 machines
s390/crypto: Support for SHA3 via CPACF (MSA6)
s390/startup: add pgm check info printing
s390/crypto: xts-aes-s390 fix extra run-time crypto self tests finding
vfio-ccw: fix error return code in vfio_ccw_sch_init()
s390: vfio-ap: fix warning reset not completed
s390/base: remove unused s390_base_mcck_handler
s390/sclp: Fix bit checked for has_sipl
s390/zcrypt: fix wrong handling of cca cipher keygenflags
s390/kasan: add kdump support
s390/setup: avoid using strncmp with hardcoded length
s390/sclp: avoid using strncmp with hardcoded length
s390/module: avoid using strncmp with hardcoded length
s390/pci: avoid using strncmp with hardcoded length
s390/kaslr: reserve memory for kasan usage
s390/mem_detect: provide single get_mem_detect_end
s390/cmma: reuse kstrtobool for option value parsing
...
While storing an int in a pointer is safe the compiler is not
happy about it. So we need some extra casting in order to make
this warning free.
Fixes: 1d3f75bce123 ("crypto: caam - dispose of IRQ mapping only...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In XTS encryption/decryption the plaintext byte size
can be >= AES_BLOCK_SIZE. This patch enable the AES-XTS ciphertext
stealing implementation in ccree driver.
Signed-off-by: Uri Shir <uri.shir@arm.com>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch actually probes the transform record cache data and
administration RAM sizes, instead of making assumptions, and then
configures the TRC based on the actually probed values.
This allows the driver to work with EIP197 HW that has TRC RAM
sizes different from those of the Marvell EIP197B/D variants.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch derives the result descriptor fetch count from the actual
FIFO size advertised by the hardware. Fetching result descriptors
one at a time is a performance bottleneck for small blocks, especially
on hardware with multiple pipes. Even moreso if the HW has few rings.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch derives the command descriptor fetch count from the actual
FIFO size advertised by the hardware. Fetching command descriptors
one at a time is a performance bottleneck for small blocks, especially
on hardware with multiple pipes. Even moreso if the HW has few rings.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch enables algorithms that did not fit the original 32 bit
FUNCTION_EN register anymore via the FUNCTION2_EN extension reg.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch corrects the configuration of the EIP197_PE_EIP96_TOKEN_CTRL
register. Previous value was wrong and potentially dangerous.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds automatic EIP97/EIP197 detection, so it does not need to
rely on any static value from the device table anymore. In particular,
the static value from the table won't work for PCI devboards that cannot
be further identified save from this direct hardware probing.
The patch also adds automatic host xs endianness detection & correction.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch introduces sha3 support for s390.
- Rework the s390-specific SHA1 and SHA2 related code to
provide the basis for SHA3.
- Provide two new kernel modules sha3_256_s390 and
sha3_512_s390 together with new kernel options.
Signed-off-by: Joerg Schmidbauer <jschmidb@de.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
This patch fixes a number of warnings encountered when this driver
is built on a 64-bit platform with COMPILE_TEST.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When using single_open() for opening, single_release() should be
used instead of seq_release(), otherwise there is a memory leak.
Fixes: 09ae5d37e0 ("crypto: zip - Add Compression/Decompression statistics")
Cc: <stable@vger.kernel.org>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With IRQ requesting being managed by devres we need to make sure that
we dispose of IRQ mapping after and not before it is free'd (otherwise
we'll end up with a warning from the kernel). To achieve that simply
convert IRQ mapping to rely on devres as well.
Fixes: f314f12db65c ("crypto: caam - convert caam_jr_init() to use devres")
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Iuliana Prodan <iuliana.prodan@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Irq_of_parse_and_map will return zero in case of error, so add a error
check for that.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Iuliana Prodan <iuliana.prodan@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use devres to unmap memory and drop explicit de-initialization
code.
NOTE: There's no corresponding unmapping code in caam_jr_remove which
seems like a resource leak.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Iuliana Prodan <iuliana.prodan@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to access IP block's registers we need to enable appropriate
clocks first, otherwise we are risking hanging the CPU.
The problem becomes very apparent when trying to use CAAM driver built
as a kernel module. In that case caam_probe() gets called after
clk_disable_unused() which means all of the necessary clocks are
guaranteed to be disabled.
Coincidentally, this change also fixes iomap leak introduced by early
return (instead of "goto iounmap_ctrl") in commit
41fc54afae70 ("crypto: caam - simplfy clock initialization")
Tested on ZII i.MX6Q+ RDU2
Fixes: 176435ad2a ("crypto: caam - defer probing until QMan is available")
Fixes: 41fc54afae70 ("crypto: caam - simplfy clock initialization")
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Iuliana Prodan <iuliana.prodan@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since we already have the pointer to the full original sk_proto
stored use that instead of storing all individual callback
pointers as well.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename the sha*_init arrays to n2_sha*_init so that they do not conflict
with the functions declared in crypto/sha256.h.
Also rename md5_init to n2_md5_init for consistency.
This is a preparation patch for folding crypto/sha256.h into crypto/sha.h.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rename the sha*_init arrays to chcr_sha*_init so that they do not conflict
with the functions declared in crypto/sha256.h.
This is a preparation patch for folding crypto/sha256.h into crypto/sha.h.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rename the algo_init arrays to cc_algo_init so that they do not conflict
with the functions declared in crypto/sha256.h.
This is a preparation patch for folding crypto/sha256.h into crypto/sha.h.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the basic AES-CCM AEAD cipher suite.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for AES in output feedback mode (AES-OFB).
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for AES in 128 bit cipher feedback mode (AES-CFB).
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the basic AES-GCM AEAD cipher suite.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some minor cleanup changing e.g. "if (!x) A else B" to "if (x) B else A",
merging some back-to-back if's with the same condition, collapsing some
back-to-back assignments to the same variable and replacing some weird
assignments with proper symbolics.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Moved counter mode handling code in front as it doesn't depend on the
rest of the code to be executed, it can just do its thing and exit.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of having a fixed value (of 300) all over the place, the value for
for .cra_priority is now made into a define (SAFEXCEL_CRA_PRIORITY).
This makes it easier to play with, e.g. during development.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch probes the supported algorithms from the hardware and only
registers the ones that the hardware actually supports. This is necessary
because this is a generic driver supposed to run on a wide variety of
engines, which may or may not implement certain algorithms.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the AES-XTS skcipher algorithm.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ctx->alg and ctx->mode were set from safexcel_send_req through the
various safexcel_encrypt and _decrypt routines, but this makes little
sense as these are static per ciphersuite. So moved to _init instead,
in preparation of adding more ciphersuites.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Record crypto key to context during setkey and set the key to
transform state buffer in encrypt/decrypt process.
Signed-off-by: Vic Wu <vic.wu@mediatek.com>
Tested-by: John Crispin <john@phrozen.og>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support to OFB/CFB mode.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Vic Wu <vic.wu@mediatek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The driver was treating -EBUSY as indication of queueing to backlog
without checking that backlog is enabled for the request.
Fix it by checking request flags.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Vic Wu <vic.wu@mediatek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a pre-computed text length to avoid uninitialized value in the check.
Fixes: e47270665b ("crypto: mediatek - Add empty messages check in GCM mode")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Vic Wu <vic.wu@mediatek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move mtk_aes_find_dev() to right functions as nobody uses the
'cryp' under current flows.
We can also avoid duplicate checks here and there in this way.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Vic Wu <vic.wu@mediatek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto fix from Herbert Xu:
"Fix a potential crash in the ccp driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ccp - Ignore unconfigured CCP device on suspend/resume
When CRYPTO_DEV_HISI_SEC=y, below compilation error is found after
'commit 894b68d8be ("crypto: hisilicon/des - switch to new verification routines")':
drivers/crypto/hisilicon/sec/sec_algs.o: In function `sec_alg_skcipher_setkey_des_cbc':
sec_algs.c:(.text+0x11f0): undefined reference to `des_expand_key'
drivers/crypto/hisilicon/sec/sec_algs.o: In function `sec_alg_skcipher_setkey_des_ecb':
sec_algs.c:(.text+0x1390): undefined reference to `des_expand_key'
make: *** [vmlinux] Error 1
This because DES library has been moved to lib/crypto in this commit
'04007b0e6cbb ("crypto: des - split off DES library from generic DES cipher driver")'.
Fix this by selecting CRYPTO_LIB_DES in CRYPTO_DEV_HISI_SEC.
Fixes: 04007b0e6c ("crypto: des - split off DES library from generic DES cipher driver")
Fixes: 894b68d8be ("crypto: hisilicon/des - switch to new verification routines")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For correctness and compliance with the XTS-AES specification, we are
adding support for ciphertext stealing to XTS implementations, even
though no use cases are known that will be enabled by this.
Since the ccp driver already has a fallback skcipher standby for
dealing with input sizes other than [16, 512, 1024, 2048, 4096],
just drop the check against the block size.
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gary Hook <gary.hook@amd.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
drivers/crypto/nx/nx.h:12:19: warning:
nx_driver_string defined but not used [-Wunused-const-variable=]
drivers/crypto/nx/nx.h:13:19: warning:
nx_driver_version defined but not used [-Wunused-const-variable=]
They are never used, so just remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
drivers/crypto/atmel-i2c.h:68:3: warning:
error_list defined but not used [-Wunused-const-variable=]
error_list is only used in atmel-i2c.c,
so just move the definition over there.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Per feedback from NXP tech support the way to use register based
service interface on i.MX8MQ is to follow the same set of steps
outlined for the case when virtualization is enabled, regardless if it
is. Current version of SRM for i.MX8MQ speaks of DECO DID_MS and DECO
DID_LS registers, but apparently those are not implemented, so the
case when SCFGR[VIRT_EN]=0 should be handled the same as the case when
SCFGR[VIRT_EN]=1
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
i.MX8 mScale SoC still use 32-bit addresses in its CAAM implmentation,
so we can't rely on sizeof(dma_addr_t) to detemine CAAM pointer
size. Convert the code to query CTPR and MCFGR for that during driver
probing.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Using dma_addr_t for elements of JobR input ring is not appropriate on
all 64-bit SoCs, some of which, like i.MX8MQ, use only 32-bit wide
pointers there. Convert all of the code to use explicit helper
function that can be later extended to support i.MX8MQ. No functional
change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Using struct jr_outentry to specify the layout of JobR output ring is
not appropriate for all 64-bit SoC, since some of them, like i.MX8MQ,
use 32-bit pointers there which doesn't match 64-bit
dma_addr_t. Convert existing code to use explicit helper functions to
access any of the JobR output ring elements, so that the support for
i.MX8MQ can be added later. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of selecting the implementation of
cpu_to_caam_dma()/caam_dma_to_cpu() at build time using the
preprocessor, convert the code to do that at run-time using IS_ENABLED
macro. This is needed to add support for i.MX8MQ. No functional change
intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to be able to configure CAAM pointer size at run-time, which
needed to support i.MX8MQ, which is 64-bit SoC with 32-bit pointer
size, convert CAAM_PTR_SZ to refer to a global variable of the same
name ("caam_ptr_sz") and adjust the rest of the code accordingly. No
functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Both qi.h and cammalg_qi2.h seem to define identical versions of
MAX_SDLEN. Move it to desc_constr.h to avoid duplication.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since 32-bit of both wr_reg64 and rd_reg64 now use 64-bit IO helpers,
these functions should no longer be necessary. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
