When running test_kmod.sh the following shows up
# sysctl cannot stat /proc/sys/net/core/bpf_jit_enable No such file or directory
cannot: stat_/proc/sys/net/core/bpf_jit_enable #
# sysctl cannot stat /proc/sys/net/core/bpf_jit_harden No such file or directory
cannot: stat_/proc/sys/net/core/bpf_jit_harden #
Rework to enable CONFIG_BPF_JIT to solve "No such file or directory"
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
test_btf_dump fails when run with O=, because it needs to access source
files and assumes they live in ./progs/, which is not the case in this
scenario.
Fix by instructing kselftest to copy btf_dump_test_case_*.c files to the
test directory. Since kselftest does not preserve directory structure,
adjust the test to look in ./progs/ and then in ./.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
test_cgroup_storage fails on s390 with an assertion failure: packets are
dropped when they shouldn't. The problem is that BPF_DW packet count is
accessed as BPF_W with an offset of 0, which is not correct on
big-endian machines.
Since the point of this test is not to verify narrow loads/stores,
simply use BPF_DW when working with packet counts.
Fixes: 68cfa3ac6b ("selftests/bpf: add a cgroup storage test")
Fixes: 919646d2a3 ("selftests/bpf: extend the storage test to test per-cpu cgroup storage")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When showing metadata about a single program by invoking
"bpftool prog show PROG", the file descriptor referring to the program
is not closed before returning from the function. Let's close it.
Fixes: 71bb428fe2 ("tools: bpf: add bpftool")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
"bind4 allow specific IP & port" and "bind6 deny specific IP & port"
fail on s390 because of endianness issue: the 4 IP address bytes are
loaded as a word and compared with a constant, but the value of this
constant should be different on big- and little- endian machines, which
is not the case right now.
Use __bpf_constant_ntohl to generate proper value based on machine
endianness.
Fixes: 1d436885b2 ("selftests/bpf: Selftest for sys_bind post-hooks.")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Daniel Borkmann says:
====================
pull-request: bpf 2019-08-11
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) x64 JIT code generation fix for backward-jumps to 1st insn, from Alexei.
2) Fix buggy multi-closing of BTF file descriptor in libbpf, from Andrii.
3) Fix libbpf_num_possible_cpus() to make it thread safe, from Takshak.
4) Fix bpftool to dump an error if pinning fails, from Jakub.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull in updates in BPF helper function description.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
No error message is currently printed if the pin syscall
itself fails. It got lost in the loadall refactoring.
Fixes: 77380998d9 ("bpftool: add loadall command")
Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Change an error message to work for any object being
pinned not just programs.
Fixes: 71bb428fe2 ("tools: bpf: add bpftool")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Update TDC tests with cases varifying ability of TC to install or delete
batches of skbedit actions.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
"Yeah I should have sent a pull request last week, so there is a lot
more here than usual:
1) Fix memory leak in ebtables compat code, from Wenwen Wang.
2) Several kTLS bug fixes from Jakub Kicinski (circular close on
disconnect etc.)
3) Force slave speed check on link state recovery in bonding 802.3ad
mode, from Thomas Falcon.
4) Clear RX descriptor bits before assigning buffers to them in
stmmac, from Jose Abreu.
5) Several missing of_node_put() calls, mostly wrt. for_each_*() OF
loops, from Nishka Dasgupta.
6) Double kfree_skb() in peak_usb can driver, from Stephane Grosjean.
7) Need to hold sock across skb->destructor invocation, from Cong
Wang.
8) IP header length needs to be validated in ipip tunnel xmit, from
Haishuang Yan.
9) Use after free in ip6 tunnel driver, also from Haishuang Yan.
10) Do not use MSI interrupts on r8169 chips before RTL8168d, from
Heiner Kallweit.
11) Upon bridge device init failure, we need to delete the local fdb.
From Nikolay Aleksandrov.
12) Handle erros from of_get_mac_address() properly in stmmac, from
Martin Blumenstingl.
13) Handle concurrent rename vs. dump in netfilter ipset, from Jozsef
Kadlecsik.
14) Setting NETIF_F_LLTX on mac80211 causes complete breakage with
some devices, so revert. From Johannes Berg.
15) Fix deadlock in rxrpc, from David Howells.
16) Fix Kconfig deps of enetc driver, we must have PHYLIB. From Yue
Haibing.
17) Fix mvpp2 crash on module removal, from Matteo Croce.
18) Fix race in genphy_update_link, from Heiner Kallweit.
19) bpf_xdp_adjust_head() stopped working with generic XDP when we
fixes generic XDP to support stacked devices properly, fix from
Jesper Dangaard Brouer.
20) Unbalanced RCU locking in rt6_update_exception_stamp_rt(), from
David Ahern.
21) Several memory leaks in new sja1105 driver, from Vladimir Oltean"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (214 commits)
net: dsa: sja1105: Fix memory leak on meta state machine error path
net: dsa: sja1105: Fix memory leak on meta state machine normal path
net: dsa: sja1105: Really fix panic on unregistering PTP clock
net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well
net: dsa: sja1105: Fix broken learning with vlan_filtering disabled
net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus()
net: sched: sample: allow accessing psample_group with rtnl
net: sched: police: allow accessing police->params with rtnl
net: hisilicon: Fix dma_map_single failed on arm64
net: hisilicon: fix hip04-xmit never return TX_BUSY
net: hisilicon: make hip04_tx_reclaim non-reentrant
tc-testing: updated vlan action tests with batch create/delete
net sched: update vlan action for batched events operations
net: stmmac: tc: Do not return a fragment entry
net: stmmac: Fix issues when number of Queues >= 4
net: stmmac: xgmac: Fix XGMAC selftests
be2net: disable bh with spin_lock in be_process_mcc
net: cxgb3_main: Fix a resource leak in a error path in 'init_one()'
net: ethernet: sun4i-emac: Support phy-handle property for finding PHYs
net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER
...
Update TDC tests with cases varifying ability of TC to install or delete
batches of vlan actions.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure that shutdown never works, and at the same time document how
I tested to came to the conclusion that currently reuse is not possible.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This Kselftest update for Linux 5.3-rc4 consists of fix to Kselftest
framework to save and restore errno and a fix to livepatch to push
and pop dynamic debug config.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAl1ITQcACgkQCwJExA0N
QxyEuBAA6Q5zELUixsj+RE2q5sIk0O3ft6gy1Da5olKUlk91P5Y+uhUj2yvVRRxy
+u3YvfuItSOX8fCVMo2EzD4LRiOK1AsFyI/IvAekZs0RPNDxgqFITjTe5EAMombY
V4o6tuBL3P/mC4mS/GLW3SCmmfDT6d+Xod4JmYOTiY1phQZcISXUjhT7CxrLT70G
lvblnnt9Rl/xfBbYswqIZMMHTdNRrnmplYkCXg/wRHAJzMiIuMNf7EU0IulCmWZq
VVE4HZsu1+3ElhxfewLHPb9yJ/0gJyUDJp/ZiNi2OLY1rj302zKJvecCNzzLaEWG
3B5JkHYKB+eM0Hd9/5w89DWJHLsmYPK34Z2bwrO7s0dIlZIPbVMy3Zwn3LJ2FSlK
imX24MorT16dVpHwUSq3sgzYykVqJk9v1ddRLOQt/WW8JFQVMqibJrHTLkN/9FC2
FY/GoR9/baICgUqnL8LwRJBaB0E/St9siZPB/W8d/2J8rOSBy70bYcvVBqRA8fS9
Bi1PAlhYvWPTQb6FYG7OnNaEF32iO0Y5ojRSXh1DqsHwn+0z+CPrna2zxCs5dxw+
/5t2ooYY/0lDQ4mWyNbrwu4h4oEkk4aWj6P3LKBfU9hOm7djMITuEcoyfICnkaQc
CbNOIjXbGAPHaQMXEUetimH4od/AQ/RkUby/9XdIXUWW7E79EnY=
=gkVg
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"A fix to the Kselftest framework to save and restore errno and a fix
to livepatch to push and pop dynamic debug config"
* tag 'linux-kselftest-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/livepatch: push and pop dynamic debug config
kselftest: save-and-restore errno to allow for %m formatting
Given the increasing number of BPF selftests, it makes sense to
reduce the time to execute these tests. The ping parameters are
adjusted to reduce the time from measures 9 sec to approx 2.8 sec.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In-order to test both native-XDP (xdpdrv) and generic-XDP (xdpgeneric)
create two wrapper test scripts, that start the test_xdp_vlan.sh script
with these modes.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change BPF selftest test_xdp_vlan.sh to (default) use generic XDP.
This selftest was created together with a fix for generic XDP, in commit
2972495699 ("net: fix generic XDP to handle if eth header was
mangled"). And was suppose to catch if generic XDP was broken again.
The tests are using veth and assumed that veth driver didn't support
native driver XDP, thus it used the (ip link set) 'xdp' attach that fell
back to generic-XDP. But veth gained native-XDP support in 948d4f214f
("veth: Add driver XDP"), which caused this test script to use
native-XDP.
Fixes: 948d4f214f ("veth: Add driver XDP")
Fixes: 97396ff0bc ("selftests/bpf: add XDP selftests for modifying and popping VLAN headers")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull perf tooling fixes from Thomas Gleixner:
"A set of updates for perf tools and documentation:
perf header:
- Prevent a division by zero
- Deal with an uninitialized warning proper
libbpf:
- Fix the missiong __WORDSIZE definition for musl & al
UAPI headers:
- Synchronize kernel headers
Documentation:
- Fix the memory units for perf.data size"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
libbpf: fix missing __WORDSIZE definition
perf tools: Fix perf.data documentation units for memory size
perf header: Fix use of unitialized value warning
perf header: Fix divide by zero error if f_header.attr_size==0
tools headers UAPI: Sync if_link.h with the kernel
tools headers UAPI: Sync sched.h with the kernel
tools headers UAPI: Sync usbdevice_fs.h with the kernels to get new ioctl
tools perf beauty: Fix usbdevfs_ioctl table generator to handle _IOC()
tools headers UAPI: Update tools's copy of drm.h headers
tools headers UAPI: Update tools's copy of mman.h headers
tools headers UAPI: Update tools's copy of kvm.h headers
tools include UAPI: Sync x86's syscalls_64.tbl and generic unistd.h to pick up clone3 and pidfd_open
On my laptop most memcg kselftests were being skipped because it claimed
cgroup v2 hierarchy wasn't mounted, but this isn't correct. Instead, it
seems current systemd HEAD mounts it with the name "cgroup2" instead of
"cgroup":
% grep cgroup /proc/mounts
cgroup2 /sys/fs/cgroup cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate 0 0
I can't think of a reason to need to check fs_spec explicitly
since it's arbitrary, so we can just rely on fs_vfstype.
After these changes, `make TARGETS=cgroup kselftest` actually runs the
cgroup v2 tests in more cases.
Link: http://lkml.kernel.org/r/20190723210737.GA487@chrisdown.name
Signed-off-by: Chris Down <chris@chrisdown.name>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add 2 tests that check JIT code generation to jumps to 1st insn.
1st test is similar to syzbot reproducer.
The backwards branch is never taken at runtime.
2nd test has branch to 1st insn that executes.
The test is written as two bpf functions, since it's not possible
to construct valid single bpf program that jumps to 1st insn.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
5d01ab7bac ("libbpf: fix erroneous multi-closing of BTF FD")
introduced backwards-compatibility issue, manifesting itself as -E2BIG
error returned on program load due to unknown non-zero btf_fd attribute
value for BPF_PROG_LOAD sys_bpf() sub-command.
This patch fixes bug by ensuring that we only ever associate BTF FD with
program if there is a BTF.ext data that was successfully loaded into
kernel, which automatically means kernel supports func_info/line_info
and associated BTF FD for progs (checked and ensured also by BTF
sanitization code).
Fixes: 5d01ab7bac ("libbpf: fix erroneous multi-closing of BTF FD")
Reported-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Having static variable `cpus` in libbpf_num_possible_cpus function
without guarding it with mutex makes this function thread-unsafe.
If multiple threads accessing this function, in the current form; it
leads to incrementing the static variable value `cpus` in the multiple
of total available CPUs.
Used local stack variable to calculate the number of possible CPUs and
then updated the static variable using WRITE_ONCE().
Changes since v1:
* added stack variable to calculate cpus
* serialized static variable update using WRITE_ONCE()
* fixed Fixes tag
Fixes: 6446b31555 ("bpf: add a new API libbpf_num_possible_cpus()")
Signed-off-by: Takshak Chahande <ctakshak@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Build bot reports some recent TLS tests are failing
with CONFIG_TLS=n. Correct the expected return code
and skip TLS installation if not supported.
Tested with CONFIG_TLS=n and CONFIG_TLS=m.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Fixes: cf32526c88 ("selftests/tls: add a test for ULP but no keys")
Fixes: 65d41fb317 ("selftests/tls: add a bidirectional test")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The livepatching self-tests tweak the dynamic debug config to verify
the kernel log during the tests. Enhance set_dynamic_debug() so that
the config changes are restored when the script exits.
Note this functionality needs to keep in sync with:
- dynamic_debug input/output formatting
- functions affected by set_dynamic_debug()
For example, push_dynamic_debug() transforms:
kernel/livepatch/transition.c:530 [livepatch]klp_init_transition =_ "'%s': initializing %s transition\012"
to the following:
file kernel/livepatch/transition.c line 530 =_
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Previously, using "%m" in a ksft_* format string can result in strange
output because the errno value wasn't saved before calling other libc
functions. The solution is to simply save and restore the errno before
we format the user-supplied format string.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXUCO6AAKCRCRxhvAZXjc
ojpPAP9w0DAQbItLqcgdsad3fbHibUs5Ix7TUy0qIRgan2QF2AEAzWmo2DVGvRk3
yI+NnzVXX63iUqv5hBtCNy68TUWyXgc=
=WSnj
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20190730' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd fixes from Christian Brauner:
"This makes setting the exit_state in exit_notify() consistent after
fixing the pidfd polling race pre-rc1. Related to the race fix, this
adds a WARN_ON() to do_notify_pidfd() to catch any future exit_state
races.
Last, this removes an obsolete comment from the pidfd tests"
* tag 'for-linus-20190730' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
exit: make setting exit_state consistent
pidfd: Add warning if exit_state is 0 during notification
pidfd: remove obsolete comments from test
This Kselftest update for Linux 5.3-rc3 consists of minor fixes to
tests and one major fix to livepatch test to add skip handling to
avoid false fail reports when livepatch is disabled.
-----BEGIN PGP SIGNATURE-----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=qYbT
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Minor fixes to tests and one major fix to livepatch test to add skip
handling to avoid false fail reports when livepatch is disabled"
* tag 'linux-kselftest-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/livepatch: add test skip handling
selftests: mlxsw: Fix typo in qos_mc_aware.sh
selftests/x86: fix spelling mistake "FAILT" -> "FAIL"
selftests: kmod: Fix typo in kmod.sh
perf header:
Vince Weaver:
- Fix divide by zero error if f_header.attr_size==0, found using a perf tool fuzzer.
Numfor Mbiziwo-Tiapo:
- Silence use of uninitialized value warning pointed out by clang's MSAN tool.
libbpf:
Andrii Nakryiko:
- Fix missing __WORDSIZE definition in some systems, such as musl libc (Alpine Linux).
tools header UAPI:
Arnaldo Carvalho de Melo:
- Sync headers to address perf build warnings:
- syscalls_64.tbl and generic unistd.h to pick up clone3 and pidfd_open.
- With new ioctls: kvm.h, drm.h and usbdevice_fs.h.
- No tooling change: mman.h, sched.h and if_link.h.
Documentation:
Vince Weaver:
- Fix perf.data documentation units for memory size, its kB, not bytes.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXT9hNAAKCRCyPKLppCJ+
J6hMAPwIEjHmwu7rCCnaY5NyP7KvV+bzriK/ajxNVXF5dbha9QD/bs785KbBvDvO
1Iz0/JrTT2trXI9aUjD/mrFKMNkFZAU=
=GiQA
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-5.3-20190729' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
perf header:
Vince Weaver:
- Fix divide by zero error if f_header.attr_size==0, found using a perf tool fuzzer.
Numfor Mbiziwo-Tiapo:
- Silence use of uninitialized value warning pointed out by clang's MSAN tool.
libbpf:
Andrii Nakryiko:
- Fix missing __WORDSIZE definition in some systems, such as musl libc (Alpine Linux).
tools header UAPI:
Arnaldo Carvalho de Melo:
- Sync headers to address perf build warnings:
- syscalls_64.tbl and generic unistd.h to pick up clone3 and pidfd_open.
- With new ioctls: kvm.h, drm.h and usbdevice_fs.h.
- No tooling change: mman.h, sched.h and if_link.h.
Documentation:
Vince Weaver:
- Fix perf.data documentation units for memory size, its kB, not bytes.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
hashmap.h depends on __WORDSIZE being defined. It is defined by
glibc/musl in different headers. It's an explicit goal for musl to be
"non-detectable" at compilation time, so instead include glibc header if
glibc is explicitly detected and fall back to musl header otherwise.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Fixes: e3b9242240 ("libbpf: add resizable non-thread safe internal hashmap")
Link: https://lkml.kernel.org/r/20190718173021.2418606-1-andriin@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf.data-file-format documentation incorrectly says the
HEADER_TOTAL_MEM results are in bytes. The results are in kilobytes
(perf reads the value from /proc/meminfo)
Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1907251155500.22624@macbook-air
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building our local version of perf with MSAN (Memory Sanitizer) and
running the perf record command, MSAN throws a use of uninitialized
value warning in "tools/perf/util/util.c:333:6".
This warning stems from the "buf" variable being passed into "write".
It originated as the variable "ev" with the type union perf_event*
defined in the "perf_event__synthesize_attr" function in
"tools/perf/util/header.c".
In the "perf_event__synthesize_attr" function they allocate space with a malloc
call using ev, then go on to only assign some of the member variables before
passing "ev" on as a parameter to the "process" function therefore "ev"
contains uninitialized memory. Changing the malloc call to zalloc to initialize
all the members of "ev" which gets rid of the warning.
To reproduce this warning, build perf by running:
make -C tools/perf CLANG=1 CC=clang EXTRA_CFLAGS="-fsanitize=memory\
-fsanitize-memory-track-origins"
(Additionally, llvm might have to be installed and clang might have to
be specified as the compiler - export CC=/usr/bin/clang)
then running:
tools/perf/perf record -o - ls / | tools/perf/perf --no-pager annotate\
-i - --stdio
Please see the cover letter for why false positive warnings may be
generated.
Signed-off-by: Numfor Mbiziwo-Tiapo <nums@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Drayton <mbd@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190724234500.253358-2-nums@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So I have been having lots of trouble with hand-crafted perf.data files
causing segfaults and the like, so I have started fuzzing the perf tool.
First issue found:
If f_header.attr_size is 0 in the perf.data file, then perf will crash
with a divide-by-zero error.
Committer note:
Added a pr_err() to tell the user why the command failed.
Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1907231100440.14532@macbook-air
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
07a4ddec3c ("bonding: add an option to specify a delay between peer notifications")
And silence this build warning:
Kernel ABI header at 'tools/include/uapi/linux/if_link.h' differs from latest version at 'include/uapi/linux/if_link.h'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vincent Bernat <vincent@bernat.ch>
Link: https://lkml.kernel.org/n/tip-3liw4exxh8goc0rq9xryl2kv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
a509a7cd79 ("sched/uclamp: Extend sched_setattr() to support utilization clamping")
1d6362fa0c ("sched/core: Allow sched_setattr() to use the current policy")
7f192e3cd3 ("fork: add clone3")
And silence this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/sched.h' differs from latest version at 'include/uapi/linux/sched.h'
diff -u tools/include/uapi/linux/sched.h include/uapi/linux/sched.h
No changes in tools/ due to the above.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Patrick Bellasi <patrick.bellasi@arm.com>
Link: https://lkml.kernel.org/n/tip-mtrpsjrux5hgyr5uf8l1aa46@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
6d101f24f1 ("USB: add usbfs ioctl to retrieve the connection parameters")
And address this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/usbdevice_fs.h' differs from latest version at 'include/uapi/linux/usbdevice_fs.h'
diff -u tools/include/uapi/linux/usbdevice_fs.h include/uapi/linux/usbdevice_fs.h
Which ends up autogenerating a ioctl_cmd->string table used by 'perf
trace':
$ tools/perf/trace/beauty/usbdevfs_ioctl.sh > before
$ cp include/uapi/linux/usbdevice_fs.h tools/include/uapi/linux/usbdevice_fs.h
$ tools/perf/trace/beauty/usbdevfs_ioctl.sh > after
$ diff -u before after
--- before 2019-07-26 15:26:55.513636844 -0300
+++ after 2019-07-26 15:29:11.650518677 -0300
@@ -23,6 +23,7 @@
[2] = "BULK",
[30] = "DROP_PRIVILEGES",
[31] = "GET_SPEED",
+ [32] = "CONNINFO_EX",
[3] = "RESETEP",
[4] = "SETINTERFACE",
[5] = "SETCONFIGURATION",
$
Now 'perf trace' ioctl beautifier will translate this new ioctl to a
string and at some point will allow filtering the 'ioctl' syscall with
something like this in a system wide strace-like sessin:
# perf trace -e ioctl/cmd=USBDEVFS_CONNINFO_EX/
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-tkdfbgzqypwco96b309c0ovd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In addition to _IOW() and _IOR(), to handle this case:
#define USBDEVFS_CONNINFO_EX(len) _IOC(_IOC_READ, 'U', 32, len)
That will happen in the next sync of this header file.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-3br5e4t64e4lp0goo84che3s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Picking the changes from:
c5d3e39caa ("drm/i915: Engine discovery query")
a88b6e4cba ("drm/i915: Allow specification of parallel execbuf")
ee1136908e ("drm/i915/execlists: Virtual engine bonding")
6d06779e86 ("drm/i915: Load balancing across a virtual engine")
b81dde7194 ("drm/i915: Allow userspace to clone contexts on creation")
8319f44c05 ("drm/i915: Re-expose SINGLE_TIMELINE flags for context creation")
e620f7b3a2 ("drm/i915: Extend I915_CONTEXT_PARAM_SSEU to support local ctx->engine[]")
976b55f0e1 ("drm/i915: Allow a context to define its set of engines")
7f3f317a66 ("drm/i915: Restore control over ppgtt for context creation ABI")
75b3f1cb50 ("drm: Fix drm.h uapi header for GNU/kFreeBSD")
Silencing these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Now 'perf trace' and other code that might use the tools/perf/trace/beauty autogenerated
tables will be able to translate this new ioctl code into a string:
$ tools/perf/trace/beauty/drm_ioctl.sh > before
$ cp include/uapi/drm/i915_drm.h tools/include/uapi/drm/i915_drm.h
$ tools/perf/trace/beauty/drm_ioctl.sh > after
$ diff -u before after
--- before 2019-07-26 13:02:22.052723640 -0300
+++ after 2019-07-26 13:02:35.354906036 -0300
@@ -163,4 +163,6 @@
[DRM_COMMAND_BASE + 0x37] = "I915_PERF_ADD_CONFIG",
[DRM_COMMAND_BASE + 0x38] = "I915_PERF_REMOVE_CONFIG",
[DRM_COMMAND_BASE + 0x39] = "I915_QUERY",
+ [DRM_COMMAND_BASE + 0x3a] = "I915_GEM_VM_CREATE",
+ [DRM_COMMAND_BASE + 0x3b] = "I915_GEM_VM_DESTROY",
};
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Eric Anholt <eric@anholt.net>
Cc: James Clarke <jrtc27@jrtc27.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://lkml.kernel.org/n/tip-a9173whgu3h1vo24jgdg5do8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Thomas Gleixner:
"A pile of perf related fixes:
Kernel:
- Fix SLOTS PEBS event constraints for Icelake CPUs
- Add the missing mask bit to allow counting hardware generated
prefetches on L3 for Icelake CPUs
- Make the test for hypervisor platforms more accurate (as far as
possible)
- Handle PMUs correctly which override event->cpu
- Yet another missing fallthrough annotation
Tools:
perf.data:
- Fix loading of compressed data split across adjacent records
- Fix buffer size setting for processing CPU topology perf.data
header.
perf stat:
- Fix segfault for event group in repeat mode
- Always separate "stalled cycles per insn" line, it was being
appended to the "instructions" line.
perf script:
- Fix --max-blocks man page description.
- Improve man page description of metrics.
- Fix off by one in brstackinsn IPC computation.
perf probe:
- Avoid calling freeing routine multiple times for same pointer.
perf build:
- Do not use -Wshadow on gcc < 4.8, avoiding too strict warnings
treated as errors, breaking the build"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Mark expected switch fall-throughs
perf/core: Fix creating kernel counters for PMUs that override event->cpu
perf/x86: Apply more accurate check on hypervisor platform
perf/x86/intel: Fix invalid Bit 13 for Icelake MSR_OFFCORE_RSP_x register
perf/x86/intel: Fix SLOTS PEBS event constraint
perf build: Do not use -Wshadow on gcc < 4.8
perf probe: Avoid calling freeing routine multiple times for same pointer
perf probe: Set pev->nargs to zero after freeing pev->args entries
perf session: Fix loading of compressed data split across adjacent records
perf stat: Always separate stalled cycles per insn
perf stat: Fix segfault for event group in repeat mode
perf tools: Fix proper buffer size for feature processing
perf script: Fix off by one in brstackinsn IPC computation
perf script: Improve man page description of metrics
perf script: Fix --max-blocks man page description
Pull objtool fix from Thomas Gleixner:
"A single robustness fix for objtool to handle unbalanced CLAC
invocations under all circumstances"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Improve UACCESS coverage
Libbpf stores associated BTF FD per each instance of bpf_program. When
program is unloaded, that FD is closed. This is wrong, because leads to
a race and possibly closing of unrelated files, if application
simultaneously opens new files while bpf_programs are unloaded.
It's also unnecessary, because struct btf "owns" that FD, and
btf__free(), called from bpf_object__close() will close it. Thus the fix
is to never have per-program BTF FD and fetch it from obj->btf, when
necessary.
Fixes: 2993e0515b ("tools/bpf: add support to read .BTF.ext sections")
Reported-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Picking the changes from:
66bb8a065f ("KVM: x86: PMU Event Filter")
f087a02941 ("KVM: nVMX: Stash L1's CR3 in vmcs01.GUEST_CR3 on nested entry w/o EPT")
99adb56763 ("KVM: arm/arm64: Add save/restore support for firmware workaround state")
Silencing this perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm/include/uapi/asm/kvm.h'
diff -u tools/arch/arm/include/uapi/asm/kvm.h arch/arm/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h'
diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Now 'perf trace' and other code that might use the tools/perf/trace/beauty autogenerated
tables will be able to translate this new ioctl code into a string:
$ tools/perf/trace/beauty/kvm_ioctl.sh > before
$
$ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h
$ tools/perf/trace/beauty/kvm_ioctl.sh > after
$ diff -u before after
--- before 2019-07-26 12:32:47.959220236 -0300
+++ after 2019-07-26 12:33:05.766464871 -0300
@@ -79,6 +79,7 @@
[0xac] = "SET_ONE_REG",
[0xad] = "KVMCLOCK_CTRL",
[0xb0] = "GET_REG_LIST",
+ [0xb2] = "SET_PMU_EVENT_FILTER",
[0xb7] = "SMI",
[0xba] = "MEMORY_ENCRYPT_OP",
[0xbb] = "MEMORY_ENCRYPT_REG_REGION",
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Eric Hankland <ehankland@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Link: https://lkml.kernel.org/n/tip-py1gcmt6rboehlwg6zvagfg2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Alexei Starovoitov says:
====================
pull-request: bpf 2019-07-25
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) fix segfault in libbpf, from Andrii.
2) fix gso_segs access, from Eric.
3) tls/sockmap fixes, from Jakub and John.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6_flowlabel and ipv6_flowlabel_mgr are missing from
gitignore. Quentin points out that the original
commit 3fb321fde2 ("selftests/net: ipv6 flowlabel")
did add ignore entries, they are just missing the "ipv6_"
prefix.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Despite a proper NULL-termination after strncpy(..., ..., IFNAMSIZ - 1),
GCC8 still complains about *expected* string truncation:
xsk.c:330:2: error: 'strncpy' output may be truncated copying 15 bytes
from a string of length 15 [-Werror=stringop-truncation]
strncpy(ifr.ifr_name, xsk->ifname, IFNAMSIZ - 1);
This patch gets rid of the issue altogether by using memcpy instead.
There is no performance regression, as strncpy will still copy and fill
all of the bytes anyway.
v1->v2:
- rebase against bpf tree.
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXTi03RQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsToAQDvxZbyr7MSuDIJdeUlvZ4+d3vf8XVw
kUG5Kio6+m0rQwEA55lFhMfixGF2x7KnFnO2CXSu5GBVSdT0w+2vvZP+OAU=
=59XY
-----END PGP SIGNATURE-----
Merge tag 'ktest-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest fixlets from Steven Rostedt:
"This contains only simple spelling fixes"
* tag 'ktest-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Fix some typos in config-bisect.pl
A clang build reported an (obvious) double CLAC while a GCC build did not;
it turns out that objtool only re-visits instructions if the first visit
was with AC=0. If OTOH the first visit was with AC=1, it completely ignores
any subsequent visit, even when it has AC=0.
Fix this by using a visited mask instead of a boolean, and (explicitly)
mark the AC state.
$ ./objtool check -b --no-fp --retpoline --uaccess drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: .altinstr_replacement+0x22: redundant UACCESS disable
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: eb_copy_relocations.isra.34()+0xea: (alt)
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: .altinstr_replacement+0xffffffffffffffff: (branch)
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: eb_copy_relocations.isra.34()+0xd9: (alt)
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: eb_copy_relocations.isra.34()+0xb2: (branch)
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: eb_copy_relocations.isra.34()+0x39: (branch)
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: eb_copy_relocations.isra.34()+0x0: <=== (func)
Reported-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/617
Link: https://lkml.kernel.org/r/5359166aad2d53f3145cd442d83d0e5115e0cd17.1564007838.git.jpoimboe@redhat.com
Add a skip() message function that stops the test, logs an explanation,
and sets the "skip" return code (4).
Before loading a livepatch self-test kernel module, first verify that
we've built and installed it by running a 'modprobe --dry-run'. This
should catch a few environment issues, including !CONFIG_LIVEPATCH and
!CONFIG_TEST_LIVEPATCH. In these cases, exit gracefully with the new
skip() function.
Reported-by: Jiri Benc <jbenc@redhat.com>
Suggested-by: Shuah Khan <shuah@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
