SFF incorrectly assumed that ctl register is available for all
controllers while some old SFF controllers don't have ctl register.
Make SFF handle controllers w/o ctl register by conditionalizing ctl
register access and softreset method.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Some old SFF controllers don't have any way to reset the channel.
Currently, this isn't supported and libata EH causes an oops. Allow
LLDs w/o any reset method and just assume ATA class in such cases.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
The recent EHCI driver update to split the IAA watchdog timer out from
the other timers made several things work better, but not everything;
and it created a couple new issues in bugzilla. Ergo this patch:
- Handle a should-be-rare SMP race between the watchdog firing
and (very late) IAA interrupts;
- Remove a shouldn't-have-been-added WARN_ON() test;
- Guard against one observed OOPS;
- If this watchdog fires during clean HC shutdown, it should act
as a NOP instead of interfering with the shutdown sequence;
- Guard against silicon errata hypothesized by some vendors:
* IAA status latch broken, but IAAD cleared OK;
* IAAD wasn't cleared when IAA status got reported;
The WARN_ON is in bugzilla as 10168; the OOPS as 10078; these are
both regressions.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Tested-by: Gordon Farquharson <gordonfarquharson@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Here is a patch that adds support for the propox jtagcable II dongle
(http://www.propox.com/products/t_117.html): their PID was missing,
therefore we were not able to have the device recognized though it uses
a standard FTDI chip.
Signed-off-by: Mirko Bordignon <mirko.bordignon@ieee.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Since the header file gadget.h isn't being exported to userspace,
there seems to be little point having a __KERNEL__ proprocessor check.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Since the header file g_printer.h doesn't depend on __KERNEL__,
there's no need to unifdef it in the Kbuild file.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The patch fixes broken Kconfig caused by the name change of MPC834x option.
It also makes fsl_usb2_udc selectable on new platforms like MPC837x.
Signed-off-by: Li Yang <leoli@freescale.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This updates the option driver with a lot more novatel driver ids.
From: Dirk DeSchepper <ddeschepper@nvtl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add support for UPS Powercom USB interface (0d9f:0002) in chip CY7C63723.
In my case, this Powercom BNT800AP.
Signed-off-by: Dmitry Shapin <shapin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/storage/sddr55.c: In function 'sddr55_transport':
drivers/usb/storage/sddr55.c:526: warning: 'deviceID' may be used uninitialized in this function
drivers/usb/storage/sddr55.c:525: warning: 'manufacturerID' may be used uninitialized in this function
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Nobody should be using the generic usb-serial for anything other than
testing. Still, it's not a good thing that it's easy to lock up. There
is a traceback from NMI oopser here:
https://bugzilla.redhat.com/show_bug.cgi?id=431379
But in short, if a line discipline has a chance to echo anything, input
can loop back a write method. So, don't call tty_flip_buffer_push from
under a lock taken on write path.
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In drivers/pci/hotplug/ibmphp_ebda.c::ebda_rsrc_controller(), storage is
allocated with kzalloc() and assigned to 'tmp_slot'. Then lots of
stuff, like ->flag, ->supported_speed etc is set in tmp_slot. A bit
further down there's then this test :
if (!bus_info_ptr1) {
rc = -ENODEV;
goto error;
}
At this point, tmp_slot has not been assigned to anything, so when
erroring-out we want to free it, but nothing at the 'error:' label
free's 'tmp_slot' - and we can't really free 'tmp_slot' at 'error:'
since we may jump to that label later when 'tmp_slot' *has* been used
and we do not want it freed. So, the only sane option left seems to be
to kfree(tmp_slot) just before jumping to the 'error:' label in the one
place where this is what actually makes sense. The following patch does
just that and thus kills off a tiny potential memory leak.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
a) DECLARE_PCI_DEVICE_TABLE is misnamed. It is used to *define* tables,
not to declare them. It should be called DEFINE_PCI_DEVICE_TABLE.
b) It's lame, anyway. We could implement any number of such helper
thingies, but we choose not to.
So I wouldn't go adding code which uses this thing until it has a correct
name, and until we've decided that we actually want to live with it.
From: Andrew Morton <akpm@linux-foundation.org>
Cc: Jonas Bonn <jonas@southpole.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There's a bug in the current implementation of dma_get_required_mask()
where it ands the returned mask with the current device mask. This
rather defeats the purpose if you're using the call to determine what
your mask should be (since you will at that time have the default
DMA_32BIT_MASK). This bug results in any driver that uses this function
*always* getting a 32 bit mask, which is wrong.
Fix by removing the and with dev->dma_mask.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
libsas has a case where it uses the firmware loader to provide services,
but doesn't want to select it all the time. This currently causes a
compile failure in libsas if FW_LOADER=n. Fix this by providing error
stubs for the firmware loader API in the FW_LOADER=n case.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Due to some flaws in the initialization and flow control
code kernel oopses could be triggered e.g. when accessing
the card too early after insertion.
See e.g. kernel.org bug #10077.
The main part of the fix is a trivial state management
making sure the card is realy ready to use before allowing
any access.
Signed-off-by: Frank Seidel <fseidel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We need to initialize the kobject for a sysdev_class as it could have
been recycled (stupid static kobjects...)
We also do the same thing in case sysdev devices are being
re-registered.
Thanks to Balaji Rao <balajirrao@gmail.com> for pointing out the
problem.
Signed-off-by: Balaji Rao <balajirrao@gmail.com>
Tested-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The lguest launcher appends a space to the kernel command line (if kernel
arguments are specified on its command line). This space is unneeded. More
importantly, this appended space will make Red Hat's nash script interpreter
(used in a Fedora style initramfs) add an empty argument to init's command
line. This empty argument will make kernel arguments like "init=/bin/bash"
fail (because the shell will try to execute a script with an empty name).
This could be considered a bug in nash, but is easily fixed in the lguest
launcher too.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Ahmed managed to crash the Host in release_pgd(), which cannot be a Guest
bug, and indeed it wasn't.
The bug was that handing a 0 as the address of the toplevel page table
being manipulated can cause the lookup code in find_pgdir() to return
an uninitialized cache entry (we shadow up to 4 top level page tables
for each Guest).
Commit 37cc8d7f96 introduced this
behaviour in the Guest, uncovering the bug.
The patch which he submitted (which removed the /4 from the index
calculation) simply ensured that these high-indexed entries hit the
early exit path of guest_set_pmd(). But you get lots of segfaults in
guest userspace as the PMDs aren't being updated.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now the TSC code handles a zero return from calculate_cpu_khz(),
lguest can simply pass through the value it gets from the Host: if
non-zero, all the normal TSC code applies.
Otherwise (or if the Host really doesn't support TSC), the clocksource
code will fall back to the slower but reasonable lguest clock.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Robert Bragg's 5dc3318528 tightened
(ie. fixed) the checking in __get_vm_area, and it broke lguest.
lguest should pass the exact "end" it wants, not some random constant
(it was possible previously that it would actually get an address
different from SWITCHER_ADDR).
Also, Fabio Checconi pointed out that we should make sure we're not
hitting the fixmap area.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Robert Bragg <robert@sixbynine.org>
If req is LHREQ_INITIALIZE, and the guest has been initialized before
(unlikely), it will attempt to access cpu->tsk even though cpu is not yet
initialized.
Signed-off-by: Eugene Teo <eugeneteo@kernel.sg>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In some situations, ocfs2_set_nn_state might get called with sc = NULL and
valid = 0. If sc = NULL, we can't dereference it to get the o2nm_node
member. Instead, do what o2net_initialize_handshake does and use NULL when
calling o2net_reconnect_delay and o2net_idle_timeout.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
This patch addresses the bug in which the dlm_thread could go to sleep
while holding the dlm_spinlock.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Knowing the dlm recovery master helps in debugging recovery
issues. This patch prints a message on the recovery master node.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
dlm_master_request_handler() forgot to put a lockres when
dlm_assert_master_worker() failed or was skipped.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
During migration, the recovery master node may be asked to master a lockres
it may not know about. In that case, it would not only have to create a
lockres and add it to the hash, but also remember to to do the _put_
corresponding to the kref_init in dlm_init_lockres(), as soon as the migration
is completed. Yes, we don't wait for the dlm_purge_lockres() to do that
matching put. Note the ref added for it being in the hash protects the lockres
from being freed prematurely.
This patch adds that missing put, as described above, to plug a memleak.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Normally locks for remote nodes are freed when that node sends an UNLOCK
message to the master. The master node tags an DLM_UNLOCK_FREE_LOCK action
to do an extra put on the lock at the end.
However, there are times when the master node has to free the locks for the
remote nodes forcibly.
Two cases when this happens are:
1. When the master has migrated the lockres plus all locks to another node.
2. When the master is clearing all the locks of a dead node.
It was in the above two conditions that the dlm was missing the extra put.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
In ocfs2_group_add, 'cr' is a disk field of type 'ocfs2_chain_rec', and we
were putting cpu byteorder values into it. Swap things to the right endian
before storing.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
struct dlm_query_join_packet is made up of four one-byte fields. They
are effectively in big-endian order already. However, little-endian
machines swap them before putting the packet on the wire (because
query_join's response is a status, and that status is treated as a u32
on the wire). Thus, a big-endian and little-endian machines will
treat this structure differently.
The solution is to have little-endian machines swap the structure when
converting from the structure to the u32 representation.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
__dlm_print_one_lock_resource must be called with spin_lock
the res->spinlock. While in some cases, we use it without this
precondition and lead to the failure of assert_spin_locked.
So call dlm_print_one_lock_resource instead.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
fs/ocfs2/dlm/dlmdomain.c: In function 'dlm_send_join_cancels':
fs/ocfs2/dlm/dlmdomain.c:983: warning: format '%u' expects type 'unsigned int', but argument 7 has type 'long unsigned int'
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
This has been around for a while but nobody reported it until recently.
Resubmitting the fix as it's appropriate for 2.6.25
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The cxbg3 driver is unnecessarily decreasing the number of CQ entries by
one when creating a CQ. This will cause the CQ not to have as many
entries as requested by the user if the user requests a power of 2 size.
Signed-off-by: Jon Mason <jon@opengridcomputing.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt:
time: remove obsolete CLOCK_TICK_ADJUST
time: don't touch an offlined CPU's ts->tick_stopped in tick_cancel_sched_timer()
time: prevent the loop in timespec_add_ns() from being optimised away
ntp: use unsigned input for do_div()
This fixes a boot panic due to a typo in the recent iommu patchset from
FUJITA Tomonori <tomof@acm.org> - the code used dma_get_max_seg_size()
instead of dma_get_seg_boundary().
It also removes a couple of unnecessary BUG_ON() and ALIGN() macros.
Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reported-and-tested-by: Bob Tracy <rct@frus.com>
Acked-by: FUJITA Tomonori <tomof@acm.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We currently set the root-domain online span automatically when the
domain is added to the cpu if the cpu is already a member of
cpu_online_map.
This was done as a hack/bug-fix for s2ram, but it also causes a problem
with hotplug CPU_DOWN transitioning. The right way to fix the original
problem is to actually respond to CPU_UP events, instead of CPU_ONLINE,
which is already too late.
This solves the hung reboot regression reported by Andrew Morton and
others.
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The first version of the ntp_interval/tick_length inconsistent usage patch was
recently merged as bbe4d18ac2http://git.kernel.org/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=bbe4d18ac2e058c56adb0cd71f49d9ed3216a405
While the fix did greatly improve the situation, it was correctly pointed out
by Roman that it does have a small bug: If the users change clocksources after
the system has been running and NTP has made corrections, the correctoins made
against the old clocksource will be applied against the new clocksource,
causing error.
The second attempt, which corrects the issue in the NTP_INTERVAL_LENGTH
definition has also made it up-stream as commit
e13a2e61ddhttp://git.kernel.org/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=e13a2e61dd5152f5499d2003470acf9c838eab84
Roman has correctly pointed out that CLOCK_TICK_ADJUST is calculated
based on the PIT's frequency, and isn't really relevant to non-PIT
driven clocksources (that is, clocksources other then jiffies and pit).
This patch reverts both of those changes, and simply removes
CLOCK_TICK_ADJUST.
This does remove the granularity error correction for users of PIT and Jiffies
clocksource users, but the granularity error but for the majority of users, it
should be within the 500ppm range NTP can accommodate for.
For systems that have granularity errors greater then 500ppm, the
"ntp_tick_adj=" boot option can be used to compensate.
[johnstul@us.ibm.com: provided changelog]
[mattilinnanvuori@yahoo.com: maek ntp_tick_adj static]
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Acked-by: john stultz <johnstul@us.ibm.com>
Signed-off-by: Matti Linnanvuori <mattilinnanvuori@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: mingo@elte.hu
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Silences WARN_ONs in rcu_enter_nohz() and rcu_exit_nohz(), which appeared
before caused by (repeated) calls to:
$ echo 0 > /sys/devices/system/cpu/cpu1/online
$ echo 1 > /sys/devices/system/cpu/cpu1/online
Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: johnstul@us.ibm.com
Cc: Rafael Wysocki <rjw@sisk.pl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Since some architectures don't support __udivdi3().
Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The kernel NTP code shouldn't hand 64-bit *signed* values to do_div(). Make it
instead hand 64-bit unsigned values. This gets rid of a couple of warnings.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In commit ee7c82da83 ("wait_task_stopped:
simplify and fix races with SIGCONT/SIGKILL/untrace"), the magic (short)
cast when storing si_code was lost in wait_task_stopped. This leaks the
in-kernel CLD_* values that do not match what userland expects.
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
