This driver only supports a single "boardtype". Remove the unneeded
boardinfo struct and its use in the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver only supports a single "boardtype". Remove the unneeded
boardinfo struct and its use in the driver. Change the "driver_name"
to match what the boardinfo supplied.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver is incomplete and seriously broken. It can't be enabled
in the Kconfig and it's not even set up to be compiled.
Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clang detected this macro expansion bug:
drivers/staging/rtl8192u/r8192U_core.c:2384:76: warning: operator '?:'
has lower precedence than '+'; '+' will be evaluated first
[-Wparentheses]
The line from the .c file looks like this:
u1bAIFS = qos_parameters->aifs[i] * ((mode&(IEEE_G|IEEE_N_24G)) ?9:20) + aSifsTime;
We need to put parenthesis around the entire macro to fix the bug.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
..instead of the i2c_driver hooks. This should silence the following
runtime warnings:
[ 17.820321] i2c-core: driver [olpc_dcon] using legacy suspend method
[ 17.846082] i2c-core: driver [olpc_dcon] using legacy resume method
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This code looks in the PCI config space for pin addresses and sets up some
stuff. However, Openfirmware has already done this for us, so there's no
need to ever do it in Linux. According to Mitch Bradley, this OFW has been
doing this for us since at least B3 builds (pre-mass production).
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously we registered a notifier block to inform us of any framebuffer
device changes; if the screen was blanked or unblanked, we'd put the DCON
to sleep or wake it up.
Turns out that the backlight code registers a notifier block as well
and calls the update_status hook, so we can just use that to put the DCON
to sleep. For those status updates where the blanking isn't changed,
dcon_sleep will do nothing.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Another global variable (dcon_wait_queue) moved into the dcon_priv struct.
In the process, replace an instance of a manually implemented
wait_event_timeout. This code came from Jordan's original gxfb_dcon.c
driver waaaay back in 2006; well past time for a replacement.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'useaa' module parameter was a workaround for a buggy DCON prototype
not supporting the optional anti-aliasing mode properly. There's no
reason to disable it any more, so drop the option.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace firmware upgrade API in download_image().
Signed-off-by: Macpaul Lin <macpaul.from.taiwan@gmail.com>
Cc: Macpaul Lin <macpaul@gmail.com>
Cc: Paul Stewart <pstew@chromium.org>
Cc: Ben Chan <benchan@chromium.org>
Cc: Sage Ahn <syahn@gctsemi.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix compile error when enable DEBUG_SDU and DEBUG_HCI.
Replace deprecated NIPQUAD marco to C code.
Signed-off-by: Macpaul Lin <macpaul.from.taiwan@gmail.com>
Cc: Macpaul Lin <macpaul@gmail.com>
Cc: Paul Stewart <pstew@chromium.org>
Cc: Ben Chan <benchan@chromium.org>
Cc: Sage Ahn <syahn@gctsemi.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch reverses the condition in two if
statements in CopyBufferToControlPacket to
place Adapter->bShutStatus and
Adapter->idleMode to the left of the equal
"==" sign, and TRUE to the right of
the equal "==" sign. This was done for
readability purposes.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch cleans up the code in function
CopyBufferToControlPacket. Several things are
being done here: (1) remove the null
initialization from variable cntrl_buff, (2)
reverse the if statement to check if cntrl_buff
is null; if so, then write debug statement and
return -ENOMEM error code, and (3) indent the
code properly.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch renames uppercase INT to
"int" in Misc.c, and removes one
white space issue.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch renames uppercase UINT to
"unsigned int" in Misc.c.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch renames uppercase B_UINT32 to
"unsigned int" in Misc.c.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch renames uppercase B_UINT8 to
"unsigned char" in Misc.c.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch renames uppercase PUINT to
"unsigned int *" in Misc.c.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch renames uppercase VOID to
void in Misc.c.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch renames uppercase PVOID to
"void *" in Misc.c.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes a potential null dereference
from InterfaceMisc.c, function InterfaceWRM. This
error was reported by Smatch.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes a potential null dereference
from InterfaceMisc.c, function InterfaceRDM. This
error was reported by Smatch.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes an unneeded do while loop which
sends a control message to bcm usb device. In this case,
the loop executes once because usRetries is
initialized to zero. After the first iteration
this variable will be 1. Therefore, the statement:
"usRetries < MAX_RDM_WRM_RETIRES" will evaluate to
false causing the do while statement to execute
once because MAX_RDM_WRM_RETIRES is equal to 1.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes an unneeded do while loop which
sends a control message to bcm usb device. In this case,
the loop executes once because usRetries is
initialized to zero. After the first iteration
this variable will be 1. Therefore, the statement:
"usRetries < MAX_RDM_WRM_RETIRES" will evaluate to
false causing the do while statement to execute
once because MAX_RDM_WRM_RETIRES is equal to 1.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch renames uppercase VOID to
void in InterfaceMisc.c.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch changes the style of comparing
structures to null. Instead of this:
"if (foo == NULL) {" or "if (foo != NULL) {",
the new logic uses: "if (!foo) {" or
"if (foo) {".
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch renames uppercase PVOID to
"void *" in InterfaceMisc.c.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch renames uppercase USHORT to
unsigned short in InterfaceMisc.c.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch renames uppercase UINT to
unsigned int in InterfaceMisc.c.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch renames uppercase INT to int
in InterfaceMisc.c.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch renames all local variables in
function GetNextTargetBufferLocation for
readability purposes.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a POINTER_LOCATION error(changed foo* bar to foo *bar)
and an ASSIGN_IN_IF error(moved assignment out of if condition).
Signed-off-by: Pranav Ravichandran <me@onloop.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the module_pci_driver() macro to make the code simpler
by eliminating module_init and module_exit calls.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case it is not possible to remap the memory, it returns 0 and
the driver thinks that everything went fine.
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the name used by the standard.
Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There also is a MEM16 space. This will make it clear which one is
which, once support for MEM16 space is added.
Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that we have the infrastructure to use the regular function in place
and all existing users are converted, remove the map and unmap callbacks
from the ipack_bus_device->ops.
Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the regular ioremap functions and their managed counterparts instead
of the ones provided through IPack callbacks.
Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
By doing so we can remove ipoctal_check_model() and we also no longer need
to map the IPACK_ID_SPACE.
Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This will allow us to use the regular ioremop functions.
Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Constant renames:
- Rename TPCI200_*_GAP to TPCI200_*_INTERVAL.
- Rename TPCI200_MEM*_* to TPCI200_MEM*_SPACE_* (to match the other SPACE
constants.
Make tpci200_status_timeout and tpci200_status_error const.
Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tpci200_register is converted to use this.
A later patch will build on this.
Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously the *_phys fields were of type ipack_addr_space, which use
void pointers to refer to memory addresses. Since the *_phys fields
refer to unmapped memory, this is not correct. Introduce a new struct
ipack_region (which uses phys_addr_t to refer to the start of a region)
and use that as a replacement for struct ipack_addr_space.
struct ipack_region is defined in ipack.h because it is planned to later
expose the physical addressed to the IPack Module drivers.
Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the unused pointers to these spaces.
Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
